Stop tracking deployment status in the Hosts table

Same problem as the deployedTargets removal, just in markdown instead of
Nix: which variant of a buildtype is actually deployed is live
infrastructure state, and a committed table can't stay accurate as that
changes -- it already required a manual edit on every migration and had
drifted before. Keep only what doesn't rot: what each target is for, and
stable naming history. Point at the live node / /etc/flake-target instead
for actual deployment status.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>

.gitea/workflows/check-nixos.yml

@@ -13,17 +13,9 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
 
       - name: Install Nix
         uses: DeterminateSystems/nix-installer-action@v19
 
-      # Scoped to files changed since the PR base / previous push -- see
+      - name: Run maintenance checks (secrets, fmt, lint, eval)
-      # scripts/codex-maintenance.sh. CI never passes --full-check: that
-      # full sweep is for local/manual use, since it's slow enough to time
-      # out this runner.
-      - name: Run maintenance checks (secrets, fmt, lint, eval -- changed files only)
-        env:
-          MAINT_BASE_SHA: ${{ github.event.pull_request.base.sha || github.event.before }}
         run: bash scripts/codex-maintenance.sh

.github/workflows/check-nixos.yml

@@ -13,17 +13,9 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
 
       - name: Install Nix
         uses: DeterminateSystems/nix-installer-action@v19
 
-      # Scoped to files changed since the PR base / previous push -- see
+      - name: Run maintenance checks (secrets, fmt, lint, eval)
-      # scripts/codex-maintenance.sh. CI never passes --full-check: that
-      # full sweep is for local/manual use, since it's slow enough to time
-      # out this runner.
-      - name: Run maintenance checks (secrets, fmt, lint, eval -- changed files only)
-        env:
-          MAINT_BASE_SHA: ${{ github.event.pull_request.base.sha || github.event.before }}
         run: bash scripts/codex-maintenance.sh

.sops.yaml

@@ -1,15 +1,12 @@
 keys:
-  - &admin age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad
+  - &admin age10nd382a9klsn2mrs60emdtsxe43pht3a0m9p29phfrhy0wfyt3vsq9r667
   - &docker age19gfn2yedg76dmztm4hncr7vf3r3c9j0qpt4rap7y7gersjk4m3ks2lhd0e
   - &server age1ll6hj5ggruetgjwjfnplpn5xtq35uhlcdflksx3xmnjm6s3uad9sz70jkf
   - &nix-cache age120le4a5l8dh3lyfgvmj3d9ksmej6ajs5mer5y7r0vfg3x9fn69dqf8xgzu
+  - &lxc-minimal age1qz9d4ka4xgexujyd247s7lp737sulp5fhxl5d65fj2ykvc4j4edqrsdks8
   - &nix-minimal age120whqj96g26lsgy4udvgsn8dc9lumh8jeu3a564fx79rjr5lxffqmrljuu
+  - &lxc-nix-cache age164px2a8e48ptsf9ngtan38aa6jls4jdl26mzrgzf6sn3vcvt49hqjrgr8w
   - &proxmox-minimal age10at8862478urh0eeuwh8hzln6ck78jgwtztgxatwqlzwagg77y5snm4xzg
-  - &lxc-nix-cache age1xjst4frdh0th6q8m7p7u9g5af7ty5jqeum0p6z8a52a9q7st7ewqw8yl9j
-  - &lxc-docker age1ezk9x53zt8kcnscdm80jcyf0xq97vndv7jsn3rl8cc0cwm2jmpmq372dzs
-  - &lxc-minimal age1jy444f9d9stygj4p3w9kh54cqcfr654tvr75tdvee5cxsgtdtc9q3v60ep
-  - &lxc-pxe-boot age1fxxzpnfse8nd9wz78ht3m0plrmraacf4cpga0pe8fm2tdnqcgy8q7qsyvp
-  - &lxc-gui age190htw7prp4vln076dxjx3gxxaq06h0zl0te7cqgpx79vl3lhkaes8suy05
 
 creation_rules:
   # Shared across every currently-deployed host: root/nixos password hash,
@@ -27,9 +24,6 @@ creation_rules:
           - *nix-minimal
           - *lxc-nix-cache
           - *proxmox-minimal
-          - *lxc-docker
-          - *lxc-pxe-boot
-          - *lxc-gui
 
   - path_regex: secrets/nix-cache\.yaml$
     key_groups:

AGENTS.md

@@ -7,7 +7,7 @@ servers and workstation.
 
 The flake exposes NixOS configurations named `<platform>-<buildtype>`
 (platforms: `linode`, `proxmox`, `lxc`; build types: `minimal`, `nix-cache`,
-`server`, `docker`, `gui`, `pxe-boot`, `tailscale-exit-node`, `tor-relay`), generated from `modules/platforms/*`
+`server`, `docker`, `gui`, `pxe-boot`), generated from `modules/platforms/*`
 and `modules/build-types/*` by the `mkTarget` function in `flake.nix`. Not
 every combination is built — `pxe-boot` has no `linode` variant. See
 `README.md` for the full current target list; treat `flake.nix` as the
@@ -35,14 +35,9 @@ Use these commands when validating changes:
 ```bash
 bash scripts/codex-setup.sh
 bash scripts/codex-maintenance.sh
+bash scripts/codex-maintenance.sh dry-run
 ```
 
-With no flags, `codex-maintenance.sh` scopes fmt-check/statix/eval to files
-changed against a base ref — this is what CI runs on every push/PR. For the
-full sweep (every host, every package — slow; CI never runs this), use
-`bash scripts/codex-maintenance.sh --full-check` (add `--dry-run` for build
-planning on top of whichever scope is active).
-
 Host evaluation is safe when limited to drvPath checks:
 
 ```bash

CLAUDE.md

@@ -37,22 +37,11 @@ machines when deployed.
 # One-time environment bootstrap (installs Nix if missing, prints hosts)
 bash scripts/codex-setup.sh
 
-# Changed-files-only validation: secret grep (whole repo), nixpkgs-fmt --check
+# Full validation: secret grep, nixpkgs-fmt --check, statix lint, eval all hosts
-# and statix on changed *.nix files, eval of the hosts/packages those changes
-# can affect. This is what CI runs on every push/PR.
 bash scripts/codex-maintenance.sh
 
-# Full sweep: nixpkgs-fmt --check/statix over the whole tree, eval every host
+# Same, plus a dry-run build (no result symlink) of every host's toplevel
-# and package. Slow (minutes) -- CI never runs this; use it locally before a
+bash scripts/codex-maintenance.sh dry-run
-# release or after touching modules/common/*, flake.nix, or variables.nix for
-# extra confidence beyond the automatic full-fallback those paths already
-# trigger in the default mode (see below).
-bash scripts/codex-maintenance.sh --full-check
-
-# Either mode, plus a dry-run build (no result symlink) of every host/package
-# in whichever scope is active
-bash scripts/codex-maintenance.sh --dry-run
-bash scripts/codex-maintenance.sh --full-check --dry-run
 
 # List the hosts the flake currently exposes
 nix eval --json .#nixosConfigurations --apply builtins.attrNames | jq -r '.[]'
@@ -69,96 +58,35 @@ maintenance script pulls them via `nix run github:NixOS/nixpkgs/nixos-25.11#<too
 There is no test suite — "correctness" here means the flake evaluates and
 `nixpkgs-fmt`/`statix` are clean.
 
-With no flags, `codex-maintenance.sh` diffs against a base ref (env
+**In an interactive agent session**, prefer targeted checks over full-repo
-`MAINT_BASE_SHA`, else the PR base SHA in CI, else `HEAD^` locally) and scopes
+sweeps: after editing one or two hosts/modules, evaluate just the
-fmt-check/statix to the changed `*.nix` files and eval to the hosts/packages
+`nixosConfigurations.<host>` you touched (plus any `config.system.build.tarball`
-those changes can affect — a `hosts/<name>/host.nix` edit only evals that
+/`diskoImagesScript`/package output affected) rather than looping over every
-host's targets, a `modules/platforms/<platform>.nix` edit only evals that
+host — `codex-maintenance.sh` evaluates 18 hosts plus every package/tarball/
-platform's hosts, and so on. A change to `flake.nix`, `flake.lock`,
+image variant now and is slow to run after each small change. Reserve a full
-`variables.nix`, `modules/common/*`, or any other `modules/*.nix` file outside
+`codex-maintenance.sh` run for changes that plausibly affect every host
-`platforms/`/`build-types/` (whose blast radius isn't safely inferable from
+(`modules/common/*`, `flake.nix`, `variables.nix`) or as a final check before
-the path alone) falls back to evaluating every host and package, same as
+committing. This is a session-workflow preference only — it does not apply to
-`--full-check` would, just without the whole-tree fmt/statix sweep. This
+CI, which should keep running the full script on every push/PR regardless of
-exists because the whole-tree sweep is what was timing out CI; **CI always
+diff size; that's the point of it.
-runs the plain, no-flag form and never passes `--full-check`.**
-
-The default mode's diff is against the working tree (uncommitted and staged
-edits included, not just committed ones), so it's already the right tool for
-an interactive session too: after editing one or two hosts/modules, plain
-`bash scripts/codex-maintenance.sh` naturally scopes to just what you
-touched. Reserve `--full-check` for changes that plausibly affect every host
-(`modules/common/*`, `flake.nix`, `variables.nix` — though the default mode
-already falls back to evaluating everything for those paths, `--full-check`
-additionally re-checks fmt/statix over the whole tree) or as a final check
-before committing.
 
 ## Scripts
 
-Beyond `codex-setup.sh`/`codex-maintenance.sh` above, `scripts/` is
+Beyond `codex-setup.sh`/`codex-maintenance.sh` above, `scripts/` also has:
-organized by purpose: `scripts/secrets/` (sops/age + SSH host-key
-management), `scripts/proxmox/` (Proxmox deployment), `scripts/lib/`
-(shared helpers, sourced by the scripts below — not run directly), and a
-handful of repo-wide scripts left at the top level (`env.sh`,
-`bump-nixpkgs-release.sh`, plus `codex-setup.sh`/`codex-maintenance.sh`
-above). When adding a new script, put it in the matching subfolder rather
-than the top level, and if it duplicates logic another script already has,
-lift the shared part into `scripts/lib/` instead of copying it.
 
-### `scripts/secrets/`
+- `scripts/sync-host-keys.sh` — generates/registers SSH host keys and their
-
+  `.sops.yaml`/`secrets/*.yaml` recipients for flake targets, idempotently
-- `scripts/secrets/sync-host-keys.sh` — generates/registers SSH host keys
+  (`--all`, `<target>`, `--remove`, `--regenerate-all-keys`, all with
-  and their `.sops.yaml`/`secrets/*.yaml` recipients for flake targets,
+  `--dry-run`). The primary tool for provisioning a new host's secrets
-  idempotently (`--all`, `<target>`, `--remove`, `--regenerate-all-keys`,
+  access — see "Creating a new machine" in `docs/auto-installer.md`.
-  all with `--dry-run`). The primary tool for provisioning a new host's
+- `scripts/prepare-host-key.sh` — narrower predecessor: generates a key by
-  secrets access — see "Creating a new machine" in `docs/auto-installer.md`.
+  an arbitrary name without touching `.sops.yaml`. Still useful to
-- `scripts/secrets/prepare-host-key.sh` — narrower predecessor: generates a
-  key by an arbitrary name without touching `.sops.yaml`. Still useful to
   pre-generate a key before its flake target exists yet, since
   `sync-host-keys.sh` can only act on targets `nixosConfigurations` already
   has.
-- `scripts/secrets/rotate-admin-key.sh <backup-admin-key> [--new-key-file
+- `scripts/create-proxmox-resource.sh` — builds a `lxc-*`/`proxmox-*`
-  <path>] [--dry-run]` — rotates `.sops.yaml`'s `&admin` age key: decrypts
+  target's tarball/disk image and creates it on a real Proxmox node
-  with a backed-up copy of the key currently trusted as `&admin` (verified
+  (`pct create` against the tarball as a CT template / `qm create`+
-  by deriving its public key and comparing, not taken on faith), replaces
-  the `&admin` line with a new key already present in the environment
-  (defaults to wherever sops/age itself would look), and runs
-  `sops updatekeys` on every `secrets/*.yaml`. One-way: the old key can no
-  longer decrypt anything re-encrypted this way. This is the automation
-  for the manual steps `sync-host-keys.sh`/`create-proxmox-resource.sh`
-  print when they bootstrap a brand-new, not-yet-trusted key on a machine
-  with no prior admin access.
-- `scripts/secrets/backup-admin-key.sh <dest-path> [--key-file <path>]
-  [--force] [--dry-run]` — copies the local sops age key (source
-  resolution matches sops/age itself: `$SOPS_AGE_KEY` inline, then
-  `--key-file`, then `$SOPS_AGE_KEY_FILE`, then the XDG default) to an
-  arbitrary destination path with `0600` permissions, validating it's a
-  real age identity and round-tripping the public key before and after the
-  write. Refuses to overwrite an existing `<dest-path>` without `--force`.
-  Purely a local filesystem copy — never touches `.sops.yaml`/
-  `secrets/*.yaml` or the repo at all. The resulting file is exactly what
-  `rotate-admin-key.sh` expects as its backup-key argument.
-- `scripts/secrets/sync-nix-cache-host-key.sh [--check] [--dry-run]
-  [--host <name>]` — detects drift between the ed25519 SSH host key
-  nix-cache is actually serving right now (via `ssh-keyscan`) and
-  `vars.nixCacheHostKey` (`variables.nix`), the value
-  `modules/nix-cache/remote-builder-client.nix` bakes into every real
-  client's declarative `programs.ssh.knownHosts` and
-  `configure-nix-cache-client.sh` hardcodes as its own default for
-  non-NixOS clients. That value has no automatic source of truth — it's
-  set once from whatever nix-cache's host key happened to be at the time,
-  and silently goes stale if the host is ever rebuilt/recreated with a new
-  key, breaking every client's distributed-build SSH trust with no error
-  that points back here. `--check` (used by `codex-maintenance.sh`, which
-  treats an unreachable nix-cache — e.g. from a non-LAN CI runner — as a
-  silent skip rather than a failure) only reports drift; the no-flags form
-  updates both files in place. Declarative clients still need a rebuild to
-  pick up the fix.
-
-### `scripts/proxmox/`
-
-- `scripts/proxmox/create-proxmox-resource.sh` — builds a `lxc-*`/
-  `proxmox-*` target's tarball/disk image and creates it on a real Proxmox
-  node (`pct create` against the tarball as a CT template / `qm create`+
   `importdisk`), or reconfigures an existing resource's cores/memory/disk
   size (`--modify`, always requires typing the VMID back to confirm).
   Checks for an already-uploaded image on the node before building
@@ -168,51 +96,7 @@ lift the shared part into `scripts/lib/` instead of copying it.
   Refuses to create a target whose host identity already exists live on
   the node (checked directly via `qm`/`pct`, not any file in this repo)
   unless `--allow-duplicate-host` is passed. `--dry-run` throughout both
-  modes. The first time it has to bootstrap build tooling on a node (i.e.
+  modes.
-  `nix` wasn't already on its `PATH`), it also runs
-  `scripts/proxmox/configure-nix-cache-client.sh` there (non-fatally — a
-  failure just falls back to building from source / `cache.nixos.org`) so
-  the node substitutes from and can offload builds to nix-cache on every
-  subsequent run, not just this one.
-- `scripts/proxmox/configure-nix-cache-client.sh [--dry-run]
-  [--no-remote-builder] [--no-restart]` — the non-NixOS equivalent of
-  `modules/nix-cache/client.nix`/`remote-builder-client.nix`, for a plain
-  Debian machine with the Nix package manager (not NixOS) already
-  installed: run as root *on that machine* to add nix-cache as a
-  substituter in `/etc/nix/nix.conf` (`https://cache.nixos.org/` kept as
-  fallback) via `extra-substituters`/`extra-trusted-public-keys` so it
-  layers on top of whatever's already there instead of clobbering it, and,
-  if `/root/.ssh/nixremote` is already present (see docs/nix-cache.md
-  "Remote builder SSH keys"), configures it as a distributed-build
-  machine too and trusts nix-cache's SSH host key in
-  `/etc/ssh/ssh_known_hosts`. Idempotent (re-running replaces its own
-  marked block rather than duplicating it); restarts `nix-daemon` by
-  default so the change takes effect immediately.
-
-### `scripts/lib/`
-
-Sourced by the scripts above, never run directly:
-
-- `nix-bootstrap.sh` — `NIX_CONFIG`/`ensure_nix_profile`, shared by
-  `codex-setup.sh`/`codex-maintenance.sh` and the remote build commands
-  `create-proxmox-resource.sh` runs over SSH.
-- `nix-eval.sh` — `NIX_EVAL_FLAGS` plus `list_flake_targets`/
-  `flake_target_hostname` flake-introspection helpers.
-- `ssh-host-keys.sh` — `generate_host_ed25519_key`/`ssh_pubkey_to_age`,
-  shared by `sync-host-keys.sh` and `prepare-host-key.sh`.
-- `sops-age.sh` — `age_pubkey_from_identity_file`/`sops_yaml_admin_pubkey`/
-  `sops_updatekeys` plus the shared sops/age default key-file resolution,
-  shared by `backup-admin-key.sh`, `rotate-admin-key.sh`, and
-  `sync-host-keys.sh`.
-- `confirm.sh` — `confirm_typed`, the "type X back to confirm" destructive-
-  action prompt shared by `create-proxmox-resource.sh` and
-  `sync-host-keys.sh`.
-- `sync-host-keys-edit-sops.py` — the `.sops.yaml` anchor/key_groups editor
-  `sync-host-keys.sh` shells out to (see that script for why: precise,
-  idempotent YAML edits are impractical in bash).
-
-### Top level
-
 - `scripts/env.sh` — shared config (`PROXMOX_HOST`, storage pool, bridge,
   default cores/memory) sourced by `create-proxmox-resource.sh`. Add new
   cross-script config here instead of duplicating it per-script.
@@ -222,16 +106,12 @@ Sourced by the scripts above, never run directly:
   errors on it), so this is the closest equivalent to a single source of
   truth for the tracked release.
 
-`sync-host-keys.sh`, `create-proxmox-resource.sh`, and
+`sync-host-keys.sh` and `create-proxmox-resource.sh` genuinely mutate real
-`rotate-admin-key.sh` genuinely mutate real state when run for real (not
+state when run for real (not `--dry-run`): real `secrets/*.yaml`
-`--dry-run`): real `secrets/*.yaml` recipients, real Proxmox VMs/
+recipients, real Proxmox VMs/containers. They require the operator's own
-containers, real revocation of decrypt access. They require the
+SSH/sops access, which an agent session doesn't have — but don't suggest
-operator's own SSH/sops access, which an agent session doesn't have — but
+running either non-dry-run without the operator's explicit go-ahead even
-don't suggest running any of them non-dry-run without the operator's
+if it becomes technically reachable.
-explicit go-ahead even if it becomes technically reachable.
-`backup-admin-key.sh` only writes a key copy to a path the operator gives
-it — lower-stakes than the others, but it still handles a real private
-key, so treat its destination path choice as the operator's call too.
 
 ## Architecture
 
@@ -254,10 +134,9 @@ nixosSystem {
 ```
 
 Platforms: `linode`, `proxmox`, `lxc`. Build types: `minimal`, `nix-cache`,
-`server`, `docker`, `gui`, `pxe-boot`, `tailscale-exit-node`, `tor-relay`. Not
+`server`, `docker`, `gui`, `pxe-boot`, `tailscale-exit-node`. Not every
-every combination is built — e.g. `pxe-boot` has no `linode` variant
+combination is built — e.g. `pxe-boot` has no `linode` variant (PXE/DHCP/TFTP
-(PXE/DHCP/TFTP need LAN L2 adjacency a Linode VPS doesn't have), and
+need LAN L2 adjacency a Linode VPS doesn't have). Treat `flake.nix`'s
-`tor-relay` currently only exists as `lxc-tor-relay`. Treat `flake.nix`'s
 `generatedTargets` as the source
 of truth for which hosts exist — `README.md`, `AGENTS.md`,
 `docs/flake-lock-automation.md`, and the CI eval workflows
@@ -285,7 +164,7 @@ removing a host.
   `vzdump` backup-archive metadata this doesn't have), no install step —
   see `docs/auto-installer.md`.
 - `modules/build-types/*.nix` — what a system is for:
-  minimal/server/docker/gui/pxe-boot/nix-cache/tailscale-exit-node/tor-relay.
+  minimal/server/docker/gui/pxe-boot/nix-cache.
 - `modules/common/configuration.nix` — base NixOS config imported by every
   host: locale, users, nix settings, git.
 - `modules/common/home.nix` / `hosts/nixos/home.nix` — Home Manager config for
@@ -320,8 +199,7 @@ removing a host.
   and `environmentFile`; used by `hosts/server/host.nix` and
   `hosts/nix-cache/host.nix` to avoid duplicating that boilerplate.
 - `modules/tailscale/`, `modules/docker/`, `modules/networking/`,
-  `modules/traefik/`, `modules/tor/`, `modules/services/*` — single-purpose,
+  `modules/traefik/`, `modules/services/*` — single-purpose, single-host
-  single-host
   feature modules (e.g. `docker/enable-service.nix`,
   `services/zfs/enable-service.nix`). Grep `modules/build-types/*.nix` for
   each build type's `imports` list to see which modules apply where.

