refactor(tailscale): rename exit-node to subnet-router; drop --advertise-exit-node

The host was always intended as a LAN subnet router (--advertise-routes),
not a full exit node (--advertise-exit-node). Rename every trace of
"exit-node" to "subnet-router" and remove the --advertise-exit-node flag
from extraSetFlags; the operator supplies --advertise-routes at first
tailscale up and Tailscale persists it in state across reboots.

Routing sysctls (useRoutingFeatures = "server"), openFirewall, and
trustedInterfaces = ["tailscale0"] are still required for subnet routing
to work, so the module is kept — just correctly named.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TF2dsuKZAiyZWQ1D7CuHJm

.gitea/workflows/check-nixos.yml

@@ -13,9 +13,17 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
 
       - name: Install Nix
         uses: DeterminateSystems/nix-installer-action@v19
 
-      - name: Run maintenance checks (secrets, fmt, lint, eval)
+      # Scoped to files changed since the PR base / previous push -- see
+      # scripts/codex-maintenance.sh. CI never passes --full-check: that
+      # full sweep is for local/manual use, since it's slow enough to time
+      # out this runner.
+      - name: Run maintenance checks (secrets, fmt, lint, eval -- changed files only)
+        env:
+          MAINT_BASE_SHA: ${{ github.event.pull_request.base.sha || github.event.before }}
         run: bash scripts/codex-maintenance.sh

.github/workflows/check-nixos.yml

@@ -13,9 +13,17 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
 
       - name: Install Nix
         uses: DeterminateSystems/nix-installer-action@v19
 
-      - name: Run maintenance checks (secrets, fmt, lint, eval)
+      # Scoped to files changed since the PR base / previous push -- see
+      # scripts/codex-maintenance.sh. CI never passes --full-check: that
+      # full sweep is for local/manual use, since it's slow enough to time
+      # out this runner.
+      - name: Run maintenance checks (secrets, fmt, lint, eval -- changed files only)
+        env:
+          MAINT_BASE_SHA: ${{ github.event.pull_request.base.sha || github.event.before }}
         run: bash scripts/codex-maintenance.sh

.sops.yaml

@@ -1,12 +1,32 @@
 keys:
-  - &admin age10nd382a9klsn2mrs60emdtsxe43pht3a0m9p29phfrhy0wfyt3vsq9r667
+  - &admin age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad
   - &docker age19gfn2yedg76dmztm4hncr7vf3r3c9j0qpt4rap7y7gersjk4m3ks2lhd0e
   - &server age1ll6hj5ggruetgjwjfnplpn5xtq35uhlcdflksx3xmnjm6s3uad9sz70jkf
   - &nix-cache age120le4a5l8dh3lyfgvmj3d9ksmej6ajs5mer5y7r0vfg3x9fn69dqf8xgzu
-  - &lxc-minimal age1qz9d4ka4xgexujyd247s7lp737sulp5fhxl5d65fj2ykvc4j4edqrsdks8
   - &nix-minimal age120whqj96g26lsgy4udvgsn8dc9lumh8jeu3a564fx79rjr5lxffqmrljuu
-  - &lxc-nix-cache age164px2a8e48ptsf9ngtan38aa6jls4jdl26mzrgzf6sn3vcvt49hqjrgr8w
   - &proxmox-minimal age10at8862478urh0eeuwh8hzln6ck78jgwtztgxatwqlzwagg77y5snm4xzg
+  - &lxc-nix-cache age1xjst4frdh0th6q8m7p7u9g5af7ty5jqeum0p6z8a52a9q7st7ewqw8yl9j
+  - &lxc-docker age1ezk9x53zt8kcnscdm80jcyf0xq97vndv7jsn3rl8cc0cwm2jmpmq372dzs
+  - &lxc-minimal age1jy444f9d9stygj4p3w9kh54cqcfr654tvr75tdvee5cxsgtdtc9q3v60ep
+  - &lxc-pxe-boot age1fxxzpnfse8nd9wz78ht3m0plrmraacf4cpga0pe8fm2tdnqcgy8q7qsyvp
+  - &lxc-gui age190htw7prp4vln076dxjx3gxxaq06h0zl0te7cqgpx79vl3lhkaes8suy05
+  - &proxmox-server age1ukpqxzl44mnjpy5r96sfuc5sqzm47u4k8ujjh5qdgy6jvl9uqgpspymqfk
+  - &vm-server age15kh7akxlx7zn00tey79rq2g8lgs4j5y77rcnyfxrxap8ckfu0a9sqvtdhh
+  - &baremetal-gui age1ehkswwz2pqaz4svzh7ela5tdnssl8kn6d4vwwxd6zwg8exfpd43syyrrjp
+  - &lxc-tor-relay age1vvev5m3shgckl62awa64rtug3lyact7jgxehkuu3vn3wpzulhans75w65s
+  - &linode-docker age1eu65wsmez68gegnufl0gqrs0e6w2409mypjlajlq383d7l2e3pjqy5kn6v
+  - &linode-gui age17pwyghxr6lq06fw46gwqzhc9ut4paz28rpwx5pmv3cxwak6rgyjsw7lk3w
+  - &linode-minimal age1jukmg69cqxnjd0lp5f534jhqe65rxew2hufcmyjxa3rkw6ayef6s2ylcmy
+  - &linode-nix-cache age1tzsrtwd3p3lrr9g7nv3z5nvmzsz54t2uc6tfqwutp6usmav83s2sck25cc
+  - &linode-server age1rf4kj99wuq59k7w8ar326djmgmpl9hcwlnuag07f8gauq8c3y5mqne87s4
+  - &linode-tailscale-exit-node age1d0zhx7u3mfs3nktl67npey87cze4dwsfvfvgaje4rh3gwv500yssckcf6u
+  - &lxc-server age1jc6wx33hdhgwhk6nzy5rr8fkgmqxk9um639tk5h632nqfyaw8czskdptj9
+  - &lxc-tailscale-exit-node age1pgykvq4pmxhhjrqupcp99fyad2uht40pt79dkzg66cfvsjy5apjqls8u68
+  - &proxmox-docker age19ht95nv8uhz2shjmakeut8mc3l5spvrcxs3thhe85an7u02r6sysyv457n
+  - &proxmox-gui age1mhaze5tgvc9lwjpml6dnp3xc292337wgm6376yh6tq4fn492ndjq9h23dq
+  - &proxmox-nix-cache age15me6sx0f8r58xh9v7aqrj6e99n7eu555jkpw422txpkqt4r02v0qpahlyq
+  - &proxmox-pxe-boot age1q3hu6eh3mt4saey7dc3yu04s7knnk2ygpm9xt6mg6rqtem6l0uyq4wzul5
+  - &proxmox-tailscale-exit-node age1tczst3x7thwtcz4vce4rg6kmlsszzm6j45kn2nv860z9wa93a92s05ppmc
 
 creation_rules:
   # Shared across every currently-deployed host: root/nixos password hash,
@@ -24,6 +44,26 @@ creation_rules:
           - *nix-minimal
           - *lxc-nix-cache
           - *proxmox-minimal
+          - *lxc-docker
+          - *lxc-pxe-boot
+          - *lxc-gui
+          - *proxmox-server
+          - *vm-server
+          - *baremetal-gui
+          - *lxc-tor-relay
+          - *linode-docker
+          - *linode-gui
+          - *linode-minimal
+          - *linode-nix-cache
+          - *linode-server
+          - *linode-tailscale-exit-node
+          - *lxc-server
+          - *lxc-tailscale-exit-node
+          - *proxmox-docker
+          - *proxmox-gui
+          - *proxmox-nix-cache
+          - *proxmox-pxe-boot
+          - *proxmox-tailscale-exit-node
 
   - path_regex: secrets/nix-cache\.yaml$
     key_groups:
@@ -31,15 +71,36 @@ creation_rules:
           - *admin
           - *nix-cache
           - *lxc-nix-cache
+          - *linode-nix-cache
+          - *proxmox-nix-cache
 
   - path_regex: secrets/server\.yaml$
     key_groups:
       - age:
           - *admin
           - *server
+          - *proxmox-server
+          - *vm-server
+          - *linode-server
+          - *lxc-server
 
   - path_regex: secrets/docker\.yaml$
     key_groups:
       - age:
           - *admin
           - *docker
+
+  # gui-host-specific secrets (currently: wifi-password, see
+  # modules/networking/wifi.nix). Only *lxc-gui has a registered key today
+  # -- proxmox-gui/linode-gui/baremetal-gui haven't been provisioned via
+  # scripts/secrets/sync-host-keys.sh yet, so whichever variant is actually
+  # deployed next needs its recipient added here (and `sops updatekeys` rerun)
+  # before it can decrypt this.
+  - path_regex: secrets/gui\.yaml$
+    key_groups:
+      - age:
+          - *admin
+          - *lxc-gui
+          - *baremetal-gui
+          - *linode-gui
+          - *proxmox-gui

AGENTS.md

@@ -7,7 +7,7 @@ servers and workstation.
 
 The flake exposes NixOS configurations named `<platform>-<buildtype>`
 (platforms: `linode`, `proxmox`, `lxc`; build types: `minimal`, `nix-cache`,
-`server`, `docker`, `gui`, `pxe-boot`), generated from `modules/platforms/*`
+`server`, `docker`, `gui`, `pxe-boot`, `tailscale-exit-node`, `tor-relay`), generated from `modules/platforms/*`
 and `modules/build-types/*` by the `mkTarget` function in `flake.nix`. Not
 every combination is built — `pxe-boot` has no `linode` variant. See
 `README.md` for the full current target list; treat `flake.nix` as the
@@ -35,9 +35,14 @@ Use these commands when validating changes:
 ```bash
 bash scripts/codex-setup.sh
 bash scripts/codex-maintenance.sh
-bash scripts/codex-maintenance.sh dry-run
 ```
 
+With no flags, `codex-maintenance.sh` scopes fmt-check/statix/eval to files
+changed against a base ref — this is what CI runs on every push/PR. For the
+full sweep (every host, every package — slow; CI never runs this), use
+`bash scripts/codex-maintenance.sh --full-check` (add `--dry-run` for build
+planning on top of whichever scope is active).
+
 Host evaluation is safe when limited to drvPath checks:
 
 ```bash

AUDIT_REPORT.md

@@ -0,0 +1,150 @@
+# Flake End-to-End Audit Report
+
+**Date:** 2026-07-21
+**Scope:** Full static lint/eval sweep + live build/deploy/interrogate/destroy testing of every `lxc-*` and `proxmox-*` flake target against `pve.sweet.home`, plus an audit of the operator's ability to manage the flake/secrets tooling.
+**Branch:** `worktree-flake-e2e-audit` (this session's isolated worktree)
+
+## Executive Summary
+
+The flake itself is in good shape: `nixpkgs-fmt`, `statix`, and a full eval + dry-run build of every host and package are all clean. Every `lxc-*`/`proxmox-*` target's NixOS configuration builds successfully — no target has a broken derivation graph.
+
+The issues found are **operational, not code-level**:
+
+1. **pve.sweet.home is critically low on disk space** (91-95% full during this session) and cannot currently build the two largest closures (`gui`, `pxe-boot`) to completion — this actively blocks deploying/redeploying those hosts via the documented workflow.
+2. **A real, reproducible secrets-decryption failure** was caught live: a stale cached container image (built before a same-day sops-key fix) boots with sshd never starting and every secret failing to decrypt. This is a **general hazard in `create-proxmox-resource.sh`'s "reuse the cached image if present" default**, not a one-off.
+3. **sops key/anchor drift**: `proxmox-minimal` has a `.sops.yaml` recipient anchor with no corresponding private key anywhere in this environment; several `lxc-*`/`proxmox-*` targets have no sops registration at all yet.
+4. One concrete script bug was found and **fixed in this session**: `create-proxmox-resource.sh` never enabled the QEMU guest agent channel on VMs it creates, despite the guest OS already running it.
+5. A management-surface audit (of the operator's ability to run this repo day to day) found 5 process gaps, detailed below.
+
+Nothing here required or received a `nixos-rebuild switch/boot/test`, `nixos-install`, or any disk-formatting command — all validation was `nix build`/`nix eval`, plus disposable `pct`/`qm` create-then-destroy cycles via the repo's own `create-proxmox-resource.sh`.
+
+---
+
+## 1. Static Analysis Results — all clean
+
+`bash scripts/codex-maintenance.sh --full-check --dry-run` (whole-tree sweep, not just changed files):
+
+| Check | Result |
+|---|---|
+| Secret grep | Clean — only the documented exceptions (installer's own hashed passwords, `access-tokens` comment references) |
+| `nixpkgs-fmt --check` | 0/53 files would be reformatted |
+| `statix` | No lint warnings |
+| nix-cache host key drift check | Up to date |
+| Full eval of every host's `system.build.toplevel` | All 19 `nixosConfigurations` targets evaluate cleanly |
+| Dry-run build of every host + package | All succeed, no derivation errors |
+
+No drift, no formatting issues, no lint findings anywhere in the tree.
+
+---
+
+## 2. Per-Target Test Results
+
+Legend: **LIVE** = built on pve, `pct`/`qm` create → interrogated → destroyed. **BUILD-ONLY** = `nix build` validated the config (mostly `.config.system.build.toplevel`, occasionally `.tarball`), no resource created on pve.
+
+| Target | Test type | Result | Notes |
+|---|---|---|---|
+| `lxc-docker` | BUILD-ONLY | ✅ PASS | Live redeploy skipped — CT105 is already running this identity in production; `--allow-duplicate-host` would have destroyed it. |
+| `lxc-minimal` | **LIVE** | ✅ PASS (after retry) | First attempt reused a stale cached tarball predating a same-day sops-key commit → activation failed, sshd never started (see Finding #2). Redeployed with `--force-rebuild`: clean boot, `systemctl is-system-running` = `running`, secrets decrypted, sshd listening, users correct. |
+| `lxc-nix-cache` | BUILD-ONLY | ✅ PASS (after retry) | Live redeploy skipped — CT101 is already running this identity. First local build attempt appeared to hang on a remote-builder handoff to nix-cache; killed and retried with `--builders ""` (local-only), succeeded. |
+| `lxc-gui` | **LIVE (attempted)** | ⚠️ BLOCKED by pve disk space | Registered a fresh sops key (no prior registration existed), built successfully through the full NixOS system closure, then **failed packaging the tarball**: `No space left on device` on pve's root filesystem. Not a flake defect. |
+| `lxc-pxe-boot` | **LIVE (attempted)** | ⚠️ BLOCKED by pve disk space | Same failure as `lxc-gui` — this target additionally builds a full nested installer/netboot image (`stage-installer-artifacts.nix`), making it similarly large. Failed with the same `No space left on device` error, immediately after the gui attempt had already consumed pve's remaining headroom. |
+| `lxc-server` | BUILD-ONLY | ✅ PASS | No sops key registered yet; live deploy also would have hit `boot.zfs.extraPools` trying to import a real ZFS pool that doesn't exist in an isolated test container — an expected limitation of testing this build type outside its real hardware, not a bug. |
+| `lxc-tailscale-exit-node` | BUILD-ONLY | ✅ PASS | No sops key registered yet. |
+| `lxc-tor-relay` | BUILD-ONLY | ✅ PASS | Live redeploy skipped — CT106 already holds this identity in production. |
+| `proxmox-docker` | BUILD-ONLY | ✅ PASS (after retry) | Live redeploy skipped — both CT105 *and* VM103 already hold `docker` identities. Combined `toplevel` + `diskoImagesScript` build crashed with a **Nix-internal assertion failure** (`worker.cc:360`) under this session's memory pressure (see Finding #6) — not a flake bug. Retried with `toplevel` alone: clean. |
+| `proxmox-minimal` | **LIVE (attempted)** | ⚠️ BLOCKED by key drift → BUILD-ONLY | `.sops.yaml` has a registered `&proxmox-minimal` anchor but **no corresponding private key exists anywhere in this environment** — the script correctly refused to generate a mismatched replacement. Fell back to `toplevel` build: ✅ PASS. |
+| `proxmox-nix-cache` | BUILD-ONLY | ✅ PASS | No sops key registered yet. |
+| `proxmox-gui` | BUILD-ONLY | ⚠️ Killed after ~40min (resource-limited) | This session's local build machine has only 2GB RAM; swap filled completely (2.0/2.0GB) and the build stalled, so it was killed rather than risk destabilizing the session further. **Not a flake defect** — the equivalent `gui` NixOS configuration already proved fully buildable during the `lxc-gui` live attempt above (it built the entire system closure successfully and only failed at the pve-side tarball-packaging step due to disk space, not the config). |
+| `proxmox-pxe-boot` | BUILD-ONLY | ⚠️ Killed after ~35min (resource-limited) | Was deep into building the nested installer's kernel initrd (this build type bundles a full netboot installer image via `stage-installer-artifacts.nix`) when killed to keep the audit moving. **Not a flake defect** — this target's own module logic was already effectively validated via the earlier *live* pve deploy attempt (`lxc-pxe-boot` above), which built the complete image and only failed at the final tarball-packaging step due to pve's disk space (Finding 1). |
+| `proxmox-server` | BUILD-ONLY | ✅ PASS | No sops key registered yet; same ZFS-pool caveat as `lxc-server` would apply to a live deploy. |
+| `proxmox-tailscale-exit-node` | BUILD-ONLY | ✅ PASS | No sops key registered yet. |
+
+**Not tested at all:** `linode-*` targets (not deployable to Proxmox) and `installer` (not a normal host) — both were still covered by the static eval/dry-run-build sweep above.
+
+---
+
+## 3. Findings, Ranked by Severity
+
+### Finding 1 — pve.sweet.home is critically low on disk space (blocks real deployments)
+
+At session start: `/dev/mapper/pve-root` was **95% full, 5.3GB free** (of 94GB). After two failed large builds it recovered slightly to **91% full, 8.2GB free** (nix cleans up its own failed-build scratch space). `/nix/store` alone is 26GB; `nix-store --gc --print-dead` reports **zero** reclaimable garbage — everything currently in the store is a live GC root, so `nix-collect-garbage` won't help without first removing old roots.
+
+**Why it matters:** `create-proxmox-resource.sh` builds every VM/CT image **directly on pve**, not on a build machine and transferred over. With <10GB headroom, any closure approaching a few GB (the `gui` build type: full Cinnamon desktop + Firefox + LibreOffice + GIMP + VS Code + xrdp; the `pxe-boot` build type: nginx/atftpd *plus* an entire nested installer/netboot image) cannot currently be built there at all. Both `lxc-gui` and `lxc-pxe-boot` failed live with `No space left on device` during this audit.
+
+**Recommended action:** Expand `pve-root`'s LV, or free space by pruning old container templates in `/var/lib/vz/template/cache` (1.5GB) / old backups in `/var/lib/vz/dump` (306MB) / auditing what's pinning 26GB of `/nix/store` as live GC roots (likely `result-*` symlinks — see below). This is real production disk state; **not something this session touched or fixed** — it needs the operator's judgment on what's safe to remove.
+
+**Secondary, smaller finding:** every `create-proxmox-resource.sh` run leaves a `result-<target>` symlink in the node's repo checkout as a permanent GC root (`ls /root/nixos/result-*` on pve showed 3 from this session alone: `lxc-docker`, `lxc-minimal`, `lxc-nix-cache`). These accumulate forever and pin their entire closures in the store. Consider having the script clean up its own `result-*` link after staging the built artifact (or use a temp `--out-link` under `/tmp`), so `nix-collect-garbage` can actually reclaim old build outputs.
+
+### Finding 2 — Stale cached images can silently ship broken secrets (reproduced live)
+
+`create-proxmox-resource.sh`'s default behavior is: if the node already has `<target>.tar.xz`/`.raw` staged, **reuse it** — only `--force-rebuild` forces a fresh build. This session hit exactly the failure mode `docs/auto-installer.md` already warns about: `lxc-minimal`'s cached tarball (built 2026-07-20T15:57Z) predated a same-day sops-key fix commit (2026-07-20T17:49Z, "clean up in ailse 3"). The deployed container booted with:
+
+```
+sops-install-secrets: failed to decrypt '.../common.yaml': Error getting data key: 0 successful groups required, got 0
+Activation script snippet 'setupSecrets' failed (1)
+```
+
+— every secret permanently failed to decrypt, `sshd` never started (though the container otherwise looked "running"). This was **not a code bug**: the currently-committed `secrets/common.yaml` decrypts fine for that host's key when checked independently; the *cached artifact on pve* simply reflected an older commit's ciphertext. Redeploying with `--force-rebuild` fixed it immediately.
+
+**Why it matters:** this is silent and easy to trigger by accident — any operator who redeploys a host without remembering `--force-rebuild` after a secrets change gets a container that looks like it started (`pct start` succeeds, `pct status` = running) but is completely inaccessible.
+
+**Recommended action:** Have `create-proxmox-resource.sh` compare the cached image's build timestamp (or embed the source commit hash in the staged filename) against current HEAD, and warn (or refuse without `--force-rebuild`) if they differ — rather than silently trusting presence alone.
+
+### Finding 3 — sops key/anchor drift
+
+Two concrete instances hit live during this session:
+
+- **`proxmox-minimal`**: `.sops.yaml` already has a registered `&proxmox-minimal` age recipient, but this environment's `host-keys/` directory has no corresponding private key file. `sync-host-keys.sh` correctly refused to generate a replacement (it would silently mismatch whatever's already registered/deployed) — but this means **no environment currently has this host's private key**, unless it exists on some other machine that was never backed up here.
+- **`lxc-gui`**, and by the same logic `lxc-server`/`lxc-tailscale-exit-node`/most `proxmox-*` targets, have **no sops registration at all yet** — expected for undeployed hosts per `docs/auto-installer.md`, but this session's live-testing needed to register `lxc-gui`'s key on the fly, which immediately hit **Finding 3b**: registering a key locally does nothing for pve's build until it's pushed to `origin/main` (pve builds via `git pull`, not from this uncommitted worktree). This is exactly gap #4 the management-surface audit (below) already flagged in the abstract — this session hit it concretely.
+
+**Recommended action:** for `proxmox-minimal`, decide whether to regenerate its key (destroying old-key decrypt access, if anything still holds it) or track down wherever the original private key lives and back it up here. For the general pattern, see the management-surface audit's recommendation to pre-flight-check key registration before building.
+
+### Finding 4 — QEMU guest agent never wired up (found and fixed this session)
+
+`modules/common/configuration.nix:44` sets `services.qemuGuest.enable = true` on every host — the guest-side agent daemon is correctly enabled everywhere. But `scripts/proxmox/create-proxmox-resource.sh`'s `qm create` call never passed `--agent 1`, so **Proxmox never created the virtio-serial channel** the agent needs. Every `proxmox-*` VM this script ever created was silently missing `qm guest exec`/IP-address reporting in the Proxmox UI, despite the guest daemon actually running.
+
+**Status: fixed in this session's worktree** (`scripts/proxmox/create-proxmox-resource.sh`, `qm create` now includes `--agent enabled=1`) — see the diff, included in the PR from this session.
+
+### Finding 5 — Orphaned container on pve (CT102)
+
+`pve.sweet.home` has a stopped LXC container, **VMID 102**, with an essentially empty config (`lock: create` and nothing else — no hostname, no rootfs, no network) — the leftover of a `pct create` that started and never finished. It predates this session (not created by any of this audit's activity) and wasn't touched. **Recommend the operator confirm it's abandoned and remove it** (`pct destroy 102 --purge 1`) — left as-is it may be someone's genuine in-progress work, so it wasn't assumed safe to delete autonomously.
+
+### Finding 6 — Nix-internal crash under memory pressure (tooling, not flake)
+
+Building `proxmox-docker`'s `toplevel` and `diskoImagesScript` together crashed with a Nix-internal assertion failure (`Assertion '!awake.empty()' failed ... worker.cc:360`, a known class of bug in Nix's multi-goal build scheduler) while this session's 2GB-RAM build container was under heavy swap pressure (1.8-2.0/2GB swap in use) from a separate concurrent build. Retrying the same target alone (no concurrency) succeeded cleanly. **Not a flake defect** — purely an artifact of this session's constrained build environment; noted for completeness since it looked alarming in isolation.
+
+### Finding 7 — Management-surface audit: 5 operability gaps
+
+A focused audit of "can the operator actually run this repo day to day" (flake, home-manager, sops, related scripts) found:
+
+1. **No documented recovery path if the `&admin` sops age key is lost without a backup.** `scripts/secrets/backup-admin-key.sh` exists and works but is referenced nowhere in `README.md`/`docs/` — no forcing function ensures a backup was ever taken. `rotate-admin-key.sh` requires the *old* key to re-key; there's no bootstrap-from-nothing path documented (the real fallback — deriving an age identity from any still-live host's own SSH key — isn't written down anywhere).
+2. **home-manager has no standalone iteration path.** It's wired only inside `nixosConfigurations` (`flake.nix`) — no `homeConfigurations` output. The fastest real shortcut (`nix build .#nixosConfigurations.<target>.config.home-manager.users.nixos.home.activationPackage`) isn't documented anywhere, so the practical workflow is a full host rebuild to test one HM tweak.
+3. **Gitea's flake-lock-update workflow pushes straight to `main` with no pre-merge validation.** `.gitea/workflows/update-flake-lock.yml` commits and pushes `nix flake update`'s result directly; `codex-maintenance.sh` only runs *after*, on the resulting push — a genuinely broken lockfile bump lands on `main` before anything catches it. (The GitHub-side workflow is safer — PR-based — but has the opposite gap: nothing alerts if the PR sits unmerged.)
+4. **No pre-flight check that a build target has a registered sops key before building it.** `docs/auto-installer.md` documents the failure mode (silent, total secrets-decrypt failure) but nothing in `create-proxmox-resource.sh` refuses to proceed when it's about to build a target with no `.sops.yaml` anchor — it's on the operator to remember. This session's `lxc-gui` test hit close to this exact gap (needed the key added on the fly, mid-session).
+5. **`vars.remoteBuilderAuthorizedKeys` has the same drift risk as `vars.nixCacheHostKey`, but no checker script.** `sync-nix-cache-host-key.sh --check` guards the latter; the former (and `vars.pxeServerIp`/`vars.pbsIp`) has no equivalent — a rotated/revoked client key just silently stops working with no diagnostic pointing back here.
+
+---
+
+## 4. Action Plan (priority order)
+
+1. **Free up disk space on pve.sweet.home** (or expand `pve-root`). Blocking: `lxc-gui`, `proxmox-gui`, `lxc-pxe-boot`, `proxmox-pxe-boot` cannot currently be built/redeployed on this node at all.
+2. **Decide on `proxmox-minimal`'s orphaned sops key**: locate the original private key and back it up here, or accept regenerating it (breaks decrypt access for whoever/whatever currently holds the old one).
+3. **Merge this session's PR** (see below) to get the `--agent 1` fix and `lxc-gui`'s new sops registration onto `main` — required before `lxc-gui` can be live-redeployed with working secrets.
+4. **Add a staleness guard to `create-proxmox-resource.sh`'s cache-reuse path** (Finding 2) — highest-leverage fix, since it silently produces a broken-but-"running" host.
+5. **Add a pre-flight sops-anchor check to `create-proxmox-resource.sh`** (management-surface gap #4) — same root cause class as #4 above, catch it before building instead of at first boot.
+6. Investigate/clean up **CT102** on pve (Finding 5) — confirm abandoned, then remove.
+7. Document `backup-admin-key.sh` in `README.md`'s Security Notes and add the live-host-key bootstrap-recovery procedure to `docs/` (management-surface gap #1).
+8. Add pre-push validation to the Gitea flake-lock-update workflow (management-surface gap #3).
+9. Lower-priority: document the home-manager `activationPackage` shortcut (gap #2); extend `sync-nix-cache-host-key.sh`'s drift-check pattern to `remoteBuilderAuthorizedKeys` (gap #5).
+10. Follow-up session: finish build-validating `proxmox-gui` and `proxmox-pxe-boot` (both killed here after 35-40min on this session's 2GB-RAM machine — not failures, just unfinished) once pve has headroom (item 1) — ideally from a machine with more RAM. `proxmox-server` and `proxmox-tailscale-exit-node` already passed build-only validation in this session, no follow-up needed.
+
+---
+
+## 5. Uncommitted Changes From This Session
+
+This worktree (`worktree-flake-e2e-audit`) currently has:
+
+- `scripts/proxmox/create-proxmox-resource.sh` — the `--agent enabled=1` fix (Finding 4).
+- `.sops.yaml` / `secrets/common.yaml` — `lxc-gui`'s new age key registered as a recipient (generated live during this session's testing).
+
+Per this session's standard workflow, these will be committed, pushed, and opened as a draft PR rather than pushed to `main` directly — merging it is the operator's call, and is also **prerequisite to live-redeploying `lxc-gui` successfully** (its build will keep hitting the sops-staleness failure from Finding 2 on pve until this registration is on `origin/main`).

CLAUDE.md

@@ -31,17 +31,96 @@ machines when deployed.
   the auto-installer (see `docs/auto-installer.md`). Never commit its
   contents; if `git status` ever shows it as trackable, something is wrong.
 
+### Two Proxmox nodes: `pve1.sweet.home` (production) and `pve-test.sweet.home` (sandbox)
+
+There are two SSH-reachable Proxmox nodes on the LAN, both defined in
+`scripts/env.sh` (`PVE1_HOST` / `PVE_TEST_HOST`), individually targetable
+via `scripts/proxmox/create-proxmox-resource.sh --node <host>` or by
+overriding `PROXMOX_HOST`. `PROXMOX_HOST` itself still defaults to
+`PVE1_HOST` (production) — that default, and every other script behavior,
+is unchanged from before `pve-test` existed; the only thing new is that
+`pve-test` can now be reached at all. They are **not interchangeable** —
+one is real production infrastructure, the other exists specifically so
+there's somewhere safe to test. The restriction below is a policy for
+Claude specifically, not a change to the tooling's own default or
+anything the operator needs to opt into.
+
+#### `pve1.sweet.home` (production — off-limits to Claude)
+
+A real, live Proxmox node hosting production VMs/containers — not a
+sandbox, and not Claude's to touch by default.
+
+- **Off-limits at all times unless the operator has given explicit,
+  same-session instructions to act on this specific host.** That
+  authorization is scoped to the task it was given for — don't carry it
+  forward to unrelated later work in the same conversation, and never
+  assume it from a previous session.
+- **Read-only for existing state is always fine, authorization or not.**
+  You may SSH in (or use `pvesm`, `qm list`, `pct list`, `qm config`, `pct
+  config`, the Proxmox API, etc.) to inspect the node's config, storage,
+  and any existing VM/container — including ones this repo didn't create.
+- **Never** modify, stop, restart, delete, reconfigure, or create anything
+  on this node (`qm set`, `pct set`, `qm destroy`, `pct destroy`, `qm
+  stop`, `pct stop`, `qm create`, `pct create`, snapshot operations,
+  storage changes, etc.) — including scratch/test resources — without
+  that explicit go-ahead. Use `pve-test.sweet.home` for anything
+  exploratory instead; it exists precisely so `pve1` never has to be the
+  answer to "where do I test this."
+- **This is a Claude-specific policy, not something the scripts enforce.**
+  `scripts/env.sh`/`create-proxmox-resource.sh` default to `pve1` exactly
+  as they did before `pve-test` existed, with no extra flag or prompt
+  required — that's deliberate, so the operator's own existing workflows
+  don't change. Claude, however, must never rely on that default: every
+  Proxmox action Claude takes on its own initiative — not explicitly
+  pointed at `pve1` by the operator this session — targets `pve-test`
+  instead (e.g. `--node "$PVE_TEST_HOST"`, or `PROXMOX_HOST=$PVE_TEST_HOST`).
+  Claude's own default is `pve-test`, full stop, regardless of what the
+  tooling's own unqualified default happens to be.
+
+#### `pve-test.sweet.home` (sandbox — Claude's default target)
+
+A separate Proxmox node set aside for testing. The *tooling's* default is
+still production (`PROXMOX_HOST` → `PVE1_HOST`, see above) — but
+**Claude's own default is this node**: absent an explicit, same-session
+instruction to use `pve1`, every Proxmox action Claude initiates targets
+`pve-test`. Once targeted, it's safe to create, interrogate, and destroy
+resources on without asking first.
+
+- **Test VMs/containers are allowed, but must be torn down.** Create a
+  scratch VM or container here (e.g. via
+  `scripts/proxmox/create-proxmox-resource.sh` or raw `qm`/`pct create`)
+  to validate something. Anything created this way must be destroyed
+  again in the same session, before ending the task — never leave a test
+  resource running. Use a VMID/name that's obviously scratch (and doesn't
+  collide with a real flake target) so it's unambiguous what's safe to
+  remove.
+- **Node-level config is still not yours to change.** Creating/destroying
+  your own scratch guests is fine; Proxmox host config, storage pools, and
+  networking on `pve-test` itself are still the operator's call to make
+  manually, same as on `pve1`.
+
 ## Commands
 
 ```bash
 # One-time environment bootstrap (installs Nix if missing, prints hosts)
 bash scripts/codex-setup.sh
 
-# Full validation: secret grep, nixpkgs-fmt --check, statix lint, eval all hosts
+# Changed-files-only validation: secret grep (whole repo), nixpkgs-fmt --check
+# and statix on changed *.nix files, eval of the hosts/packages those changes
+# can affect. This is what CI runs on every push/PR.
 bash scripts/codex-maintenance.sh
 
-# Same, plus a dry-run build (no result symlink) of every host's toplevel
-bash scripts/codex-maintenance.sh dry-run
+# Full sweep: nixpkgs-fmt --check/statix over the whole tree, eval every host
+# and package. Slow (minutes) -- CI never runs this; use it locally before a
+# release or after touching modules/common/*, flake.nix, or variables.nix for
+# extra confidence beyond the automatic full-fallback those paths already
+# trigger in the default mode (see below).
+bash scripts/codex-maintenance.sh --full-check
+
+# Either mode, plus a dry-run build (no result symlink) of every host/package
+# in whichever scope is active
+bash scripts/codex-maintenance.sh --dry-run
+bash scripts/codex-maintenance.sh --full-check --dry-run
 
 # List the hosts the flake currently exposes
 nix eval --json .#nixosConfigurations --apply builtins.attrNames | jq -r '.[]'
@@ -58,35 +137,122 @@ maintenance script pulls them via `nix run github:NixOS/nixpkgs/nixos-25.11#<too
 There is no test suite — "correctness" here means the flake evaluates and
 `nixpkgs-fmt`/`statix` are clean.
 
-**In an interactive agent session**, prefer targeted checks over full-repo
-sweeps: after editing one or two hosts/modules, evaluate just the
-`nixosConfigurations.<host>` you touched (plus any `config.system.build.tarball`
-/`diskoImagesScript`/package output affected) rather than looping over every
-host — `codex-maintenance.sh` evaluates 18 hosts plus every package/tarball/
-image variant now and is slow to run after each small change. Reserve a full
-`codex-maintenance.sh` run for changes that plausibly affect every host
-(`modules/common/*`, `flake.nix`, `variables.nix`) or as a final check before
-committing. This is a session-workflow preference only — it does not apply to
-CI, which should keep running the full script on every push/PR regardless of
-diff size; that's the point of it.
+With no flags, `codex-maintenance.sh` diffs against a base ref (env
+`MAINT_BASE_SHA`, else the PR base SHA in CI, else `HEAD^` locally) and scopes
+fmt-check/statix to the changed `*.nix` files and eval to the hosts/packages
+those changes can affect — a `hosts/<name>/host.nix` edit only evals that
+host's targets, a `modules/platforms/<platform>.nix` edit only evals that
+platform's hosts, and so on. A change to `flake.nix`, `flake.lock`,
+`variables.nix`, `modules/common/*`, or any other `modules/*.nix` file outside
+`platforms/`/`build-types/` (whose blast radius isn't safely inferable from
+the path alone) falls back to evaluating every host and package, same as
+`--full-check` would, just without the whole-tree fmt/statix sweep. This
+exists because the whole-tree sweep is what was timing out CI; **CI always
+runs the plain, no-flag form and never passes `--full-check`.**
+
+The default mode's diff is against the working tree (uncommitted and staged
+edits included, not just committed ones), so it's already the right tool for
+an interactive session too: after editing one or two hosts/modules, plain
+`bash scripts/codex-maintenance.sh` naturally scopes to just what you
+touched. Reserve `--full-check` for changes that plausibly affect every host
+(`modules/common/*`, `flake.nix`, `variables.nix` — though the default mode
+already falls back to evaluating everything for those paths, `--full-check`
+additionally re-checks fmt/statix over the whole tree) or as a final check
+before committing.
 
 ## Scripts
 
-Beyond `codex-setup.sh`/`codex-maintenance.sh` above, `scripts/` also has:
+Beyond `codex-setup.sh`/`codex-maintenance.sh` above, `scripts/` is
+organized by purpose: `scripts/secrets/` (sops/age + SSH host-key
+management), `scripts/proxmox/` (Proxmox deployment), `scripts/installer/`
+(the auto-installer's own shell script, templated into the image — see
+below), `scripts/lib/` (shared helpers, sourced by the scripts below — not
+run directly), and a handful of repo-wide scripts left at the top level
+(`env.sh`, `bump-nixpkgs-release.sh`, plus `codex-setup.sh`/
+`codex-maintenance.sh` above). When adding a new script, put it in the
+matching subfolder rather than the top level, and if it duplicates logic
+another script already has, lift the shared part into `scripts/lib/`
+instead of copying it.
 
-- `scripts/sync-host-keys.sh` — generates/registers SSH host keys and their
-  `.sops.yaml`/`secrets/*.yaml` recipients for flake targets, idempotently
-  (`--all`, `<target>`, `--remove`, `--regenerate-all-keys`, all with
-  `--dry-run`). The primary tool for provisioning a new host's secrets
-  access — see "Creating a new machine" in `docs/auto-installer.md`.
-- `scripts/prepare-host-key.sh` — narrower predecessor: generates a key by
-  an arbitrary name without touching `.sops.yaml`. Still useful to
+### `scripts/installer/`
+
+- `scripts/installer/auto-install.sh` — the interactive install script
+  baked into the auto-installer image (see `docs/auto-installer.md`), kept
+  as a real, version-controlled shell file rather than inline in
+  `modules/installer/common.nix`'s Nix. It sources `scripts/env.sh` itself
+  for `LAN_DOMAIN` (`export LAN_DOMAIN`/`: "${LAN_DOMAIN:=...}"`, matching
+  `variables.nix`'s `lanDomain` — manually kept in sync, same pattern as
+  `NIX_CACHE_HOST` mirroring `nixCacheHost`), rather than Nix-level string
+  substitution — that's what makes it work identically whether run
+  straight from a git checkout or from inside the built installer image.
+  `common.nix` bakes `scripts/env.sh` in alongside it at a matching
+  relative path (`/etc/nixos-installer/env.sh` next to
+  `/etc/nixos-installer/installer/auto-install.sh`) so the script's own
+  `source "$(dirname ...)/../env.sh"` line resolves the same way in both
+  contexts — this is also why it's invoked from
+  `/etc/nixos-installer/installer/auto-install.sh` rather than a flat
+  `/etc/auto-install.sh`. `#!/usr/bin/env bash`, not
+  `#!/run/current-system/sw/bin/bash`: the latter only resolves on an
+  already-activated NixOS system, breaking the checked-out-file case
+  entirely (confirmed live: "cannot execute: required file not found" on
+  a non-NixOS box); `/usr/bin/env` is reliably present on both NixOS
+  (`environment.usrbinenv`'s own default) and any normal Linux distro.
+
+### `scripts/secrets/`
+
+- `scripts/secrets/sync-host-keys.sh` — generates/registers SSH host keys
+  and their `.sops.yaml`/`secrets/*.yaml` recipients for flake targets,
+  idempotently (`--all`, `<target>`, `--remove`, `--regenerate-all-keys`,
+  all with `--dry-run`). The primary tool for provisioning a new host's
+  secrets access — see "Creating a new machine" in `docs/auto-installer.md`.
+- `scripts/secrets/prepare-host-key.sh` — narrower predecessor: generates a
+  key by an arbitrary name without touching `.sops.yaml`. Still useful to
   pre-generate a key before its flake target exists yet, since
   `sync-host-keys.sh` can only act on targets `nixosConfigurations` already
   has.
-- `scripts/create-proxmox-resource.sh` — builds a `lxc-*`/`proxmox-*`
-  target's tarball/disk image and creates it on a real Proxmox node
-  (`pct create` against the tarball as a CT template / `qm create`+
+- `scripts/secrets/rotate-admin-key.sh <backup-admin-key> [--new-key-file
+  <path>] [--dry-run]` — rotates `.sops.yaml`'s `&admin` age key: decrypts
+  with a backed-up copy of the key currently trusted as `&admin` (verified
+  by deriving its public key and comparing, not taken on faith), replaces
+  the `&admin` line with a new key already present in the environment
+  (defaults to wherever sops/age itself would look), and runs
+  `sops updatekeys` on every `secrets/*.yaml`. One-way: the old key can no
+  longer decrypt anything re-encrypted this way. This is the automation
+  for the manual steps `sync-host-keys.sh`/`create-proxmox-resource.sh`
+  print when they bootstrap a brand-new, not-yet-trusted key on a machine
+  with no prior admin access.
+- `scripts/secrets/backup-admin-key.sh <dest-path> [--key-file <path>]
+  [--force] [--dry-run]` — copies the local sops age key (source
+  resolution matches sops/age itself: `$SOPS_AGE_KEY` inline, then
+  `--key-file`, then `$SOPS_AGE_KEY_FILE`, then the XDG default) to an
+  arbitrary destination path with `0600` permissions, validating it's a
+  real age identity and round-tripping the public key before and after the
+  write. Refuses to overwrite an existing `<dest-path>` without `--force`.
+  Purely a local filesystem copy — never touches `.sops.yaml`/
+  `secrets/*.yaml` or the repo at all. The resulting file is exactly what
+  `rotate-admin-key.sh` expects as its backup-key argument.
+- `scripts/secrets/sync-nix-cache-host-key.sh [--check] [--dry-run]
+  [--host <name>]` — detects drift between the ed25519 SSH host key
+  nix-cache is actually serving right now (via `ssh-keyscan`) and
+  `vars.nixCacheHostKey` (`variables.nix`), the value
+  `modules/nix-cache/remote-builder-client.nix` bakes into every real
+  client's declarative `programs.ssh.knownHosts` and
+  `configure-nix-cache-client.sh` hardcodes as its own default for
+  non-NixOS clients. That value has no automatic source of truth — it's
+  set once from whatever nix-cache's host key happened to be at the time,
+  and silently goes stale if the host is ever rebuilt/recreated with a new
+  key, breaking every client's distributed-build SSH trust with no error
+  that points back here. `--check` (used by `codex-maintenance.sh`, which
+  treats an unreachable nix-cache — e.g. from a non-LAN CI runner — as a
+  silent skip rather than a failure) only reports drift; the no-flags form
+  updates both files in place. Declarative clients still need a rebuild to
+  pick up the fix.
+
+### `scripts/proxmox/`
+
+- `scripts/proxmox/create-proxmox-resource.sh` — builds a `lxc-*`/
+  `proxmox-*` target's tarball/disk image and creates it on a real Proxmox
+  node (`pct create` against the tarball as a CT template / `qm create`+
   `importdisk`), or reconfigures an existing resource's cores/memory/disk
   size (`--modify`, always requires typing the VMID back to confirm).
   Checks for an already-uploaded image on the node before building
@@ -96,22 +262,71 @@ Beyond `codex-setup.sh`/`codex-maintenance.sh` above, `scripts/` also has:
   Refuses to create a target whose host identity already exists live on
   the node (checked directly via `qm`/`pct`, not any file in this repo)
   unless `--allow-duplicate-host` is passed. `--dry-run` throughout both
-  modes.
+  modes. The first time it has to bootstrap build tooling on a node (i.e.
+  `nix` wasn't already on its `PATH`), it also runs
+  `scripts/proxmox/configure-nix-cache-client.sh` there (non-fatally — a
+  failure just falls back to building from source / `cache.nixos.org`) so
+  the node substitutes from and can offload builds to nix-cache on every
+  subsequent run, not just this one.
+- `scripts/proxmox/configure-nix-cache-client.sh [--dry-run]
+  [--no-remote-builder] [--no-restart]` — the non-NixOS equivalent of
+  `modules/nix-cache/client.nix`/`remote-builder-client.nix`, for a plain
+  Debian machine with the Nix package manager (not NixOS) already
+  installed: run as root *on that machine* to add nix-cache as a
+  substituter in `/etc/nix/nix.conf` (`https://cache.nixos.org/` kept as
+  fallback) via `extra-substituters`/`extra-trusted-public-keys` so it
+  layers on top of whatever's already there instead of clobbering it, and,
+  if `/root/.ssh/nixremote` is already present (see docs/nix-cache.md
+  "Remote builder SSH keys"), configures it as a distributed-build
+  machine too and trusts nix-cache's SSH host key in
+  `/etc/ssh/ssh_known_hosts`. Idempotent (re-running replaces its own
+  marked block rather than duplicating it); restarts `nix-daemon` by
+  default so the change takes effect immediately.
+
+### `scripts/lib/`
+
+Sourced by the scripts above, never run directly:
+
+- `nix-bootstrap.sh` — `NIX_CONFIG`/`ensure_nix_profile`, shared by
+  `codex-setup.sh`/`codex-maintenance.sh` and the remote build commands
+  `create-proxmox-resource.sh` runs over SSH.
+- `nix-eval.sh` — `NIX_EVAL_FLAGS` plus `list_flake_targets`/
+  `flake_target_hostname` flake-introspection helpers.
+- `ssh-host-keys.sh` — `generate_host_ed25519_key`/`ssh_pubkey_to_age`,
+  shared by `sync-host-keys.sh` and `prepare-host-key.sh`.
+- `sops-age.sh` — `age_pubkey_from_identity_file`/`sops_yaml_admin_pubkey`/
+  `sops_updatekeys` plus the shared sops/age default key-file resolution,
+  shared by `backup-admin-key.sh`, `rotate-admin-key.sh`, and
+  `sync-host-keys.sh`.
+- `confirm.sh` — `confirm_typed`, the "type X back to confirm" destructive-
+  action prompt shared by `create-proxmox-resource.sh` and
+  `sync-host-keys.sh`.
+- `sync-host-keys-edit-sops.py` — the `.sops.yaml` anchor/key_groups editor
+  `sync-host-keys.sh` shells out to (see that script for why: precise,
+  idempotent YAML edits are impractical in bash).
+
+### Top level
+
 - `scripts/env.sh` — shared config (`PROXMOX_HOST`, storage pool, bridge,
-  default cores/memory) sourced by `create-proxmox-resource.sh`. Add new
-  cross-script config here instead of duplicating it per-script.
+  default cores/memory, `NIX_CACHE_HOST`, `LAN_DOMAIN`) sourced by
+  `create-proxmox-resource.sh` and `scripts/installer/auto-install.sh`. Add
+  new cross-script config here instead of duplicating it per-script.
 - `scripts/bump-nixpkgs-release.sh` — bumps `flake.nix`'s `nixpkgs.url`/
   `home-manager.url` in place. Exists because flake input URLs can't
   reference `variables.nix` (confirmed empirically — `nix flake metadata`
   errors on it), so this is the closest equivalent to a single source of
   truth for the tracked release.
 
