Consolidate CI on codex-maintenance.sh; clean up dead scripts and docs

Both check-nixos.yml workflows (GitHub + Gitea) now call scripts/codex-maintenance.sh instead of a hand-rolled eval-only loop, closing a real gap: CI previously enforced none of the secret grep, nixpkgs-fmt, or statix checks that codex-maintenance.sh already runs locally — nothing was stopping that from regressing. One script now backs both, instead of two copies that can drift from each other. codex-maintenance.sh itself is extended to cover buildable surface that wasn't validated anywhere before: packages.x86_64-linux.*, plus config.system.build.tarball (lxc-* hosts) and config.system.build.diskoImagesScript (proxmox-*, excluding the installer's own proxmox-lxc target, which has no disko config). Also: - scripts/prepare-host-key.sh: dropped the redundant [path-to-nixos-repo] parameter — it always defaults to the repo the script itself lives in now, so a second argument never made sense after the nix-auto-installer migration. - Removed prepare.sh (dead pre-disko manual parted/mkfs/mkswap partitioning, fully superseded) and scripts/create-linode-installer-disk.sh (incomplete draft for an abandoned dd-via-rescue-mode approach; Linode hosts already deploy fine through the normal auto-installer flow). - docs/pxe-boot.md: fixed a stale `nixosConfigurations.pxe-boot` eval command (pre-refactor flat name, not a real flake attribute anymore) and added a cross-reference to docs/auto-installer.md. - CLAUDE.md/README.md: full documentation pass reconciling this session's changes — modules/installer/, modules/pxe-boot/, the LXC/Proxmox image-building deployment paths, corrected the password-hash/SSH-key locations in the safety-rules section (both had drifted to reference files/paths that no longer exist), and added session-workflow guidance to prefer targeted host evals over full-repo sweeps for incremental changes (explicitly scoped to interactive sessions, not CI). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01La55Nsss8jZ7ZuzUV9mfot
Register sops age key for proxmox-minimal
2026-07-20 07:02:23 +10:00 · 2026-07-20 07:01:56 +10:00 · 2026-07-20 07:01:33 +10:00 · 2026-07-20 05:58:56 +10:00 · 2026-07-20 04:41:34 +10:00 · 2026-07-20 04:08:19 +10:00
45 changed files with 230 additions and 2600 deletions
@@ -3,19 +3,9 @@
 result
 result-*

-# Disko's proxmox-* image-builder writes the finished .raw disk image
-# directly into the current directory, not into a result-* symlink (see
-# docs/proxmox-images.md, scripts/create-proxmox-resource.sh) — several GB
-# each, never meant to be committed.
-*.raw
-
 # Ignore automatically generated direnv output
 .direnv

-# Python bytecode cache (scripts/lib/*.py)
-__pycache__/
-*.pyc
-
 # Locally-generated SSH host keys staged for transfer to a new machine
 # during install (see scripts/prepare-host-key.sh) — never commit these.
 host-keys/
@@ -7,7 +7,7 @@ servers and workstation.

 The flake exposes NixOS configurations named `<platform>-<buildtype>`
 (platforms: `linode`, `proxmox`, `lxc`; build types: `minimal`, `nix-cache`,
-`server`, `docker`, `gui`, `pxe-boot`, `tailscale-exit-node`), generated from `modules/platforms/*`
+`server`, `docker`, `gui`, `pxe-boot`), generated from `modules/platforms/*`
 and `modules/build-types/*` by the `mkTarget` function in `flake.nix`. Not
 every combination is built — `pxe-boot` has no `linode` variant. See
 `README.md` for the full current target list; treat `flake.nix` as the
@@ -62,83 +62,14 @@ There is no test suite — "correctness" here means the flake evaluates and
 sweeps: after editing one or two hosts/modules, evaluate just the
 `nixosConfigurations.<host>` you touched (plus any `config.system.build.tarball`
 /`diskoImagesScript`/package output affected) rather than looping over every
-host — `codex-maintenance.sh` evaluates every `nixosConfigurations` host plus
-every package/tarball/image variant and is slow to run after each small
-change. Reserve a full
+host — `codex-maintenance.sh` evaluates 19 hosts plus every package/tarball/
+image variant now and is slow to run after each small change. Reserve a full
 `codex-maintenance.sh` run for changes that plausibly affect every host
 (`modules/common/*`, `flake.nix`, `variables.nix`) or as a final check before
 committing. This is a session-workflow preference only — it does not apply to
 CI, which should keep running the full script on every push/PR regardless of
 diff size; that's the point of it.

-## Scripts
-
-Beyond `codex-setup.sh`/`codex-maintenance.sh` above, `scripts/` also has:
-
- `scripts/sync-host-keys.sh` — generates/registers SSH host keys and their
-  `.sops.yaml`/`secrets/*.yaml` recipients for flake targets, idempotently
-  (`--all`, `<target>`, `--remove`, `--regenerate-all-keys`, all with
-  `--dry-run`). The primary tool for provisioning a new host's secrets
-  access — see "Creating a new machine" in `docs/auto-installer.md`.
- `scripts/prepare-host-key.sh` — narrower predecessor: generates a key by
-  an arbitrary name without touching `.sops.yaml`. Still useful to
-  pre-generate a key before its flake target exists yet, since
-  `sync-host-keys.sh` can only act on targets `nixosConfigurations` already
-  has.
- `scripts/create-proxmox-resource.sh` — builds a `lxc-*`/`proxmox-*`
-  target's tarball/disk image and creates it on a real Proxmox node
-  (`pct create` against the tarball as a CT template / `qm create`+
-  `importdisk`), or reconfigures an existing resource's cores/memory/disk
-  size (`--modify`, always requires typing the VMID back to confirm).
-  Checks for an already-uploaded image on the node before building
-  (`--force-rebuild` to skip that and always rebuild), and probes
-  nix-cache's substituter/remote-builder reachability once up front rather
-  than letting every `nix build` call retry against it individually.
-  Refuses to create a target whose host identity already exists live on
-  the node (checked directly via `qm`/`pct`, not any file in this repo)
-  unless `--allow-duplicate-host` is passed. `--dry-run` throughout both
-  modes.
- `scripts/env.sh` — shared config (`PROXMOX_HOST`, storage pool, bridge,
-  default cores/memory) sourced by `create-proxmox-resource.sh`. Add new
-  cross-script config here instead of duplicating it per-script.
- `scripts/bump-nixpkgs-release.sh` — bumps `flake.nix`'s `nixpkgs.url`/
-  `home-manager.url` in place. Exists because flake input URLs can't
-  reference `variables.nix` (confirmed empirically — `nix flake metadata`
-  errors on it), so this is the closest equivalent to a single source of
-  truth for the tracked release.
- `scripts/rotate-admin-key.sh <backup-admin-key> [--new-key-file <path>]
-  [--dry-run]` — rotates `.sops.yaml`'s `&admin` age key: decrypts with a
-  backed-up copy of the key currently trusted as `&admin` (verified by
-  deriving its public key and comparing, not taken on faith), replaces the
-  `&admin` line with a new key already present in the environment
-  (defaults to wherever sops/age itself would look), and runs
-  `sops updatekeys` on every `secrets/*.yaml`. One-way: the old key can no
-  longer decrypt anything re-encrypted this way. This is the automation
-  for the manual steps `sync-host-keys.sh`/`create-proxmox-resource.sh`
-  print when they bootstrap a brand-new, not-yet-trusted key on a machine
-  with no prior admin access.
- `scripts/backup-admin-key.sh <dest-path> [--key-file <path>] [--force]
-  [--dry-run]` — copies the local sops age key (source resolution matches
-  sops/age itself: `$SOPS_AGE_KEY` inline, then `--key-file`, then
-  `$SOPS_AGE_KEY_FILE`, then the XDG default) to an arbitrary destination
-  path with `0600` permissions, validating it's a real age identity and
-  round-tripping the public key before and after the write. Refuses to
-  overwrite an existing `<dest-path>` without `--force`. Purely a local
-  filesystem copy — never touches `.sops.yaml`/`secrets/*.yaml` or the
-  repo at all. The resulting file is exactly what `rotate-admin-key.sh`
-  expects as its backup-key argument.
-
-`sync-host-keys.sh`, `create-proxmox-resource.sh`, and
-`rotate-admin-key.sh` genuinely mutate real state when run for real (not
-`--dry-run`): real `secrets/*.yaml` recipients, real Proxmox VMs/
-containers, real revocation of decrypt access. They require the
-operator's own SSH/sops access, which an agent session doesn't have — but
-don't suggest running any of them non-dry-run without the operator's
-explicit go-ahead even if it becomes technically reachable.
-`backup-admin-key.sh` only writes a key copy to a path the operator gives
-it — lower-stakes than the others, but it still handles a real private
-key, so treat its destination path choice as the operator's call too.
-
 ## Architecture

 `flake.nix` is the single entry point. It generates one
@@ -160,10 +91,9 @@ nixosSystem {
 ```

 Platforms: `linode`, `proxmox`, `lxc`. Build types: `minimal`, `nix-cache`,
-`server`, `docker`, `gui`, `pxe-boot`, `tailscale-exit-node`. Not every
-combination is built — e.g. `pxe-boot` has no `linode` variant (PXE/DHCP/TFTP
-need LAN L2 adjacency a Linode VPS doesn't have). Treat `flake.nix`'s
-`generatedTargets` as the source
+`server`, `docker`, `gui`, `pxe-boot`. Not every combination is built — e.g.
+`pxe-boot` has no `linode` variant (PXE/DHCP/TFTP need LAN L2 adjacency a
+Linode VPS doesn't have). Treat `flake.nix`'s `generatedTargets` as the source
 of truth for which hosts exist — `README.md`, `AGENTS.md`,
 `docs/flake-lock-automation.md`, and the CI eval workflows
 (`.github/workflows/check-nixos.yml`, `.gitea/workflows/check-nixos.yml`) list
@@ -185,12 +115,10 @@ removing a host.
  from `flake.nix`. `lxc.nix` has no hardware-configuration counterpart since
  containers share the host kernel; instead it imports nixpkgs' own
  `virtualisation/proxmox-lxc.nix`, which gives every `lxc-*` host a
-  `config.system.build.tarball` output — a plain rootfs tarball, used as a
-  `pct create ... vztmpl` CT template (**not** `pct restore`, which expects
-  `vzdump` backup-archive metadata this doesn't have), no install step —
-  see `docs/auto-installer.md`.
+  `config.system.build.tarball` output (`pct restore`-ready, no install step
+  — see `docs/auto-installer.md`).
 - `modules/build-types/*.nix` — what a system is for:
-  minimal/server/docker/gui/pxe-boot/nix-cache/tailscale-exit-node.
+  minimal/server/docker/gui/pxe-boot/nix-cache.
 - `modules/common/configuration.nix` — base NixOS config imported by every
  host: locale, users, nix settings, git.
 - `modules/common/home.nix` / `hosts/nixos/home.nix` — Home Manager config for
@@ -201,17 +129,11 @@ removing a host.
  `lxc-*`). Also carries `imageSize`/`imageName`, letting every `proxmox-*`
  host be built as a standalone, `qm importdisk`-ready `.raw` image with no
  install step — see `docs/proxmox-images.md`.
- `modules/disko/linode.nix` — `linode-*`'s disko config, deliberately
-  different in kind from the Proxmox one: Linode provisions and sizes
-  `/dev/sda`/`/dev/sdb` itself as whole, unpartitioned devices before the OS
-  boots, so this declares them with `destroy = false` (disko never wipes
-  them) and a bare `filesystem`/`swap` content type instead of a partition
-  table — idempotent against an already-provisioned disk, never destructive.
 - `modules/boot/efi.nix` — systemd-boot + EFI vars, paired with the disko module.
- `modules/installer/` — the auto-installer environment (ISO, also served as
-  PXE netboot): `common.nix` (shared config + the generated
-  `auto-install.sh`), `iso.nix`, `host-keys.nix` (optionally bakes
-  `host-keys/` into the image under `--impure`). See
+- `modules/installer/` — the auto-installer environment (ISO/netboot/Proxmox
+  LXC): `common.nix` (shared config + the generated `auto-install.sh`),
+  `iso.nix`/`proxmox-lxc.nix` (per-variant), `host-keys.nix` (optionally
+  bakes `host-keys/` into the image under `--impure`). See
  `docs/auto-installer.md`.
 - `modules/pxe-boot/stage-installer-artifacts.nix` — builds the installer's
  netboot image and stages it on the `pxe-boot` host so its iPXE menu can
@@ -10,7 +10,7 @@ pieces composed in `flake.nix`:

 - **Platforms** (what it runs on): `linode`, `proxmox`, `lxc`
 - **Build types** (what it's for): `minimal`, `nix-cache`, `server`, `docker`,
-  `gui`, `pxe-boot`, `tailscale-exit-node`
+  `gui`, `pxe-boot`

 Not every combination exists — `pxe-boot` has no `linode` variant, since
 PXE/DHCP/TFTP need LAN L2 adjacency that a Linode VPS doesn't have. The full
@@ -18,23 +18,14 @@ list:

 | Target | Purpose |
 | --- | --- |
-| `linode-minimal` | Minimal NixOS host profile on a Linode VPS |
-| `proxmox-minimal` | Minimal NixOS host profile on Proxmox — previously the flat `nix-minimal` target |
+| `linode-minimal` | Minimal NixOS host profile on a Linode VPS (real, deployed) |
+| `proxmox-minimal` | Minimal NixOS host profile on Proxmox (real, deployed — previously the flat `nix-minimal` target) |
 | `lxc-minimal` | Minimal NixOS host profile in a Proxmox LXC container |
-| `linode-nix-cache` / `proxmox-nix-cache` / `lxc-nix-cache` | Local Nix binary cache and remote builder — previously the flat `nix-cache` target |
-| `linode-server` / `proxmox-server` / `lxc-server` | Storage, NFS, backup, and monitoring exporter host — previously the flat `server` target |
-| `linode-docker` / `proxmox-docker` / `lxc-docker` | Docker host for the main container stack — previously the flat `docker` target |
-| `linode-gui` / `proxmox-gui` / `lxc-gui` | Cinnamon desktop workstation — previously the flat `nixos` target |
-| `proxmox-pxe-boot` / `lxc-pxe-boot` | HTTP/iPXE boot asset host — previously the flat `pxe-boot` target |
-| `linode-tailscale-exit-node` / `proxmox-tailscale-exit-node` / `lxc-tailscale-exit-node` | Tailscale exit node |
-
-Which variant of a given buildtype is actually deployed isn't tracked
-anywhere in this repo — that's live infrastructure state, not something a
-committed file can keep accurate, and it changes independently of the code.
-Check the Proxmox node itself, or `/etc/flake-target` on a running host (see
-below), if you need to know what's really out there right now.
-`scripts/create-proxmox-resource.sh`'s duplicate-host guard works the same
-way: it checks the Proxmox node directly rather than any file here.
+| `linode-nix-cache` / `proxmox-nix-cache` / `lxc-nix-cache` | Local Nix binary cache and remote builder (`proxmox-nix-cache` is the real, deployed one — previously the flat `nix-cache` target) |
+| `linode-server` / `proxmox-server` / `lxc-server` | Storage, NFS, backup, and monitoring exporter host (`proxmox-server` is the real, deployed one — previously the flat `server` target) |
+| `linode-docker` / `proxmox-docker` / `lxc-docker` | Docker host for the main container stack (`proxmox-docker` is the real, deployed one — previously the flat `docker` target) |
+| `linode-gui` / `proxmox-gui` / `lxc-gui` | Cinnamon desktop workstation (`proxmox-gui` is the real, deployed one — previously the flat `nixos` target) |
+| `proxmox-pxe-boot` / `lxc-pxe-boot` | HTTP/iPXE boot asset host (`proxmox-pxe-boot` is the real, deployed one — previously the flat `pxe-boot` target) |

 Each buildtype's `hosts/<name>/host.nix` carries the per-machine identity
 (hostname, hostId, per-machine secrets, `system.stateVersion`) that must stay
@@ -55,17 +46,17 @@ nix eval --json .#nixosConfigurations --apply builtins.attrNames | jq -r '.[]'
 | Path | Purpose |
 | --- | --- |
 | `flake.nix` | Flake inputs, the `mkTarget` platform × build-type generator, and `nixosConfigurations` outputs |
-| `variables.nix` | Single source of truth for shared values (LAN domain/CIDR, hostnames, timezone, primary username, storage root, NFS share subpaths/mountpoints, service ports, ...) — passed to every module and Home Manager config as the `vars` argument via `specialArgs`/`extraSpecialArgs` |
+| `variables.nix` | Single source of truth for shared values (LAN domain/CIDR, hostnames, timezone, primary username, storage root, ...) — passed to every module and Home Manager config as the `vars` argument via `specialArgs`/`extraSpecialArgs` |
 | `hosts/<name>/host.nix` | Per-machine identity: hostname, hostId, per-machine secrets, `system.stateVersion` |
 | `hosts/nixos/home.nix` | Workstation-specific Home Manager config (used by the `gui` build type) |
 | `modules/platforms/` | Platform-specific config: virtualisation guest tools, boot method, hardware config (`linode.nix`, `proxmox.nix`, `lxc.nix`) |
 | `modules/build-types/` | Build-type-specific config: what makes a system minimal/server/docker/gui/pxe-boot/nix-cache |
 | `modules/common/` | Shared NixOS config, Home Manager, aliases imported by every host |
 | `modules/nix-cache/` | Binary cache and remote builder client/server modules |
-| `modules/installer/` | Auto-installer environment (ISO, also served as PXE netboot) — see `docs/auto-installer.md` |
+| `modules/installer/` | Auto-installer environment (ISO/netboot/Proxmox LXC) — see `docs/auto-installer.md` |
 | `host-keys/` | Gitignored, locally-generated SSH host keys for the auto-installer — see `docs/auto-installer.md` |
 | `docs/` | Operational notes for cache, builders, lock updates, boot services, the auto-installer, and Proxmox image builds |
-| `scripts/` | Codex setup, validation, host-key, release-bump, and Proxmox resource helpers |
+| `scripts/` | Codex setup, validation, and host-key-prep helpers |

 ## Validation

@@ -102,22 +93,14 @@ Three different paths depending on target, none of them involving a manual
 `nixos-rebuild switch` from this repo:

 - Most hosts: boot the auto-installer, pick the target from its menu — see
-  `docs/auto-installer.md`. Every menu target has a Disko config the
-  installer formats unconditionally (`docs/auto-installer.md`'s "Storage"
-  section covers how this stays non-destructive for `linode-*`, whose disks
-  Linode itself provisions ahead of time).
+  `docs/auto-installer.md`.
 - `lxc-*` targets: not installed at all — build a ready-to-run container
-  tarball and `pct create` it as a CT template directly. `docs/auto-installer.md`
-  covers why (and the installer's menu excludes them for the same reason).
+  tarball and `pct restore` it directly. `docs/auto-installer.md` covers why
+  (and the installer's menu excludes them for the same reason).
 - `proxmox-*` targets: can alternatively be built as a standalone `.raw`
  disk image and attached to a new VM with no install step — see
  `docs/proxmox-images.md`.

-`scripts/create-proxmox-resource.sh --type lxc|vm --host <name>` automates
-either of the last two end to end (build, host-key registration, upload,
-`pct create`/`qm create`), with `--dry-run` and a guard against duplicating
-an already-deployed host's identity. See its `--help`.
-
 ## Security Notes

 Do not commit tokens, private keys, live credentials, or new password hashes
@@ -5,9 +5,8 @@ install any host exposed by its own `nixosConfigurations`. It was migrated
 from a formerly-separate `nix-auto-installer` repo — everything it did now
 lives here.

-The installer provides a small NixOS install environment (ISO, or the same
-image netbooted via PXE) with SSH access, Git support, and an interactive
-installation script.
+The installer provides a small NixOS install environment (ISO/netboot/Proxmox
+LXC) with SSH access, Git support, and an interactive installation script.
 Logging in as any user (root or `nixos`) runs `/etc/auto-install.sh`,
 discovers available hosts from this same flake, lets the operator choose a
 target, applies that host's Disko storage configuration, installs NixOS, and
@@ -19,7 +18,7 @@ see "LXC hosts" immediately below for why those are different.**
 ## LXC hosts

 `lxc-*` targets (`lxc-minimal`, `lxc-nix-cache`, `lxc-server`, `lxc-docker`,
-`lxc-gui`, `lxc-pxe-boot`, `lxc-tailscale-exit-node`) are **not** installed via `auto-install.sh` — the
+`lxc-gui`, `lxc-pxe-boot`) are **not** installed via `auto-install.sh` — the
 interactive menu deliberately excludes them. Don't try to select one there;
 `nixos-install` would bind-mount `/` onto `/mnt` (LXC containers have no raw
 disk to partition) and then refuse to touch the filesystem it's currently
@@ -34,76 +33,16 @@ container image, no install step at all:
 nix build .#nixosConfigurations.lxc-minimal.config.system.build.tarball
 ```

-This is a plain rootfs tarball, not a `vzdump` backup archive — restoring it
-with `pct restore` fails ("archive contains no configuration file"), since
-that command expects backup-archive metadata this tarball doesn't have. Use
-it as a CT *template* instead: drop it under Proxmox's template storage
-(conventionally `/var/lib/vz/template/cache/` for the `local` storage, or
-the GUI's "Create CT" → upload-as-template flow) and create a container
-from it, supplying all config on the command line since a template has none
-of its own:
+Then, on the Proxmox host, `pct restore` (or the GUI's "Create CT" → upload
+template flow) that tarball directly as a new container. First boot runs
+`boot.postBootCommands` (registers the Nix store DB and system profile) —
+there's no separate activation step to run yourself.