README.md

@@ -10,11 +10,11 @@ pieces composed in `flake.nix`:
 
 - **Platforms** (what it runs on): `linode`, `proxmox`, `lxc`
 - **Build types** (what it's for): `minimal`, `nix-cache`, `server`, `docker`,
-  `gui`, `pxe-boot`, `tailscale-exit-node`, `tor-relay`
+  `gui`, `pxe-boot`, `tailscale-exit-node`
 
 Not every combination exists — `pxe-boot` has no `linode` variant, since
-PXE/DHCP/TFTP need LAN L2 adjacency that a Linode VPS doesn't have, and
+PXE/DHCP/TFTP need LAN L2 adjacency that a Linode VPS doesn't have. The full
-`tor-relay` currently only exists as `lxc-tor-relay`. The full list:
+list:
 
 | Target | Purpose |
 | --- | --- |
@@ -27,14 +27,13 @@ PXE/DHCP/TFTP need LAN L2 adjacency that a Linode VPS doesn't have, and
 | `linode-gui` / `proxmox-gui` / `lxc-gui` | Cinnamon desktop workstation — previously the flat `nixos` target |
 | `proxmox-pxe-boot` / `lxc-pxe-boot` | HTTP/iPXE boot asset host — previously the flat `pxe-boot` target |
 | `linode-tailscale-exit-node` / `proxmox-tailscale-exit-node` / `lxc-tailscale-exit-node` | Tailscale exit node |
-| `lxc-tor-relay` | Tor middle relay |
 
 Which variant of a given buildtype is actually deployed isn't tracked
 anywhere in this repo — that's live infrastructure state, not something a
 committed file can keep accurate, and it changes independently of the code.
 Check the Proxmox node itself, or `/etc/flake-target` on a running host (see
 below), if you need to know what's really out there right now.
-`scripts/proxmox/create-proxmox-resource.sh`'s duplicate-host guard works the same
+`scripts/create-proxmox-resource.sh`'s duplicate-host guard works the same
 way: it checks the Proxmox node directly rather than any file here.
 
 Each buildtype's `hosts/<name>/host.nix` carries the per-machine identity
@@ -74,19 +73,10 @@ Safe validation commands for Codex and local review:
 
 ```bash
 bash scripts/codex-setup.sh
+bash scripts/codex-maintenance.sh dry-run
 bash scripts/codex-maintenance.sh
 ```
 
-`codex-maintenance.sh` with no flags (what CI runs on every push/PR) scopes
-fmt-check/statix/eval to files changed against a base ref — fast, but only
-as thorough as the diff. For the full sweep (every host, every package,
-fmt-check and statix over the whole tree — slow, CI never runs this):
-
-```bash
-bash scripts/codex-maintenance.sh --full-check
-bash scripts/codex-maintenance.sh --full-check --dry-run
-```
-
 For individual host evaluation:
 
 ```bash
@@ -123,11 +113,10 @@ Three different paths depending on target, none of them involving a manual
   disk image and attached to a new VM with no install step — see
   `docs/proxmox-images.md`.
 
-`scripts/proxmox/create-proxmox-resource.sh --type lxc|vm --host <name>` automates
+`scripts/create-proxmox-resource.sh --type lxc|vm --host <name>` automates
-either of the last two end to end (host-key registration, building the
+either of the last two end to end (build, host-key registration, upload,
-image directly on the Proxmox node itself, `pct create`/`qm create`), with
+`pct create`/`qm create`), with `--dry-run` and a guard against duplicating
-`--dry-run` and a guard against duplicating an already-deployed host's
+an already-deployed host's identity. See its `--help`.
-identity. See its `--help`.
 
 ## Security Notes
 

docs/auto-installer.md

@@ -19,7 +19,7 @@ see "LXC hosts" immediately below for why those are different.**
 ## LXC hosts
 
 `lxc-*` targets (`lxc-minimal`, `lxc-nix-cache`, `lxc-server`, `lxc-docker`,
-`lxc-gui`, `lxc-pxe-boot`, `lxc-tailscale-exit-node`, `lxc-tor-relay`) are **not** installed via `auto-install.sh` — the
+`lxc-gui`, `lxc-pxe-boot`) are **not** installed via `auto-install.sh` — the
 interactive menu deliberately excludes them. Don't try to select one there;
 `nixos-install` would bind-mount `/` onto `/mnt` (LXC containers have no raw
 disk to partition) and then refuse to touch the filesystem it's currently
@@ -73,9 +73,9 @@ booting one:
 
 First boot runs `boot.postBootCommands` (registers the Nix store DB and
 system profile) — there's no separate activation step to run yourself.
-`scripts/proxmox/create-proxmox-resource.sh --type lxc --host <name>` automates all
+`scripts/create-proxmox-resource.sh --type lxc --host <name>` automates all
-of this (host-key handling, building the tarball directly on the Proxmox
+of this (build, host-key handling, upload, `pct create` with the flags
-node itself, `pct create` with the flags above) — see its `--help`.
+above) — see its `--help`.
 
 Host keys still need pre-seeding the same way as any other host — the
 sops-nix activation-vs-first-boot race is identical regardless of how the
@@ -102,7 +102,7 @@ groups required, got 0`, and *every* secret (including this host's own
 login) permanently fails to decrypt, silently — no error in the boot log
 at all, since the activation step that would install secrets only runs on
 a from-scratch first activation and skips silently once `/run/current-system`
-already exists. `scripts/proxmox/create-proxmox-resource.sh` always builds with
+already exists. `scripts/create-proxmox-resource.sh` always builds with
 `NIXOS_HOST_KEYS_DIR` set for this reason.
 
 ## Layout
@@ -116,10 +116,10 @@ already exists. `scripts/proxmox/create-proxmox-resource.sh` always builds with
   `docs/pxe-boot.md`).
 - `modules/installer/host-keys.nix` — optionally bakes pre-generated SSH
   host keys into the image; see "Host keys" below.
-- `scripts/secrets/sync-host-keys.sh` — admin-workstation tool that generates,
+- `scripts/sync-host-keys.sh` — admin-workstation tool that generates,
   registers, and (via `--remove`/`--regenerate-all-keys`) retires host
   keys; see "Creating a New Machine" below.
-- `scripts/secrets/prepare-host-key.sh` — narrower predecessor: generates a single
+- `scripts/prepare-host-key.sh` — narrower predecessor: generates a single
   key by an arbitrary name without touching `.sops.yaml`. Still useful for
   pre-generating a key *before* its flake target exists (`sync-host-keys.sh`
   can only act on targets `nixosConfigurations` already has); otherwise
@@ -238,7 +238,7 @@ GitHub token behind sops-nix for all of them).
 2. **On your admin workstation, generate and register its host key:**
 
    ```sh
-   ./scripts/secrets/sync-host-keys.sh <flake-target>
+   ./scripts/sync-host-keys.sh <flake-target>
    ```
 
    This generates `host-keys/<flake-target>_ssh_host_ed25519_key(.pub)`,
@@ -250,7 +250,7 @@ GitHub token behind sops-nix for all of them).
 
    Doing this for every host that needs one at once — after adding several
    new targets, or just to catch up any that were missed — is
-   `./scripts/secrets/sync-host-keys.sh --all`. See `scripts/secrets/sync-host-keys.sh --help`
+   `./scripts/sync-host-keys.sh --all`. See `scripts/sync-host-keys.sh --help`
    for its other modes (`--remove`, `--regenerate-all-keys`).
 
 3. **Commit and push.** The flake build the installer uses has to see the

docs/flake-lock-automation.md

@@ -8,14 +8,9 @@ and to verify that declared NixOS hosts still evaluate after dependency updates.
 - A scheduled workflow runs `nix flake update` once per week.
 - On GitHub, any resulting `flake.lock` change is proposed through a pull request.
 - On Gitea, the workflow can commit and push `flake.lock` directly when PR automation is not configured.
-- A separate CI workflow runs `scripts/codex-maintenance.sh` before merge.
+- A separate CI workflow evaluates every configured host before merge, listed
-  Its default mode scopes eval to the hosts/packages a change can affect,
+  dynamically via `nix eval --json .#nixosConfigurations --apply builtins.attrNames`
-  determined from a git diff against the PR base — but a `flake.lock` change
+  rather than hand-enumerated, so it can't drift as `<platform>-<buildtype>`
-  is treated as repo-wide and always falls back to evaluating every host, so
-  a lock-file update PR still gets full coverage. Hosts are still listed
-  dynamically via
-  `nix eval --json .#nixosConfigurations --apply builtins.attrNames` rather
-  than hand-enumerated, so that fallback can't drift as `<platform>-<buildtype>`
   targets are added or removed. See `README.md` for the current target list.
 
 ## Why hosts should stop using `--upgrade-all`

docs/nix-cache.md

@@ -46,26 +46,18 @@ the new key up automatically on next activation — no more manual
 
 ## Remote builder SSH keys
 
-Each client authenticates as `nixremote` using its **own default root SSH
+On each client, install the private key used to authenticate as `nixremote`:
-identity** (`/root/.ssh/id_ed25519`) — not a separately-named or shared
-keypair. If a client doesn't have one yet:
 
 ```bash
-sudo ssh-keygen -t ed25519 -N '' -f /root/.ssh/id_ed25519
+sudo install -d -m 0700 /root/.ssh
+sudo install -m 0600 ./nixremote /root/.ssh/nixremote
+sudo ssh -i /root/.ssh/nixremote nixremote@nix-cache nix-store --version
 ```
 
-Then add its `.pub` contents as a new entry in `vars.remoteBuilderAuthorizedKeys`
+On `nix-cache`, install the matching public key used by `nixremote` authorized keys.
-(`variables.nix`) and rebuild `nix-cache` to pick it up (that list is
-declarative — an imperative `ssh-copy-id nixremote@nix-cache` won't stick;
-it gets overwritten on every rebuild). Verify with:
 
-```bash
+The committed `nixremote` authorized keys are public SSH keys only. Keep the
-sudo ssh -i /root/.ssh/id_ed25519 nixremote@nix-cache nix-store --version
+matching private keys on client hosts and out of the repository.
-```
-
-The committed `remoteBuilderAuthorizedKeys` entries are public SSH keys
-only. Keep the matching private keys on client hosts and out of the
-repository.
 
 nix-cache's own SSH *host* key is trusted declaratively via
 `programs.ssh.knownHosts` in `modules/nix-cache/remote-builder-client.nix`,
@@ -84,8 +76,8 @@ After deployment:
 curl http://nix-cache/nix-cache-info
 nix store ping --store http://nix-cache
 nix show-config | grep -E 'substituters|trusted-public-keys|builders-use-substitutes'
-sudo ssh -i /root/.ssh/id_ed25519 nixremote@nix-cache nix-store --version
+sudo ssh -i /root/.ssh/nixremote nixremote@nix-cache nix-store --version
-nix build nixpkgs#hello --builders 'ssh://nixremote@nix-cache x86_64-linux /root/.ssh/id_ed25519 4 2 big-parallel,kvm,nixos-test,benchmark' -L
+nix build nixpkgs#hello --builders 'ssh://nixremote@nix-cache x86_64-linux /root/.ssh/nixremote 4 2 big-parallel,kvm,nixos-test,benchmark' -L
 nix path-info -r nixpkgs#hello
 curl -I "http://nix-cache/$(basename "$(nix path-info nixpkgs#hello)").narinfo"
 ```

docs/proxmox-images.md

@@ -7,13 +7,11 @@ config (`modules/disko/proxmox.nix`) already used to format a real disk on
 install, so there's nothing host-specific to write; it's available for every
 `proxmox-*` target automatically.
 
-`scripts/proxmox/create-proxmox-resource.sh --type vm --host <name>` automates the
+`scripts/create-proxmox-resource.sh --type vm --host <name>` automates the
 whole walkthrough below (and the equivalent LXC one) end to end, including
-host-key handling and building the image directly on the Proxmox node
+host-key handling and upload — see its `--help`. The steps here are what it
-itself (no local build, no image transfer) — see its `--help`. The steps
+runs under the hood, useful for doing any of it by hand or understanding
-here are what it runs under the hood, useful for doing any of it by hand
+what it does before you trust it against real infrastructure.
-or understanding what it does before you trust it against real
-infrastructure.
 