-`sync-host-keys.sh` and `create-proxmox-resource.sh` genuinely mutate real
-state when run for real (not `--dry-run`): real `secrets/*.yaml`
-recipients, real Proxmox VMs/containers. They require the operator's own
-SSH/sops access, which an agent session doesn't have — but don't suggest
-running either non-dry-run without the operator's explicit go-ahead even
-if it becomes technically reachable.
+`sync-host-keys.sh`, `create-proxmox-resource.sh`, and
+`rotate-admin-key.sh` genuinely mutate real state when run for real (not
+`--dry-run`): real `secrets/*.yaml` recipients, real Proxmox VMs/
+containers, real revocation of decrypt access. They require the
+operator's own SSH/sops access, which an agent session doesn't have — but
+don't suggest running any of them non-dry-run without the operator's
+explicit go-ahead even if it becomes technically reachable.
+`backup-admin-key.sh` only writes a key copy to a path the operator gives
+it — lower-stakes than the others, but it still handles a real private
+key, so treat its destination path choice as the operator's call too.
 
 ## Architecture
 
@@ -133,10 +348,14 @@ nixosSystem {
 }
 ```
 
-Platforms: `linode`, `proxmox`, `lxc`. Build types: `minimal`, `nix-cache`,
-`server`, `docker`, `gui`, `pxe-boot`, `tailscale-exit-node`. Not every
-combination is built — e.g. `pxe-boot` has no `linode` variant (PXE/DHCP/TFTP
-need LAN L2 adjacency a Linode VPS doesn't have). Treat `flake.nix`'s
+Platforms: `linode`, `proxmox`, `lxc`, `baremetal`. Build types: `minimal`,
+`nix-cache`, `server`, `docker`, `gui`, `pxe-boot`, `tailscale-exit-node`,
+`tor-relay`. Not every combination is built — e.g. `pxe-boot` has no `linode`
+variant (PXE/DHCP/TFTP need LAN L2 adjacency a Linode VPS doesn't have),
+`tor-relay` currently only exists as `lxc-tor-relay`, and `baremetal`
+currently only exists as `baremetal-gui` (the real gui-host hardware —
+see `hosts/nixos/host.nix` and `modules/platforms/baremetal.nix`). Treat
+`flake.nix`'s
 `generatedTargets` as the source
 of truth for which hosts exist — `README.md`, `AGENTS.md`,
 `docs/flake-lock-automation.md`, and the CI eval workflows
@@ -152,19 +371,23 @@ removing a host.
   of their own beyond narrow parameterized helpers (see
   `modules/beszel/host-token.nix` below) — all shared behavior comes from the
   platform/build-type modules composed in `flake.nix`, not from the host file.
-- `modules/platforms/{linode,proxmox,lxc}.nix` — platform-specific config:
-  boot method, guest tooling, and (for linode/proxmox) the hypervisor-specific
-  hardware config, imported directly by the platform module itself
-  (`../hardware-configuration/vm/{proxmox,linode}.nix`) — **not** wired in
-  from `flake.nix`. `lxc.nix` has no hardware-configuration counterpart since
-  containers share the host kernel; instead it imports nixpkgs' own
+- `modules/platforms/{linode,proxmox,lxc,baremetal}.nix` — platform-specific
+  config: boot method, guest tooling, and the hardware config, imported
+  directly by the platform module itself — **not** wired in from
+  `flake.nix`. VM platforms use `../hardware-configuration/vm/{proxmox,linode}.nix`;
+  `baremetal.nix` uses `../hardware-configuration/baremetal.nix` (adapted
+  from a real `nixos-generate-config` run on the actual hardware, not a
+  vm/ file, since it isn't a VM) plus `hardware.enableRedistributableFirmware
+  = true` for real wifi/GPU/microcode firmware that VMs never needed.
+  `lxc.nix` has no hardware-configuration counterpart since containers
+  share the host kernel; instead it imports nixpkgs' own
   `virtualisation/proxmox-lxc.nix`, which gives every `lxc-*` host a
   `config.system.build.tarball` output — a plain rootfs tarball, used as a
   `pct create ... vztmpl` CT template (**not** `pct restore`, which expects
   `vzdump` backup-archive metadata this doesn't have), no install step —
   see `docs/auto-installer.md`.
 - `modules/build-types/*.nix` — what a system is for:
-  minimal/server/docker/gui/pxe-boot/nix-cache.
+  minimal/server/docker/gui/pxe-boot/nix-cache/tailscale-exit-node/tor-relay.
 - `modules/common/configuration.nix` — base NixOS config imported by every
   host: locale, users, nix settings, git.
 - `modules/common/home.nix` / `hosts/nixos/home.nix` — Home Manager config for
@@ -181,6 +404,16 @@ removing a host.
   boots, so this declares them with `destroy = false` (disko never wipes
   them) and a bare `filesystem`/`swap` content type instead of a partition
   table — idempotent against an already-provisioned disk, never destructive.
+- `modules/disko/baremetal.nix` — `baremetal-gui`'s disko config: a ZFS
+  RAID0 (striped, no redundancy — disko's zpool `mode` defaults to `""`,
+  which is a plain stripe rather than `"mirror"`/`"raidz"`) root pool
+  across two disks, ESP + systemd-boot on the first. Device paths
+  (`vars.guiRootDisk1`/`guiRootDisk2`) are placeholders — fill in stable
+  `/dev/disk/by-id/...` paths before running disko for real.
+  `modules/platforms/baremetal.nix` also imports
+  `modules/services/zfs/enable-service.nix` for this (the `zfs_unstable`
+  package, autoScrub/autoSnapshot/trim) — the only other importer today is
+  `server`'s NFS data pool, an unrelated non-root ZFS use.
 - `modules/boot/efi.nix` — systemd-boot + EFI vars, paired with the disko module.
 - `modules/installer/` — the auto-installer environment (ISO, also served as
   PXE netboot): `common.nix` (shared config + the generated
@@ -199,7 +432,8 @@ removing a host.
   and `environmentFile`; used by `hosts/server/host.nix` and
   `hosts/nix-cache/host.nix` to avoid duplicating that boilerplate.
 - `modules/tailscale/`, `modules/docker/`, `modules/networking/`,
-  `modules/traefik/`, `modules/services/*` — single-purpose, single-host
+  `modules/traefik/`, `modules/tor/`, `modules/services/*` — single-purpose,
+  single-host
   feature modules (e.g. `docker/enable-service.nix`,
   `services/zfs/enable-service.nix`). Grep `modules/build-types/*.nix` for
   each build type's `imports` list to see which modules apply where.

README.md

@@ -8,32 +8,42 @@ workstation.
 Targets are named `<platform>-<buildtype>`, generated from two orthogonal
 pieces composed in `flake.nix`:
 
-- **Platforms** (what it runs on): `linode`, `proxmox`, `lxc`
+- **Platforms** (what it runs on): `linode`, `proxmox`, `lxc`, `baremetal`
 - **Build types** (what it's for): `minimal`, `nix-cache`, `server`, `docker`,
-  `gui`, `pxe-boot`, `tailscale-exit-node`
+  `gui`, `pxe-boot`, `tailscale-exit-node`, `tor-relay`
 
 Not every combination exists — `pxe-boot` has no `linode` variant, since
-PXE/DHCP/TFTP need LAN L2 adjacency that a Linode VPS doesn't have. The full
-list:
+PXE/DHCP/TFTP need LAN L2 adjacency that a Linode VPS doesn't have,
+`tor-relay` currently only exists as `lxc-tor-relay`, and `baremetal`
+currently only exists as `baremetal-gui` (the real gui-host hardware). The
+full list:
 
 | Target | Purpose |
 | --- | --- |
-| `linode-minimal` | Minimal NixOS host profile on a Linode VPS (real, deployed) |
-| `proxmox-minimal` | Minimal NixOS host profile on Proxmox (real, deployed — previously the flat `nix-minimal` target) |
+| `linode-minimal` | Minimal NixOS host profile on a Linode VPS |
+| `proxmox-minimal` | Minimal NixOS host profile on Proxmox — previously the flat `nix-minimal` target |
 | `lxc-minimal` | Minimal NixOS host profile in a Proxmox LXC container |
-| `linode-nix-cache` / `proxmox-nix-cache` / `lxc-nix-cache` | Local Nix binary cache and remote builder (`lxc-nix-cache` is the real, deployed one — previously `proxmox-nix-cache`, itself previously the flat `nix-cache` target) |
-| `linode-server` / `proxmox-server` / `lxc-server` | Storage, NFS, backup, and monitoring exporter host (`proxmox-server` is the real, deployed one — previously the flat `server` target) |
-| `linode-docker` / `proxmox-docker` / `lxc-docker` | Docker host for the main container stack (`proxmox-docker` is the real, deployed one — previously the flat `docker` target) |
-| `linode-gui` / `proxmox-gui` / `lxc-gui` | Cinnamon desktop workstation (`proxmox-gui` is the real, deployed one — previously the flat `nixos` target) |
-| `proxmox-pxe-boot` / `lxc-pxe-boot` | HTTP/iPXE boot asset host (`proxmox-pxe-boot` is the real, deployed one — previously the flat `pxe-boot` target) |
-| `linode-tailscale-exit-node` / `proxmox-tailscale-exit-node` / `lxc-tailscale-exit-node` | Tailscale exit node (no deployed target yet; `lxc-tailscale-exit-node` is the one planned for actual use) |
+| `linode-nix-cache` / `proxmox-nix-cache` / `lxc-nix-cache` | Local Nix binary cache and remote builder — previously the flat `nix-cache` target |
+| `linode-server` / `proxmox-server` / `lxc-server` | Storage, NFS, backup, and monitoring exporter host — previously the flat `server` target |
+| `linode-docker` / `proxmox-docker` / `lxc-docker` | Docker host for the main container stack — previously the flat `docker` target |
+| `linode-gui` / `proxmox-gui` / `lxc-gui` | Cinnamon desktop workstation — previously the flat `nixos` target |
+| `baremetal-gui` | Same Cinnamon desktop workstation, on the real gui-host hardware — ZFS RAID0 root, systemd-boot |
+| `proxmox-pxe-boot` / `lxc-pxe-boot` | HTTP/iPXE boot asset host — previously the flat `pxe-boot` target |
+| `linode-tailscale-exit-node` / `proxmox-tailscale-exit-node` / `lxc-tailscale-exit-node` | Tailscale exit node |
+| `lxc-tor-relay` | Tor middle relay |
 
-This table is the only place "(real, deployed)" status is tracked — there's
-no separate machine-readable copy to keep in sync. `scripts/create-proxmox-resource.sh`
-guards against creating a same-identity duplicate of an already-deployed host
-by checking the Proxmox node itself (live `qm`/`pct` state) rather than any
-file in this repo, since a static list can't track whether a resource still
-actually exists.
+Which variant of a given buildtype is actually deployed isn't tracked
+anywhere in this repo — that's live infrastructure state, not something a
+committed file can keep accurate, and it changes independently of the code.
+Check the Proxmox node itself, or `/etc/flake-target` on a running host (see
+below), if you need to know what's really out there right now.
+`scripts/proxmox/create-proxmox-resource.sh`'s duplicate-host guard works the same
+way: it checks the Proxmox node directly rather than any file here.
+Real, production deployments live on `pve1.sweet.home`; there's a second
+node, `pve-test.sweet.home`, set aside purely for scratch/test resources —
+see `scripts/env.sh` (`PVE1_HOST` / `PVE_TEST_HOST`, and the
+`--node`/`PROXMOX_HOST` targeting they feed into) and CLAUDE.md's Proxmox
+section for which is which.
 
 Each buildtype's `hosts/<name>/host.nix` carries the per-machine identity
 (hostname, hostId, per-machine secrets, `system.stateVersion`) that must stay
@@ -57,7 +67,7 @@ nix eval --json .#nixosConfigurations --apply builtins.attrNames | jq -r '.[]'
 | `variables.nix` | Single source of truth for shared values (LAN domain/CIDR, hostnames, timezone, primary username, storage root, NFS share subpaths/mountpoints, service ports, ...) — passed to every module and Home Manager config as the `vars` argument via `specialArgs`/`extraSpecialArgs` |
 | `hosts/<name>/host.nix` | Per-machine identity: hostname, hostId, per-machine secrets, `system.stateVersion` |
 | `hosts/nixos/home.nix` | Workstation-specific Home Manager config (used by the `gui` build type) |
-| `modules/platforms/` | Platform-specific config: virtualisation guest tools, boot method, hardware config (`linode.nix`, `proxmox.nix`, `lxc.nix`) |
+| `modules/platforms/` | Platform-specific config: virtualisation guest tools, boot method, hardware config (`linode.nix`, `proxmox.nix`, `lxc.nix`, `baremetal.nix`) |
 | `modules/build-types/` | Build-type-specific config: what makes a system minimal/server/docker/gui/pxe-boot/nix-cache |
 | `modules/common/` | Shared NixOS config, Home Manager, aliases imported by every host |
 | `modules/nix-cache/` | Binary cache and remote builder client/server modules |
@@ -72,10 +82,19 @@ Safe validation commands for Codex and local review:
 
 ```bash
 bash scripts/codex-setup.sh
-bash scripts/codex-maintenance.sh dry-run
 bash scripts/codex-maintenance.sh
 ```
 
+`codex-maintenance.sh` with no flags (what CI runs on every push/PR) scopes
+fmt-check/statix/eval to files changed against a base ref — fast, but only
+as thorough as the diff. For the full sweep (every host, every package,
+fmt-check and statix over the whole tree — slow, CI never runs this):
+
+```bash
+bash scripts/codex-maintenance.sh --full-check
+bash scripts/codex-maintenance.sh --full-check --dry-run
+```
+
 For individual host evaluation:
 
 ```bash
@@ -112,10 +131,11 @@ Three different paths depending on target, none of them involving a manual
   disk image and attached to a new VM with no install step — see
   `docs/proxmox-images.md`.
 
-`scripts/create-proxmox-resource.sh --type lxc|vm --host <name>` automates
-either of the last two end to end (build, host-key registration, upload,
-`pct create`/`qm create`), with `--dry-run` and a guard against duplicating
-an already-deployed host's identity. See its `--help`.
+`scripts/proxmox/create-proxmox-resource.sh --type lxc|vm --host <name>` automates
+either of the last two end to end (host-key registration, building the
+image directly on the Proxmox node itself, `pct create`/`qm create`), with
+`--dry-run` and a guard against duplicating an already-deployed host's
+identity. See its `--help`.
 
 ## Security Notes
 

docs/auto-installer.md

@@ -8,10 +8,13 @@ lives here.
 The installer provides a small NixOS install environment (ISO, or the same
 image netbooted via PXE) with SSH access, Git support, and an interactive
 installation script.
-Logging in as any user (root or `nixos`) runs `/etc/auto-install.sh`,
-discovers available hosts from this same flake, lets the operator choose a
-target, applies that host's Disko storage configuration, installs NixOS, and
-reboots.
+Logging in as any user (root or `nixos`) runs
+`/etc/nixos-installer/installer/auto-install.sh` (the same file as
+`scripts/installer/auto-install.sh` in this repo — see "Installer process"
+below for why it's baked in at that path rather than a flat
+`/etc/auto-install.sh`), discovers available hosts from this same flake,
+lets the operator choose a target, applies that host's Disko storage
+configuration, installs NixOS, and reboots.
 
 **This applies to every `nixosConfigurations` target except `lxc-*` hosts —
 see "LXC hosts" immediately below for why those are different.**
@@ -19,7 +22,7 @@ see "LXC hosts" immediately below for why those are different.**
 ## LXC hosts
 
 `lxc-*` targets (`lxc-minimal`, `lxc-nix-cache`, `lxc-server`, `lxc-docker`,
-`lxc-gui`, `lxc-pxe-boot`) are **not** installed via `auto-install.sh` — the
+`lxc-gui`, `lxc-pxe-boot`, `lxc-tailscale-exit-node`, `lxc-tor-relay`) are **not** installed via `auto-install.sh` — the
 interactive menu deliberately excludes them. Don't try to select one there;
 `nixos-install` would bind-mount `/` onto `/mnt` (LXC containers have no raw
 disk to partition) and then refuse to touch the filesystem it's currently
@@ -73,9 +76,9 @@ booting one:
 
 First boot runs `boot.postBootCommands` (registers the Nix store DB and
 system profile) — there's no separate activation step to run yourself.
-`scripts/create-proxmox-resource.sh --type lxc --host <name>` automates all
-of this (build, host-key handling, upload, `pct create` with the flags
-above) — see its `--help`.
+`scripts/proxmox/create-proxmox-resource.sh --type lxc --host <name>` automates all
+of this (host-key handling, building the tarball directly on the Proxmox
+node itself, `pct create` with the flags above) — see its `--help`.
 
 Host keys still need pre-seeding the same way as any other host — the
 sops-nix activation-vs-first-boot race is identical regardless of how the
@@ -102,7 +105,7 @@ groups required, got 0`, and *every* secret (including this host's own
 login) permanently fails to decrypt, silently — no error in the boot log
 at all, since the activation step that would install secrets only runs on
 a from-scratch first activation and skips silently once `/run/current-system`
-already exists. `scripts/create-proxmox-resource.sh` always builds with
+already exists. `scripts/proxmox/create-proxmox-resource.sh` always builds with
 `NIXOS_HOST_KEYS_DIR` set for this reason.
 
 ## Layout
@@ -116,10 +119,10 @@ already exists. `scripts/create-proxmox-resource.sh` always builds with
   `docs/pxe-boot.md`).
 - `modules/installer/host-keys.nix` — optionally bakes pre-generated SSH
   host keys into the image; see "Host keys" below.
-- `scripts/sync-host-keys.sh` — admin-workstation tool that generates,
+- `scripts/secrets/sync-host-keys.sh` — admin-workstation tool that generates,
   registers, and (via `--remove`/`--regenerate-all-keys`) retires host
   keys; see "Creating a New Machine" below.
-- `scripts/prepare-host-key.sh` — narrower predecessor: generates a single
+- `scripts/secrets/prepare-host-key.sh` — narrower predecessor: generates a single
   key by an arbitrary name without touching `.sops.yaml`. Still useful for
   pre-generating a key *before* its flake target exists (`sync-host-keys.sh`
   can only act on targets `nixosConfigurations` already has); otherwise
@@ -150,7 +153,11 @@ use case.
 
 The `pxe` variant is also built automatically as part of the `pxe-boot` host
 itself (`modules/pxe-boot/stage-installer-artifacts.nix`) and served over
-iPXE — see `docs/pxe-boot.md`.
+iPXE as the menu's "NixOS Auto-Installer" entry — see `docs/pxe-boot.md`.
+That same host also builds and serves `packages.x86_64-linux.pxe-minimal`,
+a vanilla NixOS minimal netboot image with none of this auto-installer's
+wiring, as a separate "NixOS Minimal" menu entry — also documented in
+`docs/pxe-boot.md`, not covered further here since it's not this installer.
 
 ## Host keys
 
@@ -188,6 +195,10 @@ default.
 `auto-install.sh` still supports the older manual path as a fallback: if a
 host's key isn't baked in (`/etc/host-keys`), it checks `/root/host-keys`
 next, where you can `scp` a key in after boot, same as before this migration.
+If neither has it and the script is running interactively (an actual
+operator at the other end of stdin, not an unattended run), it prompts for
+an arbitrary directory to check (a mounted USB stick, another filesystem,
+etc.) and copies the key pair into `/root/host-keys` from there if found.
 
 ## Storage
 
@@ -213,7 +224,21 @@ entirely (see "LXC hosts" above), so it never reaches this code path.
 
 ## Installer process
 
-`/etc/auto-install.sh`:
+`scripts/installer/auto-install.sh` is a real, version-controlled shell
+script — not an inline Nix string. It sources `scripts/env.sh` for
+`LAN_DOMAIN` itself (same as every other script in `scripts/`), so it
+behaves identically whether it's run straight from a git checkout (e.g.
+manually, from a stock NixOS ISO that isn't this repo's own installer
+image) or from inside the built installer image. That's also why it's
+baked in at `/etc/nixos-installer/installer/auto-install.sh` rather than a
+flat `/etc/auto-install.sh` — `modules/installer/common.nix` bakes
+`scripts/env.sh` in alongside it at `/etc/nixos-installer/env.sh`,
+preserving the same relative layout (`installer/auto-install.sh` ->
+`../env.sh`) the checked-out repo has, so the script's own
+`source ".../env.sh"` line resolves correctly in both places without any
+Nix-level templating.
+
+Once running, it:
 
 1. Queries `nixosConfigurations` from this flake over the network (`git+https://<lanDomain>/beatzaplenty/nixos.git`) — this happens at *install* time, not build time, so a generic installer image always sees whatever hosts are currently committed, without needing a rebuild.
 2. Presents them as a menu; confirms the choice.
@@ -238,7 +263,7 @@ GitHub token behind sops-nix for all of them).
 2. **On your admin workstation, generate and register its host key:**
 
    ```sh
-   ./scripts/sync-host-keys.sh <flake-target>
+   ./scripts/secrets/sync-host-keys.sh <flake-target>
    ```
 
    This generates `host-keys/<flake-target>_ssh_host_ed25519_key(.pub)`,
@@ -250,7 +275,7 @@ GitHub token behind sops-nix for all of them).
 
    Doing this for every host that needs one at once — after adding several
    new targets, or just to catch up any that were missed — is
-   `./scripts/sync-host-keys.sh --all`. See `scripts/sync-host-keys.sh --help`
+   `./scripts/secrets/sync-host-keys.sh --all`. See `scripts/secrets/sync-host-keys.sh --help`
    for its other modes (`--remove`, `--regenerate-all-keys`).
 
 3. **Commit and push.** The flake build the installer uses has to see the

docs/flake-lock-automation.md

@@ -8,9 +8,14 @@ and to verify that declared NixOS hosts still evaluate after dependency updates.
 - A scheduled workflow runs `nix flake update` once per week.
 - On GitHub, any resulting `flake.lock` change is proposed through a pull request.
 - On Gitea, the workflow can commit and push `flake.lock` directly when PR automation is not configured.
-- A separate CI workflow evaluates every configured host before merge, listed
-  dynamically via `nix eval --json .#nixosConfigurations --apply builtins.attrNames`
-  rather than hand-enumerated, so it can't drift as `<platform>-<buildtype>`
+- A separate CI workflow runs `scripts/codex-maintenance.sh` before merge.
+  Its default mode scopes eval to the hosts/packages a change can affect,
+  determined from a git diff against the PR base — but a `flake.lock` change
+  is treated as repo-wide and always falls back to evaluating every host, so
+  a lock-file update PR still gets full coverage. Hosts are still listed
+  dynamically via
+  `nix eval --json .#nixosConfigurations --apply builtins.attrNames` rather
+  than hand-enumerated, so that fallback can't drift as `<platform>-<buildtype>`
   targets are added or removed. See `README.md` for the current target list.
 
 ## Why hosts should stop using `--upgrade-all`

docs/nix-cache.md

@@ -46,18 +46,26 @@ the new key up automatically on next activation — no more manual
 
 ## Remote builder SSH keys
 
-On each client, install the private key used to authenticate as `nixremote`:
+Each client authenticates as `nixremote` using its **own default root SSH
+identity** (`/root/.ssh/id_ed25519`) — not a separately-named or shared
+keypair. If a client doesn't have one yet:
 
 ```bash
-sudo install -d -m 0700 /root/.ssh
-sudo install -m 0600 ./nixremote /root/.ssh/nixremote
-sudo ssh -i /root/.ssh/nixremote nixremote@nix-cache nix-store --version
+sudo ssh-keygen -t ed25519 -N '' -f /root/.ssh/id_ed25519
 ```
 
-On `nix-cache`, install the matching public key used by `nixremote` authorized keys.
+Then add its `.pub` contents as a new entry in `vars.remoteBuilderAuthorizedKeys`
+(`variables.nix`) and rebuild `nix-cache` to pick it up (that list is
+declarative — an imperative `ssh-copy-id nixremote@nix-cache` won't stick;
+it gets overwritten on every rebuild). Verify with:
 
-The committed `nixremote` authorized keys are public SSH keys only. Keep the
-matching private keys on client hosts and out of the repository.
+```bash
+sudo ssh -i /root/.ssh/id_ed25519 nixremote@nix-cache nix-store --version
+```
+
+The committed `remoteBuilderAuthorizedKeys` entries are public SSH keys
+only. Keep the matching private keys on client hosts and out of the
+repository.
 
 nix-cache's own SSH *host* key is trusted declaratively via
 `programs.ssh.knownHosts` in `modules/nix-cache/remote-builder-client.nix`,
@@ -76,8 +84,8 @@ After deployment:
 curl http://nix-cache/nix-cache-info
 nix store ping --store http://nix-cache
 nix show-config | grep -E 'substituters|trusted-public-keys|builders-use-substitutes'
-sudo ssh -i /root/.ssh/nixremote nixremote@nix-cache nix-store --version
-nix build nixpkgs#hello --builders 'ssh://nixremote@nix-cache x86_64-linux /root/.ssh/nixremote 4 2 big-parallel,kvm,nixos-test,benchmark' -L
+sudo ssh -i /root/.ssh/id_ed25519 nixremote@nix-cache nix-store --version
+nix build nixpkgs#hello --builders 'ssh://nixremote@nix-cache x86_64-linux /root/.ssh/id_ed25519 4 2 big-parallel,kvm,nixos-test,benchmark' -L
 nix path-info -r nixpkgs#hello
 curl -I "http://nix-cache/$(basename "$(nix path-info nixpkgs#hello)").narinfo"
 ```

docs/proxmox-images.md

@@ -7,11 +7,13 @@ config (`modules/disko/proxmox.nix`) already used to format a real disk on
 install, so there's nothing host-specific to write; it's available for every
 `proxmox-*` target automatically.
 
-`scripts/create-proxmox-resource.sh --type vm --host <name>` automates the
+`scripts/proxmox/create-proxmox-resource.sh --type vm --host <name>` automates the
 whole walkthrough below (and the equivalent LXC one) end to end, including
-host-key handling and upload — see its `--help`. The steps here are what it
-runs under the hood, useful for doing any of it by hand or understanding
-what it does before you trust it against real infrastructure.
+host-key handling and building the image directly on the Proxmox node
+itself (no local build, no image transfer) — see its `--help`. The steps
+here are what it runs under the hood, useful for doing any of it by hand
+or understanding what it does before you trust it against real
+infrastructure.
 
 ## Building
 
@@ -49,7 +51,7 @@ sudo ./result \
   --build-memory 2048
 ```
 
-Generate the key first with `scripts/sync-host-keys.sh <hostname>`, same
+Generate the key first with `scripts/secrets/sync-host-keys.sh <hostname>`, same
 as any other host — see `docs/auto-installer.md` for the full walkthrough
 (it registers the new key in `.sops.yaml` and re-encrypts the affected
 `secrets/*.yaml` files too, no manual editing needed).

docs/pxe-boot.md

@@ -1,9 +1,10 @@
 # pxe-boot
 
-The `pxe-boot` host serves HTTP boot assets for iPXE clients — including a
-self-staged copy of this flake's own auto-installer netboot image, see
-`docs/auto-installer.md` for what that image actually is and does once
-booted.
+The `pxe-boot` host serves HTTP boot assets for iPXE clients — including
+self-staged copies of both this flake's own auto-installer netboot image
+(see `docs/auto-installer.md` for what that image actually is and does once
+booted) and a vanilla, unmodified NixOS minimal netboot image for plain
+rescue/inspection use.
 
 ## Host Role
 
@@ -28,7 +29,8 @@ The host creates these directories with systemd tmpfiles:
 /srv/pxe
 /srv/pxe/http
 /srv/pxe/http/images
-/srv/pxe/http/nixos
+/srv/pxe/http/auto-installer
+/srv/pxe/http/nixos-minimal
 /srv/pxe/http/systemrescue
 /srv/pxe/http/ubuntu
 /srv/pxe/http/rescue
@@ -37,7 +39,7 @@ The host creates these directories with systemd tmpfiles:
 
 Mount shared image storage under `/srv/pxe/http`, preferably
 `/srv/pxe/http/images` unless a menu entry expects files in a specific
-directory such as `/srv/pxe/http/nixos`.
+directory such as `/srv/pxe/http/auto-installer`.
 
 The HTTP iPXE chain is:
 
@@ -50,20 +52,37 @@ undionly.kpxe or ipxe.efi
 
 The generated menu currently exposes entries for:
 
-- NixOS installer
+- NixOS Auto-Installer
+- NixOS Minimal
 - SystemRescue environment
 - iPXE shell
 - Reboot
 
-The NixOS installer entry chain-loads `/srv/pxe/http/nixos/netboot.ipxe`,
-which is nixpkgs' own generated netboot iPXE script (correct `init=`/`initrd=`
-kernel parameters included) rather than a hand-rolled boot line — that script
-in turn expects its kernel/initrd siblings in the same directory. All three
-files (`bzImage`, `initrd`, `netboot.ipxe`) are built from this flake's own
-`modules/installer/iso.nix` netboot image (the same one `nix build .#pxe`
-produces) and staged automatically by
-`modules/pxe-boot/stage-installer-artifacts.nix` via `systemd.tmpfiles.rules`
-— no manual operator step required.
+Both NixOS entries chain-load a `netboot.ipxe` staged into their own
+directory (`/srv/pxe/http/auto-installer/netboot.ipxe` and
+`/srv/pxe/http/nixos-minimal/netboot.ipxe`), each nixpkgs' own generated
+netboot iPXE script (correct `init=`/`initrd=` kernel parameters included)
+rather than a hand-rolled boot line — that script in turn expects its
+kernel/initrd siblings in the same directory. Each directory's three files
+(`bzImage`, `initrd`, `netboot.ipxe`) are built from source and staged
+automatically by `modules/pxe-boot/stage-installer-artifacts.nix` via
+`systemd.tmpfiles.rules` — no manual operator step required:
+
+- `auto-installer` is this flake's own `netbootSystem` (`flake.nix`) — the
+  same auto-installer image `nix build .#pxe` produces. See
+  `docs/auto-installer.md`.
+- `nixos-minimal` is `netbootMinimalSystem` (`flake.nix`) — nixpkgs'
+  `netboot-minimal.nix` composed on its own, with none of this flake's
+  auto-installer wiring (no `common.nix`, no `auto-install.sh`, no baked
+  host keys or custom users). Same `nix build .#pxe-minimal` mechanism as
+  the auto-installer image, just a different module composition. Useful
+  as a plain rescue/inspection shell that doesn't assume anything about
+  this flake.
+
+Both images set `networking.hostName` to match their menu entry/staged
+directory name (`auto-installer` / `nixos-minimal`), so each one's
+generated system name (`nixos-system-<name>-*`) is self-describing rather
+than the nixpkgs default of `nixos-system-nixos-*` for both.
 
 The SystemRescue entry expects the source ISO at:
 

flake-target-refactor-spec.md

@@ -1,143 +0,0 @@
-# Spec: Refactor Flake Targets into Platform × Build-Type Matrix
-
-## Context
-
-The flake at `~/nixos` currently defines these output targets (flat, ad-hoc naming):
-
-- `docker`
-- `linode-minimal`
-- `nix-cache`
-- `nix-minimal`
-- `nixos`
-- `server`
-- `pxe-boot`
-
-Some already follow a `platform-buildtype` convention (`linode-minimal`), most don't.
-`~/nix-auto-installer` is a related repo and should be checked for any coupling to
-these target names (scripts, docs, CI, or install automation that reference them by
-name) before renaming anything.
-
-## Goal
-
-Restructure the flake so targets are generated from two orthogonal concepts:
-
-**Build types** (what the system is for):
-- `minimal`
-- `nix-cache`
-- `server`
-- `docker`
-- `pxe-boot`
-- `gui`
-
-**Platforms** (what it's deployed on):
-- `linode` (Linode VM)
-- `proxmox` (Proxmox VM)
-- `lxc` (Proxmox LXC container)
-
-Final targets should be named consistently as `<platform>-<buildtype>`, e.g.:
-
-```
-linode-minimal    proxmox-minimal    lxc-minimal
-linode-nix-cache  proxmox-nix-cache  lxc-nix-cache
-linode-server     proxmox-server     lxc-server
-linode-docker     proxmox-docker     lxc-docker
-linode-pxe-boot   proxmox-pxe-boot   lxc-pxe-boot
-linode-gui        proxmox-gui        lxc-gui
-```
-
-That's the full matrix (18 targets) if every build type applies to every platform.
-See **Open Questions** below — some combinations may not make sense and should be
-confirmed with me before being built out, not silently included or dropped.
-
-## Migration mapping (old → new)
-
-| Old target        | New target                                          | Notes |
-|--------------------|------------------------------------------------------|-------|
-| `linode-minimal`   | `linode-minimal`                                      | Already correct, keep as-is |
-| `nix-minimal`      | likely `proxmox-minimal` or a platform-less base module | Ambiguous — see Open Questions |
-| `nix-cache`        | base module consumed by `linode-nix-cache`, `proxmox-nix-cache`, `lxc-nix-cache` | Currently platform-less; needs to become a build-type module, not a standalone target |
-| `server`           | base module consumed by `linode-server`, `proxmox-server`, `lxc-server` | Same as above |
-| `docker`           | base module consumed by `linode-docker`, `proxmox-docker`, `lxc-docker` | Confirm docker actually makes sense as an LXC/VM guest build vs. a standalone container image — see Open Questions |
-| `pxe-boot`         | TBD — may stay a single target rather than a per-platform one | See Open Questions |
-| `nixos`            | TBD — unclear what this maps to in the new scheme | See Open Questions |
-
-## Open Questions (Claude Code: raise these with me before implementing, don't guess)
-
-1. **`nixos` target** — what is this currently used for (bare metal install, dev
-   shell, template)? It doesn't obviously map to any of the six build types.
-2. **`nix-minimal` vs `linode-minimal`** — are these two different things, or is
-   `nix-minimal` a leftover/duplicate?
-3. **`pxe-boot` and `gui` across all three platforms** — does PXE boot make sense
-   for an LXC container or a cloud VM (Linode), or is it inherently bare-metal/
-   network-boot only and should remain a single non-platform target? Does `gui`
-   make sense inside an LXC container?
-4. **`docker` as a build type** — is this "a NixOS host configured to run Docker"
-   (which would sensibly have linode/proxmox/lxc variants), or "a Docker container
-   image built by the flake" (which wouldn't take a platform prefix at all, since
-   it doesn't run on Linode/Proxmox/LXC as a guest OS)? These are structurally
-   different and change how it should be wired in.
-5. Confirm whether all 18 combinations should actually exist, or whether this is
-   meant to produce only the combinations that are genuinely useful (e.g. maybe no
-   one needs `lxc-pxe-boot`).
-
-## Implementation approach
-
-1. **Inventory first.** Read the current `flake.nix` and any `nixosConfigurations`/
-   `modules` structure. Map every existing target to what module(s) it actually
-   pulls in. Don't assume — confirm against the real file contents.
-2. **Separate build-type and platform into their own module directories**, e.g.:
-   ```
-   modules/build-types/minimal.nix
-   modules/build-types/nix-cache.nix
-   modules/build-types/server.nix
-   modules/build-types/docker.nix
-   modules/build-types/pxe-boot.nix
-   modules/build-types/gui.nix
-
-   modules/platforms/linode.nix
-   modules/platforms/proxmox.nix
-   modules/platforms/lxc.nix
-   ```
-   Build-type modules should contain only what makes a system "minimal" vs
-   "server" vs "gui", etc. Platform modules should contain only what's specific
-   to running as a Linode VM vs Proxmox VM vs LXC container (virtualisation
-   guest tools, boot method, filesystem/image format, LXC-specific constraints
-   like no kernel modules, etc).
-3. **Generate the target matrix programmatically** in `flake.nix` rather than
-   hand-writing 18 near-identical `nixosConfigurations` entries — e.g. a small
-   function that takes a platform name and build-type name, composes the two
-   modules plus any shared base module, and produces the named output. This
-   keeps future build types/platforms a one-line addition rather than a copy-paste
-   job.
-4. **Only build combinations we've confirmed make sense** (see Open Questions) —
-   don't emit all 18 by default if some are structurally invalid.
-5. **Preserve existing working configs during the transition.** Don't delete the
-   old target names until their replacements build successfully — rename/alias
-   at the end, not the start, so there's no window where the flake is broken.
-
-## Verification
-
-For every new target produced:
-```bash
-nix flake check
-nix build .#nixosConfigurations.<target>.config.system.build.toplevel
-```
-Confirm each builds without evaluation errors before considering it done. If a
-target fails to build, report which one and why rather than silently skipping it.
-
-## Deliverables
-
-- Refactored `flake.nix` using the composed module + generated-matrix approach.
-- New `modules/build-types/*.nix` and `modules/platforms/*.nix` files.
-- Old flat target names removed only after their replacements are verified.
-- A short `README.md` (or section in existing docs) listing the final target
-  names and what each one is for.
-- A summary at the end of what changed, what was removed, and any of the Open
-  Questions above that got resolved differently than expected.
-
-## Out of scope
-
-- Don't touch `~/nix-auto-installer` contents beyond checking it for references
-  to the old target names — if changes there are needed, flag them, don't make
-  them without confirming.
-- Don't add new build types or platforms beyond the ones listed here.

flake.lock

@@ -95,11 +95,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1783740085,
-        "narHash": "sha256-qajyHfZY29G2oEQk+uHxmsJcRoBUBXP9maTpFlwP/dI=",
+        "lastModified": 1784350909,
+        "narHash": "sha256-ZWyzLbS1yKUTeFJLmdVuWNnHttL333/ldJbEE+KzCrM=",
         "owner": "nix-community",
         "repo": "home-manager",
-        "rev": "3cd22efe6471dc7365c822bd9ad73a21e55f38fb",
+        "rev": "4ce190229c73d44536caa7072f6308fb2d8feeb3",
         "type": "github"
       },
       "original": {
@@ -147,11 +147,11 @@
     },
     "nixpkgs_2": {
       "locked": {
-        "lastModified": 1784011430,
-        "narHash": "sha256-lDebytrYdd47IBLwvNOD+6AGeoqZ78CIKlp70hzW280=",
+        "lastModified": 1784432872,
+        "narHash": "sha256-n3gKTBIV4ZA5VQpUakffBe3KGu4+mhPoA34rrqS0GkA=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "8eeec934ae0dbeca3d7868c059568a65c08b2fc3",
+        "rev": "fd1462031fdee08f65fd0b4c6b64e22239a77870",
         "type": "github"
       },
       "original": {

flake.nix

@@ -65,7 +65,7 @@
           # file without a same-option circular dependency (a module
           # contributing to environment.etc can't read the merged
           # environment.etc it's itself contributing to).
-          specialArgs = { inherit inputs vars netbootSystem flakeTarget; };
+          specialArgs = { inherit inputs vars netbootSystem netbootMinimalSystem flakeTarget; };
         };
 
       # Generated platform x build-type matrix. pxe-boot has no linode
@@ -91,13 +91,16 @@
         linode-gui = mkTarget { platform = "linode"; buildType = "gui"; hostPath = ./hosts/nixos/host.nix; homeFile = ./hosts/nixos/home.nix; };
         proxmox-gui = mkTarget { platform = "proxmox"; buildType = "gui"; hostPath = ./hosts/nixos/host.nix; homeFile = ./hosts/nixos/home.nix; };
         lxc-gui = mkTarget { platform = "lxc"; buildType = "gui"; hostPath = ./hosts/nixos/host.nix; homeFile = ./hosts/nixos/home.nix; };
+        baremetal-gui = mkTarget { platform = "baremetal"; buildType = "gui"; hostPath = ./hosts/nixos/host.nix; homeFile = ./hosts/nixos/home.nix; };
 
         proxmox-pxe-boot = mkTarget { platform = "proxmox"; buildType = "pxe-boot"; hostPath = ./hosts/pxe-boot/host.nix; };
         lxc-pxe-boot = mkTarget { platform = "lxc"; buildType = "pxe-boot"; hostPath = ./hosts/pxe-boot/host.nix; };
 
-        linode-tailscale-exit-node = mkTarget { platform = "linode"; buildType = "tailscale-exit-node"; hostPath = ./hosts/tailscale-exit-node/host.nix; };
-        proxmox-tailscale-exit-node = mkTarget { platform = "proxmox"; buildType = "tailscale-exit-node"; hostPath = ./hosts/tailscale-exit-node/host.nix; };
-        lxc-tailscale-exit-node = mkTarget { platform = "lxc"; buildType = "tailscale-exit-node"; hostPath = ./hosts/tailscale-exit-node/host.nix; };
+        linode-tailscale-subnet-router = mkTarget { platform = "linode"; buildType = "tailscale-subnet-router"; hostPath = ./hosts/tailscale-subnet-router/host.nix; };
+        proxmox-tailscale-subnet-router = mkTarget { platform = "proxmox"; buildType = "tailscale-subnet-router"; hostPath = ./hosts/tailscale-subnet-router/host.nix; };
+        lxc-tailscale-subnet-router = mkTarget { platform = "lxc"; buildType = "tailscale-subnet-router"; hostPath = ./hosts/tailscale-subnet-router/host.nix; };
+
+        lxc-tor-relay = mkTarget { platform = "lxc"; buildType = "tor-relay"; hostPath = ./hosts/tor-relay/host.nix; };
       };
 
       # Auto-install environments (migrated from the former nix-auto-installer
@@ -117,19 +120,61 @@
 
       # Same installer environment, built as netboot (kernel + initrd +
       # iPXE script) instead of an ISO — this is what packages.pxe bundles.
+      #
+      # Deliberately imports common.nix directly, NOT ./modules/installer/iso.nix
+      # (which pulls in nixpkgs' installation-cd-minimal.nix) -- confirmed live
+      # that composing the ISO module together with netboot-minimal.nix hangs
+      # every boot waiting for a device that can never exist on a netboot
+      # client ("A start job is running for /dev/disk/by-label/nixos-minimal-...").
+      # Both installation-cd-base.nix and netboot.nix set fileSystems."/" via
+      # the identical lib.mkImageMediaOverride (mkOverride 60) priority --
+      # genuinely conflicting root-filesystem strategies (ISO-by-label vs.
+      # netboot-tmpfs) at the same priority, and the ISO one was winning.
+      # netboot-minimal.nix's own chain (netboot-base.nix) already imports
+      # profiles/installation-device.nix independently, so common.nix's
+      # initialHashedPassword override (which assumes that profile is
+      # present) still applies correctly without iso.nix in the mix.
+      #
+      # networking.hostName is set explicitly (rather than left at nixpkgs'
+      # own "nixos" default) so this image's generated system name
+      # (nixos-system-auto-installer-*) matches its iPXE menu entry —
+      # see modules/build-types/pxe-boot.nix's :auto-installer item — and
+      # its staged directory, /srv/pxe/http/auto-installer.
       netbootSystem = nixpkgs.lib.nixosSystem {
         inherit system;
         modules = [
-          ./modules/installer/iso.nix
+          ./modules/installer/common.nix
           ({ modulesPath, ... }: {
             imports = [
               (modulesPath + "/installer/netboot/netboot-minimal.nix")
             ];
           })
+          { networking.hostName = "auto-installer"; }
         ];
         specialArgs = { inherit vars; };
       };
 
+      # A genuinely vanilla NixOS minimal netboot image: nixpkgs'
+      # netboot-minimal.nix on its own, with none of this flake's
+      # auto-installer wiring (no common.nix — no auto-install.sh, no
+      # baked host keys, no custom users/passwords). Built from source via
+      # the same nixosSystem + netboot-minimal.nix path as netbootSystem
+      # above, so both go through an identical build mechanism; the only
+      # difference is what's composed in. hostName again matches this
+      # image's iPXE menu entry (:nixos-minimal) and staged directory
+      # (/srv/pxe/http/nixos-minimal).
+      netbootMinimalSystem = nixpkgs.lib.nixosSystem {
+        inherit system;
+        modules = [
+          ({ modulesPath, ... }: {
+            imports = [
+              (modulesPath + "/installer/netboot/netboot-minimal.nix")
+            ];
+          })
+          { networking.hostName = "nixos-minimal"; }
+        ];
+      };
+
     in
     {
 
@@ -151,6 +196,15 @@
           { name = "initrd"; path = netbootSystem.config.system.build.netbootRamdisk; }
           { name = "kernel"; path = netbootSystem.config.system.build.kernel; }
         ];
+
+        # Vanilla NixOS minimal netboot bundle — see netbootMinimalSystem
+        # above. Staged onto the pxe-boot host alongside packages.pxe by
+        # modules/pxe-boot/stage-installer-artifacts.nix.
+        pxe-minimal = pkgs.linkFarm "pxe-minimal" [
+          { name = "netboot.ipxe"; path = netbootMinimalSystem.config.system.build.netbootIpxeScript; }
+          { name = "initrd"; path = netbootMinimalSystem.config.system.build.netbootRamdisk; }
+          { name = "kernel"; path = netbootMinimalSystem.config.system.build.kernel; }
+        ];
       };
     };
 }

hosts/nixos/home.nix

@@ -19,11 +19,15 @@
       nextcloud-client
       #    vscode
       chromium
+      claude-code
+      fish
+      sops
     ];
 
     # Optional: set environment vars
     sessionVariables = {
       EDITOR = "vim";
+      SOPS_AGE_KEY_FILE = "/home/nixos/Nextcloud/Filing Cabinet/keys/nixos-sops-age-key-txt";
     };
 
     file = {

hosts/nixos/host.nix

@@ -1,8 +1,17 @@
 _:
 
 {
+  imports = [
+    ../../modules/networking/wifi.nix
+  ];
+
   networking.hostName = "nixos";
 
+  # Only needed now that baremetal-gui exists (ZFS root) -- harmless on the
+  # ext4-rooted linode/proxmox/lxc-gui variants, so set unconditionally
+  # rather than only on the baremetal platform.
+  networking.hostId = "de6a9ffc";
+
   # Preserved from the pre-refactor `nixos` target — stateVersion must never
   # be bumped on an already-installed machine.
   system.stateVersion = "25.05";

hosts/tailscale-subnet-router/host.nix

@@ -0,0 +1,10 @@
+_:
+
+{
+  networking.hostName = "tailscale-router";
+
+  # No networking.hostId: only ZFS-touching hosts (server, docker) need one
+  # for pool-import safety, and this host does neither.
+
+  system.stateVersion = "26.05";
+}

hosts/tor-relay/host.nix

@@ -1,7 +1,7 @@
 _:
 
 {
-  networking.hostName = "exit-node";
+  networking.hostName = "tor-relay";
 
   # No networking.hostId: only ZFS-touching hosts (server, docker) need one
   # for pool-import safety, and this host does neither.