-```sh
-pct create <vmid> local:vztmpl/<file>.tar.xz \
-  --unprivileged 1 --features nesting=1,keyctl=1 \
-  --rootfs local-lvm:8 --hostname <name> --cores 2 --memory 2048 --swap 2048 \
-  --net0 name=eth0,bridge=vmbr0,ip=dhcp
-pct start <vmid>
-```
-
-Every one of those extra flags is load-bearing, confirmed by actually
-booting one:
-
- `--unprivileged 1` — `modules/platforms/lxc.nix` sets
-  `proxmoxLXC.privileged = false`, so the image assumes it's running
-  unprivileged. `pct create`'s own CLI default for this flag is
-  privileged (unlike the web UI, whose checkbox defaults the other way)
-  — omit it and you get a privileged container running a NixOS config
-  that assumes unprivileged, a real mismatch.
- `--features nesting=1,keyctl=1` — required for a modern (v247+)
-  systemd guest to boot unprivileged at all. Without it, AppArmor denies
-  the nested user namespaces and credential mounts systemd routinely
-  uses (even plain getty units) — every getty crash-loops on a denied
-  `/run/credentials/*` mount every ~3s (this is what garbage on the
-  console turns out to be) while core services like `nsncd` fail the
-  same way, and the system never finishes activating.
- `--swap 2048` — `--memory` doesn't touch swap; it silently stays at
-  Proxmox's own 512M default otherwise. Match it to `--memory` unless
-  you deliberately want otherwise.
-
-First boot runs `boot.postBootCommands` (registers the Nix store DB and
-system profile) — there's no separate activation step to run yourself.
-`scripts/create-proxmox-resource.sh --type lxc --host <name>` automates all
-of this (build, host-key handling, upload, `pct create` with the flags
-above) — see its `--help`.
-
-Host keys still need pre-seeding the same way as any other host — the
-sops-nix activation-vs-first-boot race is identical regardless of how the
-image reaches the machine. Unlike the ISO/PXE installer (where
-`modules/installer/host-keys.nix` bakes *every* `host-keys/` entry into
-`/etc/host-keys/` for `auto-install.sh` to pick from and copy at install
-time — see "Host keys" below), an `lxc-*` tarball has no install step to
-copy anything during, so `modules/platforms/lxc.nix` bakes this *one*
-target's key straight into `/etc/ssh/ssh_host_ed25519_key(.pub)` directly,
-keyed by its own exact flake target name (`config.environment.etc` can't
-be read back from within a module still contributing to it, so this comes
-in via `specialArgs.flakeTarget`, set by `flake.nix`'s `mkTarget`):
-
-```sh
-NIXOS_HOST_KEYS_DIR="$(pwd)/host-keys" \
-  nix build .#nixosConfigurations.lxc-nix-cache.config.system.build.tarball --impure
-```
-
-Confirmed the hard way: without this, the tarball's own built-in system
-just generates a fresh host key at first boot like any host would, which
-can never match whatever `.sops.yaml` actually trusts for that target —
-`sops-install-secrets` fails with `Error getting data key: 0 successful
-groups required, got 0`, and *every* secret (including this host's own
-login) permanently fails to decrypt, silently — no error in the boot log
-at all, since the activation step that would install secrets only runs on
-a from-scratch first activation and skips silently once `/run/current-system`
-already exists. `scripts/create-proxmox-resource.sh` always builds with
-`NIXOS_HOST_KEYS_DIR` set for this reason.
+Host keys still need pre-seeding the same way as any other host (see "Host
+keys" below) — the sops-nix activation-vs-first-boot race is identical
+regardless of how the image reaches the machine. `NIXOS_HOST_KEYS_DIR=...
+nix build ... --impure` bakes the matching key into the tarball the same way
+it does for the ISO/PXE installer images.

 ## Layout

@@ -114,40 +53,32 @@ already exists. `scripts/create-proxmox-resource.sh` always builds with
  `installation-cd-minimal.nix` module plus `common.nix`. Also used, paired
  with `netboot-minimal.nix`, to build the PXE netboot variant (see
  `docs/pxe-boot.md`).
+- `modules/installer/proxmox-lxc.nix` — Proxmox LXC-specific: disables
+  bootloader options (containers don't need one) plus `common.nix`.
 - `modules/installer/host-keys.nix` — optionally bakes pre-generated SSH
  host keys into the image; see "Host keys" below.
- `scripts/sync-host-keys.sh` — admin-workstation tool that generates,
-  registers, and (via `--remove`/`--regenerate-all-keys`) retires host
-  keys; see "Creating a New Machine" below.
- `scripts/prepare-host-key.sh` — narrower predecessor: generates a single
-  key by an arbitrary name without touching `.sops.yaml`. Still useful for
-  pre-generating a key *before* its flake target exists (`sync-host-keys.sh`
-  can only act on targets `nixosConfigurations` already has); otherwise
-  `sync-host-keys.sh` does the same thing and more.
+- `scripts/prepare-host-key.sh` — admin-workstation pre-flight tool, see
+  "Creating a New Machine" below.

 Flake outputs:

 ```nix
-nixosConfigurations.installer   # ISO/netboot installer image
+nixosConfigurations.installer     # ISO/netboot installer image
+nixosConfigurations.proxmox-lxc   # Proxmox LXC-based installer image

 packages.x86_64-linux.iso   # installer ISO/netboot image
+packages.x86_64-linux.lxc   # Proxmox LXC installer tarball
 packages.x86_64-linux.pxe   # netboot-ipxe + netboot-initrd + netboot-kernel, bundled
+packages.x86_64-linux.all   # all three of the above, bundled
 ```

 ```sh
 nix build .#iso
+nix build .#lxc
 nix build .#pxe
+nix build .#all
 ```

-There's no `nixosConfigurations.proxmox-lxc` (installer-boots-as-an-LXC-
-container) or `packages.x86_64-linux.lxc`/`.all` anymore. Both existed only
-to let the installer itself run as an LXC container so you could
-`nixos-install` some *other* host from within it — but LXC targets are
-excluded from the install menu (same bind-mount problem as any LXC
-`nixos-install`), and now have their own direct tarball path anyway (see
-"LXC hosts" above), which left the installer's own LXC form with no real
-use case.
-
 The `pxe` variant is also built automatically as part of the `pxe-boot` host
 itself (`modules/pxe-boot/stage-installer-artifacts.nix`) and served over
 iPXE — see `docs/pxe-boot.md`.
@@ -192,24 +123,10 @@ next, where you can `scp` a key in after boot, same as before this migration.
 ## Storage

 Disk partitioning is handled by Disko — the installer has no hardcoded
-`parted`/`mkfs`/`mkswap`/`mount` commands, and `auto-install.sh` runs
-`disko --mode destroy,format,mount` unconditionally, no branching on whether
-the target has a Disko config. Every host reachable through this menu has
-one:
-
- `proxmox-*` (`modules/disko/proxmox.nix`): a real GPT partition table
-  (ESP + swap + root) on `/dev/sda`.
- `linode-*` (`modules/disko/linode.nix`): Linode provisions and sizes
-  `/dev/sda`/`/dev/sdb` itself as whole, unpartitioned block devices before
-  the OS ever boots, so this declares them with `destroy = false` (skips
-  disko's wipe stage for these disks entirely — see the option's own docs)
-  and a bare `filesystem`/`swap` content type with no partition table, and
-  the format step it does run only calls `mkfs`/`mkswap` if `blkid` shows
-  the device isn't already formatted — a re-run against an
-  already-provisioned Linode disk is a no-op, not a wipe.
-
-`lxc-*` is the only category without one — it's excluded from this menu
-entirely (see "LXC hosts" above), so it never reaches this code path.
+`parted`/`mkfs`/`mkswap`/`mount` commands. Each host defines its own layout
+via `disko.devices`; a host without one is installed in place via bind-mount
+(this is how every LXC container target works, since they have no raw block
+device to partition).

 ## Installer process

@@ -218,7 +135,7 @@ entirely (see "LXC hosts" above), so it never reaches this code path.
 1. Queries `nixosConfigurations` from this flake over the network (`git+https://<lanDomain>/beatzaplenty/nixos.git`) — this happens at *install* time, not build time, so a generic installer image always sees whatever hosts are currently committed, without needing a rebuild.
 2. Presents them as a menu; confirms the choice.
 3. Skips the `nix-cache` substituter when installing a `nix-cache` host itself (consistent with that host's own runtime config).
-4. Runs `disko --mode destroy,format,mount` (see "Storage" above — every host reachable through this menu has a Disko config, so this is unconditional).
+4. Runs `disko --mode destroy,format,mount` if the target has a Disko config, otherwise bind-mounts `/` onto `/mnt`.
 5. Installs the target's SSH host key from `/etc/host-keys` or `/root/host-keys` (see "Host keys" above).
 6. Runs `nixos-install --flake <url>#<choice> --no-root-password`.
 7. Cleans up and reboots.
@@ -230,28 +147,24 @@ host consumes any sops-nix secret — as of this writing, that's every host
 (`modules/common/configuration.nix` puts the root/nixos password hash and the
 GitHub token behind sops-nix for all of them).

-1. **Add the flake target** — `hosts/<name>/host.nix` plus the matching
-   `mkTarget { ... }` entry in `flake.nix`'s `generatedTargets` (see
-   "Composition pattern" in `CLAUDE.md`). No secrets involved yet, so this
-   is safe to commit on its own if you want a clean history.
-
-2. **On your admin workstation, generate and register its host key:**
+1. **On your admin workstation**, decide the new machine's flake target name
+   (`<platform>-<buildtype>`, e.g. `proxmox-server`) and generate + register
+   its host key:

   ```sh
-   ./scripts/sync-host-keys.sh <flake-target>
+   ./scripts/prepare-host-key.sh <hostname>
   ```

-   This generates `host-keys/<flake-target>_ssh_host_ed25519_key(.pub)`,
-   adds it as a new `.sops.yaml` anchor, works out which `secrets/*.yaml`
-   files this specific host actually references (from its own
-   `config.sops.secrets`, not guessed), adds it to each one's
-   `key_groups`, and re-encrypts them with `sops updatekeys` — no manual
-   YAML editing. Safe to re-run; it only fills in what's missing.
+   This generates `host-keys/<hostname>_ssh_host_ed25519_key(.pub)` and
+   prints the `.sops.yaml` snippet to add, which secrets files to
+   re-encrypt it into, and the next steps below.

-   Doing this for every host that needs one at once — after adding several
-   new targets, or just to catch up any that were missed — is
-   `./scripts/sync-host-keys.sh --all`. See `scripts/sync-host-keys.sh --help`
-   for its other modes (`--remove`, `--regenerate-all-keys`).
+2. **Edit `.sops.yaml`** with the printed snippet, then re-encrypt every
+   secrets file you added the new host to:
+
+   ```sh
+   nix-shell -p sops --run 'sops updatekeys secrets/common.yaml'
+   ```

 3. **Commit and push.** The flake build the installer uses has to see the
   new recipient before you install, or decryption fails on first boot
@@ -11,38 +11,19 @@ This repository configures `nix-cache` as a **binary cache server** and a **remo
 - Client hosts import `modules/nix-cache/client.nix` and, when remote building is enabled, `modules/nix-cache/remote-builder-client.nix`.
 - The `nix-cache` host imports `modules/nix-cache/server.nix`.

-## Binary cache signing key
-
-`modules/nix-cache/client.nix` hardcodes every client's trust in one
-specific public key (`cache.local-1:usoWYanY3Kpq2+kDIS2nhWoLZiRxanmdysdzqCFBHW4=`).
-That means whichever host is currently playing the `nix-cache` role has to
-use that *exact* keypair — not a freshly generated one — or no client will
-accept substitutes from it (they'd just silently fall back to building
-from source). So unlike most per-host secrets, this one can't be
-self-generated on first boot; it's managed via sops-nix like every other
-secret in this repo, sourced from `secrets/nix-cache.yaml`'s
-`cache-priv-key` entry (`modules/nix-cache/server.nix`).
-
-**Adding or rotating the value:**
+## Binary cache signing keys (on nix-cache)

 ```bash
-nix-shell -p sops --run 'sops secrets/nix-cache.yaml'
+sudo install -d -m 0700 /etc/nix
+sudo nix-store --generate-binary-cache-key nix-cache-1   /etc/nix/cache-priv.pem   /etc/nix/cache-pub.pem
+sudo chmod 0600 /etc/nix/cache-priv.pem
+sudo chmod 0644 /etc/nix/cache-pub.pem
+cat /etc/nix/cache-pub.pem
 ```

-Add (or replace) a `cache-priv-key` entry with the private key file's exact
-contents. If you don't have it yet, generate a keypair once:
-
-```bash
-nix-store --generate-binary-cache-key nix-cache-1 cache-priv.pem cache-pub.pem
-```
-
-— paste `cache-priv.pem`'s contents into the `cache-priv-key` entry above,
-delete both local files afterward, and update
-`trusted-public-keys` in `modules/nix-cache/client.nix` (and every already-built
-client) to match `cache-pub.pem` if this is a genuine rotation rather than
-a first-time bootstrap. Any `nixos-configurations.*-nix-cache` host picks
-the new key up automatically on next activation — no more manual
-`/etc/nix/cache-priv.pem` install step.
+Do not commit private keys.
+Do not commit new password hashes or live credentials. Existing committed hashes
+should be rotated and moved to host-local secret management.

 ## Remote builder SSH keys

@@ -59,15 +40,6 @@ On `nix-cache`, install the matching public key used by `nixremote` authorized k
 The committed `nixremote` authorized keys are public SSH keys only. Keep the
 matching private keys on client hosts and out of the repository.

-nix-cache's own SSH *host* key is trusted declaratively via
-`programs.ssh.knownHosts` in `modules/nix-cache/remote-builder-client.nix`,
-sourced from `vars.nixCacheHostKey` (`variables.nix`) — every client rebuild
-picks it up automatically, so distributed builds don't fail with "Host key
-verification failed" on a client that has never manually SSH'd to nix-cache
-before. If nix-cache's host key is ever rotated or the host rebuilt from
-scratch, update `vars.nixCacheHostKey` to match its new
-`/etc/ssh/ssh_host_ed25519_key.pub`.
-
 ## Manual verification

 After deployment:
@@ -7,12 +7,6 @@ config (`modules/disko/proxmox.nix`) already used to format a real disk on
 install, so there's nothing host-specific to write; it's available for every
 `proxmox-*` target automatically.

-`scripts/create-proxmox-resource.sh --type vm --host <name>` automates the
-whole walkthrough below (and the equivalent LXC one) end to end, including
-host-key handling and upload — see its `--help`. The steps here are what it
-runs under the hood, useful for doing any of it by hand or understanding
-what it does before you trust it against real infrastructure.
-
 ## Building

 ```sh
@@ -49,10 +43,9 @@ sudo ./result \
  --build-memory 2048
 ```

-Generate the key first with `scripts/sync-host-keys.sh <hostname>`, same
-as any other host — see `docs/auto-installer.md` for the full walkthrough
-(it registers the new key in `.sops.yaml` and re-encrypts the affected
-`secrets/*.yaml` files too, no manual editing needed).
+Generate the key first with `scripts/prepare-host-key.sh <hostname>`, same
+as any other host — see `docs/auto-installer.md` for the full sops.yaml
+registration walkthrough.

 ## Deploying to Proxmox

@@ -1,13 +1,5 @@
 # Spec: Refactor Flake Targets into Platform × Build-Type Matrix

-**Status: implemented.** `flake.nix`'s `generatedTargets`/`mkTarget` and
-`modules/platforms/*`/`modules/build-types/*` are the result of this spec —
-kept here for historical rationale only (referenced from `CLAUDE.md`'s
-"Composition pattern" section), not as an active or open plan. The "Open
-Questions" below were resolved during implementation; don't treat them as
-outstanding. A `tailscale-exit-node` build type was added later, beyond this
-spec's original scope.
-
 ## Context

 The flake at `~/nixos` currently defines these output targets (flat, ad-hoc naming):
@@ -33,9 +33,6 @@
      # nix-cache itself consumes the nix-cache substituter and remote
      # builder.
      mkTarget = { platform, buildType, hostPath, homeFile ? ./modules/common/home.nix }:
-        let
-          flakeTarget = "${platform}-${buildType}";
-        in
        nixpkgs.lib.nixosSystem {
          inherit system;
          modules = [
@@ -45,7 +42,7 @@
            ./modules/platforms/${platform}.nix
            ./modules/build-types/${buildType}.nix
            hostPath
-            { environment.etc."flake-target".text = flakeTarget; }
+            { environment.etc."flake-target".text = "${platform}-${buildType}"; }
            home-manager.nixosModules.home-manager
            {
              home-manager = {
@@ -59,13 +56,7 @@
            ./modules/nix-cache/client.nix
            ./modules/nix-cache/remote-builder-client.nix
          ];
-          # flakeTarget is passed via specialArgs (not read back from
-          # config.environment.etc."flake-target" above) specifically so
-          # modules/platforms/lxc.nix can use it to select its own host key
-          # file without a same-option circular dependency (a module
-          # contributing to environment.etc can't read the merged
-          # environment.etc it's itself contributing to).
-          specialArgs = { inherit inputs vars netbootSystem flakeTarget; };
+          specialArgs = { inherit inputs vars netbootSystem; };
        };

      # Generated platform x build-type matrix. pxe-boot has no linode
@@ -94,10 +85,6 @@

        proxmox-pxe-boot = mkTarget { platform = "proxmox"; buildType = "pxe-boot"; hostPath = ./hosts/pxe-boot/host.nix; };
        lxc-pxe-boot = mkTarget { platform = "lxc"; buildType = "pxe-boot"; hostPath = ./hosts/pxe-boot/host.nix; };
-
-        linode-tailscale-exit-node = mkTarget { platform = "linode"; buildType = "tailscale-exit-node"; hostPath = ./hosts/tailscale-exit-node/host.nix; };
-        proxmox-tailscale-exit-node = mkTarget { platform = "proxmox"; buildType = "tailscale-exit-node"; hostPath = ./hosts/tailscale-exit-node/host.nix; };
-        lxc-tailscale-exit-node = mkTarget { platform = "lxc"; buildType = "tailscale-exit-node"; hostPath = ./hosts/tailscale-exit-node/host.nix; };
      };

      # Auto-install environments (migrated from the former nix-auto-installer
@@ -113,6 +100,12 @@
          modules = [ ./modules/installer/iso.nix ];
          specialArgs = { inherit vars; };
        };
+
+        proxmox-lxc = nixpkgs.lib.nixosSystem {
+          inherit system;
+          modules = [ ./modules/installer/proxmox-lxc.nix ];
+          specialArgs = { inherit vars; };
+        };
      };

      # Same installer environment, built as netboot (kernel + initrd +
@@ -135,22 +128,24 @@

      nixosConfigurations = generatedTargets // installerTargets;

-      # Buildable auto-installer artifacts (`nix build .#<name>`). No `lxc`
-      # variant (installer-boots-as-an-LXC-container) or `all` bundle
-      # anymore — lxc-* and proxmox-* hosts deploy via their own tarball/
-      # disk-image outputs instead (see docs/auto-installer.md and
-      # docs/proxmox-images.md), which left the installer's own LXC form
-      # with no real use case: it's excluded from the install menu (same
-      # bind-mount problem as any LXC nixos-install target) and nothing
-      # else needed booting the installer itself as a container.
-      packages.${system} = {
+      # Buildable auto-installer artifacts (`nix build .#<name>`), migrated
+      # unchanged from nix-auto-installer's interface.
+      packages.${system} = rec {
        iso = installerTargets.installer.config.system.build.isoImage;