 ## Building
 
@@ -51,7 +49,7 @@ sudo ./result \
   --build-memory 2048
 ```
 
-Generate the key first with `scripts/secrets/sync-host-keys.sh <hostname>`, same
+Generate the key first with `scripts/sync-host-keys.sh <hostname>`, same
 as any other host — see `docs/auto-installer.md` for the full walkthrough
 (it registers the new key in `.sops.yaml` and re-encrypts the affected
 `secrets/*.yaml` files too, no manual editing needed).

flake-target-refactor-spec.md

@@ -0,0 +1,143 @@
+# Spec: Refactor Flake Targets into Platform × Build-Type Matrix
+
+## Context
+
+The flake at `~/nixos` currently defines these output targets (flat, ad-hoc naming):
+
+- `docker`
+- `linode-minimal`
+- `nix-cache`
+- `nix-minimal`
+- `nixos`
+- `server`
+- `pxe-boot`
+
+Some already follow a `platform-buildtype` convention (`linode-minimal`), most don't.
+`~/nix-auto-installer` is a related repo and should be checked for any coupling to
+these target names (scripts, docs, CI, or install automation that reference them by
+name) before renaming anything.
+
+## Goal
+
+Restructure the flake so targets are generated from two orthogonal concepts:
+
+**Build types** (what the system is for):
+- `minimal`
+- `nix-cache`
+- `server`
+- `docker`
+- `pxe-boot`
+- `gui`
+
+**Platforms** (what it's deployed on):
+- `linode` (Linode VM)
+- `proxmox` (Proxmox VM)
+- `lxc` (Proxmox LXC container)
+
+Final targets should be named consistently as `<platform>-<buildtype>`, e.g.:
+
+```
+linode-minimal    proxmox-minimal    lxc-minimal
+linode-nix-cache  proxmox-nix-cache  lxc-nix-cache
+linode-server     proxmox-server     lxc-server
+linode-docker     proxmox-docker     lxc-docker
+linode-pxe-boot   proxmox-pxe-boot   lxc-pxe-boot
+linode-gui        proxmox-gui        lxc-gui
+```
+
+That's the full matrix (18 targets) if every build type applies to every platform.
+See **Open Questions** below — some combinations may not make sense and should be
+confirmed with me before being built out, not silently included or dropped.
+
+## Migration mapping (old → new)
+
+| Old target        | New target                                          | Notes |
+|--------------------|------------------------------------------------------|-------|
+| `linode-minimal`   | `linode-minimal`                                      | Already correct, keep as-is |
+| `nix-minimal`      | likely `proxmox-minimal` or a platform-less base module | Ambiguous — see Open Questions |
+| `nix-cache`        | base module consumed by `linode-nix-cache`, `proxmox-nix-cache`, `lxc-nix-cache` | Currently platform-less; needs to become a build-type module, not a standalone target |
+| `server`           | base module consumed by `linode-server`, `proxmox-server`, `lxc-server` | Same as above |
+| `docker`           | base module consumed by `linode-docker`, `proxmox-docker`, `lxc-docker` | Confirm docker actually makes sense as an LXC/VM guest build vs. a standalone container image — see Open Questions |
+| `pxe-boot`         | TBD — may stay a single target rather than a per-platform one | See Open Questions |
+| `nixos`            | TBD — unclear what this maps to in the new scheme | See Open Questions |
+
+## Open Questions (Claude Code: raise these with me before implementing, don't guess)
+
+1. **`nixos` target** — what is this currently used for (bare metal install, dev
+   shell, template)? It doesn't obviously map to any of the six build types.
+2. **`nix-minimal` vs `linode-minimal`** — are these two different things, or is
+   `nix-minimal` a leftover/duplicate?
+3. **`pxe-boot` and `gui` across all three platforms** — does PXE boot make sense
+   for an LXC container or a cloud VM (Linode), or is it inherently bare-metal/
+   network-boot only and should remain a single non-platform target? Does `gui`
+   make sense inside an LXC container?
+4. **`docker` as a build type** — is this "a NixOS host configured to run Docker"
+   (which would sensibly have linode/proxmox/lxc variants), or "a Docker container
+   image built by the flake" (which wouldn't take a platform prefix at all, since
+   it doesn't run on Linode/Proxmox/LXC as a guest OS)? These are structurally
+   different and change how it should be wired in.
+5. Confirm whether all 18 combinations should actually exist, or whether this is
+   meant to produce only the combinations that are genuinely useful (e.g. maybe no
+   one needs `lxc-pxe-boot`).
+
+## Implementation approach
+
+1. **Inventory first.** Read the current `flake.nix` and any `nixosConfigurations`/
+   `modules` structure. Map every existing target to what module(s) it actually
+   pulls in. Don't assume — confirm against the real file contents.
+2. **Separate build-type and platform into their own module directories**, e.g.:
+   ```
+   modules/build-types/minimal.nix
+   modules/build-types/nix-cache.nix
+   modules/build-types/server.nix
+   modules/build-types/docker.nix
+   modules/build-types/pxe-boot.nix
+   modules/build-types/gui.nix
+
+   modules/platforms/linode.nix
+   modules/platforms/proxmox.nix
+   modules/platforms/lxc.nix
+   ```
+   Build-type modules should contain only what makes a system "minimal" vs
+   "server" vs "gui", etc. Platform modules should contain only what's specific
+   to running as a Linode VM vs Proxmox VM vs LXC container (virtualisation
+   guest tools, boot method, filesystem/image format, LXC-specific constraints
+   like no kernel modules, etc).
+3. **Generate the target matrix programmatically** in `flake.nix` rather than
+   hand-writing 18 near-identical `nixosConfigurations` entries — e.g. a small
+   function that takes a platform name and build-type name, composes the two
+   modules plus any shared base module, and produces the named output. This
+   keeps future build types/platforms a one-line addition rather than a copy-paste
+   job.
+4. **Only build combinations we've confirmed make sense** (see Open Questions) —
+   don't emit all 18 by default if some are structurally invalid.
+5. **Preserve existing working configs during the transition.** Don't delete the
+   old target names until their replacements build successfully — rename/alias
+   at the end, not the start, so there's no window where the flake is broken.
+
+## Verification
+
+For every new target produced:
+```bash
+nix flake check
+nix build .#nixosConfigurations.<target>.config.system.build.toplevel
+```
+Confirm each builds without evaluation errors before considering it done. If a
+target fails to build, report which one and why rather than silently skipping it.
+
+## Deliverables
+
+- Refactored `flake.nix` using the composed module + generated-matrix approach.
+- New `modules/build-types/*.nix` and `modules/platforms/*.nix` files.
+- Old flat target names removed only after their replacements are verified.
+- A short `README.md` (or section in existing docs) listing the final target
+  names and what each one is for.
+- A summary at the end of what changed, what was removed, and any of the Open
+  Questions above that got resolved differently than expected.
+
+## Out of scope
+
+- Don't touch `~/nix-auto-installer` contents beyond checking it for references
+  to the old target names — if changes there are needed, flag them, don't make
+  them without confirming.
+- Don't add new build types or platforms beyond the ones listed here.

flake.nix

@@ -98,8 +98,6 @@
         linode-tailscale-exit-node = mkTarget { platform = "linode"; buildType = "tailscale-exit-node"; hostPath = ./hosts/tailscale-exit-node/host.nix; };
         proxmox-tailscale-exit-node = mkTarget { platform = "proxmox"; buildType = "tailscale-exit-node"; hostPath = ./hosts/tailscale-exit-node/host.nix; };
         lxc-tailscale-exit-node = mkTarget { platform = "lxc"; buildType = "tailscale-exit-node"; hostPath = ./hosts/tailscale-exit-node/host.nix; };
-
-        lxc-tor-relay = mkTarget { platform = "lxc"; buildType = "tor-relay"; hostPath = ./hosts/tor-relay/host.nix; };
       };
 
       # Auto-install environments (migrated from the former nix-auto-installer

hosts/tor-relay/host.nix

@@ -1,12 +0,0 @@
-_:
-
-{
-  networking.hostName = "tor-relay";
-
-  # No networking.hostId: only ZFS-touching hosts (server, docker) need one
-  # for pool-import safety, and this host does neither.
-
-  # A genuinely new host (not a pre-refactor carry-over), so it tracks the
-  # flake's current nixpkgs release rather than being pinned to an older one.
-  system.stateVersion = "26.05";
-}

modules/build-types/tor-relay.nix

@@ -1,7 +0,0 @@
-{ ... }:
-
-{
-  imports = [
-    ../tor/enable-relay.nix
-  ];
-}

modules/common/configuration.nix

@@ -13,24 +13,6 @@
 
   networking.networkmanager.enable = true; # Easiest to use and most distros use this by default.
 
-  # No host declares a DNS search domain anywhere else, and cross-host
-  # references throughout this repo (vars.nfsServerHost, vars.nixCacheHost,
-  # vars.dockerHost, ...) are bare short names, not FQDNs -- resolving them
-  # depends entirely on whatever network stack happens to be in play
-  # picking up the DHCP-advertised domain as a search suffix. NetworkManager
-  # does that by default, which is why this went unnoticed on
-  # NetworkManager-managed hosts, but LXC containers (modules/platforms/lxc.nix
-  # force-disables NetworkManager and Proxmox writes their systemd-networkd
-  # config itself) never get one. Confirmed live on lxc-docker: systemd-resolved
-  # had no search domain for eth0, "server" failed to resolve
-  # ("Name or service not known") while "server.sweet.home" resolved fine via
-  # the same DNS server, so every NFS mount in modules/docker/mount-data.nix
-  # failed even after fixing the automount/mount=nfs bugs. This applies the
-  # search domain globally via systemd-resolved's own config rather than the
-  # per-link DHCP path, so it isn't at the mercy of whichever component owns
-  # a given host's interface file.
-  networking.search = [ vars.homeDomain ];
-
   # Recommended over the true default (bypasses ZFS's own import safeguards)
   # per the option's own docs; matches hosts/docker/host.nix and
   # modules/services/zfs/enable-service.nix, which already set this

modules/docker/mount-data.nix

@@ -1,15 +1,5 @@
 { config, lib, pkgs, vars, ... }:
 
-let
-  # `x-systemd.automount` never works inside a Linux container (LXC
-  # included, regardless of privilege) -- confirmed live on lxc-docker:
-  # systemd logs "Starting of <unit>.automount unsupported" for every
-  # share and never mounts them. Mount eagerly there instead, with
-  # `nofail` so a boot with the NFS server unreachable doesn't hang
-  # (the VM platforms rely on automount itself to get that same
-  # non-blocking behavior, so they don't need `nofail` too).
-  automountOpts = if config.boot.isContainer then [ "nofail" ] else [ "x-systemd.automount" ];
-in
 {
   fileSystems = {
     ${vars.nfsShares.dockerConfig.mountpoint} = {
@@ -19,8 +9,9 @@ in
       options = [
         "nfsvers=4.2"
         "_netdev"
+        "x-systemd.automount"
         "noatime"
-      ] ++ automountOpts;
+      ];
     };
 
     ${vars.nfsShares.dockerDatabases.mountpoint} = {
@@ -30,8 +21,9 @@ in
       options = [
         "nfsvers=4.2"
         "_netdev"
+        "x-systemd.automount"
         "noatime"
-      ] ++ automountOpts;
+      ];
     };
 
     ${vars.nfsShares.dockerVolumes.mountpoint} = {
@@ -41,8 +33,9 @@ in
       options = [
         "nfsvers=4.2"
         "_netdev"
+        "x-systemd.automount"
         "noatime"
-      ] ++ automountOpts;
+      ];
     };
 
     ${vars.nfsShares.nextcloudData.mountpoint} = {
@@ -52,8 +45,9 @@ in
       options = [
         "nfsvers=4.2"
         "_netdev"
+        "x-systemd.automount"
         "noatime"
-      ] ++ automountOpts;
+      ];
     };
 
     ${vars.nfsShares.raspiVolumes.mountpoint} = {
@@ -63,8 +57,9 @@ in
       options = [
         "nfsvers=4.2"
         "_netdev"
+        "x-systemd.automount"
         "noatime"
-      ] ++ automountOpts;
+      ];
     };
   };
 }

modules/installer/common.nix

@@ -130,7 +130,7 @@
         # at *activation* time, which runs before systemd would otherwise
         # generate one on first boot. Without pre-seeding it here, secrets
         # (including the login password) fail to decrypt on first boot.
-        # Generate the key with scripts/secrets/prepare-host-key.sh first.
+        # Generate the key with scripts/prepare-host-key.sh first.
         #
         # Two places a key can come from, checked in order:
         #   /etc/host-keys  — baked into this image at build time (see
@@ -150,7 +150,7 @@
         else
             echo "WARNING: no SSH host key found for ''${choice} (checked /etc/host-keys and /root/host-keys)"
             echo "sops-nix secrets (including the login password) will NOT decrypt on first boot."
-            echo "Run scripts/secrets/prepare-host-key.sh for host ''${choice} on your admin workstation first,"
+            echo "Run scripts/prepare-host-key.sh for host ''${choice} on your admin workstation first,"
             echo "then either rebuild this image with NIXOS_HOST_KEYS_DIR set, or scp the result to"
             echo "/root/host-keys/ on this machine."
             read -rp "Continue without a pre-seeded key anyway? (y/N): " skip_key

modules/nix-cache/remote-builder-client.nix

@@ -1,14 +1,10 @@
 { pkgs, vars, ... }:
 
 {
-  # Authenticate as nixremote using the client host's own default root SSH
+  # Install the remote builder key on each client host (do not commit private keys):
-  # identity (/root/.ssh/id_ed25519) rather than a separately-named key --
+  #   sudo install -d -m 0700 /root/.ssh
-  # matches vars.remoteBuilderAuthorizedKeys, which already authorizes
+  #   sudo install -m 0600 ./nixremote /root/.ssh/nixremote
-  # each host's own default key (one entry per host, not a shared
+  #   sudo ssh -i /root/.ssh/nixremote nixremote@nix-cache nix-store --version
-  # dedicated keypair). If this host doesn't have one yet:
-  #   sudo -u root ssh-keygen -t ed25519 -N '' -f /root/.ssh/id_ed25519
-  #   # then add its .pub to vars.remoteBuilderAuthorizedKeys and rebuild nix-cache
-  #   sudo ssh -i /root/.ssh/id_ed25519 nixremote@nix-cache nix-store --version
   # Trust nix-cache's SSH host key declaratively so the nix-daemon (root)
   # can connect the first time without a manual ssh-keyscan/known_hosts
   # step on every new client.
@@ -24,7 +20,7 @@
       {
         hostName = vars.nixCacheHost;
         sshUser = vars.remoteBuilderUser;
-        sshKey = "/root/.ssh/id_ed25519";
+        sshKey = "/root/.ssh/${vars.remoteBuilderUser}";
         inherit (pkgs.stdenv.hostPlatform) system;
         maxJobs = 4;
         speedFactor = 2;

modules/platforms/lxc.nix

@@ -14,7 +14,7 @@ let
   # Without this, config.system.build.tarball's built-in system just
   # generates a fresh host key at first boot like any other host would --
   # but sops-nix derives its decryption key from *this* file, and
-  # .sops.yaml only trusts whatever key scripts/secrets/sync-host-keys.sh already
+  # .sops.yaml only trusts whatever key scripts/sync-host-keys.sh already
   # registered for this exact target name. A freshly-generated key can
   # never match that, so every secret (including this host's own login)
   # permanently fails to decrypt. Confirmed live: sops-install-secrets
@@ -26,7 +26,7 @@ let
   hostKeysDir = /. + hostKeysDirStr;
 
   # flakeTarget ("${platform}-${buildType}") comes in via specialArgs from
-  # flake.nix's mkTarget -- exactly the name scripts/secrets/sync-host-keys.sh
+  # flake.nix's mkTarget -- exactly the name scripts/sync-host-keys.sh
   # registers keys under. Deliberately not read back from
   # config.environment.etc."flake-target" (which is set to the same value)
   # -- this module also *contributes* to environment.etc below, and a

modules/raspi/mount-data.nix

@@ -1,4 +1,4 @@
-{ config, lib, vars, ... }:
+{ vars, ... }:
 
 {
   fileSystems.${vars.raspiMountpoint} = {
@@ -9,15 +9,6 @@
       "_netdev"
       "noatime"
 
-      # Explicitly use NFSv4.2 if supported
-      "nfsvers=4.2"
-    ] ++ lib.optionals (!config.boot.isContainer) [
-      # `x-systemd.automount` never works inside a Linux container (LXC
-      # included) -- confirmed live on lxc-docker: systemd logs "Starting
-      # of <unit>.automount unsupported" and never mounts it. `nofail`
-      # above already keeps boot non-blocking there, so plain eager
-      # mounting is fine.
-
       # Don't mount until first access
       "x-systemd.automount"
 
@@ -26,6 +17,9 @@
 
       # Give the Pi/Tailscale a little time to appear
       "x-systemd.device-timeout=10s"
+
+      # Explicitly use NFSv4.2 if supported
+      "nfsvers=4.2"
     ];
   };
 

modules/tailscale/exit-node.nix

@@ -1,16 +1,8 @@
 _:
 
 {
-  imports = [ ./enable-service.nix ];
-
   services.tailscale = {
-    # Enables the sysctl forwarding settings exit nodes/subnet routers need;
+    enable = true;
-    # without this, --advertise-exit-node has no effect.
-    useRoutingFeatures = "server";
-
-    # Lets peers reach this node directly over the tailscale UDP port
-    # instead of relaying through DERP.
-    openFirewall = true;
 
     # extraSetFlags (tailscale set, via the always-on tailscaled-set
     # service), not extraUpFlags -- extraUpFlags is only ever applied by

modules/tor/enable-relay.nix

@@ -1,35 +0,0 @@
-{ pkgs, vars, ... }:
-
-{
-  services.tor = {
-    enable = true;
-
-    # Opens settings.ORPort (and DirPort, unset here) in the firewall —
-    # see the nixpkgs tor module's own networking.firewall.mkIf block.
-    openFirewall = true;
-
-    relay = {
-      enable = true;
-      # Plain middle/guard relay, not "exit" — relays onion traffic between
-      # other Tor nodes without ever making requests to the public internet
-      # on a user's behalf, avoiding the abuse complaints and legal exposure
-      # an exit node invites.
-      role = "relay";
-    };
-
-    settings.ORPort = vars.ports.torRelayOrPort;
-
-    # Unix control socket at /run/tor/control (GroupWritable, group "tor")
-    # -- what nyx below actually monitors the relay through. Nyx's own
-    # default control-socket path (/var/run/tor/control) resolves to the
-    # same place, so no extra nyx config is needed.
-    controlSocket.enable = true;
-  };
-