modules/build-types/gui.nix

@@ -18,7 +18,7 @@
   ];
 
   boot.loader.grub.useOSProber = true;
-
+programs.direnv.enable = true;
   services = {
     xserver = {
       enable = true;

modules/build-types/pxe-boot.nix

@@ -68,15 +68,19 @@ let
     set base ${pxeBaseUrl}
 
     menu PXE Boot Menu
-    item nixos NixOS Installer
+    item auto-installer NixOS Auto-Installer
+    item nixos-minimal NixOS Minimal
     item rescue Rescue Environment
     item shell iPXE Shell
     item reboot Reboot
 
     choose target && goto ''${target}
 
-    :nixos
-    chain ''${base}/nixos/netboot.ipxe
+    :auto-installer
+    chain ''${base}/auto-installer/netboot.ipxe
+
+    :nixos-minimal
+    chain ''${base}/nixos-minimal/netboot.ipxe
 
     :rescue
     chain ''${base}/systemrescue.ipxe
@@ -129,7 +133,8 @@ in
     "d ${pxeRoot} 0755 root root -"
     "d ${httpRoot} 0755 root root -"
     "d ${httpRoot}/images 0755 root root -"
-    "d ${httpRoot}/nixos 0755 root root -"
+    "d ${httpRoot}/auto-installer 0755 root root -"
+    "d ${httpRoot}/nixos-minimal 0755 root root -"
     "d ${httpRoot}/systemrescue 0755 root root -"
     "d ${httpRoot}/ubuntu 0755 root root -"
     "d ${httpRoot}/rescue 0755 root root -"

modules/build-types/server.nix

@@ -1,12 +1,74 @@
-{ vars, lib, ... }:
+{ vars, lib, pkgs, ... }:
 
+let
+  poolName = lib.removePrefix "/" vars.storageRoot;
+
+  # For each NFS share subpath, generate every ancestor path so ZFS datasets
+  # are created parent-first.  e.g. "docker/config" → ["docker" "docker/config"]
+  ancestors = path:
+    let parts = lib.splitString "/" path;
+    in lib.imap1 (i: _: lib.concatStringsSep "/" (lib.take i parts)) parts;
+
+  poolDatasets = lib.unique (
+    lib.concatMap (share: ancestors share.subpath) (lib.attrValues vars.nfsShares)
+  );
+in
 {
   imports = [
     ../beszel/enable-agent.nix
     ../services/zfs/enable-service.nix
   ];
 
-  boot.zfs.extraPools = [ (lib.removePrefix "/" vars.storageRoot) ];
+  boot.zfs.extraPools = [ poolName ];
+
+  # On a fresh image deploy the data disk (scsi1) starts blank — no pool
+  # exists yet, so zfs-import-tank.service would spin for 60 s and fail.
+  # This service runs first: if the pool is already present it exits instantly;
+  # otherwise it creates it (with all required datasets) so the standard
+  # import service finds it ready on the very first boot.
+  systemd.services."zfs-init-${poolName}" = {
+    description = "Initialize '${poolName}' ZFS pool on first boot if not present";
+    wantedBy = [ "zfs-import-${poolName}.service" ];
+    before = [ "zfs-import-${poolName}.service" ];
+    after = [ "systemd-udev-settle.service" ];
+    unitConfig.DefaultDependencies = false;
+    serviceConfig = {
+      Type = "oneshot";
+      RemainAfterExit = true;
+    };
+    path = [ pkgs.zfs_unstable ];
+    script = ''
+      # Already imported — nothing to do.
+      if zpool list "${poolName}" >/dev/null 2>&1; then
+        exit 0
+      fi
+
+      # Pool exists on a device but not yet imported — let the standard
+      # zfs-import-${poolName}.service handle it normally.
+      if zpool import -d /dev/disk/by-id -N "${poolName}" 2>/dev/null; then
+        exit 0
+      fi
+
+      # No pool found at all.  Create it on the Proxmox data disk (scsi1),
+      # which appears as /dev/disk/by-id/scsi-*drive-scsi1 inside the VM.
+      DATA_DISK=""
+      for candidate in /dev/disk/by-id/scsi-*drive-scsi1; do
+        [[ "$candidate" == *-part* ]] && continue
+        [ -b "$candidate" ] && DATA_DISK="$candidate" && break
+      done
+
+      if [ -z "$DATA_DISK" ]; then
+        echo "zfs-init-${poolName}: no data disk found (expected /dev/disk/by-id/scsi-*drive-scsi1)" >&2
+        exit 1
+      fi
+
+      echo "zfs-init-${poolName}: creating pool on $DATA_DISK"
+      zpool create -f "${poolName}" "$DATA_DISK"
+      ${lib.concatMapStrings (ds: ''
+        zfs create "${poolName}/${ds}"
+      '') poolDatasets}
+    '';
+  };
 
   systemd.services.nfs-server = {
     after = [ "zfs-mount.service" ];

modules/build-types/tailscale-exit-node.nix

@@ -1,21 +0,0 @@
-{ ... }:
-
-{
-  imports = [
-    ../tailscale/exit-node.nix
-  ];
-
-  # "server", not "both": this build type only ever advertises itself as an
-  # exit node (see ../tailscale/exit-node.nix) -- it doesn't advertise LAN
-  # subnet routes, so it doesn't need the "client"-side loose reverse-path
-  # filtering that "both" would also turn on. Deliberately left unbundled
-  # from LAN-subnet-route advertisement so this build type stays valid on
-  # every platform, including linode (a remote VPS with no network path to
-  # the home LAN at all).
-  services.tailscale.useRoutingFeatures = "server";
-
-  # Forwarded exit-node traffic arrives on tailscale0 already
-  # tailscale-authenticated -- the firewall's normal per-port allow-list
-  # would otherwise drop it. Standard NixOS/Tailscale exit-node guidance.
-  networking.firewall.trustedInterfaces = [ "tailscale0" ];
-}

modules/build-types/tailscale-subnet-router.nix

@@ -0,0 +1,19 @@
+{ ... }:
+
+{
+  imports = [
+    ../tailscale/subnet-router.nix
+  ];
+
+  # "server", not "both": this build type advertises LAN subnet routes but
+  # doesn't use another tailscale exit node itself, so it doesn't need the
+  # "client"-side loose reverse-path filtering that "both" would also enable.
+  # Deliberately kept explicit here (not just relying on subnet-router.nix's
+  # own setting) so the intent is clear at the build-type level.
+  services.tailscale.useRoutingFeatures = "server";
+
+  # Forwarded subnet-router traffic arrives on tailscale0 already
+  # tailscale-authenticated -- the firewall's normal per-port allow-list
+  # would otherwise drop it. Standard NixOS/Tailscale subnet-router guidance.
+  networking.firewall.trustedInterfaces = [ "tailscale0" ];
+}

modules/build-types/tor-relay.nix

@@ -0,0 +1,8 @@
+{ ... }:
+
+{
+  imports = [
+    ../tor/enable-relay.nix
+    ../beszel/enable-agent.nix
+  ];
+}

modules/common/configuration.nix

@@ -31,6 +31,7 @@
     btop
     git
     gcr
+    jq
   ];
 
   # Secrets shared by every host, decrypted at activation via each host's
@@ -76,6 +77,7 @@
     openssh.authorizedKeys.keys = [
       vars.adminSshKey
       "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAICMJhrfFayLBG+gWtO6oAvgambw5nWWgztiTFEaaaVRH debian@surface"
+      "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIGygkCljN6uKpdJbHTOQtn8ZnH+wKXDLAwrDFbLrE/65 nixos@nixos"
     ];
   };
 

modules/disko/baremetal.nix

@@ -0,0 +1,87 @@
+{ vars, ... }:
+
+{
+  # ZFS RAID0 (striped, no redundancy) root pool for the bare-metal gui
+  # host — two disks, each contributing its own top-level vdev. disko's
+  # zpool `mode` defaults to "" (plain stripe) when left unset, which is
+  # what gives RAID0 semantics here rather than mirror/raidz.
+  #
+  # Device paths are placeholders until the real hardware profile lands —
+  # fill in vars.guiRootDisk1/guiRootDisk2 (stable /dev/disk/by-id/...
+  # paths, not /dev/sdX) before running disko against real hardware. Swap
+  # is deliberately left out for now — sizing that sensibly needs the
+  # box's actual RAM size, which comes with the hardware profile too.
+  #
+  # Not yet imported anywhere: this awaits the new bare-metal platform
+  # module (alongside modules/boot/efi.nix for systemd-boot, matching
+  # modules/platforms/proxmox.nix's pattern) once the hardware config is
+  # in hand.
+  disko.devices = {
+    disk = {
+      disk1 = {
+        type = "disk";
+        device = vars.guiRootDisk1;
+
+        content = {
+          type = "gpt";
+
+          partitions = {
+            esp = {
+              priority = 1;
+              name = "ESP";
+              size = "512M";
+              type = "EF00";
+
+              content = {
+                type = "filesystem";
+                format = "vfat";
+                mountpoint = "/boot";
+                mountOptions = [ "umask=0077" ];
+              };
+            };
+
+            zfs = {
+              size = "100%";
+
+              content = {
+                type = "zfs";
+                pool = "rpool";
+              };
+            };
+          };
+        };
+      };
+
+      disk2 = {
+        type = "disk";
+        device = vars.guiRootDisk2;
+
+        content = {
+          type = "gpt";
+
+          partitions = {
+            zfs = {
+              size = "100%";
+
+              content = {
+                type = "zfs";
+                pool = "rpool";
+              };
+            };
+          };
+        };
+      };
+    };
+
+    zpool.rpool = {
+      type = "zpool";
+
+      rootFsOptions = {
+        compression = "zstd";
+        "com.sun:auto-snapshot" = "false";
+      };
+      mountpoint = "/";
+      options.ashift = "12";
+    };
+  };
+}

modules/docker/mount-data.nix

@@ -1,65 +1,84 @@
 { config, lib, pkgs, vars, ... }:
 
+let
+  # `x-systemd.automount` never works inside a Linux container (LXC
+  # included, regardless of privilege) -- confirmed live on lxc-docker:
+  # systemd logs "Starting of <unit>.automount unsupported" for every
+  # share and never mounts them. Mount eagerly there instead, with
+  # `nofail` so a boot with the NFS server unreachable doesn't hang
+  # (the VM platforms rely on automount itself to get that same
+  # non-blocking behavior, so they don't need `nofail` too).
+  automountOpts = if config.boot.isContainer then [ "nofail" ] else [ "x-systemd.automount" ];
+
+  # A bare hostname here never resolves reliably: systemd-resolved only
+  # ever tries LLMNR for single-label names (never DNS, regardless of any
+  # configured search domain), and a *global* search domain (the first fix
+  # attempted here) backfires worse -- confirmed live on lxc-docker, adding
+  # `networking.search` made systemd-resolved prioritize its domain-matched
+  # but server-less global scope over eth0's correctly-configured one for
+  # every "*.sweet.home" query, silently sending them to public fallback
+  # DNS instead. `resolvectl query --interface=eth0 server.sweet.home`
+  # resolved fine throughout, proving the LAN DNS server was never the
+  # problem -- only the ambient, unqualified device string was. Using the
+  # FQDN directly sidesteps all of that, matching the pattern
+  # ../raspi/mount-data.nix already uses for the same reason.
+  nfsServer = "${vars.nfsServerHost}.${vars.homeDomain}";
+in
 {
   fileSystems = {
     ${vars.nfsShares.dockerConfig.mountpoint} = {
-      device = "${vars.nfsServerHost}:${vars.storageRoot}/${vars.nfsShares.dockerConfig.subpath}";
+      device = "${nfsServer}:${vars.storageRoot}/${vars.nfsShares.dockerConfig.subpath}";
       fsType = "nfs";
 
       options = [
         "nfsvers=4.2"
         "_netdev"
-        "x-systemd.automount"
         "noatime"
-      ];
+      ] ++ automountOpts;
     };
 
     ${vars.nfsShares.dockerDatabases.mountpoint} = {
-      device = "${vars.nfsServerHost}:${vars.storageRoot}/${vars.nfsShares.dockerDatabases.subpath}";
+      device = "${nfsServer}:${vars.storageRoot}/${vars.nfsShares.dockerDatabases.subpath}";
       fsType = "nfs";
 
       options = [
         "nfsvers=4.2"
         "_netdev"
-        "x-systemd.automount"
         "noatime"
-      ];
+      ] ++ automountOpts;
     };
 
     ${vars.nfsShares.dockerVolumes.mountpoint} = {
-      device = "${vars.nfsServerHost}:${vars.storageRoot}/${vars.nfsShares.dockerVolumes.subpath}";
+      device = "${nfsServer}:${vars.storageRoot}/${vars.nfsShares.dockerVolumes.subpath}";
       fsType = "nfs";
 
       options = [
         "nfsvers=4.2"
         "_netdev"
-        "x-systemd.automount"
         "noatime"
-      ];
+      ] ++ automountOpts;
     };
 
     ${vars.nfsShares.nextcloudData.mountpoint} = {
-      device = "${vars.nfsServerHost}:${vars.storageRoot}/${vars.nfsShares.nextcloudData.subpath}";
+      device = "${nfsServer}:${vars.storageRoot}/${vars.nfsShares.nextcloudData.subpath}";
       fsType = "nfs";
 
       options = [
         "nfsvers=4.2"
         "_netdev"
-        "x-systemd.automount"
         "noatime"
-      ];
+      ] ++ automountOpts;
     };
 
     ${vars.nfsShares.raspiVolumes.mountpoint} = {
-      device = "${vars.nfsServerHost}:${vars.storageRoot}/${vars.nfsShares.raspiVolumes.subpath}";
+      device = "${nfsServer}:${vars.storageRoot}/${vars.nfsShares.raspiVolumes.subpath}";
       fsType = "nfs";
 
       options = [
         "nfsvers=4.2"
         "_netdev"
-        "x-systemd.automount"
         "noatime"
-      ];
+      ] ++ automountOpts;
     };
   };
 }

modules/hardware-configuration/baremetal.nix

@@ -0,0 +1,23 @@
+# Adapted from the output of `nixos-generate-config`, run from a live GUI
+# ISO boot on the actual gui-host hardware (AMD CPU). fileSystems and
+# swapDevices are deliberately omitted -- the live ISO had no formatted
+# disks to detect, and disko (modules/disko/baremetal.nix) generates both
+# from the declarative zpool layout anyway.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [
+      (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot = {
+    initrd.availableKernelModules = [ "xhci_pci" "ahci" "usbhid" "usb_storage" "sd_mod" ];
+    initrd.kernelModules = [ ];
+    kernelModules = [ "kvm-amd" ];
+    extraModulePackages = [ ];
+  };
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}

modules/installer/common.nix

@@ -45,142 +45,23 @@
       disko
     ];
 
-    # Write auto-install script to /root
-    etc."auto-install.sh" = {
-      text = ''
-            #!/run/current-system/sw/bin/bash
-            set -eux
-
-            set -euo pipefail
-
-        export FLAKE_BASE_URL="git+https://${vars.lanDomain}/beatzaplenty/nixos.git"
-
-        echo "Fetching available NixOS hosts from flake..."
-        # Two categories deliberately excluded from the menu:
-        #   lxc-*     — these build a config.system.build.tarball meant for
-        #               `pct restore` on Proxmox directly, not an install.
-        #               Running nixos-install against one here would
-        #               bind-mount / onto /mnt and then refuse to touch the
-        #               filesystem it's currently running on — see
-        #               docs/auto-installer.md.
-        #   installer — this *is* the installer image's own flake target,
-        #               not a deployable host; "installing" it means
-        #               nixos-install-ing a copy of the installer into
-        #               itself.
-        mapfile -t options < <(
-          nix eval --json --no-use-registries --no-accept-flake-config --extra-experimental-features "flakes nix-command" \
-            "''${FLAKE_BASE_URL}#nixosConfigurations" \
-            --apply builtins.attrNames \
-          | jq -r '.[]
-              | select(startswith("lxc-") | not)
-              | select(. != "installer")'
-        )
-
-        if [[ ''${#options[@]} -eq 0 ]]; then
-          echo "ERROR: No NixOS hosts found in ''${FLAKE_BASE_URL}#nixosConfigurations" >&2
-          exit 1
-        fi
-
-        echo "Note: lxc-* targets aren't installed this way — build them with"
-        echo "  nix build .#nixosConfigurations.<name>.config.system.build.tarball"
-        echo "and 'pct restore' the result on Proxmox directly. See docs/auto-installer.md."
-
-        echo "Choose the flake profile to install:"
-        select choice in "''${options[@]}"; do
-          if [[ -n "$choice" ]]; then
-            echo "You selected: $choice"
-            break
-          else
-            echo "Invalid selection. Try again."
-          fi
-        done
-
-        echo "Starting install with flake: ''${FLAKE_BASE_URL}#''${choice}"
-
-        # Optional: confirm before proceeding
-        read -rp "Proceed with installation? (y/N): " confirm
-        if [[ ! "$confirm" =~ ^[Yy]$ ]]; then
-          echo "Aborted."
-          exit 1
-        fi
-
-        # A nix-cache host is *the* substituter/remote-builder for every other
-        # host once installed (its own config explicitly excludes itself from
-        # using either — see buildType != "nix-cache" in the nixos flake.nix).
-        # Installing one shouldn't depend on a nix-cache substituter either,
-        # for the same reason — plus in practice "nix-cache" only resolves over
-        # Tailscale, which a fresh installer environment was never connected to
-        # anyway, so it's dead weight even for non-nix-cache installs until
-        # that's sorted out. Override it away here specifically for nix-cache
-        # targets to keep install-time behaviour consistent with run-time.
-        nix_extra_opts=()
-        if [[ "''${choice}" == *-nix-cache ]]; then
-            echo "Installing a nix-cache host — skipping the nix-cache substituter."
-            nix_extra_opts+=(--option substituters "https://cache.nixos.org/")
-        fi
-
-        # Every host reachable through this menu has a Disko config (lxc-*
-        # is filtered out above, and is the only category that doesn't —
-        # see docs/auto-installer.md), so this can run unconditionally: no
-        # need to probe the flake first and branch on whether Disko applies.
-        disko --mode destroy,format,mount \
-            --flake "''${FLAKE_BASE_URL}#''${choice}" "''${nix_extra_opts[@]}" --yes-wipe-all-disks
-
-        # sops-nix derives this host's decryption key from its own SSH host key
-        # at *activation* time, which runs before systemd would otherwise
-        # generate one on first boot. Without pre-seeding it here, secrets
-        # (including the login password) fail to decrypt on first boot.
-        # Generate the key with scripts/prepare-host-key.sh first.
-        #
-        # Two places a key can come from, checked in order:
-        #   /etc/host-keys  — baked into this image at build time (see
-        #                      modules/installer/host-keys.nix; only present
-        #                      if built with NIXOS_HOST_KEYS_DIR set)
-        #   /root/host-keys — scp'd in manually after boot (older fallback,
-        #                      still supported for images built without keys)
-        mkdir -p /root/host-keys
-        if [[ -f "/etc/host-keys/''${choice}_ssh_host_ed25519_key" ]]; then
-            echo "Found baked-in SSH host key for ''${choice}, installing to target..."
-            install -D -m 0600 "/etc/host-keys/''${choice}_ssh_host_ed25519_key" /mnt/etc/ssh/ssh_host_ed25519_key
-            install -D -m 0644 "/etc/host-keys/''${choice}_ssh_host_ed25519_key.pub" /mnt/etc/ssh/ssh_host_ed25519_key.pub
-        elif [[ -f "/root/host-keys/''${choice}_ssh_host_ed25519_key" ]]; then
-            echo "Found pre-seeded SSH host key for ''${choice}, installing to target..."
-            install -D -m 0600 "/root/host-keys/''${choice}_ssh_host_ed25519_key" /mnt/etc/ssh/ssh_host_ed25519_key
-            install -D -m 0644 "/root/host-keys/''${choice}_ssh_host_ed25519_key.pub" /mnt/etc/ssh/ssh_host_ed25519_key.pub
-        else
-            echo "WARNING: no SSH host key found for ''${choice} (checked /etc/host-keys and /root/host-keys)"
-            echo "sops-nix secrets (including the login password) will NOT decrypt on first boot."
-            echo "Run scripts/prepare-host-key.sh for host ''${choice} on your admin workstation first,"
-            echo "then either rebuild this image with NIXOS_HOST_KEYS_DIR set, or scp the result to"
-            echo "/root/host-keys/ on this machine."
-            read -rp "Continue without a pre-seeded key anyway? (y/N): " skip_key
-            if [[ ! "$skip_key" =~ ^[Yy]$ ]]; then
-                echo "Aborted."
-                exit 1
-            fi
-        fi
-
-        mkdir -p /mnt/install-tmp
-        export TMPDIR=/mnt/install-tmp
-
-        nixos-install \
-            --flake "''${FLAKE_BASE_URL}#''${choice}" \
-            "''${nix_extra_opts[@]}" \
-            --no-root-password
-
-
-            rm -rf /mnt/install-tmp
-            # Redundant copy of the host's private key — the real one is now at
-            # /etc/ssh/ssh_host_ed25519_key. Nothing NixOS-managed ever cleans this
-            # up on its own since it was written imperatively, not declaratively.
-            rm -rf /root/host-keys
-            sleep 10
-            reboot
-      '';
+    # Auto-install script, kept as a real, version-controlled shell file at
+    # scripts/installer/auto-install.sh rather than an inline Nix string.
+    # It sources scripts/env.sh itself (for LAN_DOMAIN, same as every other
+    # script in this repo) rather than relying on Nix-level templating, so
+    # it behaves identically whether it's run straight from a git checkout
+    # or from here -- baking scripts/env.sh in alongside it at a matching
+    # relative path (installer/auto-install.sh -> ../env.sh) is what makes
+    # that resolve correctly in both places.
+    etc = {
+      "nixos-installer/env.sh".source = ../../scripts/env.sh;
 
+      "nixos-installer/installer/auto-install.sh" = {
+        source = ../../scripts/installer/auto-install.sh;
         mode = "0755";
       };
     };
+  };
 
   programs.git.enable = true;
 
@@ -192,7 +73,7 @@
   # file-copying/chown.
   programs.bash.loginShellInit = ''
     if [ -n "$PS1" ] && [ ! -e "$HOME/.auto_install_ran" ]; then
-      sudo /etc/auto-install.sh
+      sudo /etc/nixos-installer/installer/auto-install.sh
       touch "$HOME/.auto_install_ran"
     fi
   '';

modules/networking/wifi.nix

@@ -0,0 +1,43 @@
+{ config, lib, vars, ... }:
+
+{
+  # Prestages a NetworkManager connection profile for vars.wifiSsid so the
+  # host associates on first boot with no manual nmtui/nmcli step. Guarded
+  # on a non-empty SSID so leaving the placeholder blank in variables.nix
+  # is a no-op rather than an empty, broken profile — fill it in once the
+  # network is known.
+  #
+  # The password itself lives in secrets/gui.yaml, not variables.nix --
+  # NetworkManager's ensureProfiles renders `psk = "$WIFI_PASSWORD"`
+  # literally into the store (see nixpkgs' own ensureProfiles example,
+  # which does the same for exactly this reason) and its systemd service
+  # envsubst-expands it from environmentFiles at activation time, so the
+  # real value only ever touches /run (root-only, UMask 0177), never the
+  # Nix store.
+  sops.secrets."wifi-password" = lib.mkIf (vars.wifiSsid != "") {
+    sopsFile = ../../secrets/gui.yaml;
+  };
+
+  sops.templates."wifi-password.env" = lib.mkIf (vars.wifiSsid != "") {
+    content = "WIFI_PASSWORD=${config.sops.placeholder."wifi-password"}";
+  };
+
+  networking.networkmanager.ensureProfiles = lib.mkIf (vars.wifiSsid != "") {
+    environmentFiles = [ config.sops.templates."wifi-password.env".path ];
+
+    profiles.${vars.wifiSsid} = {
+      connection = {
+        id = vars.wifiSsid;
+        type = "wifi";
+      };
+      wifi = {
+        mode = "infrastructure";
+        ssid = vars.wifiSsid;
+      };
+      wifi-security = {
+        key-mgmt = "wpa-psk";
+        psk = "$WIFI_PASSWORD";
+      };
+    };
+  };
+}

modules/nix-cache/remote-builder-client.nix

@@ -1,10 +1,14 @@
 { pkgs, vars, ... }:
 
 {
-  # Install the remote builder key on each client host (do not commit private keys):
-  #   sudo install -d -m 0700 /root/.ssh
-  #   sudo install -m 0600 ./nixremote /root/.ssh/nixremote
-  #   sudo ssh -i /root/.ssh/nixremote nixremote@nix-cache nix-store --version
+  # Authenticate as nixremote using the client host's own default root SSH
+  # identity (/root/.ssh/id_ed25519) rather than a separately-named key --
+  # matches vars.remoteBuilderAuthorizedKeys, which already authorizes
+  # each host's own default key (one entry per host, not a shared
+  # dedicated keypair). If this host doesn't have one yet:
+  #   sudo -u root ssh-keygen -t ed25519 -N '' -f /root/.ssh/id_ed25519
+  #   # then add its .pub to vars.remoteBuilderAuthorizedKeys and rebuild nix-cache
+  #   sudo ssh -i /root/.ssh/id_ed25519 nixremote@nix-cache nix-store --version
   # Trust nix-cache's SSH host key declaratively so the nix-daemon (root)
   # can connect the first time without a manual ssh-keyscan/known_hosts
   # step on every new client.
@@ -20,7 +24,7 @@
       {
         hostName = vars.nixCacheHost;
         sshUser = vars.remoteBuilderUser;
-        sshKey = "/root/.ssh/${vars.remoteBuilderUser}";
+        sshKey = "/root/.ssh/id_ed25519";
         inherit (pkgs.stdenv.hostPlatform) system;
         maxJobs = 4;
         speedFactor = 2;

modules/platforms/baremetal.nix

@@ -0,0 +1,38 @@
+{ ... }:
+
+{
+  imports = [
+    ../hardware-configuration/baremetal.nix
+    ../boot/efi.nix
+    ../disko/baremetal.nix
+    ../services/zfs/enable-service.nix
+  ];
+
+  # Needed for real wifi/bluetooth/GPU firmware blobs and CPU microcode
+  # updates (hardware-configuration/baremetal.nix's amd.updateMicrocode
+  # keys off this) -- irrelevant on the linode/proxmox/lxc platforms,
+  # which are all VMs with no real hardware to load firmware for.
+  hardware.enableRedistributableFirmware = true;
+
+  # AMD GPU: the amdgpu kernel driver autoloads from the PCI ID with no
+  # extra boot.kernelModules entry needed; this is the userspace half --
+  # the dedicated Xorg driver (not just the generic modesetting fallback)
+  # plus Mesa OpenGL/Vulkan (amdgpu/RADV), same firmware blobs as above.
+  # 32-bit support is for compatibility with 32-bit apps/games.
+  services.xserver.videoDrivers = [ "amdgpu" ];
+
+  hardware.graphics = {
+    enable = true;
+    enable32Bit = true;
+  };
+
+  # The systemd-based initrd (default here since this host has a ZFS root --
+  # see modules/disko/baremetal.nix) locks the root account by default, so
+  # sulogin refuses to hand over a shell if something in the initrd (e.g.
+  # the ZFS pool import) fails and it drops to emergency mode -- confirmed
+  # live: it just loops re-entering the target instead of prompting. This
+  # only affects the pre-switch-root initrd shell, not the installed
+  # system's own login, and is worth the tradeoff on a box already reachable
+  # at the physical console.
+  boot.initrd.systemd.emergencyAccess = true;
+}

modules/platforms/lxc.nix

@@ -1,4 +1,4 @@
-{ lib, modulesPath, flakeTarget, ... }:
+{ config, lib, modulesPath, flakeTarget, ... }:
 
 let
   # Bakes this exact flake target's pre-generated SSH host key straight
@@ -14,7 +14,7 @@ let
   # Without this, config.system.build.tarball's built-in system just
   # generates a fresh host key at first boot like any other host would --
   # but sops-nix derives its decryption key from *this* file, and
-  # .sops.yaml only trusts whatever key scripts/sync-host-keys.sh already
+  # .sops.yaml only trusts whatever key scripts/secrets/sync-host-keys.sh already
   # registered for this exact target name. A freshly-generated key can
   # never match that, so every secret (including this host's own login)
   # permanently fails to decrypt. Confirmed live: sops-install-secrets
@@ -26,7 +26,7 @@ let
   hostKeysDir = /. + hostKeysDirStr;
 
   # flakeTarget ("${platform}-${buildType}") comes in via specialArgs from
-  # flake.nix's mkTarget -- exactly the name scripts/sync-host-keys.sh
+  # flake.nix's mkTarget -- exactly the name scripts/secrets/sync-host-keys.sh
   # registers keys under. Deliberately not read back from
   # config.environment.etc."flake-target" (which is set to the same value)
   # -- this module also *contributes* to environment.etc below, and a
@@ -58,8 +58,28 @@ in
     # host.nix declares each host's real hostname (networking.hostName);
     # keep that instead of letting Proxmox's ambient container config win.
     manageHostName = true;
-    # Unprivileged matches how these containers are actually created.
-    privileged = false;
+    # Unprivileged by default -- matches how these containers are actually
+    # created (scripts/proxmox/create-proxmox-resource.sh reads this value
+    # back to decide `pct create`'s --unprivileged flag, so the two stay
+    # in sync).
+    #
+    # lxc-docker is the one exception: the kernel's NFS client doesn't set
+    # FS_USERNS_MOUNT, so mounting NFS from inside *any* non-init user
+    # namespace -- which is exactly what an unprivileged container's
+    # UID-mapped root runs in -- is rejected at the VFS layer with EPERM,
+    # no matter what Proxmox's own `mount=nfs;nfs4` container feature
+    # allows at the AppArmor layer (confirmed live: TCP to the NFS server
+    # succeeds, the server's export table matches the container's IP, and
+    # `mount.nfs: Operation not permitted` still fires immediately with no
+    # corresponding denial anywhere in the server's logs -- a kernel-level
+    # rejection, not a network or export-permission one). Keying off
+    # hostName rather than something docker-build-type-specific because
+    # modules/build-types/docker.nix is also composed for linode-docker/
+    # proxmox-docker, which don't import proxmox-lxc.nix at all --setting
+    # this option there would break their eval with "option does not
+    # exist" regardless of any mkIf guard, since mkIf only makes a value
+    # conditional, not whether the option needs to exist somewhere.
+    privileged = config.networking.hostName == "docker";
   };
 
   boot.loader = {
@@ -86,6 +106,40 @@ in
     };
   };
 
+  # NixOS's etc activation removes any /etc file that was in the previous
+  # generation's environment.etc but is absent from the current one — even
+  # real (non-symlink) copies.  On every routine nixos-rebuild switch/test that
+  # lacks NIXOS_HOST_KEYS_DIR the key is absent from environment.etc, so it
+  # gets removed as "obsolete".  sops-nix derives its age decryption key from
+  # /etc/ssh/ssh_host_ed25519_key; deletion cascades into every sops secret
+  # failing with "Error getting data key: 0 successful groups required, got 0".
+  #
+  # Fix: two activation scripts that bracket the etc step.
+  #   preserveSshHostKey — no deps, runs before etc — saves the live key to
+  #                        /run (tmpfs) before etc can delete it.
+  #   restoreSshHostKey  — deps=[etc], runs after etc — reinstalls the key via
+  #                        `install` (atomic, sets mode) if etc removed it.
+  #                        The resulting file is not registered in environment.etc
+  #                        for either the previous or current generation, so
+  #                        subsequent rebuilds leave it alone permanently.
+  system.activationScripts.preserveSshHostKey = ''
+    if [ -f /etc/ssh/ssh_host_ed25519_key ]; then
+      cp /etc/ssh/ssh_host_ed25519_key /run/sshd-host-key-preserve.tmp
+      cp /etc/ssh/ssh_host_ed25519_key.pub /run/sshd-host-key-preserve.pub.tmp
+    fi
+  '';
+
+  system.activationScripts.restoreSshHostKey = {
+    deps = [ "etc" ];
+    text = ''
+      if [ ! -f /etc/ssh/ssh_host_ed25519_key ] && [ -f /run/sshd-host-key-preserve.tmp ]; then
+        install -m 0600 /run/sshd-host-key-preserve.tmp /etc/ssh/ssh_host_ed25519_key
+        install -m 0644 /run/sshd-host-key-preserve.pub.tmp /etc/ssh/ssh_host_ed25519_key.pub
+      fi
+      rm -f /run/sshd-host-key-preserve.tmp /run/sshd-host-key-preserve.pub.tmp
+    '';
+  };
+
   # virtualisation/proxmox-lxc.nix (imported above) registers the Nix
   # store DB via a systemd service (register-nix-paths) -- it never runs
   # an activation script at all. Confirmed live this means neither

modules/pxe-boot/stage-installer-artifacts.nix

@@ -1,23 +1,32 @@
-{ netbootSystem, ... }:
+{ netbootSystem, netbootMinimalSystem, ... }:
 
 let
   # config.system.build.kernel and .netbootRamdisk are directories, not the
   # files themselves — nixpkgs' own system.build.kexecTree does the same
   # ${...}/<file> dereference for the same reason.
-  inherit (netbootSystem.config.system.boot.loader) kernelFile;
+  mkStageRules = { dirName, system }:
+    let
+      inherit (system.config.system.boot.loader) kernelFile;
+      dir = "/srv/pxe/http/${dirName}";
     in
-{
-  # Builds this flake's own installer netboot image (the same one
-  # `nix build .#pxe` produces) and stages it where menu.ipxe's :nixos
-  # entry expects it, so the pxe-boot host is self-contained — no manual
-  # operator step to populate /srv/pxe/http/nixos after deploy.
-  systemd.tmpfiles.rules = [
+    [
       # Declared here too (not just in build-types/pxe-boot.nix) so this
       # module's C+ rules don't depend on cross-module list-merge ordering —
       # tmpfiles' C type needs the target directory to already exist.
-    "d /srv/pxe/http/nixos 0755 root root -"
-    "C+ /srv/pxe/http/nixos/${kernelFile} 0644 root root - ${netbootSystem.config.system.build.kernel}/${kernelFile}"
-    "C+ /srv/pxe/http/nixos/initrd 0644 root root - ${netbootSystem.config.system.build.netbootRamdisk}/initrd"
-    "C+ /srv/pxe/http/nixos/netboot.ipxe 0644 root root - ${netbootSystem.config.system.build.netbootIpxeScript}/netboot.ipxe"
+      "d ${dir} 0755 root root -"
+      "C+ ${dir}/${kernelFile} 0644 root root - ${system.config.system.build.kernel}/${kernelFile}"
+      "C+ ${dir}/initrd 0644 root root - ${system.config.system.build.netbootRamdisk}/initrd"
+      "C+ ${dir}/netboot.ipxe 0644 root root - ${system.config.system.build.netbootIpxeScript}/netboot.ipxe"
     ];
+in
+{
+  # Builds this flake's own installer netboot image (the same one
+  # `nix build .#pxe` produces) plus the vanilla NixOS minimal netboot image
+  # (`nix build .#pxe-minimal`), and stages both where menu.ipxe's
+  # :auto-installer / :nixos-minimal entries expect them, so the pxe-boot
+  # host is self-contained — no manual operator step to populate
+  # /srv/pxe/http after deploy.
+  systemd.tmpfiles.rules =
+    mkStageRules { dirName = "auto-installer"; system = netbootSystem; }
+    ++ mkStageRules { dirName = "nixos-minimal"; system = netbootMinimalSystem; };
 }

modules/raspi/mount-data.nix

@@ -1,4 +1,4 @@
-{ vars, ... }:
+{ config, lib, vars, ... }:
 
 {
   fileSystems.${vars.raspiMountpoint} = {
@@ -9,6 +9,15 @@
       "_netdev"
       "noatime"
 
+      # Explicitly use NFSv4.2 if supported
+      "nfsvers=4.2"
+    ] ++ lib.optionals (!config.boot.isContainer) [
+      # `x-systemd.automount` never works inside a Linux container (LXC
+      # included) -- confirmed live on lxc-docker: systemd logs "Starting
+      # of <unit>.automount unsupported" and never mounts it. `nofail`
+      # above already keeps boot non-blocking there, so plain eager
+      # mounting is fine.
+
       # Don't mount until first access
       "x-systemd.automount"
 
@@ -17,9 +26,6 @@
 
       # Give the Pi/Tailscale a little time to appear
       "x-systemd.device-timeout=10s"
-
-      # Explicitly use NFSv4.2 if supported
-      "nfsvers=4.2"
     ];
   };
 

modules/tailscale/exit-node.nix

@@ -1,19 +0,0 @@
-_:
-
-{
-  services.tailscale = {
-    enable = true;
-
-    # extraSetFlags (tailscale set, via the always-on tailscaled-set
-    # service), not extraUpFlags -- extraUpFlags is only ever applied by
-    # tailscaled-autoconnect, which itself only runs when
-    # services.tailscale.authKeyFile is set (nothing in this repo sets one,
-    # so tailscale up is a manual, one-time operator step on every host that
-    # uses this service). extraSetFlags has no such gate, so
-    # --advertise-exit-node self-reapplies on every boot once the operator
-    # has authenticated the node once.
-    extraSetFlags = [
-      "--advertise-exit-node"
-    ];
-  };
-}

modules/tailscale/subnet-router.nix

@@ -0,0 +1,15 @@
+_:
+
+{
+  imports = [ ./enable-service.nix ];
+
+  services.tailscale = {
+    # Enables the sysctl forwarding settings subnet routers need;
+    # without this, --advertise-routes has no effect.
+    useRoutingFeatures = "server";
+
+    # Lets peers reach this node directly over the tailscale UDP port
+    # instead of relaying through DERP.
+    openFirewall = true;
+  };
+}

modules/tor/enable-relay.nix

@@ -0,0 +1,35 @@
+{ pkgs, vars, ... }:
+
+{
+  services.tor = {
+    enable = true;
+
+    # Opens settings.ORPort (and DirPort, unset here) in the firewall —
+    # see the nixpkgs tor module's own networking.firewall.mkIf block.
+    openFirewall = true;
+
+    relay = {
+      enable = true;
+      # Plain middle/guard relay, not "exit" — relays onion traffic between
+      # other Tor nodes without ever making requests to the public internet
+      # on a user's behalf, avoiding the abuse complaints and legal exposure
+      # an exit node invites.
+      role = "relay";
+    };
+
+    settings.ORPort = vars.ports.torRelayOrPort;
+
+    # Unix control socket at /run/tor/control (GroupWritable, group "tor")
+    # -- what nyx below actually monitors the relay through. Nyx's own
+    # default control-socket path (/var/run/tor/control) resolves to the
+    # same place, so no extra nyx config is needed.
+    controlSocket.enable = true;
+  };
+
+  # Lets the primary user's shell session read/write the control socket
+  # above without being root -- otherwise nyx fails to authenticate against
+  # it at all.
+  users.users.${vars.primaryUser}.extraGroups = [ "tor" ];
+
+  environment.systemPackages = [ pkgs.nyx ];
+}

remove-sensetive-info-refactor.md

@@ -1,134 +0,0 @@
-# Spec: Remove Sensitive Information from NixOS Flake
-
-## Goal
-
-Every secret currently readable in plaintext anywhere in this repo (working tree *and* git history) gets removed, replaced with `sops-nix`-managed encrypted references, and rotated. When this is done, the repo should be safe to make public without exposing anything about the systems it configures.
-
-Treat this as three sequential milestones. Do not start git history rewriting (Milestone 3) until Milestones 1 and 2 are fully verified and the flake still builds. This should be its own branch (`refactor/secrets`) until fully verified, then merged.
-
----
-
-## Milestone 1 — Audit
-
-Before touching anything, produce a complete inventory. Do not guess at scope — grep the whole tree and the whole history.
-
-1. Run a secret scanner across the working tree and full history. Use both, since they catch different things:
-   - `gitleaks detect --source . -v --log-opts="--all"` (scans history too)
-   - `trufflehog git file://. --since-commit=$(git rev-list --max-parents=0 HEAD) --only-verified=false`
-   If neither is installed, add them via a temporary `nix-shell -p gitleaks trufflehog` — don't install anything globally on the host.
-
-2. Manually grep for the categories below, since scanners miss config-specific patterns:
-   - `hashedPassword`, `password`, `initialPassword`, `initialHashedPassword` in any `users.users.*` block
-   - `age.secrets`, `sops.secrets` (if any partial secrets work already exists — check for it)
-   - PSK / `preSharedKey`, `privateKeyFile` inline values (vs. file references) for WireGuard
-   - `authKey`, `apiToken`, `api_key`, `token =`, `secret =` in service modules (Tailscale, Cloudflare, backup tools, etc.)
-   - SSH private key material: search for `BEGIN OPENSSH PRIVATE KEY` / `BEGIN RSA PRIVATE KEY` literals
-   - TLS cert/key pairs committed under e.g. `secrets/`, `certs/`, `pki/`
-   - Real name, personal email, home address, or anything in comments/hostnames that maps a machine to your physical identity or network layout (e.g. hostnames like `wayne-desktop`, static LAN IPs, ISP-identifying info)
-   - `.env` files, `secrets.nix`, `secrets.yaml`, or any file that looks like it was meant to be gitignored but wasn't
-
-3. Produce `secrets-inventory.md` (temporary, delete before finishing) listing: file path, line, secret type, and which host/service it belongs to. This becomes the checklist for Milestone 2 — every row must be either migrated to sops or deleted, with nothing left unaccounted for.
-
----
-
-## Milestone 2 — Migrate to sops-nix
-
-### 2.1 Set up sops-nix
-
-1. Add the flake input:
-   ```nix
-   sops-nix.url = "github:Mic92/sops-nix";
-   sops-nix.inputs.nixpkgs.follows = "nixpkgs";
-   ```
-2. Import `sops-nix.nixosModules.sops` into each host's module list (or into a shared `common.nix` if all hosts use it).
-3. Generate an age keypair **per host** (not one shared key for everything — a compromised host shouldn't decrypt every other host's secrets):
-   ```
-   nix-shell -p age --run "age-keygen -o /var/lib/sops-nix/key.txt"
-   ```
-   Print the public key (`age-keygen -y`) for each host — you'll need it for `.sops.yaml`.
-4. Also generate one age key for yourself (your admin workstation) so you can edit secrets without needing to SSH into a host: store it at `~/.config/sops/age/keys.txt`, back it up somewhere outside this repo (password manager, offline). **If this key is lost, every secret encrypted with it is unrecoverable — losing the age key is equivalent to losing the secrets.**
-5. Create `.sops.yaml` at the repo root defining creation rules: which age public keys can decrypt which secrets files, keyed by path regex, so e.g. `secrets/hostA.yaml` is decryptable by your admin key + hostA's key, `secrets/hostB.yaml` by your admin key + hostB's key.
-
-### 2.2 Migrate each secret category from the inventory
-
-For each row in `secrets-inventory.md`:
-
-- **Password hashes**: generate hash with `mkpasswd -m sha-512` (or `bcrypt` if your setup wants that), store under `sops.secrets."<name>/hashedPassword"`, reference via `users.users.<name>.hashedPasswordFile = config.sops.secrets."<name>/hashedPassword".path;`. Do not put the *plaintext* password anywhere, only the hash, and only the hash goes into the encrypted sops file.
-- **API tokens / auth keys**: move the raw value into the per-host sops YAML, reference in the module via `config.sops.secrets."<service>/token".path` — most NixOS service modules that take a token also accept a `*File` variant (e.g. `environmentFile`, `tokenFile`); use that instead of passing the value directly.
-- **Private keys / certs**: move the PEM/key content wholesale into a sops secret, output as a file with appropriate `sops.secrets.<name>.path`, `owner`, `mode`, `restartUnits` so the depending service (sshd, wireguard, nginx) reloads when the secret changes.
-- **Personal/identifying info**: this doesn't belong in sops (it's not "secret," it's just information you don't want public). Replace real names/emails with placeholders or move to a small untracked `local.nix` that's `.gitignore`'d and imported conditionally, with a documented template (`local.nix.example`) committed instead.
-
-### 2.3 Verify before moving on
-
-- `nixos-rebuild dry-build --flake .#<host>` succeeds for every host.
-- `sudo nixos-rebuild switch --flake .#<host>` on at least one real machine (or a VM) confirms secrets decrypt and services start.
-- Confirm decrypted secrets land under `/run/secrets/` (not the Nix store — anything placed in `/nix/store` is world-readable by design, so sops-nix's runtime-only placement is the whole point; double check no module accidentally pulls a secret path into a store-built config file).
-- Re-run the grep/scanner sweep from Milestone 1 against the *working tree only* (not history yet) — it should now come back clean.
-
----
-
-## Milestone 3 — Scrub git history
-
-Do this only after Milestone 2 is merged to your main branch and confirmed working, since it rewrites every commit SHA from the point of the earliest offending commit onward.
-
-**This is destructive and irreversible on your local clone. Back up first:**
-```
-cp -r /path/to/nixos-repo /path/to/nixos-repo-backup-$(date +%F)
-```
-
-1. Install `git-filter-repo` (not the older `git filter-branch` / BFG — filter-repo is the currently maintained, faster, safer tool):
-   ```
-   nix-shell -p git-filter-repo
-   ```
-2. Use the `secrets-inventory.md` list to build a list of literal strings/paths to strip. Two approaches, use both:
-   - Path-based: if whole files were secret (e.g. `secrets.nix`, a `.env`, a private key file), remove them entirely from history:
-     ```
-     git filter-repo --path secrets.nix --path .env --invert-paths
-     ```
-   - Value-based: for secrets embedded inline in files you're keeping (not deleting the whole file), use `--replace-text` with a file listing each literal secret string to replace with `***REMOVED***`:
-     ```
-     git filter-repo --replace-text expressions.txt
-     ```
-3. After filtering, verify: run the Milestone 1 scanners again against full history (`--log-opts="--all"`). They must come back clean.
-4. Force-push the rewritten history:
-   ```
-   git push origin --force --all
-   git push origin --force --tags
-   ```
-5. **Every other clone of this repo (other machines, WSL instances, CI) must be deleted and re-cloned fresh** — a `git pull` against rewritten history will not work cleanly and risks resurrecting the old commits. Don't try to reconcile old clones; throw them away and re-clone.
-6. If this repo has ever been pushed to a public host (GitHub, etc.) or a fork/mirror exists, treat every secret that was ever in history as **permanently compromised regardless of the rewrite** — caches, forks, and Wayback-style archives can retain old commits indefinitely. History scrubbing prevents *future* exposure via `git clone`; it does not undo past exposure.
-
----
-
-## Milestone 4 — Rotate everything
-
-Because the secrets were exposed in history (even briefly, even in a private repo), the migration is not complete until every credential in the inventory has been **rotated**, not just re-encrypted. Re-encrypting an already-leaked value protects it going forward but doesn't undo the leak.
-
-For each row in the original inventory:
-- Password hashes → change the actual account password, regenerate the hash, update the sops file.
-- API tokens/auth keys → revoke the old token in the issuing service's dashboard (Cloudflare, Tailscale, backup provider, etc.) and generate a new one.
-- SSH/WireGuard private keys → generate new keypairs, update the corresponding public key wherever it's trusted (authorized_keys, peer configs, etc.), retire the old ones.
-- TLS certs → reissue if the private key was exposed.
-
-Keep `secrets-inventory.md` open during this step and check off each row as rotated. Delete the file only once every row is checked off — it should not be committed.
-
----
-
-## Ongoing prevention
-
-Add a pre-commit hook (or a `nix flake check` step) running `gitleaks protect --staged` so a secret can't be committed again by accident. Document in the repo README (briefly) that new secrets go through `sops <file>` to edit, never as plaintext in a tracked file.
-
----
-
-## Definition of done
-
-- [ ] Milestone 1 inventory complete and reviewed
-- [ ] All hosts have per-host age keys; admin key backed up outside the repo
-- [ ] Every inventoried secret migrated to sops-nix, referenced via `*File`/`sops.secrets.*.path`, nothing plaintext in the working tree
-- [ ] `nixos-rebuild dry-build` and at least one real `switch` verified per host
-- [ ] Working-tree scanner sweep clean
-- [ ] History rewritten with `git-filter-repo`, force-pushed, full-history scanner sweep clean
-- [ ] All other clones deleted and re-cloned from the rewritten history
-- [ ] Every credential in the original inventory rotated (not just re-encrypted)
-- [ ] Pre-commit secret scanning hook added
-- [ ] `secrets-inventory.md` deleted from the working directory (never committed)

scripts/bump-nixpkgs-release.sh

@@ -129,5 +129,6 @@ echo "flake.lock still points at the old input revisions until refreshed. Either
 echo "  nix flake update nixpkgs home-manager   # just these two inputs"
 echo "  nix flake update                        # everything — see docs/flake-lock-automation.md"
 echo
-echo "Then run 'bash scripts/codex-maintenance.sh dry-run' before committing —"
-echo "a channel bump can shift option defaults across every host."
+echo "Then run 'bash scripts/codex-maintenance.sh --full-check --dry-run' before"
+echo "committing — a channel bump can shift option defaults across every host,"
+echo "and only --dry-run actually builds anything to catch that."