+        lxc = installerTargets.proxmox-lxc.config.system.build.tarball;
+
        pxe = pkgs.linkFarm "pxe" [
          { name = "netboot.ipxe"; path = netbootSystem.config.system.build.netbootIpxeScript; }
          { name = "initrd"; path = netbootSystem.config.system.build.netbootRamdisk; }
          { name = "kernel"; path = netbootSystem.config.system.build.kernel; }
        ];
+
+        all = pkgs.linkFarm "all" [
+          { name = "iso"; path = iso; }
+          { name = "lxc"; path = lxc; }
+          { name = "pxe"; path = pxe; }
+        ];
      };
    };
 }
@@ -31,7 +31,7 @@
        [Desktop Entry]
        Type=Application
        Name=Proxmox (Chromium)
-        Exec=chromium --app=https://pve.${vars.homeDomain}:${toString vars.ports.pveWeb} --window-size=1920,1080 --window-position=0,0
+        Exec=chromium --app=https://pve.${vars.homeDomain}:${toString vars.pveWebPort} --window-size=1920,1080 --window-position=0,0
        Icon=${config.home.homeDirectory}/.local/share/icons/proxmox.png
        Terminal=false
        Categories=Hypervisor;
@@ -41,7 +41,7 @@
        [Desktop Entry]
        Type=Application
        Name=Proxmox Backup Server (Chromium)
-        Exec=chromium --app=https://${vars.pbsIp}:${toString vars.ports.pbsWeb} --window-size=1920,1080 --window-position=0,0
+        Exec=chromium --app=https://${vars.pbsIp}:${toString vars.pbsWebPort} --window-size=1920,1080 --window-position=0,0
        Icon=${config.home.homeDirectory}/.local/share/icons/proxmox.png
        Terminal=false
        Categories=backup;
@@ -51,7 +51,7 @@
        [Desktop Entry]
        Type=Application
        Name=Proxmox (Firefox)
-        Exec=firefox --new-instance https://pve.${vars.homeDomain}:${toString vars.ports.pveWeb} --profile ProxmoxWebApp --window-size=1920,1080 --class ProxmoxWebApp
+        Exec=firefox --new-instance https://pve.${vars.homeDomain}:${toString vars.pveWebPort} --profile ProxmoxWebApp --window-size=1920,1080 --class ProxmoxWebApp
        Icon=${config.home.homeDirectory}/.local/share/icons/proxmox.png
        Terminal=false
        Categories=Hypervisor;
@@ -61,7 +61,7 @@
        [Desktop Entry]
        Type=Application
        Name=Proxmox Backup Server (Firefox)
-        Exec=firefox --new-window https://${vars.pbsIp}:${toString vars.ports.pbsWeb} --profile PbsWebApp --window-size=1920,1080 --class PbsWebApp
+        Exec=firefox --new-window https://${vars.pbsIp}:${toString vars.pbsWebPort} --profile PbsWebApp --window-size=1920,1080 --class PbsWebApp
        Icon=${config.home.homeDirectory}/.local/share/icons/proxmox.png
        Terminal=false
        Categories=backup;
@@ -14,7 +14,7 @@
  services.beszel.agent.environment = {
    #DOCKER_HOST = "tcp://docker-socket-proxy:2375";
    KEY = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFPR9kwtC4TAeTRu46A7+opZsYpxqkRJ+x/ZyB2GWCeG";
-    EXTRA_FILESYSTEMS = "${vars.storageRoot}/${vars.nfsShares.dockerVolumes.subpath}";
+    EXTRA_FILESYSTEMS = "${vars.storageRoot}/docker/volumes";
    LOG_LEVEL = "debug";
  };

@@ -1,12 +0,0 @@
-_:
-
-{
-  networking.hostName = "exit-node";
-
-  # No networking.hostId: only ZFS-touching hosts (server, docker) need one
-  # for pool-import safety, and this host does neither.
-
-  # A genuinely new host (not a pre-refactor carry-over), so it tracks the
-  # flake's current nixpkgs release rather than being pinned to an older one.
-  system.stateVersion = "26.05";
-}
@@ -4,15 +4,6 @@
  services.beszel.agent.enable = true;
  services.beszel.agent.environment = {
    #DOCKER_HOST = "tcp://docker-socket-proxy:2375";
-    HUB_URL = "http://${vars.dockerHost}.${vars.homeDomain}:${toString vars.ports.beszelHub}";
+    HUB_URL = "http://${vars.dockerHost}.${vars.homeDomain}:${toString vars.beszelHubPort}";
  };
-
-  # The upstream module runs beszel-agent under DynamicUser with
-  # ProtectSystem = "strict" and no StateDirectory, so /var/lib/beszel-agent
-  # (where the agent persists its hub-pairing fingerprint, per
-  # https://github.com/henrygd/beszel/discussions/1542) isn't writable --
-  # every restart silently fails to save it and regenerates a fresh one in
-  # memory, permanently desyncing from whatever the hub has on record after
-  # the very first successful pairing. Give it real persistent storage.
-  systemd.services.beszel-agent.serviceConfig.StateDirectory = "beszel-agent";
 }
@@ -28,18 +28,13 @@
  boot.supportedFilesystems = [ "nfs" ];

  systemd.tmpfiles.rules = [
-    "L+ /home/${vars.primaryUser}/docker - - - - ${vars.nfsShares.dockerConfig.mountpoint}"
-    "d /mnt/docker 0755 ${vars.primaryUser} users -"
-    "d ${vars.nfsShares.raspiVolumes.mountpoint} 0755 ${vars.primaryUser} users -"
+    "L+ /home/nixos/docker - - - - /mnt/docker/config"
+    "d /mnt/docker 0755 nixos users -"
+    "d /mnt/raspi-backup 0755 nixos users -"
  ];

-  users.users.${vars.primaryUser}.extraGroups = [ "docker" ];
+  users.users.nixos.extraGroups = [ "docker" ];
  services.openssh.settings.PermitRootLogin = "yes";

-  networking.firewall.allowedTCPPorts = [
-    vars.ports.dockerHttp
-    vars.ports.dockerExtra
-    vars.ports.dockerHttps
-    vars.ports.beszelHub
-  ];
+  networking.firewall.allowedTCPPorts = [ 80 8080 443 vars.beszelHubPort ];
 }
@@ -1,4 +1,4 @@
-{ config, pkgs, lib, inputs, vars, ... }:
+{ config, pkgs, lib, inputs, ... }:

 {
  environment.systemPackages = with pkgs; [
@@ -65,7 +65,7 @@
  # The networkmanager group only exists when NM is actually enabled — the
  # lxc platform module force-disables it, so don't add the user to a group
  # that won't exist there.
-  users.users.${vars.primaryUser}.extraGroups = lib.mkIf config.networking.networkmanager.enable [ "networkmanager" ];
+  users.users.nixos.extraGroups = lib.mkIf config.networking.networkmanager.enable [ "networkmanager" ];

  programs.firefox.enable = true;

@@ -1,4 +1,4 @@
-{ lib, pkgs, config, vars, ... }:
+{ lib, pkgs, config, ... }:

 {
  networking.networkmanager.enable = true;
@@ -6,7 +6,7 @@
  # The networkmanager group only exists when NM is actually enabled — the
  # lxc platform module force-disables it, so don't add the user to a group
  # that won't exist there.
-  users.users.${vars.primaryUser}.extraGroups = lib.mkIf config.networking.networkmanager.enable [ "networkmanager" ];
+  users.users.nixos.extraGroups = lib.mkIf config.networking.networkmanager.enable [ "networkmanager" ];

  environment.systemPackages = with pkgs; [
    inetutils
@@ -155,6 +155,6 @@ in
    };
  };

-  networking.firewall.allowedTCPPorts = [ vars.ports.pxeBootHttp ];
-  networking.firewall.allowedUDPPorts = [ vars.ports.pxeBootTftp ];
+  networking.firewall.allowedTCPPorts = [ 80 ];
+  networking.firewall.allowedUDPPorts = [ 69 ];
 }
@@ -16,13 +16,13 @@
  services.nfs.server = {
    enable = true;
    exports = ''
-      ${vars.storageRoot}/${vars.nfsShares.dockerConfig.subpath} ${vars.lanCidr}(rw,sync,no_subtree_check,no_root_squash)
-      ${vars.storageRoot}/${vars.nfsShares.dockerVolumes.subpath} ${vars.lanCidr}(rw,sync,no_subtree_check,no_root_squash)
-      ${vars.storageRoot}/${vars.nfsShares.dockerDatabases.subpath} ${vars.lanCidr}(rw,sync,no_subtree_check,no_root_squash)
-      ${vars.storageRoot}/${vars.nfsShares.nextcloudData.subpath} ${vars.lanCidr}(rw,sync,no_subtree_check,no_root_squash)
-      ${vars.storageRoot}/${vars.nfsShares.raspiVolumes.subpath} ${vars.lanCidr}(rw,sync,no_subtree_check,no_root_squash)
+      ${vars.storageRoot}/docker/config ${vars.lanCidr}(rw,sync,no_subtree_check,no_root_squash)
+      ${vars.storageRoot}/docker/volumes ${vars.lanCidr}(rw,sync,no_subtree_check,no_root_squash)
+      ${vars.storageRoot}/docker/databases ${vars.lanCidr}(rw,sync,no_subtree_check,no_root_squash)
+      ${vars.storageRoot}/docker/nextcloud-data ${vars.lanCidr}(rw,sync,no_subtree_check,no_root_squash)
+      ${vars.storageRoot}/raspi/volumes ${vars.lanCidr}(rw,sync,no_subtree_check,no_root_squash)
    '';
  };

-  networking.firewall.allowedTCPPorts = [ vars.ports.nfsRpcbind vars.ports.nfsd ];
+  networking.firewall.allowedTCPPorts = [ 111 2049 ];
 }
@@ -1,21 +0,0 @@
-{ ... }:
-
-{
-  imports = [
-    ../tailscale/exit-node.nix
-  ];
-
-  # "server", not "both": this build type only ever advertises itself as an
-  # exit node (see ../tailscale/exit-node.nix) -- it doesn't advertise LAN
-  # subnet routes, so it doesn't need the "client"-side loose reverse-path
-  # filtering that "both" would also turn on. Deliberately left unbundled
-  # from LAN-subnet-route advertisement so this build type stays valid on
-  # every platform, including linode (a remote VPS with no network path to
-  # the home LAN at all).
-  services.tailscale.useRoutingFeatures = "server";
-
-  # Forwarded exit-node traffic arrives on tailscale0 already
-  # tailscale-authenticated -- the firewall's normal per-port allow-list
-  # would otherwise drop it. Standard NixOS/Tailscale exit-node guidance.
-  networking.firewall.trustedInterfaces = [ "tailscale0" ];
-}
@@ -17,26 +17,6 @@ let
      --refresh \
      --flake git+https://${vars.lanDomain}/beatzaplenty/nixos.git#$(cat /etc/flake-target)
  '';
-
-  # lxc-* hosts pre-seed their SSH host key at build time (see
-  # modules/platforms/lxc.nix) so sops-nix's .sops.yaml recipient matches on
-  # first boot -- without it, secrets permanently fail to decrypt (see that
-  # file's comment for the confirmed failure). That requires --impure plus
-  # NIXOS_HOST_KEYS_DIR pointing at the repo's host-keys/ dir, same pattern
-  # docs/auto-installer.md uses for the installer ISO. A function, not a
-  # shellAlias, since the target name has to interpolate into the middle of
-  # the flake attribute path, not just append after it. Must be run from the
-  # repo root, same as every other host-keys/ command in this repo.
-  buildImageFn = ''
-    buildImage() {
-      if [ -z "$1" ]; then
-        echo "usage: buildImage <flake-target>  (e.g. lxc-docker)" >&2
-        return 1
-      fi
-      NIXOS_HOST_KEYS_DIR="$(pwd)/host-keys" nix build --impure \
-        ".#nixosConfigurations.$1.config.system.build.tarball"
-    }
-  '';
 in
 {
  programs.bash = {
@@ -45,6 +25,5 @@ in
      "Switch-nix" = mySwitchCmd;
      "Test-nix" = myTestCmd;
    };
-    initExtra = buildImageFn;
  };
 }
@@ -1,35 +0,0 @@
-_:
-
-{
-  # Linode provisions and sizes these disks itself (via the Linode
-  # dashboard/API) before the OS ever boots, and presents them as whole,
-  # unpartitioned block devices — /dev/sda is the root filesystem directly,
-  # /dev/sdb is swap directly, no partition table on either. Nothing here
-  # should ever repartition or resize them:
-  #   - `destroy = false` skips each disk entirely during disko's destroy
-  #     stage (see disko's disk.destroy option) — no wipefs, ever.
-  #   - the filesystem content type's own create step only runs mkfs if the
-  #     device isn't already formatted (checked via `blkid`), so re-running
-  #     this against an already-provisioned Linode disk is a no-op.
-  disko.devices.disk = {
-    main = {
-      device = "/dev/sda";
-      destroy = false;
-
-      content = {
-        type = "filesystem";
-        format = "ext4";
-        mountpoint = "/";
-      };
-    };
-
-    swap = {
-      device = "/dev/sdb";
-      destroy = false;
-
-      content = {
-        type = "swap";
-      };
-    };
-  };
-}
@@ -1,4 +1,4 @@
-{ config, vars, ... }:
+{ config, ... }:

 {
  disko.devices = {
@@ -13,7 +13,7 @@
      # whatever's left after ESP + swap within it); imageName keeps each
      # host's image distinctly named instead of every proxmox-* host
      # producing an identical "main.raw".
-      imageSize = vars.proxmoxImageSize;
+      imageSize = "20G";
      imageName = config.networking.hostName;

      content = {
@@ -2,8 +2,8 @@

 {
  fileSystems = {
-    ${vars.nfsShares.dockerConfig.mountpoint} = {
-      device = "${vars.nfsServerHost}:${vars.storageRoot}/${vars.nfsShares.dockerConfig.subpath}";
+    "/mnt/docker/config" = {
+      device = "${vars.nfsServerHost}:${vars.storageRoot}/docker/config";
      fsType = "nfs";

      options = [
@@ -14,8 +14,8 @@
      ];
    };

-    ${vars.nfsShares.dockerDatabases.mountpoint} = {
-      device = "${vars.nfsServerHost}:${vars.storageRoot}/${vars.nfsShares.dockerDatabases.subpath}";
+    "/mnt/docker/databases" = {
+      device = "${vars.nfsServerHost}:${vars.storageRoot}/docker/databases";
      fsType = "nfs";

      options = [
@@ -26,8 +26,8 @@
      ];
    };

-    ${vars.nfsShares.dockerVolumes.mountpoint} = {
-      device = "${vars.nfsServerHost}:${vars.storageRoot}/${vars.nfsShares.dockerVolumes.subpath}";
+    "/mnt/docker/volumes" = {
+      device = "${vars.nfsServerHost}:${vars.storageRoot}/docker/volumes";
      fsType = "nfs";

      options = [
@@ -38,8 +38,8 @@
      ];
    };

-    ${vars.nfsShares.nextcloudData.mountpoint} = {
-      device = "${vars.nfsServerHost}:${vars.storageRoot}/${vars.nfsShares.nextcloudData.subpath}";
+    "/mnt/nextcloud-data" = {
+      device = "${vars.nfsServerHost}:${vars.storageRoot}/docker/nextcloud-data";
      fsType = "nfs";

      options = [
@@ -50,8 +50,8 @@
      ];
    };

-    ${vars.nfsShares.raspiVolumes.mountpoint} = {
-      device = "${vars.nfsServerHost}:${vars.storageRoot}/${vars.nfsShares.raspiVolumes.subpath}";
+    "/mnt/raspi-backup" = {
+      device = "${vars.nfsServerHost}:${vars.storageRoot}/raspi/volumes";
      fsType = "nfs";

      options = [
@@ -33,11 +33,14 @@
    };
  };

-  # fileSystems."/" and swapDevices are now owned by disko
-  # (../disko/linode.nix, imported from ../platforms/linode.nix) — same
-  # /dev/sda root + /dev/sdb swap layout, declared there instead so disko's
-  # (idempotent, non-destructive — see that file) format/mount scripts stay
-  # in sync with what NixOS actually mounts.
+  fileSystems."/" =
+    {
+      device = "/dev/sda";
+      fsType = "ext4";
+    };
+
+  swapDevices =
+    [{ device = "/dev/sdb"; }];

  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
 }
@@ -57,23 +57,25 @@

        echo "Fetching available NixOS hosts from flake..."
        # Two categories deliberately excluded from the menu:
-        #   lxc-*     — these build a config.system.build.tarball meant for
-        #               `pct restore` on Proxmox directly, not an install.
-        #               Running nixos-install against one here would
-        #               bind-mount / onto /mnt and then refuse to touch the
-        #               filesystem it's currently running on — see
-        #               docs/auto-installer.md.
-        #   installer — this *is* the installer image's own flake target,
-        #               not a deployable host; "installing" it means
-        #               nixos-install-ing a copy of the installer into
-        #               itself.
+        #   lxc-*                 — these build a config.system.build.tarball
+        #                           meant for `pct restore` on Proxmox
+        #                           directly, not an install. Running
+        #                           nixos-install against one here would
+        #                           bind-mount / onto /mnt and then refuse to
+        #                           touch the filesystem it's currently
+        #                           running on — see docs/auto-installer.md.
+        #   installer/proxmox-lxc — these *are* the installer image's own
+        #                           flake targets, not deployable hosts;
+        #                           "installing" one means nixos-install-ing
+        #                           a copy of the installer into itself.
        mapfile -t options < <(
          nix eval --json --no-use-registries --no-accept-flake-config --extra-experimental-features "flakes nix-command" \
            "''${FLAKE_BASE_URL}#nixosConfigurations" \
            --apply builtins.attrNames \
          | jq -r '.[]
              | select(startswith("lxc-") | not)
-              | select(. != "installer")'
+              | select(. != "installer")
+              | select(. != "proxmox-lxc")'
        )

        if [[ ''${#options[@]} -eq 0 ]]; then
@@ -119,12 +121,21 @@
            nix_extra_opts+=(--option substituters "https://cache.nixos.org/")
        fi

-        # Every host reachable through this menu has a Disko config (lxc-*
-        # is filtered out above, and is the only category that doesn't —
-        # see docs/auto-installer.md), so this can run unconditionally: no
-        # need to probe the flake first and branch on whether Disko applies.
-        disko --mode destroy,format,mount \
-            --flake "''${FLAKE_BASE_URL}#''${choice}" "''${nix_extra_opts[@]}" --yes-wipe-all-disks
+        if nix eval --refresh --json  --extra-experimental-features "flakes nix-command" "''${nix_extra_opts[@]}" "''${FLAKE_BASE_URL}#nixosConfigurations.''${choice}.config.disko.devices.disk.main.device" >/dev/null 2>&1; then
+            disko --mode destroy,format,mount \
+                --flake "''${FLAKE_BASE_URL}#''${choice}" "''${nix_extra_opts[@]}" --yes-wipe-all-disks
+        else
+            # No raw disk to partition — true for every LXC container, which has
+            # no block device visible from inside it, only its already-mounted
+            # root filesystem. nixos-install defaults to installing into /mnt; if
+            # nothing points /mnt at the real root, the new system gets built and
+            # written to a disconnected empty directory, never actually becomes
+            # bootable, and the container silently keeps running this installer
+            # environment forever. Bind-mount / onto /mnt so the install actually
+            # lands on the filesystem this container boots from.
+            echo "Selected host has no Disko configuration — installing in place via bind mount."
+            mount --bind / /mnt
+        fi

        # sops-nix derives this host's decryption key from its own SSH host key
        # at *activation* time, which runs before systemd would otherwise
@@ -0,0 +1,12 @@
+{ modulesPath, ... }:
+
+{
+  imports = [
+    ./common.nix
+    (modulesPath + "/virtualisation/proxmox-lxc.nix")
+  ];
+
+  # LXC has no bootloader
+  boot.loader.grub.enable = false;
+  boot.loader.systemd-boot.enable = false;
+}
@@ -5,14 +5,6 @@
  #   sudo install -d -m 0700 /root/.ssh
  #   sudo install -m 0600 ./nixremote /root/.ssh/nixremote
  #   sudo ssh -i /root/.ssh/nixremote nixremote@nix-cache nix-store --version
-  # Trust nix-cache's SSH host key declaratively so the nix-daemon (root)
-  # can connect the first time without a manual ssh-keyscan/known_hosts
-  # step on every new client.
-  programs.ssh.knownHosts.${vars.nixCacheHost} = {
-    hostNames = [ vars.nixCacheHost ];
-    publicKey = vars.nixCacheHostKey;
-  };
-
  nix = {
    distributedBuilds = true;

@@ -1,20 +1,18 @@
 { config, pkgs, vars, ... }:

 {
-  # nix-serve's signing key has to be the *same* key on every host that
-  # ever plays the nix-cache role -- modules/nix-cache/client.nix hardcodes
-  # every client's trust in one specific public key ("cache.local-1:..."),
-  # so a freshly self-generated key here wouldn't be trusted by anyone.
-  # Managed via sops-nix like every other secret in this repo instead of
-  # the old manual `nix-store --generate-binary-cache-key` step -- see
-  # "Binary cache signing key" in docs/nix-cache.md for how to add/rotate
-  # the value in secrets/nix-cache.yaml.
-  sops.secrets."cache-priv-key".sopsFile = ../../secrets/nix-cache.yaml;
-
+  # Generate the binary cache key pair on the nix-cache host:
+  #   sudo install -d -m 0700 /etc/nix
+  #   sudo nix-store --generate-binary-cache-key nix-cache-1 \
+  #     /etc/nix/cache-priv.pem \
+  #     /etc/nix/cache-pub.pem
+  #   sudo chmod 0600 /etc/nix/cache-priv.pem
+  #   sudo chmod 0644 /etc/nix/cache-pub.pem
+  #   cat /etc/nix/cache-pub.pem
  services = {
    nix-serve = {
      enable = true;
-      secretKeyFile = config.sops.secrets."cache-priv-key".path;
+      secretKeyFile = "/etc/nix/cache-priv.pem";
    };

    nginx = {
@@ -30,7 +28,7 @@
    openssh.enable = true;
  };