-  # Lets the primary user's shell session read/write the control socket
-  # above without being root -- otherwise nyx fails to authenticate against
-  # it at all.
-  users.users.${vars.primaryUser}.extraGroups = [ "tor" ];
-
-  environment.systemPackages = [ pkgs.nyx ];
-}

remove-sensetive-info-refactor.md

@@ -0,0 +1,134 @@
+# Spec: Remove Sensitive Information from NixOS Flake
+
+## Goal
+
+Every secret currently readable in plaintext anywhere in this repo (working tree *and* git history) gets removed, replaced with `sops-nix`-managed encrypted references, and rotated. When this is done, the repo should be safe to make public without exposing anything about the systems it configures.
+
+Treat this as three sequential milestones. Do not start git history rewriting (Milestone 3) until Milestones 1 and 2 are fully verified and the flake still builds. This should be its own branch (`refactor/secrets`) until fully verified, then merged.
+
+---
+
+## Milestone 1 — Audit
+
+Before touching anything, produce a complete inventory. Do not guess at scope — grep the whole tree and the whole history.
+
+1. Run a secret scanner across the working tree and full history. Use both, since they catch different things:
+   - `gitleaks detect --source . -v --log-opts="--all"` (scans history too)
+   - `trufflehog git file://. --since-commit=$(git rev-list --max-parents=0 HEAD) --only-verified=false`
+   If neither is installed, add them via a temporary `nix-shell -p gitleaks trufflehog` — don't install anything globally on the host.
+
+2. Manually grep for the categories below, since scanners miss config-specific patterns:
+   - `hashedPassword`, `password`, `initialPassword`, `initialHashedPassword` in any `users.users.*` block
+   - `age.secrets`, `sops.secrets` (if any partial secrets work already exists — check for it)
+   - PSK / `preSharedKey`, `privateKeyFile` inline values (vs. file references) for WireGuard
+   - `authKey`, `apiToken`, `api_key`, `token =`, `secret =` in service modules (Tailscale, Cloudflare, backup tools, etc.)
+   - SSH private key material: search for `BEGIN OPENSSH PRIVATE KEY` / `BEGIN RSA PRIVATE KEY` literals
+   - TLS cert/key pairs committed under e.g. `secrets/`, `certs/`, `pki/`
+   - Real name, personal email, home address, or anything in comments/hostnames that maps a machine to your physical identity or network layout (e.g. hostnames like `wayne-desktop`, static LAN IPs, ISP-identifying info)
+   - `.env` files, `secrets.nix`, `secrets.yaml`, or any file that looks like it was meant to be gitignored but wasn't
+
+3. Produce `secrets-inventory.md` (temporary, delete before finishing) listing: file path, line, secret type, and which host/service it belongs to. This becomes the checklist for Milestone 2 — every row must be either migrated to sops or deleted, with nothing left unaccounted for.
+
+---
+
+## Milestone 2 — Migrate to sops-nix
+
+### 2.1 Set up sops-nix
+
+1. Add the flake input:
+   ```nix
+   sops-nix.url = "github:Mic92/sops-nix";
+   sops-nix.inputs.nixpkgs.follows = "nixpkgs";
+   ```
+2. Import `sops-nix.nixosModules.sops` into each host's module list (or into a shared `common.nix` if all hosts use it).
+3. Generate an age keypair **per host** (not one shared key for everything — a compromised host shouldn't decrypt every other host's secrets):
+   ```
+   nix-shell -p age --run "age-keygen -o /var/lib/sops-nix/key.txt"
+   ```
+   Print the public key (`age-keygen -y`) for each host — you'll need it for `.sops.yaml`.
+4. Also generate one age key for yourself (your admin workstation) so you can edit secrets without needing to SSH into a host: store it at `~/.config/sops/age/keys.txt`, back it up somewhere outside this repo (password manager, offline). **If this key is lost, every secret encrypted with it is unrecoverable — losing the age key is equivalent to losing the secrets.**
+5. Create `.sops.yaml` at the repo root defining creation rules: which age public keys can decrypt which secrets files, keyed by path regex, so e.g. `secrets/hostA.yaml` is decryptable by your admin key + hostA's key, `secrets/hostB.yaml` by your admin key + hostB's key.
+
+### 2.2 Migrate each secret category from the inventory
+
+For each row in `secrets-inventory.md`:
+
+- **Password hashes**: generate hash with `mkpasswd -m sha-512` (or `bcrypt` if your setup wants that), store under `sops.secrets."<name>/hashedPassword"`, reference via `users.users.<name>.hashedPasswordFile = config.sops.secrets."<name>/hashedPassword".path;`. Do not put the *plaintext* password anywhere, only the hash, and only the hash goes into the encrypted sops file.
+- **API tokens / auth keys**: move the raw value into the per-host sops YAML, reference in the module via `config.sops.secrets."<service>/token".path` — most NixOS service modules that take a token also accept a `*File` variant (e.g. `environmentFile`, `tokenFile`); use that instead of passing the value directly.
+- **Private keys / certs**: move the PEM/key content wholesale into a sops secret, output as a file with appropriate `sops.secrets.<name>.path`, `owner`, `mode`, `restartUnits` so the depending service (sshd, wireguard, nginx) reloads when the secret changes.
+- **Personal/identifying info**: this doesn't belong in sops (it's not "secret," it's just information you don't want public). Replace real names/emails with placeholders or move to a small untracked `local.nix` that's `.gitignore`'d and imported conditionally, with a documented template (`local.nix.example`) committed instead.
+
+### 2.3 Verify before moving on
+
+- `nixos-rebuild dry-build --flake .#<host>` succeeds for every host.
+- `sudo nixos-rebuild switch --flake .#<host>` on at least one real machine (or a VM) confirms secrets decrypt and services start.
+- Confirm decrypted secrets land under `/run/secrets/` (not the Nix store — anything placed in `/nix/store` is world-readable by design, so sops-nix's runtime-only placement is the whole point; double check no module accidentally pulls a secret path into a store-built config file).
+- Re-run the grep/scanner sweep from Milestone 1 against the *working tree only* (not history yet) — it should now come back clean.
+
+---
+
+## Milestone 3 — Scrub git history
+
+Do this only after Milestone 2 is merged to your main branch and confirmed working, since it rewrites every commit SHA from the point of the earliest offending commit onward.
+
+**This is destructive and irreversible on your local clone. Back up first:**
+```
+cp -r /path/to/nixos-repo /path/to/nixos-repo-backup-$(date +%F)
+```
+
+1. Install `git-filter-repo` (not the older `git filter-branch` / BFG — filter-repo is the currently maintained, faster, safer tool):
+   ```
+   nix-shell -p git-filter-repo
+   ```
+2. Use the `secrets-inventory.md` list to build a list of literal strings/paths to strip. Two approaches, use both:
+   - Path-based: if whole files were secret (e.g. `secrets.nix`, a `.env`, a private key file), remove them entirely from history:
+     ```
+     git filter-repo --path secrets.nix --path .env --invert-paths
+     ```
+   - Value-based: for secrets embedded inline in files you're keeping (not deleting the whole file), use `--replace-text` with a file listing each literal secret string to replace with `***REMOVED***`:
+     ```
+     git filter-repo --replace-text expressions.txt
+     ```
+3. After filtering, verify: run the Milestone 1 scanners again against full history (`--log-opts="--all"`). They must come back clean.
+4. Force-push the rewritten history:
+   ```
+   git push origin --force --all
+   git push origin --force --tags
+   ```
+5. **Every other clone of this repo (other machines, WSL instances, CI) must be deleted and re-cloned fresh** — a `git pull` against rewritten history will not work cleanly and risks resurrecting the old commits. Don't try to reconcile old clones; throw them away and re-clone.
+6. If this repo has ever been pushed to a public host (GitHub, etc.) or a fork/mirror exists, treat every secret that was ever in history as **permanently compromised regardless of the rewrite** — caches, forks, and Wayback-style archives can retain old commits indefinitely. History scrubbing prevents *future* exposure via `git clone`; it does not undo past exposure.
+
+---
+
+## Milestone 4 — Rotate everything
+
+Because the secrets were exposed in history (even briefly, even in a private repo), the migration is not complete until every credential in the inventory has been **rotated**, not just re-encrypted. Re-encrypting an already-leaked value protects it going forward but doesn't undo the leak.
+
+For each row in the original inventory:
+- Password hashes → change the actual account password, regenerate the hash, update the sops file.
+- API tokens/auth keys → revoke the old token in the issuing service's dashboard (Cloudflare, Tailscale, backup provider, etc.) and generate a new one.
+- SSH/WireGuard private keys → generate new keypairs, update the corresponding public key wherever it's trusted (authorized_keys, peer configs, etc.), retire the old ones.
+- TLS certs → reissue if the private key was exposed.
+
+Keep `secrets-inventory.md` open during this step and check off each row as rotated. Delete the file only once every row is checked off — it should not be committed.
+
+---
+
+## Ongoing prevention
+
+Add a pre-commit hook (or a `nix flake check` step) running `gitleaks protect --staged` so a secret can't be committed again by accident. Document in the repo README (briefly) that new secrets go through `sops <file>` to edit, never as plaintext in a tracked file.
+
+---
+
+## Definition of done
+
+- [ ] Milestone 1 inventory complete and reviewed
+- [ ] All hosts have per-host age keys; admin key backed up outside the repo
+- [ ] Every inventoried secret migrated to sops-nix, referenced via `*File`/`sops.secrets.*.path`, nothing plaintext in the working tree
+- [ ] `nixos-rebuild dry-build` and at least one real `switch` verified per host
+- [ ] Working-tree scanner sweep clean
+- [ ] History rewritten with `git-filter-repo`, force-pushed, full-history scanner sweep clean
+- [ ] All other clones deleted and re-cloned from the rewritten history
+- [ ] Every credential in the original inventory rotated (not just re-encrypted)
+- [ ] Pre-commit secret scanning hook added
+- [ ] `secrets-inventory.md` deleted from the working directory (never committed)

scripts/bump-nixpkgs-release.sh

@@ -129,6 +129,5 @@ echo "flake.lock still points at the old input revisions until refreshed. Either
 echo "  nix flake update nixpkgs home-manager   # just these two inputs"
 echo "  nix flake update                        # everything — see docs/flake-lock-automation.md"
 echo
-echo "Then run 'bash scripts/codex-maintenance.sh --full-check --dry-run' before"
+echo "Then run 'bash scripts/codex-maintenance.sh dry-run' before committing —"
-echo "committing — a channel bump can shift option defaults across every host,"
+echo "a channel bump can shift option defaults across every host."
-echo "and only --dry-run actually builds anything to catch that."

scripts/codex-maintenance.sh

@@ -1,63 +1,22 @@
 #!/usr/bin/env bash
-# Validation entry point for CI and local/agent review.
-#
-# Default mode (what CI runs on every push/PR): fmt-check, statix, and eval
-# are scoped to files that actually changed against a base ref, plus
-# whichever hosts/packages those changes can affect. This exists because
-# the unscoped sweep below is slow enough to time out CI runners -- see
-# --full-check.
-#
-# --full-check: the historical full sweep (every host, every package,
-# fmt --check ./statix check . over the whole tree). Slow -- minutes, not
-# seconds. CI never passes this; run it locally before a release or after
-# touching modules/common/*, flake.nix, or variables.nix if you want extra
-# confidence beyond what the changed-files scope already covers for those
-# paths (see below).
-#
-# --dry-run: adds `nix build --dry-run --no-link` for whatever scope is
-# active (changed-files scope by default, full scope under --full-check).
 set -euo pipefail
 
-script_dir="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+export NIX_CONFIG="${NIX_CONFIG:-}
-# shellcheck source=lib/nix-bootstrap.sh
+experimental-features = nix-command flakes
-source "${script_dir}/lib/nix-bootstrap.sh"
+accept-flake-config = false
-# shellcheck source=lib/nix-eval.sh
+warn-dirty = false
-source "${script_dir}/lib/nix-eval.sh"
+"
 
-repo_root="$(cd "${script_dir}/.." && pwd)"
+MODE="${1:-validate}"
-cd "$repo_root"
 
-full_check=false
+ensure_nix_profile() {
-dry_run=false
+  if [ -f /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh ]; then
-
+    . /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh
-usage() {
+  elif [ -f "$HOME/.nix-profile/etc/profile.d/nix.sh" ]; then
-  cat <<'EOF'
+    . "$HOME/.nix-profile/etc/profile.d/nix.sh"
-Usage: scripts/codex-maintenance.sh [--full-check] [--dry-run]
+  fi
-
-  --full-check  Run the full sweep: fmt-check and statix over the whole
-                repo, eval every host and package. Slow. Never run by CI.
-  --dry-run     Additionally run `nix build --dry-run --no-link` for
-                whatever scope is active.
-
-With neither flag (the CI default), fmt-check/statix/eval are scoped to
-files changed against a base ref (env MAINT_BASE_SHA, else the PR base,
-else HEAD^), plus the hosts/packages those changes can affect.
-EOF
 }
 
-for arg in "$@"; do
-  case "$arg" in
-    --full-check) full_check=true ;;
-    --dry-run) dry_run=true ;;
-    -h|--help) usage; exit 0 ;;
-    *)
-      echo "Unknown argument: $arg" >&2
-      usage >&2
-      exit 1
-      ;;
-  esac
-done
-
 ensure_nix_profile
 
 if ! command -v nix >/dev/null 2>&1; then
@@ -65,6 +24,13 @@ if ! command -v nix >/dev/null 2>&1; then
   exit 127
 fi
 
+hosts_json="$(nix eval --json --no-use-registries --no-accept-flake-config .#nixosConfigurations --apply builtins.attrNames)"
+hosts="$(echo "$hosts_json" | jq -r '.[]')"
+
+echo "Hosts:"
+echo "$hosts"
+
+echo
 echo "Checking for obvious committed secrets..."
 if grep -RInE 'github_pat_|ghp_|access-tokens|hashedPassword[[:space:]]*=' \
   --exclude-dir=.git \
@@ -76,237 +42,71 @@ else
   echo "No obvious token patterns found."
 fi
 
-mapfile -t all_hosts < <(list_flake_targets .)
-mapfile -t all_packages < <(nix eval --json "${NIX_EVAL_FLAGS[@]}" .#packages.x86_64-linux --apply builtins.attrNames | jq -r '.[]')
-
-# host_targets_for_dir <hosts-subdir-name>
-# Prints the nixosConfigurations target names whose hostPath is
-# ./hosts/<dir>/host.nix, derived straight from flake.nix's generatedTargets
-# (one mkTarget { ... } call per line) rather than a hand-maintained table,
-# so it can't drift the way a copied mapping would.
-host_targets_for_dir() {
-  local dir="$1"
-  grep -oE '^[[:space:]]*[A-Za-z0-9_-]+ = mkTarget \{[^}]*hostPath = \./hosts/'"${dir}"'/host\.nix;[^}]*\};' flake.nix \
-    | sed -E 's/^[[:space:]]*([A-Za-z0-9_-]+) = mkTarget.*/\1/' \
-    || true
-}
-
-declare -a changed_files=()
-scope_desc="full repo"
-
-if ! $full_check; then
-  resolve_base_ref() {
-    if [[ -n "${MAINT_BASE_SHA:-}" ]] && git cat-file -e "${MAINT_BASE_SHA}^{commit}" 2>/dev/null; then
-      echo "$MAINT_BASE_SHA"
-      return
-    fi
-    if git rev-parse --verify -q HEAD^ >/dev/null 2>&1; then
-      echo "HEAD^"
-      return
-    fi
-    git hash-object -t tree /dev/null
-  }
-
-  base_ref="$(resolve_base_ref)"
-  echo
-  echo "Changed-files scope: diffing against ${base_ref}"
-  mapfile -t changed_files < <(git diff --name-only --diff-filter=ACMR "$base_ref" -- . | sort -u)
-
-  if [[ ${#changed_files[@]} -eq 0 ]]; then
-    echo "No changed files detected."
-  else
-    printf '  %s\n' "${changed_files[@]}"
-  fi
-  scope_desc="changed files only (base: ${base_ref})"
-fi
-
-# Whole-tree fmt/lint always run under --full-check; otherwise scoped below.
-declare -a changed_nix_files=()
-for f in "${changed_files[@]:-}"; do
-  [[ "$f" == *.nix && -f "$f" ]] && changed_nix_files+=("$f")
-done
-
 echo
 echo "Checking Nix formatting with nixpkgs-fmt..."
-if $full_check; then
+nix run --no-use-registries --no-accept-flake-config github:NixOS/nixpkgs/nixos-25.11#nixpkgs-fmt -- --check .
-  nix run "${NIX_EVAL_FLAGS[@]}" github:NixOS/nixpkgs/nixos-25.11#nixpkgs-fmt -- --check .
-elif [[ ${#changed_nix_files[@]} -gt 0 ]]; then
-  nix run "${NIX_EVAL_FLAGS[@]}" github:NixOS/nixpkgs/nixos-25.11#nixpkgs-fmt -- --check "${changed_nix_files[@]}"
-else
-  echo "No changed .nix files; skipping."
-fi
 
 echo
 echo "Running statix lint..."
-if $full_check; then
+nix run --no-use-registries --no-accept-flake-config github:NixOS/nixpkgs/nixos-25.11#statix -- check .
-  nix run "${NIX_EVAL_FLAGS[@]}" github:NixOS/nixpkgs/nixos-25.11#statix -- check .
-elif [[ ${#changed_nix_files[@]} -gt 0 ]]; then
-  for f in "${changed_nix_files[@]}"; do
-    nix run "${NIX_EVAL_FLAGS[@]}" github:NixOS/nixpkgs/nixos-25.11#statix -- check "$f"
-  done
-else
-  echo "No changed .nix files; skipping."
-fi
-
-# Figure out which hosts/packages this run needs to eval (and, under
-# --dry-run, build). full_check always means "everything"; otherwise a
-# change to flake.nix/flake.lock/variables.nix/modules/common/* (repo-wide
-# inputs) or to any other modules/*.nix outside platforms//build-types
-# (whose blast radius isn't safely inferable from the path alone -- see
-# CLAUDE.md's "Grep modules/build-types/*.nix for each build type's imports
-# list") also falls back to everything, on the same reasoning CLAUDE.md
-# already gives interactive sessions for when to run the full sweep.
-# Anything more targeted -- a host.nix, a platform module, a build-type
-# module -- narrows to just the hosts it can affect.
-declare -A affected_hosts=()
-eval_packages=false
-
-if $full_check; then
-  for h in "${all_hosts[@]}"; do affected_hosts[$h]=1; done
-  eval_packages=true
-else
-  full_fallback=false
-  for f in "${changed_files[@]:-}"; do
-    case "$f" in
-      flake.nix|flake.lock|variables.nix|modules/common/*)
-        full_fallback=true
-        ;;
-    esac
-  done
-
-  if ! $full_fallback; then
-    for f in "${changed_files[@]:-}"; do
-      case "$f" in
-        hosts/*/*)
-          hostdir="${f#hosts/}"
-          hostdir="${hostdir%%/*}"
-          while IFS= read -r t; do
-            [[ -n "$t" ]] && affected_hosts[$t]=1
