updated to efi boot and resolved module paths

configuration.nix

@@ -1,123 +0,0 @@
-# Edit this configuration file to define what should be installed on
-# your system. Help is available in the configuration.nix(5) man page, on
-# https://search.nixos.org/options and in the NixOS manual (`nixos-help`).
-
-{ config, lib, pkgs, ... }:
-
-{
-  imports =
-    [ # Include the results of the hardware scan.
-      ./hardware-configuration.nix
-    ];
-
-  # Use the systemd-boot EFI boot loader.
-  boot.loader.systemd-boot.enable = true;
-  boot.loader.efi.canTouchEfiVariables = true;
-
-  # networking.hostName = "nixos"; # Define your hostname.
-  # Pick only one of the below networking options.
-  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
-  # networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
-
-  # Set your time zone.
-  # time.timeZone = "Europe/Amsterdam";
-
-  # Configure network proxy if necessary
-  # networking.proxy.default = "http://user:password@proxy:port/";
-  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
-
-  # Select internationalisation properties.
-  # i18n.defaultLocale = "en_US.UTF-8";
-  # console = {
-  #   font = "Lat2-Terminus16";
-  #   keyMap = "us";
-  #   useXkbConfig = true; # use xkb.options in tty.
-  # };
-
-  # Enable the X11 windowing system.
-  # services.xserver.enable = true;
-
-
-  
-
-  # Configure keymap in X11
-  # services.xserver.xkb.layout = "us";
-  # services.xserver.xkb.options = "eurosign:e,caps:escape";
-
-  # Enable CUPS to print documents.
-  # services.printing.enable = true;
-
-  # Enable sound.
-  # services.pulseaudio.enable = true;
-  # OR
-  # services.pipewire = {
-  #   enable = true;
-  #   pulse.enable = true;
-  # };
-
-  # Enable touchpad support (enabled default in most desktopManager).
-  # services.libinput.enable = true;
-
-  # Define a user account. Don't forget to set a password with ‘passwd’.
-  # users.users.alice = {
-  #   isNormalUser = true;
-  #   extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
-  #   packages = with pkgs; [
-  #     tree
-  #   ];
-  # };
-
-  # programs.firefox.enable = true;
-
-  # List packages installed in system profile.
-  # You can use https://search.nixos.org/ to find more packages (and options).
-  # environment.systemPackages = with pkgs; [
-  #   vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
-  #   wget
-  # ];
-
-  # Some programs need SUID wrappers, can be configured further or are
-  # started in user sessions.
-  # programs.mtr.enable = true;
-  # programs.gnupg.agent = {
-  #   enable = true;
-  #   enableSSHSupport = true;
-  # };
-
-  # List services that you want to enable:
-
-  # Enable the OpenSSH daemon.
-  # services.openssh.enable = true;
-
-  # Open ports in the firewall.
-  # networking.firewall.allowedTCPPorts = [ ... ];
-  # networking.firewall.allowedUDPPorts = [ ... ];
-  # Or disable the firewall altogether.
-  # networking.firewall.enable = false;
-
-  # Copy the NixOS configuration file and link it from the resulting system
-  # (/run/current-system/configuration.nix). This is useful in case you
-  # accidentally delete configuration.nix.
-  # system.copySystemConfiguration = true;
-
-  # This option defines the first version of NixOS you have installed on this particular machine,
-  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
-  #
-  # Most users should NEVER change this value after the initial install, for any reason,
-  # even if you've upgraded your system to a new NixOS release.
-  #
-  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
-  # so changing it will NOT upgrade your system - see https://nixos.org/manual/nixos/stable/#sec-upgrading for how
-  # to actually do that.
-  #
-  # This value being lower than the current NixOS release does NOT mean your system is
-  # out of date, out of support, or vulnerable.
-  #
-  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
-  # and migrated your data accordingly.
-  #
-  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
-  system.stateVersion = "25.05"; # Did you read the comment?
-
-}
-

flake.nix

@@ -32,6 +32,7 @@
         nixos = nixpkgs.lib.nixosSystem {
           inherit system;
           modules = [
+            inputs.disko.nixosModules.disko
             ./hosts/nixos/configuration.nix
             ./modules/hardware-configuration/vm/proxmox.nix
 
@@ -61,6 +62,7 @@ docker = nixpkgs.lib.nixosSystem {
   };
 
   modules = [
+    inputs.disko.nixosModules.disko
     ./hosts/docker/configuration.nix
     ./modules/hardware-configuration/vm/proxmox.nix
 
@@ -71,23 +73,12 @@ docker = nixpkgs.lib.nixosSystem {
     }
   ];
 };
-        kuma = nixpkgs.lib.nixosSystem {
-          inherit system;
-          modules = [
-            ./hosts/kuma/configuration.nix
-            ./modules/hardware-configuration/vm/proxmox.nix
 