-  networking.firewall.allowedTCPPorts = [ vars.ports.nixCacheHttp ];
+  networking.firewall.allowedTCPPorts = [ 80 ];

  users.groups.${vars.remoteBuilderUser} = { };

@@ -56,6 +54,6 @@
  nix.gc = {
    automatic = true;
    dates = "weekly";
-    options = "--delete-older-than ${vars.nixCacheGcMaxAge}";
+    options = "--delete-older-than 30d";
  };
 }
@@ -3,7 +3,6 @@
 {
  imports = [
    ../hardware-configuration/vm/linode.nix
-    ../disko/linode.nix
  ];

  networking = {
@@ -1,44 +1,5 @@
-{ lib, modulesPath, flakeTarget, ... }:
+{ lib, modulesPath, ... }:

-let
-  # Bakes this exact flake target's pre-generated SSH host key straight
-  # into /etc/ssh/ -- mirrors modules/installer/host-keys.nix's
-  # builtins.getEnv pattern (impure and empty under normal `nix
-  # build`/`nix eval`, so this is a no-op unless explicitly opted into
-  # with NIXOS_HOST_KEYS_DIR=... --impure), but places the key directly
-  # rather than staging it under /etc/host-keys/ for a later manual copy
-  # -- this is the whole system for a `lxc-*` host, built straight to a
-  # pct-restorable tarball with no install step, so there's no later copy
-  # step to stage for.
-  #
-  # Without this, config.system.build.tarball's built-in system just
-  # generates a fresh host key at first boot like any other host would --
-  # but sops-nix derives its decryption key from *this* file, and
-  # .sops.yaml only trusts whatever key scripts/sync-host-keys.sh already
-  # registered for this exact target name. A freshly-generated key can
-  # never match that, so every secret (including this host's own login)
-  # permanently fails to decrypt. Confirmed live: sops-install-secrets
-  # errored with "Error getting data key: 0 successful groups required,
-  # got 0" -- the container's actual host key's age fingerprint didn't
-  # match the one registered in .sops.yaml at all.
-  hostKeysDirStr = builtins.getEnv "NIXOS_HOST_KEYS_DIR";
-  hasHostKeysDir = hostKeysDirStr != "" && builtins.pathExists hostKeysDirStr;
-  hostKeysDir = /. + hostKeysDirStr;
-
-  # flakeTarget ("${platform}-${buildType}") comes in via specialArgs from
-  # flake.nix's mkTarget -- exactly the name scripts/sync-host-keys.sh
-  # registers keys under. Deliberately not read back from
-  # config.environment.etc."flake-target" (which is set to the same value)
-  # -- this module also *contributes* to environment.etc below, and a
-  # module reading the merged value of an option it's still defining is a
-  # circular dependency (confirmed: "infinite recursion encountered").
-  privKeyFile = hostKeysDir + "/${flakeTarget}_ssh_host_ed25519_key";
-  pubKeyFile = hostKeysDir + "/${flakeTarget}_ssh_host_ed25519_key.pub";
-  hasKeyForThisTarget =
-    hasHostKeysDir
-    && builtins.pathExists privKeyFile
-    && builtins.pathExists pubKeyFile;
-in
 {
  # LXC containers share the host kernel — Proxmox starts them by exec'ing
  # /sbin/init directly, no bootloader/initrd involved — and Proxmox has its
@@ -74,75 +35,4 @@ in
  # for the same reason; it just doesn't disable NetworkManager itself,
  # which modules/common/configuration.nix enables for every host.
  networking.networkmanager.enable = lib.mkForce false;
-
-  environment.etc = lib.mkIf hasKeyForThisTarget {
-    "ssh/ssh_host_ed25519_key" = {
-      source = privKeyFile;
-      mode = "0600";
-    };
-    "ssh/ssh_host_ed25519_key.pub" = {
-      source = pubKeyFile;
-      mode = "0644";
-    };
-  };
-
-  # virtualisation/proxmox-lxc.nix (imported above) registers the Nix
-  # store DB via a systemd service (register-nix-paths) -- it never runs
-  # an activation script at all. Confirmed live this means neither
-  # sops-nix's "for users" secrets (password hashes -- installed by the
-  # activation script itself, not a systemd service, since they need to
-  # exist *before* user creation) nor the user-creation step that
-  # consumes them ever run on a real lxc-* boot. Regular secrets
-  # (nix-serve's key, beszel's token, etc.) work anyway because sops-nix
-  # provides its own systemd service for those.
-  #
-  # A systemd service, not boot.postBootCommands: tried that first (it's
-  # a genuine, generally-invoked hook -- nixos/modules/system/boot/stage-2-init.sh,
-  # which becomes this container's actual /sbin/init, unconditionally
-  # runs it) but switch-to-configuration behaves differently that early in
-  # boot (raw stage-2-init.sh, before systemd itself has even started) --
-  # confirmed live it silently failed to rewrite /etc/shadow from there
-  # even in "test" mode, despite the exact same command working reliably
-  # every time when run post-boot (i.e. as a normal systemd service, which
-  # is what this is). Not fully root-caused why the early context
-  # specifically breaks it; a real systemd service sidesteps needing to.
-  #
-  # /etc/shadow already has PLACEHOLDER entries for every declared user
-  # baked in at build time (part of constructing the system closure).
-  # update-users-groups.pl deliberately never overwrites an *existing*
-  # shadow entry -- a correct safety property in general (don't clobber a
-  # real user's real password on a config rebuild) -- but on a genuine
-  # first boot that only means the real hashedPasswordFile-derived hash
-  # never gets the chance to be applied either, since the placeholder is
-  # already "seen". Safe to clear here specifically: there is no real
-  # password yet to protect on a first boot.
-  #
-  # "test" mode, not "boot": confirmed live "boot" mode aborts partway
-  # through (before rewriting /etc/shadow) on a warning that "/boot" is on
-  # a different filesystem -- a real check for a host with a bootloader to
-  # update, meaningless for a container that has none
-  # (boot.loader.{grub,systemd-boot}.enable are both false above), but it
-  # still aborts the script. "test" runs every activation step without
-  # touching boot-loader state at all.
-  #
-  # ConditionPathExists (systemd-native, not a bash-level check) means
-  # this only ever runs once, on the genuine first boot -- systemd itself
-  # skips even starting it on every later boot once the marker exists.
-  # switch-to-configuration is otherwise the operator's call per this
-  # repo's own safety rules, not something to run on every boot.
-  systemd.services.nixos-lxc-first-boot-activate = {
-    description = "Complete first-boot NixOS activation (users, secrets) for this LXC container";
-    wantedBy = [ "multi-user.target" ];
-    unitConfig.ConditionPathExists = "!/var/lib/nixos-lxc-first-boot-activated";
-    serviceConfig = {
-      Type = "oneshot";
-      RemainAfterExit = true;
-    };
-    script = ''
-      rm -f /etc/shadow
-      /run/current-system/bin/switch-to-configuration test
-      mkdir -p /var/lib
-      touch /var/lib/nixos-lxc-first-boot-activated
-    '';
-  };
 }
@@ -1,8 +1,8 @@
 { vars, ... }:

 {
-  fileSystems.${vars.raspiMountpoint} = {
-    device = "${vars.raspberryPiHost}.${vars.tailnetDomain}:${vars.raspiNfsPath}";
+  fileSystems."/mnt/raspi" = {
+    device = "raspberrypi.${vars.tailnetDomain}:/home/raspi/raspi";
    fsType = "nfs4";
    options = [
      "nofail"
@@ -1,19 +1,12 @@
-_:
+{ vars, ... }:

 {
  services.tailscale = {
    enable = true;

-    # extraSetFlags (tailscale set, via the always-on tailscaled-set
-    # service), not extraUpFlags -- extraUpFlags is only ever applied by
-    # tailscaled-autoconnect, which itself only runs when
-    # services.tailscale.authKeyFile is set (nothing in this repo sets one,
-    # so tailscale up is a manual, one-time operator step on every host that
-    # uses this service). extraSetFlags has no such gate, so
-    # --advertise-exit-node self-reapplies on every boot once the operator
-    # has authenticated the node once.
-    extraSetFlags = [
+    extraUpFlags = [
      "--advertise-exit-node"
+      "--advertise-routes=${vars.lanCidr}"
    ];
  };
 }
@@ -1,14 +1,14 @@
-{ vars, ... }:
+_:

 {
  services.logrotate = {
    enable = true;

    settings = {
-      "${vars.nfsShares.dockerVolumes.mountpoint}/traefik-data/logs/*.log" = {
+      "/mnt/docker/volumes/traefik-data/logs/*.log" = {
        daily = true;
-        size = vars.traefikLogRotate.maxSize;
-        rotate = vars.traefikLogRotate.keep;
+        size = "100M";
+        rotate = 20;
        compress = true;
        missingok = true;
        notifempty = true;
@@ -122,25 +122,13 @@ Add a pre-commit hook (or a `nix flake check` step) running `gitleaks protect --

 ## Definition of done

-**Status as of 2026-07-20:** Milestones 1–3 are done — sops-nix is fully
-wired (`.sops.yaml`, `secrets/*.yaml`, referenced via `hashedPasswordFile`/
-`*File`/`sops.secrets.*.path` throughout), and history has been scrubbed
-with `git-filter-repo` + force-push (this removed a GitHub fine-grained PAT
-that had been committed in plaintext in `flake.nix`/`common/home.nix`
-between 2025-07-16 and 2026-02-09, later migrated to sops but never scrubbed
-from history until now). **Milestone 4 is not confirmed** — whether that PAT
-(or any other historically-plaintext credential) was actually rotated, not
-just re-encrypted, isn't something this repo can attest to; that's an
-operator action against the issuing service (GitHub, etc.), not a repo
-change. Do that before considering this fully closed.
-
- [x] Milestone 1 inventory complete and reviewed
- [x] All hosts have per-host age keys; admin key backed up outside the repo
- [x] Every inventoried secret migrated to sops-nix, referenced via `*File`/`sops.secrets.*.path`, nothing plaintext in the working tree
- [x] `nixos-rebuild dry-build` and at least one real `switch` verified per host
- [x] Working-tree scanner sweep clean
- [x] History rewritten with `git-filter-repo`, force-pushed, full-history scanner sweep clean
- [ ] All other clones deleted and re-cloned from the rewritten history — every clone that existed before 2026-07-20's rewrite (any other machine, WSL instance, or CI checkout) needs this
- [ ] Every credential in the original inventory rotated (not just re-encrypted) — **the GitHub PAT found in history specifically still needs this**
- [x] Pre-commit secret scanning hook added (`.githooks/pre-commit`, `gitleaks protect --staged`)
- [x] `secrets-inventory.md` deleted from the working directory (never committed)
+- [ ] Milestone 1 inventory complete and reviewed
+- [ ] All hosts have per-host age keys; admin key backed up outside the repo
+- [ ] Every inventoried secret migrated to sops-nix, referenced via `*File`/`sops.secrets.*.path`, nothing plaintext in the working tree
+- [ ] `nixos-rebuild dry-build` and at least one real `switch` verified per host
+- [ ] Working-tree scanner sweep clean
+- [ ] History rewritten with `git-filter-repo`, force-pushed, full-history scanner sweep clean
+- [ ] All other clones deleted and re-cloned from the rewritten history
+- [ ] Every credential in the original inventory rotated (not just re-encrypted)
+- [ ] Pre-commit secret scanning hook added
+- [ ] `secrets-inventory.md` deleted from the working directory (never committed)
@@ -1,148 +0,0 @@
-#!/usr/bin/env bash
-# Backs up the local sops age key (the private key that decrypts
-# secrets/*.yaml -- normally the one trusted as &admin) to an arbitrary
-# destination path, e.g. a USB drive or other offline storage, so it can
-# later be restored and handed to rotate-admin-key.sh if this machine's
-# copy is ever lost, or to run either script from a different machine.
-#
-# Usage:
-#   scripts/backup-admin-key.sh <dest-path> [--key-file <path>] [--force] [--dry-run]
-#
-# Source key resolution matches sops/age's own default order:
-#   $SOPS_AGE_KEY (inline identity text) if set, else
-#   --key-file if given, else
-#   $SOPS_AGE_KEY_FILE if set, else
-#   ${XDG_CONFIG_HOME:-$HOME/.config}/sops/age/keys.txt
-set -euo pipefail
-
-repo_root="$(cd "$(dirname "$0")/.." && pwd)"
-sops_yaml="${repo_root}/.sops.yaml"
-
-# shellcheck source=env.sh
-source "${repo_root}/scripts/env.sh"
-
-# Pin cwd for the same reason rotate-admin-key.sh does: age/sops calls
-# below should never depend on wherever the caller's shell happened to be.
-cd "$repo_root"
-
-usage() {
-  cat <<EOF
-Usage: $0 <dest-path> [--key-file <path>] [--force] [--dry-run]
-
-  <dest-path>        Where to write the backup. Parent directories are
-                     created as needed. Written with 0600 permissions.
-  --key-file <path>  Read the key from here instead of the default
-                     sops/age resolution (\$SOPS_AGE_KEY_FILE, then
-                     \${XDG_CONFIG_HOME:-\$HOME/.config}/sops/age/keys.txt).
-                     Ignored if \$SOPS_AGE_KEY is set (that always wins,
-                     same precedence sops/age itself uses).
-  --force            Overwrite <dest-path> if it already exists.
-  --dry-run          Print what would happen; write nothing.
-EOF
-}
-
-dry_run=0
-force=0
-key_file="${SOPS_AGE_KEY_FILE:-${XDG_CONFIG_HOME:-$HOME/.config}/sops/age/keys.txt}"
-args=()
-
-while [[ $# -gt 0 ]]; do
-  case "$1" in
-    --dry-run)
-      dry_run=1
-      shift
-      ;;
-    --force)
-      force=1
-      shift
-      ;;
-    --key-file)
-      key_file="${2:?--key-file requires a path}"
-      shift 2
-      ;;
-    -h | --help)
-      usage
-      exit 0
-      ;;
-    --*)
-      echo "Unknown option: $1" >&2
-      usage >&2
-      exit 1
-      ;;
-    *)
-      args+=("$1")
-      shift
-      ;;
-  esac
-done
-
-if [[ "${#args[@]}" -ne 1 ]]; then
-  usage >&2
-  exit 1
-fi
-dest="${args[0]}"
-
-nix_extra_opts
-
-if [[ -n "${SOPS_AGE_KEY:-}" ]]; then
-  echo "==> Source: \$SOPS_AGE_KEY (inline identity from the environment)."
-  src_content="$SOPS_AGE_KEY"
-else
-  [[ -s "$key_file" ]] || {
-    echo "ERROR: no key found. \$SOPS_AGE_KEY is unset and ${key_file} doesn't exist or is empty." >&2
-    exit 1
-  }
-  echo "==> Source: ${key_file}"
-  src_content="$(cat "$key_file")"
-fi
-
-# Round-trip through a private scratch file (rather than trusting the
-# source string as-is) so age-keygen -y validates it's a real identity
-# before anything is written to <dest-path>.
-scratch="$(mktemp)"
-trap 'rm -f "$scratch"' EXIT
-( umask 077; printf '%s\n' "$src_content" > "$scratch" )
-
-src_pub="$(nix-shell "${NIX_OPTS[@]}" -p age --run "age-keygen -y '$scratch'")" || {
-  echo "ERROR: source doesn't look like a valid age identity (age-keygen -y failed)." >&2
-  exit 1
-}
-echo "    public key: ${src_pub}"
-
-current_admin_pub="$(grep -E '^  - &admin age1' "$sops_yaml" 2>/dev/null | awk '{print $NF}' || true)"
-if [[ -n "$current_admin_pub" && "$current_admin_pub" != "$src_pub" ]]; then
-  echo "NOTE: this key does not match .sops.yaml's current &admin entry (${current_admin_pub})."
-  echo "      Backing it up anyway -- this script doesn't require it to be the admin key."
-fi
-
-if [[ -e "$dest" && "$force" -ne 1 ]]; then
-  echo "ERROR: ${dest} already exists. Pass --force to overwrite." >&2
-  exit 1
-fi
-
-if [[ "$dry_run" -eq 1 ]]; then
-  echo
-  echo "[dry-run] would write $(wc -c <"$scratch" | tr -d ' ') bytes to ${dest} (mode 0600)"
-  [[ -e "$dest" ]] && echo "[dry-run] would overwrite existing file (--force given)"
-  echo "[dry-run] Nothing was written. Re-run without --dry-run to apply this."
-  exit 0
-fi
-
-mkdir -p "$(dirname "$dest")"
-install -m 600 "$scratch" "$dest"
-
-dest_pub="$(nix-shell "${NIX_OPTS[@]}" -p age --run "age-keygen -y '$dest'")"
-if [[ "$dest_pub" != "$src_pub" ]]; then
-  echo "ERROR: ${dest} was written but its public key doesn't match the source -- investigate before relying on this backup." >&2
-  exit 1
-fi
-
-cat <<EOF
-
-Done. Backed up to: ${dest}
-  public key: ${dest_pub}
-
-This is a private key -- store it somewhere offline/secure, not in this
-repo or anywhere it'd get committed. Restore it with:
-  scripts/rotate-admin-key.sh ${dest}
-EOF
@@ -1,133 +0,0 @@
-#!/usr/bin/env bash
-# Bumps the NixOS release branch this flake tracks — flake.nix's
-# `nixpkgs.url` and `home-manager.url` — in one place, via targeted
-# substitution of just those two lines. Deliberately does NOT touch any
-# `system.stateVersion` anywhere in the repo: per NixOS's own docs, that
-# value must stay fixed at whatever it was on a host's first install (it
-# pins on-disk data-format defaults, not "which nixpkgs release am I on"),
-# so it's never something a channel bump should follow.
-#
-# scripts/codex-maintenance.sh's own `nixos-25.11` pin (used only to fetch
-# nixpkgs-fmt/statix — see CLAUDE.md) is a separate, independently-versioned
-# reference on purpose: it doesn't have to track the flake's own nixpkgs
-# input, since the tooling just needs to build, not match. Bump it with
-# --tooling if you want it moved too; the default run leaves it alone.
-set -euo pipefail
-
-repo_root="$(cd "$(dirname "$0")/.." && pwd)"
-flake_nix="${repo_root}/flake.nix"
-maintenance_sh="${repo_root}/scripts/codex-maintenance.sh"
-claude_md="${repo_root}/CLAUDE.md"
-
-usage() {
-  cat <<EOF
-Usage: $0 <release> [--tooling <release>]
-
-  <release>            New NixOS release for flake.nix's nixpkgs.url and
-                        home-manager.url, e.g. 26.11
-  --tooling <release>  Also bump scripts/codex-maintenance.sh's separate
-                        nixpkgs-fmt/statix pin (and its mention in
-                        CLAUDE.md) to this release. Independent of the
-                        first argument — pass the same value if you want
-                        both in sync, a different one if you don't.
-
-Examples:
-  $0 26.11
-  $0 26.11 --tooling 26.11
-EOF
-}
-
-release_re='^[0-9]{2}\.(05|11)$'
-
-if [[ $# -eq 0 || "$1" == "-h" || "$1" == "--help" ]]; then
-  usage
-  exit 0
-fi
-
-new_release="$1"
-shift
-
-tooling_release=""
-while [[ $# -gt 0 ]]; do
-  case "$1" in
-  --tooling)
-    tooling_release="${2:?--tooling requires a release argument}"
-    shift 2
-    ;;
-  *)
-    echo "Unknown argument: $1" >&2
-    usage >&2
-    exit 1
-    ;;
-  esac
-done
-
-check_release_format() {
-  local release="$1"
-  if [[ ! "$release" =~ $release_re ]]; then
-    echo "ERROR: '$release' doesn't look like a NixOS release (expected e.g. 26.11)" >&2
-    exit 1
-  fi
-}
-
-check_branch_exists() {
-  local repo_url="$1" branch="$2"
-  echo "Checking '$branch' exists on $repo_url..."
-  if ! git ls-remote --exit-code --heads "$repo_url" "$branch" >/dev/null; then
-    echo "ERROR: branch '$branch' not found on $repo_url. Typo, or not cut yet?" >&2
-    exit 1
-  fi
-}
-
-check_release_format "$new_release"
-
-current_release="$(grep -oE 'nixos-[0-9]{2}\.[0-9]{2}' "$flake_nix" | head -1 | sed 's/^nixos-//')"
-if [[ -z "$current_release" ]]; then
-  echo "ERROR: couldn't find flake.nix's current nixpkgs release" >&2
-  exit 1
-fi
-
-if [[ "$current_release" == "$new_release" ]]; then
-  echo "flake.nix is already on $new_release."
-else
-  echo "Bumping flake.nix's nixpkgs/home-manager release: $current_release -> $new_release"
-  check_branch_exists "https://github.com/NixOS/nixpkgs.git" "nixos-$new_release"
-  check_branch_exists "https://github.com/nix-community/home-manager.git" "release-$new_release"
-
-  sed -i \
-    -e "s|github:NixOS/nixpkgs/nixos-${current_release}|github:NixOS/nixpkgs/nixos-${new_release}|" \
-    -e "s|github:nix-community/home-manager/release-${current_release}|github:nix-community/home-manager/release-${new_release}|" \
-    "$flake_nix"
-
-  echo "Updated:"
-  grep -n "nixos-${new_release}\|release-${new_release}" "$flake_nix"
-fi
-
-if [[ -n "$tooling_release" ]]; then
-  check_release_format "$tooling_release"
-
-  current_tooling_release="$(grep -oE 'nixos-[0-9]{2}\.[0-9]{2}' "$maintenance_sh" | head -1 | sed 's/^nixos-//')"
-
-  if [[ "$current_tooling_release" == "$tooling_release" ]]; then
-    echo "codex-maintenance.sh's tooling pin is already on $tooling_release."
-  else
-    echo "Bumping codex-maintenance.sh's nixpkgs-fmt/statix pin: $current_tooling_release -> $tooling_release"
-    check_branch_exists "https://github.com/NixOS/nixpkgs.git" "nixos-$tooling_release"
-
-    sed -i "s|github:NixOS/nixpkgs/nixos-${current_tooling_release}|github:NixOS/nixpkgs/nixos-${tooling_release}|g" \
-      "$maintenance_sh"
-    sed -i "s|nixos-${current_tooling_release}|nixos-${tooling_release}|g" \
-      "$claude_md"
-
-    echo "Updated:"
-    grep -n "nixos-${tooling_release}" "$maintenance_sh" "$claude_md"
-  fi
-fi
-
-echo
-echo "flake.lock still points at the old input revisions until refreshed. Either:"
-echo "  nix flake update nixpkgs home-manager   # just these two inputs"
-echo "  nix flake update                        # everything — see docs/flake-lock-automation.md"
-echo
-echo "Then run 'bash scripts/codex-maintenance.sh dry-run' before committing —"
-echo "a channel bump can shift option defaults across every host."
@@ -57,8 +57,9 @@ for host in $hosts; do
  nix eval --raw --no-use-registries --no-accept-flake-config ".#nixosConfigurations.${host}.config.system.build.toplevel.drvPath"