-          done < <(host_targets_for_dir "$hostdir")
-          ;;
-        modules/platforms/*.nix)
-          platform="$(basename "$f" .nix)"
-          for h in "${all_hosts[@]}"; do
-            [[ "$h" == "${platform}-"* ]] && affected_hosts[$h]=1
-          done
-          ;;
-        modules/build-types/*.nix)
-          buildtype="$(basename "$f" .nix)"
-          for h in "${all_hosts[@]}"; do
-            [[ "$h" == *"-${buildtype}" ]] && affected_hosts[$h]=1
-          done
-          ;;
-        modules/installer/*)
-          # iso.nix (imported by both the "installer" nixosConfigurations
-          # target and netbootSystem, which backs packages.pxe) pulls in
-          # common.nix, so a common.nix change reaches all three.
-          affected_hosts[installer]=1
-          eval_packages=true
-          ;;
-        modules/pxe-boot/*)
-          # stage-installer-artifacts.nix is imported by
-          # modules/build-types/pxe-boot.nix only -- same blast radius as a
-          # build-types/*.nix change, not a packages one.
-          for h in "${all_hosts[@]}"; do
-            [[ "$h" == *"-pxe-boot" ]] && affected_hosts[$h]=1
-          done
-          ;;
-        modules/*)
-          full_fallback=true
-          ;;
-      esac
-    done
-  fi
-
-  if $full_fallback; then
-    echo
-    echo "Changed files affect shared config; falling back to evaluating every host/package."
-    for h in "${all_hosts[@]}"; do affected_hosts[$h]=1; done
-    eval_packages=true
-  fi
-fi
-
-mapfile -t hosts < <(for h in "${!affected_hosts[@]}"; do echo "$h"; done | sort)
 
 echo
-echo "Checking nix-cache host key for drift..."
+echo "Evaluating host toplevel derivations..."
-if bash "${script_dir}/secrets/sync-nix-cache-host-key.sh" --check; then
+for host in $hosts; do
-  :
+  echo "==> $host"
-else
+  nix eval --raw --no-use-registries --no-accept-flake-config ".#nixosConfigurations.${host}.config.system.build.toplevel.drvPath"
-  drift_status=$?
+
-  if [[ "$drift_status" -eq 2 ]]; then
+  # lxc-* hosts deploy via a directly pct-restore-able tarball instead of
-    echo "nix-cache unreachable from here -- skipping host-key drift check."
+  # nixos-install (see docs/auto-installer.md); proxmox-* hosts can
-  else
+  # alternatively be built as a standalone disk image (see
-    echo "WARNING: nix-cache's host key has drifted from variables.nix (see above)." >&2
+  # docs/proxmox-images.md). Both are otherwise-unvalidated buildable
-    echo "  Run 'bash scripts/secrets/sync-nix-cache-host-key.sh' to fix." >&2
+  # surface, easy to silently break without this.
-  fi
+  case "$host" in
-fi
+    lxc-*)
+      echo "==> $host (tarball)"
+      nix eval --raw --no-use-registries --no-accept-flake-config ".#nixosConfigurations.${host}.config.system.build.tarball.drvPath"
+      ;;
+    proxmox-*)
+      echo "==> $host (diskoImagesScript)"
+      nix eval --raw --no-use-registries --no-accept-flake-config ".#nixosConfigurations.${host}.config.system.build.diskoImagesScript.drvPath"
+      ;;
+  esac
+done
 
 echo
-if [[ ${#hosts[@]} -eq 0 ]]; then
+echo "Evaluating buildable packages..."
-  echo "No hosts affected by changed files; skipping host eval."
+packages_json="$(nix eval --json --no-use-registries --no-accept-flake-config .#packages.x86_64-linux --apply builtins.attrNames)"
-else
+packages="$(echo "$packages_json" | jq -r '.[]')"
-  echo "Evaluating host toplevel derivations (${scope_desc})..."
+for pkg in $packages; do
-  for host in "${hosts[@]}"; do
+  echo "==> packages.x86_64-linux.${pkg}"
-    echo "==> $host"
+  nix eval --raw --no-use-registries --no-accept-flake-config ".#packages.x86_64-linux.${pkg}"
-    nix eval --raw "${NIX_EVAL_FLAGS[@]}" ".#nixosConfigurations.${host}.config.system.build.toplevel.drvPath"
+done
 
-    # lxc-* hosts deploy via a directly pct-restore-able tarball instead of
+if [[ "$MODE" == "dry-run" ]]; then
-    # nixos-install (see docs/auto-installer.md); proxmox-* hosts can
-    # alternatively be built as a standalone disk image (see
-    # docs/proxmox-images.md). Both are otherwise-unvalidated buildable
-    # surface, easy to silently break without this.
-    case "$host" in
-      lxc-*)
-        echo "==> $host (tarball)"
-        nix eval --raw "${NIX_EVAL_FLAGS[@]}" ".#nixosConfigurations.${host}.config.system.build.tarball.drvPath"
-        ;;
-      proxmox-*)
-        echo "==> $host (diskoImagesScript)"
-        nix eval --raw "${NIX_EVAL_FLAGS[@]}" ".#nixosConfigurations.${host}.config.system.build.diskoImagesScript.drvPath"
-        ;;
-    esac
-  done
-fi
-
-echo
-if ! $eval_packages; then
-  echo "No packages affected by changed files; skipping package eval."
-else
-  echo "Evaluating buildable packages..."
-  for pkg in "${all_packages[@]}"; do
-    echo "==> packages.x86_64-linux.${pkg}"
-    nix eval --raw "${NIX_EVAL_FLAGS[@]}" ".#packages.x86_64-linux.${pkg}"
-  done
-fi
-
-if $dry_run; then
   echo
-  echo "Running dry-run builds for the active scope. This will not create result symlinks."
+  echo "Running dry-run builds for all hosts. This will not create result symlinks."
-  for host in "${hosts[@]:-}"; do
+  for host in $hosts; do
     echo "==> Dry-run build: $host"
-    nix build --dry-run --no-link "${NIX_EVAL_FLAGS[@]}" ".#nixosConfigurations.${host}.config.system.build.toplevel"
+    nix build --dry-run --no-link --no-use-registries --no-accept-flake-config ".#nixosConfigurations.${host}.config.system.build.toplevel"
 
     case "$host" in
       lxc-*)
         echo "==> Dry-run build: $host (tarball)"
-        nix build --dry-run --no-link "${NIX_EVAL_FLAGS[@]}" ".#nixosConfigurations.${host}.config.system.build.tarball"
+        nix build --dry-run --no-link --no-use-registries --no-accept-flake-config ".#nixosConfigurations.${host}.config.system.build.tarball"
         ;;
       proxmox-*)
         echo "==> Dry-run build: $host (diskoImagesScript)"
-        nix build --dry-run --no-link "${NIX_EVAL_FLAGS[@]}" ".#nixosConfigurations.${host}.config.system.build.diskoImagesScript"
+        nix build --dry-run --no-link --no-use-registries --no-accept-flake-config ".#nixosConfigurations.${host}.config.system.build.diskoImagesScript"
         ;;
     esac
   done
 
-  if $eval_packages; then
+  echo
-    echo
+  echo "Running dry-run builds for all packages."
-    echo "Running dry-run builds for packages."
+  for pkg in $packages; do
-    for pkg in "${all_packages[@]}"; do
+    echo "==> Dry-run build: packages.x86_64-linux.${pkg}"
-      echo "==> Dry-run build: packages.x86_64-linux.${pkg}"
+    nix build --dry-run --no-link --no-use-registries --no-accept-flake-config ".#packages.x86_64-linux.${pkg}"
-      nix build --dry-run --no-link "${NIX_EVAL_FLAGS[@]}" ".#packages.x86_64-linux.${pkg}"
+  done
-    done
-  fi
 fi
 
 echo

scripts/codex-setup.sh

@@ -1,11 +1,19 @@
 #!/usr/bin/env bash
 set -euo pipefail
 
-script_dir="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+export NIX_CONFIG="${NIX_CONFIG:-}
-# shellcheck source=lib/nix-bootstrap.sh
+experimental-features = nix-command flakes
-source "${script_dir}/lib/nix-bootstrap.sh"
+accept-flake-config = false
-# shellcheck source=lib/nix-eval.sh
+warn-dirty = false
-source "${script_dir}/lib/nix-eval.sh"
+"
+
+ensure_nix_profile() {
+  if [ -f /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh ]; then
+    . /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh
+  elif [ -f "$HOME/.nix-profile/etc/profile.d/nix.sh" ]; then
+    . "$HOME/.nix-profile/etc/profile.d/nix.sh"
+  fi
+}
 
 install_nix_if_missing() {
   if command -v nix >/dev/null 2>&1; then
@@ -41,17 +49,6 @@ warn-dirty = false
 build-users-group = nixbld
 EOF
 
-    # The official installer's single-user root path still shells out to
-    # `sudo` to create /nix even though it already knows it's running as
-    # root -- confirmed live against a sudo-less minimal Debian/Proxmox
-    # node, where it fails with "sudo: not found" and prints this exact
-    # mkdir/chown as the manual fix. Pre-create it so that branch of the
-    # installer is skipped entirely.
-    if [ ! -d /nix ]; then
-      mkdir -m 0755 /nix
-      chown root /nix
-    fi
-
     sh <(curl -L https://nixos.org/nix/install) --no-daemon
   else
     sh <(curl -L https://nixos.org/nix/install) --no-daemon
@@ -82,6 +79,13 @@ if ! command -v jq >/dev/null 2>&1; then
 fi
 
 echo "Available NixOS hosts:"
-list_flake_targets .
+hosts="$(nix eval --json --no-use-registries --no-accept-flake-config .#nixosConfigurations --apply builtins.attrNames | jq -r '.[]')"
+echo "$hosts"
 
-echo "Codex setup complete. Run bash scripts/codex-maintenance.sh to validate changes."
+echo "Evaluating all host toplevel derivations..."
+for host in $hosts; do
+  echo "==> Evaluating $host"
+  nix eval --raw --no-use-registries --no-accept-flake-config ".#nixosConfigurations.${host}.config.system.build.toplevel.drvPath"
+done
+
+echo "Codex setup complete."

scripts/create-proxmox-resource.sh

@@ -3,53 +3,31 @@
 # existing ones -- the manual workflows in docs/proxmox-images.md (VM) and
 # docs/auto-installer.md's "LXC hosts" section (container), automated.
 #
-# Images are built directly on the Proxmox node (PROXMOX_REMOTE_REPO_DIR /
-# --remote-repo-dir in scripts/env.sh), not on whatever machine runs this
-# script -- there's no multi-gigabyte image to transfer afterward. The first
-# time a node doesn't have that repo path yet, it's bootstrapped: cloned from
-# this checkout's own `origin` remote, then scripts/codex-setup.sh installs
-# the build tooling (Nix, etc.). Every run after that just `git pull`s it and
-# copies over the locally-managed host-keys/ (gitignored, so a git pull
-# alone wouldn't carry it) before building.
-#
 # Usage:
-#   scripts/proxmox/create-proxmox-resource.sh --type lxc|vm --host <name> [options]
+#   scripts/create-proxmox-resource.sh --type lxc|vm --host <name> [options]
-#   scripts/proxmox/create-proxmox-resource.sh --type lxc|vm --list
+#   scripts/create-proxmox-resource.sh --type lxc|vm --list
-#   scripts/proxmox/create-proxmox-resource.sh --modify --vmid <n> [--cores N] [--memory MB] [--grow-disk GB]
+#   scripts/create-proxmox-resource.sh --modify --vmid <n> [--cores N] [--memory MB] [--grow-disk GB]
 #
 # SAFETY:
 #   - The default (create) mode only ever creates a NEW resource -- it
 #     refuses to run if the target VMID already exists on the node, or if
 #     a VM/CT identified as --host already exists under any other VMID
 #     (checked live against the node; --allow-duplicate-host overrides).
-#   - --allow-duplicate-host distinguishes an exact match (same --type
-#     *and* --host, e.g. re-running --type lxc --host docker while an
-#     lxc-docker container already exists -- almost always a redeploy of
-#     the same target to pick up a rebuilt image) from a cross-type match
-#     (a different platform sharing the same host identity, e.g. a
-#     proxmox-docker VM coexisting with lxc-docker). Only the exact match
-#     is destroyed and replaced, after typing the hostname back to
-#     confirm (outside --dry-run) -- a cross-type match is always left
-#     untouched, matching-or-not.
 #   - --modify only ever touches a resource you name explicitly via
 #     --vmid, shows exactly what will change first, and (outside
 #     --dry-run) always requires typing that VMID back to confirm before
 #     anything is sent to the node. There is no bulk/implicit modify.
-#   - Outside of --allow-duplicate-host's exact-match replace above,
+#   - Neither mode can start/stop/delete a resource. Not implemented on
-#     neither mode can start/stop/delete a resource.
+#     purpose -- ask before adding it.
 #
 # See --help for the full option list.
 set -euo pipefail
 
-repo_root="$(cd "$(dirname "$0")/../.." && pwd)"
+repo_root="$(cd "$(dirname "$0")/.." && pwd)"
-# shellcheck source=../env.sh
+# shellcheck source=env.sh
 source "${repo_root}/scripts/env.sh"
-# shellcheck source=../lib/nix-eval.sh
-source "${repo_root}/scripts/lib/nix-eval.sh"
-# shellcheck source=../lib/confirm.sh
-source "${repo_root}/scripts/lib/confirm.sh"
 
-sync_keys="${repo_root}/scripts/secrets/sync-host-keys.sh"
+sync_keys="${repo_root}/scripts/sync-host-keys.sh"
 
 usage() {
   cat <<EOF
@@ -75,26 +53,16 @@ Create mode (default):
                           Refuses to run if this ID already exists.
   --disk-size <GB>           lxc only: rootfs size for \`pct create\`
                               (default: \$PROXMOX_DEFAULT_LXC_DISK_GB, ${PROXMOX_DEFAULT_LXC_DISK_GB}).
-  --image <path>              Use this local image/tarball (uploaded to the
+  --image <path>              Use this local image/tarball instead of
-                              node via scp) instead of checking the node /
+                              checking the node / building one from the flake.
-                              building one there from the flake.
   --force-rebuild                Skip the "does the node already have this
                                   image" check -- always build fresh and
                                   overwrite what's there.
-  --remote-repo-dir <path>       Where this flake repo lives (or gets
-                                  cloned) on the node, and is built from
-                                  (default: \$PROXMOX_REMOTE_REPO_DIR, ${PROXMOX_REMOTE_REPO_DIR}).
   --allow-duplicate-host        Required if a VM/CT identified as --host
                                 already exists on the node (checked live via
                                 qm/pct, not any file in this repo) --
                                 otherwise refused, since it'd share that
-                                host's hostName/hostId. An existing resource
+                                host's hostName/hostId.
-                                of this *same* --type (e.g. re-running --type
-                                lxc --host docker over an existing lxc-docker)
-                                is destroyed and replaced, after confirming --
-                                a different --type sharing the same --host
-                                (e.g. a proxmox-docker VM) is always left
-                                untouched.
 
 Modify mode (reconfigure an EXISTING resource -- requires --modify):
   --modify                Switch to modify mode.
@@ -146,7 +114,6 @@ storage="$PROXMOX_STORAGE"
 iso_storage="$PROXMOX_ISO_STORAGE"
 bridge="$PROXMOX_BRIDGE"
 node="$PROXMOX_HOST"
-remote_repo_dir="$PROXMOX_REMOTE_REPO_DIR"
 do_list=0
 allow_duplicate_host=0
 force_rebuild=0
@@ -167,7 +134,6 @@ while [[ $# -gt 0 ]]; do
   --iso-storage) iso_storage="$2"; shift 2 ;;
   --bridge) bridge="$2"; shift 2 ;;
   --node) node="$2"; shift 2 ;;
-  --remote-repo-dir) remote_repo_dir="$2"; shift 2 ;;
   --list) do_list=1; shift ;;
   --allow-duplicate-host) allow_duplicate_host=1; shift ;;
   --force-rebuild) force_rebuild=1; shift ;;
@@ -232,7 +198,8 @@ cmd_modify() {
   fi
 
   echo
-  if ! confirm_typed "$vmid" "Type the VMID (${vmid}) to confirm these changes: "; then
+  read -rp "Type the VMID (${vmid}) to confirm these changes: " confirm
+  if [[ "$confirm" != "$vmid" ]]; then
     echo "Cancelled -- input didn't match ${vmid}."
     exit 1
   fi
@@ -273,21 +240,15 @@ platform_prefix="lxc"
 [[ -z "$memory" ]] && memory="$PROXMOX_DEFAULT_MEMORY_MB"
 
 # --- discover / resolve the flake target from --host --------------------
-# Emits "<target>\t<hostName>" pairs for every ${platform_prefix}-* flake
-# target -- the one source both --list and the --host lookup below read
-# from, so they can never see a different set of targets from each other.
-targets_for_platform() {
-  local target
-  for target in $(list_flake_targets "$repo_root" 2>/dev/null | grep -- "^${platform_prefix}-"); do
-    printf '%s\t%s\n' "$target" "$(flake_target_hostname "$repo_root" "$target")"
-  done
-}
-
 list_hosts() {
   local target hostname
-  while IFS=$'\t' read -r target hostname; do
+  for target in $(nix eval --json --no-use-registries --no-accept-flake-config \
+    "${repo_root}#nixosConfigurations" --apply builtins.attrNames 2>/dev/null \
+    | jq -r --arg p "${platform_prefix}-" '.[] | select(startswith($p))'); do
+    hostname="$(nix eval --raw --no-use-registries --no-accept-flake-config \
+      "${repo_root}#nixosConfigurations.${target}.config.networking.hostName" 2>/dev/null)"
     printf '  %-12s -> %s\n' "$hostname" "$target"
-  done < <(targets_for_platform)
+  done
 }
 
 if [[ "$do_list" -eq 1 ]]; then
@@ -302,12 +263,16 @@ if [[ -z "$host" ]]; then
 fi
 
 flake_target=""
-while IFS=$'\t' read -r target hostname; do
+for target in $(nix eval --json --no-use-registries --no-accept-flake-config \
-  if [[ "$hostname" == "$host" ]]; then
+  "${repo_root}#nixosConfigurations" --apply builtins.attrNames \
+  | jq -r --arg p "${platform_prefix}-" '.[] | select(startswith($p))'); do
+  hn="$(nix eval --raw --no-use-registries --no-accept-flake-config \
+    "${repo_root}#nixosConfigurations.${target}.config.networking.hostName")"
+  if [[ "$hn" == "$host" ]]; then
     flake_target="$target"
     break
   fi
-done < <(targets_for_platform)
+done
 
 if [[ -z "$flake_target" ]]; then
   echo "ERROR: no ${platform_prefix}-* target has hostName '${host}'." >&2
@@ -335,13 +300,12 @@ fi
 # this script itself always uses unless --name is overridden) -- a guest
 # manually renamed on the node afterwards wouldn't match, but nothing here
 # creates guests that way.
-if [[ "$dry_run" -eq 1 ]]; then
+if [[ "$allow_duplicate_host" -eq 1 ]]; then
+  echo
+  echo "--allow-duplicate-host: skipping the check for an existing '${host}' on ${node}."
+elif [[ "$dry_run" -eq 1 ]]; then
   echo
   echo "[dry-run] would check ${node} for an existing VM/CT identified as '${host}'"
-  if [[ "$allow_duplicate_host" -eq 1 ]]; then
-    echo "[dry-run] --allow-duplicate-host: an existing ${type} named '${host}' would be" \
-      "destroyed and replaced; a different-type match would be left untouched"
-  fi
 else
   echo
   echo "==> Checking ${node} for an existing VM/CT identified as '${host}'..."
@@ -356,7 +320,6 @@ for id in $(pct list 2>/dev/null | awk 'NR>1{print $1}'); do
   n="$(pct config "$id" 2>/dev/null | grep -oP '^hostname:\s*\K\S+' || true)"
   [[ "$n" == "$target" ]] && echo "lxc ${id} ${n}"
 done
-exit 0