scripts/codex-maintenance.sh

@@ -1,22 +1,73 @@
 #!/usr/bin/env bash
+# Validation entry point for CI and local/agent review.
+#
+# Default mode (what CI runs on every push/PR): fmt-check, statix, and eval
+# are scoped to files that actually changed against a base ref, plus
+# whichever hosts/packages those changes can affect. This exists because
+# the unscoped sweep below is slow enough to time out CI runners -- see
+# --full-check.
+#
+# --full-check: the historical full sweep (every host, every package,
+# fmt --check ./statix check . over the whole tree). Slow -- minutes, not
+# seconds. CI never passes this; run it locally before a release or after
+# touching modules/common/*, flake.nix, or variables.nix if you want extra
+# confidence beyond what the changed-files scope already covers for those
+# paths (see below).
+#
+# --dry-run: adds `nix build --dry-run --no-link` for whatever scope is
+# active (changed-files scope by default, full scope under --full-check).
+#
+# Per-host/per-package eval and dry-run build calls run concurrently (see
+# scripts/lib/nix-parallel.sh) since they're independent of each other.
+# Concurrency defaults to core count capped by available memory (~1GB/job)
+# rather than plain core count, since each concurrent `nix eval` evaluates a
+# whole NixOS system closure and can OOM a small/memory-constrained CI
+# runner otherwise; override via NIX_PARALLEL_JOBS if a runner has more (or
+# less) room than that estimate assumes.
 set -euo pipefail
 
-export NIX_CONFIG="${NIX_CONFIG:-}
-experimental-features = nix-command flakes
-accept-flake-config = false
-warn-dirty = false
-"
+script_dir="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+# shellcheck source=lib/nix-bootstrap.sh
+source "${script_dir}/lib/nix-bootstrap.sh"
+# shellcheck source=lib/nix-eval.sh
+source "${script_dir}/lib/nix-eval.sh"
+# shellcheck source=lib/nix-parallel.sh
+source "${script_dir}/lib/nix-parallel.sh"
 
-MODE="${1:-validate}"
+repo_root="$(cd "${script_dir}/.." && pwd)"
+cd "$repo_root"
 
-ensure_nix_profile() {
-  if [ -f /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh ]; then
-    . /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh
-  elif [ -f "$HOME/.nix-profile/etc/profile.d/nix.sh" ]; then
-    . "$HOME/.nix-profile/etc/profile.d/nix.sh"
-  fi
+full_check=false
+dry_run=false
+
+usage() {
+  cat <<'EOF'
+Usage: scripts/codex-maintenance.sh [--full-check] [--dry-run]
+
+  --full-check  Run the full sweep: fmt-check and statix over the whole
+                repo, eval every host and package. Slow. Never run by CI.
+  --dry-run     Additionally run `nix build --dry-run --no-link` for
+                whatever scope is active.
+
+With neither flag (the CI default), fmt-check/statix/eval are scoped to
+files changed against a base ref (env MAINT_BASE_SHA, else the PR base,
+else HEAD^), plus the hosts/packages those changes can affect.
+EOF
 }
 
+for arg in "$@"; do
+  case "$arg" in
+    --full-check) full_check=true ;;
+    --dry-run) dry_run=true ;;
+    -h|--help) usage; exit 0 ;;
+    *)
+      echo "Unknown argument: $arg" >&2
+      usage >&2
+      exit 1
+      ;;
+  esac
+done
+
 ensure_nix_profile
 
 if ! command -v nix >/dev/null 2>&1; then
@@ -24,13 +75,6 @@ if ! command -v nix >/dev/null 2>&1; then
   exit 127
 fi
 
-hosts_json="$(nix eval --json --no-use-registries --no-accept-flake-config .#nixosConfigurations --apply builtins.attrNames)"
-hosts="$(echo "$hosts_json" | jq -r '.[]')"
-
-echo "Hosts:"
-echo "$hosts"
-
-echo
 echo "Checking for obvious committed secrets..."
 if grep -RInE 'github_pat_|ghp_|access-tokens|hashedPassword[[:space:]]*=' \
   --exclude-dir=.git \
@@ -42,71 +86,235 @@ else
   echo "No obvious token patterns found."
 fi
 
+mapfile -t all_hosts < <(list_flake_targets .)
+mapfile -t all_packages < <(nix eval --json "${NIX_EVAL_FLAGS[@]}" .#packages.x86_64-linux --apply builtins.attrNames | jq -r '.[]')
+
+# host_targets_for_dir <hosts-subdir-name>
+# Prints the nixosConfigurations target names whose hostPath is
+# ./hosts/<dir>/host.nix, derived straight from flake.nix's generatedTargets
+# (one mkTarget { ... } call per line) rather than a hand-maintained table,
+# so it can't drift the way a copied mapping would.
+host_targets_for_dir() {
+  local dir="$1"
+  grep -oE '^[[:space:]]*[A-Za-z0-9_-]+ = mkTarget \{[^}]*hostPath = \./hosts/'"${dir}"'/host\.nix;[^}]*\};' flake.nix \
+    | sed -E 's/^[[:space:]]*([A-Za-z0-9_-]+) = mkTarget.*/\1/' \
+    || true
+}
+
+declare -a changed_files=()
+scope_desc="full repo"
+
+if ! $full_check; then
+  resolve_base_ref() {
+    if [[ -n "${MAINT_BASE_SHA:-}" ]] && git cat-file -e "${MAINT_BASE_SHA}^{commit}" 2>/dev/null; then
+      echo "$MAINT_BASE_SHA"
+      return
+    fi
+    if git rev-parse --verify -q HEAD^ >/dev/null 2>&1; then
+      echo "HEAD^"
+      return
+    fi
+    git hash-object -t tree /dev/null
+  }
+
+  base_ref="$(resolve_base_ref)"
+  echo
+  echo "Changed-files scope: diffing against ${base_ref}"
+  mapfile -t changed_files < <(git diff --name-only --diff-filter=ACMR "$base_ref" -- . | sort -u)
+
+  if [[ ${#changed_files[@]} -eq 0 ]]; then
+    echo "No changed files detected."
+  else
+    printf '  %s\n' "${changed_files[@]}"
+  fi
+  scope_desc="changed files only (base: ${base_ref})"
+fi
+
+# Whole-tree fmt/lint always run under --full-check; otherwise scoped below.
+declare -a changed_nix_files=()
+for f in "${changed_files[@]:-}"; do
+  [[ "$f" == *.nix && -f "$f" ]] && changed_nix_files+=("$f")
+done
+
 echo
 echo "Checking Nix formatting with nixpkgs-fmt..."
-nix run --no-use-registries --no-accept-flake-config github:NixOS/nixpkgs/nixos-25.11#nixpkgs-fmt -- --check .
+if $full_check; then
+  nix run "${NIX_EVAL_FLAGS[@]}" github:NixOS/nixpkgs/nixos-25.11#nixpkgs-fmt -- --check .
+elif [[ ${#changed_nix_files[@]} -gt 0 ]]; then
+  nix run "${NIX_EVAL_FLAGS[@]}" github:NixOS/nixpkgs/nixos-25.11#nixpkgs-fmt -- --check "${changed_nix_files[@]}"
+else
+  echo "No changed .nix files; skipping."
+fi
 
 echo
 echo "Running statix lint..."
-nix run --no-use-registries --no-accept-flake-config github:NixOS/nixpkgs/nixos-25.11#statix -- check .
+if $full_check; then
+  nix run "${NIX_EVAL_FLAGS[@]}" github:NixOS/nixpkgs/nixos-25.11#statix -- check .
+elif [[ ${#changed_nix_files[@]} -gt 0 ]]; then
+  for f in "${changed_nix_files[@]}"; do
+    nix run "${NIX_EVAL_FLAGS[@]}" github:NixOS/nixpkgs/nixos-25.11#statix -- check "$f"
+  done
+else
+  echo "No changed .nix files; skipping."
+fi
+
+# Figure out which hosts/packages this run needs to eval (and, under
+# --dry-run, build). full_check always means "everything"; otherwise a
+# change to flake.nix/flake.lock/variables.nix/modules/common/* (repo-wide
+# inputs) or to any other modules/*.nix outside platforms//build-types
+# (whose blast radius isn't safely inferable from the path alone -- see
+# CLAUDE.md's "Grep modules/build-types/*.nix for each build type's imports
+# list") also falls back to everything, on the same reasoning CLAUDE.md
+# already gives interactive sessions for when to run the full sweep.
+# Anything more targeted -- a host.nix, a platform module, a build-type
+# module -- narrows to just the hosts it can affect.
+declare -A affected_hosts=()
+eval_packages=false
+
+if $full_check; then
+  for h in "${all_hosts[@]}"; do affected_hosts[$h]=1; done
+  eval_packages=true
+else
+  full_fallback=false
+  for f in "${changed_files[@]:-}"; do
+    case "$f" in
+      flake.nix|flake.lock|variables.nix|modules/common/*)
+        full_fallback=true
+        ;;
+    esac
+  done
+
+  if ! $full_fallback; then
+    for f in "${changed_files[@]:-}"; do
+      case "$f" in
+        hosts/*/*)
+          hostdir="${f#hosts/}"
+          hostdir="${hostdir%%/*}"
+          while IFS= read -r t; do
+            [[ -n "$t" ]] && affected_hosts[$t]=1
+          done < <(host_targets_for_dir "$hostdir")
+          ;;
+        modules/platforms/*.nix)
+          platform="$(basename "$f" .nix)"
+          for h in "${all_hosts[@]}"; do
+            [[ "$h" == "${platform}-"* ]] && affected_hosts[$h]=1
+          done
+          ;;
+        modules/build-types/*.nix)
+          buildtype="$(basename "$f" .nix)"
+          for h in "${all_hosts[@]}"; do
+            [[ "$h" == *"-${buildtype}" ]] && affected_hosts[$h]=1
+          done
+          ;;
+        modules/installer/*)
+          # iso.nix (imported by both the "installer" nixosConfigurations
+          # target and netbootSystem, which backs packages.pxe) pulls in
+          # common.nix, so a common.nix change reaches all three.
+          affected_hosts[installer]=1
+          eval_packages=true
+          ;;
+        modules/pxe-boot/*)
+          # stage-installer-artifacts.nix is imported by
+          # modules/build-types/pxe-boot.nix only -- same blast radius as a
+          # build-types/*.nix change, not a packages one.
+          for h in "${all_hosts[@]}"; do
+            [[ "$h" == *"-pxe-boot" ]] && affected_hosts[$h]=1
+          done
+          ;;
+        modules/*)
+          full_fallback=true
+          ;;
+      esac
+    done
+  fi
+
+  if $full_fallback; then
+    echo
+    echo "Changed files affect shared config; falling back to evaluating every host/package."
+    for h in "${all_hosts[@]}"; do affected_hosts[$h]=1; done
+    eval_packages=true
+  fi
+fi
+
+mapfile -t hosts < <(for h in "${!affected_hosts[@]}"; do echo "$h"; done | sort)
 
 echo
-echo "Evaluating host toplevel derivations..."
-for host in $hosts; do
-  echo "==> $host"
-  nix eval --raw --no-use-registries --no-accept-flake-config ".#nixosConfigurations.${host}.config.system.build.toplevel.drvPath"
+echo "Checking nix-cache host key for drift..."
+if bash "${script_dir}/secrets/sync-nix-cache-host-key.sh" --check; then
+  :
+else
+  drift_status=$?
+  if [[ "$drift_status" -eq 2 ]]; then
+    echo "nix-cache unreachable from here -- skipping host-key drift check."
+  else
+    echo "WARNING: nix-cache's host key has drifted from variables.nix (see above)." >&2
+    echo "  Run 'bash scripts/secrets/sync-nix-cache-host-key.sh' to fix." >&2
+  fi
+fi
 
+echo
+if [[ ${#hosts[@]} -eq 0 ]]; then
+  echo "No hosts affected by changed files; skipping host eval."
+else
+  echo "Evaluating host toplevel derivations (${scope_desc}, up to ${NIX_PARALLEL_JOBS} at a time)..."
   # lxc-* hosts deploy via a directly pct-restore-able tarball instead of
   # nixos-install (see docs/auto-installer.md); proxmox-* hosts can
   # alternatively be built as a standalone disk image (see
   # docs/proxmox-images.md). Both are otherwise-unvalidated buildable
   # surface, easy to silently break without this.
+  declare -a host_eval_jobs=()
+  for host in "${hosts[@]}"; do
+    host_eval_jobs+=("${host}${NIX_PARALLEL_SEP}.#nixosConfigurations.${host}.config.system.build.toplevel.drvPath")
     case "$host" in
       lxc-*)
-      echo "==> $host (tarball)"
-      nix eval --raw --no-use-registries --no-accept-flake-config ".#nixosConfigurations.${host}.config.system.build.tarball.drvPath"
+        host_eval_jobs+=("${host} (tarball)${NIX_PARALLEL_SEP}.#nixosConfigurations.${host}.config.system.build.tarball.drvPath")
         ;;
       proxmox-*)
-      echo "==> $host (diskoImagesScript)"
-      nix eval --raw --no-use-registries --no-accept-flake-config ".#nixosConfigurations.${host}.config.system.build.diskoImagesScript.drvPath"
+        host_eval_jobs+=("${host} (diskoImagesScript)${NIX_PARALLEL_SEP}.#nixosConfigurations.${host}.config.system.build.diskoImagesScript.drvPath")
         ;;
     esac
   done
+  run_nix_parallel host_eval_jobs eval --raw "${NIX_EVAL_FLAGS[@]}"
+fi
 
 echo
-echo "Evaluating buildable packages..."
-packages_json="$(nix eval --json --no-use-registries --no-accept-flake-config .#packages.x86_64-linux --apply builtins.attrNames)"
-packages="$(echo "$packages_json" | jq -r '.[]')"
-for pkg in $packages; do
-  echo "==> packages.x86_64-linux.${pkg}"
-  nix eval --raw --no-use-registries --no-accept-flake-config ".#packages.x86_64-linux.${pkg}"
+if ! $eval_packages; then
+  echo "No packages affected by changed files; skipping package eval."
+else
+  echo "Evaluating buildable packages (up to ${NIX_PARALLEL_JOBS} at a time)..."
+  declare -a package_eval_jobs=()
+  for pkg in "${all_packages[@]}"; do
+    package_eval_jobs+=("packages.x86_64-linux.${pkg}${NIX_PARALLEL_SEP}.#packages.x86_64-linux.${pkg}")
   done
+  run_nix_parallel package_eval_jobs eval --raw "${NIX_EVAL_FLAGS[@]}"
+fi
 
-if [[ "$MODE" == "dry-run" ]]; then
+if $dry_run; then
   echo
-  echo "Running dry-run builds for all hosts. This will not create result symlinks."
-  for host in $hosts; do
-    echo "==> Dry-run build: $host"
-    nix build --dry-run --no-link --no-use-registries --no-accept-flake-config ".#nixosConfigurations.${host}.config.system.build.toplevel"
-
+  echo "Running dry-run builds for the active scope (up to ${NIX_PARALLEL_JOBS} at a time). This will not create result symlinks."
+  declare -a host_build_jobs=()
+  for host in "${hosts[@]:-}"; do
+    host_build_jobs+=("Dry-run build: ${host}${NIX_PARALLEL_SEP}.#nixosConfigurations.${host}.config.system.build.toplevel")
     case "$host" in
       lxc-*)
-        echo "==> Dry-run build: $host (tarball)"
-        nix build --dry-run --no-link --no-use-registries --no-accept-flake-config ".#nixosConfigurations.${host}.config.system.build.tarball"
+        host_build_jobs+=("Dry-run build: ${host} (tarball)${NIX_PARALLEL_SEP}.#nixosConfigurations.${host}.config.system.build.tarball")
         ;;
       proxmox-*)
-        echo "==> Dry-run build: $host (diskoImagesScript)"
-        nix build --dry-run --no-link --no-use-registries --no-accept-flake-config ".#nixosConfigurations.${host}.config.system.build.diskoImagesScript"
+        host_build_jobs+=("Dry-run build: ${host} (diskoImagesScript)${NIX_PARALLEL_SEP}.#nixosConfigurations.${host}.config.system.build.diskoImagesScript")
         ;;
     esac
   done
+  run_nix_parallel host_build_jobs build --dry-run --no-link "${NIX_EVAL_FLAGS[@]}"
 
+  if $eval_packages; then
     echo
-  echo "Running dry-run builds for all packages."
-  for pkg in $packages; do
-    echo "==> Dry-run build: packages.x86_64-linux.${pkg}"
-    nix build --dry-run --no-link --no-use-registries --no-accept-flake-config ".#packages.x86_64-linux.${pkg}"
+    echo "Running dry-run builds for packages."
+    declare -a package_build_jobs=()
+    for pkg in "${all_packages[@]}"; do
+      package_build_jobs+=("Dry-run build: packages.x86_64-linux.${pkg}${NIX_PARALLEL_SEP}.#packages.x86_64-linux.${pkg}")
     done
+    run_nix_parallel package_build_jobs build --dry-run --no-link "${NIX_EVAL_FLAGS[@]}"
+  fi
 fi
 
 echo

scripts/codex-setup.sh

@@ -1,19 +1,11 @@
 #!/usr/bin/env bash
 set -euo pipefail
 
-export NIX_CONFIG="${NIX_CONFIG:-}
-experimental-features = nix-command flakes
-accept-flake-config = false
-warn-dirty = false
-"
-
-ensure_nix_profile() {
-  if [ -f /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh ]; then
-    . /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh
-  elif [ -f "$HOME/.nix-profile/etc/profile.d/nix.sh" ]; then
-    . "$HOME/.nix-profile/etc/profile.d/nix.sh"
-  fi
-}
+script_dir="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+# shellcheck source=lib/nix-bootstrap.sh
+source "${script_dir}/lib/nix-bootstrap.sh"
+# shellcheck source=lib/nix-eval.sh
+source "${script_dir}/lib/nix-eval.sh"
 
 install_nix_if_missing() {
   if command -v nix >/dev/null 2>&1; then
@@ -49,6 +41,17 @@ warn-dirty = false
 build-users-group = nixbld
 EOF
 
+    # The official installer's single-user root path still shells out to
+    # `sudo` to create /nix even though it already knows it's running as
+    # root -- confirmed live against a sudo-less minimal Debian/Proxmox
+    # node, where it fails with "sudo: not found" and prints this exact
+    # mkdir/chown as the manual fix. Pre-create it so that branch of the
+    # installer is skipped entirely.
+    if [ ! -d /nix ]; then
+      mkdir -m 0755 /nix
+      chown root /nix
+    fi
+
     sh <(curl -L https://nixos.org/nix/install) --no-daemon
   else
     sh <(curl -L https://nixos.org/nix/install) --no-daemon
@@ -65,6 +68,7 @@ cat > "$HOME/.config/nix/nix.conf" <<'EOF'
 experimental-features = nix-command flakes
 accept-flake-config = false
 warn-dirty = false
+build-users-group =
 EOF
 
 echo "Nix version:"
@@ -79,13 +83,6 @@ if ! command -v jq >/dev/null 2>&1; then
 fi
 
 echo "Available NixOS hosts:"
-hosts="$(nix eval --json --no-use-registries --no-accept-flake-config .#nixosConfigurations --apply builtins.attrNames | jq -r '.[]')"
-echo "$hosts"
+list_flake_targets .
 
-echo "Evaluating all host toplevel derivations..."
-for host in $hosts; do
-  echo "==> Evaluating $host"
-  nix eval --raw --no-use-registries --no-accept-flake-config ".#nixosConfigurations.${host}.config.system.build.toplevel.drvPath"
-done
-
-echo "Codex setup complete."
+echo "Codex setup complete. Run bash scripts/codex-maintenance.sh to validate changes."

scripts/create-proxmox-resource.sh

@@ -1,556 +0,0 @@
-#!/usr/bin/env bash
-# Creates new Proxmox VMs/LXC containers from this flake, and reconfigures
-# existing ones -- the manual workflows in docs/proxmox-images.md (VM) and
-# docs/auto-installer.md's "LXC hosts" section (container), automated.
-#
-# Usage:
-#   scripts/create-proxmox-resource.sh --type lxc|vm --host <name> [options]
-#   scripts/create-proxmox-resource.sh --type lxc|vm --list
-#   scripts/create-proxmox-resource.sh --modify --vmid <n> [--cores N] [--memory MB] [--grow-disk GB]
-#
-# SAFETY:
-#   - The default (create) mode only ever creates a NEW resource -- it
-#     refuses to run if the target VMID already exists on the node, or if
-#     a VM/CT identified as --host already exists under any other VMID
-#     (checked live against the node; --allow-duplicate-host overrides).
-#   - --modify only ever touches a resource you name explicitly via
-#     --vmid, shows exactly what will change first, and (outside
-#     --dry-run) always requires typing that VMID back to confirm before
-#     anything is sent to the node. There is no bulk/implicit modify.
-#   - Neither mode can start/stop/delete a resource. Not implemented on
-#     purpose -- ask before adding it.
-#
-# See --help for the full option list.
-set -euo pipefail
-
-repo_root="$(cd "$(dirname "$0")/.." && pwd)"
-# shellcheck source=env.sh
-source "${repo_root}/scripts/env.sh"
-
-sync_keys="${repo_root}/scripts/sync-host-keys.sh"
-
-usage() {
-  cat <<EOF
-Usage: $0 --type lxc|vm --host <name> [options]      (create)
-       $0 --type lxc|vm --list                        (list --host values)
-       $0 --modify --vmid <n> [options]                (reconfigure)
-
-Create mode (default):
-  --type lxc|vm        lxc = container, built as a CT template tarball.
-                        vm  = VM, built as a Disko .raw disk image (UEFI/OVMF).
-  --host <name>         Which host identity to deploy -- matches
-                        config.networking.hostName (server, docker,
-                        nix-cache, nixos, pxe-boot, nix-minimal). Use
-                        --list to see what's available for --type.
-  --name <name>          Proxmox display name/hostname (default: --host's
-                          value, e.g. nix-cache -- for lxc this becomes the
-                          guest's real networking.hostName too, since
-                          proxmoxLXC.manageHostName pulls it from Proxmox's
-                          own container config, so it must match host.nix
-                          regardless of build type)
-  --vmid <n>              Numeric VMID (default: next free, via
-                          \`pvesh get /cluster/nextid\` on the node).
-                          Refuses to run if this ID already exists.
-  --disk-size <GB>           lxc only: rootfs size for \`pct create\`
-                              (default: \$PROXMOX_DEFAULT_LXC_DISK_GB, ${PROXMOX_DEFAULT_LXC_DISK_GB}).
-  --image <path>              Use this local image/tarball instead of
-                              checking the node / building one from the flake.
-  --force-rebuild                Skip the "does the node already have this
-                                  image" check -- always build fresh and
-                                  overwrite what's there.
-  --allow-duplicate-host        Required if a VM/CT identified as --host
-                                already exists on the node (checked live via
-                                qm/pct, not any file in this repo) --
-                                otherwise refused, since it'd share that
-                                host's hostName/hostId.
-
-Modify mode (reconfigure an EXISTING resource -- requires --modify):
-  --modify                Switch to modify mode.
-  --vmid <n>                Required: which existing resource to change.
-                            Type/VM-vs-CT is auto-detected on the node.
-  --grow-disk <GB>            Grow the primary disk by this many GB
-                              (qm/pct resize; Proxmox only supports
-                              growing, never shrinking, an existing disk).
-  At least one of --cores / --memory / --grow-disk is required. Always
-  prints the current -> new values and requires typing the VMID back to
-  confirm, even outside --dry-run.
-
-Shared:
-  --cores <n>              create: default \$PROXMOX_DEFAULT_CORES (${PROXMOX_DEFAULT_CORES}).
-                            modify: omit to leave unchanged.
-  --memory <MB>              create: default \$PROXMOX_DEFAULT_MEMORY_MB (${PROXMOX_DEFAULT_MEMORY_MB}).
-                              modify: omit to leave unchanged.
-  --swap <MB>                 lxc only, create time: \`--memory\` doesn't
-                              touch swap -- it silently stays at Proxmox's
-                              own 512M default otherwise. (default: matches
-                              whatever --memory resolves to)
-  --storage <pool>              (default: \$PROXMOX_STORAGE, ${PROXMOX_STORAGE})
-  --iso-storage <pool>            (default: \$PROXMOX_ISO_STORAGE, ${PROXMOX_ISO_STORAGE})
-  --bridge <bridge>                (default: \$PROXMOX_BRIDGE, ${PROXMOX_BRIDGE})
-  --node <host>                     Proxmox node to SSH into (default:
-                                    \$PROXMOX_HOST, ${PROXMOX_HOST})
-  --dry-run                           Print the full plan; touch nothing
-                                      local or remote, no prompts.
-  -h, --help
-
-Config for --storage/--bridge/--node/etc. lives in scripts/env.sh -- edit
-that instead of passing the same flag every time.
-EOF
-}
-
-dry_run=0
-modify=0
-type=""
-host=""
-name=""
-vmid=""
-cores=""
-memory=""
-swap=""
-disk_size=""
-grow_disk=""
-image=""
-storage="$PROXMOX_STORAGE"
-iso_storage="$PROXMOX_ISO_STORAGE"
-bridge="$PROXMOX_BRIDGE"
-node="$PROXMOX_HOST"
-do_list=0
-allow_duplicate_host=0
-force_rebuild=0
-
-while [[ $# -gt 0 ]]; do
-  case "$1" in
-  --type) type="$2"; shift 2 ;;
-  --host) host="$2"; shift 2 ;;
-  --name) name="$2"; shift 2 ;;
-  --vmid) vmid="$2"; shift 2 ;;
-  --cores) cores="$2"; shift 2 ;;
-  --memory) memory="$2"; shift 2 ;;
-  --swap) swap="$2"; shift 2 ;;
-  --disk-size) disk_size="$2"; shift 2 ;;
-  --grow-disk) grow_disk="$2"; shift 2 ;;
-  --image) image="$2"; shift 2 ;;
-  --storage) storage="$2"; shift 2 ;;
-  --iso-storage) iso_storage="$2"; shift 2 ;;
-  --bridge) bridge="$2"; shift 2 ;;
-  --node) node="$2"; shift 2 ;;
-  --list) do_list=1; shift ;;
-  --allow-duplicate-host) allow_duplicate_host=1; shift ;;
-  --force-rebuild) force_rebuild=1; shift ;;
-  --modify) modify=1; shift ;;
-  --dry-run) dry_run=1; shift ;;
-  -h | --help) usage; exit 0 ;;
-  *) echo "Unknown option: $1" >&2; usage >&2; exit 1 ;;
-  esac
-done
-
-ssh_target="${PROXMOX_SSH_USER}@${node}"
-
-remote() {
-  if [[ "$dry_run" -eq 1 ]]; then
-    echo "[dry-run] ssh ${ssh_target} -- $*"
-  else
-    ssh "$ssh_target" "$@"
-  fi
-}
-
-# ============================================================ modify mode
-cmd_modify() {
-  if [[ -z "$vmid" ]]; then
-    echo "ERROR: --modify requires --vmid." >&2
-    exit 1
-  fi
-  if [[ -z "$cores" && -z "$memory" && -z "$grow_disk" ]]; then
-    echo "ERROR: --modify needs at least one of --cores / --memory / --grow-disk." >&2
-    exit 1
-  fi
-
-  echo "Looking up VMID ${vmid} on ${node}..."
-  local kind current_cores current_memory disk_key
-  if ssh "$ssh_target" "qm status ${vmid}" >/dev/null 2>&1; then
-    kind="vm"
-    disk_key="scsi0"
-  elif ssh "$ssh_target" "pct status ${vmid}" >/dev/null 2>&1; then
-    kind="lxc"
-    disk_key="rootfs"
-  else
-    echo "ERROR: VMID ${vmid} doesn't exist on ${node} -- nothing to modify." >&2
-    exit 1
-  fi
-
-  local config_cmd="qm config ${vmid}"
-  [[ "$kind" == "lxc" ]] && config_cmd="pct config ${vmid}"
-  local current_config
-  current_config="$(ssh "$ssh_target" "$config_cmd")"
-  current_cores="$(echo "$current_config" | grep -oP '^cores:\s*\K\S+' || echo '?')"
-  current_memory="$(echo "$current_config" | grep -oP '^memory:\s*\K\S+' || echo '?')"
-
-  echo
-  echo "VMID ${vmid} is a ${kind} on ${node}. Planned changes:"
-  [[ -n "$cores" ]] && echo "  cores:  ${current_cores} -> ${cores}"
-  [[ -n "$memory" ]] && echo "  memory: ${current_memory} MB -> ${memory} MB"
-  [[ -n "$grow_disk" ]] && echo "  ${disk_key}: grow by +${grow_disk}G (Proxmox can only grow, not shrink, an existing disk)"
-
-  if [[ "$dry_run" -eq 1 ]]; then
-    echo
-    echo "[dry-run] Nothing was changed."
-    return
-  fi
-
-  echo
-  read -rp "Type the VMID (${vmid}) to confirm these changes: " confirm
-  if [[ "$confirm" != "$vmid" ]]; then
-    echo "Cancelled -- input didn't match ${vmid}."
-    exit 1
-  fi
-
-  local set_cmd="qm set"
-  local resize_cmd="qm resize"
-  [[ "$kind" == "lxc" ]] && set_cmd="pct set" && resize_cmd="pct resize"
-
-  if [[ -n "$cores" || -n "$memory" ]]; then
-    local args=""
-    [[ -n "$cores" ]] && args="${args} --cores ${cores}"
-    [[ -n "$memory" ]] && args="${args} --memory ${memory}"
-    remote "${set_cmd} ${vmid}${args}"
-  fi
-  if [[ -n "$grow_disk" ]]; then
-    remote "${resize_cmd} ${vmid} ${disk_key} +${grow_disk}G"
-  fi
-
-  echo
-  echo "Done. VMID ${vmid} updated."
-}
-
-if [[ "$modify" -eq 1 ]]; then
-  cmd_modify
-  exit 0
-fi
-
-# ============================================================= create mode
-if [[ "$type" != "lxc" && "$type" != "vm" ]]; then
-  echo "ERROR: --type must be 'lxc' or 'vm'." >&2
-  usage >&2
-  exit 1
-fi
-
-platform_prefix="lxc"
-[[ "$type" == "vm" ]] && platform_prefix="proxmox"
-[[ -z "$cores" ]] && cores="$PROXMOX_DEFAULT_CORES"
-[[ -z "$memory" ]] && memory="$PROXMOX_DEFAULT_MEMORY_MB"
-
-# --- discover / resolve the flake target from --host --------------------
-list_hosts() {
-  local target hostname
-  for target in $(nix eval --json --no-use-registries --no-accept-flake-config \
-    "${repo_root}#nixosConfigurations" --apply builtins.attrNames 2>/dev/null \
-    | jq -r --arg p "${platform_prefix}-" '.[] | select(startswith($p))'); do
-    hostname="$(nix eval --raw --no-use-registries --no-accept-flake-config \
-      "${repo_root}#nixosConfigurations.${target}.config.networking.hostName" 2>/dev/null)"
-    printf '  %-12s -> %s\n' "$hostname" "$target"
-  done
-}
-
-if [[ "$do_list" -eq 1 ]]; then
-  echo "Available --host values for --type ${type}:"
-  list_hosts
-  exit 0
-fi
-
-if [[ -z "$host" ]]; then
-  echo "ERROR: --host is required (or use --list to see options)." >&2
-  exit 1
-fi
-
-flake_target=""
-for target in $(nix eval --json --no-use-registries --no-accept-flake-config \
-  "${repo_root}#nixosConfigurations" --apply builtins.attrNames \
-  | jq -r --arg p "${platform_prefix}-" '.[] | select(startswith($p))'); do
-  hn="$(nix eval --raw --no-use-registries --no-accept-flake-config \
-    "${repo_root}#nixosConfigurations.${target}.config.networking.hostName")"
-  if [[ "$hn" == "$host" ]]; then
-    flake_target="$target"
-    break
-  fi
-done
-
-if [[ -z "$flake_target" ]]; then
-  echo "ERROR: no ${platform_prefix}-* target has hostName '${host}'." >&2
-  echo "Available:" >&2
-  list_hosts >&2
-  exit 1
-fi
-
-# The container/VM's real identity is --host (e.g. "nix-cache"), validated
-# above against config.networking.hostName -- not the flake target name
-# (e.g. "lxc-nix-cache"), which is build-type-specific and only exists to
-# pick which platform variant to build. Defaulting --name to the flake
-# target would make lxc's --hostname (which proxmoxLXC.manageHostName
-# feeds straight into the guest's real hostname) disagree with host.nix.
-[[ -z "$name" ]] && name="$host"
-
-# --- refuse to duplicate a host that's already live on the node ---------
-# Queries the node itself (qm/pct's own name/hostname config), not any
-# static list in this repo -- a file can't track whether a resource still
-# actually exists, and this used to be checked against variables.nix's
-# deployedTargets, which drifted stale (it kept naming a VM as "the real
-# deployment" well after that VM had been destroyed, blocking its own
-# redeploy) until that list was dropped in favour of this live check. This
-# only catches guests identified with the default --name (== --host, what
-# this script itself always uses unless --name is overridden) -- a guest
-# manually renamed on the node afterwards wouldn't match, but nothing here
-# creates guests that way.
-if [[ "$allow_duplicate_host" -eq 1 ]]; then
-  echo
-  echo "--allow-duplicate-host: skipping the check for an existing '${host}' on ${node}."
-elif [[ "$dry_run" -eq 1 ]]; then
-  echo
-  echo "[dry-run] would check ${node} for an existing VM/CT identified as '${host}'"
-else
-  echo
-  echo "==> Checking ${node} for an existing VM/CT identified as '${host}'..."
-  ssh_check_status=0
-  existing="$(ssh "$ssh_target" bash -s -- "$host" <<'REMOTE_SCRIPT'
-target="$1"
-for id in $(qm list 2>/dev/null | awk 'NR>1{print $1}'); do
-  n="$(qm config "$id" 2>/dev/null | grep -oP '^name:\s*\K\S+' || true)"
-  [[ "$n" == "$target" ]] && echo "vm ${id} ${n}"
-done
-for id in $(pct list 2>/dev/null | awk 'NR>1{print $1}'); do
-  n="$(pct config "$id" 2>/dev/null | grep -oP '^hostname:\s*\K\S+' || true)"
-  [[ "$n" == "$target" ]] && echo "lxc ${id} ${n}"
-done
-REMOTE_SCRIPT
-  )" || ssh_check_status=$?
-  if [[ "$ssh_check_status" -ne 0 ]]; then
-    echo "ERROR: couldn't reach ${node} (ssh exited ${ssh_check_status}) to check for an" >&2
-    echo "existing '${host}' resource -- refusing to guess. Fix connectivity and retry," >&2
-    echo "or pass --allow-duplicate-host if you're sure none exists (this skips the" >&2
-    echo "check entirely)." >&2
-    exit 1
-  fi
-  if [[ -n "$existing" ]]; then
-    echo "ERROR: '${host}' already exists on ${node}:" >&2
-    echo "$existing" | while read -r kind id n; do
-      echo "  - ${kind} VMID ${id} (${n})" >&2
-    done
-    echo "Refusing to create a second resource sharing this identity. Pass" >&2
-    echo "--allow-duplicate-host to create one anyway (it gets its own distinct" >&2
-    echo "sops key and VMID -- the existing resource(s) above are left untouched)," >&2
-    echo "or use --modify to reconfigure the existing one instead." >&2
-    exit 1
-  fi
-fi
-
-echo "Target: ${flake_target} (host=${host}, type=${type}) -> Proxmox resource '${name}'"
-
-# Decide on nix-cache once, here -- this is the earliest point that needs
-# it (sync-host-keys.sh below needs nix-shell packages regardless of
-# whether an image ends up getting built later), and the decision is
-# exported so that subprocess -- and this script's own later build step,
-# if it gets there -- both reuse it instead of probing again.
-nix_extra_opts
-
-# --- make sure this target has a registered host key --------------------
-echo
-echo "==> Ensuring host key exists and is registered..."
-sync_args=("$flake_target")
-[[ "$dry_run" -eq 1 ]] && sync_args+=(--dry-run)
-bash "$sync_keys" "${sync_args[@]}"
-
-# --- VMID: pick one, and refuse to touch anything that already exists ---
-echo
-if [[ -z "$vmid" ]]; then
-  if [[ "$dry_run" -eq 1 ]]; then
-    vmid="<next-free-vmid>"
-    echo "[dry-run] would ask ${node} for the next free VMID (pvesh get /cluster/nextid)"
-  else
-    vmid="$(ssh "$ssh_target" "pvesh get /cluster/nextid" | tr -d '[:space:]')"
-    echo "Auto-assigned VMID: ${vmid}"
-  fi
-else
-  echo "Requested VMID: ${vmid}"
-fi
-
-if [[ "$dry_run" -eq 0 ]]; then
-  # qm/pct status exits non-zero (and prints "does not exist") for a free
-  # ID on that resource type -- but a VMID could exist as the OTHER
-  # resource type (e.g. requested a CT id that's actually a VM), so check
-  # both. Any success here means something is already using this ID --
-  # refuse to go anywhere near it. (Reconfiguring an existing resource is
-  # --modify's job, not this one's.)
-  if ssh "$ssh_target" "qm status ${vmid}" >/dev/null 2>&1 \
-    || ssh "$ssh_target" "pct status ${vmid}" >/dev/null 2>&1; then
-    echo "ERROR: VMID ${vmid} already exists on ${node}. Refusing to touch an" >&2
-    echo "existing resource here -- use --modify to reconfigure it, pick a" >&2
-    echo "different --vmid, or omit it to auto-assign." >&2
-    exit 1
-  fi
-fi
-
-# --- resolve the remote path -- fixed naming (not the nix store's own
-# derivation-hash-based filename), so a later run can check for it by name.
-# lxc uploads as a CT *template* (Proxmox's "vztmpl" content type, under
-# iso_storage) -- config.system.build.tarball is a plain rootfs tarball,
-# not a vzdump backup archive, so it's created with `pct create ... vztmpl`,
-# not restored with `pct restore` (that expects backup-archive metadata
-# this tarball doesn't have, and fails with "archive contains no
-# configuration file").
-remote_dir="/var/lib/vz/import"
-remote_filename="${flake_target}.raw"
-if [[ "$type" == "lxc" ]]; then
-  remote_dir="/var/lib/vz/template/cache"
-  remote_filename="${flake_target}.tar.xz"
-fi
-remote_path="${remote_dir}/${remote_filename}"
-
-# --- build (or reuse an image already on the node) ------------------------
-echo
-local_image=""
-image_already_remote=0
-
-if [[ -n "$image" ]]; then
-  [[ -f "$image" ]] || { echo "ERROR: --image '${image}' not found." >&2; exit 1; }
-  local_image="$image"
-  echo "Using provided image: ${local_image}"
-elif [[ "$force_rebuild" -eq 1 ]]; then
-  echo "--force-rebuild: skipping the existing-image check on ${node}."
-else
-  echo "==> Checking whether ${node} already has ${remote_path}..."
-  if [[ "$dry_run" -eq 1 ]]; then
-    echo "[dry-run] would check: ssh ${ssh_target} -- test -f ${remote_path}"
-  elif ssh "$ssh_target" "test -f '${remote_path}'" 2>/dev/null; then
-    echo "Found it -- reusing, skipping build and upload (use --force-rebuild to override)."
-    image_already_remote=1
-  else
-    echo "Not found -- will build."
-  fi
-fi
-
-if [[ "$image_already_remote" -eq 0 && -z "$local_image" ]]; then
-  # Mirrors the real build commands' "${NIX_OPTS[@]}" below -- nix_extra_opts
-  # (called earlier, once) has already decided whether nix-cache is in play,
-  # and the dry-run preview needs to reflect that decision instead of always
-  # printing the same command regardless of outcome.
-  nix_opts_display=""
-  if [[ ${#NIX_OPTS[@]} -gt 0 ]]; then
-    printf -v nix_opts_display '%q ' "${NIX_OPTS[@]}"
-    nix_opts_display=" ${nix_opts_display% }"
-  fi
-  if [[ "$type" == "lxc" ]]; then
-    if [[ "$dry_run" -eq 1 ]]; then
-      echo "[dry-run] would build: NIXOS_HOST_KEYS_DIR=${repo_root}/host-keys nix build --impure \\"
-      echo "[dry-run]   --no-use-registries --no-accept-flake-config${nix_opts_display} \\"
-      echo "[dry-run]   .#nixosConfigurations.${flake_target}.config.system.build.tarball"
-      local_image="<built-tarball>"
-    else
-      echo "==> Building LXC tarball for ${flake_target}..."
-      NIXOS_HOST_KEYS_DIR="${repo_root}/host-keys" nix build --impure \
-        --no-use-registries --no-accept-flake-config "${NIX_OPTS[@]}" \
-        ".#nixosConfigurations.${flake_target}.config.system.build.tarball" \
-        --out-link "${repo_root}/result-${flake_target}"
-      local_image="$(find "${repo_root}/result-${flake_target}/tarball" -maxdepth 1 -type f | head -1)"
-      echo "Built: ${local_image}"
-    fi
-  else
-    if [[ "$dry_run" -eq 1 ]]; then
-      echo "[dry-run] would build: nix build --no-use-registries --no-accept-flake-config${nix_opts_display} \\"
-      echo "[dry-run]   .#nixosConfigurations.${flake_target}.config.system.build.diskoImagesScript"
-      echo "[dry-run] would run:   sudo ./result-${flake_target} \\"
-      echo "[dry-run]                --pre-format-files host-keys/${flake_target}_ssh_host_ed25519_key /etc/ssh/ssh_host_ed25519_key \\"
-      echo "[dry-run]                --pre-format-files host-keys/${flake_target}_ssh_host_ed25519_key.pub /etc/ssh/ssh_host_ed25519_key.pub \\"
-      echo "[dry-run]                --build-memory 2048"
-      local_image="<built-image>.raw"
-    else
-      echo "==> Building Disko image script for ${flake_target}..."
-      nix build --no-use-registries --no-accept-flake-config "${NIX_OPTS[@]}" \
-        ".#nixosConfigurations.${flake_target}.config.system.build.diskoImagesScript" \
-        --out-link "${repo_root}/result-${flake_target}"
-      echo "==> Running it (builds the .raw image in a temporary QEMU VM, needs sudo)..."
-      ( cd "$repo_root" && sudo "./result-${flake_target}" \
-          --pre-format-files "host-keys/${flake_target}_ssh_host_ed25519_key" /etc/ssh/ssh_host_ed25519_key \
-          --pre-format-files "host-keys/${flake_target}_ssh_host_ed25519_key.pub" /etc/ssh/ssh_host_ed25519_key.pub \
-          --build-memory 2048 )
-      local_image="$(find "$repo_root" -maxdepth 1 -name "*.raw" -newer "${repo_root}/result-${flake_target}" | head -1)"
-      if [[ -z "$local_image" ]]; then
-        echo "ERROR: expected a .raw image after the build but didn't find one in ${repo_root}." >&2
-        exit 1
-      fi
-      echo "Built: ${local_image}"
-    fi
-  fi
-fi
-
-# --- upload (skip entirely if reusing an image already on the node) ------
-echo
-if [[ "$image_already_remote" -eq 1 ]]; then
-  : # nothing to upload
-elif [[ "$dry_run" -eq 1 ]]; then
-  echo "[dry-run] would upload: scp ${local_image} ${ssh_target}:${remote_path}"
-else
-  echo "==> Uploading to ${node}:${remote_path}..."
-  ssh "$ssh_target" "mkdir -p ${remote_dir}"
-  scp "$local_image" "${ssh_target}:${remote_path}"
-fi
-
-# --- create -----------------------------------------------------------------
-echo
-if [[ "$type" == "lxc" ]]; then
-  echo "==> Creating LXC container ${vmid} (${name})..."
-  local_disk_size="${disk_size:-$PROXMOX_DEFAULT_LXC_DISK_GB}"
-  # --memory doesn't touch swap -- it silently stays at Proxmox's own
-  # 512M default otherwise (confirmed live: --memory 2048 left swap at
-  # 512). Default to matching whatever --memory resolved to above.
-  local_swap="${swap:-$memory}"
-  # --unprivileged 1: modules/platforms/lxc.nix sets proxmoxLXC.privileged
-  # = false, so the NixOS config inside the image assumes it's running as
-  # an unprivileged container (cgroup/capability/mount expectations baked
-  # in at boot). `pct create`'s own CLI default for this flag is
-  # privileged (unlike the web UI, which defaults its checkbox the other
-  # way) -- leaving it unset creates a privileged container running a
-  # NixOS config that assumes unprivileged, a real mismatch.
-  #
-  # --features nesting=1,keyctl=1: required for a modern (v247+) systemd
-  # guest to actually boot unprivileged -- confirmed live: without this,
-  # AppArmor denies the nested user namespaces and credential mounts
-  # systemd routinely uses (even plain getty units), and every getty
-  # crash-loops on a denied mount every ~3s (visible as garbage on the
-  # console) while core services like nsncd fail the same way.
-  create_cmd="pct create ${vmid} ${iso_storage}:vztmpl/${remote_filename} --unprivileged 1 --features ${PROXMOX_DEFAULT_LXC_FEATURES} --rootfs ${storage}:${local_disk_size} --hostname ${name} --cores ${cores} --memory ${memory} --swap ${local_swap} --net0 name=eth0,bridge=${bridge},ip=dhcp"
-  remote "$create_cmd"
-  remote "pct start ${vmid}"
-else
-  echo "==> Creating VM ${vmid} (${name})..."
-  # pre-enrolled-keys=0 disables OVMF's Secure Boot key pre-enrollment --
-  # required, or systemd-boot (unsigned) can't be trusted by the firmware.
-  remote "qm create ${vmid} --name ${name} --memory ${memory} --cores ${cores} \
---net0 virtio,bridge=${bridge} --bios ovmf --machine q35 --scsihw virtio-scsi-pci \
---efidisk0 ${storage}:1,efitype=4m,pre-enrolled-keys=0"
-
-  if [[ "$dry_run" -eq 1 ]]; then
-    echo "[dry-run] ssh ${ssh_target} -- qm importdisk ${vmid} ${remote_path} ${storage}"
-    echo "[dry-run] (would parse the resulting disk identifier from that output)"
-    echo "[dry-run] ssh ${ssh_target} -- qm set ${vmid} --scsi0 ${storage}:<parsed-disk-id>"
-  else
-    importdisk_output="$(ssh "$ssh_target" "qm importdisk ${vmid} ${remote_path} ${storage}")"
-    echo "$importdisk_output"
-    disk_id="$(echo "$importdisk_output" | grep -oP "(?<=Successfully imported disk as ')[^']+" | sed 's/^unused[0-9]*://')"
-    if [[ -z "$disk_id" ]]; then
-      echo "ERROR: couldn't parse the imported disk identifier from qm importdisk's output above." >&2
-      echo "The VM shell (${vmid}) and imported disk both exist -- finish attaching it by hand:" >&2
-      echo "  ssh ${ssh_target} -- qm set ${vmid} --scsi0 ${storage}:<disk-id-from-output-above>" >&2
-      echo "  ssh ${ssh_target} -- qm set ${vmid} --boot order=scsi0" >&2
-      exit 1
-    fi
-    remote "qm set ${vmid} --scsi0 ${disk_id}"
-  fi
-  remote "qm set ${vmid} --boot order=scsi0"
-  remote "qm start ${vmid}"
-fi
-
-echo
-if [[ "$dry_run" -eq 1 ]]; then
-  echo "[dry-run] Nothing was built, uploaded, or created."
-else
-  echo "Done. ${name} (VMID ${vmid}) should be booting on ${node}."
-fi

scripts/env.sh

@@ -3,21 +3,39 @@
 # second copy of these values in every script:
 #   source "$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)/env.sh"
 # Every variable can still be overridden per-invocation via the
-# environment (e.g. PROXMOX_STORAGE=tank-nvme ./scripts/create-proxmox-resource.sh ...)
+# environment (e.g. PROXMOX_STORAGE=tank-nvme ./scripts/proxmox/create-proxmox-resource.sh ...)
 # since each one only sets a default if unset.
 