  # lxc-* hosts deploy via a directly pct-restore-able tarball instead of
-  # nixos-install (see docs/auto-installer.md); proxmox-* hosts can
-  # alternatively be built as a standalone disk image (see
+  # nixos-install (see docs/auto-installer.md); proxmox-* hosts (excluding
+  # proxmox-lxc, the installer's own LXC target, which has no disko config)
+  # can alternatively be built as a standalone disk image (see
  # docs/proxmox-images.md). Both are otherwise-unvalidated buildable
  # surface, easy to silently break without this.
  case "$host" in
@@ -66,6 +67,7 @@ for host in $hosts; do
      echo "==> $host (tarball)"
      nix eval --raw --no-use-registries --no-accept-flake-config ".#nixosConfigurations.${host}.config.system.build.tarball.drvPath"
      ;;
+    proxmox-lxc) ;;
    proxmox-*)
      echo "==> $host (diskoImagesScript)"
      nix eval --raw --no-use-registries --no-accept-flake-config ".#nixosConfigurations.${host}.config.system.build.diskoImagesScript.drvPath"
@@ -94,6 +96,7 @@ if [[ "$MODE" == "dry-run" ]]; then
        echo "==> Dry-run build: $host (tarball)"
        nix build --dry-run --no-link --no-use-registries --no-accept-flake-config ".#nixosConfigurations.${host}.config.system.build.tarball"
        ;;
+      proxmox-lxc) ;;
      proxmox-*)
        echo "==> Dry-run build: $host (diskoImagesScript)"
        nix build --dry-run --no-link --no-use-registries --no-accept-flake-config ".#nixosConfigurations.${host}.config.system.build.diskoImagesScript"
@@ -1,557 +0,0 @@
-#!/usr/bin/env bash
-# Creates new Proxmox VMs/LXC containers from this flake, and reconfigures
-# existing ones -- the manual workflows in docs/proxmox-images.md (VM) and
-# docs/auto-installer.md's "LXC hosts" section (container), automated.
-#
-# Usage:
-#   scripts/create-proxmox-resource.sh --type lxc|vm --host <name> [options]
-#   scripts/create-proxmox-resource.sh --type lxc|vm --list
-#   scripts/create-proxmox-resource.sh --modify --vmid <n> [--cores N] [--memory MB] [--grow-disk GB]
-#
-# SAFETY:
-#   - The default (create) mode only ever creates a NEW resource -- it
-#     refuses to run if the target VMID already exists on the node, or if
-#     a VM/CT identified as --host already exists under any other VMID
-#     (checked live against the node; --allow-duplicate-host overrides).
-#   - --modify only ever touches a resource you name explicitly via
-#     --vmid, shows exactly what will change first, and (outside
-#     --dry-run) always requires typing that VMID back to confirm before
-#     anything is sent to the node. There is no bulk/implicit modify.
-#   - Neither mode can start/stop/delete a resource. Not implemented on
-#     purpose -- ask before adding it.
-#
-# See --help for the full option list.
-set -euo pipefail
-
-repo_root="$(cd "$(dirname "$0")/.." && pwd)"
-# shellcheck source=env.sh
-source "${repo_root}/scripts/env.sh"
-
-sync_keys="${repo_root}/scripts/sync-host-keys.sh"
-
-usage() {
-  cat <<EOF
-Usage: $0 --type lxc|vm --host <name> [options]      (create)
-       $0 --type lxc|vm --list                        (list --host values)
-       $0 --modify --vmid <n> [options]                (reconfigure)
-
-Create mode (default):
-  --type lxc|vm        lxc = container, built as a CT template tarball.
-                        vm  = VM, built as a Disko .raw disk image (UEFI/OVMF).
-  --host <name>         Which host identity to deploy -- matches
-                        config.networking.hostName (server, docker,
-                        nix-cache, nixos, pxe-boot, nix-minimal). Use
-                        --list to see what's available for --type.
-  --name <name>          Proxmox display name/hostname (default: --host's
-                          value, e.g. nix-cache -- for lxc this becomes the
-                          guest's real networking.hostName too, since
-                          proxmoxLXC.manageHostName pulls it from Proxmox's
-                          own container config, so it must match host.nix
-                          regardless of build type)
-  --vmid <n>              Numeric VMID (default: next free, via
-                          \`pvesh get /cluster/nextid\` on the node).
-                          Refuses to run if this ID already exists.
-  --disk-size <GB>           lxc only: rootfs size for \`pct create\`
-                              (default: \$PROXMOX_DEFAULT_LXC_DISK_GB, ${PROXMOX_DEFAULT_LXC_DISK_GB}).
-  --image <path>              Use this local image/tarball instead of
-                              checking the node / building one from the flake.
-  --force-rebuild                Skip the "does the node already have this
-                                  image" check -- always build fresh and
-                                  overwrite what's there.
-  --allow-duplicate-host        Required if a VM/CT identified as --host
-                                already exists on the node (checked live via
-                                qm/pct, not any file in this repo) --
-                                otherwise refused, since it'd share that
-                                host's hostName/hostId.
-
-Modify mode (reconfigure an EXISTING resource -- requires --modify):
-  --modify                Switch to modify mode.
-  --vmid <n>                Required: which existing resource to change.
-                            Type/VM-vs-CT is auto-detected on the node.
-  --grow-disk <GB>            Grow the primary disk by this many GB
-                              (qm/pct resize; Proxmox only supports
-                              growing, never shrinking, an existing disk).
-  At least one of --cores / --memory / --grow-disk is required. Always
-  prints the current -> new values and requires typing the VMID back to
-  confirm, even outside --dry-run.
-
-Shared:
-  --cores <n>              create: default \$PROXMOX_DEFAULT_CORES (${PROXMOX_DEFAULT_CORES}).
-                            modify: omit to leave unchanged.
-  --memory <MB>              create: default \$PROXMOX_DEFAULT_MEMORY_MB (${PROXMOX_DEFAULT_MEMORY_MB}).
-                              modify: omit to leave unchanged.
-  --swap <MB>                 lxc only, create time: \`--memory\` doesn't
-                              touch swap -- it silently stays at Proxmox's
-                              own 512M default otherwise. (default: matches
-                              whatever --memory resolves to)
-  --storage <pool>              (default: \$PROXMOX_STORAGE, ${PROXMOX_STORAGE})
-  --iso-storage <pool>            (default: \$PROXMOX_ISO_STORAGE, ${PROXMOX_ISO_STORAGE})
-  --bridge <bridge>                (default: \$PROXMOX_BRIDGE, ${PROXMOX_BRIDGE})
-  --node <host>                     Proxmox node to SSH into (default:
-                                    \$PROXMOX_HOST, ${PROXMOX_HOST})
-  --dry-run                           Print the full plan; touch nothing
-                                      local or remote, no prompts.
-  -h, --help
-
-Config for --storage/--bridge/--node/etc. lives in scripts/env.sh -- edit
-that instead of passing the same flag every time.
-EOF
-}
-
-dry_run=0
-modify=0
-type=""
-host=""
-name=""
-vmid=""
-cores=""
-memory=""
-swap=""
-disk_size=""
-grow_disk=""
-image=""
-storage="$PROXMOX_STORAGE"
-iso_storage="$PROXMOX_ISO_STORAGE"
-bridge="$PROXMOX_BRIDGE"
-node="$PROXMOX_HOST"
-do_list=0
-allow_duplicate_host=0
-force_rebuild=0
-
-while [[ $# -gt 0 ]]; do
-  case "$1" in
-  --type) type="$2"; shift 2 ;;
-  --host) host="$2"; shift 2 ;;
-  --name) name="$2"; shift 2 ;;
-  --vmid) vmid="$2"; shift 2 ;;
-  --cores) cores="$2"; shift 2 ;;
-  --memory) memory="$2"; shift 2 ;;
-  --swap) swap="$2"; shift 2 ;;
-  --disk-size) disk_size="$2"; shift 2 ;;
-  --grow-disk) grow_disk="$2"; shift 2 ;;
-  --image) image="$2"; shift 2 ;;
-  --storage) storage="$2"; shift 2 ;;
-  --iso-storage) iso_storage="$2"; shift 2 ;;
-  --bridge) bridge="$2"; shift 2 ;;
-  --node) node="$2"; shift 2 ;;
-  --list) do_list=1; shift ;;
-  --allow-duplicate-host) allow_duplicate_host=1; shift ;;
-  --force-rebuild) force_rebuild=1; shift ;;
-  --modify) modify=1; shift ;;
-  --dry-run) dry_run=1; shift ;;
-  -h | --help) usage; exit 0 ;;
-  *) echo "Unknown option: $1" >&2; usage >&2; exit 1 ;;
-  esac
-done
-
-ssh_target="${PROXMOX_SSH_USER}@${node}"
-
-remote() {
-  if [[ "$dry_run" -eq 1 ]]; then
-    echo "[dry-run] ssh ${ssh_target} -- $*"
-  else
-    ssh "$ssh_target" "$@"
-  fi
-}
-
-# ============================================================ modify mode
-cmd_modify() {
-  if [[ -z "$vmid" ]]; then
-    echo "ERROR: --modify requires --vmid." >&2
-    exit 1
-  fi
-  if [[ -z "$cores" && -z "$memory" && -z "$grow_disk" ]]; then
-    echo "ERROR: --modify needs at least one of --cores / --memory / --grow-disk." >&2
-    exit 1
-  fi
-
-  echo "Looking up VMID ${vmid} on ${node}..."
-  local kind current_cores current_memory disk_key
-  if ssh "$ssh_target" "qm status ${vmid}" >/dev/null 2>&1; then
-    kind="vm"
-    disk_key="scsi0"
-  elif ssh "$ssh_target" "pct status ${vmid}" >/dev/null 2>&1; then
-    kind="lxc"
-    disk_key="rootfs"
-  else
-    echo "ERROR: VMID ${vmid} doesn't exist on ${node} -- nothing to modify." >&2
-    exit 1
-  fi
-
-  local config_cmd="qm config ${vmid}"
-  [[ "$kind" == "lxc" ]] && config_cmd="pct config ${vmid}"
-  local current_config
-  current_config="$(ssh "$ssh_target" "$config_cmd")"
-  current_cores="$(echo "$current_config" | grep -oP '^cores:\s*\K\S+' || echo '?')"
-  current_memory="$(echo "$current_config" | grep -oP '^memory:\s*\K\S+' || echo '?')"
-
-  echo
-  echo "VMID ${vmid} is a ${kind} on ${node}. Planned changes:"
-  [[ -n "$cores" ]] && echo "  cores:  ${current_cores} -> ${cores}"
-  [[ -n "$memory" ]] && echo "  memory: ${current_memory} MB -> ${memory} MB"
-  [[ -n "$grow_disk" ]] && echo "  ${disk_key}: grow by +${grow_disk}G (Proxmox can only grow, not shrink, an existing disk)"
-
-  if [[ "$dry_run" -eq 1 ]]; then
-    echo
-    echo "[dry-run] Nothing was changed."
-    return
-  fi
-
-  echo
-  read -rp "Type the VMID (${vmid}) to confirm these changes: " confirm
-  if [[ "$confirm" != "$vmid" ]]; then
-    echo "Cancelled -- input didn't match ${vmid}."
-    exit 1
-  fi
-
-  local set_cmd="qm set"
-  local resize_cmd="qm resize"
-  [[ "$kind" == "lxc" ]] && set_cmd="pct set" && resize_cmd="pct resize"
-
-  if [[ -n "$cores" || -n "$memory" ]]; then
-    local args=""
-    [[ -n "$cores" ]] && args="${args} --cores ${cores}"
-    [[ -n "$memory" ]] && args="${args} --memory ${memory}"
-    remote "${set_cmd} ${vmid}${args}"
-  fi
-  if [[ -n "$grow_disk" ]]; then
-    remote "${resize_cmd} ${vmid} ${disk_key} +${grow_disk}G"
-  fi
-
-  echo
-  echo "Done. VMID ${vmid} updated."
-}
-
-if [[ "$modify" -eq 1 ]]; then
-  cmd_modify
-  exit 0
-fi
-
-# ============================================================= create mode
-if [[ "$type" != "lxc" && "$type" != "vm" ]]; then
-  echo "ERROR: --type must be 'lxc' or 'vm'." >&2
-  usage >&2
-  exit 1
-fi
-
-platform_prefix="lxc"
-[[ "$type" == "vm" ]] && platform_prefix="proxmox"
-[[ -z "$cores" ]] && cores="$PROXMOX_DEFAULT_CORES"
-[[ -z "$memory" ]] && memory="$PROXMOX_DEFAULT_MEMORY_MB"
-
-# --- discover / resolve the flake target from --host --------------------
-list_hosts() {
-  local target hostname
-  for target in $(nix eval --json --no-use-registries --no-accept-flake-config \
-    "${repo_root}#nixosConfigurations" --apply builtins.attrNames 2>/dev/null \
-    | jq -r --arg p "${platform_prefix}-" '.[] | select(startswith($p))'); do
-    hostname="$(nix eval --raw --no-use-registries --no-accept-flake-config \
-      "${repo_root}#nixosConfigurations.${target}.config.networking.hostName" 2>/dev/null)"
-    printf '  %-12s -> %s\n' "$hostname" "$target"
-  done
-}
-
-if [[ "$do_list" -eq 1 ]]; then
-  echo "Available --host values for --type ${type}:"
-  list_hosts
-  exit 0
-fi
-
-if [[ -z "$host" ]]; then
-  echo "ERROR: --host is required (or use --list to see options)." >&2
-  exit 1
-fi
-
-flake_target=""
-for target in $(nix eval --json --no-use-registries --no-accept-flake-config \
-  "${repo_root}#nixosConfigurations" --apply builtins.attrNames \
-  | jq -r --arg p "${platform_prefix}-" '.[] | select(startswith($p))'); do
-  hn="$(nix eval --raw --no-use-registries --no-accept-flake-config \
-    "${repo_root}#nixosConfigurations.${target}.config.networking.hostName")"
-  if [[ "$hn" == "$host" ]]; then
-    flake_target="$target"
-    break
-  fi
-done
-
-if [[ -z "$flake_target" ]]; then
-  echo "ERROR: no ${platform_prefix}-* target has hostName '${host}'." >&2
-  echo "Available:" >&2
-  list_hosts >&2
-  exit 1
-fi
-
-# The container/VM's real identity is --host (e.g. "nix-cache"), validated
-# above against config.networking.hostName -- not the flake target name
-# (e.g. "lxc-nix-cache"), which is build-type-specific and only exists to
-# pick which platform variant to build. Defaulting --name to the flake
-# target would make lxc's --hostname (which proxmoxLXC.manageHostName
-# feeds straight into the guest's real hostname) disagree with host.nix.
-[[ -z "$name" ]] && name="$host"
-
-# --- refuse to duplicate a host that's already live on the node ---------
-# Queries the node itself (qm/pct's own name/hostname config), not any
-# static list in this repo -- a file can't track whether a resource still
-# actually exists, and this used to be checked against variables.nix's
-# deployedTargets, which drifted stale (it kept naming a VM as "the real
-# deployment" well after that VM had been destroyed, blocking its own
-# redeploy) until that list was dropped in favour of this live check. This
-# only catches guests identified with the default --name (== --host, what
-# this script itself always uses unless --name is overridden) -- a guest
-# manually renamed on the node afterwards wouldn't match, but nothing here
-# creates guests that way.
-if [[ "$allow_duplicate_host" -eq 1 ]]; then
-  echo
-  echo "--allow-duplicate-host: skipping the check for an existing '${host}' on ${node}."
-elif [[ "$dry_run" -eq 1 ]]; then
-  echo
-  echo "[dry-run] would check ${node} for an existing VM/CT identified as '${host}'"
-else
-  echo
-  echo "==> Checking ${node} for an existing VM/CT identified as '${host}'..."
-  ssh_check_status=0
-  existing="$(ssh "$ssh_target" bash -s -- "$host" <<'REMOTE_SCRIPT'
-target="$1"
-for id in $(qm list 2>/dev/null | awk 'NR>1{print $1}'); do
-  n="$(qm config "$id" 2>/dev/null | grep -oP '^name:\s*\K\S+' || true)"
-  [[ "$n" == "$target" ]] && echo "vm ${id} ${n}"
-done
-for id in $(pct list 2>/dev/null | awk 'NR>1{print $1}'); do
-  n="$(pct config "$id" 2>/dev/null | grep -oP '^hostname:\s*\K\S+' || true)"
-  [[ "$n" == "$target" ]] && echo "lxc ${id} ${n}"
-done
-exit 0
-REMOTE_SCRIPT
-  )" || ssh_check_status=$?
-  if [[ "$ssh_check_status" -ne 0 ]]; then
-    echo "ERROR: couldn't reach ${node} (ssh exited ${ssh_check_status}) to check for an" >&2
-    echo "existing '${host}' resource -- refusing to guess. Fix connectivity and retry," >&2
-    echo "or pass --allow-duplicate-host if you're sure none exists (this skips the" >&2
-    echo "check entirely)." >&2
-    exit 1
-  fi
-  if [[ -n "$existing" ]]; then
-    echo "ERROR: '${host}' already exists on ${node}:" >&2
-    echo "$existing" | while read -r kind id n; do
-      echo "  - ${kind} VMID ${id} (${n})" >&2
-    done
-    echo "Refusing to create a second resource sharing this identity. Pass" >&2
-    echo "--allow-duplicate-host to create one anyway (it gets its own distinct" >&2
-    echo "sops key and VMID -- the existing resource(s) above are left untouched)," >&2
-    echo "or use --modify to reconfigure the existing one instead." >&2
-    exit 1
-  fi
-fi
-
-echo "Target: ${flake_target} (host=${host}, type=${type}) -> Proxmox resource '${name}'"
-
-# Decide on nix-cache once, here -- this is the earliest point that needs
-# it (sync-host-keys.sh below needs nix-shell packages regardless of
-# whether an image ends up getting built later), and the decision is
-# exported so that subprocess -- and this script's own later build step,
-# if it gets there -- both reuse it instead of probing again.
-nix_extra_opts
-
-# --- make sure this target has a registered host key --------------------
-echo
-echo "==> Ensuring host key exists and is registered..."
-sync_args=("$flake_target")
-[[ "$dry_run" -eq 1 ]] && sync_args+=(--dry-run)
-bash "$sync_keys" "${sync_args[@]}"
-
-# --- VMID: pick one, and refuse to touch anything that already exists ---
-echo
-if [[ -z "$vmid" ]]; then
-  if [[ "$dry_run" -eq 1 ]]; then
-    vmid="<next-free-vmid>"
-    echo "[dry-run] would ask ${node} for the next free VMID (pvesh get /cluster/nextid)"
-  else
-    vmid="$(ssh "$ssh_target" "pvesh get /cluster/nextid" | tr -d '[:space:]')"
-    echo "Auto-assigned VMID: ${vmid}"
-  fi
-else
-  echo "Requested VMID: ${vmid}"
-fi
-
-if [[ "$dry_run" -eq 0 ]]; then
-  # qm/pct status exits non-zero (and prints "does not exist") for a free
-  # ID on that resource type -- but a VMID could exist as the OTHER
-  # resource type (e.g. requested a CT id that's actually a VM), so check
-  # both. Any success here means something is already using this ID --
-  # refuse to go anywhere near it. (Reconfiguring an existing resource is
-  # --modify's job, not this one's.)
-  if ssh "$ssh_target" "qm status ${vmid}" >/dev/null 2>&1 \
-    || ssh "$ssh_target" "pct status ${vmid}" >/dev/null 2>&1; then
-    echo "ERROR: VMID ${vmid} already exists on ${node}. Refusing to touch an" >&2
-    echo "existing resource here -- use --modify to reconfigure it, pick a" >&2
-    echo "different --vmid, or omit it to auto-assign." >&2
-    exit 1
-  fi
-fi
-
-# --- resolve the remote path -- fixed naming (not the nix store's own
-# derivation-hash-based filename), so a later run can check for it by name.
-# lxc uploads as a CT *template* (Proxmox's "vztmpl" content type, under
-# iso_storage) -- config.system.build.tarball is a plain rootfs tarball,
-# not a vzdump backup archive, so it's created with `pct create ... vztmpl`,
-# not restored with `pct restore` (that expects backup-archive metadata
-# this tarball doesn't have, and fails with "archive contains no
-# configuration file").
-remote_dir="/var/lib/vz/import"
-remote_filename="${flake_target}.raw"
-if [[ "$type" == "lxc" ]]; then
-  remote_dir="/var/lib/vz/template/cache"
-  remote_filename="${flake_target}.tar.xz"
-fi
-remote_path="${remote_dir}/${remote_filename}"
-
-# --- build (or reuse an image already on the node) ------------------------
-echo
-local_image=""
-image_already_remote=0
-
-if [[ -n "$image" ]]; then
-  [[ -f "$image" ]] || { echo "ERROR: --image '${image}' not found." >&2; exit 1; }
-  local_image="$image"
-  echo "Using provided image: ${local_image}"
-elif [[ "$force_rebuild" -eq 1 ]]; then
-  echo "--force-rebuild: skipping the existing-image check on ${node}."
-else
-  echo "==> Checking whether ${node} already has ${remote_path}..."
-  if [[ "$dry_run" -eq 1 ]]; then
-    echo "[dry-run] would check: ssh ${ssh_target} -- test -f ${remote_path}"
-  elif ssh "$ssh_target" "test -f '${remote_path}'" 2>/dev/null; then
-    echo "Found it -- reusing, skipping build and upload (use --force-rebuild to override)."
-    image_already_remote=1
-  else
-    echo "Not found -- will build."
-  fi
-fi
-
-if [[ "$image_already_remote" -eq 0 && -z "$local_image" ]]; then
-  # Mirrors the real build commands' "${NIX_OPTS[@]}" below -- nix_extra_opts
-  # (called earlier, once) has already decided whether nix-cache is in play,
-  # and the dry-run preview needs to reflect that decision instead of always
-  # printing the same command regardless of outcome.
-  nix_opts_display=""
-  if [[ ${#NIX_OPTS[@]} -gt 0 ]]; then
-    printf -v nix_opts_display '%q ' "${NIX_OPTS[@]}"
-    nix_opts_display=" ${nix_opts_display% }"
-  fi
-  if [[ "$type" == "lxc" ]]; then
-    if [[ "$dry_run" -eq 1 ]]; then
-      echo "[dry-run] would build: NIXOS_HOST_KEYS_DIR=${repo_root}/host-keys nix build --impure \\"
-      echo "[dry-run]   --no-use-registries --no-accept-flake-config${nix_opts_display} \\"
-      echo "[dry-run]   .#nixosConfigurations.${flake_target}.config.system.build.tarball"
-      local_image="<built-tarball>"
-    else
-      echo "==> Building LXC tarball for ${flake_target}..."
-      NIXOS_HOST_KEYS_DIR="${repo_root}/host-keys" nix build --impure \
-        --no-use-registries --no-accept-flake-config "${NIX_OPTS[@]}" \