 REMOTE_SCRIPT
   )" || ssh_check_status=$?
   if [[ "$ssh_check_status" -ne 0 ]]; then
@@ -366,89 +329,17 @@ REMOTE_SCRIPT
     echo "check entirely)." >&2
     exit 1
   fi
-
-  # Split into "exact" (same resource kind as --type -- i.e. literally this
-  # same host+platform combo already exists, almost always a redeploy of
-  # the same target to test a rebuilt image) vs "cross-type" (a different
-  # platform sharing this host identity, e.g. a stopped proxmox-docker VM
-  # coexisting with an lxc-docker container -- a deliberate, valid setup
-  # this script has never managed and still won't). Read via a herestring
-  # (not a pipe) so the appends below survive outside the loop.
-  this_kind="$type"
-  exact_matches=""
-  cross_matches=""
   if [[ -n "$existing" ]]; then
-    while read -r kind id n; do
+    echo "ERROR: '${host}' already exists on ${node}:" >&2
-      [[ -z "$kind" ]] && continue
+    echo "$existing" | while read -r kind id n; do
-      if [[ "$kind" == "$this_kind" ]]; then
-        exact_matches+="${kind} ${id} ${n}"$'\n'
-      else
-        cross_matches+="${kind} ${id} ${n}"$'\n'
-      fi
-    done <<<"$existing"
-  fi
-
-  if [[ -n "$exact_matches" && "$allow_duplicate_host" -ne 1 ]]; then
-    echo "ERROR: '${host}' already exists on ${node} as this same resource type:" >&2
-    echo "$exact_matches" | while read -r kind id n; do
-      [[ -z "$kind" ]] && continue
-      echo "  - ${kind} VMID ${id} (${n})" >&2
-    done
-    echo "Refusing to create a second ${this_kind} sharing this identity. Pass" >&2
-    echo "--allow-duplicate-host to destroy it and create a fresh one in its place" >&2
-    echo "(after confirming), or use --modify to reconfigure the existing one instead." >&2
-    exit 1
-  fi
-
-  if [[ -n "$cross_matches" && "$allow_duplicate_host" -ne 1 ]]; then
-    echo "ERROR: '${host}' already exists on ${node} as a different resource type:" >&2
-    echo "$cross_matches" | while read -r kind id n; do
-      [[ -z "$kind" ]] && continue
       echo "  - ${kind} VMID ${id} (${n})" >&2
     done
     echo "Refusing to create a second resource sharing this identity. Pass" >&2
     echo "--allow-duplicate-host to create one anyway (it gets its own distinct" >&2
-    echo "sops key and VMID -- the existing resource above is left untouched)," >&2
+    echo "sops key and VMID -- the existing resource(s) above are left untouched)," >&2
     echo "or use --modify to reconfigure the existing one instead." >&2
     exit 1
   fi
-
-  if [[ -n "$cross_matches" ]]; then
-    echo "--allow-duplicate-host: '${host}' also exists on ${node} as a different resource" \
-      "type -- leaving it untouched:"
-    echo "$cross_matches" | while read -r kind id n; do
-      [[ -z "$kind" ]] && continue
-      echo "  - ${kind} VMID ${id} (${n})"
-    done
-  fi
-
-  if [[ -n "$exact_matches" ]]; then
-    echo "--allow-duplicate-host: '${host}' already exists on ${node} as this same resource" \
-      "type -- it will be destroyed and replaced:"
-    echo "$exact_matches" | while read -r kind id n; do
-      [[ -z "$kind" ]] && continue
-      echo "  - ${kind} VMID ${id} (${n})"
-    done
-    echo
-    if ! confirm_typed "$host" "Type the hostname (${host}) to confirm destroying the above and replacing it: "; then
-      echo "Cancelled -- input didn't match ${host}." >&2
-      exit 1
-    fi
-    echo "$exact_matches" | while read -r kind id n; do
-      [[ -z "$kind" ]] && continue
-      echo "==> Destroying ${kind} VMID ${id} (${n})..."
-      if [[ "$kind" == "vm" ]]; then
-        # qm destroy has no --force to stop-then-destroy in one call (pct's
-        # does) -- stop explicitly first if it's running.
-        if ssh "$ssh_target" "qm status ${id}" 2>/dev/null | grep -q running; then
-          ssh "$ssh_target" "qm stop ${id}"
-        fi
-        ssh "$ssh_target" "qm destroy ${id} --purge 1"
-      else
-        ssh "$ssh_target" "pct destroy ${id} --force 1 --purge 1"
-      fi
-    done
-  fi
 fi
 
 echo "Target: ${flake_target} (host=${host}, type=${type}) -> Proxmox resource '${name}'"
@@ -513,99 +404,6 @@ if [[ "$type" == "lxc" ]]; then
 fi
 remote_path="${remote_dir}/${remote_filename}"
 
-# --- ensure the flake repo (+ tooling) exists on the node, and is current --
-# Bootstraps once (git clone from this checkout's own `origin`, then
-# scripts/codex-setup.sh installs Nix + friends) if ${remote_repo_dir}
-# doesn't exist yet on the node; otherwise just `git pull`s it, so the image
-# built there reflects what's actually committed and pushed. Only called
-# right before an actual remote build below -- reusing an image already on
-# the node, or an explicit --image, never touch the node's checkout at all.
-ensure_remote_repo() {
-  echo
-  echo "==> Ensuring ${remote_repo_dir} exists and is current on ${node}..."
-  if [[ "$dry_run" -eq 1 ]]; then
-    echo "[dry-run] would ensure ${remote_repo_dir} exists on ${node} (clone if missing, git pull if present), and would verify/bootstrap build tooling there (scripts/codex-setup.sh) if \`nix\` isn't already on PATH -- and if that bootstrap actually ran, would also configure ${node} as a nix-cache client (scripts/proxmox/configure-nix-cache-client.sh)"
-    return
-  fi
-
-  if ssh "$ssh_target" "test -d '${remote_repo_dir}/.git'"; then
-    echo "Repo present -- pulling latest..."
-    ssh "$ssh_target" "cd '${remote_repo_dir}' && git pull --ff-only"
-  else
-    local origin_url
-    origin_url="$(git -C "$repo_root" remote get-url origin 2>/dev/null || true)"
-    if [[ -z "$origin_url" ]]; then
-      echo "ERROR: ${remote_repo_dir} doesn't exist on ${node}, and this checkout has no" >&2
-      echo "'origin' remote to clone from. Set one (git remote add origin <url>) or create" >&2
-      echo "${remote_repo_dir} on ${node} yourself (e.g. git clone), then re-run." >&2
-      exit 1
-    fi
-    echo "Not present -- cloning from ${origin_url}..."
-    ssh "$ssh_target" "git clone '${origin_url}' '${remote_repo_dir}'"
-  fi
-
-  # Trivial check, run every time (not just right after a fresh clone) --
-  # confirmed live: a first bootstrap can clone the repo successfully and
-  # still leave the node without a working `nix` (e.g. the node had no
-  # `sudo`, which the Nix installer's root path depends on -- see the fix
-  # in scripts/codex-setup.sh), and a later run with the repo already
-  # present would otherwise never retry it. Sources
-  # scripts/lib/nix-bootstrap.sh's ensure_nix_profile first -- a
-  # single-user Nix install typically only gets sourced into login shells,
-  # and ssh's non-interactive command execution is neither, so a
-  # freshly-installed `nix` still wouldn't be on PATH here without it.
-  #
-  # Just `nix` today -- the only thing the remote build commands below
-  # actually invoke -- but a list (not a single hardcoded check) so a
-  # future remote step needing another tool can add itself here instead of
-  # growing a parallel check.
-  local remote_required_cmds=(nix)
-  local tooling_check_cmd="cd '${remote_repo_dir}' && . scripts/lib/nix-bootstrap.sh && ensure_nix_profile"
-  local cmd
-  for cmd in "${remote_required_cmds[@]}"; do
-    tooling_check_cmd="${tooling_check_cmd} && command -v ${cmd}"
-  done
-
-  if ssh "$ssh_target" "$tooling_check_cmd" >/dev/null 2>&1; then
-    echo "Build tooling already present on ${node}."
-  else
-    echo "==> Bootstrapping build tooling on ${node} (scripts/codex-setup.sh)..."
-    ssh "$ssh_target" "cd '${remote_repo_dir}' && bash scripts/codex-setup.sh"
-
-    # Only on this first-time bootstrap, not every run -- a node that
-    # already has tooling either already went through this once, or had
-    # it configured some other way, and re-running is harmless but
-    # pointless. Non-fatal: this only makes the node's own builds faster
-    # (substitute from nix-cache instead of building from source) and
-    # offloadable to it as a remote builder -- worth trying, not worth
-    # aborting the image build over if nix-cache happens to be down right
-    # now. Needs ensure_nix_profile first, same as the tooling_check_cmd
-    # above -- ssh's non-interactive command execution won't have picked
-    # up a freshly single-user-installed `nix` otherwise.
-    echo "==> Configuring ${node} as a nix-cache substituter/remote-builder client..."
-    if ! ssh "$ssh_target" "cd '${remote_repo_dir}' && . scripts/lib/nix-bootstrap.sh && ensure_nix_profile && bash scripts/proxmox/configure-nix-cache-client.sh"; then
-      echo "WARNING: configure-nix-cache-client.sh failed on ${node} -- continuing without it (${node} will build from source / against cache.nixos.org only)." >&2
-    fi
-  fi
-}
-
-# --- sync locally-managed host-keys/ to the node ---------------------------
-# Gitignored (see .gitignore), so `git pull` above never carries it -- both
-# build paths need it present as NIXOS_HOST_KEYS_DIR / --pre-format-files
-# input on the node itself now that the build runs there. scp (not rsync,
-# not already a dependency anywhere else in this repo) mirrors how this
-# script already transfers the --image case below.
-sync_remote_host_keys() {
-  echo
-  echo "==> Syncing host-keys/ to ${node}..."
-  if [[ "$dry_run" -eq 1 ]]; then
-    echo "[dry-run] would copy ${repo_root}/host-keys/ to ${ssh_target}:${remote_repo_dir}/host-keys/"
-    return
-  fi
-  ssh "$ssh_target" "mkdir -p '${remote_repo_dir}/host-keys'"
-  scp -pr "${repo_root}/host-keys/." "${ssh_target}:${remote_repo_dir}/host-keys/"
-}
-
 # --- build (or reuse an image already on the node) ------------------------
 echo
 local_image=""
@@ -622,7 +420,7 @@ else
   if [[ "$dry_run" -eq 1 ]]; then
     echo "[dry-run] would check: ssh ${ssh_target} -- test -f ${remote_path}"
   elif ssh "$ssh_target" "test -f '${remote_path}'" 2>/dev/null; then
-    echo "Found it -- reusing, skipping build (use --force-rebuild to override)."
+    echo "Found it -- reusing, skipping build and upload (use --force-rebuild to override)."
     image_already_remote=1
   else
     echo "Not found -- will build."
@@ -630,131 +428,69 @@ else
 fi
 
 if [[ "$image_already_remote" -eq 0 && -z "$local_image" ]]; then
-  ensure_remote_repo
+  # Mirrors the real build commands' "${NIX_OPTS[@]}" below -- nix_extra_opts
-  sync_remote_host_keys
+  # (called earlier, once) has already decided whether nix-cache is in play,
-
+  # and the dry-run preview needs to reflect that decision instead of always
-  # Relayed into the remote build below exactly as decided by the local
+  # printing the same command regardless of outcome.
-  # nix_extra_opts call earlier in this script -- that decision (whether
-  # nix-cache is reachable) is made once, locally, same as it always has
-  # been; only *where* the resulting "${NIX_OPTS[@]}" gets used as a `nix
-  # build` flag moves to the node. NIX_EXTRA_OPTS is already a %q-quoted
-  # string built for exactly this eval-based reconstruction (see env.sh).
   nix_opts_display=""
   if [[ ${#NIX_OPTS[@]} -gt 0 ]]; then
     printf -v nix_opts_display '%q ' "${NIX_OPTS[@]}"
     nix_opts_display=" ${nix_opts_display% }"
   fi
-
   if [[ "$type" == "lxc" ]]; then
     if [[ "$dry_run" -eq 1 ]]; then
-      echo "[dry-run] would build on ${node}: NIXOS_HOST_KEYS_DIR=\$(pwd)/host-keys nix build --impure \\"
+      echo "[dry-run] would build: NIXOS_HOST_KEYS_DIR=${repo_root}/host-keys nix build --impure \\"
       echo "[dry-run]   --no-use-registries --no-accept-flake-config${nix_opts_display} \\"
       echo "[dry-run]   .#nixosConfigurations.${flake_target}.config.system.build.tarball"
-      echo "[dry-run] would stage the result at ${remote_path}"
       local_image="<built-tarball>"
     else
-      echo "==> Building LXC tarball for ${flake_target} on ${node}..."
+      echo "==> Building LXC tarball for ${flake_target}..."
-      # Built as a single already-%q-quoted command string, not separate ssh
+      NIXOS_HOST_KEYS_DIR="${repo_root}/host-keys" nix build --impure \
-      # argv elements -- ssh joins remote command args with plain spaces and
+        --no-use-registries --no-accept-flake-config "${NIX_OPTS[@]}" \
-      # hands the result to the remote shell to re-split, which would
+        ".#nixosConfigurations.${flake_target}.config.system.build.tarball" \
-      # otherwise scatter NIX_EXTRA_OPTS (itself several space-separated,
+        --out-link "${repo_root}/result-${flake_target}"
-      # %q-quoted tokens) across the wrong positional parameters below.
+      local_image="$(find "${repo_root}/result-${flake_target}/tarball" -maxdepth 1 -type f | head -1)"
-      printf -v remote_cmd 'bash -s -- %q %q %q %q %q' \
+      echo "Built: ${local_image}"
-        "$remote_repo_dir" "$flake_target" "$remote_dir" "$remote_filename" "$NIX_EXTRA_OPTS"
-      ssh "$ssh_target" "$remote_cmd" <<'REMOTE_SCRIPT'
-set -euo pipefail
-repo_dir="$1"; target="$2"; dest_dir="$3"; dest_name="$4"; nix_extra_opts_str="$5"
-declare -a NIX_OPTS=()
-[[ -n "$nix_extra_opts_str" ]] && eval "NIX_OPTS=(${nix_extra_opts_str})"
-cd "$repo_dir"
-# A single-user Nix install only gets sourced into login shells; this ssh
-# session is neither, so `nix` wouldn't otherwise be on PATH here even
-# right after a successful install.
-. scripts/lib/nix-bootstrap.sh
-ensure_nix_profile
-NIXOS_HOST_KEYS_DIR="$(pwd)/host-keys" nix build --impure \
-  --no-use-registries --no-accept-flake-config "${NIX_OPTS[@]}" \
-  ".#nixosConfigurations.${target}.config.system.build.tarball" \
-  --out-link "result-${target}"
-built="$(find "result-${target}/tarball" -maxdepth 1 -type f | head -1)"
-if [[ -z "$built" ]]; then
-  echo "ERROR: no tarball found under result-${target}/tarball after build." >&2
-  exit 1
-fi
-mkdir -p "$dest_dir"
-cp "$built" "${dest_dir}/${dest_name}"
-echo "Built and staged: ${dest_dir}/${dest_name}"
-REMOTE_SCRIPT
-      local_image="$remote_path"
-      echo "Built on ${node}: ${remote_path}"
     fi
   else
-    # PROXMOX_SSH_USER defaults to root (env.sh), which needs no sudo and
-    # can't assume it's even installed on a minimal node -- only shell out
-    # through sudo when actually running as a non-root SSH user.
-    sudo_prefix="sudo"
-    sudo_display="sudo "
-    if [[ "$PROXMOX_SSH_USER" == "root" ]]; then
-      sudo_prefix=""
-      sudo_display=""
-    fi
     if [[ "$dry_run" -eq 1 ]]; then
-      echo "[dry-run] would build on ${node}: nix build --no-use-registries --no-accept-flake-config${nix_opts_display} \\"
+      echo "[dry-run] would build: nix build --no-use-registries --no-accept-flake-config${nix_opts_display} \\"
       echo "[dry-run]   .#nixosConfigurations.${flake_target}.config.system.build.diskoImagesScript"
-      echo "[dry-run] would run:   ${sudo_display}./result-${flake_target} \\"
+      echo "[dry-run] would run:   sudo ./result-${flake_target} \\"
       echo "[dry-run]                --pre-format-files host-keys/${flake_target}_ssh_host_ed25519_key /etc/ssh/ssh_host_ed25519_key \\"
       echo "[dry-run]                --pre-format-files host-keys/${flake_target}_ssh_host_ed25519_key.pub /etc/ssh/ssh_host_ed25519_key.pub \\"
       echo "[dry-run]                --build-memory 2048"
-      echo "[dry-run] would stage the result at ${remote_path}"
       local_image="<built-image>.raw"
     else
-      echo "==> Building Disko image for ${flake_target} on ${node}..."
+      echo "==> Building Disko image script for ${flake_target}..."
-      # See the LXC branch above for why this is one %q-quoted command
+      nix build --no-use-registries --no-accept-flake-config "${NIX_OPTS[@]}" \
-      # string rather than separate ssh argv elements.
+        ".#nixosConfigurations.${flake_target}.config.system.build.diskoImagesScript" \
-      printf -v remote_cmd 'bash -s -- %q %q %q %q %q %q' \
+        --out-link "${repo_root}/result-${flake_target}"
-        "$remote_repo_dir" "$flake_target" "$remote_dir" "$remote_filename" "$NIX_EXTRA_OPTS" "$sudo_prefix"
+      echo "==> Running it (builds the .raw image in a temporary QEMU VM, needs sudo)..."
-      ssh "$ssh_target" "$remote_cmd" <<'REMOTE_SCRIPT'
+      ( cd "$repo_root" && sudo "./result-${flake_target}" \
-set -euo pipefail
+          --pre-format-files "host-keys/${flake_target}_ssh_host_ed25519_key" /etc/ssh/ssh_host_ed25519_key \
-repo_dir="$1"; target="$2"; dest_dir="$3"; dest_name="$4"; nix_extra_opts_str="$5"; sudo_prefix="$6"
+          --pre-format-files "host-keys/${flake_target}_ssh_host_ed25519_key.pub" /etc/ssh/ssh_host_ed25519_key.pub \
-declare -a NIX_OPTS=()
+          --build-memory 2048 )
-[[ -n "$nix_extra_opts_str" ]] && eval "NIX_OPTS=(${nix_extra_opts_str})"
+      local_image="$(find "$repo_root" -maxdepth 1 -name "*.raw" -newer "${repo_root}/result-${flake_target}" | head -1)"
-cd "$repo_dir"
+      if [[ -z "$local_image" ]]; then
-. scripts/lib/nix-bootstrap.sh
+        echo "ERROR: expected a .raw image after the build but didn't find one in ${repo_root}." >&2
-ensure_nix_profile
+        exit 1
-nix build --no-use-registries --no-accept-flake-config "${NIX_OPTS[@]}" \
+      fi
-  ".#nixosConfigurations.${target}.config.system.build.diskoImagesScript" \
+      echo "Built: ${local_image}"
-  --out-link "result-${target}"
-$sudo_prefix "./result-${target}" \
-  --pre-format-files "host-keys/${target}_ssh_host_ed25519_key" /etc/ssh/ssh_host_ed25519_key \
-  --pre-format-files "host-keys/${target}_ssh_host_ed25519_key.pub" /etc/ssh/ssh_host_ed25519_key.pub \
-  --build-memory 2048
-built="$(find . -maxdepth 1 -name '*.raw' -newer "result-${target}" | head -1)"
-if [[ -z "$built" ]]; then
-  echo "ERROR: no .raw image found in ${repo_dir} after build." >&2
-  exit 1
-fi
-mkdir -p "$dest_dir"
-mv "$built" "${dest_dir}/${dest_name}"
-echo "Built and staged: ${dest_dir}/${dest_name}"
-REMOTE_SCRIPT
-      local_image="$remote_path"
-      echo "Built on ${node}: ${remote_path}"
     fi
   fi
 fi
 
-# --- upload -- only for an explicit --image; a build above stages its
+# --- upload (skip entirely if reusing an image already on the node) ------
-# result directly at ${remote_path} on the node already, and reusing an
-# image already on the node needs nothing transferred either. ------------
 echo
-if [[ -n "$image" ]]; then
+if [[ "$image_already_remote" -eq 1 ]]; then
-  if [[ "$dry_run" -eq 1 ]]; then
+  : # nothing to upload