-# SSH-reachable Proxmox node that scripts/create-proxmox-resource.sh runs
-# pct/qm on. Matches the Proxmox web UI hostname already used in
-# hosts/nixos/home.nix's desktop shortcuts (pve.<homeDomain> from
-# variables.nix) -- change this if that's not actually reachable over SSH,
-# or if you're targeting a different node in a multi-node cluster.
-: "${PROXMOX_HOST:=pve.sweet.home}"
-: "${PROXMOX_SSH_USER:=root}"
+# Two SSH-reachable Proxmox nodes exist on the LAN:
+#   - pve1.sweet.home      -- production. Real, live VMs/containers.
+#   - pve-test.sweet.home  -- sandbox/test node, for scratch VMs/containers
+#     that don't belong on production.
+#
+# PROXMOX_HOST is what scripts/proxmox/create-proxmox-resource.sh actually
+# targets by default -- overridable per-invocation with --node <hostname>,
+# or per-variable as usual (e.g. PROXMOX_HOST=$PVE_TEST_HOST). It defaults
+# to production, matching this repo's behavior before pve-test existed --
+# see CLAUDE.md's "Two Proxmox nodes" section for the policy on which
+# situations should target which node (in particular: Claude defaults to
+# pve-test, not this variable's own default, unless explicitly told
+# otherwise).
+: "${PVE1_HOST:=pve1.sweet.home}"
+: "${PVE_TEST_HOST:=pve-test.sweet.home}"
+: "${PROXMOX_HOST:=$PVE1_HOST}"
+: "${PROXMOX_SSH_USER:=wayne}"
+
+# Where this flake repo lives on the Proxmox node itself.
+# scripts/proxmox/create-proxmox-resource.sh builds images directly on the node
+# instead of transferring them over the network -- it clones the repo here
+# (from this checkout's own `origin` remote) the first time it doesn't
+# find it, installing build tooling via scripts/codex-setup.sh, then
+# `git pull`s it before every subsequent build.
+: "${PROXMOX_REMOTE_REPO_DIR:=/home/${PROXMOX_SSH_USER}/nixos}"
 
 # Storage pool names -- Proxmox's own stock-install defaults, but this
 # varies a lot by setup (ZFS pool name, custom LVM-thin volume, etc.).
 # Verify with `pvesm status` on the node and correct these if wrong.
-: "${PROXMOX_STORAGE:=local-lvm}"     # VM disks / CT rootfs
+: "${PROXMOX_STORAGE:=local-zfs}"     # VM disks / CT rootfs
 : "${PROXMOX_ISO_STORAGE:=local}"     # uploaded images/ISOs/CT templates
 
 : "${PROXMOX_BRIDGE:=vmbr0}"
@@ -45,16 +63,31 @@
 # crash-loops on a denied `/run/credentials/*` mount every ~3s (visible
 # as garbage on the console) and core services like nsncd fail the same
 # way on userns_create; system.build.tarball never finishes activating.
-: "${PROXMOX_DEFAULT_LXC_FEATURES:=nesting=1,keyctl=1}"
+#
+# mount=nfs;nfs4: without it, AppArmor blanket-denies the `nfs`/
+# `rpc_pipefs` mount syscalls any NFS client share needs -- confirmed
+# live on lxc-docker (which mounts several, see modules/docker/mount-data.nix
+# and modules/raspi/mount-data.nix): `mount: /var/lib/nfs/rpc_pipefs:
+# permission denied`. Harmless to grant on lxc targets that don't mount
+# NFS at all -- it only widens what the container is *allowed* to mount,
+# nothing here forces a mount to happen.
+: "${PROXMOX_DEFAULT_LXC_FEATURES:=nesting=1,keyctl=1,mount=nfs;nfs4}"
 
-export PROXMOX_HOST PROXMOX_SSH_USER PROXMOX_STORAGE PROXMOX_ISO_STORAGE \
-  PROXMOX_BRIDGE PROXMOX_DEFAULT_CORES PROXMOX_DEFAULT_MEMORY_MB \
-  PROXMOX_DEFAULT_LXC_DISK_GB PROXMOX_DEFAULT_LXC_FEATURES
+export PVE1_HOST PVE_TEST_HOST PROXMOX_HOST PROXMOX_SSH_USER PROXMOX_STORAGE \
+  PROXMOX_ISO_STORAGE PROXMOX_BRIDGE PROXMOX_DEFAULT_CORES \
+  PROXMOX_DEFAULT_MEMORY_MB PROXMOX_DEFAULT_LXC_DISK_GB \
+  PROXMOX_DEFAULT_LXC_FEATURES PROXMOX_REMOTE_REPO_DIR
 
 # Matches variables.nix's nixCacheHost -- update both if it ever changes.
 : "${NIX_CACHE_HOST:=nix-cache}"
 export NIX_CACHE_HOST
 
+# Matches variables.nix's lanDomain (the Gitea host this flake's own repo
+# is served from -- see scripts/installer/auto-install.sh's FLAKE_BASE_URL)
+# -- update both if it ever changes.
+: "${LAN_DOMAIN:=gitea.lan.ddnsgeek.com}"
+export LAN_DOMAIN
+
 # nix_extra_opts: call as a plain statement (NOT inside $(...)/<(...) --
 # that forks a subshell, and the whole point is exporting a decision back
 # into *this* shell) to populate the global NIX_OPTS array with whatever

scripts/installer/auto-install.sh

@@ -0,0 +1,206 @@
+#!/usr/bin/env nix-shell
+#!nix-shell -i bash -p jq disko nixos-install-tools zfs
+# shellcheck shell=bash
+# The only genuinely external tools this script calls directly: `jq`
+# (parsing the `nix eval` host list), `disko`/`nixos-install` (the
+# install itself), and `zpool` (exporting a ZFS root pool before reboot,
+# see the comment above that call below). Everything disko shells out to
+# internally (parted/sgdisk/mkfs.*/zfs/...) is self-contained -- disko's
+# own generated scripts hardcode absolute Nix store paths for those, they
+# don't rely on this script's PATH at all (confirmed by inspecting a
+# generated system.build.formatScript). The built installer image
+# (modules/installer/common.nix, plus the upstream
+# installation-cd-minimal.nix it imports via iso.nix) already has all
+# four in environment.systemPackages, so this nix-shell wrapper is a
+# fast no-op there; it's what makes the script also work standalone
+# (e.g. run directly from a checkout on a stock ISO), where they aren't
+# guaranteed.
+set -eux
+
+set -euo pipefail
+
+# shellcheck source=../env.sh
+source "$(cd "$(dirname "${BASH_SOURCE[0]}")/.." && pwd)/env.sh"
+
+export FLAKE_BASE_URL="git+https://${LAN_DOMAIN}/beatzaplenty/nixos.git"
+
+echo "Fetching available NixOS hosts from flake..."
+# Two categories deliberately excluded from the menu:
+#   lxc-*     — these build a config.system.build.tarball meant for
+#               `pct restore` on Proxmox directly, not an install.
+#               Running nixos-install against one here would
+#               bind-mount / onto /mnt and then refuse to touch the
+#               filesystem it's currently running on — see
+#               docs/auto-installer.md.
+#   installer — this *is* the installer image's own flake target,
+#               not a deployable host; "installing" it means
+#               nixos-install-ing a copy of the installer into
+#               itself.
+mapfile -t options < <(
+  nix eval --json --no-use-registries --no-accept-flake-config --extra-experimental-features "flakes nix-command" \
+    "${FLAKE_BASE_URL}#nixosConfigurations" \
+    --apply builtins.attrNames \
+  | jq -r '.[]
+      | select(startswith("lxc-") | not)
+      | select(. != "installer")'
+)
+
+if [[ ${#options[@]} -eq 0 ]]; then
+  echo "ERROR: No NixOS hosts found in ${FLAKE_BASE_URL}#nixosConfigurations" >&2
+  exit 1
+fi
+
+echo "Note: lxc-* targets aren't installed this way — build them with"
+echo "  nix build .#nixosConfigurations.<name>.config.system.build.tarball"
+echo "and 'pct restore' the result on Proxmox directly. See docs/auto-installer.md."
+
+echo "Choose the flake profile to install:"
+select choice in "${options[@]}"; do
+  if [[ -n "$choice" ]]; then
+    echo "You selected: $choice"
+    break
+  else
+    echo "Invalid selection. Try again."
+  fi
+done
+
+echo "Starting install with flake: ${FLAKE_BASE_URL}#${choice}"
+
+# Optional: confirm before proceeding
+read -rp "Proceed with installation? (y/N): " confirm
+if [[ ! "$confirm" =~ ^[Yy]$ ]]; then
+  echo "Aborted."
+  exit 1
+fi
+
+# A nix-cache host is *the* substituter/remote-builder for every other
+# host once installed (its own config explicitly excludes itself from
+# using either — see buildType != "nix-cache" in the nixos flake.nix).
+# Installing one shouldn't depend on a nix-cache substituter either,
+# for the same reason — plus in practice "nix-cache" only resolves over
+# Tailscale, which a fresh installer environment was never connected to
+# anyway, so it's dead weight even for non-nix-cache installs until
+# that's sorted out. Override it away here specifically for nix-cache
+# targets to keep install-time behaviour consistent with run-time.
+nix_extra_opts=()
+if [[ "${choice}" == *-nix-cache ]]; then
+    echo "Installing a nix-cache host — skipping the nix-cache substituter."
+    nix_extra_opts+=(--option substituters "https://cache.nixos.org/")
+fi
+
+# Every host reachable through this menu has a Disko config (lxc-*
+# is filtered out above, and is the only category that doesn't —
+# see docs/auto-installer.md), so this can run unconditionally: no
+# need to probe the flake first and branch on whether Disko applies.
+disko --mode destroy,format,mount \
+    --flake "${FLAKE_BASE_URL}#${choice}" "${nix_extra_opts[@]}" --yes-wipe-all-disks
+
+# sops-nix derives this host's decryption key from its own SSH host key
+# at *activation* time, which runs before systemd would otherwise
+# generate one on first boot. Without pre-seeding it here, secrets
+# (including the login password) fail to decrypt on first boot.
+# Generate the key with scripts/secrets/prepare-host-key.sh first.
+#
+# Two places a key can come from, checked in order:
+#   /etc/host-keys  — baked into this image at build time (see
+#                      modules/installer/host-keys.nix; only present
+#                      if built with NIXOS_HOST_KEYS_DIR set)
+#   /root/host-keys — scp'd in manually after boot (older fallback,
+#                      still supported for images built without keys)
+mkdir -p /root/host-keys
+if [[ -f "/etc/host-keys/${choice}_ssh_host_ed25519_key" ]]; then
+    echo "Found baked-in SSH host key for ${choice}, installing to target..."
+    install -D -m 0600 "/etc/host-keys/${choice}_ssh_host_ed25519_key" /mnt/etc/ssh/ssh_host_ed25519_key
+    install -D -m 0644 "/etc/host-keys/${choice}_ssh_host_ed25519_key.pub" /mnt/etc/ssh/ssh_host_ed25519_key.pub
+elif [[ -f "/root/host-keys/${choice}_ssh_host_ed25519_key" ]]; then
+    echo "Found pre-seeded SSH host key for ${choice}, installing to target..."
+    install -D -m 0600 "/root/host-keys/${choice}_ssh_host_ed25519_key" /mnt/etc/ssh/ssh_host_ed25519_key
+    install -D -m 0644 "/root/host-keys/${choice}_ssh_host_ed25519_key.pub" /mnt/etc/ssh/ssh_host_ed25519_key.pub
+else
+    # Third place a key can come from: an arbitrary path the operator
+    # points at interactively (e.g. a USB stick, a mount from another
+    # machine) -- only offered when there's an actual human at the other
+    # end of stdin to ask, never in a non-interactive run.
+    key_copied=0
+    if [[ -t 0 ]]; then
+        echo "No SSH host key found for ${choice} (checked /etc/host-keys and /root/host-keys)."
+        read -rp "Path to a directory containing ${choice}_ssh_host_ed25519_key(.pub) (blank to skip): " key_src_dir
+        if [[ -n "$key_src_dir" && -f "${key_src_dir}/${choice}_ssh_host_ed25519_key" && -f "${key_src_dir}/${choice}_ssh_host_ed25519_key.pub" ]]; then
+            cp "${key_src_dir}/${choice}_ssh_host_ed25519_key" "${key_src_dir}/${choice}_ssh_host_ed25519_key.pub" /root/host-keys/
+            key_copied=1
+        elif [[ -n "$key_src_dir" ]]; then
+            echo "WARNING: ${choice}_ssh_host_ed25519_key(.pub) not found in ${key_src_dir}."
+        fi
+    fi
+
+    if [[ "$key_copied" -eq 1 ]]; then
+        echo "Copied SSH host key for ${choice} from ${key_src_dir}, installing to target..."
+        install -D -m 0600 "/root/host-keys/${choice}_ssh_host_ed25519_key" /mnt/etc/ssh/ssh_host_ed25519_key
+        install -D -m 0644 "/root/host-keys/${choice}_ssh_host_ed25519_key.pub" /mnt/etc/ssh/ssh_host_ed25519_key.pub
+    else
+        echo "WARNING: no SSH host key found for ${choice} (checked /etc/host-keys and /root/host-keys)"
+        echo "sops-nix secrets (including the login password) will NOT decrypt on first boot."
+        echo "Run scripts/secrets/prepare-host-key.sh for host ${choice} on your admin workstation first,"
+        echo "then either rebuild this image with NIXOS_HOST_KEYS_DIR set, scp the result to"
+        echo "/root/host-keys/ on this machine, or point at it when prompted above."
+        read -rp "Continue without a pre-seeded key anyway? (y/N): " skip_key
+        if [[ ! "$skip_key" =~ ^[Yy]$ ]]; then
+            echo "Aborted."
+            exit 1
+        fi
+    fi
+fi
+
+mkdir -p /mnt/install-tmp
+export TMPDIR=/mnt/install-tmp
+
+nixos-install \
+    --flake "${FLAKE_BASE_URL}#${choice}" \
+    "${nix_extra_opts[@]}" \
+    --no-root-password
+
+
+    rm -rf /mnt/install-tmp
+    # Redundant copy of the host's private key — the real one is now at
+    # /etc/ssh/ssh_host_ed25519_key. Nothing NixOS-managed ever cleans this
+    # up on its own since it was written imperatively, not declaratively.
+    rm -rf /root/host-keys
+
+    # disko's --mode ...,mount left any ZFS root pool imported (that's what
+    # let nixos-install write into /mnt). If we reboot with it still
+    # imported, it isn't just "not exported" -- it's stamped with *this*
+    # live installer environment's hostid, which almost never matches the
+    # target's own networking.hostId (see hosts/*/host.nix; the installer
+    # itself sets none). modules/services/zfs/enable-service.nix and
+    # modules/common/configuration.nix both set boot.zfs.forceImportRoot =
+    # false deliberately (the safe option per that setting's own docs), so
+    # the freshly-installed system's first real boot sees a pool "in use by
+    # another system" and refuses to import it without -f -- which is what
+    # makes boot stall waiting on the ZFS import. Exporting here (a no-op
+    # if the chosen host has no ZFS root, e.g. proxmox-*/linode-*) clears
+    # that in-use state so the next import, from any hostid, succeeds.
+    #
+    # Anything still mounted under /mnt -- nixos-install's own leftover
+    # chroot bind mounts for running the target's activation script
+    # (/mnt/dev, /mnt/proc, /mnt/sys, /mnt/run), and disko's own /mnt/boot
+    # ESP mount (modules/disko/baremetal.nix) -- blocks ZFS from unmounting
+    # its root dataset at /mnt, the same way any nested mount blocks
+    # unmounting its parent. Confirmed live: zpool export failed with
+    # "cannot unmount '/mnt': pool or dataset busy" even after handling the
+    # chroot mounts alone, because /mnt/boot was still mounted too. Because
+    # of this script's `set -e`, that killed the script before it ever
+    # reached reboot, silently defeating the whole point of exporting first.
+    # Unmounting everything under /mnt up front (recursively, so nested
+    # mounts like /mnt/dev/pts come along for free) sidesteps needing to
+    # enumerate every mount disko/nixos-install might leave behind.
+    if mountpoint -q /mnt; then
+        umount -R /mnt
+    fi
+
+    if [[ -n "$(zpool list -H -o name 2>/dev/null)" ]]; then
+        echo "Exporting ZFS pool(s) before reboot..."
+        zpool export -a
+    fi
+
+    sleep 10
+    reboot

scripts/lib/confirm.sh

@@ -0,0 +1,21 @@
+#!/usr/bin/env bash
+# Shared "type X to confirm" prompt for scripts/proxmox/create-proxmox-resource.sh
+# (--modify, and replacing an existing --allow-duplicate-host resource) and
+# scripts/secrets/sync-host-keys.sh (--regenerate-all-keys) -- three destructive
+# confirmations that all work the same way (echo the expected value back
+# exactly), kept in one place so the prompt/comparison logic can't drift.
+# Source alongside env.sh:
+#   source "$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)/lib/confirm.sh"
+#
+# Deliberately does NOT print anything on mismatch or decide exit-vs-return
+# -- callers vary on both (a top-level script exits, a subcommand function
+# returns; wording differs too), so that stays at the call site.
+
+# confirm_typed <expected> <prompt>
+# Prints <prompt> via `read -rp`, then reports (via exit status) whether the
+# typed input matched <expected> exactly.
+confirm_typed() {
+  local expected="$1" prompt="$2" input
+  read -rp "$prompt" input
+  [[ "$input" == "$expected" ]]
+}

scripts/lib/nix-bootstrap.sh

@@ -0,0 +1,20 @@
+#!/usr/bin/env bash
+# Shared Nix bootstrap for scripts/codex-setup.sh and
+# scripts/codex-maintenance.sh: the nix.conf settings both need in effect
+# before a single `nix` command runs (flakes enabled, never honor a flake
+# input's own nixConfig, no "dirty tree" warning spam), plus a helper to
+# pull an already-installed Nix's daemon/profile script onto PATH if it
+# isn't there yet. Source this instead of copying it -- see CLAUDE.md.
+export NIX_CONFIG="${NIX_CONFIG:-}
+experimental-features = nix-command flakes
+accept-flake-config = false
+warn-dirty = false
+"
+
+ensure_nix_profile() {
+  if [ -f /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh ]; then
+    . /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh
+  elif [ -f "$HOME/.nix-profile/etc/profile.d/nix.sh" ]; then
+    . "$HOME/.nix-profile/etc/profile.d/nix.sh"
+  fi
+}

scripts/lib/nix-eval.sh

@@ -0,0 +1,54 @@
+#!/usr/bin/env bash
+# Shared flake-introspection helpers for scripts/*.sh. Source alongside
+# env.sh:
+#   source "$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)/lib/nix-eval.sh"
+#
+# NIX_EVAL_FLAGS: --no-use-registries so a call here never resolves through
+# the user's global flake registry (every call targets this repo's own
+# flake, or an explicit github: ref, not a registry alias); --no-accept-flake-config
+# so a flake input's own nixConfig (e.g. a dependency's substituters) is
+# never honored -- matches accept-flake-config = false already set repo-wide
+# (see lib/nix-bootstrap.sh / CLAUDE.md). Reuse this array rather than
+# retyping the two flags at each call site.
+declare -a NIX_EVAL_FLAGS=(--no-use-registries --no-accept-flake-config)
+
+# list_flake_targets <flake_ref>
+# Prints the attribute names under <flake_ref>#nixosConfigurations, one per
+# line, e.g.:
+#   list_flake_targets .            # from inside the repo
+#   list_flake_targets "$repo_root" # from anywhere
+list_flake_targets() {
+  local flake_ref="$1"
+  nix eval --json "${NIX_EVAL_FLAGS[@]}" \
+    "${flake_ref}#nixosConfigurations" --apply builtins.attrNames \
+  | jq -r '.[]'
+}
+
+# flake_target_hostname <flake_ref> <target>
+# Prints one nixosConfigurations target's config.networking.hostName.
+# Empty (not an error under set -e) if the target doesn't exist or the
+# eval otherwise fails -- callers that need to distinguish "empty" from
+# "eval failed" should check $? themselves instead of relying on this.
+flake_target_hostname() {
+  local flake_ref="$1" target="$2"
+  nix eval --raw "${NIX_EVAL_FLAGS[@]}" \
+    "${flake_ref}#nixosConfigurations.${target}.config.networking.hostName" 2>/dev/null
+}
+
+# flake_target_lxc_privileged <flake_ref> <target>
+# Prints "true" or "false" for one lxc-* target's config.proxmoxLXC.privileged
+# (modules/platforms/lxc.nix is the single source of truth -- e.g.
+# lxc-docker sets this true so it can NFS-mount; every other lxc-* host
+# stays unprivileged). Only meaningful for lxc-* targets -- the option
+# doesn't exist for linode-*/proxmox-* (nixpkgs' proxmox-lxc.nix, which
+# declares it, is only ever imported by modules/platforms/lxc.nix). Empty
+# (not an error under set -e) if the eval fails.
+flake_target_lxc_privileged() {
+  local flake_ref="$1" target="$2"
+  # Not --raw: the option is a Nix boolean, and --raw can only coerce
+  # strings ("cannot coerce a Boolean to a string"). Plain `nix eval`
+  # prints a bare `true`/`false` for a boolean, which is exactly the
+  # string this needs.
+  nix eval "${NIX_EVAL_FLAGS[@]}" \
+    "${flake_ref}#nixosConfigurations.${target}.config.proxmoxLXC.privileged" 2>/dev/null
+}

scripts/lib/nix-parallel.sh

@@ -0,0 +1,95 @@
+#!/usr/bin/env bash
+# Shared parallel-nix-invocation helper for scripts/codex-maintenance.sh.
+# Source alongside nix-eval.sh:
+#   source "$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)/lib/nix-parallel.sh"
+#
+# The per-host/per-package `nix eval`/`nix build --dry-run` calls in
+# codex-maintenance.sh are independent of each other, so running them one at
+# a time leaves most cores idle for most of the sweep -- run_nix_parallel
+# fans a batch of them out across up to NIX_PARALLEL_JOBS processes instead.
+
+# NIX_PARALLEL_JOBS: how many `nix` invocations run_nix_parallel runs at
+# once. Defaults to core count capped by available memory (~1GB/job,
+# floor 1) rather than plain `nproc` -- each concurrent `nix eval` here
+# evaluates a whole NixOS system closure from scratch, and on a small/
+# memory-constrained CI runner, `nproc` concurrent evals can OOM-kill each
+# other (confirmed empirically: on a 4GB/6-core box, 5-6 concurrent evals
+# started getting killed while 3-4 ran clean and were still ~2x faster than
+# serial). Override via env if a given machine/CI runner has room to spare
+# or needs a tighter cap.
+default_nix_parallel_jobs() {
+  local cores mem_avail_kb mem_cap
+  cores="$(nproc 2>/dev/null || echo 4)"
+  mem_avail_kb="$(awk '/^MemAvailable:/ {print $2}' /proc/meminfo 2>/dev/null)"
+  if [[ -z "$mem_avail_kb" ]]; then
+    echo "$cores"
+    return
+  fi
+  mem_cap=$((mem_avail_kb / 1024 / 1024))
+  ((mem_cap < 1)) && mem_cap=1
+  ((mem_cap < cores)) && echo "$mem_cap" || echo "$cores"
+}
+NIX_PARALLEL_JOBS="${NIX_PARALLEL_JOBS:-$(default_nix_parallel_jobs)}"
+
+# Separator between a job's label and its flake attr in the arrays
+# run_nix_parallel takes -- a control character so it can't collide with
+# anything a label or attr path would plausibly contain.
+NIX_PARALLEL_SEP=$'\x1f'
+
+# run_nix_parallel <jobs_array_name> <nix subcommand + flags...>
+#
+# jobs_array_name: name of an already-populated bash array whose entries are
+# "<label>${NIX_PARALLEL_SEP}<attr>" pairs, e.g.
+#   jobs=("proxmox-docker${NIX_PARALLEL_SEP}.#nixosConfigurations.proxmox-docker...drvPath")
+# Remaining args are passed to `nix` before the attr, e.g.:
+#   run_nix_parallel jobs eval --raw "${NIX_EVAL_FLAGS[@]}"
+#   run_nix_parallel jobs build --dry-run --no-link "${NIX_EVAL_FLAGS[@]}"
+#
+# Prints "==> <label>" followed by that job's stdout+stderr for every job,
+# in submission order (not completion order) so a run stays readable and
+# diffable across invocations even though the work itself doesn't finish in
+# that order. Returns non-zero if any job failed, only after every job has
+# finished and been printed -- same "surface everything, then fail" contract
+# a `set -e` caller gets, just parallelized instead of stopping at the first
+# failure.
+run_nix_parallel() {
+  local -n jobs_ref="$1"
+  shift
+  local -a nix_args=("$@")
+
+  local n=${#jobs_ref[@]}
+  [[ $n -eq 0 ]] && return 0
+
+  local tmp_dir
+  tmp_dir="$(mktemp -d)"
+
+  local i=0 running=0
+  for job in "${jobs_ref[@]}"; do
+    local attr="${job#*"${NIX_PARALLEL_SEP}"}"
+    printf '%s\n' "${job%%"${NIX_PARALLEL_SEP}"*}" >"${tmp_dir}/${i}.label"
+    (
+      if nix "${nix_args[@]}" "$attr" >"${tmp_dir}/${i}.out" 2>&1; then
+        echo 0 >"${tmp_dir}/${i}.status"
+      else
+        echo 1 >"${tmp_dir}/${i}.status"
+      fi
+    ) &
+    i=$((i + 1))
+    running=$((running + 1))
+    if ((running >= NIX_PARALLEL_JOBS)); then
+      wait -n
+      running=$((running - 1))
+    fi
+  done
+  wait
+
+  local failed=0 j
+  for ((j = 0; j < n; j++)); do
+    echo "==> $(cat "${tmp_dir}/${j}.label")"
+    cat "${tmp_dir}/${j}.out"
+    [[ "$(cat "${tmp_dir}/${j}.status")" -ne 0 ]] && failed=1
+  done
+
+  rm -rf "$tmp_dir"
+  return $failed
+}

scripts/lib/sops-age.sh

@@ -0,0 +1,52 @@
+#!/usr/bin/env bash
+# Shared sops/age helpers for scripts/secrets/backup-admin-key.sh,
+# scripts/secrets/rotate-admin-key.sh, and scripts/secrets/sync-host-keys.sh -- all three
+# derive an age public key from a private identity file the same way, two
+# of them resolve the same sops/age default key-file path, and two of them
+# run `sops updatekeys` the same way. Kept in one place so they can't drift
+# apart. Source alongside env.sh:
+#   source "$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)/lib/sops-age.sh"
+#
+# Uses NIX_OPTS (an array of extra `nix-shell` options -- see env.sh's
+# nix_extra_opts) if the caller has already set it, same convention as
+# lib/ssh-host-keys.sh. Falls back to no extra options if the caller never
+# sourced env.sh.
+if ! declare -p NIX_OPTS >/dev/null 2>&1; then
+  declare -a NIX_OPTS=()
+fi
+
+# sops/age's own default identity-file resolution order, minus $SOPS_AGE_KEY
+# itself (an inline identity, not a path -- callers that accept it check it
+# separately, before falling back to this).
+: "${DEFAULT_SOPS_AGE_KEY_FILE:=${SOPS_AGE_KEY_FILE:-${XDG_CONFIG_HOME:-$HOME/.config}/sops/age/keys.txt}}"
+
+# age_pubkey_from_identity_file <identity-file>
+# Prints the age public key for a private identity file (age-keygen -y).
+age_pubkey_from_identity_file() {
+  local identity_file="$1"
+  nix-shell "${NIX_OPTS[@]}" -p age --run "age-keygen -y '${identity_file}'"
+}
+
+# sops_yaml_admin_pubkey <sops-yaml-path>
+# Prints .sops.yaml's current &admin age public key, or empty (not an error
+# under set -e) if no such anchor line exists -- callers that need to treat
+# "missing" as fatal check for an empty result themselves.
+sops_yaml_admin_pubkey() {
+  local sops_yaml="$1"
+  grep -E '^  - &admin age1' "$sops_yaml" 2>/dev/null | awk '{print $NF}' || true
+}
+
+# sops_updatekeys <secrets-file> [key-file]
+# Re-encrypts <secrets-file> for .sops.yaml's current recipient set. If
+# <key-file> is given, decrypts with that identity (SOPS_AGE_KEY_FILE)
+# instead of whatever's ambient -- needed when the ambient default key
+# doesn't match yet (e.g. mid-rotation, decrypting with the outgoing key).
+sops_updatekeys() {
+  local secrets_file="$1" key_file="${2:-}"
+  if [[ -n "$key_file" ]]; then
+    SOPS_AGE_KEY_FILE="$key_file" nix-shell "${NIX_OPTS[@]}" -p sops --run \
+      "sops updatekeys --yes '${secrets_file}'"
+  else
+    nix-shell "${NIX_OPTS[@]}" -p sops --run "sops updatekeys --yes '${secrets_file}'"
+  fi
+}

scripts/lib/ssh-host-keys.sh

@@ -0,0 +1,30 @@
+#!/usr/bin/env bash
+# Shared SSH-host-key / age-conversion helpers for scripts/secrets/sync-host-keys.sh
+# and scripts/secrets/prepare-host-key.sh -- both generate the same kind of key
+# (ed25519, no passphrase, the sops-nix age-derivation input) and convert it
+# to an age recipient the same way; kept in one place so the two can't
+# drift apart.
+#
+# Uses NIX_OPTS (an array of extra `nix-shell` options -- see env.sh's
+# nix_extra_opts) if the caller has already set it, so a decision to avoid
+# an unreachable nix-cache is reused here instead of probed again. Falls
+# back to no extra options if the caller never sourced env.sh.
+if ! declare -p NIX_OPTS >/dev/null 2>&1; then
+  declare -a NIX_OPTS=()
+fi
+
+# generate_host_ed25519_key <hostname> <keyfile>
+# Writes <keyfile> and <keyfile>.pub. Caller is responsible for refusing to
+# overwrite an existing keyfile -- this always runs ssh-keygen fresh.
+generate_host_ed25519_key() {
+  local hostname="$1" keyfile="$2"
+  nix-shell "${NIX_OPTS[@]}" -p openssh --run \
+    "ssh-keygen -t ed25519 -N '' -C '${hostname}' -f '${keyfile}'" >/dev/null
+}
+
+# ssh_pubkey_to_age <pubkeyfile>
+# Prints the age public key derived from an ed25519 SSH public key file.
+ssh_pubkey_to_age() {
+  local pubkeyfile="$1"
+  nix-shell "${NIX_OPTS[@]}" -p ssh-to-age --run "ssh-to-age -i '${pubkeyfile}'"
+}

scripts/proxmox/clone-pve1-to-pve-test.sh

@@ -0,0 +1,221 @@
+#!/usr/bin/env bash
+# Ad hoc clone of a single VM/CT from pve1 (production) to pve-test
+# (sandbox), via vzdump + qmrestore/pct restore -- not a general-purpose
+# backup tool, just a quick "give me a disposable copy of this thing on
+# pve-test" for testing against real-ish data without touching prod.
+#
+# Flow:
+#   1. vzdump the resource on pve1 into its "local" storage (--mode
+#      snapshot by default, so the source keeps running throughout --
+#      see --mode below for when that's not possible).
+#   2. Stream the resulting archive straight from pve1 to pve-test
+#      (ssh pve1 cat ... | ssh pve-test cat > ...) -- this machine is
+#      just the relay, no separate on-disk staging copy here.
+#   3. qmrestore / pct restore it on pve-test under --new-vmid (default:
+#      same VMID as the source -- pve-test is a separate node/cluster, so
+#      no collision unless that VMID is already in use there too).
+#      Always restored with --unique 1 (fresh MAC addresses) since the
+#      source is typically still running on the same LAN -- restoring
+#      with the *same* MAC would put two live guests on the wire with
+#      identical hardware addresses.
+#   4. Delete the vzdump archive from pve1's local storage and the
+#      relayed copy on pve-test, so neither node accumulates ad hoc
+#      backup files from this script. Only the pve1 original is
+#      preserved on any failure after step 1, so a failed
+#      transfer/restore can be retried without re-running the backup.
+#
+# This script's own defaults are pve1 -> pve-test, unlike
+# create-proxmox-resource.sh's --node (which defaults to production) --
+# see CLAUDE.md's "Two Proxmox nodes" section. pve1 is only ever touched
+# here after typing the source VMID back to confirm; pve-test is treated
+# as disposable, matching this repo's usual policy for that node.
+#
+# See --help for the full option list.
+set -euo pipefail
+
+repo_root="$(cd "$(dirname "$0")/../.." && pwd)"
+# shellcheck source=../env.sh
+source "${repo_root}/scripts/env.sh"
+# shellcheck source=../lib/confirm.sh
+source "${repo_root}/scripts/lib/confirm.sh"
+
+usage() {
+  cat <<EOF
+Usage: $0 --vmid <n> [options]
+
+  --vmid <n>              Required: VMID on the source node to clone.
+                           Kind (qemu VM vs LXC CT) is auto-detected.
+  --new-vmid <n>           VMID to restore as on the target node
+                           (default: same as --vmid).
+  --mode snapshot|suspend|stop
+                           vzdump backup mode (default: snapshot -- the
+                           source resource keeps running throughout;
+                           requires snapshot-capable storage, e.g.
+                           ZFS/LVM-thin/Ceph/qcow2). Fall back to
+                           "suspend" (brief pause) or "stop" (source
+                           goes down for the duration) if the source's
+                           storage doesn't support live snapshots --
+                           vzdump's own error will say so.
+  --source-node <host>      (default: \$PVE1_HOST, ${PVE1_HOST})
+  --target-node <host>       (default: \$PVE_TEST_HOST, ${PVE_TEST_HOST})
+  --source-storage <pool>      Where vzdump writes the backup on the
+                               source node (default: local).
+  --target-storage <pool>       Where the restored disk/rootfs lands on
+                               the target node (default: \$PROXMOX_STORAGE, ${PROXMOX_STORAGE}).
+  --keep-backup                  Don't delete the vzdump archive from
+                                 either node afterward (debugging aid).
+  --yes                            Skip the typed VMID confirmation
+                                   before touching the source node.
+  --dry-run                          Print the full plan and skip every
+                                     mutating step (vzdump, transfer,
+                                     restore, delete) and the confirm
+                                     prompt. Still makes read-only SSH
+                                     calls to look up the source kind
+                                     and check the target VMID is free
+                                     -- harmless on either node.
+  -h, --help
+EOF
+}
+
+vmid=""
+new_vmid=""
+mode="snapshot"
+source_node="$PVE1_HOST"
+target_node="$PVE_TEST_HOST"
+source_storage="local"
+target_storage="$PROXMOX_STORAGE"
+keep_backup=0
+skip_confirm=0
+dry_run=0
+
+while [[ $# -gt 0 ]]; do
+  case "$1" in
+  --vmid) vmid="$2"; shift 2 ;;
+  --new-vmid) new_vmid="$2"; shift 2 ;;
+  --mode) mode="$2"; shift 2 ;;
+  --source-node) source_node="$2"; shift 2 ;;
+  --target-node) target_node="$2"; shift 2 ;;
+  --source-storage) source_storage="$2"; shift 2 ;;
+  --target-storage) target_storage="$2"; shift 2 ;;
+  --keep-backup) keep_backup=1; shift ;;
+  --yes) skip_confirm=1; shift ;;
+  --dry-run) dry_run=1; shift ;;
+  -h | --help) usage; exit 0 ;;
+  *) echo "Unknown option: $1" >&2; usage >&2; exit 1 ;;
+  esac
+done
+
+if [[ -z "$vmid" ]]; then
+  echo "ERROR: --vmid is required." >&2
+  usage >&2
+  exit 1
+fi
+if [[ "$mode" != "snapshot" && "$mode" != "suspend" && "$mode" != "stop" ]]; then
+  echo "ERROR: --mode must be snapshot, suspend, or stop." >&2
+  exit 1
+fi
+[[ -z "$new_vmid" ]] && new_vmid="$vmid"
+
+source_target="${PROXMOX_SSH_USER}@${source_node}"
+target_target="${PROXMOX_SSH_USER}@${target_node}"
+
+# No dry-run wrapper needed for the calls below: every mutating step
+# (vzdump, transfer, restore, delete) is reached only after the --dry-run
+# early-exit further down, so a plain `ssh` call is never in the dry-run
+# path.
+
+# --- identify the resource kind on the source node -----------------------
+echo "==> Looking up VMID ${vmid} on ${source_node}..."
+kind=""
+if ssh "$source_target" "qm status ${vmid}" >/dev/null 2>&1; then
+  kind="vm"
+elif ssh "$source_target" "pct status ${vmid}" >/dev/null 2>&1; then
+  kind="lxc"
+else
+  echo "ERROR: VMID ${vmid} doesn't exist on ${source_node} as either a VM or CT." >&2
+  exit 1
+fi
+echo "VMID ${vmid} on ${source_node} is a ${kind}."
+
+# --- refuse to clobber an existing resource on the target node -----------
+if ssh "$target_target" "qm status ${new_vmid}" >/dev/null 2>&1 \
+  || ssh "$target_target" "pct status ${new_vmid}" >/dev/null 2>&1; then
+  echo "ERROR: VMID ${new_vmid} already exists on ${target_node}. Pass --new-vmid" >&2
+  echo "with a free ID, or remove the existing resource there first." >&2
+  exit 1
+fi
+
+echo
+echo "Plan:"
+echo "  source: ${kind} VMID ${vmid} on ${source_node} (storage: ${source_storage}, mode: ${mode})"
+echo "  target: VMID ${new_vmid} on ${target_node} (storage: ${target_storage}, fresh MAC via --unique)"
+[[ "$keep_backup" -eq 1 ]] && echo "  backup archives are kept on both nodes afterward (--keep-backup)"
+
+if [[ "$dry_run" -eq 1 ]]; then
+  echo
+  echo "[dry-run] No backup, transfer, restore, or delete was performed."
+  exit 0
+fi
+
+if [[ "$skip_confirm" -ne 1 ]]; then
+  echo
+  if ! confirm_typed "$vmid" "Type the source VMID (${vmid}) to confirm backing it up from ${source_node}: "; then
+    echo "Cancelled -- input didn't match ${vmid}." >&2
+    exit 1
+  fi
+fi
+
+# --- vzdump on the source node --------------------------------------------
+echo
+echo "==> Backing up VMID ${vmid} on ${source_node} (mode=${mode}, storage=${source_storage})..."
+vzdump_log="$(ssh "$source_target" \
+  "vzdump ${vmid} --mode ${mode} --storage ${source_storage} --compress zstd" 2>&1)" \
+  || {
+    echo "$vzdump_log" >&2
+    echo "ERROR: vzdump failed on ${source_node}." >&2
+    exit 1
+  }
+echo "$vzdump_log"
+
+archive="$(echo "$vzdump_log" | grep -oP "creating vzdump archive '\K[^']+" | tail -n1)"
+if [[ -z "$archive" ]]; then
+  echo "ERROR: couldn't find the archive path in vzdump's output above." >&2
+  exit 1
+fi
+archive_basename="$(basename "$archive")"
+target_tmp_archive="/var/tmp/${archive_basename}"
+echo "Archive: ${archive}"
+
+# Always clean up the relayed copy on the target node, success or failure
+# -- it's only ever a working copy, restored or not.
+cleanup_target_tmp() {
+  if [[ "$keep_backup" -ne 1 ]]; then
+    ssh "$target_target" "rm -f '${target_tmp_archive}'" >/dev/null 2>&1 || true
+  fi
+}
+trap cleanup_target_tmp EXIT
+
+# --- relay the archive from source to target ------------------------------
+echo
+echo "==> Transferring archive to ${target_node}..."
+ssh "$source_target" "cat '${archive}'" | ssh "$target_target" "cat > '${target_tmp_archive}'"
+
+# --- restore on the target node --------------------------------------------
+echo
+echo "==> Restoring as VMID ${new_vmid} on ${target_node} (storage=${target_storage})..."
+if [[ "$kind" == "vm" ]]; then
+  ssh "$target_target" "qmrestore '${target_tmp_archive}' ${new_vmid} --storage ${target_storage} --unique 1"
+else
+  ssh "$target_target" "pct restore ${new_vmid} '${target_tmp_archive}' --storage ${target_storage} --unique 1"
+fi
+
+# --- clean up the source backup now that the restore succeeded -----------
+if [[ "$keep_backup" -ne 1 ]]; then
+  echo
+  echo "==> Deleting backup archive from ${source_node}'s ${source_storage} storage..."
+  ssh "$source_target" "rm -f '${archive}' '${archive}.notes' '${archive}.log'" >/dev/null 2>&1 || true
+fi
+
+echo
+echo "Done. VMID ${new_vmid} (${kind}) is now on ${target_node}, cloned from" \
+  "VMID ${vmid} on ${source_node}."