-        ".#nixosConfigurations.${flake_target}.config.system.build.tarball" \
-        --out-link "${repo_root}/result-${flake_target}"
-      local_image="$(find "${repo_root}/result-${flake_target}/tarball" -maxdepth 1 -type f | head -1)"
-      echo "Built: ${local_image}"
-    fi
-  else
-    if [[ "$dry_run" -eq 1 ]]; then
-      echo "[dry-run] would build: nix build --no-use-registries --no-accept-flake-config${nix_opts_display} \\"
-      echo "[dry-run]   .#nixosConfigurations.${flake_target}.config.system.build.diskoImagesScript"
-      echo "[dry-run] would run:   sudo ./result-${flake_target} \\"
-      echo "[dry-run]                --pre-format-files host-keys/${flake_target}_ssh_host_ed25519_key /etc/ssh/ssh_host_ed25519_key \\"
-      echo "[dry-run]                --pre-format-files host-keys/${flake_target}_ssh_host_ed25519_key.pub /etc/ssh/ssh_host_ed25519_key.pub \\"
-      echo "[dry-run]                --build-memory 2048"
-      local_image="<built-image>.raw"
-    else
-      echo "==> Building Disko image script for ${flake_target}..."
-      nix build --no-use-registries --no-accept-flake-config "${NIX_OPTS[@]}" \
-        ".#nixosConfigurations.${flake_target}.config.system.build.diskoImagesScript" \
-        --out-link "${repo_root}/result-${flake_target}"
-      echo "==> Running it (builds the .raw image in a temporary QEMU VM, needs sudo)..."
-      ( cd "$repo_root" && sudo "./result-${flake_target}" \
-          --pre-format-files "host-keys/${flake_target}_ssh_host_ed25519_key" /etc/ssh/ssh_host_ed25519_key \
-          --pre-format-files "host-keys/${flake_target}_ssh_host_ed25519_key.pub" /etc/ssh/ssh_host_ed25519_key.pub \
-          --build-memory 2048 )
-      local_image="$(find "$repo_root" -maxdepth 1 -name "*.raw" -newer "${repo_root}/result-${flake_target}" | head -1)"
-      if [[ -z "$local_image" ]]; then
-        echo "ERROR: expected a .raw image after the build but didn't find one in ${repo_root}." >&2
-        exit 1
-      fi
-      echo "Built: ${local_image}"
-    fi
-  fi
-fi
-
-# --- upload (skip entirely if reusing an image already on the node) ------
-echo
-if [[ "$image_already_remote" -eq 1 ]]; then
-  : # nothing to upload
-elif [[ "$dry_run" -eq 1 ]]; then
-  echo "[dry-run] would upload: scp ${local_image} ${ssh_target}:${remote_path}"
-else
-  echo "==> Uploading to ${node}:${remote_path}..."
-  ssh "$ssh_target" "mkdir -p ${remote_dir}"
-  scp "$local_image" "${ssh_target}:${remote_path}"
-fi
-
-# --- create -----------------------------------------------------------------
-echo
-if [[ "$type" == "lxc" ]]; then
-  echo "==> Creating LXC container ${vmid} (${name})..."
-  local_disk_size="${disk_size:-$PROXMOX_DEFAULT_LXC_DISK_GB}"
-  # --memory doesn't touch swap -- it silently stays at Proxmox's own
-  # 512M default otherwise (confirmed live: --memory 2048 left swap at
-  # 512). Default to matching whatever --memory resolved to above.
-  local_swap="${swap:-$memory}"
-  # --unprivileged 1: modules/platforms/lxc.nix sets proxmoxLXC.privileged
-  # = false, so the NixOS config inside the image assumes it's running as
-  # an unprivileged container (cgroup/capability/mount expectations baked
-  # in at boot). `pct create`'s own CLI default for this flag is
-  # privileged (unlike the web UI, which defaults its checkbox the other
-  # way) -- leaving it unset creates a privileged container running a
-  # NixOS config that assumes unprivileged, a real mismatch.
-  #
-  # --features nesting=1,keyctl=1: required for a modern (v247+) systemd
-  # guest to actually boot unprivileged -- confirmed live: without this,
-  # AppArmor denies the nested user namespaces and credential mounts
-  # systemd routinely uses (even plain getty units), and every getty
-  # crash-loops on a denied mount every ~3s (visible as garbage on the
-  # console) while core services like nsncd fail the same way.
-  create_cmd="pct create ${vmid} ${iso_storage}:vztmpl/${remote_filename} --unprivileged 1 --features ${PROXMOX_DEFAULT_LXC_FEATURES} --rootfs ${storage}:${local_disk_size} --hostname ${name} --cores ${cores} --memory ${memory} --swap ${local_swap} --net0 name=eth0,bridge=${bridge},ip=dhcp"
-  remote "$create_cmd"
-  remote "pct start ${vmid}"
-else
-  echo "==> Creating VM ${vmid} (${name})..."
-  # pre-enrolled-keys=0 disables OVMF's Secure Boot key pre-enrollment --
-  # required, or systemd-boot (unsigned) can't be trusted by the firmware.
-  remote "qm create ${vmid} --name ${name} --memory ${memory} --cores ${cores} \
--net0 virtio,bridge=${bridge} --bios ovmf --machine q35 --scsihw virtio-scsi-pci \
--efidisk0 ${storage}:1,efitype=4m,pre-enrolled-keys=0"
-
-  if [[ "$dry_run" -eq 1 ]]; then
-    echo "[dry-run] ssh ${ssh_target} -- qm importdisk ${vmid} ${remote_path} ${storage}"
-    echo "[dry-run] (would parse the resulting disk identifier from that output)"
-    echo "[dry-run] ssh ${ssh_target} -- qm set ${vmid} --scsi0 ${storage}:<parsed-disk-id>"
-  else
-    importdisk_output="$(ssh "$ssh_target" "qm importdisk ${vmid} ${remote_path} ${storage}")"
-    echo "$importdisk_output"
-    disk_id="$(echo "$importdisk_output" | grep -oP "(?<=Successfully imported disk as ')[^']+" | sed 's/^unused[0-9]*://')"
-    if [[ -z "$disk_id" ]]; then
-      echo "ERROR: couldn't parse the imported disk identifier from qm importdisk's output above." >&2
-      echo "The VM shell (${vmid}) and imported disk both exist -- finish attaching it by hand:" >&2
-      echo "  ssh ${ssh_target} -- qm set ${vmid} --scsi0 ${storage}:<disk-id-from-output-above>" >&2
-      echo "  ssh ${ssh_target} -- qm set ${vmid} --boot order=scsi0" >&2
-      exit 1
-    fi
-    remote "qm set ${vmid} --scsi0 ${disk_id}"
-  fi
-  remote "qm set ${vmid} --boot order=scsi0"
-  remote "qm start ${vmid}"
-fi
-
-echo
-if [[ "$dry_run" -eq 1 ]]; then
-  echo "[dry-run] Nothing was built, uploaded, or created."
-else
-  echo "Done. ${name} (VMID ${vmid}) should be booting on ${node}."
-fi
@@ -1,147 +0,0 @@
-#!/usr/bin/env bash
-# Shared config for scripts/*.sh. Source this instead of hardcoding a
-# second copy of these values in every script:
-#   source "$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)/env.sh"
-# Every variable can still be overridden per-invocation via the
-# environment (e.g. PROXMOX_STORAGE=tank-nvme ./scripts/create-proxmox-resource.sh ...)
-# since each one only sets a default if unset.
-
-# SSH-reachable Proxmox node that scripts/create-proxmox-resource.sh runs
-# pct/qm on. Matches the Proxmox web UI hostname already used in
-# hosts/nixos/home.nix's desktop shortcuts (pve.<homeDomain> from
-# variables.nix) -- change this if that's not actually reachable over SSH,
-# or if you're targeting a different node in a multi-node cluster.
-: "${PROXMOX_HOST:=pve.sweet.home}"
-: "${PROXMOX_SSH_USER:=root}"
-
-# Storage pool names -- Proxmox's own stock-install defaults, but this
-# varies a lot by setup (ZFS pool name, custom LVM-thin volume, etc.).
-# Verify with `pvesm status` on the node and correct these if wrong.
-: "${PROXMOX_STORAGE:=local-lvm}"     # VM disks / CT rootfs
-: "${PROXMOX_ISO_STORAGE:=local}"     # uploaded images/ISOs/CT templates
-
-: "${PROXMOX_BRIDGE:=vmbr0}"
-
-# Fallback resource sizing when a script doesn't get --cores/--memory.
-: "${PROXMOX_DEFAULT_CORES:=2}"
-: "${PROXMOX_DEFAULT_MEMORY_MB:=2048}"
-
-# `pct create` (unlike `pct restore`) requires an explicit rootfs size --
-# no backup metadata to infer it from. Matches Proxmox's own GUI default.
-: "${PROXMOX_DEFAULT_LXC_DISK_GB:=8}"
-
-# `pct create --memory` only sets RAM -- swap is a wholly separate
-# parameter that otherwise silently stays at Proxmox's own 512M default
-# regardless of --memory (confirmed: creating with --memory 2048 left
-# swap at 512). create-proxmox-resource.sh defaults --swap to whatever
-# --memory resolves to at runtime rather than a static value here, so it
-# tracks a --memory picked at the CLI too, not just the default above.
-
-# Required for a modern (v247+) systemd guest to actually boot as an
-# unprivileged container: systemd's routine use of nested user namespaces
-# and credential mounts (LoadCredential=, DynamicUser=, etc. -- used even
-# by plain getty units) gets denied by AppArmor's default LXC confinement
-# without these. Confirmed live: without them, every getty unit
-# crash-loops on a denied `/run/credentials/*` mount every ~3s (visible
-# as garbage on the console) and core services like nsncd fail the same
-# way on userns_create; system.build.tarball never finishes activating.
-: "${PROXMOX_DEFAULT_LXC_FEATURES:=nesting=1,keyctl=1}"
-
-export PROXMOX_HOST PROXMOX_SSH_USER PROXMOX_STORAGE PROXMOX_ISO_STORAGE \
-  PROXMOX_BRIDGE PROXMOX_DEFAULT_CORES PROXMOX_DEFAULT_MEMORY_MB \
-  PROXMOX_DEFAULT_LXC_DISK_GB PROXMOX_DEFAULT_LXC_FEATURES
-
-# Matches variables.nix's nixCacheHost -- update both if it ever changes.
-: "${NIX_CACHE_HOST:=nix-cache}"
-export NIX_CACHE_HOST
-
-# nix_extra_opts: call as a plain statement (NOT inside $(...)/<(...) --
-# that forks a subshell, and the whole point is exporting a decision back
-# into *this* shell) to populate the global NIX_OPTS array with whatever
-# extra `nix`/`nix-shell` CLI options are needed to avoid nix-cache when
-# it's unreachable:
-#   nix_extra_opts
-#   nix build "${NIX_OPTS[@]}" ...
-#
-# Without this, every single `nix eval`/`nix build` call retries each
-# store path against a dead substituter up to 5 times with backoff
-# (confirmed: ~15s+ per lookup even with a short connect-timeout, because
-# nix's own retry count isn't controllable that way), and separately
-# tries it as a remote builder too -- both fail independently, so both
-# are checked.
-#
-# Checked with a single fast `curl`/TCP probe (bypassing nix's retry logic
-# entirely) the first time this is called in a given process, and the
-# result is exported as NIX_EXTRA_OPTS so a script that shells out to
-# another script in this repo (e.g. create-proxmox-resource.sh calling
-# sync-host-keys.sh) reuses the same decision instead of probing twice.
-declare -a NIX_OPTS=()
-
-nix_extra_opts() {
-  if [[ -n "${NIX_EXTRA_OPTS_DECIDED:-}" ]]; then
-    if [[ -n "${NIX_EXTRA_OPTS:-}" ]]; then
-      eval "NIX_OPTS=(${NIX_EXTRA_OPTS})"
-    else
-      NIX_OPTS=()
-    fi
-    return
-  fi
-  export NIX_EXTRA_OPTS_DECIDED=1
-  NIX_OPTS=()
-
-  # Retry a couple of times, 1s apart, before believing either check --
-  # belt-and-suspenders against a genuine multi-second blip (nix-cache
-  # restarting), on top of the fix below. Worst case (~11s total, host
-  # genuinely gone) is still nowhere near the 15s+ *per lookup* nix's own
-  # substituter retries would cost if this check didn't exist at all.
-  local attempt cache_up=0 builder_up=0
-  for attempt in 1 2 3; do
-    if curl --silent --fail --max-time 3 "http://${NIX_CACHE_HOST}/nix-cache-info" >/dev/null 2>&1; then
-      cache_up=1
-      break
-    fi
-    [[ "$attempt" -lt 3 ]] && sleep 1
-  done
-
-  if [[ "$cache_up" -eq 0 ]]; then
-    echo "nix-cache (http://${NIX_CACHE_HOST}) is unreachable -- skipping it (substituter + remote builder) for the rest of this run." >&2
-    NIX_OPTS=(--option substituters "https://cache.nixos.org/" --builders "")
-  else
-    for attempt in 1 2 3; do
-      # `exec 3<>/dev/tcp/...` just opens the fd and returns -- it does NOT
-      # read from it. Confirmed live this is load-bearing, not stylistic:
-      # the previous `cat < /dev/tcp/.../22` blocked forever and always hit
-      # the timeout even against a perfectly healthy nix-cache, because
-      # sshd sends its banner and then holds the connection open waiting
-      # for the client to speak next -- `cat` never sees EOF, so this
-      # check reported "unreachable" unconditionally, 100% of the time,
-      # regardless of whether the remote builder was actually up.
-      if timeout 3 bash -c "exec 3<>/dev/tcp/${NIX_CACHE_HOST}/22" 2>/dev/null; then
-        builder_up=1
-        break
-      fi
-      [[ "$attempt" -lt 3 ]] && sleep 1
-    done
-    if [[ "$builder_up" -eq 0 ]]; then
-      echo "nix-cache's SSH remote builder (nixremote@${NIX_CACHE_HOST}:22) is unreachable -- disabling remote builds for the rest of this run." >&2
-      NIX_OPTS=(--builders "")
-    fi
-  fi
-
-  # `printf '%q '` with a genuinely empty NIX_OPTS still runs one format
-  # pass over a missing argument and yields the literal `'' ` rather than
-  # an empty string (confirmed live) -- a subprocess that later does
-  # `eval "NIX_OPTS=(${NIX_EXTRA_OPTS})"` (the branch above, for e.g.
-  # sync-host-keys.sh reusing this process's decision) would then rebuild
-  # a 1-element array holding an empty string instead of a 0-element
-  # array, and `nix-shell "${NIX_OPTS[@]}" -p <pkg>` chokes on that stray
-  # element as a bogus positional argument. Guard the empty case
-  # explicitly so nix-cache being reachable (NIX_OPTS legitimately empty)
-  # round-trips as truly empty instead.
-  if [[ ${#NIX_OPTS[@]} -gt 0 ]]; then
-    printf -v NIX_EXTRA_OPTS '%q ' "${NIX_OPTS[@]}"
-  else
-    NIX_EXTRA_OPTS=""
-  fi
-  export NIX_EXTRA_OPTS
-}
@@ -1,180 +0,0 @@
-#!/usr/bin/env python3
-# Companion to scripts/sync-host-keys.sh. Applies a set of additive edits
-# to .sops.yaml via targeted line insertion -- not a full YAML parse and
-# re-serialize -- so every untouched byte of the file is guaranteed to stay
-# exactly as it was (a full round-trip through a generic YAML library was
-# tested and silently reformatted the whole file's indentation style).
-#
-# Reads a JSON edit plan from stdin:
-#   {
-#     "add_keys": [{"host": "lxc-server", "age_key": "age1..."}],
-#     "add_aliases": [{"host": "lxc-server", "basename": "common.yaml"}],
-#     "remove_keys": ["lxc-server"],
-#     "remove_aliases_for_hosts": ["lxc-server"]
-#   }
-# Idempotent: an anchor or alias that's already present/absent is left
-# alone -- adding what's already there, or removing what's already gone,
-# is a no-op rather than an error.
-# Prints a JSON summary of what actually changed to stdout, so the caller
-# knows which secrets/*.yaml files need `sops updatekeys` and which don't.
-import json
-import re
-import sys
-
-KEY_LINE_RE = re.compile(r"^  - &\S+ age1")
-
-
-def add_keys(lines, add_keys):
-    existing_anchors = set()
-    for line in lines:
-        m = re.match(r"^  - &(\S+) age1", line)
-        if m:
-            existing_anchors.add(m.group(1))
-
-    new = [e for e in add_keys if e["host"] not in existing_anchors]
-    if not new:
-        return lines, []
-
-    last_idx = None
-    for i, line in enumerate(lines):
-        if KEY_LINE_RE.match(line):
-            last_idx = i
-    if last_idx is None:
-        print("ERROR: no '  - &<name> age1...' line found under keys: in .sops.yaml", file=sys.stderr)
-        sys.exit(1)
-
-    insert = [f"  - &{e['host']} {e['age_key']}\n" for e in new]
-    lines = lines[: last_idx + 1] + insert + lines[last_idx + 1 :]
-    return lines, [e["host"] for e in new]
-
-
-def add_aliases(lines, add_aliases):
-    changed_files = []
-    for e in add_aliases:
-        host = e["host"]
-        basename = e["basename"]
-        target = "path_regex: secrets/" + basename.replace(".", r"\.") + "$"
-
-        rule_start = None
-        for i, line in enumerate(lines):
-            if target in line:
-                rule_start = i
-                break
-        if rule_start is None:
-            print(
-                f"WARNING: no creation_rule for secrets/{basename} in .sops.yaml "
-                f"(needed by {host}) -- add one manually, then re-run.",
-                file=sys.stderr,
-            )
-            continue
-
-        rule_end = len(lines)
-        for i in range(rule_start + 1, len(lines)):
-            if re.match(r"^  - path_regex:", lines[i]):
-                rule_end = i
-                break
-
-        block = lines[rule_start:rule_end]
-        if any(re.search(r"\*" + re.escape(host) + r"\s*$", line) for line in block):
-            continue  # already present
-
-        last_alias_idx = None
-        last_alias_indent = None
-        for i in range(rule_start, rule_end):
-            m = re.match(r"^(\s*)- \*\S+\s*$", lines[i])
-            if m:
-                last_alias_idx = i
-                last_alias_indent = m.group(1)
-        if last_alias_idx is None:
-            print(
-                f"WARNING: creation_rule for secrets/{basename} has no existing "
-                f"'- *alias' line to anchor the insertion point -- add {host} manually.",
-                file=sys.stderr,
-            )
-            continue
-
-        new_line = f"{last_alias_indent}- *{host}\n"
-        lines = lines[: last_alias_idx + 1] + [new_line] + lines[last_alias_idx + 1 :]
-        changed_files.append(basename)
-    return lines, changed_files
-
-
-def remove_keys(lines, hosts):
-    hosts = set(hosts)
-    removed = []
-    kept = []
-    for line in lines:
-        m = re.match(r"^  - &(\S+) age1", line)
-        if m and m.group(1) in hosts:
-            removed.append(m.group(1))
-            continue
-        kept.append(line)
-    return kept, removed
-
-
-def remove_aliases_for_hosts(lines, hosts):
-    hosts = set(hosts)
-    if not hosts:
-        return lines, []
-
-    changed_files = []
-    result = []
-    current_basename = None
-    current_block_changed = False
-
-    def flush():
-        if current_block_changed and current_basename:
-            changed_files.append(current_basename)
-
-    for line in lines:
-        if re.match(r"^  - path_regex:", line):
-            flush()
-            current_block_changed = False
-            m = re.search(r"path_regex: secrets/(.+)\$", line)
-            current_basename = m.group(1).replace(r"\.", ".") if m else None
-            result.append(line)
-            continue
-
-        if current_basename is not None and any(
-            re.search(r"\*" + re.escape(h) + r"\s*$", line) for h in hosts
-        ):
-            current_block_changed = True
-            continue  # drop this alias line
-
-        result.append(line)
-
-    flush()
-    return result, changed_files
-
-
-def main():
-    sops_path = sys.argv[1]
-    edits = json.load(sys.stdin)
-
-    with open(sops_path) as f:
-        lines = f.readlines()
-
-    lines, added_keys = add_keys(lines, edits.get("add_keys", []))
-    lines, added_alias_files = add_aliases(lines, edits.get("add_aliases", []))
-    lines, removed_keys = remove_keys(lines, edits.get("remove_keys", []))
-    lines, removed_alias_files = remove_aliases_for_hosts(
-        lines, edits.get("remove_aliases_for_hosts", [])
-    )
-
-    with open(sops_path, "w") as f:
-        f.writelines(lines)
-
-    changed_files = sorted(set(added_alias_files) | set(removed_alias_files))
-    json.dump(
-        {
-            "added_keys": added_keys,
-            "removed_keys": removed_keys,
-            "changed_secrets_files": changed_files,
-        },
-        sys.stdout,
-    )
-    print()
-
-
-if __name__ == "__main__":
-    main()
@@ -1,13 +1,9 @@
 #!/usr/bin/env bash
-# Generates a new machine's SSH host key by an arbitrary name, before it
-# necessarily has a flake target yet -- prints the .sops.yaml snippet to
-# add by hand. For any host that already has a flake target,
-# scripts/sync-host-keys.sh <target> does this same job plus the
-# .sops.yaml/key_groups registration and re-encryption automatically; use
-# this script only to pre-generate a key ahead of adding the flake target
-# itself.
+# Generates a new machine's SSH host key ahead of installing it, so
+# sops-nix has something to derive an age key from before the target
+# ever boots.
 #
-# Why a host key is needed at all: sops-nix derives each host's decryption key from
+# Why this is needed: sops-nix derives each host's decryption key from
 # its own /etc/ssh/ssh_host_ed25519_key at *activation* time, but that
 # activation runs before systemd would otherwise generate this key on
 # first boot (sshd-keygen is a normal systemd service gated behind
@@ -66,8 +62,8 @@ Generated: ${keyfile}(.pub)
  a) Rebuild the installer image with all host-keys/ baked in (see
     docs/auto-installer.md):
       NIXOS_HOST_KEYS_DIR="${keydir}" nix build .#iso --impure
-     (or .#pxe — --impure is required since host-keys/ is gitignored and
-     flakes can't see it otherwise)
+     (or .#lxc / .#pxe / .#all — --impure is required since host-keys/
+     is gitignored and flakes can't see it otherwise)