-    echo "[dry-run] would upload: scp ${local_image} ${ssh_target}:${remote_path}"
+elif [[ "$dry_run" -eq 1 ]]; then
-  else
+  echo "[dry-run] would upload: scp ${local_image} ${ssh_target}:${remote_path}"
-    echo "==> Uploading to ${node}:${remote_path}..."
+else
-    ssh "$ssh_target" "mkdir -p ${remote_dir}"
+  echo "==> Uploading to ${node}:${remote_path}..."
-    scp "$local_image" "${ssh_target}:${remote_path}"
+  ssh "$ssh_target" "mkdir -p ${remote_dir}"
-  fi
+  scp "$local_image" "${ssh_target}:${remote_path}"
 fi
 
 # --- create -----------------------------------------------------------------
@@ -780,32 +516,16 @@ if [[ "$type" == "lxc" ]]; then
   # systemd routinely uses (even plain getty units), and every getty
   # crash-loops on a denied mount every ~3s (visible as garbage on the
   # console) while core services like nsncd fail the same way.
-  #
+  create_cmd="pct create ${vmid} ${iso_storage}:vztmpl/${remote_filename} --unprivileged 1 --features ${PROXMOX_DEFAULT_LXC_FEATURES} --rootfs ${storage}:${local_disk_size} --hostname ${name} --cores ${cores} --memory ${memory} --swap ${local_swap} --net0 name=eth0,bridge=${bridge},ip=dhcp"
-  # ...,mount=nfs;nfs4: without it AppArmor blanket-denies the `nfs`/
-  # `rpc_pipefs` mount syscalls any NFS client share needs -- confirmed
-  # live on lxc-docker: `mount: /var/lib/nfs/rpc_pipefs: permission
-  # denied`. The value's `;` (Proxmox's own multi-fstype separator for
-  # this one feature, per PVE::LXC's use of PVE::ParseUtils::split_list)
-  # must stay single-quoted here: create_cmd is sent to `remote()`, which
-  # hands the whole string to `ssh` as a single command for the *remote*
-  # shell to parse -- unquoted, that `;` would be read as a remote
-  # command separator and silently truncate this into two commands.
-  create_cmd="pct create ${vmid} ${iso_storage}:vztmpl/${remote_filename} --unprivileged 1 --features '${PROXMOX_DEFAULT_LXC_FEATURES}' --rootfs ${storage}:${local_disk_size} --hostname ${name} --cores ${cores} --memory ${memory} --swap ${local_swap} --net0 name=eth0,bridge=${bridge},ip=dhcp"
   remote "$create_cmd"
   remote "pct start ${vmid}"
 else
   echo "==> Creating VM ${vmid} (${name})..."
   # pre-enrolled-keys=0 disables OVMF's Secure Boot key pre-enrollment --
   # required, or systemd-boot (unsigned) can't be trusted by the firmware.
-  # --agent 1: wires up the virtio-serial channel QEMU exposes to the guest.
-  # modules/common/configuration.nix sets services.qemuGuest.enable = true
-  # on every host, so the guest-side qemu-ga daemon is already running --
-  # without this flag Proxmox never creates the channel it listens on, so
-  # `qm guest exec`/`qm agent` and the UI's IP-address display silently
-  # never work for any VM this script creates.
   remote "qm create ${vmid} --name ${name} --memory ${memory} --cores ${cores} \
 --net0 virtio,bridge=${bridge} --bios ovmf --machine q35 --scsihw virtio-scsi-pci \
---efidisk0 ${storage}:1,efitype=4m,pre-enrolled-keys=0 --agent enabled=1"
+--efidisk0 ${storage}:1,efitype=4m,pre-enrolled-keys=0"
 
   if [[ "$dry_run" -eq 1 ]]; then
     echo "[dry-run] ssh ${ssh_target} -- qm importdisk ${vmid} ${remote_path} ${storage}"

scripts/env.sh

@@ -3,10 +3,10 @@
 # second copy of these values in every script:
 #   source "$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)/env.sh"
 # Every variable can still be overridden per-invocation via the
-# environment (e.g. PROXMOX_STORAGE=tank-nvme ./scripts/proxmox/create-proxmox-resource.sh ...)
+# environment (e.g. PROXMOX_STORAGE=tank-nvme ./scripts/create-proxmox-resource.sh ...)
 # since each one only sets a default if unset.
 
-# SSH-reachable Proxmox node that scripts/proxmox/create-proxmox-resource.sh runs
+# SSH-reachable Proxmox node that scripts/create-proxmox-resource.sh runs
 # pct/qm on. Matches the Proxmox web UI hostname already used in
 # hosts/nixos/home.nix's desktop shortcuts (pve.<homeDomain> from
 # variables.nix) -- change this if that's not actually reachable over SSH,
@@ -14,14 +14,6 @@
 : "${PROXMOX_HOST:=pve.sweet.home}"
 : "${PROXMOX_SSH_USER:=root}"
 
-# Where this flake repo lives on the Proxmox node itself.
-# scripts/proxmox/create-proxmox-resource.sh builds images directly on the node
-# instead of transferring them over the network -- it clones the repo here
-# (from this checkout's own `origin` remote) the first time it doesn't
-# find it, installing build tooling via scripts/codex-setup.sh, then
-# `git pull`s it before every subsequent build.
-: "${PROXMOX_REMOTE_REPO_DIR:=/root/nixos}"
-
 # Storage pool names -- Proxmox's own stock-install defaults, but this
 # varies a lot by setup (ZFS pool name, custom LVM-thin volume, etc.).
 # Verify with `pvesm status` on the node and correct these if wrong.
@@ -53,20 +45,11 @@
 # crash-loops on a denied `/run/credentials/*` mount every ~3s (visible
 # as garbage on the console) and core services like nsncd fail the same
 # way on userns_create; system.build.tarball never finishes activating.
-#
+: "${PROXMOX_DEFAULT_LXC_FEATURES:=nesting=1,keyctl=1}"
-# mount=nfs;nfs4: without it, AppArmor blanket-denies the `nfs`/
-# `rpc_pipefs` mount syscalls any NFS client share needs -- confirmed
-# live on lxc-docker (which mounts several, see modules/docker/mount-data.nix
-# and modules/raspi/mount-data.nix): `mount: /var/lib/nfs/rpc_pipefs:
-# permission denied`. Harmless to grant on lxc targets that don't mount
-# NFS at all -- it only widens what the container is *allowed* to mount,
-# nothing here forces a mount to happen.
-: "${PROXMOX_DEFAULT_LXC_FEATURES:=nesting=1,keyctl=1,mount=nfs;nfs4}"
 
 export PROXMOX_HOST PROXMOX_SSH_USER PROXMOX_STORAGE PROXMOX_ISO_STORAGE \
   PROXMOX_BRIDGE PROXMOX_DEFAULT_CORES PROXMOX_DEFAULT_MEMORY_MB \
-  PROXMOX_DEFAULT_LXC_DISK_GB PROXMOX_DEFAULT_LXC_FEATURES \
+  PROXMOX_DEFAULT_LXC_DISK_GB PROXMOX_DEFAULT_LXC_FEATURES
-  PROXMOX_REMOTE_REPO_DIR
 
 # Matches variables.nix's nixCacheHost -- update both if it ever changes.
 : "${NIX_CACHE_HOST:=nix-cache}"

scripts/lib/confirm.sh

@@ -1,21 +0,0 @@
-#!/usr/bin/env bash
-# Shared "type X to confirm" prompt for scripts/proxmox/create-proxmox-resource.sh
-# (--modify, and replacing an existing --allow-duplicate-host resource) and
-# scripts/secrets/sync-host-keys.sh (--regenerate-all-keys) -- three destructive
-# confirmations that all work the same way (echo the expected value back
-# exactly), kept in one place so the prompt/comparison logic can't drift.
-# Source alongside env.sh:
-#   source "$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)/lib/confirm.sh"
-#
-# Deliberately does NOT print anything on mismatch or decide exit-vs-return
-# -- callers vary on both (a top-level script exits, a subcommand function
-# returns; wording differs too), so that stays at the call site.
-
-# confirm_typed <expected> <prompt>
-# Prints <prompt> via `read -rp`, then reports (via exit status) whether the
-# typed input matched <expected> exactly.
-confirm_typed() {
-  local expected="$1" prompt="$2" input
-  read -rp "$prompt" input
-  [[ "$input" == "$expected" ]]
-}

scripts/lib/nix-bootstrap.sh

@@ -1,20 +0,0 @@
-#!/usr/bin/env bash
-# Shared Nix bootstrap for scripts/codex-setup.sh and
-# scripts/codex-maintenance.sh: the nix.conf settings both need in effect
-# before a single `nix` command runs (flakes enabled, never honor a flake
-# input's own nixConfig, no "dirty tree" warning spam), plus a helper to
-# pull an already-installed Nix's daemon/profile script onto PATH if it
-# isn't there yet. Source this instead of copying it -- see CLAUDE.md.
-export NIX_CONFIG="${NIX_CONFIG:-}
-experimental-features = nix-command flakes
-accept-flake-config = false
-warn-dirty = false
-"
-
-ensure_nix_profile() {
-  if [ -f /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh ]; then
-    . /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh
-  elif [ -f "$HOME/.nix-profile/etc/profile.d/nix.sh" ]; then
-    . "$HOME/.nix-profile/etc/profile.d/nix.sh"
-  fi
-}

scripts/lib/nix-eval.sh

@@ -1,36 +0,0 @@
-#!/usr/bin/env bash
-# Shared flake-introspection helpers for scripts/*.sh. Source alongside
-# env.sh:
-#   source "$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)/lib/nix-eval.sh"
-#
-# NIX_EVAL_FLAGS: --no-use-registries so a call here never resolves through
-# the user's global flake registry (every call targets this repo's own
-# flake, or an explicit github: ref, not a registry alias); --no-accept-flake-config
-# so a flake input's own nixConfig (e.g. a dependency's substituters) is
-# never honored -- matches accept-flake-config = false already set repo-wide
-# (see lib/nix-bootstrap.sh / CLAUDE.md). Reuse this array rather than
-# retyping the two flags at each call site.
-declare -a NIX_EVAL_FLAGS=(--no-use-registries --no-accept-flake-config)
-
-# list_flake_targets <flake_ref>
-# Prints the attribute names under <flake_ref>#nixosConfigurations, one per
-# line, e.g.:
-#   list_flake_targets .            # from inside the repo
-#   list_flake_targets "$repo_root" # from anywhere
-list_flake_targets() {
-  local flake_ref="$1"
-  nix eval --json "${NIX_EVAL_FLAGS[@]}" \
-    "${flake_ref}#nixosConfigurations" --apply builtins.attrNames \
-  | jq -r '.[]'
-}
-
-# flake_target_hostname <flake_ref> <target>
-# Prints one nixosConfigurations target's config.networking.hostName.
-# Empty (not an error under set -e) if the target doesn't exist or the
-# eval otherwise fails -- callers that need to distinguish "empty" from
-# "eval failed" should check $? themselves instead of relying on this.
-flake_target_hostname() {
-  local flake_ref="$1" target="$2"
-  nix eval --raw "${NIX_EVAL_FLAGS[@]}" \
-    "${flake_ref}#nixosConfigurations.${target}.config.networking.hostName" 2>/dev/null
-}

scripts/lib/sops-age.sh

@@ -1,52 +0,0 @@
-#!/usr/bin/env bash
-# Shared sops/age helpers for scripts/secrets/backup-admin-key.sh,
-# scripts/secrets/rotate-admin-key.sh, and scripts/secrets/sync-host-keys.sh -- all three
-# derive an age public key from a private identity file the same way, two
-# of them resolve the same sops/age default key-file path, and two of them
-# run `sops updatekeys` the same way. Kept in one place so they can't drift
-# apart. Source alongside env.sh:
-#   source "$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)/lib/sops-age.sh"
-#
-# Uses NIX_OPTS (an array of extra `nix-shell` options -- see env.sh's
-# nix_extra_opts) if the caller has already set it, same convention as
-# lib/ssh-host-keys.sh. Falls back to no extra options if the caller never
-# sourced env.sh.
-if ! declare -p NIX_OPTS >/dev/null 2>&1; then
-  declare -a NIX_OPTS=()
-fi
-
-# sops/age's own default identity-file resolution order, minus $SOPS_AGE_KEY
-# itself (an inline identity, not a path -- callers that accept it check it
-# separately, before falling back to this).
-: "${DEFAULT_SOPS_AGE_KEY_FILE:=${SOPS_AGE_KEY_FILE:-${XDG_CONFIG_HOME:-$HOME/.config}/sops/age/keys.txt}}"
-
-# age_pubkey_from_identity_file <identity-file>
-# Prints the age public key for a private identity file (age-keygen -y).
-age_pubkey_from_identity_file() {
-  local identity_file="$1"
-  nix-shell "${NIX_OPTS[@]}" -p age --run "age-keygen -y '${identity_file}'"
-}
-
-# sops_yaml_admin_pubkey <sops-yaml-path>
-# Prints .sops.yaml's current &admin age public key, or empty (not an error
-# under set -e) if no such anchor line exists -- callers that need to treat
-# "missing" as fatal check for an empty result themselves.
-sops_yaml_admin_pubkey() {
-  local sops_yaml="$1"
-  grep -E '^  - &admin age1' "$sops_yaml" 2>/dev/null | awk '{print $NF}' || true
-}
-
-# sops_updatekeys <secrets-file> [key-file]
-# Re-encrypts <secrets-file> for .sops.yaml's current recipient set. If
-# <key-file> is given, decrypts with that identity (SOPS_AGE_KEY_FILE)
-# instead of whatever's ambient -- needed when the ambient default key
-# doesn't match yet (e.g. mid-rotation, decrypting with the outgoing key).
-sops_updatekeys() {
-  local secrets_file="$1" key_file="${2:-}"
-  if [[ -n "$key_file" ]]; then
-    SOPS_AGE_KEY_FILE="$key_file" nix-shell "${NIX_OPTS[@]}" -p sops --run \
-      "sops updatekeys --yes '${secrets_file}'"
-  else
-    nix-shell "${NIX_OPTS[@]}" -p sops --run "sops updatekeys --yes '${secrets_file}'"
-  fi
-}

scripts/lib/ssh-host-keys.sh

@@ -1,30 +0,0 @@
-#!/usr/bin/env bash
-# Shared SSH-host-key / age-conversion helpers for scripts/secrets/sync-host-keys.sh
-# and scripts/secrets/prepare-host-key.sh -- both generate the same kind of key
-# (ed25519, no passphrase, the sops-nix age-derivation input) and convert it
-# to an age recipient the same way; kept in one place so the two can't
-# drift apart.
-#
-# Uses NIX_OPTS (an array of extra `nix-shell` options -- see env.sh's
-# nix_extra_opts) if the caller has already set it, so a decision to avoid
-# an unreachable nix-cache is reused here instead of probed again. Falls
-# back to no extra options if the caller never sourced env.sh.
-if ! declare -p NIX_OPTS >/dev/null 2>&1; then
-  declare -a NIX_OPTS=()
-fi
-
-# generate_host_ed25519_key <hostname> <keyfile>
-# Writes <keyfile> and <keyfile>.pub. Caller is responsible for refusing to
-# overwrite an existing keyfile -- this always runs ssh-keygen fresh.
-generate_host_ed25519_key() {
-  local hostname="$1" keyfile="$2"
-  nix-shell "${NIX_OPTS[@]}" -p openssh --run \
-    "ssh-keygen -t ed25519 -N '' -C '${hostname}' -f '${keyfile}'" >/dev/null
-}
-
-# ssh_pubkey_to_age <pubkeyfile>
-# Prints the age public key derived from an ed25519 SSH public key file.
-ssh_pubkey_to_age() {
-  local pubkeyfile="$1"
-  nix-shell "${NIX_OPTS[@]}" -p ssh-to-age --run "ssh-to-age -i '${pubkeyfile}'"
-}

scripts/prepare-host-key.sh

@@ -2,7 +2,7 @@
 # Generates a new machine's SSH host key by an arbitrary name, before it
 # necessarily has a flake target yet -- prints the .sops.yaml snippet to
 # add by hand. For any host that already has a flake target,
-# scripts/secrets/sync-host-keys.sh <target> does this same job plus the
+# scripts/sync-host-keys.sh <target> does this same job plus the
 # .sops.yaml/key_groups registration and re-encryption automatically; use
 # this script only to pre-generate a key ahead of adding the flake target
 # itself.
@@ -22,13 +22,9 @@
 # new machine.
 set -euo pipefail
 
-repo_root="$(cd "$(dirname "$0")/../.." && pwd)"
+repo_root="$(cd "$(dirname "$0")/.." && pwd)"
-# shellcheck source=../env.sh
-source "${repo_root}/scripts/env.sh"
-# shellcheck source=../lib/ssh-host-keys.sh
-source "${repo_root}/scripts/lib/ssh-host-keys.sh"
 
-hostname="${1:?usage: scripts/secrets/prepare-host-key.sh <hostname>}"
+hostname="${1:?usage: scripts/prepare-host-key.sh <hostname>}"
 sops_yaml="${repo_root}/.sops.yaml"
 
 if [[ ! -f "$sops_yaml" ]]; then
@@ -45,10 +41,9 @@ if [[ -f "$keyfile" ]]; then
   exit 1
 fi
 
-nix_extra_opts
+nix-shell -p openssh --run "ssh-keygen -t ed25519 -N '' -C '${hostname}' -f '${keyfile}'" >/dev/null
-generate_host_ed25519_key "$hostname" "$keyfile"
 
-age_pub="$(ssh_pubkey_to_age "${keyfile}.pub")"
+age_pub="$(nix-shell -p ssh-to-age --run "ssh-to-age -i '${keyfile}.pub'")"
 
 cat <<EOF
 

scripts/proxmox/configure-nix-cache-client.sh

@@ -1,182 +0,0 @@
-#!/usr/bin/env bash
-# Points a non-NixOS Debian machine's Nix install at nix-cache: adds it as
-# a substituter (with cache.nixos.org kept as fallback) and, once the
-# remote-builder private key is installed, as a distributed-build machine
-# too.
-#
-# This is the non-NixOS equivalent of modules/nix-cache/client.nix +
-# modules/nix-cache/remote-builder-client.nix -- those two only apply to
-# hosts built from this flake. A plain Debian box with Nix installed
-# (single- or multi-user install, nix-daemon running) has no NixOS module
-# system to pick that config up, so this edits /etc/nix/nix.conf by hand
-# instead. Run this ON the target Debian machine, as root.
-#
-# The values below mirror variables.nix / modules/nix-cache/client.nix in
-# this repo -- update both if nix-cache is ever rebuilt with a new host
-# key or the cache signing key is rotated (see docs/nix-cache.md).
-#
-# REMOTE_BUILDER_KEY defaults to this machine's own default root SSH
-# identity (matches modules/nix-cache/remote-builder-client.nix's
-# convention for real NixOS clients: authenticate as nixremote with the
-# host's own default key, added individually to
-# vars.remoteBuilderAuthorizedKeys, rather than a separately-named or
-# shared keypair) -- generate one with
-# `ssh-keygen -t ed25519 -N '' -f /root/.ssh/id_ed25519` if this machine
-# doesn't have one yet, then add its .pub to vars.remoteBuilderAuthorizedKeys
-# and rebuild nix-cache.
-#
-# Usage:
-#   sudo ./configure-nix-cache-client.sh [--dry-run] [--no-remote-builder] [--no-restart]
-#
-# Env overrides (defaults match variables.nix):
-#   NIX_CACHE_HOST, NIX_CACHE_HOST_KEY, REMOTE_BUILDER_USER, REMOTE_BUILDER_KEY
-
-set -euo pipefail
-
-: "${NIX_CACHE_HOST:=nix-cache}"
-: "${NIX_CACHE_HOST_KEY:=ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPeWgMsdaiz4axT/deFc1+0B5bN+GX/NOeW9bbQ0c/IT lxc-nix-cache}"
-: "${REMOTE_BUILDER_USER:=nixremote}"
-: "${REMOTE_BUILDER_KEY:=/root/.ssh/id_ed25519}"
-
-CACHE_PUB_KEY="cache.local-1:usoWYanY3Kpq2+kDIS2nhWoLZiRxanmdysdzqCFBHW4="
-FALLBACK_URL="https://cache.nixos.org/"
-FALLBACK_PUB_KEY="cache.nixos.org-1:6NCHdD59X431o0gWypbMrAURkbJ16ZPMQFGspcDShjY="
-
-NIX_CONF="/etc/nix/nix.conf"
-KNOWN_HOSTS="/etc/ssh/ssh_known_hosts"
-MARKER_BEGIN="# BEGIN nix-cache client config (configure-nix-cache-client.sh)"
-MARKER_END="# END nix-cache client config"
-
-dry_run=0
-with_remote_builder=1
-restart_daemon=1
-
-for arg in "$@"; do
-  case "$arg" in
-    --dry-run) dry_run=1 ;;
-    --no-remote-builder) with_remote_builder=0 ;;
-    --no-restart) restart_daemon=0 ;;
-    -h|--help)
-      sed -n '2,20p' "$0"
-      exit 0
-      ;;
-    *)
-      echo "ERROR: unknown argument: $arg" >&2
-      exit 1
-      ;;
-  esac
-done
-
-if [[ "$dry_run" -eq 0 && "$EUID" -ne 0 ]]; then
-  echo "ERROR: must run as root (writes $NIX_CONF and, unless --no-remote-builder, $KNOWN_HOSTS)." >&2
-  exit 1
-fi
-
-if ! command -v nix >/dev/null 2>&1; then
-  echo "ERROR: no 'nix' binary on PATH -- install the Nix package manager first." >&2
-  exit 1
-fi
-
-if [[ ! -f "$NIX_CONF" ]]; then