scripts/proxmox/configure-nix-cache-client.sh

@@ -0,0 +1,199 @@
+#!/usr/bin/env bash
+# Points a non-NixOS Debian machine's Nix install at nix-cache: adds it as
+# a substituter (with cache.nixos.org kept as fallback) and, once the
+# remote-builder private key is installed, as a distributed-build machine
+# too.
+#
+# This is the non-NixOS equivalent of modules/nix-cache/client.nix +
+# modules/nix-cache/remote-builder-client.nix -- those two only apply to
+# hosts built from this flake. A plain Debian box with Nix installed has no
+# NixOS module system to pick that config up, so this edits nix.conf by hand.
+#
+# Two modes depending on who runs it:
+#
+#   root (multi-user / daemon install):
+#     Writes /etc/nix/nix.conf, /etc/ssh/ssh_known_hosts, restarts nix-daemon.
+#     Requires /etc/nix/nix.conf to already exist (i.e. nix-daemon is set up).
+#     Run as: sudo ./configure-nix-cache-client.sh [options]
+#
+#   non-root (single-user install):
+#     Writes ~/.config/nix/nix.conf, ~/.ssh/known_hosts. No daemon to restart.
+#     Run as: ./configure-nix-cache-client.sh [options]
+#
+# The values below mirror variables.nix / modules/nix-cache/client.nix in
+# this repo -- update both if nix-cache is ever rebuilt with a new host
+# key or the cache signing key is rotated (see docs/nix-cache.md).
+#
+# REMOTE_BUILDER_KEY defaults to the running user's default SSH identity
+# (root: /root/.ssh/id_ed25519, other user: ~/.ssh/id_ed25519). That key
+# must be listed in vars.remoteBuilderAuthorizedKeys in this repo and
+# nix-cache rebuilt before remote building works.
+#
+# Usage:
+#   ./configure-nix-cache-client.sh [--dry-run] [--no-remote-builder] [--no-restart]
+#
+# Env overrides (defaults match variables.nix):
+#   NIX_CACHE_HOST, NIX_CACHE_HOST_KEY, REMOTE_BUILDER_USER, REMOTE_BUILDER_KEY
+
+set -euo pipefail
+
+: "${NIX_CACHE_HOST:=nix-cache}"
+: "${NIX_CACHE_HOST_KEY:=ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPeWgMsdaiz4axT/deFc1+0B5bN+GX/NOeW9bbQ0c/IT lxc-nix-cache}"
+: "${REMOTE_BUILDER_USER:=nixremote}"
+
+CACHE_PUB_KEY="cache.local-1:usoWYanY3Kpq2+kDIS2nhWoLZiRxanmdysdzqCFBHW4="
+FALLBACK_URL="https://cache.nixos.org/"
+FALLBACK_PUB_KEY="cache.nixos.org-1:6NCHdD59X431o0gWypbMrAURkbJ16ZPMQFGspcDShjY="
+
+MARKER_BEGIN="# BEGIN nix-cache client config (configure-nix-cache-client.sh)"
+MARKER_END="# END nix-cache client config"
+
+# Mode: root uses system-wide paths and restarts the daemon; non-root uses
+# user-level paths and has no daemon to restart.
+if [[ "$EUID" -eq 0 ]]; then
+  install_mode="multi"
+  NIX_CONF="/etc/nix/nix.conf"
+  KNOWN_HOSTS="/etc/ssh/ssh_known_hosts"
+  : "${REMOTE_BUILDER_KEY:=/root/.ssh/id_ed25519}"
+else
+  install_mode="single"
+  NIX_CONF="${XDG_CONFIG_HOME:-$HOME/.config}/nix/nix.conf"
+  KNOWN_HOSTS="$HOME/.ssh/known_hosts"
+  : "${REMOTE_BUILDER_KEY:=$HOME/.ssh/id_ed25519}"
+fi
+
+dry_run=0
+with_remote_builder=1
+restart_daemon=1
+
+for arg in "$@"; do
+  case "$arg" in
+    --dry-run) dry_run=1 ;;
+    --no-remote-builder) with_remote_builder=0 ;;
+    --no-restart) restart_daemon=0 ;;
+    -h|--help)
+      sed -n '2,37p' "$0"
+      exit 0
+      ;;
+    *)
+      echo "ERROR: unknown argument: $arg" >&2
+      exit 1
+      ;;
+  esac
+done
+
+if ! command -v nix >/dev/null 2>&1; then
+  echo "ERROR: no 'nix' binary on PATH -- install the Nix package manager first." >&2
+  exit 1
+fi
+
+if [[ "$install_mode" == "multi" && ! -f "$NIX_CONF" ]]; then
+  echo "ERROR: $NIX_CONF not found -- expected an existing multi-user Nix install." >&2
+  exit 1
+fi
+
+# Single-user: create the config file if it doesn't exist yet.
+if [[ "$install_mode" == "single" && "$dry_run" -eq 0 ]]; then
+  mkdir -p "$(dirname "$NIX_CONF")"
+  [[ -f "$NIX_CONF" ]] || touch "$NIX_CONF"
+fi
+
+builder_line=""
+if [[ "$with_remote_builder" -eq 1 ]]; then
+  if [[ -f "$REMOTE_BUILDER_KEY" ]]; then
+    case "$(uname -m)" in
+      x86_64) nix_system="x86_64-linux" ;;
+      aarch64) nix_system="aarch64-linux" ;;
+      *)
+        echo "WARNING: unrecognized architecture '$(uname -m)' -- skipping remote builder, keeping substituter config." >&2
+        with_remote_builder=0
+        ;;
+    esac
+    if [[ "$with_remote_builder" -eq 1 ]]; then
+      builder_line="builders = ssh://${REMOTE_BUILDER_USER}@${NIX_CACHE_HOST} ${nix_system} ${REMOTE_BUILDER_KEY} 4 2 big-parallel,kvm,nixos-test,benchmark"
+    fi
+  else
+    echo "WARNING: $REMOTE_BUILDER_KEY not found -- skipping remote builder config (substituter still configured)." >&2
+    echo "  See docs/nix-cache.md 'Remote builder SSH keys' for how to install it, then re-run this script." >&2
+    with_remote_builder=0
+  fi
+fi
+
+block="$(cat <<EOF
+$MARKER_BEGIN
+extra-substituters = http://${NIX_CACHE_HOST} ${FALLBACK_URL}
+extra-trusted-public-keys = ${CACHE_PUB_KEY} ${FALLBACK_PUB_KEY}
+EOF
+)"
+if [[ "$with_remote_builder" -eq 1 ]]; then
+  block="${block}
+builders-use-substitutes = true
+${builder_line}"
+fi
+block="${block}
+$MARKER_END"
+
+echo "== nix.conf block to install ($NIX_CONF) =="
+echo "$block"
+echo "================================"
+
+if [[ "$dry_run" -eq 1 ]]; then
+  echo "(--dry-run: not writing $NIX_CONF)"
+else
+  tmp_conf="$(mktemp)"
+  trap 'rm -f "$tmp_conf"' EXIT
+
+  if grep -qF "$MARKER_BEGIN" "$NIX_CONF"; then
+    awk -v begin="$MARKER_BEGIN" -v end="$MARKER_END" -v block="$block" '
+      $0 == begin { print block; skip = 1; next }
+      $0 == end   { skip = 0; next }
+      skip        { next }
+      { print }
+    ' "$NIX_CONF" > "$tmp_conf"
+  else
+    cp "$NIX_CONF" "$tmp_conf"
+    printf '\n%s\n' "$block" >> "$tmp_conf"
+  fi
+
+  cp "$NIX_CONF" "${NIX_CONF}.bak.$(date +%Y%m%d%H%M%S)"
+  install -m 0644 "$tmp_conf" "$NIX_CONF"
+  echo "Updated $NIX_CONF (backup saved alongside it)."
+fi
+
+if [[ "$with_remote_builder" -eq 1 ]]; then
+  known_hosts_line="${NIX_CACHE_HOST} ${NIX_CACHE_HOST_KEY}"
+  if [[ "$dry_run" -eq 1 ]]; then
+    echo "(--dry-run: would ensure this line is present in $KNOWN_HOSTS)"
+    echo "  $known_hosts_line"
+  else
+    mkdir -p "$(dirname "$KNOWN_HOSTS")"
+    touch "$KNOWN_HOSTS"
+    if ! grep -qF "$known_hosts_line" "$KNOWN_HOSTS" 2>/dev/null; then
+      echo "$known_hosts_line" >> "$KNOWN_HOSTS"
+      echo "Added nix-cache's SSH host key to $KNOWN_HOSTS."
+    fi
+  fi
+fi
+
+# Only restart the daemon for multi-user installs -- single-user has no daemon.
+if [[ "$dry_run" -eq 0 && "$restart_daemon" -eq 1 && "$install_mode" == "multi" ]]; then
+  if command -v systemctl >/dev/null 2>&1 && systemctl is-active --quiet nix-daemon 2>/dev/null; then
+    systemctl restart nix-daemon
+    echo "Restarted nix-daemon to pick up the new config."
+  else
+    echo "nix-daemon not managed by systemd (or not running) -- restart it manually to pick up the new config."
+  fi
+fi
+
+cat <<EOF
+
+Done. Verify with:
+  curl http://${NIX_CACHE_HOST}/nix-cache-info
+  nix show-config | grep -E 'substituters|trusted-public-keys|builders'
+EOF
+if [[ "$with_remote_builder" -eq 1 ]]; then
+  cat <<EOF
+  ssh -i ${REMOTE_BUILDER_KEY} ${REMOTE_BUILDER_USER}@${NIX_CACHE_HOST} nix-store --version
+  nix build nixpkgs#hello -L
+EOF
+fi

scripts/proxmox/create-proxmox-resource.sh

@@ -0,0 +1,860 @@
+#!/usr/bin/env bash
+# Creates new Proxmox VMs/LXC containers from this flake, and reconfigures
+# existing ones -- the manual workflows in docs/proxmox-images.md (VM) and
+# docs/auto-installer.md's "LXC hosts" section (container), automated.
+#
+# Images are built directly on the Proxmox node (PROXMOX_REMOTE_REPO_DIR /
+# --remote-repo-dir in scripts/env.sh), not on whatever machine runs this
+# script -- there's no multi-gigabyte image to transfer afterward. The first
+# time a node doesn't have that repo path yet, it's bootstrapped: cloned from
+# this checkout's own `origin` remote, then scripts/codex-setup.sh installs
+# the build tooling (Nix, etc.). Every run after that just `git pull`s it and
+# copies over the locally-managed host-keys/ (gitignored, so a git pull
+# alone wouldn't carry it) before building.
+#
+# --node (default: $PROXMOX_HOST, see scripts/env.sh) picks which of the two
+# LAN Proxmox nodes this runs against: production, pve1.sweet.home
+# ($PVE1_HOST, PROXMOX_HOST's own default), or the sandbox node,
+# pve-test.sweet.home ($PVE_TEST_HOST) -- pass --node "$PVE_TEST_HOST" (or
+# set PROXMOX_HOST=$PVE_TEST_HOST) to target the sandbox instead. See
+# CLAUDE.md's "Two Proxmox nodes" section: an agent session should default
+# to pve-test and only touch pve1 when the operator has explicitly said so
+# for the current task -- this script itself doesn't enforce that (its own
+# default is production, matching this repo's behavior before pve-test
+# existed), it's a policy for whoever/whatever is driving it.
+#
+# Usage:
+#   scripts/proxmox/create-proxmox-resource.sh --type lxc|vm --host <name> [options]
+#   scripts/proxmox/create-proxmox-resource.sh --type lxc|vm --list
+#   scripts/proxmox/create-proxmox-resource.sh --modify --vmid <n> [--cores N] [--memory MB] [--grow-disk GB]
+#
+# SAFETY:
+#   - The default (create) mode only ever creates a NEW resource -- it
+#     refuses to run if the target VMID already exists on the node, or if
+#     a VM/CT identified as --host already exists under any other VMID
+#     (checked live against the node; --allow-duplicate-host overrides).
+#   - --allow-duplicate-host distinguishes an exact match (same --type
+#     *and* --host, e.g. re-running --type lxc --host docker while an
+#     lxc-docker container already exists -- almost always a redeploy of
+#     the same target to pick up a rebuilt image) from a cross-type match
+#     (a different platform sharing the same host identity, e.g. a
+#     proxmox-docker VM coexisting with lxc-docker). Only the exact match
+#     is destroyed and replaced, after typing the hostname back to
+#     confirm (outside --dry-run) -- a cross-type match is always left
+#     untouched, matching-or-not.
+#   - --modify only ever touches a resource you name explicitly via
+#     --vmid, shows exactly what will change first, and (outside
+#     --dry-run) always requires typing that VMID back to confirm before
+#     anything is sent to the node. There is no bulk/implicit modify.
+#   - Outside of --allow-duplicate-host's exact-match replace above,
+#     neither mode can start/stop/delete a resource.
+#
+# See --help for the full option list.
+set -euo pipefail
+
+repo_root="$(cd "$(dirname "$0")/../.." && pwd)"
+# shellcheck source=../env.sh
+source "${repo_root}/scripts/env.sh"
+# shellcheck source=../lib/nix-eval.sh
+source "${repo_root}/scripts/lib/nix-eval.sh"
+# shellcheck source=../lib/confirm.sh
+source "${repo_root}/scripts/lib/confirm.sh"
+
+sync_keys="${repo_root}/scripts/secrets/sync-host-keys.sh"
+
+usage() {
+  cat <<EOF
+Usage: $0 --type lxc|vm --host <name> [options]      (create)
+       $0 --type lxc|vm --list                        (list --host values)
+       $0 --modify --vmid <n> [options]                (reconfigure)
+
+Create mode (default):
+  --type lxc|vm        lxc = container, built as a CT template tarball.
+                        vm  = VM, built as a Disko .raw disk image (UEFI/OVMF).
+  --host <name>         Which host identity to deploy -- matches
+                        config.networking.hostName (server, docker,
+                        nix-cache, nixos, pxe-boot, nix-minimal). Use
+                        --list to see what's available for --type.
+  --name <name>          Proxmox display name/hostname (default: --host's
+                          value, e.g. nix-cache -- for lxc this becomes the
+                          guest's real networking.hostName too, since
+                          proxmoxLXC.manageHostName pulls it from Proxmox's
+                          own container config, so it must match host.nix
+                          regardless of build type)
+  --vmid <n>              Numeric VMID (default: next free, via
+                          \`pvesh get /cluster/nextid\` on the node).
+                          Refuses to run if this ID already exists.
+  --disk-size <GB>           lxc only: rootfs size for \`pct create\`
+                              (default: \$PROXMOX_DEFAULT_LXC_DISK_GB, ${PROXMOX_DEFAULT_LXC_DISK_GB}).
+  --image <path>              Use this local image/tarball (uploaded to the
+                              node via scp) instead of checking the node /
+                              building one there from the flake.
+  --force-rebuild                Skip the "does the node already have this
+                                  image" check -- always build fresh and
+                                  overwrite what's there.
+  --remote-repo-dir <path>       Where this flake repo lives (or gets
+                                  cloned) on the node, and is built from
+                                  (default: \$PROXMOX_REMOTE_REPO_DIR, ${PROXMOX_REMOTE_REPO_DIR}).
+  --allow-duplicate-host        Required if a VM/CT identified as --host
+                                already exists on the node (checked live via
+                                qm/pct, not any file in this repo) --
+                                otherwise refused, since it'd share that
+                                host's hostName/hostId. An existing resource
+                                of this *same* --type (e.g. re-running --type
+                                lxc --host docker over an existing lxc-docker)
+                                is destroyed and replaced, after confirming --
+                                a different --type sharing the same --host
+                                (e.g. a proxmox-docker VM) is always left
+                                untouched.
+
+Modify mode (reconfigure an EXISTING resource -- requires --modify):
+  --modify                Switch to modify mode.
+  --vmid <n>                Required: which existing resource to change.
+                            Type/VM-vs-CT is auto-detected on the node.
+  --grow-disk <GB>            Grow the primary disk by this many GB
+                              (qm/pct resize; Proxmox only supports
+                              growing, never shrinking, an existing disk).
+  At least one of --cores / --memory / --grow-disk is required. Always
+  prints the current -> new values and requires typing the VMID back to
+  confirm, even outside --dry-run.
+
+Shared:
+  --cores <n>              create: default \$PROXMOX_DEFAULT_CORES (${PROXMOX_DEFAULT_CORES}).
+                            modify: omit to leave unchanged.
+  --memory <MB>              create: default \$PROXMOX_DEFAULT_MEMORY_MB (${PROXMOX_DEFAULT_MEMORY_MB}).
+                              modify: omit to leave unchanged.
+  --swap <MB>                 lxc only, create time: \`--memory\` doesn't
+                              touch swap -- it silently stays at Proxmox's
+                              own 512M default otherwise. (default: matches
+                              whatever --memory resolves to)
+  --storage <pool>              (default: \$PROXMOX_STORAGE, ${PROXMOX_STORAGE})
+  --iso-storage <pool>            (default: \$PROXMOX_ISO_STORAGE, ${PROXMOX_ISO_STORAGE})
+  --bridge <bridge>                (default: \$PROXMOX_BRIDGE, ${PROXMOX_BRIDGE})
+  --node <host>                     Proxmox node to SSH into (default:
+                                    \$PROXMOX_HOST, ${PROXMOX_HOST} --
+                                    production; the sandbox node is
+                                    \$PVE_TEST_HOST, ${PVE_TEST_HOST}).
+  --dry-run                           Print the full plan; touch nothing
+                                      local or remote, no prompts.
+  -h, --help
+
+Config for --storage/--bridge/--node/etc. lives in scripts/env.sh -- edit
+that instead of passing the same flag every time.
+EOF
+}
+
+dry_run=0
+modify=0
+type=""
+host=""
+name=""
+vmid=""
+cores=""
+memory=""
+swap=""
+disk_size=""
+grow_disk=""
+image=""
+storage="$PROXMOX_STORAGE"
+iso_storage="$PROXMOX_ISO_STORAGE"
+bridge="$PROXMOX_BRIDGE"
+node="$PROXMOX_HOST"
+remote_repo_dir="$PROXMOX_REMOTE_REPO_DIR"
+do_list=0
+allow_duplicate_host=0
+force_rebuild=0
+
+while [[ $# -gt 0 ]]; do
+  case "$1" in
+  --type) type="$2"; shift 2 ;;
+  --host) host="$2"; shift 2 ;;
+  --name) name="$2"; shift 2 ;;
+  --vmid) vmid="$2"; shift 2 ;;
+  --cores) cores="$2"; shift 2 ;;
+  --memory) memory="$2"; shift 2 ;;
+  --swap) swap="$2"; shift 2 ;;
+  --disk-size) disk_size="$2"; shift 2 ;;
+  --grow-disk) grow_disk="$2"; shift 2 ;;
+  --image) image="$2"; shift 2 ;;
+  --storage) storage="$2"; shift 2 ;;
+  --iso-storage) iso_storage="$2"; shift 2 ;;
+  --bridge) bridge="$2"; shift 2 ;;
+  --node) node="$2"; shift 2 ;;
+  --remote-repo-dir) remote_repo_dir="$2"; shift 2 ;;
+  --list) do_list=1; shift ;;
+  --allow-duplicate-host) allow_duplicate_host=1; shift ;;
+  --force-rebuild) force_rebuild=1; shift ;;
+  --modify) modify=1; shift ;;
+  --dry-run) dry_run=1; shift ;;
+  -h | --help) usage; exit 0 ;;
+  *) echo "Unknown option: $1" >&2; usage >&2; exit 1 ;;
+  esac
+done
+
+ssh_target="${PROXMOX_SSH_USER}@${node}"
+
+# Proxmox tools (pvesh, qm, pct) require root access to the cluster IPC
+# socket. When SSH-ing as a non-root user with sudo, prefix every remote
+# Proxmox command with sudo.
+sudo_prefix=""
+sudo_display=""
+if [[ "$PROXMOX_SSH_USER" != "root" ]]; then
+  sudo_prefix="sudo"
+  sudo_display="sudo "
+fi
+
+remote() {
+  if [[ "$dry_run" -eq 1 ]]; then
+    echo "[dry-run] ssh ${ssh_target} -- $*"
+  else
+    ssh "$ssh_target" "$@"
+  fi
+}
+
+# ============================================================ modify mode
+cmd_modify() {
+  if [[ -z "$vmid" ]]; then
+    echo "ERROR: --modify requires --vmid." >&2
+    exit 1
+  fi
+  if [[ -z "$cores" && -z "$memory" && -z "$grow_disk" ]]; then
+    echo "ERROR: --modify needs at least one of --cores / --memory / --grow-disk." >&2
+    exit 1
+  fi
+
+  echo "Looking up VMID ${vmid} on ${node}..."
+  local kind current_cores current_memory disk_key
+  if ssh "$ssh_target" "${sudo_prefix} qm status ${vmid}" >/dev/null 2>&1; then
+    kind="vm"
+    disk_key="scsi0"
+  elif ssh "$ssh_target" "${sudo_prefix} pct status ${vmid}" >/dev/null 2>&1; then
+    kind="lxc"
+    disk_key="rootfs"
+  else
+    echo "ERROR: VMID ${vmid} doesn't exist on ${node} -- nothing to modify." >&2
+    exit 1
+  fi
+
+  local config_cmd="${sudo_prefix} qm config ${vmid}"
+  [[ "$kind" == "lxc" ]] && config_cmd="${sudo_prefix} pct config ${vmid}"
+  local current_config
+  current_config="$(ssh "$ssh_target" "$config_cmd")"
+  current_cores="$(echo "$current_config" | grep -oP '^cores:\s*\K\S+' || echo '?')"
+  current_memory="$(echo "$current_config" | grep -oP '^memory:\s*\K\S+' || echo '?')"
+
+  echo
+  echo "VMID ${vmid} is a ${kind} on ${node}. Planned changes:"
+  [[ -n "$cores" ]] && echo "  cores:  ${current_cores} -> ${cores}"
+  [[ -n "$memory" ]] && echo "  memory: ${current_memory} MB -> ${memory} MB"
+  [[ -n "$grow_disk" ]] && echo "  ${disk_key}: grow by +${grow_disk}G (Proxmox can only grow, not shrink, an existing disk)"
+
+  if [[ "$dry_run" -eq 1 ]]; then
+    echo
+    echo "[dry-run] Nothing was changed."
+    return
+  fi
+
+  echo
+  if ! confirm_typed "$vmid" "Type the VMID (${vmid}) to confirm these changes: "; then
+    echo "Cancelled -- input didn't match ${vmid}."
+    exit 1
+  fi
+
+  local set_cmd="${sudo_prefix} qm set"
+  local resize_cmd="${sudo_prefix} qm resize"
+  [[ "$kind" == "lxc" ]] && set_cmd="${sudo_prefix} pct set" && resize_cmd="${sudo_prefix} pct resize"
+
+  if [[ -n "$cores" || -n "$memory" ]]; then
+    local args=""
+    [[ -n "$cores" ]] && args="${args} --cores ${cores}"
+    [[ -n "$memory" ]] && args="${args} --memory ${memory}"
+    remote "${set_cmd} ${vmid}${args}"
+  fi
+  if [[ -n "$grow_disk" ]]; then
+    remote "${resize_cmd} ${vmid} ${disk_key} +${grow_disk}G"
+  fi
+
+  echo
+  echo "Done. VMID ${vmid} updated."
+}
+
+if [[ "$modify" -eq 1 ]]; then
+  cmd_modify
+  exit 0
+fi
+
+# ============================================================= create mode
+if [[ "$type" != "lxc" && "$type" != "vm" ]]; then
+  echo "ERROR: --type must be 'lxc' or 'vm'." >&2
+  usage >&2
+  exit 1
+fi
+
+platform_prefix="lxc"
+[[ "$type" == "vm" ]] && platform_prefix="proxmox"
+[[ -z "$cores" ]] && cores="$PROXMOX_DEFAULT_CORES"
+[[ -z "$memory" ]] && memory="$PROXMOX_DEFAULT_MEMORY_MB"
+
+# --- discover / resolve the flake target from --host --------------------
+# Emits "<target>\t<hostName>" pairs for every ${platform_prefix}-* flake
+# target -- the one source both --list and the --host lookup below read
+# from, so they can never see a different set of targets from each other.
+targets_for_platform() {
+  local target
+  for target in $(list_flake_targets "$repo_root" 2>/dev/null | grep -- "^${platform_prefix}-"); do
+    printf '%s\t%s\n' "$target" "$(flake_target_hostname "$repo_root" "$target")"
+  done
+}
+
+list_hosts() {
+  local target hostname
+  while IFS=$'\t' read -r target hostname; do
+    printf '  %-12s -> %s\n' "$hostname" "$target"
+  done < <(targets_for_platform)
+}
+
+if [[ "$do_list" -eq 1 ]]; then
+  echo "Available --host values for --type ${type}:"
+  list_hosts
+  exit 0
+fi
+
+if [[ -z "$host" ]]; then
+  echo "ERROR: --host is required (or use --list to see options)." >&2
+  exit 1
+fi
+
+flake_target=""
+while IFS=$'\t' read -r target hostname; do
+  if [[ "$hostname" == "$host" ]]; then
+    flake_target="$target"
+    break
+  fi
+done < <(targets_for_platform)
+
+if [[ -z "$flake_target" ]]; then
+  echo "ERROR: no ${platform_prefix}-* target has hostName '${host}'." >&2
+  echo "Available:" >&2
+  list_hosts >&2
+  exit 1
+fi
+
+# The container/VM's real identity is --host (e.g. "nix-cache"), validated
+# above against config.networking.hostName -- not the flake target name
+# (e.g. "lxc-nix-cache"), which is build-type-specific and only exists to
+# pick which platform variant to build. Defaulting --name to the flake
+# target would make lxc's --hostname (which proxmoxLXC.manageHostName
+# feeds straight into the guest's real hostname) disagree with host.nix.
+[[ -z "$name" ]] && name="$host"
+
+# --- refuse to duplicate a host that's already live on the node ---------
+# Queries the node itself (qm/pct's own name/hostname config), not any
+# static list in this repo -- a file can't track whether a resource still
+# actually exists, and this used to be checked against variables.nix's
+# deployedTargets, which drifted stale (it kept naming a VM as "the real
+# deployment" well after that VM had been destroyed, blocking its own
+# redeploy) until that list was dropped in favour of this live check. This
+# only catches guests identified with the default --name (== --host, what
+# this script itself always uses unless --name is overridden) -- a guest
+# manually renamed on the node afterwards wouldn't match, but nothing here
+# creates guests that way.
+if [[ "$dry_run" -eq 1 ]]; then
+  echo
+  echo "[dry-run] would check ${node} for an existing VM/CT identified as '${host}'"
+  if [[ "$allow_duplicate_host" -eq 1 ]]; then
+    echo "[dry-run] --allow-duplicate-host: an existing ${type} named '${host}' would be" \
+      "destroyed and replaced; a different-type match would be left untouched"
+  fi
+else
+  echo
+  echo "==> Checking ${node} for an existing VM/CT identified as '${host}'..."
+  ssh_check_status=0
+  existing="$(ssh "$ssh_target" bash -s -- "$host" "$sudo_prefix" <<'REMOTE_SCRIPT'
+target="$1"
+sudo_pfx="$2"
+for id in $($sudo_pfx qm list 2>/dev/null | awk 'NR>1{print $1}'); do
+  n="$($sudo_pfx qm config "$id" 2>/dev/null | grep -oP '^name:\s*\K\S+' || true)"
+  [[ "$n" == "$target" ]] && echo "vm ${id} ${n}"
+done
+for id in $($sudo_pfx pct list 2>/dev/null | awk 'NR>1{print $1}'); do
+  n="$($sudo_pfx pct config "$id" 2>/dev/null | grep -oP '^hostname:\s*\K\S+' || true)"
+  [[ "$n" == "$target" ]] && echo "lxc ${id} ${n}"
+done
+exit 0
+REMOTE_SCRIPT
+  )" || ssh_check_status=$?
+  if [[ "$ssh_check_status" -ne 0 ]]; then
+    echo "ERROR: couldn't reach ${node} (ssh exited ${ssh_check_status}) to check for an" >&2
+    echo "existing '${host}' resource -- refusing to guess. Fix connectivity and retry," >&2
+    echo "or pass --allow-duplicate-host if you're sure none exists (this skips the" >&2
+    echo "check entirely)." >&2
+    exit 1
+  fi
+
+  # Split into "exact" (same resource kind as --type -- i.e. literally this
+  # same host+platform combo already exists, almost always a redeploy of
+  # the same target to test a rebuilt image) vs "cross-type" (a different
+  # platform sharing this host identity, e.g. a stopped proxmox-docker VM
+  # coexisting with an lxc-docker container -- a deliberate, valid setup
+  # this script has never managed and still won't). Read via a herestring
+  # (not a pipe) so the appends below survive outside the loop.
+  this_kind="$type"
+  exact_matches=""
+  cross_matches=""
+  if [[ -n "$existing" ]]; then
+    while read -r kind id n; do
+      [[ -z "$kind" ]] && continue
+      if [[ "$kind" == "$this_kind" ]]; then
+        exact_matches+="${kind} ${id} ${n}"$'\n'
+      else
+        cross_matches+="${kind} ${id} ${n}"$'\n'
+      fi
+    done <<<"$existing"
+  fi
+
+  if [[ -n "$exact_matches" && "$allow_duplicate_host" -ne 1 ]]; then
+    echo "ERROR: '${host}' already exists on ${node} as this same resource type:" >&2
+    echo "$exact_matches" | while read -r kind id n; do
+      [[ -z "$kind" ]] && continue
+      echo "  - ${kind} VMID ${id} (${n})" >&2
+    done
+    echo "Refusing to create a second ${this_kind} sharing this identity. Pass" >&2
+    echo "--allow-duplicate-host to destroy it and create a fresh one in its place" >&2
+    echo "(after confirming), or use --modify to reconfigure the existing one instead." >&2
+    exit 1
+  fi
+
+  if [[ -n "$cross_matches" && "$allow_duplicate_host" -ne 1 ]]; then
+    echo "ERROR: '${host}' already exists on ${node} as a different resource type:" >&2
+    echo "$cross_matches" | while read -r kind id n; do
+      [[ -z "$kind" ]] && continue
+      echo "  - ${kind} VMID ${id} (${n})" >&2
+    done
+    echo "Refusing to create a second resource sharing this identity. Pass" >&2
+    echo "--allow-duplicate-host to create one anyway (it gets its own distinct" >&2
+    echo "sops key and VMID -- the existing resource above is left untouched)," >&2
+    echo "or use --modify to reconfigure the existing one instead." >&2
+    exit 1
+  fi
+
+  if [[ -n "$cross_matches" ]]; then
+    echo "--allow-duplicate-host: '${host}' also exists on ${node} as a different resource" \
+      "type -- leaving it untouched:"
+    echo "$cross_matches" | while read -r kind id n; do
+      [[ -z "$kind" ]] && continue
+      echo "  - ${kind} VMID ${id} (${n})"
+    done
+  fi
+
+  if [[ -n "$exact_matches" ]]; then
+    echo "--allow-duplicate-host: '${host}' already exists on ${node} as this same resource" \
+      "type -- it will be destroyed and replaced:"
+    echo "$exact_matches" | while read -r kind id n; do
+      [[ -z "$kind" ]] && continue
+      echo "  - ${kind} VMID ${id} (${n})"
+    done
+    echo
+    if ! confirm_typed "$host" "Type the hostname (${host}) to confirm destroying the above and replacing it: "; then
+      echo "Cancelled -- input didn't match ${host}." >&2
+      exit 1
+    fi
+    echo "$exact_matches" | while read -r kind id n; do
+      [[ -z "$kind" ]] && continue
+      echo "==> Destroying ${kind} VMID ${id} (${n})..."
+      if [[ "$kind" == "vm" ]]; then
+        # qm destroy has no --force to stop-then-destroy in one call (pct's
+        # does) -- stop explicitly first if it's running.
+        if ssh "$ssh_target" "${sudo_prefix} qm status ${id}" 2>/dev/null | grep -q running; then
+          ssh "$ssh_target" "${sudo_prefix} qm stop ${id}"
+        fi
+        ssh "$ssh_target" "${sudo_prefix} qm destroy ${id} --purge 1"
+      else
+        ssh "$ssh_target" "${sudo_prefix} pct destroy ${id} --force 1 --purge 1"
+      fi
+    done
+  fi
+fi
+
+echo "Target: ${flake_target} (host=${host}, type=${type}) -> Proxmox resource '${name}'"
+
+# Decide on nix-cache once, here -- this is the earliest point that needs
+# it (sync-host-keys.sh below needs nix-shell packages regardless of
+# whether an image ends up getting built later), and the decision is
+# exported so that subprocess -- and this script's own later build step,
+# if it gets there -- both reuse it instead of probing again.
+nix_extra_opts
+
+# --- make sure this target has a registered host key --------------------
+echo
+echo "==> Ensuring host key exists and is registered..."
+sync_args=("$flake_target")
+[[ "$dry_run" -eq 1 ]] && sync_args+=(--dry-run)
+bash "$sync_keys" "${sync_args[@]}"
+
+# --- VMID: pick one, and refuse to touch anything that already exists ---
+echo
+if [[ -z "$vmid" ]]; then
+  if [[ "$dry_run" -eq 1 ]]; then
+    vmid="<next-free-vmid>"
+    echo "[dry-run] would ask ${node} for the next free VMID (pvesh get /cluster/nextid)"
+  else
+    vmid="$(ssh "$ssh_target" "${sudo_prefix} pvesh get /cluster/nextid" | tr -d '[:space:]')"
+    echo "Auto-assigned VMID: ${vmid}"
+  fi
+else
+  echo "Requested VMID: ${vmid}"
+fi
+
+if [[ "$dry_run" -eq 0 ]]; then
+  # qm/pct status exits non-zero (and prints "does not exist") for a free
+  # ID on that resource type -- but a VMID could exist as the OTHER
+  # resource type (e.g. requested a CT id that's actually a VM), so check
+  # both. Any success here means something is already using this ID --
+  # refuse to go anywhere near it. (Reconfiguring an existing resource is
+  # --modify's job, not this one's.)
+  if ssh "$ssh_target" "${sudo_prefix} qm status ${vmid}" >/dev/null 2>&1 \
+    || ssh "$ssh_target" "${sudo_prefix} pct status ${vmid}" >/dev/null 2>&1; then
+    echo "ERROR: VMID ${vmid} already exists on ${node}. Refusing to touch an" >&2
+    echo "existing resource here -- use --modify to reconfigure it, pick a" >&2
+    echo "different --vmid, or omit it to auto-assign." >&2
+    exit 1
+  fi
+fi
+
+# --- resolve the remote path -- fixed naming (not the nix store's own
+# derivation-hash-based filename), so a later run can check for it by name.
+# lxc uploads as a CT *template* (Proxmox's "vztmpl" content type, under
+# iso_storage) -- config.system.build.tarball is a plain rootfs tarball,
+# not a vzdump backup archive, so it's created with `pct create ... vztmpl`,
+# not restored with `pct restore` (that expects backup-archive metadata
+# this tarball doesn't have, and fails with "archive contains no
+# configuration file").
+remote_dir="/var/lib/vz/import"
+remote_filename="${flake_target}.raw"
+if [[ "$type" == "lxc" ]]; then
+  remote_dir="/var/lib/vz/template/cache"
+  remote_filename="${flake_target}.tar.xz"
+fi
+remote_path="${remote_dir}/${remote_filename}"
+
+# --- ensure the flake repo (+ tooling) exists on the node, and is current --
+# Bootstraps once (git clone from this checkout's own `origin`, then
+# scripts/codex-setup.sh installs Nix + friends) if ${remote_repo_dir}
+# doesn't exist yet on the node; otherwise just `git pull`s it, so the image
+# built there reflects what's actually committed and pushed. Only called
+# right before an actual remote build below -- reusing an image already on
+# the node, or an explicit --image, never touch the node's checkout at all.
+ensure_remote_repo() {
+  echo
+  echo "==> Ensuring ${remote_repo_dir} exists and is current on ${node}..."
+  if [[ "$dry_run" -eq 1 ]]; then
+    echo "[dry-run] would ensure ${remote_repo_dir} exists on ${node} (clone if missing, git pull if present), and would verify/bootstrap build tooling there (scripts/codex-setup.sh) if \`nix\` isn't already on PATH -- and if that bootstrap actually ran, would also configure ${node} as a nix-cache client (scripts/proxmox/configure-nix-cache-client.sh)"
+    return
+  fi
+
+  if ssh "$ssh_target" "test -d '${remote_repo_dir}/.git'"; then
+    echo "Repo present -- pulling latest..."
+    ssh "$ssh_target" "cd '${remote_repo_dir}' && git pull --ff-only"
+  else
+    local origin_url
+    origin_url="$(git -C "$repo_root" remote get-url origin 2>/dev/null || true)"
+    if [[ -z "$origin_url" ]]; then
+      echo "ERROR: ${remote_repo_dir} doesn't exist on ${node}, and this checkout has no" >&2
+      echo "'origin' remote to clone from. Set one (git remote add origin <url>) or create" >&2
+      echo "${remote_repo_dir} on ${node} yourself (e.g. git clone), then re-run." >&2
+      exit 1
+    fi
+    echo "Not present -- cloning from ${origin_url}..."
+    ssh "$ssh_target" "git clone '${origin_url}' '${remote_repo_dir}'"
+  fi
+
+  # Trivial check, run every time (not just right after a fresh clone) --
+  # confirmed live: a first bootstrap can clone the repo successfully and
+  # still leave the node without a working `nix` (e.g. the node had no
+  # `sudo`, which the Nix installer's root path depends on -- see the fix
+  # in scripts/codex-setup.sh), and a later run with the repo already
+  # present would otherwise never retry it. Sources
+  # scripts/lib/nix-bootstrap.sh's ensure_nix_profile first -- a
+  # single-user Nix install typically only gets sourced into login shells,
+  # and ssh's non-interactive command execution is neither, so a
+  # freshly-installed `nix` still wouldn't be on PATH here without it.
+  #
+  # Just `nix` today -- the only thing the remote build commands below
+  # actually invoke -- but a list (not a single hardcoded check) so a
+  # future remote step needing another tool can add itself here instead of
+  # growing a parallel check.
+  local remote_required_cmds=(nix)
+  local tooling_check_cmd="cd '${remote_repo_dir}' && . scripts/lib/nix-bootstrap.sh && ensure_nix_profile"
+  local cmd
+  for cmd in "${remote_required_cmds[@]}"; do
+    tooling_check_cmd="${tooling_check_cmd} && command -v ${cmd}"
+  done
+
+  if ssh "$ssh_target" "$tooling_check_cmd" >/dev/null 2>&1; then
+    echo "Build tooling already present on ${node}."
+  else
+    echo "==> Bootstrapping build tooling on ${node} (scripts/codex-setup.sh)..."
+    ssh "$ssh_target" "cd '${remote_repo_dir}' && bash scripts/codex-setup.sh"
+
+    # Only on this first-time bootstrap, not every run -- a node that
+    # already has tooling either already went through this once, or had
+    # it configured some other way, and re-running is harmless but
+    # pointless. Non-fatal: this only makes the node's own builds faster
+    # (substitute from nix-cache instead of building from source) and
+    # offloadable to it as a remote builder -- worth trying, not worth
+    # aborting the image build over if nix-cache happens to be down right
+    # now. Needs ensure_nix_profile first, same as the tooling_check_cmd
+    # above -- ssh's non-interactive command execution won't have picked
+    # up a freshly single-user-installed `nix` otherwise.
+    echo "==> Configuring ${node} as a nix-cache substituter/remote-builder client..."
+    if ! ssh "$ssh_target" "cd '${remote_repo_dir}' && . scripts/lib/nix-bootstrap.sh && ensure_nix_profile && bash scripts/proxmox/configure-nix-cache-client.sh"; then
+      echo "WARNING: configure-nix-cache-client.sh failed on ${node} -- continuing without it (${node} will build from source / against cache.nixos.org only)." >&2
+    fi
+  fi
+}
+
+# --- sync locally-managed host-keys/ to the node ---------------------------
+# Gitignored (see .gitignore), so `git pull` above never carries it -- both
+# build paths need it present as NIXOS_HOST_KEYS_DIR / --pre-format-files
+# input on the node itself now that the build runs there. scp (not rsync,
+# not already a dependency anywhere else in this repo) mirrors how this
+# script already transfers the --image case below.
+sync_remote_host_keys() {
+  echo
+  echo "==> Syncing host-keys/ to ${node}..."
+  if [[ "$dry_run" -eq 1 ]]; then
+    echo "[dry-run] would copy ${repo_root}/host-keys/ to ${ssh_target}:${remote_repo_dir}/host-keys/"
+    return
+  fi
+  ssh "$ssh_target" "mkdir -p '${remote_repo_dir}/host-keys'"
+  scp -pr "${repo_root}/host-keys/." "${ssh_target}:${remote_repo_dir}/host-keys/"
+}
+
+# --- build (or reuse an image already on the node) ------------------------
+echo
+local_image=""
+image_already_remote=0
+
+if [[ -n "$image" ]]; then
+  [[ -f "$image" ]] || { echo "ERROR: --image '${image}' not found." >&2; exit 1; }
+  local_image="$image"
+  echo "Using provided image: ${local_image}"
+elif [[ "$force_rebuild" -eq 1 ]]; then
+  echo "--force-rebuild: skipping the existing-image check on ${node}."
+else
+  echo "==> Checking whether ${node} already has ${remote_path}..."
+  if [[ "$dry_run" -eq 1 ]]; then
+    echo "[dry-run] would check: ssh ${ssh_target} -- test -f ${remote_path}"
+  elif ssh "$ssh_target" "test -f '${remote_path}'" 2>/dev/null; then
+    echo "Found it -- reusing, skipping build (use --force-rebuild to override)."
+    image_already_remote=1
+  else
+    echo "Not found -- will build."
+  fi
+fi
+
+if [[ "$image_already_remote" -eq 0 && -z "$local_image" ]]; then
+  ensure_remote_repo
+  sync_remote_host_keys
+
+  # Relayed into the remote build below exactly as decided by the local
+  # nix_extra_opts call earlier in this script -- that decision (whether
+  # nix-cache is reachable) is made once, locally, same as it always has
+  # been; only *where* the resulting "${NIX_OPTS[@]}" gets used as a `nix
+  # build` flag moves to the node. NIX_EXTRA_OPTS is already a %q-quoted
+  # string built for exactly this eval-based reconstruction (see env.sh).
+  nix_opts_display=""
+  if [[ ${#NIX_OPTS[@]} -gt 0 ]]; then
+    printf -v nix_opts_display '%q ' "${NIX_OPTS[@]}"
+    nix_opts_display=" ${nix_opts_display% }"
+  fi
+
+  if [[ "$type" == "lxc" ]]; then
+    if [[ "$dry_run" -eq 1 ]]; then
+      echo "[dry-run] would build on ${node}: NIXOS_HOST_KEYS_DIR=\$(pwd)/host-keys nix build --impure \\"
+      echo "[dry-run]   --no-use-registries --no-accept-flake-config${nix_opts_display} \\"
+      echo "[dry-run]   .#nixosConfigurations.${flake_target}.config.system.build.tarball"
+      echo "[dry-run] would stage the result at ${remote_path}"
+      local_image="<built-tarball>"
+    else
+      echo "==> Building LXC tarball for ${flake_target} on ${node}..."
+      # Built as a single already-%q-quoted command string, not separate ssh
+      # argv elements -- ssh joins remote command args with plain spaces and
+      # hands the result to the remote shell to re-split, which would
+      # otherwise scatter NIX_EXTRA_OPTS (itself several space-separated,
+      # %q-quoted tokens) across the wrong positional parameters below.
+      printf -v remote_cmd 'bash -s -- %q %q %q %q %q %q' \
+        "$remote_repo_dir" "$flake_target" "$remote_dir" "$remote_filename" "$NIX_EXTRA_OPTS" "$sudo_prefix"
+      ssh "$ssh_target" "$remote_cmd" <<'REMOTE_SCRIPT'
+set -euo pipefail
+repo_dir="$1"; target="$2"; dest_dir="$3"; dest_name="$4"; nix_extra_opts_str="$5"; sudo_pfx="$6"
+declare -a NIX_OPTS=()
+[[ -n "$nix_extra_opts_str" ]] && eval "NIX_OPTS=(${nix_extra_opts_str})"
+cd "$repo_dir"
+# A single-user Nix install only gets sourced into login shells; this ssh
+# session is neither, so `nix` wouldn't otherwise be on PATH here even
+# right after a successful install.
+. scripts/lib/nix-bootstrap.sh
+ensure_nix_profile
+NIXOS_HOST_KEYS_DIR="$(pwd)/host-keys" nix build --impure \
+  --no-use-registries --no-accept-flake-config "${NIX_OPTS[@]}" \
+  ".#nixosConfigurations.${target}.config.system.build.tarball" \
+  --out-link "result-${target}"
+built="$(find "result-${target}/tarball" -maxdepth 1 -type f | head -1)"
+if [[ -z "$built" ]]; then
+  echo "ERROR: no tarball found under result-${target}/tarball after build." >&2
+  exit 1
+fi
+$sudo_pfx mkdir -p "$dest_dir"
+$sudo_pfx cp "$built" "${dest_dir}/${dest_name}"
+echo "Built and staged: ${dest_dir}/${dest_name}"
+REMOTE_SCRIPT
+      local_image="$remote_path"
+      echo "Built on ${node}: ${remote_path}"
+    fi
+  else
+    if [[ "$dry_run" -eq 1 ]]; then
+      echo "[dry-run] would build on ${node}: nix build --no-use-registries --no-accept-flake-config${nix_opts_display} \\"
+      echo "[dry-run]   .#nixosConfigurations.${flake_target}.config.system.build.diskoImagesScript"
+      echo "[dry-run] would run:   ${sudo_display}./result-${flake_target} \\"
+      echo "[dry-run]                --pre-format-files host-keys/${flake_target}_ssh_host_ed25519_key /etc/ssh/ssh_host_ed25519_key \\"
+      echo "[dry-run]                --pre-format-files host-keys/${flake_target}_ssh_host_ed25519_key.pub /etc/ssh/ssh_host_ed25519_key.pub \\"
+      echo "[dry-run]                --build-memory 2048"
+      echo "[dry-run] would stage the result at ${remote_path}"
+      local_image="<built-image>.raw"
+    else
+      echo "==> Building Disko image for ${flake_target} on ${node}..."
+      # See the LXC branch above for why this is one %q-quoted command
+      # string rather than separate ssh argv elements.
+      printf -v remote_cmd 'bash -s -- %q %q %q %q %q %q' \
+        "$remote_repo_dir" "$flake_target" "$remote_dir" "$remote_filename" "$NIX_EXTRA_OPTS" "$sudo_prefix"
+      ssh "$ssh_target" "$remote_cmd" <<'REMOTE_SCRIPT'
+set -euo pipefail
+repo_dir="$1"; target="$2"; dest_dir="$3"; dest_name="$4"; nix_extra_opts_str="$5"; sudo_pfx="$6"
+declare -a NIX_OPTS=()
+[[ -n "$nix_extra_opts_str" ]] && eval "NIX_OPTS=(${nix_extra_opts_str})"
+cd "$repo_dir"
+. scripts/lib/nix-bootstrap.sh
+ensure_nix_profile
+nix build --no-use-registries --no-accept-flake-config "${NIX_OPTS[@]}" \
+  ".#nixosConfigurations.${target}.config.system.build.diskoImagesScript" \
+  --out-link "result-${target}"
+$sudo_pfx "./result-${target}" \
+  --pre-format-files "host-keys/${target}_ssh_host_ed25519_key" /etc/ssh/ssh_host_ed25519_key \
+  --pre-format-files "host-keys/${target}_ssh_host_ed25519_key.pub" /etc/ssh/ssh_host_ed25519_key.pub \
+  --build-memory 2048
+built="$(find . -maxdepth 1 -name '*.raw' -newer "result-${target}" | head -1)"
+if [[ -z "$built" ]]; then
+  echo "ERROR: no .raw image found in ${repo_dir} after build." >&2
+  exit 1
+fi
+$sudo_pfx mkdir -p "$dest_dir"
+$sudo_pfx mv "$built" "${dest_dir}/${dest_name}"
+echo "Built and staged: ${dest_dir}/${dest_name}"
+REMOTE_SCRIPT
+      local_image="$remote_path"
+      echo "Built on ${node}: ${remote_path}"
+    fi
+  fi
+fi
+
+# --- upload -- only for an explicit --image; a build above stages its
+# result directly at ${remote_path} on the node already, and reusing an
+# image already on the node needs nothing transferred either. ------------
+echo
+if [[ -n "$image" ]]; then
+  if [[ "$dry_run" -eq 1 ]]; then
+    echo "[dry-run] would upload: scp ${local_image} ${ssh_target}:${remote_path}"
+  else
+    echo "==> Uploading to ${node}:${remote_path}..."
+    ssh "$ssh_target" "mkdir -p ${remote_dir}"
+    scp "$local_image" "${ssh_target}:${remote_path}"
+  fi
+fi
+
+# --- create -----------------------------------------------------------------
+echo
+if [[ "$type" == "lxc" ]]; then
+  echo "==> Creating LXC container ${vmid} (${name})..."
+  local_disk_size="${disk_size:-$PROXMOX_DEFAULT_LXC_DISK_GB}"
+  # --memory doesn't touch swap -- it silently stays at Proxmox's own
+  # 512M default otherwise (confirmed live: --memory 2048 left swap at
+  # 512). Default to matching whatever --memory resolved to above.
+  local_swap="${swap:-$memory}"
+  # --unprivileged: read back from modules/platforms/lxc.nix's own
+  # proxmoxLXC.privileged (via flake_target_lxc_privileged) rather than
+  # hardcoded, since that's no longer the same for every lxc-* target --
+  # lxc-docker sets it true so the container's NFS mounts work at all (the
+  # kernel's NFS client can't mount from inside any unprivileged
+  # container's user namespace, no matter what AppArmor allows -- see that
+  # option's own comment). The NixOS config inside the image bakes in
+  # cgroup/capability/mount expectations matching whichever value it was
+  # built with, so this must stay in sync with it -- `pct create`'s own
+  # CLI default for this flag is privileged (unlike the web UI, which
+  # defaults its checkbox the other way), so leaving it unset would create
+  # a privileged container running a NixOS config that assumes
+  # unprivileged for every target except lxc-docker, a real mismatch.
+  privileged_eval="$(flake_target_lxc_privileged "$repo_root" "$flake_target")"
+  unprivileged_flag=1
+  [[ "$privileged_eval" == "true" ]] && unprivileged_flag=0
+  #
+  # --features nesting=1,keyctl=1: required for a modern (v247+) systemd
+  # guest to actually boot unprivileged -- confirmed live: without this,
+  # AppArmor denies the nested user namespaces and credential mounts
+  # systemd routinely uses (even plain getty units), and every getty
+  # crash-loops on a denied mount every ~3s (visible as garbage on the
+  # console) while core services like nsncd fail the same way.
+  #
+  # ...,mount=nfs;nfs4: without it AppArmor blanket-denies the `nfs`/
+  # `rpc_pipefs` mount syscalls any NFS client share needs -- confirmed
+  # live on lxc-docker: `mount: /var/lib/nfs/rpc_pipefs: permission
+  # denied`. The value's `;` (Proxmox's own multi-fstype separator for
+  # this one feature, per PVE::LXC's use of PVE::ParseUtils::split_list)
+  # must stay single-quoted here: create_cmd is sent to `remote()`, which
+  # hands the whole string to `ssh` as a single command for the *remote*
+  # shell to parse -- unquoted, that `;` would be read as a remote
+  # command separator and silently truncate this into two commands.
+  create_cmd="${sudo_prefix} pct create ${vmid} ${iso_storage}:vztmpl/${remote_filename} --unprivileged ${unprivileged_flag} --features '${PROXMOX_DEFAULT_LXC_FEATURES}' --rootfs ${storage}:${local_disk_size} --hostname ${name} --cores ${cores} --memory ${memory} --swap ${local_swap} --net0 name=eth0,bridge=${bridge},ip=dhcp"
+  remote "$create_cmd"
+  remote "${sudo_prefix} pct start ${vmid}"
+else
+  echo "==> Creating VM ${vmid} (${name})..."
+  # pre-enrolled-keys=0 disables OVMF's Secure Boot key pre-enrollment --
+  # required, or systemd-boot (unsigned) can't be trusted by the firmware.
+  # --agent 1: wires up the virtio-serial channel QEMU exposes to the guest.
+  # modules/common/configuration.nix sets services.qemuGuest.enable = true
+  # on every host, so the guest-side qemu-ga daemon is already running --
+  # without this flag Proxmox never creates the channel it listens on, so
+  # `qm guest exec`/`qm agent` and the UI's IP-address display silently
+  # never work for any VM this script creates.
+  remote "${sudo_prefix} qm create ${vmid} --name ${name} --memory ${memory} --cores ${cores} \
+--net0 virtio,bridge=${bridge} --bios ovmf --machine q35 --scsihw virtio-scsi-pci \
+--efidisk0 ${storage}:1,efitype=4m,pre-enrolled-keys=0 --agent enabled=1"
+
+  if [[ "$dry_run" -eq 1 ]]; then
+    echo "[dry-run] ssh ${ssh_target} -- ${sudo_display}qm importdisk ${vmid} ${remote_path} ${storage}"
+    echo "[dry-run] (would parse the resulting disk identifier from that output)"
+    echo "[dry-run] ssh ${ssh_target} -- ${sudo_display}qm set ${vmid} --scsi0 ${storage}:<parsed-disk-id>"
+  else
+    importdisk_output="$(ssh "$ssh_target" "${sudo_prefix} qm importdisk ${vmid} ${remote_path} ${storage}")"
+    echo "$importdisk_output"
+    disk_id="$(echo "$importdisk_output" | grep -oP "(?<=Successfully imported disk as ')[^']+" | sed 's/^unused[0-9]*://')"
+    if [[ -z "$disk_id" ]]; then
+      echo "ERROR: couldn't parse the imported disk identifier from qm importdisk's output above." >&2
+      echo "The VM shell (${vmid}) and imported disk both exist -- finish attaching it by hand:" >&2
+      echo "  ssh ${ssh_target} -- ${sudo_display}qm set ${vmid} --scsi0 ${storage}:<disk-id-from-output-above>" >&2
+      echo "  ssh ${ssh_target} -- ${sudo_display}qm set ${vmid} --boot order=scsi0" >&2
+      exit 1
+    fi
+    remote "${sudo_prefix} qm set ${vmid} --scsi0 ${disk_id}"
+  fi
+  remote "${sudo_prefix} qm set ${vmid} --boot order=scsi0"
+  remote "${sudo_prefix} qm start ${vmid}"
+fi
+
+echo
+if [[ "$dry_run" -eq 1 ]]; then
+  echo "[dry-run] Nothing was built, uploaded, or created."
+else
+  echo "Done. ${name} (VMID ${vmid}) should be booting on ${node}."
+fi