  b) Or, for an image already built without keys, scp it in after boot:
       scp ${keyfile}{,.pub} root@<target-ip>:/root/host-keys/
@@ -1,190 +0,0 @@
-#!/usr/bin/env bash
-# Rotates the &admin sops age key: decrypts with a backed-up copy of the
-# key CURRENTLY trusted as &admin, replaces .sops.yaml's &admin entry with
-# a new key already present in this environment, and re-encrypts every
-# secrets/*.yaml for the new recipient set. After this runs, the old key
-# can no longer decrypt anything -- this is a real, one-way handoff of
-# trust, not a preview.
-#
-# This is the automation for the manual steps create-proxmox-resource.sh /
-# sync-host-keys.sh print when they bootstrap a brand-new, not-yet-trusted
-# age key on a machine that's never had admin access before:
-#
-#   scripts/rotate-admin-key.sh /path/to/backed-up/admin/keys.txt
-#
-# The backup key's *public* key must match .sops.yaml's current &admin
-# entry -- this script verifies that by deriving it, it doesn't just trust
-# the filename or take it on faith. The new key defaults to wherever sops
-# itself would already look ($SOPS_AGE_KEY_FILE, then the XDG default), so
-# the common case is just pointing this at the restored backup.
-set -euo pipefail
-
-repo_root="$(cd "$(dirname "$0")/.." && pwd)"
-sops_yaml="${repo_root}/.sops.yaml"
-
-# shellcheck source=env.sh
-source "${repo_root}/scripts/env.sh"
-
-# sops resolves .sops.yaml by walking up from the process's cwd, not from
-# the target file's own path -- if this script were invoked from somewhere
-# other than the repo root (or from inside another checkout/worktree that
-# happens to have its own .sops.yaml), `sops updatekeys` would silently
-# re-encrypt against the WRONG config's recipient list instead of this
-# repo's. Pin cwd here so every sops/age call below is unambiguous
-# regardless of where the caller's shell started out.
-cd "$repo_root"
-
-usage() {
-  cat <<EOF
-Usage: $0 <path-to-backed-up-admin-key> [--new-key-file <path>] [--dry-run]
-
-  <path-to-backed-up-admin-key>  age identity file for the key CURRENTLY
-                                 trusted as &admin. Only ever read -- never
-                                 copied or modified.
-  --new-key-file <path>          age identity file for the key to promote
-                                 to &admin. Defaults to \$SOPS_AGE_KEY_FILE,
-                                 then
-                                 \${XDG_CONFIG_HOME:-\$HOME/.config}/sops/age/keys.txt
-                                 (sops/age's own default resolution order).
-  --dry-run                      Print what would change; touches nothing
-                                  (.sops.yaml untouched, no sops updatekeys
-                                  calls).
-EOF
-}
-
-dry_run=0
-new_key_file="${SOPS_AGE_KEY_FILE:-${XDG_CONFIG_HOME:-$HOME/.config}/sops/age/keys.txt}"
-args=()
-
-while [[ $# -gt 0 ]]; do
-  case "$1" in
-    --dry-run)
-      dry_run=1
-      shift
-      ;;
-    --new-key-file)
-      new_key_file="${2:?--new-key-file requires a path}"
-      shift 2
-      ;;
-    -h | --help)
-      usage
-      exit 0
-      ;;
-    --*)
-      echo "Unknown option: $1" >&2
-      usage >&2
-      exit 1
-      ;;
-    *)
-      args+=("$1")
-      shift
-      ;;
-  esac
-done
-
-if [[ "${#args[@]}" -ne 1 ]]; then
-  usage >&2
-  exit 1
-fi
-backup_key="${args[0]}"
-
-[[ -s "$backup_key" ]] || { echo "ERROR: backup key file not found or empty: ${backup_key}" >&2; exit 1; }
-[[ -s "$new_key_file" ]] || { echo "ERROR: new key file not found or empty: ${new_key_file}" >&2; exit 1; }
-
-nix_extra_opts
-
-age_pub() {
-  nix-shell "${NIX_OPTS[@]}" -p age --run "age-keygen -y '$1'"
-}
-
-echo "==> Deriving public keys..."
-old_pub="$(age_pub "$backup_key")"
-new_pub="$(age_pub "$new_key_file")"
-echo "    backup (old admin) key: ${old_pub}"
-echo "    new admin key:          ${new_pub}"
-
-if [[ "$old_pub" == "$new_pub" ]]; then
-  echo "ERROR: backup key and new key are identical -- nothing to rotate." >&2
-  exit 1
-fi
-
-current_admin_line="$(grep -E '^  - &admin age1' "$sops_yaml" || true)"
-if [[ -z "$current_admin_line" ]]; then
-  echo "ERROR: couldn't find a '&admin age1...' line in ${sops_yaml}." >&2
-  exit 1
-fi
-current_admin_pub="$(awk '{print $NF}' <<<"$current_admin_line")"
-
-if [[ "$current_admin_pub" != "$old_pub" ]]; then
-  echo "ERROR: ${backup_key} doesn't match the current &admin key in .sops.yaml." >&2
-  echo "  .sops.yaml &admin: ${current_admin_pub}" >&2
-  echo "  backup key pubkey: ${old_pub}" >&2
-  echo "Wrong backup file, or .sops.yaml has already moved on -- not touching anything." >&2
-  exit 1
-fi
-
-mapfile -t secrets_files < <(find "${repo_root}/secrets" -maxdepth 1 -name '*.yaml' | sort)
-if [[ "${#secrets_files[@]}" -eq 0 ]]; then
-  echo "ERROR: no secrets/*.yaml files found under ${repo_root}/secrets." >&2
-  exit 1
-fi
-
-echo "==> Confirming the backup key can actually decrypt..."
-if ! SOPS_AGE_KEY_FILE="$backup_key" nix-shell "${NIX_OPTS[@]}" -p sops --run \
-  "sops -d '${secrets_files[0]}'" >/dev/null; then
-  echo "ERROR: backup key failed to decrypt $(basename "${secrets_files[0]}") -- aborting." >&2
-  exit 1
-fi
-echo "    OK: decrypted $(basename "${secrets_files[0]}")"
-
-if [[ "$dry_run" -eq 1 ]]; then
-  echo
-  echo "[dry-run] would replace .sops.yaml's &admin line:"
-  echo "[dry-run]   - ${current_admin_pub}"
-  echo "[dry-run]   + ${new_pub}"
-  echo "[dry-run] would then re-encrypt (sops updatekeys --yes) for the new recipient set:"
-  for f in "${secrets_files[@]}"; do
-    echo "[dry-run]   secrets/$(basename "$f")"
-  done
-  echo
-  echo "[dry-run] Nothing was changed. Re-run without --dry-run to apply this."
-  exit 0
-fi
-
-echo "==> Rotating .sops.yaml's &admin key..."
-sed -i "s|^  - &admin age1[a-z0-9]*|  - \&admin ${new_pub}|" "$sops_yaml"
-grep -qF "$new_pub" "$sops_yaml" || {
-  echo "ERROR: sed edit didn't take -- .sops.yaml left unchanged, check it by hand." >&2
-  exit 1
-}
-echo "    Updated."
-
-echo "==> Re-encrypting secrets/*.yaml for the new recipient set..."
-for f in "${secrets_files[@]}"; do
-  echo "==> $(basename "$f")"
-  SOPS_AGE_KEY_FILE="$backup_key" nix-shell "${NIX_OPTS[@]}" -p sops --run \
-    "sops updatekeys --yes '${f}'"
-done
-
-echo "==> Verifying the new key can decrypt everything..."
-for f in "${secrets_files[@]}"; do
-  if ! SOPS_AGE_KEY_FILE="$new_key_file" nix-shell "${NIX_OPTS[@]}" -p sops --run \
-    "sops -d '${f}'" >/dev/null; then
-    echo "ERROR: new key failed to decrypt $(basename "$f") after rotation -- investigate before committing." >&2
-    exit 1
-  fi
-  echo "    OK: $(basename "$f")"
-done
-
-cat <<EOF
-
-Done. .sops.yaml's &admin key is now:
-  ${new_pub}
-
-The old key (${old_pub}) can no longer decrypt any secrets/*.yaml
-re-encrypted above.
-
-Review the diff, then commit:
-  git add .sops.yaml secrets/*.yaml
-  git commit -m "Rotate sops admin age key"
-EOF
@@ -1,441 +0,0 @@
-#!/usr/bin/env bash
-# Manages host-keys/ + .sops.yaml + secrets/*.yaml recipients together, so
-# a flake target's SSH host key and its sops registration never drift out
-# of sync with each other or with the flake itself.
-#
-#   sync-host-keys.sh --all                Generate/register every flake
-#                                           target missing a key.
-#   sync-host-keys.sh <target>              Same, for just one target.
-#   sync-host-keys.sh --remove              Interactively remove one
-#                                           locally-managed key.
-#   sync-host-keys.sh --regenerate-all-keys Remove and freshly regenerate
-#                                           every locally-managed key.
-#
-# "Generate/register" is idempotent and additive only: an existing
-# host-keys/ file is never touched, and .sops.yaml only ever gains an
-# anchor/alias it doesn't already have -- safe to re-run any time, e.g.
-# right after adding a new host to flake.nix.
-#
-# --remove and --regenerate-all-keys only ever operate on anchors that have
-# a corresponding host-keys/<name>_ssh_host_ed25519_key file. Anchors
-# without one (&admin, and any anchor for an already-deployed host whose
-# real /etc/ssh key was registered by hand, e.g. &docker/&server/&nix-cache
-# today) are never listed, removed, or regenerated -- this tooling only
-# ever touches keys it itself manages.
-set -euo pipefail
-
-repo_root="$(cd "$(dirname "$0")/.." && pwd)"
-sops_yaml="${repo_root}/.sops.yaml"
-keydir="${repo_root}/host-keys"
-editor="${repo_root}/scripts/lib/sync-host-keys-edit-sops.py"
-
-# shellcheck source=env.sh
-source "${repo_root}/scripts/env.sh"
-
-mkdir -p "$keydir"
-
-usage() {
-  cat <<EOF
-Usage: $0 --all [--dry-run]
-       $0 <flake-target> [--dry-run]
-       $0 --remove [--dry-run]
-       $0 --regenerate-all-keys [--dry-run]
-
-  --all                    Generate + register a host key for every flake
-                            target that's missing one.
-  <flake-target>            Same, for just one target (e.g. lxc-server).
-                            Reports if it already has one.
-  --remove                  Interactively pick one locally-managed key to
-                            remove from .sops.yaml and host-keys/.
-  --regenerate-all-keys     Remove every locally-managed key and generate
-                            fresh replacements for every current flake
-                            target. Destructive -- requires typed
-                            confirmation.
-  --dry-run                 Combine with any of the above: print what would
-                            change (host-keys/ files, .sops.yaml anchors and
-                            key_groups, which secrets/*.yaml would be
-                            re-encrypted) without touching anything. No keys
-                            generated, no files written, no sops calls,
-                            no prompts for confirmation.
-EOF
-}
-
-# --- step 0: make sure we can actually decrypt anything at all -------------
-#
-# Registering a host means editing .sops.yaml and then running
-# `sops updatekeys`, which has to decrypt each secrets file with an
-# existing recipient's key before it can re-encrypt it for the new one.
-# Check this before doing anything else, the same order sops/age itself
-# resolves a usable key in: SOPS_AGE_KEY (inline), then SOPS_AGE_KEY_FILE,
-# then the XDG default path.
-ensure_admin_decrypt_key() {
-  if [[ -n "${SOPS_AGE_KEY:-}" ]]; then
-    echo "Using SOPS_AGE_KEY from the environment."
-    return
-  fi
-
-  local key_file="${SOPS_AGE_KEY_FILE:-${XDG_CONFIG_HOME:-$HOME/.config}/sops/age/keys.txt}"
-
-  if [[ -s "$key_file" ]]; then
-    echo "Found existing sops age key at ${key_file}."
-    return
-  fi
-
-  if [[ "$dry_run" -eq 1 ]]; then
-    echo "[dry-run] No sops age decryption key found (checked \$SOPS_AGE_KEY, \$SOPS_AGE_KEY_FILE, ${key_file})."
-    echo "[dry-run] Would generate a new one here -- continuing the dry run without one; any"
-    echo "[dry-run] 'would re-encrypt' output below couldn't actually run for real yet."
-    return
-  fi
-
-  echo "No sops age decryption key found (checked \$SOPS_AGE_KEY, \$SOPS_AGE_KEY_FILE, ${key_file})."
-  echo "Generating a new one at ${key_file}..."
-  mkdir -p "$(dirname "$key_file")"
-  nix-shell "${NIX_OPTS[@]}" -p age --run "age-keygen -o '${key_file}'" 2>&1 | grep -v "^Public key:" || true
-  local new_pub
-  new_pub="$(nix-shell "${NIX_OPTS[@]}" -p age --run "age-keygen -y '${key_file}'")"
-
-  cat <<EOF
-
-A brand-new age key was just generated -- it cannot decrypt anything that
-already exists in secrets/*.yaml, since nothing was ever encrypted for it.
-That trust can't be bootstrapped automatically (nobody can decrypt a file
-for a recipient that didn't exist when it was last encrypted).
-
-To actually use this key:
-  1. Have someone who currently CAN decrypt replace the &admin entry in
-     .sops.yaml with this public key:
-       ${new_pub}
-  2. They re-encrypt every secrets/*.yaml:
-       sops updatekeys --yes secrets/common.yaml
-       sops updatekeys --yes secrets/nix-cache.yaml
-       sops updatekeys --yes secrets/server.yaml
-  3. Re-run this script.
-
-Exiting without making any other changes.
-EOF
-  exit 1
-}
-
-discover_targets() {
-  nix eval --json --no-use-registries --no-accept-flake-config \
-    "${repo_root}#nixosConfigurations" --apply builtins.attrNames \
-  | jq -r '.[] | select(. != "installer")'
-  # installer is the one nixosConfigurations target that doesn't import
-  # sops-nix at all (see CLAUDE.md's "Security Notes" -- hardcoded login
-  # password instead) -- config.sops.secrets doesn't exist for it.
-}
-
-locally_managed_hosts() {
-  for f in "$keydir"/*_ssh_host_ed25519_key.pub; do
-    [[ -e "$f" ]] || continue
-    basename "$f" _ssh_host_ed25519_key.pub
-  done
-}
-
-add_keys_json="[]"
-add_aliases_json="[]"
-dry_run=0
-
-queue_host_sync() {
-  local host="$1"
-  local keyfile="${keydir}/${host}_ssh_host_ed25519_key"
-  local has_local_key=0 has_anchor=0
-  [[ -f "$keyfile" ]] && has_local_key=1
-  grep -qE "^  - &${host} age1" "$sops_yaml" && has_anchor=1
-
-  if [[ "$has_local_key" -eq 0 && "$has_anchor" -eq 1 ]]; then
-    echo "SKIP ${host}: .sops.yaml already has an &${host} anchor, but"
-    echo "     host-keys/${host}_ssh_host_ed25519_key is missing locally."
-    echo "     Not generating a replacement -- it wouldn't match whatever's"
-    echo "     already registered (and possibly deployed). Remove the"
-    echo "     &${host} line from .sops.yaml first if you really want a"
-    echo "     fresh key, then re-run."
-    return 1
-  fi
-
-  if [[ "$has_local_key" -eq 0 ]]; then
-    if [[ "$dry_run" -eq 1 ]]; then
-      echo "[dry-run] ${host}: would generate host key"
-    else
-      echo "==> ${host}: generating host key"
-      nix-shell "${NIX_OPTS[@]}" -p openssh --run "ssh-keygen -t ed25519 -N '' -C '${host}' -f '${keyfile}'" >/dev/null
-    fi
-  else
-    echo "==> ${host}: host key already present"
-  fi
-
-  if [[ "$has_anchor" -eq 0 ]]; then
-    local age_pub
-    if [[ "$dry_run" -eq 1 ]]; then
-      age_pub="dry-run-placeholder-not-a-real-key"
-    else
-      age_pub="$(nix-shell "${NIX_OPTS[@]}" -p ssh-to-age --run "ssh-to-age -i '${keyfile}.pub'")"
-    fi
-    add_keys_json="$(jq --arg host "$host" --arg key "$age_pub" \
-      '. + [{host: $host, age_key: $key}]' <<<"$add_keys_json")"
-  fi
-
-  echo "==> ${host}: checking which secrets files it references"
-  local basenames
-  mapfile -t basenames < <(
-    nix eval --json --no-use-registries --no-accept-flake-config \
-      "${repo_root}#nixosConfigurations.${host}.config.sops.secrets" \
-      --apply 'builtins.mapAttrs (n: v: baseNameOf v.sopsFile)' \
-    | jq -r '[.[]] | unique | .[]'
-  )
-  local basename
-  for basename in "${basenames[@]}"; do
-    add_aliases_json="$(jq --arg host "$host" --arg basename "$basename" \
-      '. + [{host: $host, basename: $basename}]' <<<"$add_aliases_json")"
-  done
-}
-
-# In dry-run, this runs the exact same edit logic (so idempotency/what's-
-# actually-new is determined for real, not guessed) but against a scratch
-# copy of .sops.yaml that's discarded afterward -- the real file is never
-# opened for writing, and `sops updatekeys` never runs.
-apply_edit_plan() {
-  local plan="$1"
-  local target="$sops_yaml"
-  local tmpfile=""
-  if [[ "$dry_run" -eq 1 ]]; then
-    tmpfile="$(mktemp)"
-    cp "$sops_yaml" "$tmpfile"
-    target="$tmpfile"
-  fi
-
-  local result
-  result="$(echo "$plan" | nix-shell "${NIX_OPTS[@]}" -p python3 --run "python3 '${editor}' '${target}'")"
-  [[ -n "$tmpfile" ]] && rm -f "$tmpfile"
-
-  local added removed changed
-  added="$(jq -r '.added_keys[]?' <<<"$result")"
-  removed="$(jq -r '.removed_keys[]?' <<<"$result")"
-  changed="$(jq -r '.changed_secrets_files[]?' <<<"$result")"
-
-  if [[ -z "$added" && -z "$removed" && -z "$changed" ]]; then
-    echo "Nothing changed in .sops.yaml."
-    return
-  fi
-
-  local prefix=""
-  [[ "$dry_run" -eq 1 ]] && prefix="[dry-run] would "
-
-  [[ -n "$added" ]] && echo "${prefix}Add .sops.yaml anchors: $(tr '\n' ' ' <<<"$added")"
-  [[ -n "$removed" ]] && echo "${prefix}Remove .sops.yaml anchors: $(tr '\n' ' ' <<<"$removed")"
-
-  if [[ -n "$changed" ]]; then
-    if [[ "$dry_run" -eq 1 ]]; then
-      echo "[dry-run] would re-encrypt:"
-      while IFS= read -r basename; do
-        [[ -z "$basename" ]] && continue
-        echo "  secrets/${basename}"
-      done <<<"$changed"
-    else
-      echo "Re-encrypting affected secrets files..."
-      while IFS= read -r basename; do
-        [[ -z "$basename" ]] && continue
-        echo "==> secrets/${basename}"
-        nix-shell "${NIX_OPTS[@]}" -p sops --run "sops updatekeys --yes '${repo_root}/secrets/${basename}'"
-      done <<<"$changed"
-    fi
-  fi
-}
-
-flush_additions() {
-  if [[ "$add_keys_json" == "[]" && "$add_aliases_json" == "[]" ]]; then
-    echo "Nothing to do -- every requested target already has a fully registered host key."
-    return
-  fi
-  echo
-  echo "Applying .sops.yaml edits..."
-  local plan
-  plan="$(jq -n --argjson add_keys "$add_keys_json" --argjson add_aliases "$add_aliases_json" \
-    '{add_keys: $add_keys, add_aliases: $add_aliases}')"
-  apply_edit_plan "$plan"
-  echo
-  if [[ "$dry_run" -eq 1 ]]; then
-    echo "[dry-run] Nothing was changed. Re-run without --dry-run to apply this."
-  else
-    echo "Done. Review the .sops.yaml / secrets/*.yaml diff, then commit and push --"
-    echo "the flake build the installer uses has to see the new recipient(s) before"
-    echo "any of these hosts can decrypt their secrets on first boot."
-  fi
-}
-
-cmd_all() {
-  echo "Discovering flake targets..."
-  local targets
-  mapfile -t targets < <(discover_targets)
-  local host
-  for host in "${targets[@]}"; do
-    queue_host_sync "$host" || true
-  done
-  flush_additions
-}
-
-cmd_target() {
-  local host="$1"
-  local targets
-  mapfile -t targets < <(discover_targets)
-  if ! printf '%s\n' "${targets[@]}" | grep -qxF "$host"; then
-    echo "ERROR: '${host}' is not a current nixosConfigurations target." >&2
-    echo "Current targets:" >&2
-    printf '  %s\n' "${targets[@]}" >&2
-    exit 1
-  fi
-  queue_host_sync "$host" || exit 1
-  flush_additions
-}
-
-cmd_remove() {
-  local hosts
-  mapfile -t hosts < <(locally_managed_hosts)
-  if [[ "${#hosts[@]}" -eq 0 ]]; then
-    echo "No locally-managed keys in host-keys/ -- nothing to remove."
-    return
-  fi
-
-  echo "Locally-managed keys:"
-  local i=1 host
-  for host in "${hosts[@]}"; do
-    local registered="not registered in .sops.yaml"
-    grep -qE "^  - &${host} age1" "$sops_yaml" && registered="registered in .sops.yaml"
-    printf '  %d) %s (%s)\n' "$i" "$host" "$registered"
-    i=$((i + 1))
-  done
-
-  local choice
-  read -rp "Remove which one? (number, or blank to cancel): " choice
-  if [[ -z "$choice" ]]; then
-    echo "Cancelled."
-    return
-  fi
-  if ! [[ "$choice" =~ ^[0-9]+$ ]] || (( choice < 1 || choice > ${#hosts[@]} )); then
-    echo "ERROR: invalid selection." >&2
-    exit 1
-  fi
-  local target="${hosts[$((choice - 1))]}"
-
-  if [[ "$dry_run" -ne 1 ]]; then
-    read -rp "Really remove '${target}'? Its host-keys/ files will be deleted and it will lose access to every secrets file it can currently decrypt. (y/N): " confirm
-    if [[ ! "$confirm" =~ ^[Yy]$ ]]; then
-      echo "Cancelled."
-      return
-    fi
-  fi
-
-  local plan
-  plan="$(jq -n --arg host "$target" \
-    '{remove_keys: [$host], remove_aliases_for_hosts: [$host]}')"
-  apply_edit_plan "$plan"
-
-  if [[ "$dry_run" -eq 1 ]]; then
-    echo "[dry-run] would delete host-keys/${target}_ssh_host_ed25519_key(.pub)."
-    echo "[dry-run] Nothing was changed. Re-run without --dry-run to apply this."
-  else
-    rm -f "${keydir}/${target}_ssh_host_ed25519_key" "${keydir}/${target}_ssh_host_ed25519_key.pub"
-    echo "Removed host-keys/${target}_ssh_host_ed25519_key(.pub)."
-    echo
-    echo "Review the diff, then commit and push."
-  fi
-}
-
-cmd_regenerate_all() {
-  local hosts
-  mapfile -t hosts < <(locally_managed_hosts)
-  if [[ "${#hosts[@]}" -eq 0 ]]; then
-    echo "No locally-managed keys in host-keys/ -- nothing to regenerate."
-    return
-  fi
-
-  echo "This will remove and freshly regenerate ALL locally-managed keys:"
-  printf '  %s\n' "${hosts[@]}"
-  echo
-  echo "Every host above will need its new key baked into a rebuilt install"
-  echo "image/tarball before it can decrypt secrets again."
-
-  if [[ "$dry_run" -ne 1 ]]; then
-    read -rp "Type REGENERATE to confirm: " confirm
-    if [[ "$confirm" != "REGENERATE" ]]; then
-      echo "Cancelled."
-      return
-    fi
-  fi
-
-  echo
-  local hosts_json
-  hosts_json="$(printf '%s\n' "${hosts[@]}" | jq -R . | jq -s .)"
-  local plan
-  plan="$(jq -n --argjson hosts "$hosts_json" \
-    '{remove_keys: $hosts, remove_aliases_for_hosts: $hosts}')"
-  apply_edit_plan "$plan"
-
-  if [[ "$dry_run" -eq 1 ]]; then
-    echo "[dry-run] would delete ${#hosts[@]} host-keys/ file pair(s)."
-    echo "[dry-run] would then generate fresh replacements for the same hosts"
-    echo "[dry-run] (not simulated further here -- run without --dry-run, or"
-    echo "[dry-run] preview a specific target with: $0 <target> --dry-run)."
-    echo
-    echo "[dry-run] Nothing was changed. Re-run without --dry-run to apply this."
-    return
-  fi
-
-  echo "Removing existing keys..."
-  local host
-  for host in "${hosts[@]}"; do
-    rm -f "${keydir}/${host}_ssh_host_ed25519_key" "${keydir}/${host}_ssh_host_ed25519_key.pub"
-  done
-  echo "Removed ${#hosts[@]} host-keys/ file pair(s)."
-
-  echo
-  echo "Regenerating fresh keys for every current flake target..."
-  cmd_all
-}
-
-main() {
-  local args=()
-  local arg
-  for arg in "$@"; do
-    if [[ "$arg" == "--dry-run" ]]; then
-      dry_run=1
-    else
-      args+=("$arg")
-    fi
-  done
-  set -- "${args[@]+"${args[@]}"}"
-
-  if [[ "$dry_run" -eq 1 ]]; then
-    echo "[dry-run] no changes will be made"
-    echo
-  fi
-
-  nix_extra_opts
-  ensure_admin_decrypt_key
-
-  case "${1:-}" in
-    --all)
-      cmd_all
-      ;;
-    --remove)
-      cmd_remove
-      ;;
-    --regenerate-all-keys)
-      cmd_regenerate_all
-      ;;
-    -h | --help | "")
-      usage
-      ;;
-    --*)
-      echo "Unknown option: $1" >&2
-      usage >&2
-      exit 1
-      ;;
-    *)
-      cmd_target "$1"
-      ;;
-  esac
-}
-
-main "$@"
@@ -1,5 +1,4 @@
 beszel-token: ENC[AES256_GCM,data:meuzUP/6wCssJDVTgbC0XwiLZPMGyDl55HEIiON9xOXCD9k6,iv:TDqWcp+8Mxd8wN09r5otQRQXq3XTeQphaTWxvvuLTAs=,tag:cRPZQGlwB/dTguBAheWPQg==,type:str]
-cache-priv-key: ENC[AES256_GCM,data:6vQKIf7eS0WNL2Eptoi4VWr18SRMZfN/H/aFUUtXdMYQY5LLyBp2EHRKqZcGFuh1nZhUdAxUztq/CVXx+QFxKW+ElHxCxUSp0QqI1fdSkBkKZb8hlit5SoX9JtLzZGg0HBNM3nJu,iv:0J+xmrPJhInHhFR/c41ACjuTfaIoMkQFSfbL2KkgFa8=,tag:f4s9Szs5oprVVRSyXaX48A==,type:str]
 sops:
    age:
        - enc: |
@@ -29,7 +28,7 @@ sops:
            2SEMsctdGC+5E3ilPXvPpZ5RONZHbXxn6kQRBlBv6AJERpGDzsfgfA==
            -----END AGE ENCRYPTED FILE-----
          recipient: age164px2a8e48ptsf9ngtan38aa6jls4jdl26mzrgzf6sn3vcvt49hqjrgr8w
-    lastmodified: "2026-07-19T23:30:21Z"
-    mac: ENC[AES256_GCM,data:kLGE2xawQT7mx+sfw68hmGk5nCEGiEjZrqTEl9B1dtQmTrMwmoVr/1RISi4LfJrwxy31mDgff4lcIL4wIJuM373uk3X8j4RNyYQNTfKEkORT6r8NHeepNs267O77pKGd7OmcM4MT/BqOnB8ELS7Wlf2ect7CAlvUUVyc8icxgZE=,iv:EYLDsHYHZ1XOQXafOTqHHWpk/OBNq/R6IJnOBYV33E4=,tag:thxrCPC5oGvDjhK7Dz87YA==,type:str]
+    lastmodified: "2026-07-19T02:30:40Z"
+    mac: ENC[AES256_GCM,data:7+FeT6aeCGn+JFBXbPO0qP4BJ1nHPSennewv1kWkG+hOTIqs1ymuswUK1Hyfi6Z9h2umFX9HvK+o3qtmYvk6k7BUNe6w6QUHTNwm6lmNqrb7sgAE3iFVI2p9m14NGhgoTfnXx1M4JIZ1iuNYhCukpENI4+svIe+r7x5YeE5Evac=,iv:4AKAPI6upyAvHBr8BLWX7R/NupmJdcXdqiN8e0ZQ3ls=,tag:TkpfpCaLhn+Mx5cQZZuMdA==,type:str]
    unencrypted_suffix: _unencrypted
    version: 3.13.1
@@ -12,22 +12,8 @@
  nfsServerHost = "server"; # NFS export source hostname
  dockerHost = "docker"; # docker-compose stack host