-            home-manager.nixosModules.home-manager {
-              home-manager.useGlobalPkgs = true;
-              home-manager.useUserPackages = true;
-              home-manager.users.nixos = import ./modules/common/home.nix;
-            }
-          ];
-        };
 
         server = nixpkgs.lib.nixosSystem {
           inherit system;
           modules = [
+            inputs.disko.nixosModules.disko
             ./hosts/server/configuration.nix
             ./modules/hardware-configuration/vm/proxmox.nix
 
@@ -102,6 +93,7 @@ docker = nixpkgs.lib.nixosSystem {
         nix-cache = nixpkgs.lib.nixosSystem {
           inherit system;
           modules = [
+            inputs.disko.nixosModules.disko
             ./hosts/nix-cache/configuration.nix
             ./modules/hardware-configuration/vm/proxmox.nix
 

hardware-configuration.nix

@@ -1,39 +0,0 @@
-# Do not modify this file!  It was generated by ‘nixos-generate-config’
-# and may be overwritten by future invocations.  Please make changes
-# to /etc/nixos/configuration.nix instead.
-{ config, lib, pkgs, modulesPath, ... }:
-
-{
-  imports =
-    [ (modulesPath + "/profiles/qemu-guest.nix")
-    ];
-
-  boot.initrd.availableKernelModules = [ "ata_piix" "uhci_hcd" "virtio_pci" "virtio_scsi" "sd_mod" "sr_mod" ];
-  boot.initrd.kernelModules = [ ];
-  boot.kernelModules = [ "kvm-amd" ];
-  boot.extraModulePackages = [ ];
-
-  fileSystems."/" =
-    { device = "/dev/disk/by-uuid/5d2613a6-7f60-43e4-8d13-05c5c4bab09d";
-      fsType = "ext4";
-    };
-
-  fileSystems."/boot" =
-    { device = "/dev/disk/by-uuid/A28A-9C15";
-      fsType = "vfat";
-      options = [ "fmask=0077" "dmask=0077" ];
-    };
-
-  swapDevices =
-    [ { device = "/dev/disk/by-uuid/4e3ccb67-cf77-4dc8-872c-6fc57869fb8b"; }
-    ];
-
-  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
-  # (the default) this is the recommended approach. When using systemd-networkd it's
-  # still possible to use this option, but it's recommended to use it in conjunction
-  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
-  networking.useDHCP = lib.mkDefault true;
-  # networking.interfaces.ens18.useDHCP = lib.mkDefault true;
-
-  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
-}

hosts/docker/configuration.nix

@@ -18,6 +18,8 @@
       ../../modules/services/nextcloud-cron-job.nix
       ../../modules/services/docker-health-to-gotify.nix
       ../../modules/services/enable-rpcbind.nix
+      ../../modules/disko/proxmox.nix
+      ../../modules/boot/efi.nix
     ];
 
 

hosts/nix-cache/configuration.nix

@@ -10,6 +10,8 @@
       ../../modules/common/configuration.nix
       ../../modules/nix-cache/server.nix
       ../../modules/beszel/enable-agent.nix
+      ../../modules/disko/proxmox.nix
+      ../../modules/boot/efi.nix
     ];
 
   networking.hostName = "nix-cache"; # Define your hostname.

hosts/nixos/configuration.nix

@@ -28,8 +28,10 @@ in {
   imports =
     [ # Include the results of the hardware scan.
       ../../modules/common/configuration.nix
-      ../../modules/nix/cache-client.nix
-      ../../modules/nix/remote-builder-client.nix
+      ../../modules/nix-cache/client.nix
+      ../../modules/remote-builder-client.nix
+      ../../modules/disko/proxmox.nix
+      ../../modules/boot/efi.nix
     ];
 
   # Bootloader.

hosts/nixos/home.nix

@@ -3,7 +3,7 @@
 {
 
     imports = [
-    ../../common/aliases.nix
+    ../../modules/common/aliases.nix
   ];
 
   home.username = "nixos";         # your actual username

hosts/pxe-boot/configuration.nix

@@ -94,9 +94,10 @@ in
   imports =
     [
       ../../modules/common/configuration.nix
-      ../../modules/nix/cache-client.nix
-      ../../modules/nix/remote-builder-client.nix
+      ../../modules/nix-cache/client.nix
+      ../../modules/remote-builder-client.nix
       ../../modules/disko/proxmox.nix
+      ../../modules/boot/efi.nix
     ];
 
   networking.hostName = "pxe-boot";

hosts/server/configuration.nix

@@ -13,6 +13,8 @@
       ../../modules/services/enable-rpcbind.nix
       ../../modules/services/zfs/enable-service.nix
 #      ../../modules/services/zfs/auto-mount-volumes.nix
+      ../../modules/disko/proxmox.nix
+      ../../modules/boot/efi.nix
     ];
 
     

modules/common/configuration.nix

@@ -7,7 +7,7 @@
       ../set-locale.nix
     ];
   # Use the GRUB 2 boot loader.
-  boot.loader.grub.enable = true;
+  # boot.loader.grub.enable = true;
   #boot.loader.grub.device = "/dev/sda"; # or "nodev" for efi only
 
   networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.