scripts/recover-hosts.sh

@@ -0,0 +1,250 @@
+#!/usr/bin/env bash
+# recover-hosts.sh — Fix sops/SSH-key/GitHub-token issues on deployed NixOS hosts
+# and trigger a Switch-nix rebuild on each.
+#
+# Run from the repo root on the workstation (nixos@nixos):
+#   bash scripts/recover-hosts.sh [<hostname> ...]
+#
+# With no args it discovers and checks every known hostname.
+# With args it checks only those hostnames:
+#   bash scripts/recover-hosts.sh tor-relay
+#
+# Fixes applied automatically (then prompts before rebuilding):
+#   1. SSH host key drift — live key no longer matches host-keys/<target>_ssh_host_ed25519_key
+#      Fix: scp the registered key back and restore it (needs sudo once per host).
+#   2. Stale/invalid GitHub access token — the rendered nix-github-token.conf has
+#      a token GitHub rejects (401), blocking any rebuild that fetches disko or
+#      other public GitHub flake inputs.
+#      Fix: empty the rendered file so nix makes unauthenticated requests instead.
+#      Public repos (disko, nixpkgs, etc.) work fine without auth. sops-nix
+#      re-renders the correct new token automatically after the first successful
+#      rebuild.
+#
+# Both fixes need one interactive sudo session per host. The script opens a
+# single ssh -t per broken host so you enter the password once and all steps
+# run in sequence.
+
+set -euo pipefail
+cd "$(dirname "$0")/.."
+source scripts/env.sh 2>/dev/null || true
+
+SSH_OPTS=(-o StrictHostKeyChecking=no -o BatchMode=yes -o ConnectTimeout=5)
+SSH_USER=nixos
+
+# Known flake-target → ssh hostname map for all currently-defined hosts.
+# Add new hosts here as they are deployed.
+declare -A TARGET_HOST=(
+  [lxc-docker]=docker
+  [lxc-nix-cache]=nix-cache
+  [lxc-pxe-boot]=pxe-boot
+  [lxc-tor-relay]=tor-relay
+  [lxc-minimal]=nix-minimal
+  [proxmox-server]=server
+  [baremetal-gui]=nixos
+)
+
+# ── helpers ───────────────────────────────────────────────────────────────────
+
+info() { echo "  [✓] $*"; }
+warn() { echo "  [!] $*"; }
+step() { echo "==> $*"; }
+
+ssh_host_age() {
+  ssh-keyscan -t ed25519 "$1" 2>/dev/null \
+    | nix shell nixpkgs#ssh-to-age --command ssh-to-age 2>/dev/null \
+    | head -1 || true
+}
+
+registered_age() {
+  local keyfile="host-keys/${1}_ssh_host_ed25519_key.pub"
+  [ -f "$keyfile" ] || return 0
+  nix shell nixpkgs#ssh-to-age --command ssh-to-age < "$keyfile" 2>/dev/null \
+    | head -1 || true
+}
+
+github_token_valid() {
+  local host=$1
+  local raw token code
+  raw=$(ssh "${SSH_OPTS[@]}" "$SSH_USER@$host" \
+    "cat /run/secrets/rendered/nix-github-token.conf 2>/dev/null || true")
+  token=$(echo "$raw" | grep -oP '(?<=github\.com=)\S+' || true)
+  if [ -z "$token" ]; then
+    return 0  # no token = unauthenticated, works for public repos
+  fi
+  code=$(curl -s -o /dev/null -w "%{http_code}" \
+    -H "Authorization: token $token" \
+    "https://api.github.com/repos/nix-community/disko" 2>/dev/null || echo 000)
+  [ "$code" = "200" ]
+}
+
+# ── discover hosts ────────────────────────────────────────────────────────────
+
+if [ $# -gt 0 ]; then
+  HOSTNAMES=("$@")
+else
+  HOSTNAMES=()
+  seen=()
+  for target in "${!TARGET_HOST[@]}"; do
+    h="${TARGET_HOST[$target]}"
+    # deduplicate (e.g. proxmox-server and lxc-server both map to "server")
+    if [[ ! " ${seen[*]:-} " =~ " $h " ]]; then
+      seen+=("$h")
+      if ssh "${SSH_OPTS[@]}" "$SSH_USER@$h" "true" 2>/dev/null; then
+        HOSTNAMES+=("$h")
+      fi
+    fi
+  done
+fi
+
+if [ ${#HOSTNAMES[@]} -eq 0 ]; then
+  echo "No reachable hosts found. Pass hostnames explicitly or check SSH."
+  exit 1
+fi
+
+echo ""
+echo "Hosts to check: ${HOSTNAMES[*]}"
+echo ""
+
+# ── check phase ───────────────────────────────────────────────────────────────
+
+NEEDS_FIX=()
+
+for host in "${HOSTNAMES[@]}"; do
+  step "$host"
+
+  if ! ssh "${SSH_OPTS[@]}" "$SSH_USER@$host" "true" 2>/dev/null; then
+    warn "SSH unreachable — clearing stale known_hosts entry"
+    ssh-keygen -R "$host" 2>/dev/null || true
+    continue
+  fi
+
+  flake_target=$(ssh "${SSH_OPTS[@]}" "$SSH_USER@$host" \
+    "cat /etc/flake-target 2>/dev/null || true")
+  echo "  flake-target: ${flake_target:-unknown}"
+
+  host_broken=false
+
+  # SSH host key
+  if [ -n "$flake_target" ] && [ -f "host-keys/${flake_target}_ssh_host_ed25519_key.pub" ]; then
+    live=$(ssh_host_age "$host")
+    want=$(registered_age "$flake_target")
+    if [ "$live" = "$want" ]; then
+      info "SSH host key OK"
+    else
+      warn "SSH host key MISMATCH (live ≠ host-keys/)"
+      echo "       live:       $live"
+      echo "       registered: $want"
+      host_broken=true
+    fi
+  else
+    echo "  [~] No host-keys/ entry for ${flake_target:-unknown} — skipping key check"
+  fi
+
+  # GitHub token
+  if github_token_valid "$host"; then
+    info "GitHub token OK"
+  else
+    warn "GitHub token invalid (rebuild will fail with 401)"
+    host_broken=true
+  fi
+
+  # sops-nix result
+  sops_result=$(ssh "${SSH_OPTS[@]}" "$SSH_USER@$host" \
+    "systemctl show sops-nix --property=Result --value 2>/dev/null || echo unknown")
+  if [ "$sops_result" = "success" ]; then
+    info "sops-nix: success"
+  else
+    warn "sops-nix: $sops_result"
+  fi
+
+  $host_broken && NEEDS_FIX+=("$host")
+  echo ""
+done
+
+# ── fix phase ─────────────────────────────────────────────────────────────────
+
+if [ ${#NEEDS_FIX[@]} -eq 0 ]; then
+  echo "All hosts healthy — nothing to fix."
+  exit 0
+fi
+
+echo "Hosts needing fixes: ${NEEDS_FIX[*]}"
+echo ""
+echo "Each fix requires one sudo session per host. You will be prompted for"
+echo "the nixos sudo password once per host; all steps run in that session."
+echo ""
+read -r -p "Proceed with fixes + Switch-nix on each broken host? [y/N] " confirm
+[[ "$confirm" =~ ^[Yy]$ ]] || { echo "Aborted."; exit 0; }
+echo ""
+
+for host in "${NEEDS_FIX[@]}"; do
+  step "Fixing $host"
+  flake_target=$(ssh "${SSH_OPTS[@]}" "$SSH_USER@$host" \
+    "cat /etc/flake-target 2>/dev/null || true")
+
+  fix_script=""
+
+  # Fix 1: restore SSH host key
+  live=$(ssh_host_age "$host")
+  want=$(registered_age "${flake_target:-}")
+  if [ -n "$want" ] && [ "$live" != "$want" ]; then
+    echo "  Uploading registered SSH host key (private + public)..."
+    scp -o StrictHostKeyChecking=no \
+      "host-keys/${flake_target}_ssh_host_ed25519_key" \
+      "$SSH_USER@$host:/tmp/recover_ed25519_key"
+    scp -o StrictHostKeyChecking=no \
+      "host-keys/${flake_target}_ssh_host_ed25519_key.pub" \
+      "$SSH_USER@$host:/tmp/recover_ed25519_key.pub"
+    fix_script+='
+echo "[fix] Restoring SSH host key..."
+install -m 0600 /tmp/recover_ed25519_key /etc/ssh/ssh_host_ed25519_key
+install -m 0644 /tmp/recover_ed25519_key.pub /etc/ssh/ssh_host_ed25519_key.pub
+rm -f /tmp/recover_ed25519_key /tmp/recover_ed25519_key.pub
+echo "      Done."
+'
+    ssh-keygen -R "$host" 2>/dev/null || true
+  fi
+
+  # Fix 2: clear invalid GitHub token
+  if ! github_token_valid "$host"; then
+    fix_script+='
+echo "[fix] Clearing stale GitHub token (nix will use unauthenticated access)..."
+echo "" > /run/secrets/rendered/nix-github-token.conf
+systemctl restart nix-daemon 2>/dev/null || true
+echo "      Done."
+'
+  fi
+
+  # Fix 3: rebuild
+  fix_script+='
+echo "[fix] Running nixos-rebuild switch..."
+nixos-rebuild switch \
+  --no-write-lock-file \
+  --refresh \
+  --flake "git+https://gitea.lan.ddnsgeek.com/beatzaplenty/nixos.git#$(cat /etc/flake-target)"
+echo "[fix] Rebuild complete."
+'
+
+  echo "  Opening SSH session (enter sudo password when prompted)..."
+  if ssh -t -o StrictHostKeyChecking=no "$SSH_USER@$host" \
+    "sudo bash -s" <<< "$fix_script"; then
+    echo ""
+    info "$host fixed and rebuilt"
+  else
+    rc=$?
+    echo ""
+    warn "$host: rebuild exited with code $rc (may still have succeeded — check sops-nix below)"
+  fi
+
+  # Verify: re-check sops-nix result post-rebuild
+  sops_result_after=$(ssh "${SSH_OPTS[@]}" "$SSH_USER@$host" \
+    "systemctl show sops-nix --property=Result --value 2>/dev/null || echo unknown" 2>/dev/null || echo "ssh-failed")
+  if [ "$sops_result_after" = "success" ]; then
+    info "$host sops-nix: success post-rebuild"
+  else
+    warn "$host sops-nix: $sops_result_after post-rebuild (may need another pass)"
+  fi
+  echo ""
+done
+
+echo "Recovery complete."

scripts/secrets/backup-admin-key.sh

@@ -0,0 +1,150 @@
+#!/usr/bin/env bash
+# Backs up the local sops age key (the private key that decrypts
+# secrets/*.yaml -- normally the one trusted as &admin) to an arbitrary
+# destination path, e.g. a USB drive or other offline storage, so it can
+# later be restored and handed to rotate-admin-key.sh if this machine's
+# copy is ever lost, or to run either script from a different machine.
+#
+# Usage:
+#   scripts/secrets/backup-admin-key.sh <dest-path> [--key-file <path>] [--force] [--dry-run]
+#
+# Source key resolution matches sops/age's own default order:
+#   $SOPS_AGE_KEY (inline identity text) if set, else
+#   --key-file if given, else
+#   $SOPS_AGE_KEY_FILE if set, else
+#   ${XDG_CONFIG_HOME:-$HOME/.config}/sops/age/keys.txt
+set -euo pipefail
+
+repo_root="$(cd "$(dirname "$0")/../.." && pwd)"
+sops_yaml="${repo_root}/.sops.yaml"
+
+# shellcheck source=../env.sh
+source "${repo_root}/scripts/env.sh"
+# shellcheck source=../lib/sops-age.sh
+source "${repo_root}/scripts/lib/sops-age.sh"
+
+# Pin cwd for the same reason rotate-admin-key.sh does: age/sops calls
+# below should never depend on wherever the caller's shell happened to be.
+cd "$repo_root"
+
+usage() {
+  cat <<EOF
+Usage: $0 <dest-path> [--key-file <path>] [--force] [--dry-run]
+
+  <dest-path>        Where to write the backup. Parent directories are
+                     created as needed. Written with 0600 permissions.
+  --key-file <path>  Read the key from here instead of the default
+                     sops/age resolution (\$SOPS_AGE_KEY_FILE, then
+                     \${XDG_CONFIG_HOME:-\$HOME/.config}/sops/age/keys.txt).
+                     Ignored if \$SOPS_AGE_KEY is set (that always wins,
+                     same precedence sops/age itself uses).
+  --force            Overwrite <dest-path> if it already exists.
+  --dry-run          Print what would happen; write nothing.
+EOF
+}
+
+dry_run=0
+force=0
+key_file="$DEFAULT_SOPS_AGE_KEY_FILE"
+args=()
+
+while [[ $# -gt 0 ]]; do
+  case "$1" in
+    --dry-run)
+      dry_run=1
+      shift
+      ;;
+    --force)
+      force=1
+      shift
+      ;;
+    --key-file)
+      key_file="${2:?--key-file requires a path}"
+      shift 2
+      ;;
+    -h | --help)
+      usage
+      exit 0
+      ;;
+    --*)
+      echo "Unknown option: $1" >&2
+      usage >&2
+      exit 1
+      ;;
+    *)
+      args+=("$1")
+      shift
+      ;;
+  esac
+done
+
+if [[ "${#args[@]}" -ne 1 ]]; then
+  usage >&2
+  exit 1
+fi
+dest="${args[0]}"
+
+nix_extra_opts
+
+if [[ -n "${SOPS_AGE_KEY:-}" ]]; then
+  echo "==> Source: \$SOPS_AGE_KEY (inline identity from the environment)."
+  src_content="$SOPS_AGE_KEY"
+else
+  [[ -s "$key_file" ]] || {
+    echo "ERROR: no key found. \$SOPS_AGE_KEY is unset and ${key_file} doesn't exist or is empty." >&2
+    exit 1
+  }
+  echo "==> Source: ${key_file}"
+  src_content="$(cat "$key_file")"
+fi
+
+# Round-trip through a private scratch file (rather than trusting the
+# source string as-is) so age-keygen -y validates it's a real identity
+# before anything is written to <dest-path>.
+scratch="$(mktemp)"
+trap 'rm -f "$scratch"' EXIT
+( umask 077; printf '%s\n' "$src_content" > "$scratch" )
+
+src_pub="$(age_pubkey_from_identity_file "$scratch")" || {
+  echo "ERROR: source doesn't look like a valid age identity (age-keygen -y failed)." >&2
+  exit 1
+}
+echo "    public key: ${src_pub}"
+
+current_admin_pub="$(sops_yaml_admin_pubkey "$sops_yaml")"
+if [[ -n "$current_admin_pub" && "$current_admin_pub" != "$src_pub" ]]; then
+  echo "NOTE: this key does not match .sops.yaml's current &admin entry (${current_admin_pub})."
+  echo "      Backing it up anyway -- this script doesn't require it to be the admin key."
+fi
+
+if [[ -e "$dest" && "$force" -ne 1 ]]; then
+  echo "ERROR: ${dest} already exists. Pass --force to overwrite." >&2
+  exit 1
+fi
+
+if [[ "$dry_run" -eq 1 ]]; then
+  echo
+  echo "[dry-run] would write $(wc -c <"$scratch" | tr -d ' ') bytes to ${dest} (mode 0600)"
+  [[ -e "$dest" ]] && echo "[dry-run] would overwrite existing file (--force given)"
+  echo "[dry-run] Nothing was written. Re-run without --dry-run to apply this."
+  exit 0
+fi
+
+mkdir -p "$(dirname "$dest")"
+install -m 600 "$scratch" "$dest"
+
+dest_pub="$(age_pubkey_from_identity_file "$dest")"
+if [[ "$dest_pub" != "$src_pub" ]]; then
+  echo "ERROR: ${dest} was written but its public key doesn't match the source -- investigate before relying on this backup." >&2
+  exit 1
+fi
+
+cat <<EOF
+
+Done. Backed up to: ${dest}
+  public key: ${dest_pub}
+
+This is a private key -- store it somewhere offline/secure, not in this
+repo or anywhere it'd get committed. Restore it with:
+  scripts/secrets/rotate-admin-key.sh ${dest}
+EOF

scripts/secrets/prepare-host-key.sh

@@ -2,7 +2,7 @@
 # Generates a new machine's SSH host key by an arbitrary name, before it
 # necessarily has a flake target yet -- prints the .sops.yaml snippet to
 # add by hand. For any host that already has a flake target,
-# scripts/sync-host-keys.sh <target> does this same job plus the
+# scripts/secrets/sync-host-keys.sh <target> does this same job plus the
 # .sops.yaml/key_groups registration and re-encryption automatically; use
 # this script only to pre-generate a key ahead of adding the flake target
 # itself.
@@ -22,9 +22,13 @@
 # new machine.
 set -euo pipefail
 
-repo_root="$(cd "$(dirname "$0")/.." && pwd)"
+repo_root="$(cd "$(dirname "$0")/../.." && pwd)"
+# shellcheck source=../env.sh
+source "${repo_root}/scripts/env.sh"
+# shellcheck source=../lib/ssh-host-keys.sh
+source "${repo_root}/scripts/lib/ssh-host-keys.sh"
 
-hostname="${1:?usage: scripts/prepare-host-key.sh <hostname>}"
+hostname="${1:?usage: scripts/secrets/prepare-host-key.sh <hostname>}"
 sops_yaml="${repo_root}/.sops.yaml"
 
 if [[ ! -f "$sops_yaml" ]]; then
@@ -41,9 +45,10 @@ if [[ -f "$keyfile" ]]; then
   exit 1
 fi
 
-nix-shell -p openssh --run "ssh-keygen -t ed25519 -N '' -C '${hostname}' -f '${keyfile}'" >/dev/null
+nix_extra_opts
+generate_host_ed25519_key "$hostname" "$keyfile"
 
-age_pub="$(nix-shell -p ssh-to-age --run "ssh-to-age -i '${keyfile}.pub'")"
+age_pub="$(ssh_pubkey_to_age "${keyfile}.pub")"
 
 cat <<EOF
 

scripts/secrets/rotate-admin-key.sh

@@ -0,0 +1,193 @@
+#!/usr/bin/env bash
+# Rotates the &admin sops age key: decrypts with a backed-up copy of the
+# key CURRENTLY trusted as &admin, replaces .sops.yaml's &admin entry with
+# a new key already present in this environment, and re-encrypts every
+# secrets/*.yaml for the new recipient set. After this runs, the old key
+# can no longer decrypt anything -- this is a real, one-way handoff of
+# trust, not a preview.
+#
+# This is the automation for the manual steps create-proxmox-resource.sh /
+# sync-host-keys.sh print when they bootstrap a brand-new, not-yet-trusted
+# age key on a machine that's never had admin access before:
+#
+#   scripts/secrets/rotate-admin-key.sh /path/to/backed-up/admin/keys.txt
+#
+# The backup key's *public* key must match .sops.yaml's current &admin
+# entry -- this script verifies that by deriving it, it doesn't just trust
+# the filename or take it on faith. The new key defaults to wherever sops
+# itself would already look ($SOPS_AGE_KEY_FILE, then the XDG default), so
+# the common case is just pointing this at the restored backup.
+set -euo pipefail
+
+repo_root="$(cd "$(dirname "$0")/../.." && pwd)"
+sops_yaml="${repo_root}/.sops.yaml"
+
+# shellcheck source=../env.sh
+source "${repo_root}/scripts/env.sh"
+# shellcheck source=../lib/sops-age.sh
+source "${repo_root}/scripts/lib/sops-age.sh"
+
+# sops resolves .sops.yaml by walking up from the process's cwd, not from
+# the target file's own path -- if this script were invoked from somewhere
+# other than the repo root (or from inside another checkout/worktree that
+# happens to have its own .sops.yaml), `sops updatekeys` would silently
+# re-encrypt against the WRONG config's recipient list instead of this
+# repo's. Pin cwd here so every sops/age call below is unambiguous
+# regardless of where the caller's shell started out.
+cd "$repo_root"
+
+usage() {
+  cat <<EOF
+Usage: $0 <path-to-backed-up-admin-key> [--new-key-file <path>] [--dry-run]
+
+  <path-to-backed-up-admin-key>  age identity file for the key CURRENTLY
+                                 trusted as &admin. Only ever read -- never
+                                 copied or modified.
+  --new-key-file <path>          age identity file for the key to promote
+                                 to &admin. Defaults to \$SOPS_AGE_KEY_FILE,
+                                 then
+                                 \${XDG_CONFIG_HOME:-\$HOME/.config}/sops/age/keys.txt
+                                 (sops/age's own default resolution order).
+  --dry-run                      Print what would change; touches nothing
+                                  (.sops.yaml untouched, no sops updatekeys
+                                  calls).
+EOF
+}
+
+dry_run=0
+new_key_file="$DEFAULT_SOPS_AGE_KEY_FILE"
+args=()
+
+while [[ $# -gt 0 ]]; do
+  case "$1" in
+    --dry-run)
+      dry_run=1
+      shift
+      ;;
+    --new-key-file)
+      new_key_file="${2:?--new-key-file requires a path}"
+      shift 2
+      ;;
+    -h | --help)
+      usage
+      exit 0
+      ;;
+    --*)
+      echo "Unknown option: $1" >&2
+      usage >&2
+      exit 1
+      ;;
+    *)
+      args+=("$1")
+      shift
+      ;;
+  esac
+done
+
+if [[ "${#args[@]}" -ne 1 ]]; then
+  usage >&2
+  exit 1
+fi
+backup_key="${args[0]}"
+
+[[ -s "$backup_key" ]] || { echo "ERROR: backup key file not found or empty: ${backup_key}" >&2; exit 1; }
+[[ -s "$new_key_file" ]] || { echo "ERROR: new key file not found or empty: ${new_key_file}" >&2; exit 1; }
+
+nix_extra_opts
+
+echo "==> Deriving public keys..."
+old_pub="$(age_pubkey_from_identity_file "$backup_key")"
+new_pub="$(age_pubkey_from_identity_file "$new_key_file")"
+echo "    backup (old admin) key: ${old_pub}"
+echo "    new admin key:          ${new_pub}"
+
+if [[ "$old_pub" == "$new_pub" ]]; then
+  echo "ERROR: backup key and new key are identical -- nothing to rotate." >&2
+  exit 1
+fi
+
+current_admin_pub="$(sops_yaml_admin_pubkey "$sops_yaml")"
+if [[ -z "$current_admin_pub" ]]; then
+  echo "ERROR: couldn't find a '&admin age1...' line in ${sops_yaml}." >&2
+  exit 1
+fi
+
+if [[ "$current_admin_pub" != "$old_pub" ]]; then
+  echo "ERROR: ${backup_key} doesn't match the current &admin key in .sops.yaml." >&2
+  echo "  .sops.yaml &admin: ${current_admin_pub}" >&2
+  echo "  backup key pubkey: ${old_pub}" >&2
+  echo "Wrong backup file, or .sops.yaml has already moved on -- not touching anything." >&2
+  exit 1
+fi
+
+mapfile -t secrets_files < <(find "${repo_root}/secrets" -maxdepth 1 -name '*.yaml' | sort)
+if [[ "${#secrets_files[@]}" -eq 0 ]]; then
+  echo "ERROR: no secrets/*.yaml files found under ${repo_root}/secrets." >&2
+  exit 1
+fi
+
+# sops_can_decrypt <key-file> <secrets-file>: used both to confirm the
+# backup key still works before touching anything, and again after
+# rotation to confirm the new key does too.
+sops_can_decrypt() {
+  local key_file="$1" secrets_file="$2"
+  SOPS_AGE_KEY_FILE="$key_file" nix-shell "${NIX_OPTS[@]}" -p sops --run \
+    "sops -d '${secrets_file}'" >/dev/null
+}
+
+echo "==> Confirming the backup key can actually decrypt..."
+if ! sops_can_decrypt "$backup_key" "${secrets_files[0]}"; then
+  echo "ERROR: backup key failed to decrypt $(basename "${secrets_files[0]}") -- aborting." >&2
+  exit 1
+fi
+echo "    OK: decrypted $(basename "${secrets_files[0]}")"
+
+if [[ "$dry_run" -eq 1 ]]; then
+  echo
+  echo "[dry-run] would replace .sops.yaml's &admin line:"
+  echo "[dry-run]   - ${current_admin_pub}"
+  echo "[dry-run]   + ${new_pub}"
+  echo "[dry-run] would then re-encrypt (sops updatekeys --yes) for the new recipient set:"
+  for f in "${secrets_files[@]}"; do
+    echo "[dry-run]   secrets/$(basename "$f")"
+  done
+  echo
+  echo "[dry-run] Nothing was changed. Re-run without --dry-run to apply this."
+  exit 0
+fi
+
+echo "==> Rotating .sops.yaml's &admin key..."
+sed -i "s|^  - &admin age1[a-z0-9]*|  - \&admin ${new_pub}|" "$sops_yaml"
+grep -qF "$new_pub" "$sops_yaml" || {
+  echo "ERROR: sed edit didn't take -- .sops.yaml left unchanged, check it by hand." >&2
+  exit 1
+}
+echo "    Updated."
+
+echo "==> Re-encrypting secrets/*.yaml for the new recipient set..."
+for f in "${secrets_files[@]}"; do
+  echo "==> $(basename "$f")"
+  sops_updatekeys "$f" "$backup_key"
+done
+
+echo "==> Verifying the new key can decrypt everything..."
+for f in "${secrets_files[@]}"; do
+  if ! sops_can_decrypt "$new_key_file" "$f"; then
+    echo "ERROR: new key failed to decrypt $(basename "$f") after rotation -- investigate before committing." >&2
+    exit 1
+  fi
+  echo "    OK: $(basename "$f")"
+done
+
+cat <<EOF
+
+Done. .sops.yaml's &admin key is now:
+  ${new_pub}
+
+The old key (${old_pub}) can no longer decrypt any secrets/*.yaml
+re-encrypted above.
+
+Review the diff, then commit:
+  git add .sops.yaml secrets/*.yaml
+  git commit -m "Rotate sops admin age key"
+EOF

scripts/secrets/sync-host-keys.sh

@@ -24,13 +24,21 @@
 # ever touches keys it itself manages.
 set -euo pipefail
 
-repo_root="$(cd "$(dirname "$0")/.." && pwd)"
+repo_root="$(cd "$(dirname "$0")/../.." && pwd)"
 sops_yaml="${repo_root}/.sops.yaml"
 keydir="${repo_root}/host-keys"
 editor="${repo_root}/scripts/lib/sync-host-keys-edit-sops.py"
 
-# shellcheck source=env.sh
+# shellcheck source=../env.sh
 source "${repo_root}/scripts/env.sh"
+# shellcheck source=../lib/nix-eval.sh
+source "${repo_root}/scripts/lib/nix-eval.sh"
+# shellcheck source=../lib/ssh-host-keys.sh
+source "${repo_root}/scripts/lib/ssh-host-keys.sh"
+# shellcheck source=../lib/sops-age.sh
+source "${repo_root}/scripts/lib/sops-age.sh"
+# shellcheck source=../lib/confirm.sh
+source "${repo_root}/scripts/lib/confirm.sh"
 
 mkdir -p "$keydir"
 
@@ -74,7 +82,7 @@ ensure_admin_decrypt_key() {
     return
   fi
 
-  local key_file="${SOPS_AGE_KEY_FILE:-${XDG_CONFIG_HOME:-$HOME/.config}/sops/age/keys.txt}"
+  local key_file="$DEFAULT_SOPS_AGE_KEY_FILE"
 
   if [[ -s "$key_file" ]]; then
     echo "Found existing sops age key at ${key_file}."
@@ -93,7 +101,7 @@ ensure_admin_decrypt_key() {
   mkdir -p "$(dirname "$key_file")"
   nix-shell "${NIX_OPTS[@]}" -p age --run "age-keygen -o '${key_file}'" 2>&1 | grep -v "^Public key:" || true
   local new_pub
-  new_pub="$(nix-shell "${NIX_OPTS[@]}" -p age --run "age-keygen -y '${key_file}'")"
+  new_pub="$(age_pubkey_from_identity_file "$key_file")"
 
   cat <<EOF
 
@@ -118,12 +126,10 @@ EOF
 }
 
 discover_targets() {
-  nix eval --json --no-use-registries --no-accept-flake-config \
-    "${repo_root}#nixosConfigurations" --apply builtins.attrNames \
-  | jq -r '.[] | select(. != "installer")'
   # installer is the one nixosConfigurations target that doesn't import
   # sops-nix at all (see CLAUDE.md's "Security Notes" -- hardcoded login
   # password instead) -- config.sops.secrets doesn't exist for it.
+  list_flake_targets "$repo_root" | grep -v '^installer$'
 }
 
 locally_managed_hosts() {
@@ -159,7 +165,7 @@ queue_host_sync() {
       echo "[dry-run] ${host}: would generate host key"
     else
       echo "==> ${host}: generating host key"
-      nix-shell "${NIX_OPTS[@]}" -p openssh --run "ssh-keygen -t ed25519 -N '' -C '${host}' -f '${keyfile}'" >/dev/null
+      generate_host_ed25519_key "$host" "$keyfile"
     fi
   else
     echo "==> ${host}: host key already present"
@@ -170,7 +176,7 @@ queue_host_sync() {
     if [[ "$dry_run" -eq 1 ]]; then
       age_pub="dry-run-placeholder-not-a-real-key"
     else
-      age_pub="$(nix-shell "${NIX_OPTS[@]}" -p ssh-to-age --run "ssh-to-age -i '${keyfile}.pub'")"
+      age_pub="$(ssh_pubkey_to_age "${keyfile}.pub")"
     fi
     add_keys_json="$(jq --arg host "$host" --arg key "$age_pub" \
       '. + [{host: $host, age_key: $key}]' <<<"$add_keys_json")"
@@ -237,7 +243,7 @@ apply_edit_plan() {
       while IFS= read -r basename; do
         [[ -z "$basename" ]] && continue
         echo "==> secrets/${basename}"
-        nix-shell "${NIX_OPTS[@]}" -p sops --run "sops updatekeys --yes '${repo_root}/secrets/${basename}'"
+        sops_updatekeys "${repo_root}/secrets/${basename}"
       done <<<"$changed"
     fi
   fi
@@ -357,8 +363,7 @@ cmd_regenerate_all() {
   echo "image/tarball before it can decrypt secrets again."
 
   if [[ "$dry_run" -ne 1 ]]; then
-    read -rp "Type REGENERATE to confirm: " confirm
-    if [[ "$confirm" != "REGENERATE" ]]; then
+    if ! confirm_typed "REGENERATE" "Type REGENERATE to confirm: "; then
       echo "Cancelled."
       return
     fi

scripts/secrets/sync-nix-cache-host-key.sh

@@ -0,0 +1,110 @@
+#!/usr/bin/env bash
+# Detects and fixes drift between the ed25519 SSH host key nix-cache is
+# actually serving right now and vars.nixCacheHostKey (variables.nix) --
+# the value modules/nix-cache/remote-builder-client.nix bakes into every
+# client's declarative programs.ssh.knownHosts, and
+# scripts/proxmox/configure-nix-cache-client.sh hardcodes as its own
+# default for non-NixOS clients.
+#
+# This value has no automatic source of truth: nix-cache's host key is
+# generated once (first boot / container recreate) and never touches this
+# repo again unless someone remembers to update it by hand afterwards. It
+# drifted silently once already -- confirmed live: variables.nix recorded
+# a key that no longer matched what nix-cache actually presented, which
+# would fail every real client's SSH host-key verification for
+# distributed builds without ever producing an obvious error pointing
+# back here (a client just sees "Host key verification failed" against
+# *some* key, with no hint that the trusted value itself was stale).
+#
+# codex-maintenance.sh runs this in --check mode on every invocation so
+# that drift surfaces as a warning instead of a future debugging session.
+#
+# Usage:
+#   scripts/secrets/sync-nix-cache-host-key.sh [--check] [--dry-run] [--host <name>]
+#
+#   --check     Only report drift (exit 1 if found, 2 if nix-cache is
+#               unreachable); never writes. For CI/maintenance use.
+#   --dry-run   Show what would change; never writes.
+#   --host      Override the hostname to scan (default: variables.nix's
+#               nixCacheHost / env.sh's NIX_CACHE_HOST).
+set -euo pipefail
+
+repo_root="$(cd "$(dirname "$0")/../.." && pwd)"
+variables_nix="${repo_root}/variables.nix"
+client_script="${repo_root}/scripts/proxmox/configure-nix-cache-client.sh"
+
+# shellcheck source=../env.sh
+source "${repo_root}/scripts/env.sh"
+
+check_only=0
+dry_run=0
+host="${NIX_CACHE_HOST}"
+
+while [[ $# -gt 0 ]]; do
+  case "$1" in
+    --check) check_only=1; shift ;;
+    --dry-run) dry_run=1; shift ;;
+    --host)
+      host="${2:?--host requires a hostname}"
+      shift 2
+      ;;
+    -h|--help)
+      sed -n '2,23p' "$0"
+      exit 0
+      ;;
+    *)
+      echo "ERROR: unknown argument: $1" >&2
+      exit 1
+      ;;
+  esac
+done
+
+current_value="$(grep -oE 'nixCacheHostKey = "[^"]+"' "$variables_nix" | sed -E 's/nixCacheHostKey = "(.*)"/\1/')"
+if [[ -z "$current_value" ]]; then
+  echo "ERROR: couldn't find nixCacheHostKey in $variables_nix" >&2
+  exit 1
+fi
+current_type_blob="$(awk '{print $1, $2}' <<<"$current_value")"
+current_label="$(awk '{print $3}' <<<"$current_value")"
+
+echo "Scanning ${host} for its current ed25519 SSH host key..."
+nix_extra_opts
+scanned="$(nix-shell "${NIX_OPTS[@]}" -p openssh --run "ssh-keyscan -t ed25519 -T 5 '${host}'" 2>/dev/null | grep -v '^#' | head -1 || true)"
+if [[ -z "$scanned" ]]; then
+  echo "ERROR: couldn't reach ${host} (or got no ed25519 host key back) via ssh-keyscan." >&2
+  exit 2
+fi
+scanned_type_blob="$(awk '{print $2, $3}' <<<"$scanned")"
+
+if [[ "$current_type_blob" == "$scanned_type_blob" ]]; then
+  echo "Up to date: ${host}'s host key matches variables.nix's nixCacheHostKey."
+  exit 0
+fi
+
+echo "DRIFT DETECTED:"
+echo "  variables.nix has: $current_type_blob"
+echo "  ${host} is now:    $scanned_type_blob"
+
+if [[ "$check_only" -eq 1 ]]; then
+  echo
+  echo "Run 'scripts/secrets/sync-nix-cache-host-key.sh' (no flags) to fix." >&2
+  exit 1
+fi
+
+new_value="${scanned_type_blob} ${current_label}"
+
+if [[ "$dry_run" -eq 1 ]]; then
+  echo "(--dry-run: would update variables.nix and ${client_script##*/} to:)"
+  echo "  $new_value"
+  exit 0
+fi
+
+sed -i "s|nixCacheHostKey = \"[^\"]*\"|nixCacheHostKey = \"${new_value}\"|" "$variables_nix"
+sed -i "s|NIX_CACHE_HOST_KEY:=[^}]*}|NIX_CACHE_HOST_KEY:=${new_value}}|" "$client_script"
+
+echo "Updated variables.nix and ${client_script##*/} to:"
+echo "  $new_value"
+echo
+echo "This only takes effect on already-deployed NixOS clients after their"
+echo "next rebuild (programs.ssh.knownHosts is declarative). Review with"
+echo "'git diff', then run 'bash scripts/codex-maintenance.sh' before committing."