-  # Raspberry Pi's own Tailscale hostname (not fronted by `server` — it
-  # exports its own NFS share directly). Resolved as
-  # "${raspberryPiHost}.${tailnetDomain}" in modules/raspi/mount-data.nix.
-  raspberryPiHost = "raspberrypi";
-
  remoteBuilderUser = "nixremote"; # remote builder SSH user

-  # nix-cache's own SSH host public key (not a secret — the private half
-  # never leaves the host). Wired into every client's
-  # programs.ssh.knownHosts by modules/nix-cache/remote-builder-client.nix
-  # so distributed builds don't hit "Host key verification failed" on a
-  # fresh client that has never manually ssh'd to nix-cache before. Update
-  # this if nix-cache's host key is ever rotated or the host is rebuilt
-  # from scratch.
-  nixCacheHostKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHrMKZlIGUd3pH9G3AqbsruqUGjxIXMAZw52u9MwiBCn lxc-nix-cache";
-
  # Public keys authorized to SSH in as remoteBuilderUser on the nix-cache
  # host (modules/nix-cache/server.nix) — one per client host that's allowed
  # to use it as a distributed builder.
@@ -46,114 +32,13 @@

  # System
  timeZone = "Australia/Brisbane";
-
-  # Main interactive user on every host. Every module that grants this user
-  # a group, a home directory, or tmpfiles ownership should reference
-  # vars.primaryUser rather than the literal "nixos", so renaming it is a
-  # one-line change.
-  primaryUser = "nixos";
+  primaryUser = "nixos"; # main interactive user on every host

  # Storage
  storageRoot = "/tank"; # ZFS pool root on `server`

-  # NFS datasets exported from `storageRoot` on `nfsServerHost` and mounted
-  # by client hosts. `subpath` is relative to `storageRoot` — combined with
-  # it to build both the export line in modules/build-types/server.nix and
-  # the "<nfsServerHost>:<storageRoot>/<subpath>" device string each client
-  # mount uses in modules/docker/mount-data.nix. `mountpoint` is the
-  # absolute local path clients mount it at, referenced by that same file's
-  # fileSystems attribute name plus every other place that needs to know
-  # where the share lives locally (modules/build-types/docker.nix's
-  # tmpfiles rules, modules/traefik/rotate-logs.nix's log path). Renaming a
-  # dataset or moving where it's mounted only needs changing it here — the
-  # export and every client reference follow automatically.
-  nfsShares = {
-    dockerConfig = {
-      subpath = "docker/config";
-      mountpoint = "/mnt/docker/config";
-    };
-    dockerDatabases = {
-      subpath = "docker/databases";
-      mountpoint = "/mnt/docker/databases";
-    };
-    dockerVolumes = {
-      subpath = "docker/volumes";
-      mountpoint = "/mnt/docker/volumes";
-    };
-    nextcloudData = {
-      subpath = "docker/nextcloud-data";
-      mountpoint = "/mnt/nextcloud-data";
-    };
-    raspiVolumes = {
-      subpath = "raspi/volumes";
-      mountpoint = "/mnt/raspi-backup";
-    };
-  };
-
-  # The Raspberry Pi's own NFS export — not under storageRoot/nfsServerHost,
-  # served directly by the Pi itself over Tailscale (see raspberryPiHost
-  # above) and mounted at raspiMountpoint by modules/raspi/mount-data.nix.
-  raspiNfsPath = "/home/raspi/raspi";
-  raspiMountpoint = "/mnt/raspi";
-
-  # Every literal port referenced from modules/ or hosts/, grouped by the
-  # service/host that opens or connects to it — kept as separate entries
-  # even where two happen to share a number today (e.g. nixCacheHttp and
-  # pxeBootHttp are both 80) so changing one service's port can never
-  # silently change an unrelated one.
-  ports = {
-    # nix-cache's nginx reverse proxy in front of nix-serve
-    # (modules/nix-cache/server.nix).
-    nixCacheHttp = 80;
-
-    # pxe-boot's nginx asset server, also used to build pxeBaseUrl
-    # (modules/build-types/pxe-boot.nix).
-    pxeBootHttp = 80;
-
-    # pxe-boot's atftpd TFTP server — UDP, not TCP
-    # (modules/build-types/pxe-boot.nix).
-    pxeBootTftp = 69;
-
-    # `server`'s NFS exports need both the portmapper (rpcbind) and the
-    # NFS data port itself opened (modules/build-types/server.nix).
-    nfsRpcbind = 111;
-    nfsd = 2049;
-
-    # Opened on the docker host's firewall for the Traefik-fronted
-    # container stack (docker-compose config lives in the separate
-    # /home/debian/docker repo, not here): 80/443 are Traefik's own
-    # HTTP/HTTPS listeners; 8080 is an additional exposed service whose
-    # exact backend isn't declared in this repo (modules/build-types/docker.nix).
-    dockerHttp = 80;
-    dockerHttps = 443;
-    dockerExtra = 8080;
-
-    # Beszel monitoring hub, reachable at
-    # http://<dockerHost>.<homeDomain>:<beszelHub> from every agent
-    # (modules/beszel/enable-agent.nix, hosts/nixos/home.nix).
-    beszelHub = 8090;
-
-    # Proxmox VE and Proxmox Backup Server web UIs, opened as desktop
-    # shortcuts on the gui build type (hosts/nixos/home.nix).
-    pveWeb = 8006;
-    pbsWeb = 8007;
-  };
-
-  # .raw disk image size for every proxmox-* host's standalone Disko image
-  # build (modules/disko/proxmox.nix, config.system.build.diskoImagesScript
-  # — see docs/proxmox-images.md). Root fills whatever's left after the ESP
-  # and swap partitions within this total.
-  proxmoxImageSize = "20G";
-
-  # nix-cache's Nix store garbage collection retention
-  # (modules/nix-cache/server.nix).
-  nixCacheGcMaxAge = "30d";
-
-  # Traefik access log rotation, watched on the docker host at
-  # nfsShares.dockerVolumes.mountpoint (modules/traefik/rotate-logs.nix).
-  traefikLogRotate = {
-    maxSize = "100M"; # rotate once a log file exceeds this size
-    keep = 20; # number of rotated logs to retain before deleting the oldest
-  };
-
+  # Well-known ports for LAN services referenced from multiple hosts
+  beszelHubPort = 8090;
+  pveWebPort = 8006;
+  pbsWebPort = 8007;
 }