secrets/common.yaml

@@ -1,81 +1,261 @@
 root-hashedPassword: ENC[AES256_GCM,data:Kp0nOZI7vDoLhJHiOJBwJn0rQZ5yhnwapGnAcA+qh8vlDETtFs/iQdetF/2ZxmANf62SviTNd+Ag0q5JIF1996x7onZGXqxgSMCuVzZLBdUlsO5IR0BslWWz47khYGTe4WkUg4NB1itBfQ==,iv:5Sra5vJ79V8hxQT3g9qJ+dOj2W2sumIhqpitqnHjJdk=,tag:3Igu0+8GeUZHqS3fKUVwog==,type:str]
 nixos-hashedPassword: ENC[AES256_GCM,data:pT7tVRN6X4a+DNUgB7fIUUE3CbnetkjxmoSL1PxSU+ktsFU+fB0mEvJjA1uujsGH5Rcztg7YM815+M0Z67ILmHaXbza5DtFacrqhi4/b277xly0SHRX4yOvBwQh6mJG1jn/0O/wvUUIYdw==,iv:bp2nfhC8nFbk6o5iWDAugvbzu7J/a1xayFnBEtkhNpE=,tag:HqWgkIpSrSM/K9OK2WO+VQ==,type:str]
-nix-github-token: ENC[AES256_GCM,data:OfNRGJg16Ede6EilWUetCs9za+xk5/Lsa3SpVajsqz8PMdA1xQNeCWdX7ZAMdijHClpBhU6ETFGsXvt41O9aORS951uijeGSW7/NH35/bnPISrKdYeBx/+xEiqwH,iv:QGU3v7xOy89uzRTCb1U9ICyJ8XYIpXrUsDt12aL3g2Y=,tag:Bde2wcWNv8H4WLxSEUAodg==,type:str]
+nix-github-token: ENC[AES256_GCM,data:k1vYz7SqVhzpWa6jTL6NUD8lKOCpHCgTm+HT4IcnbzbSTUZP/bJUYw==,iv:UqAULZnr/4+VcioUDfTwvOSuwM8K9JgGhiApvYQPyoc=,tag:1LKHXhWAO/AHPDIZFBb04A==,type:str]
 sops:
     age:
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBpWjNSdEdZbUUzamswa08w
-            aCtzSHB0bFVZMnYxTkpuM1psdVYzWW55SzMwCkliMWVOUlBqRG5wOGZjQVg4MkFz
-            NEVkMXdkTjhWRlZmVGlzZElid2pUMXMKLS0tIGtHUmRCNXNhVmloUHYzQnE5YlBS
-            YnVSQjJlT3JnQ1RNMm9xV2xKOGRZUDAKc4VTl9NEI9Rv8+4J3JTeHTt2h8Dr2IJv
-            tfvoNJQM/w6RAJWNTkaDmzZa9OnUW+grDlBQKlDuAnr6fZmuNTH2hQ==
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBndmw0dXdSd3paLzdlYXBv
+            K25ZMy9sZ3Ftci8yckZzOFdITmFEaXpiamlzCnZFSDZqWnVKQzNZUXBITXZmOGF5
+            ZUFwdTVuNWptS0lyei9XTWJiQkppenMKLS0tIFZRa255YVBKcTBCV3ZBSUN4NWdv
+            UG5vV3FDaUNWM0Zwb1BrWnpDZXZCek0KhuUPg0MwDO9qGlCHhft3tmuvmjAVsWMu
+            eO3S1tANZ/YesQylxXQl+pDYC4J1X4BZmtf9tXGLTQoC0nxSTbqQEA==
             -----END AGE ENCRYPTED FILE-----
-          recipient: age10nd382a9klsn2mrs60emdtsxe43pht3a0m9p29phfrhy0wfyt3vsq9r667
+          recipient: age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBOR25UN1c0aE5SYWphbU0y
-            SHRTZ1B0WC9NU3Z5VHpzTXpLSUxHTDI1ZFE0CnFpYUN1eGZQejJMblZPd1ROeUth
-            dklZYVVNa1ZNZ1d4dW9vMCsvQWp1RkEKLS0tIERxakx5L0JrQitib1EyNDRMbDQ5
-            Z3hDWUFEazdxczVhaHJYK3VZeEJSSDgKkw9T4ZuT+VHIF4WopqRHt8vW30kOysJ3
-            vOq6EZ3Fqkgmoxm69Zp2gFnuE9GZIBy3VPQVLU2k6dZGJ3IvmLYeBA==
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA2U0VHSzh0SllHaFBoNzVU
+            UlJtcE1YdG9tYWN6eitqSzFMR1IzbGtISFZzCmo2VEkrWlFlRW9lbmFpSUM1WkJl
+            aHN1djk1eWMyaWdJUXZjQVo3QWNYUUUKLS0tIHVQaUI1Zzd6Ly9kYVoySjVYYVM2
+            L3FxMmVJOUFkdXVQa1A2U2svZjRtUjQKMQPIeUzyKIaqZqONldMNoqACcQgXFV2D
+            0B0Rn1bgDOKskMjUc5ffp4PztNGKr/Y3oVqzEChQc3V78WvzAGcjyQ==
             -----END AGE ENCRYPTED FILE-----
           recipient: age19gfn2yedg76dmztm4hncr7vf3r3c9j0qpt4rap7y7gersjk4m3ks2lhd0e
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA0THJzMFBTTCtDMWRmZ25M
-            dU55OVhBb0trWWRUNlArTnEzRjhiYngvRENNCjF4d0M5NlYyQW50TTdMRXpuUjRr
-            M1NwV05JOHV6T2cxT2FheVpuZ0w2T0kKLS0tIFBxdlVpVEoxOUpSWjk1ejRsK1NM
-            V1UwTU1scG91L2FIemtwSW5JbFlmeG8K/1WIlaIidy3x3ptoRpS/DG88064LQ6Mq
-            GbfB0jfq5PILDQMMuZu5oIBY31SxwnhZ02Ns7gA67kgNIRSCmk9WyQ==
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSArbGVOaXlmb0hhUFpiSnBE
+            OVJFdFpSeEpNLzhYNzFBVnExY0FPM1RzckVRCkVRQmgzTUFHRnl5MkljNFZVRFJY
+            OVZ6REkyNkprWGV6Y1QrSHVCUlJlYXcKLS0tIGltTk9HekdHSGpHZUVtU2g1MHpJ
+            TEkrYmlvNWMvcmtrMXh4YXZjU3lKREUKV/QdP8vXM8qjiwdLrZFpBe8EBm2j3LT9
+            KHEiXxViVtLmRRsJzBPFbbQZmiyrI8IPTAb6wO9y0QteolHUst4PnQ==
             -----END AGE ENCRYPTED FILE-----
           recipient: age1ll6hj5ggruetgjwjfnplpn5xtq35uhlcdflksx3xmnjm6s3uad9sz70jkf
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBmRURQVGw1a1E1MkIzV2pa
-            RG5HSkM0c0huUGVWcnFZOGlacGlGOHFMTVFrCm5OS09HRFc3TGVUYmtzTStxL0Q5
-            N2hRMEcxUE9MTmZXL0wvME5EZXF1Z00KLS0tIHdHMVVHcTZzMmdXU0s4QlVqSS9Y
-            ZUVmcWhPaURIUFJGR0V4bUZwKzM1bm8KlvGMNEClbLlfvJqNQHhd0dI4ihShLChF
-            GI/fydgrBruw3Otv6KLZu3CBC7iNcKlvZxz+YGD2qbicmyQ5hAhDSQ==
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBTV0lJR1NDZkVmNmNTekJo
+            TjkyakRUbkZTaWpRY05HT1E5eHlIMTJLblhJClp4c3Y0Q3g2VDRWRlFSSHpwc2NJ
+            eGJ1akRwb3dBUzMzdHNObDRMTTBXcm8KLS0tIEp6RnR0bVdzckNhWmlHMmhoY1FD
+            d2NkaDRROFdHbUQ1V0hQM1E3eE5hZEkKFHuCbyc6tFL7H0UxxP8poPTomNRqHsrP
+            b0Dfa26NrmK7tFNG1SHiW02wRZwrfFgHbfsOaJEJYnzaX9uGt0w4yQ==
             -----END AGE ENCRYPTED FILE-----
           recipient: age120le4a5l8dh3lyfgvmj3d9ksmej6ajs5mer5y7r0vfg3x9fn69dqf8xgzu
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA5bWpFenBlQldna3RhSFpr
-            bEJBaHJDMzM3OHlqTmozcWU0VDM1bTFUWFZzCnZtNHZjZ1U1RzNkUlBHZFozWXdt
-            VVkxQjMvTDJtbFZnclpkUEd4TEVmNTAKLS0tIFlhV2ZSSzJLRVNoMmFyVktDOElR
-            YUxqZUFoY1ZWeGlldGplMjVQa1A5aUUKWelY6yO7Mr6dRvj4MVMbq/Z9JgrAnahz
-            BDhHqObzJrOCtfDCTWiYuP+0yvIFWItMWhGSMw9MwwivvwnrEa+ZuQ==
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBGUytEOTlCVW1zdGZxVHF1
+            MmRlbVAxWXcwYWdQNU5JanFXTmVzcVBMY0c4CmhiYkZ6YklwOTE3c0pnU1ovblFv
+            NDYrUzRwcDA1cCtpNEUwTDlKQkRnNUEKLS0tIDJFTmM5Y1VOalVueEV1ajdqeE83
+            MW94VHdRSzlQWk1JbWFhcXcwQmtrdlEK1nx9rEHzQLkA5HTfqozP4503fdLfhpS1
+            hXF1jyOUMTEpcCnjoVe9ApTuXuXJgpt9ld7XpQq9IzDmN/VPprnkOQ==
             -----END AGE ENCRYPTED FILE-----
-          recipient: age1qz9d4ka4xgexujyd247s7lp737sulp5fhxl5d65fj2ykvc4j4edqrsdks8
+          recipient: age1jy444f9d9stygj4p3w9kh54cqcfr654tvr75tdvee5cxsgtdtc9q3v60ep
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBiK2hKb2VaVnoyaEVYUHZZ
-            OWVUSGtONGs5dEljTjJQdlhEcjNjdjViT2pVCkpaOHVZMlpXOFRveVlMeXZqWmoz
-            ZHJRQTR2dmJQSEozeTRGMEdUdFlmZ2MKLS0tIERWS1RVdW1jQytBZzlkb3puNjhH
-            ZjdlZmtzNXVOQ25DeCthUzhRRm1MT2cKaxc7zGm57iJFSeYc2IPqF4Eaxa44nR37
-            pWZw+erG4F9AAZ2F047q+oLKe0B8FLSF54IbcXdQhitgGNR7B2HVeA==
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBEdzJ0N0RVWVZrenRhaGJH
+            YnpmQnhjb3FhRGwvMWRUWVhQbUMvRS9oZ1UwCk9IU1FnLyt4bUFsSW5LUzRONFU5
+            SndHQ3dBT3lRWFVxWWVDMFFFT2xGK0UKLS0tIDR6ZHg4WGl2RTA2SDRncnBLdHd0
+            cFdWZE8zNkZGL2dGVkphUkxzNEMvd2cKsHB45C+Rj/glZAy0nCucuFeYpzDsJsRw
+            Tua2XQMBF1CJQ1/Hweyg/H+d3v0q2tiT7Sf4d3Hjjn1pMUZHW1ovaw==
             -----END AGE ENCRYPTED FILE-----
           recipient: age120whqj96g26lsgy4udvgsn8dc9lumh8jeu3a564fx79rjr5lxffqmrljuu
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA1ekhUTG5VOFErL3pFeWZM
-            RG9NVnN6NFl3bzlFeTQzdHFtZmhwem04alQ0ClpJRStObERMZ0w2V0NhR1FSeW96
-            M1d2V2NjUkUrLzN2ZVNSbGY4bll5WmsKLS0tIC94dVFQcXJ6d3pLU0VHNEFGR0ls
-            a1Q2UmNuSjVMNG5XZGZKV1VmNHFPQXcKQJrZGw/9fPnXeFZ4omrkEgrzwplhwvRW
-            i0FXuepoU353sR7enyL34qPoOdm05ivowuPKNzkq8D4i5AF6vGv+YA==
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBnSFI1cFVWdklWcCtUbkcw
+            S3dFK2k2OFR4K2Z3V3FVVHVlQUV1V2ZtYVcwClBnRDJkeTFRL2JzSFN1eGZmdno3
+            OWZwbFVLRWVEWVh2ektid1B5dk1hSWcKLS0tIG16SW1JbDdHMXVHcTBHOFU2S0J6
+            aDlUOFRjcC8rcmVSQXZ6WFVxUHdibG8Kc4/bnpWJ0FmmmRSACJ6zXG0FTg4cGb8D
+            OFLrJo0HVlSZnqs6jX6K6qr+K8KyGMTIJEPdUl6au7tSEFsJjvEylQ==
             -----END AGE ENCRYPTED FILE-----
-          recipient: age164px2a8e48ptsf9ngtan38aa6jls4jdl26mzrgzf6sn3vcvt49hqjrgr8w
+          recipient: age1xjst4frdh0th6q8m7p7u9g5af7ty5jqeum0p6z8a52a9q7st7ewqw8yl9j
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBoZ2lHM2RBQ3lUK216dkcr
-            Y3RrcXR3QTdFVjJRWlhpQWVFQ1cyZWNabkRFClAwRi9PSHF5ZWFSUzJuRXF3bU1R
-            b0U5TFRZaFdmR1NMS3RRT3E3M2hUdE0KLS0tIEtrUy8ydkNyVHBiOVR6WEdjV2VN
-            NVJHUVgwRkhxcmlwcFkrRlFwTEF6YVkKzXyJk0UnmUsvb+NzNVcf/gf7OEEt3P/K
-            OIGxDrGfs/zNQgeKXNbQlQ4p4jOaybG8aCmX+A4qTk6/I8yY8LTJWg==
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSB6UHNRMUd1akx0ampjSE5I
+            VFA5M2d1TytJZ01aV2x1eDdoNENMWUErL1ZvCmwxTFZhQUdIOGxSYzhYQ1R4K1g5
+            RVJFenhVeWRBa0Y3M0FYdkRnMXJYNk0KLS0tIFFhOUt0MEdIVHB0b2FGM3Z6NEhK
+            MGFremtoYVJHMzJtcnJTTm5CWk00ZWcK2KlNsdk6D+UC8C4koAjm6t5gIa+t/NnV
+            Wnl1/zRxw+fVbtDWfmeoMnmJStukh3Qg+Wm5n6iw8n3ywBYxvQRr+Q==
             -----END AGE ENCRYPTED FILE-----
           recipient: age10at8862478urh0eeuwh8hzln6ck78jgwtztgxatwqlzwagg77y5snm4xzg
-    lastmodified: "2026-07-19T02:30:40Z"
-    mac: ENC[AES256_GCM,data:UiL3VMDF6rq4Nr87KspcDx434q3tfNXeb5pwH2O+4ssNQ6xzcYDdzXBnhAY3zLBsqPMKrvHBd4Ot/gEMcq3FMIVe7Q6p9yWKpep66KZ/yWEhAlwIVhD79Oj8VS+1CHKjf25zpRdhZorp04oeFQQd9VfjJB4EE/Q1aVbwTGlpIic=,iv:i/0conaFgFia+wzNTdUL6tlSTw35HTK3Ap1Sr5RGHf8=,tag:ULbz5FllShA/JjlSRdxA0g==,type:str]
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBzMTJxYWhTcVBNYlN1R1Rw
+            UmY3ZWVmcjFEUmlEcm5zMHI2bEE2dTErM0V3Cm5PVTV0STc0dFgwa3ZHamxSY3N6
+            aStvVExTdGM2dTVjazYwNzVZRGdDdTgKLS0tIGpodmd1ZnczbWlibmdIYjBVcXNN
+            RWJtMVVnQ0pWNjFwblBUVm5wWUJvVFUKr13nSwN1+RrXYhDNDA1MnoVr6ynSKJB7
+            7yz9O9LwukKwKj7C6dIt7yZSiUAHotm2nJPYZYYmyLCfUodMFZAIVg==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1ezk9x53zt8kcnscdm80jcyf0xq97vndv7jsn3rl8cc0cwm2jmpmq372dzs
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA0N3N4N3Y2VDk2MWVRbW9t
+            eDQrVWMyb2NGRVVuay9Fam1HOW9keHE4MXdNCnIrNUFrQ2xMK2c4ZHYyNDVwblpo
+            ZTJMak91NEJwc2RuN1FUV3VLOWdGSG8KLS0tIGI3alVhcmVDeW5LN25yL0dzYldj
+            MSs3WEgySmRKQnBqNEN1eHVJY3FucmMKFstvTOgCy786oP5MuT9xuT1j3Y1hz+N4
+            /R8tfGwjpN62ozYKB0Mj12WayhTSOWnl2FQ8c3LgtOiRhRbmfF/XDw==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1fxxzpnfse8nd9wz78ht3m0plrmraacf4cpga0pe8fm2tdnqcgy8q7qsyvp
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA0MG56am1GTHFCVmtCOG1B
+            ZjVtbjE3L3BnTWhjdTc2bkpJRFJKZE1LNUJnClREQTh6WnlEVjVJemVBeHVmVkZ6
+            SGZTeXp5cVUvdk8zcmhnMjhsRUo3SkEKLS0tIDc1dk04cWlmQ0xWUWFpRHFoUy9K
+            RExCTWJxMFpoMGpCV3JuVmg4VDgzb00KQ9CDA5NrQJmY7dKyBXbdsN1jKQ0wttYR
+            HEdf2txIPpczrk2hFwereL0yxvClOjLovvePcn7Z1G5pQiq5Up5/XA==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age190htw7prp4vln076dxjx3gxxaq06h0zl0te7cqgpx79vl3lhkaes8suy05
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBFVGhuUFh3UjRWMDBrNHl2
+            Z29qVnhkV2JIZ2J4NEpyVEVrbEpleVRaTEdJClpRaC9DSmltd2FRVVdNLzJXRkxz
+            M29IMkh4aVh6RlgycTZFbERGQnNQVlkKLS0tIG8ycnVoOGR6cmplMkNYOXVrcGtj
+            OHJNenBRZ1pFSDEzZDBieHFkRjZZaFkKBCrrAxHld4OYTBUfKMq1E2V3bEaZOgdu
+            4I0fGBQ9VTKK6JM4vVzIM9/RHmPqJWkxNSesxxqkOAewex/RR6ndLA==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1ukpqxzl44mnjpy5r96sfuc5sqzm47u4k8ujjh5qdgy6jvl9uqgpspymqfk
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSAySkhiUEhlSko1SEc5NlNX
+            dXN0OGJxZkZLZ0NPSmN2QTU3SXhVODFVakNzCkVhT25PTDBiaGEzTlV6ekRDZWN4
+            Z25WYkd6ZzRYaEdCQzBIZU1WSU13L2cKLS0tIHJ5V0JkYkVSdkMwYVNONzZoT0RV
+            TkdtZW1GR3ppYldJalgvYi82dllDaXMKx2kvTvWlSsVkvAd6rLQC+AClnGSi+nk1
+            7toIeJqNsIloj92IWi2cZf57pw0BJX0Aa83FMr+AQAajhydh5gbizQ==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age15kh7akxlx7zn00tey79rq2g8lgs4j5y77rcnyfxrxap8ckfu0a9sqvtdhh
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSAzM3RTZ1VOaXQwTCsrMEV3
+            Zmg2VERzZy95dkM5eFZkbzBWRmtQSDVaT3lvClZzQWJFSkVEeFc2YU05aXVKczdx
+            YzJGeWE4K2pmNytLNmNoeTZwVExydm8KLS0tIEVpYitFU2plblRQTk12MHcrZXNR
+            dGdBUXhXTnRQTXBUMlVkdkFHcFpKZ3cKN2fMs6FsNX4M50GjGBO5ILa+ZW1Xm+hT
+            LsGH6c6JssI4Yf7BDagZsZRi3pCcVZsW8r3PneVz2F0fII3I9ej9yQ==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1ehkswwz2pqaz4svzh7ela5tdnssl8kn6d4vwwxd6zwg8exfpd43syyrrjp
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA3L0hLSUxKRDY5WTRKQ0hY
+            bEJ1WEhCYm8vYjI1ekFyZDU3ZjlySUV3c1RvCkN1ak1YNTEyY0VOeldWTVNpeFJJ
+            UkhDcmZ2a1hHTXZYc3Yxa2JSSzROb2sKLS0tIEpXbTN2T3VuRTM2MGxpRFMzN3Vu
+            SWN0Vzg1RXdxa05nd0lHSmFtVGhjRkkKburqnTF/LOrMqiOomMc8vg7Dr2ucTqFd
+            UL+ZXizcKT+LVWoBZpOBmHZ3/3/6rWHKDTa3SGNVvcvDVMZQ/BJNyA==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1vvev5m3shgckl62awa64rtug3lyact7jgxehkuu3vn3wpzulhans75w65s
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSB5Y2JQMC9tZnBSazhSQmsw
+            Ym0vTXVCbUt4ZlUrZUQvR1BVc3E4Yi9KWXpZCmRTblBidHo2RHo1UGhqZG1PYjVm
+            M2ZxRWxML25MK201YXhkdVlIMTBTeUEKLS0tIHRud1pZT09kN3h3WnNFRE9BaTZP
+            YWg2Z0F5a0U3TzRiS0JJOVViRGpPelEKbkfSlclZIO7Owdqxg7ETwf7uNkZKdla1
+            JRft9Nitth0HxEVbkIsvvHIzGjuPfhFgJRxs+pYmdBboLopadMjRFQ==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1eu65wsmez68gegnufl0gqrs0e6w2409mypjlajlq383d7l2e3pjqy5kn6v
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSB0SUJhTXE3b2RxRmg4WmdQ
+            bW1lcldBd2dRalRZUG1PUVpxTTRoSjlMbWxZCkFqUFhsSzBjekhDWFAwczJlam1H
+            RFJkZHBnOTlYT3JIOXFiS1Y1TTBhNEUKLS0tIGc2VVQwbHhGWnRTcTloZ2lZTEFM
+            NzJGS1h2MUdSRHVoLzlQTHdVU2JMV00KWiwaygiH0aY1i9qF+2+373JXLcTKewkb
+            F2b3/loCqC7T5OaJDDXpLteNLsZznIi7zLCBw/t3E4K++cJJvxS1ng==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age17pwyghxr6lq06fw46gwqzhc9ut4paz28rpwx5pmv3cxwak6rgyjsw7lk3w
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBNRU9uRnBTbHNKVkQxOTZv
+            V2l0dEdsaU5WK0JzWHJXSWhrbGFnVUMvWjFzCm5QVFZSaldNUXkwVTA1anprZTIx
+            YzcyVnRRVU8zNjNyb2g4eEFuMGhTbVUKLS0tIDlyczdueTVOL3poZ2RqdGVNcEFy
+            YldOaUNkbnJUU2lSRTZHMzNCdWFHNEEKDm7/U7J+rAwRBV4XSc52jWtpsjabG4ZR
+            QEqqtRZKYPFehKV6jM4vdfqt+sJIcR8QdrZYllryjRsb6Cw/YrDtJw==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1jukmg69cqxnjd0lp5f534jhqe65rxew2hufcmyjxa3rkw6ayef6s2ylcmy
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA3RWgrbVpEZXRJekVCQnVW
+            d1FEaFVsZTBPOEFGdHpDZ0tHcXdoVG55czJZClpkemkwTFAxeFJWN3NwRzZOTGFz
+            RzhYMjVoQ0ZRUjhGYnRFZ2taQVBqck0KLS0tIDU5bGExSEVsRm9OQXZTY1NsN2U4
+            K2gra3dVZnBTcXZkOXAwbW43RnhBM0EKPZupNGKWC8JvY6zwmPWnvNXGMZQ4VBMK
+            B/A0RoNEny481g4PEnR8RgFY6IWsotT6rveoYDcLgumJnlITUpanZg==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1tzsrtwd3p3lrr9g7nv3z5nvmzsz54t2uc6tfqwutp6usmav83s2sck25cc
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBRdUlycEJEMStRYzNCUVNo
+            aFlZeTEycVVlMWhWNDFEZHhhbDBqWDMxK1dJCkZObzJWdW5nUGlNWTFVd0tMNmlm
+            cHZSNlZZN0VRU0xZRk5TT0dFYUFHbkkKLS0tIDdaUlk2eHRCTktPK0lSWGl6MmxK
+            c3B3QTVKSU85a0NDMUdtelRaR0tXdncK1yQTKQixLdMoYHD7EfiLrUbcVkOC9eck
+            /Zm8r+LWS8+lAyvd7eUkrN3AuR/H/9kXXfa888T0z1L/LfeXPUhuJw==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1rf4kj99wuq59k7w8ar326djmgmpl9hcwlnuag07f8gauq8c3y5mqne87s4
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBmakp4M2hBczlrNkFHaTZW
+            ZlYvbGN4alpGRFQ5Z3NucmxhdHpDWUtYS1Y0CkhUaXpKNVpEQ2RicDdhTTJoY0dI
+            eHg4bHRDbHNUeURmeEppdnhjUVVOa00KLS0tIEJJQ25MVzVubGJOTHZXYldoTG04
+            UThuekxFZlBLeEJFVnIrd203VVBPS0UKQ7BTKth3+AxJEYCAp2CtQdXHWCjdMVFD
+            nbijayg+b2Cv5nACxX7adFcfN80GvmbiVx+PKDnK68213SAHugxi3w==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1d0zhx7u3mfs3nktl67npey87cze4dwsfvfvgaje4rh3gwv500yssckcf6u
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBSTDRxc1Y4UTkxc3dxQUN2
+            Zi9icFhRdTVmOHRNZ0QrVU9qMTlQNmt6Y1NjCkZkekxiZWJzdC9XV3ZaWGdDLysw
+            Z0IySzFLZmg2VVJWbmg4ZnJLWW9FeVkKLS0tIHp1QStLTENGcnJrZVVERW5jMytn
+            ODJDdUhoUzJpc2FNTVBMUTZWUWZYMmMKefmM/fewwjRyv7pPmln0mu2XpLyoZDtv
+            qDqS0q0NMdi+ASlKgYl8A2DMO9TBSJmc6SxNMS9LIp0dZYCREJFMRQ==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1jc6wx33hdhgwhk6nzy5rr8fkgmqxk9um639tk5h632nqfyaw8czskdptj9
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBUTjIwa05wTXR1R1FaYVVn
+            R3kxYTlXa1lZR0FTWSsrSE1lN0g5MXAxL21ZCm1Xd0t1UVJXTmR1UVE5Y0plVmtu
+            RCt5RTRBL252aTdxUi93YnNJZ2tWM00KLS0tIEJhK2d2YTJjVHh6dE8ramxtTGpC
+            U0VmdVNRUFRYdjJYZm4vWTBLdjRYVDgK9eJTpg3aGyV+YHSIWPh+0FtmIitchaY6
+            4B2FJZt71VsCwZf4n/GfokVN946MLAEJ1G2TavjLWqWCNhmkM64ngA==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1pgykvq4pmxhhjrqupcp99fyad2uht40pt79dkzg66cfvsjy5apjqls8u68
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSB3dmlIK3VHZHlZanIyNkpx
+            dUtkWkljSFU0SXE0K3oxZ08vSTBhL3B3cHhBCldGSzhjN2lMRThOOFZDUWtDZjdq
+            aTVIeXN5djB3OEdmTUtFZmpKVU5XNjgKLS0tIGdBcnljeE5iZVJKQkJYdnpyUU1Q
+            Z2FONUlveWhnWGs2VXM1ZlNaWENSS2MKTuPGfA505R4vJ7lAsrkodve2Q6jaVqzU
+            dqixxBAdcFQ89rq0z3He15ucgu/Vm4345LSm8JpcAMqupX0Ikbnsqg==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age19ht95nv8uhz2shjmakeut8mc3l5spvrcxs3thhe85an7u02r6sysyv457n
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA5S0o4SlR2aHIrRXlLeHdp
+            MmtEK1BxS2hlVlBVNHYvZ1d0QldDWERiQVVVCk04ZWNjNnZGQkVJL0hscDlGa0cv
+            SlpJNEcwZVhrNk9FcUo3VVQxQSt1Tm8KLS0tIGJuWXpZZFJUaUdtSG54UTFoSzYv
+            MFRxaFhubkJhcTFoV1pzMGc1ZGhEam8KOv07PvhyoG+LIll5pRbyOcMPZLL6GKn/
+            KGnwao8QgHy9FLesA9q9LEYy1IQ8U76l4TtLDKE5+mOqDSBJCFo8cw==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1mhaze5tgvc9lwjpml6dnp3xc292337wgm6376yh6tq4fn492ndjq9h23dq
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSB0eFluenpiUGFDL0o3ZW5P
+            SDdUVGFlSk5kaldzeTd3Y1h0ejAyTCtNMXhJCjdudHBzdnZBRkxuWVc4YkRFaThN
+            dDQ0MThTcENaNEN3YlpqSDNBQkJhQUUKLS0tIFpoNCt5aktyVjFrUmJSQkM3UDBB
+            MkFVQ1VFcjVCbkNWZmdRN085YUo4WkUKJaoop5n/3Rb4myk5cl1kcFwp3RCEHvaW
+            283WmSGgy8G2MzhtAlUkH1vTshz2bJUpjkCtHJ0PxYrzAk/gxBnDaA==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age15me6sx0f8r58xh9v7aqrj6e99n7eu555jkpw422txpkqt4r02v0qpahlyq
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBnWnpoRGVUQmNGRWVhRzRq
+            MEpsSjkvZlJsc3VIMkNnTFEvcWlwRG1BdlRzClUydU5rbHJ3TlFvRWhXSjBVUWx2
+            Y0VvQmJSbDNObWY4TkY2QXJyNlgyN3MKLS0tIEdtcjhmSVZ1ZXMzNC95cXFWdjNM
+            RUp0enNxcnpiNzlWQmh5TXRuOFFPSmMKv7hPMN3kww+zyrKLZ+OgF74S2IXfgeG6
+            Z2M6dvEfPKTyCgHoeo58OJKKGFqC7AmnUBWHhReZfWBRwyK4ES1DAg==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1q3hu6eh3mt4saey7dc3yu04s7knnk2ygpm9xt6mg6rqtem6l0uyq4wzul5
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBpeEV2eU9BZUZkL2xLaFI0
+            V2E5NlhJeGhoODVjc3RsbU95UnNscnhPbVVJCnUrdmc3UERsWmgwWG16Qm9PMzhU
+            NGpFRVlZREtiWnFEZnpnL3pCT3k3NlkKLS0tIEVvRStnRWFjQnZFUCtYTzBxd01V
+            N3Z5M1FMclduSStKb1EzbEp5b2V6VHcKtsXI/VWWARdH+FDHB+R1YKyJqN4g0ahp
+            AGdj6KLPZZDjbGpGITPy+uA8929//X5ZxKOjpccgCJqXFLUjh577oQ==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1tczst3x7thwtcz4vce4rg6kmlsszzm6j45kn2nv860z9wa93a92s05ppmc
+    lastmodified: "2026-07-23T21:15:41Z"
+    mac: ENC[AES256_GCM,data:qFhnPra6IE3wyKQ4WKweON0S0YtD5I0adGZVfA0m6BVilN6bX5oC/1j5NK2oHrsz920hSl0SOF8LrpqOrUyGjSRkPsN4kq8qr9bJcrX4URiktP0oRden5LLt6hf+ZRP7WmRXFqixPkPHJnZIoAvkNnTFce7cDq5NEAHkKUEKG7k=,iv:nyblUDGeu3TUfFivYylOn3C/HITj99qiPI2+mh8AGh4=,tag:FrtRzSCylC4wlIoqZdfx7w==,type:str]
     unencrypted_suffix: _unencrypted
-    version: 3.13.1
+    version: 3.13.2

secrets/gui.yaml

@@ -0,0 +1,52 @@
+wifi-password: ENC[AES256_GCM,data:SZQPtU6PYHbf9o83wq3KTupx,iv:FxO68Pn/+N58r/OPLfkAMYPFpP8TYxszMniFd/01E38=,tag:jwxaY6zDEcO5r9OWSfvUyw==,type:str]
+sops:
+    age:
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSAvMGJzZjVoandxc1FCaDR6
+            Z0hKTVFYRU9JMzA5djk1V3VBZjBETDJDS2xBCnZaRTkzTGg5OVBwckw0cXA4bzFi
+            OHJpdHFwRFBGbXZCbzUrKytGTGx2S2sKLS0tIGNSdW1rQmdOL2lpek91N051L3gz
+            K0duYnF5RlE3cmNXUVN3V0hLM0lUWlUKRYmIfAAfGCJOFwlimYk6bAvIKLokKufR
+            OYnDcUZuPlj9cx/FJNC+7/K7WWmfrpEEeNOVzv7JdTDLjWBslTCWGQ==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBGNHJPODlpaHpIRFNVUlhF
+            WTJsdjB6Rmd6RlEvdDVXckduUkwxUGhVOFF3CkVJMXYzUVRkVjV0VVkzbGc1UlUr
+            VVVXU0wwYkpzU2pZdmlpaVB3enZ1djAKLS0tIGdkeFVrYkdzM1ZNdElJamhpajFp
+            YVZuVCtqUW95R3VHTlBadVoyZUZvNU0K/AtAp1bZ3QXKcVChHfMZVI9AHzTktXIB
+            JNAPKJAxQycMOYPNFklyslOj+oKmvKm5AdXx4XPYW5qOK4k2HMDIQw==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age190htw7prp4vln076dxjx3gxxaq06h0zl0te7cqgpx79vl3lhkaes8suy05
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA0a0dPSmdFbFRjQk1OWWNo
+            Q09VSHhmNlUrVjVXQzcrdi9hVklnRjliWG5vCjJ3bVRUNWdPV3d6STEzcjFxZVQr
+            MXZvdEVOVTlkWEVVNFV5UkUzWThSc2MKLS0tIGIwR1dNMnI3dlIxQ1d6NjhxZ3Vk
+            a1N5aHQvUU5PSEgwVlprcUNEeVorVGsKmmdhYnpOqk3x+5P0h4AfGJco1PGLmAtS
+            67hvtBQo1KSTwFyaYQUByfiTwIeMSu50SxvLi56ogT24CNADW6FjUQ==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1ehkswwz2pqaz4svzh7ela5tdnssl8kn6d4vwwxd6zwg8exfpd43syyrrjp
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBTTXYwS0dXUEI2WjRhZHNp
+            Qzd5STdlWUNFTG04UEdySUhSODF2NklvNVhrCkxFd1pVSjRmb0hPaFpyWCtoQi9K
+            eHVBcUU0amt3K1BONnV5Vnc2Z0JoazQKLS0tIGFrL0I5SjJYYThUS0Y0VVlraW9x
+            Z1VLT1hpNWswd3FsWWVGRTkrNkJOZG8KY74xa+6Pfc9lpupTodTBa1hqIrotE2Gu
+            H5+0g5D9838zxf/p7pzxh7rE7eo2gd9JT9bW2I4Pwn257Omblsyv1A==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age17pwyghxr6lq06fw46gwqzhc9ut4paz28rpwx5pmv3cxwak6rgyjsw7lk3w
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBpUExNcmw2S3hSKytvMVQr
+            ZGJkVStyVjgvTURPSTRyMXZkdjdpRnhQZFV3CkVtQzBsUjFlRjNsc2dwU0R4UnlL
+            YkhtZWVNSW5zWkhJM0NwOUpkVlJGQVUKLS0tIEJiTWxQT0dPeUI0TTIvRys0Sk9s
+            RDFmcjZ6UGkrbWlFb1h0bmdRUlQwT28KK5vH6Svg8lFUKqXSzweb9405B0Z91TaW
+            65G51im23qSOeD+NLBHP+nqIwYrjDlODrgOeW9Up/9rE5rLgFfjoOw==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1mhaze5tgvc9lwjpml6dnp3xc292337wgm6376yh6tq4fn492ndjq9h23dq
+    lastmodified: "2026-07-22T01:15:21Z"
+    mac: ENC[AES256_GCM,data:dC/oIqMUHkOh3AocOwP7Gc6XGH3L+nTqJfhFNts1DNbRXsopNIxVBtIz2pEhwnWSQrqPisDLmPHFBwRpGVn01u8w8IU1FKbAKC0J2nJXF8ozpInbjzDOmehqPWZG7yaKoq8cwAnp5XOk+IVO4l6tPxLxkExU5fT2ALuMq+sgOko=,iv:jaVyArpf6zMCFa6J9X1aQMGrmFq+W2CPZdWO6vVW68c=,tag:S+qF8/FkgHc4uW0e4ICmSQ==,type:str]
+    unencrypted_suffix: _unencrypted
+    version: 3.13.2

secrets/nix-cache.yaml

@@ -4,31 +4,49 @@ sops:
     age:
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBDbHd1Y1dpa2ZiQ2E1bXRP
-            SnkrWHI0V2U1eGFKY0RZamZQQjluS0hGeENZCmduUFQyd1Q5RkZGMGFoenJhNmZh
-            VmZ2OStNaFpJejFxQ2JUZXFpNThaMncKLS0tIEhJdGdQeXEzb25Nbk5YZktCWVUz
-            NUJDUWRoTkd5R2pFblZjS0NSbVR5dkkKDYeW+zRpha04/CasFM91K6v1PpkNGHRu
-            qAoKs9KSg9VxS7ya8RuLmylKRdpPkupm/8SXIJvQuCXp5LWmNJ4zkA==
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBYcFFSVFVxOWp2dCtEVzg4
+            VFF3Mk94Q0xVSDZNL1lBSXBKNzVXaU05TnlzCnhueTd1ek1BZ1JpZUMwM3ZBUHFh
+            UVFKZjduZUpUejJ0enBXK0pwMjZKSDQKLS0tIHJ1Mi9OQThrWndiWFE3WTRJREJN
+            Z2E5WTI5dzB3WDFtaFRoUERZa3N6TDQKy2FK57wDNLSPl2/L/FUBUP8rJZuAOqAR
+            I0hBe4epAKL28PlJ4M9P77qqg893beZK3UIJQ5O6d5fGPMNTJiIzAg==
             -----END AGE ENCRYPTED FILE-----
-          recipient: age10nd382a9klsn2mrs60emdtsxe43pht3a0m9p29phfrhy0wfyt3vsq9r667
+          recipient: age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSB4UktiUUdmd092bnZMdFMz
-            Q05xVlhnNzhPZUY4TjF5bjRCbklacTdJd1RBCnJ4bEVMaWRLZExIUFVEUDBXTnlV
-            MDU4WUk5VlJjdlhVUVpzZXlnWHhqTjQKLS0tIE9iclhGVElPcU9OLzF0bEVjMjVp
-            YzlQTGFYZEhLdTk3N3ZramVjVGRXREUKjOjqO/jX5iEKN43WiJ8qS/1mDfxdj8uO
-            K7Yyc/Yj0qMvGwLNzphjmbT29P7dXk4Ht4TedqCd+8DfhpOgLVIaSA==
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBoaEZ5clpxV0ZQWmhSckxY
+            a3I5djhISUphMmV1RU9DREJsZFpDdktyaUJzClBQSUNvN054aXp4SzNkMmNqNVhP
+            QUdnUEppMmdENzUraHAyRVJLWm95V00KLS0tIHZuVXh4SkdhVU05YzV6VlI2c2RS
+            SWttRW9nS29MM0lJT2x0QS9rVU4yb2cKYZ1gts1qRFdod8PFWl6Tg0Ry0sXhKMrP
+            VwttGQj0iDg6UudB+qa2ngFgAc0C++OJebuLMFnK1K+PvUpfw2nRQg==
             -----END AGE ENCRYPTED FILE-----
           recipient: age120le4a5l8dh3lyfgvmj3d9ksmej6ajs5mer5y7r0vfg3x9fn69dqf8xgzu
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBjaXpvQU9yRUc3ektPMmU5
-            Q0xLWU9mYXVOeTVBNGNsZzJPa1lkVlRUZHlvClhoSVV6YjB1Q3pTTzVvNFlNYkU4
-            Y2RrbFk5SUFKSDVjeFU0Wlc2aGFUMFUKLS0tIDlVeXM4WWRUakg4Zk5mcjdJL3VC
-            S1k5eFBpVnREQlZwYllpeTNhWW5GS1EKi2sMwyJJ0D8acjCZmxlcwdU1sglBuxR7
-            2SEMsctdGC+5E3ilPXvPpZ5RONZHbXxn6kQRBlBv6AJERpGDzsfgfA==
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBKNXBOeS9od1lBd0VGSDRX
+            RE5BM3g0Zk53ZzBhdW9XUFhscmpHdEV1aG1vCnU0OGZZdENBdHd0Tzd5b05BR3RR
+            ZGNZRlVSVk41YzgyRnlHK1NUaXhqZVUKLS0tIGFKcWF3VGdibldnMndmSis5Skc5
+            aEZJVGh1UDFVUldrRndVZURGbVJMUXMKia/z+zwpfcaILCt4fpy7wsR0QkFKf07d
+            QwkV+gEfM3EydhcA7invDieIKbcOUoKKgOmf2sXMgW07CsjG1QXk6w==
             -----END AGE ENCRYPTED FILE-----
-          recipient: age164px2a8e48ptsf9ngtan38aa6jls4jdl26mzrgzf6sn3vcvt49hqjrgr8w
+          recipient: age1xjst4frdh0th6q8m7p7u9g5af7ty5jqeum0p6z8a52a9q7st7ewqw8yl9j
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBpcTJHRy9CZlVWcERMRzlL
+            MVFyVHlRT1hnQTBsSlBYOWtoSzVyejJIM0RzCmFKM3J5cE1BejhHYVl0VzNTSXdj
+            dENsTCtJT0JFT3I0eGJtOFMvdjFmTm8KLS0tIE1zSmhBMjNnelQrdkJ3eVR6SFo1
+            QXJtMVRuS1daOU53dmxGdFIwN0ZOVW8KS0XIDkbp+1W+wUDHkaKXZ84QpcO0zK54
+            FrMzkChowtm/a+RSLVadBGDQv2R4gV89NArP/YAEQa7GK9aHvDlH/g==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1tzsrtwd3p3lrr9g7nv3z5nvmzsz54t2uc6tfqwutp6usmav83s2sck25cc
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA2bnJZUFVVRTBrZExoSWJV
+            NDI2WUluaWJHVVdiR1JBUjhJT0owaTNoL1JBCjh2Y3ZvZXYrSE4raGtrcXVZai9L
+            cUFERVRvMEZPaC9oa01NSHR1ejBIdk0KLS0tIG5ZNmZqZWZxKzd4c2pYOEhwa0li
+            NDRQV1hDZ3ZwZksyTUtjcEVGWVpFMTgKmpLn5Ov03MKITQ7QihjK4GsYlHQiAFAc
+            pI7z78qQv34e7DLLJotxbeWYyX/IOe+DvUm9T8NGY4ujI2y3HjXPlQ==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age15me6sx0f8r58xh9v7aqrj6e99n7eu555jkpw422txpkqt4r02v0qpahlyq
     lastmodified: "2026-07-19T23:30:21Z"
     mac: ENC[AES256_GCM,data:kLGE2xawQT7mx+sfw68hmGk5nCEGiEjZrqTEl9B1dtQmTrMwmoVr/1RISi4LfJrwxy31mDgff4lcIL4wIJuM373uk3X8j4RNyYQNTfKEkORT6r8NHeepNs267O77pKGd7OmcM4MT/BqOnB8ELS7Wlf2ect7CAlvUUVyc8icxgZE=,iv:EYLDsHYHZ1XOQXafOTqHHWpk/OBNq/R6IJnOBYV33E4=,tag:thxrCPC5oGvDjhK7Dz87YA==,type:str]
     unencrypted_suffix: _unencrypted

secrets/server.yaml

@@ -3,22 +3,58 @@ sops:
     age:
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBxaFZURjAxMGRJZEJ5MW1x
-            ZjVwWEQrQlkwNmRibVNiL2RpTTFLeUVDQ3hRCkVIamVnZkM1MnlueloxMHVFQnBF
-            RjV2bnUrZUo4WGZJTmR4Y0xITkxRUkUKLS0tIGlJdVQ5MFBubVhxRUVMWW0wSGpP
-            UGdKNUNPYW9nek1UZ0tWbXd3QVNUNDgKIHOiKelITQdH5R4Nc3WF7mzz15D1f9on
-            VaTdr5qkf8LNNvPI0fxsXA9is5cqeg+KbDRHtUumEhNp6Zrf8zWBkw==
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBwbWFOSlB0ckJFc2hiQTlh
+            eEo1NzZSTWovRXNnTGJDWTVZRUsvbjQ2NGx3CithSDVSbFpCYW9KQjJndzR3aVlL
+            MHBDRmQxSEpTZ1FsRXFWQlE2aFc1VGsKLS0tIDc5bmI4WWtvcStZVk5WNDhva1dk
+            cEVKM2ZCTGdLM2NEbmRudk1SdDNzMTAKB6QCrxxNzazSbif28j6RNIfdfUTKxklM
+            Xip5xoLjTRNOjq561OS34gaMA1GE27YQqsqtgiU15i7SZ7IGefWpZQ==
             -----END AGE ENCRYPTED FILE-----
-          recipient: age10nd382a9klsn2mrs60emdtsxe43pht3a0m9p29phfrhy0wfyt3vsq9r667
+          recipient: age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA3N0hvV01naytDSWVwK1B1
-            MXM1ZkdpaVc2Q3FPV2VBcC83WmcvSjdGUGgwClJGSXZ6YW5JeFlValNJbjVhK29u
-            bUFqN2dRQTI4ZkwyeXNWYk5JeWVJRXcKLS0tIDlMMkNBUnNUSTJwVVFmc2dlcEZS
-            VGQ1VHR2dXB0M3RsalppVWxiUUROM0UKZM/4QDTam3LDTzjnDs41Ije50R7Q7GC4
-            IZbUZjs72rBzY8IkJDbN9JidadEc4NAtMOJwXiJbpZGiCBNfc8+SXw==
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSB2MDVmZGp0bEpwZWRLZFFM
+            ckY1eERsSHFuMnhPK3J0eFRLY3lHYnlEK0NnCmNhQjlnUTNFOVF0UVBLendHYmdx
+            aXVIa2hmNENUNGdZL2FmbTlNekd5NUkKLS0tIDdwbmFGZVFlaG94UEgvOUNxdVlz
+            VHJZenplYVVPa2NUSUFWeEN5bGQ1MkUKT5CqEiCN61aOpvMlBp0effS3bh345E7u
+            wfxrMwMhrEzfnmpkvcafLCn9PMicqLuz48J9ipF5IHLf7MIvbT31ow==
             -----END AGE ENCRYPTED FILE-----
           recipient: age1ll6hj5ggruetgjwjfnplpn5xtq35uhlcdflksx3xmnjm6s3uad9sz70jkf
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBPS05tWG41Z3BwREhxUVRY
+            ZVBMQjhxRDNwUDBjVE1jNnlVOWZtcE81Smk0CnlHaEl2OTd2UnJhWmlHNmY2V3NQ
+            SUJKakZOZkdXeFhnZTF6dmxzTGFzZjAKLS0tIFhwKy84Z0l3cEhSQ0NBbVJIKytM
+            QzhxbTY0SkdkOWN5VDU2d0dTMzlGN00KtgobQ2hsilZnvoq/BesaM/RcYbVNHxSh
+            vEA80nUhyEdRim8WP/yu5KrgHsEVQ9ryclU4B49F1pINdAVaGRo9LA==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1ukpqxzl44mnjpy5r96sfuc5sqzm47u4k8ujjh5qdgy6jvl9uqgpspymqfk
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSB5NUxUMHdrbzl0OEl2RXoy
+            S1ovL05lTXhSNXBXZEtWU2hsdXhBZHlqc21rCnY0a1Z4QXZnTnJyTDR0WVgyYk5m
+            cHJJZkhoM2lNaG51TmY3K0hZeXZKM1kKLS0tIGU2MmV1TTFTY3QyQVNEb2ZxYmlU
+            c1doTkVLZEhKeDJTWmtLWjIrclRUenMKRem1nKPK/ghuipzOLTf6V3Ke5LK5S6LW
+            5ExYf7y++FC90IqkAqeIA67l2KihcPE0DqnBmwrDlNgL5tXyhYV39g==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age15kh7akxlx7zn00tey79rq2g8lgs4j5y77rcnyfxrxap8ckfu0a9sqvtdhh
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBvZkxwdUhOU3diRVFjSkhH
+            SmFDbjYzblFUZ2NLRmpiVGxuUGVrWC9BWERZCkl6MVJ0M3dvNGU0UmQ5Nm1VWmRm
+            ckVjSENWb05qMWtLQzNJd0tUWmgydWsKLS0tICtydnQyUXluWmxwWVpQWVRqOW9L
+            VjhoelJCZjM4aHh4UG0wcUJMSVFGbncK6B1Rou2axRoRQNXudD6BVq5buz9MJapB
+            vYMEhQPVCU2SinltqIrgd00qjgE7+oPnGr5pTFSQisJLlN3X1LUbhQ==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1rf4kj99wuq59k7w8ar326djmgmpl9hcwlnuag07f8gauq8c3y5mqne87s4
+        - enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBvV0E2MnpDZzNkbC9DNGZ4
+            U1JLQ3J3ZHo2cEpraFlSdTA0V01wdlNaMkE0CjQ0SDBXT2tYU2VmZjNja0M0VG5K
+            Z1FkVWhYODVDNkhBR0o1NW43SjZRZW8KLS0tIEtrMFI0YjZIQzd5bHVMSmRSWi83
+            U20zMkg2UWpEclMxalNhMThlWXdhaDQKX6qsiRZqlFVhq5lP5B/XVqStq8Impvx9
+            MTmVRuMzFQ5qTs4BjhIqO25Ez+CI2GAq2K10prdSEin69gSTxntkIg==
+            -----END AGE ENCRYPTED FILE-----
+          recipient: age1jc6wx33hdhgwhk6nzy5rr8fkgmqxk9um639tk5h632nqfyaw8czskdptj9
     lastmodified: "2026-07-19T02:30:40Z"
     mac: ENC[AES256_GCM,data:rKHZjU/MH08ASTlu32HZO9uWmsBYuMCEC6M8gwVhzuWvmablnP05tS2z13XfaWaCEUXk6kmGJKuU0zu5+IKVZgamCF6DAMtxQb6bVCaLsoAm/GSqWQ5VI9eHqgnSSdN/o3ul/33Rf8iBQo4aw8FFAmDVuNz8bfAn0QefFTj0ByI=,iv:JD2gtqRinOY77etg6PUmZNovkYl1Q3F6ZvRi4x7RznQ=,tag:/5IMpWKRVt+l1luCTQE0BA==,type:str]
     unencrypted_suffix: _unencrypted

variables.nix

@@ -26,7 +26,7 @@
   # fresh client that has never manually ssh'd to nix-cache before. Update
   # this if nix-cache's host key is ever rotated or the host is rebuilt
   # from scratch.
-  nixCacheHostKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHrMKZlIGUd3pH9G3AqbsruqUGjxIXMAZw52u9MwiBCn lxc-nix-cache";
+  nixCacheHostKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPeWgMsdaiz4axT/deFc1+0B5bN+GX/NOeW9bbQ0c/IT lxc-nix-cache";
 
   # Public keys authorized to SSH in as remoteBuilderUser on the nix-cache
   # host (modules/nix-cache/server.nix) — one per client host that's allowed
@@ -38,12 +38,27 @@
     "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIGtOWOCS+ImHc7NehguoyD7PbonGosKMZqc9+QR3v/h root@nixos"
     "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHxXTQxFnArK5HXG7czeoybZebCGfxpUdusJkPn+BCSp root@server"
     "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAICMJhrfFayLBG+gWtO6oAvgambw5nWWgztiTFEaaaVRH debian@surface"
+    "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIJEj26SL/emsVjW2YhRucJVp2kTz8WgcEQgjBEBLRikk root@claude"
   ];
 
   # Admin SSH public key, authorized on the primary user of every host and
   # the installer image's nixos/root users.
   adminSshKey = "ssh-rsa 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 wayne@stream";
 
+  # Prestaged wifi SSID for the gui host's NetworkManager profile
+  # (modules/networking/wifi.nix). The password is not here -- it's
+  # sops-encrypted in secrets/gui.yaml (wifi-password) instead, since this
+  # file isn't a secret store.
+  wifiSsid = "nbn-fttp-net-5G";
+
+  # Bare-metal gui host's two disks for a ZFS RAID0 (striped) root pool
+  # (modules/disko/baremetal.nix). Only used transiently at disko-format
+  # time (partitioning); the resulting fileSystems/zpool import reference
+  # by-partlabel/by-id paths afterward regardless, same as
+  # modules/disko/proxmox.nix's own plain "/dev/sda".
+  guiRootDisk1 = "/dev/sda";
+  guiRootDisk2 = "/dev/sdb";
+
   # System
   timeZone = "Australia/Brisbane";
 
@@ -137,6 +152,14 @@
     # shortcuts on the gui build type (hosts/nixos/home.nix).
     pveWeb = 8006;
     pbsWeb = 8007;
+
+    # Tor relay's ORPort — the port other Tor relays connect to for onion
+    # routing traffic (modules/tor/enable-relay.nix). Tor's own conventional
+    # default; opened via services.tor.openFirewall rather than
+    # networking.firewall.allowedTCPPorts directly, but kept here anyway so
+    # it's not a bare literal duplicated between the relay's settings and
+    # anything else that ever needs to reference it.
+    torRelayOrPort = 9001;
   };
 
   # .raw disk image size for every proxmox-* host's standalone Disko image