-  echo "ERROR: $NIX_CONF not found -- expected an existing multi-user Nix install." >&2
-  exit 1
-fi
-
-builder_line=""
-if [[ "$with_remote_builder" -eq 1 ]]; then
-  if [[ -f "$REMOTE_BUILDER_KEY" ]]; then
-    case "$(uname -m)" in
-      x86_64) nix_system="x86_64-linux" ;;
-      aarch64) nix_system="aarch64-linux" ;;
-      *)
-        echo "WARNING: unrecognized architecture '$(uname -m)' -- skipping remote builder, keeping substituter config." >&2
-        with_remote_builder=0
-        ;;
-    esac
-    if [[ "$with_remote_builder" -eq 1 ]]; then
-      builder_line="builders = ssh://${REMOTE_BUILDER_USER}@${NIX_CACHE_HOST} ${nix_system} ${REMOTE_BUILDER_KEY} 4 2 big-parallel,kvm,nixos-test,benchmark"
-    fi
-  else
-    echo "WARNING: $REMOTE_BUILDER_KEY not found -- skipping remote builder config (substituter still configured)." >&2
-    echo "  See docs/nix-cache.md 'Remote builder SSH keys' for how to install it, then re-run this script." >&2
-    with_remote_builder=0
-  fi
-fi
-
-block="$(cat <<EOF
-$MARKER_BEGIN
-extra-substituters = http://${NIX_CACHE_HOST} ${FALLBACK_URL}
-extra-trusted-public-keys = ${CACHE_PUB_KEY} ${FALLBACK_PUB_KEY}
-EOF
-)"
-if [[ "$with_remote_builder" -eq 1 ]]; then
-  block="${block}
-builders-use-substitutes = true
-${builder_line}"
-fi
-block="${block}
-$MARKER_END"
-
-echo "== nix.conf block to install =="
-echo "$block"
-echo "================================"
-
-if [[ "$dry_run" -eq 1 ]]; then
-  echo "(--dry-run: not writing $NIX_CONF)"
-else
-  tmp_conf="$(mktemp)"
-  trap 'rm -f "$tmp_conf"' EXIT
-
-  if grep -qF "$MARKER_BEGIN" "$NIX_CONF"; then
-    awk -v begin="$MARKER_BEGIN" -v end="$MARKER_END" -v block="$block" '
-      $0 == begin { print block; skip = 1; next }
-      $0 == end   { skip = 0; next }
-      skip        { next }
-      { print }
-    ' "$NIX_CONF" > "$tmp_conf"
-  else
-    cp "$NIX_CONF" "$tmp_conf"
-    printf '\n%s\n' "$block" >> "$tmp_conf"
-  fi
-
-  cp "$NIX_CONF" "${NIX_CONF}.bak.$(date +%Y%m%d%H%M%S)"
-  install -m 0644 "$tmp_conf" "$NIX_CONF"
-  echo "Updated $NIX_CONF (backup saved alongside it)."
-fi
-
-if [[ "$with_remote_builder" -eq 1 ]]; then
-  known_hosts_line="${NIX_CACHE_HOST} ${NIX_CACHE_HOST_KEY}"
-  if [[ "$dry_run" -eq 1 ]]; then
-    echo "(--dry-run: would ensure this line is present in $KNOWN_HOSTS)"
-    echo "  $known_hosts_line"
-  else
-    mkdir -p "$(dirname "$KNOWN_HOSTS")"
-    touch "$KNOWN_HOSTS"
-    if ! grep -qF "$known_hosts_line" "$KNOWN_HOSTS" 2>/dev/null; then
-      echo "$known_hosts_line" >> "$KNOWN_HOSTS"
-      echo "Added nix-cache's SSH host key to $KNOWN_HOSTS."
-    fi
-  fi
-fi
-
-if [[ "$dry_run" -eq 0 && "$restart_daemon" -eq 1 ]]; then
-  if command -v systemctl >/dev/null 2>&1 && systemctl is-active --quiet nix-daemon 2>/dev/null; then
-    systemctl restart nix-daemon
-    echo "Restarted nix-daemon to pick up the new config."
-  else
-    echo "nix-daemon not managed by systemd (or not running) -- restart it manually to pick up the new config."
-  fi
-fi
-
-cat <<EOF
-
-Done. Verify with:
-  curl http://${NIX_CACHE_HOST}/nix-cache-info
-  nix show-config | grep -E 'substituters|trusted-public-keys|builders'
-EOF
-if [[ "$with_remote_builder" -eq 1 ]]; then
-  cat <<EOF
-  ssh -i ${REMOTE_BUILDER_KEY} ${REMOTE_BUILDER_USER}@${NIX_CACHE_HOST} nix-store --version
-  nix build nixpkgs#hello -L
-EOF
-fi

scripts/secrets/backup-admin-key.sh

@@ -1,150 +0,0 @@
-#!/usr/bin/env bash
-# Backs up the local sops age key (the private key that decrypts
-# secrets/*.yaml -- normally the one trusted as &admin) to an arbitrary
-# destination path, e.g. a USB drive or other offline storage, so it can
-# later be restored and handed to rotate-admin-key.sh if this machine's
-# copy is ever lost, or to run either script from a different machine.
-#
-# Usage:
-#   scripts/secrets/backup-admin-key.sh <dest-path> [--key-file <path>] [--force] [--dry-run]
-#
-# Source key resolution matches sops/age's own default order:
-#   $SOPS_AGE_KEY (inline identity text) if set, else
-#   --key-file if given, else
-#   $SOPS_AGE_KEY_FILE if set, else
-#   ${XDG_CONFIG_HOME:-$HOME/.config}/sops/age/keys.txt
-set -euo pipefail
-
-repo_root="$(cd "$(dirname "$0")/../.." && pwd)"
-sops_yaml="${repo_root}/.sops.yaml"
-
-# shellcheck source=../env.sh
-source "${repo_root}/scripts/env.sh"
-# shellcheck source=../lib/sops-age.sh
-source "${repo_root}/scripts/lib/sops-age.sh"
-
-# Pin cwd for the same reason rotate-admin-key.sh does: age/sops calls
-# below should never depend on wherever the caller's shell happened to be.
-cd "$repo_root"
-
-usage() {
-  cat <<EOF
-Usage: $0 <dest-path> [--key-file <path>] [--force] [--dry-run]
-
-  <dest-path>        Where to write the backup. Parent directories are
-                     created as needed. Written with 0600 permissions.
-  --key-file <path>  Read the key from here instead of the default
-                     sops/age resolution (\$SOPS_AGE_KEY_FILE, then
-                     \${XDG_CONFIG_HOME:-\$HOME/.config}/sops/age/keys.txt).
-                     Ignored if \$SOPS_AGE_KEY is set (that always wins,
-                     same precedence sops/age itself uses).
-  --force            Overwrite <dest-path> if it already exists.
-  --dry-run          Print what would happen; write nothing.
-EOF
-}
-
-dry_run=0
-force=0
-key_file="$DEFAULT_SOPS_AGE_KEY_FILE"
-args=()
-
-while [[ $# -gt 0 ]]; do
-  case "$1" in
-    --dry-run)
-      dry_run=1
-      shift
-      ;;
-    --force)
-      force=1
-      shift
-      ;;
-    --key-file)
-      key_file="${2:?--key-file requires a path}"
-      shift 2
-      ;;
-    -h | --help)
-      usage
-      exit 0
-      ;;
-    --*)
-      echo "Unknown option: $1" >&2
-      usage >&2
-      exit 1
-      ;;
-    *)
-      args+=("$1")
-      shift
-      ;;
-  esac
-done
-
-if [[ "${#args[@]}" -ne 1 ]]; then
-  usage >&2
-  exit 1
-fi
-dest="${args[0]}"
-
-nix_extra_opts
-
-if [[ -n "${SOPS_AGE_KEY:-}" ]]; then
-  echo "==> Source: \$SOPS_AGE_KEY (inline identity from the environment)."
-  src_content="$SOPS_AGE_KEY"
-else
-  [[ -s "$key_file" ]] || {
-    echo "ERROR: no key found. \$SOPS_AGE_KEY is unset and ${key_file} doesn't exist or is empty." >&2
-    exit 1
-  }
-  echo "==> Source: ${key_file}"
-  src_content="$(cat "$key_file")"
-fi
-
-# Round-trip through a private scratch file (rather than trusting the
-# source string as-is) so age-keygen -y validates it's a real identity
-# before anything is written to <dest-path>.
-scratch="$(mktemp)"
-trap 'rm -f "$scratch"' EXIT
-( umask 077; printf '%s\n' "$src_content" > "$scratch" )
-
-src_pub="$(age_pubkey_from_identity_file "$scratch")" || {
-  echo "ERROR: source doesn't look like a valid age identity (age-keygen -y failed)." >&2
-  exit 1
-}
-echo "    public key: ${src_pub}"
-
-current_admin_pub="$(sops_yaml_admin_pubkey "$sops_yaml")"
-if [[ -n "$current_admin_pub" && "$current_admin_pub" != "$src_pub" ]]; then
-  echo "NOTE: this key does not match .sops.yaml's current &admin entry (${current_admin_pub})."
-  echo "      Backing it up anyway -- this script doesn't require it to be the admin key."
-fi
-
-if [[ -e "$dest" && "$force" -ne 1 ]]; then
-  echo "ERROR: ${dest} already exists. Pass --force to overwrite." >&2
-  exit 1
-fi
-
-if [[ "$dry_run" -eq 1 ]]; then
-  echo
-  echo "[dry-run] would write $(wc -c <"$scratch" | tr -d ' ') bytes to ${dest} (mode 0600)"
-  [[ -e "$dest" ]] && echo "[dry-run] would overwrite existing file (--force given)"
-  echo "[dry-run] Nothing was written. Re-run without --dry-run to apply this."
-  exit 0
-fi
-
-mkdir -p "$(dirname "$dest")"
-install -m 600 "$scratch" "$dest"
-
-dest_pub="$(age_pubkey_from_identity_file "$dest")"
-if [[ "$dest_pub" != "$src_pub" ]]; then
-  echo "ERROR: ${dest} was written but its public key doesn't match the source -- investigate before relying on this backup." >&2
-  exit 1
-fi
-
-cat <<EOF
-
-Done. Backed up to: ${dest}
-  public key: ${dest_pub}
-
-This is a private key -- store it somewhere offline/secure, not in this
-repo or anywhere it'd get committed. Restore it with:
-  scripts/secrets/rotate-admin-key.sh ${dest}
-EOF

scripts/secrets/rotate-admin-key.sh

@@ -1,193 +0,0 @@
-#!/usr/bin/env bash
-# Rotates the &admin sops age key: decrypts with a backed-up copy of the
-# key CURRENTLY trusted as &admin, replaces .sops.yaml's &admin entry with
-# a new key already present in this environment, and re-encrypts every
-# secrets/*.yaml for the new recipient set. After this runs, the old key
-# can no longer decrypt anything -- this is a real, one-way handoff of
-# trust, not a preview.
-#
-# This is the automation for the manual steps create-proxmox-resource.sh /
-# sync-host-keys.sh print when they bootstrap a brand-new, not-yet-trusted
-# age key on a machine that's never had admin access before:
-#
-#   scripts/secrets/rotate-admin-key.sh /path/to/backed-up/admin/keys.txt
-#
-# The backup key's *public* key must match .sops.yaml's current &admin
-# entry -- this script verifies that by deriving it, it doesn't just trust
-# the filename or take it on faith. The new key defaults to wherever sops
-# itself would already look ($SOPS_AGE_KEY_FILE, then the XDG default), so
-# the common case is just pointing this at the restored backup.
-set -euo pipefail
-
-repo_root="$(cd "$(dirname "$0")/../.." && pwd)"
-sops_yaml="${repo_root}/.sops.yaml"
-
-# shellcheck source=../env.sh
-source "${repo_root}/scripts/env.sh"
-# shellcheck source=../lib/sops-age.sh
-source "${repo_root}/scripts/lib/sops-age.sh"
-
-# sops resolves .sops.yaml by walking up from the process's cwd, not from
-# the target file's own path -- if this script were invoked from somewhere
-# other than the repo root (or from inside another checkout/worktree that
-# happens to have its own .sops.yaml), `sops updatekeys` would silently
-# re-encrypt against the WRONG config's recipient list instead of this
-# repo's. Pin cwd here so every sops/age call below is unambiguous
-# regardless of where the caller's shell started out.
-cd "$repo_root"
-
-usage() {
-  cat <<EOF
-Usage: $0 <path-to-backed-up-admin-key> [--new-key-file <path>] [--dry-run]
-
-  <path-to-backed-up-admin-key>  age identity file for the key CURRENTLY
-                                 trusted as &admin. Only ever read -- never
-                                 copied or modified.
-  --new-key-file <path>          age identity file for the key to promote
-                                 to &admin. Defaults to \$SOPS_AGE_KEY_FILE,
-                                 then
-                                 \${XDG_CONFIG_HOME:-\$HOME/.config}/sops/age/keys.txt
-                                 (sops/age's own default resolution order).
-  --dry-run                      Print what would change; touches nothing
-                                  (.sops.yaml untouched, no sops updatekeys
-                                  calls).
-EOF
-}
-
-dry_run=0
-new_key_file="$DEFAULT_SOPS_AGE_KEY_FILE"
-args=()
-
-while [[ $# -gt 0 ]]; do
-  case "$1" in
-    --dry-run)
-      dry_run=1
-      shift
-      ;;
-    --new-key-file)
-      new_key_file="${2:?--new-key-file requires a path}"
-      shift 2
-      ;;
-    -h | --help)
-      usage
-      exit 0
-      ;;
-    --*)
-      echo "Unknown option: $1" >&2
-      usage >&2
-      exit 1
-      ;;
-    *)
-      args+=("$1")
-      shift
-      ;;
-  esac
-done
-
-if [[ "${#args[@]}" -ne 1 ]]; then
-  usage >&2
-  exit 1
-fi
-backup_key="${args[0]}"
-
-[[ -s "$backup_key" ]] || { echo "ERROR: backup key file not found or empty: ${backup_key}" >&2; exit 1; }
-[[ -s "$new_key_file" ]] || { echo "ERROR: new key file not found or empty: ${new_key_file}" >&2; exit 1; }
-
-nix_extra_opts
-
-echo "==> Deriving public keys..."
-old_pub="$(age_pubkey_from_identity_file "$backup_key")"
-new_pub="$(age_pubkey_from_identity_file "$new_key_file")"
-echo "    backup (old admin) key: ${old_pub}"
-echo "    new admin key:          ${new_pub}"
-
-if [[ "$old_pub" == "$new_pub" ]]; then
-  echo "ERROR: backup key and new key are identical -- nothing to rotate." >&2
-  exit 1
-fi
-
-current_admin_pub="$(sops_yaml_admin_pubkey "$sops_yaml")"
-if [[ -z "$current_admin_pub" ]]; then
-  echo "ERROR: couldn't find a '&admin age1...' line in ${sops_yaml}." >&2
-  exit 1
-fi
-
-if [[ "$current_admin_pub" != "$old_pub" ]]; then
-  echo "ERROR: ${backup_key} doesn't match the current &admin key in .sops.yaml." >&2
-  echo "  .sops.yaml &admin: ${current_admin_pub}" >&2
-  echo "  backup key pubkey: ${old_pub}" >&2
-  echo "Wrong backup file, or .sops.yaml has already moved on -- not touching anything." >&2
-  exit 1
-fi
-
-mapfile -t secrets_files < <(find "${repo_root}/secrets" -maxdepth 1 -name '*.yaml' | sort)
-if [[ "${#secrets_files[@]}" -eq 0 ]]; then
-  echo "ERROR: no secrets/*.yaml files found under ${repo_root}/secrets." >&2
-  exit 1
-fi
-
-# sops_can_decrypt <key-file> <secrets-file>: used both to confirm the
-# backup key still works before touching anything, and again after
-# rotation to confirm the new key does too.
-sops_can_decrypt() {
-  local key_file="$1" secrets_file="$2"
-  SOPS_AGE_KEY_FILE="$key_file" nix-shell "${NIX_OPTS[@]}" -p sops --run \
-    "sops -d '${secrets_file}'" >/dev/null
-}
-
-echo "==> Confirming the backup key can actually decrypt..."
-if ! sops_can_decrypt "$backup_key" "${secrets_files[0]}"; then
-  echo "ERROR: backup key failed to decrypt $(basename "${secrets_files[0]}") -- aborting." >&2
-  exit 1
-fi
-echo "    OK: decrypted $(basename "${secrets_files[0]}")"
-
-if [[ "$dry_run" -eq 1 ]]; then
-  echo
-  echo "[dry-run] would replace .sops.yaml's &admin line:"
-  echo "[dry-run]   - ${current_admin_pub}"
-  echo "[dry-run]   + ${new_pub}"
-  echo "[dry-run] would then re-encrypt (sops updatekeys --yes) for the new recipient set:"
-  for f in "${secrets_files[@]}"; do
-    echo "[dry-run]   secrets/$(basename "$f")"
-  done
-  echo
-  echo "[dry-run] Nothing was changed. Re-run without --dry-run to apply this."
-  exit 0
-fi
-
-echo "==> Rotating .sops.yaml's &admin key..."
-sed -i "s|^  - &admin age1[a-z0-9]*|  - \&admin ${new_pub}|" "$sops_yaml"
-grep -qF "$new_pub" "$sops_yaml" || {
-  echo "ERROR: sed edit didn't take -- .sops.yaml left unchanged, check it by hand." >&2
-  exit 1
-}
-echo "    Updated."
-
-echo "==> Re-encrypting secrets/*.yaml for the new recipient set..."
-for f in "${secrets_files[@]}"; do
-  echo "==> $(basename "$f")"
-  sops_updatekeys "$f" "$backup_key"
-done
-
-echo "==> Verifying the new key can decrypt everything..."
-for f in "${secrets_files[@]}"; do
-  if ! sops_can_decrypt "$new_key_file" "$f"; then
-    echo "ERROR: new key failed to decrypt $(basename "$f") after rotation -- investigate before committing." >&2
-    exit 1
-  fi
-  echo "    OK: $(basename "$f")"
-done
-
-cat <<EOF
-
-Done. .sops.yaml's &admin key is now:
-  ${new_pub}
-
-The old key (${old_pub}) can no longer decrypt any secrets/*.yaml
-re-encrypted above.
-
-Review the diff, then commit:
-  git add .sops.yaml secrets/*.yaml
-  git commit -m "Rotate sops admin age key"
-EOF

scripts/secrets/sync-nix-cache-host-key.sh

@@ -1,110 +0,0 @@
-#!/usr/bin/env bash
-# Detects and fixes drift between the ed25519 SSH host key nix-cache is
-# actually serving right now and vars.nixCacheHostKey (variables.nix) --
-# the value modules/nix-cache/remote-builder-client.nix bakes into every
-# client's declarative programs.ssh.knownHosts, and
-# scripts/proxmox/configure-nix-cache-client.sh hardcodes as its own
-# default for non-NixOS clients.
-#
-# This value has no automatic source of truth: nix-cache's host key is
-# generated once (first boot / container recreate) and never touches this
-# repo again unless someone remembers to update it by hand afterwards. It
-# drifted silently once already -- confirmed live: variables.nix recorded
-# a key that no longer matched what nix-cache actually presented, which
-# would fail every real client's SSH host-key verification for
-# distributed builds without ever producing an obvious error pointing
-# back here (a client just sees "Host key verification failed" against
-# *some* key, with no hint that the trusted value itself was stale).
-#
-# codex-maintenance.sh runs this in --check mode on every invocation so
-# that drift surfaces as a warning instead of a future debugging session.
-#
-# Usage:
-#   scripts/secrets/sync-nix-cache-host-key.sh [--check] [--dry-run] [--host <name>]
-#
-#   --check     Only report drift (exit 1 if found, 2 if nix-cache is
-#               unreachable); never writes. For CI/maintenance use.
-#   --dry-run   Show what would change; never writes.
-#   --host      Override the hostname to scan (default: variables.nix's
-#               nixCacheHost / env.sh's NIX_CACHE_HOST).
-set -euo pipefail
-
-repo_root="$(cd "$(dirname "$0")/../.." && pwd)"
-variables_nix="${repo_root}/variables.nix"
-client_script="${repo_root}/scripts/proxmox/configure-nix-cache-client.sh"
-
-# shellcheck source=../env.sh
-source "${repo_root}/scripts/env.sh"
-
-check_only=0
-dry_run=0
-host="${NIX_CACHE_HOST}"
-
-while [[ $# -gt 0 ]]; do
-  case "$1" in
-    --check) check_only=1; shift ;;
-    --dry-run) dry_run=1; shift ;;
-    --host)
-      host="${2:?--host requires a hostname}"
-      shift 2
-      ;;
-    -h|--help)
-      sed -n '2,23p' "$0"
-      exit 0
-      ;;
-    *)
-      echo "ERROR: unknown argument: $1" >&2
-      exit 1
-      ;;
-  esac
-done
-
-current_value="$(grep -oE 'nixCacheHostKey = "[^"]+"' "$variables_nix" | sed -E 's/nixCacheHostKey = "(.*)"/\1/')"
-if [[ -z "$current_value" ]]; then
-  echo "ERROR: couldn't find nixCacheHostKey in $variables_nix" >&2
-  exit 1
-fi
-current_type_blob="$(awk '{print $1, $2}' <<<"$current_value")"
-current_label="$(awk '{print $3}' <<<"$current_value")"
-
-echo "Scanning ${host} for its current ed25519 SSH host key..."
-nix_extra_opts
-scanned="$(nix-shell "${NIX_OPTS[@]}" -p openssh --run "ssh-keyscan -t ed25519 -T 5 '${host}'" 2>/dev/null | grep -v '^#' | head -1 || true)"
-if [[ -z "$scanned" ]]; then
-  echo "ERROR: couldn't reach ${host} (or got no ed25519 host key back) via ssh-keyscan." >&2
-  exit 2
-fi
-scanned_type_blob="$(awk '{print $2, $3}' <<<"$scanned")"
-
-if [[ "$current_type_blob" == "$scanned_type_blob" ]]; then
-  echo "Up to date: ${host}'s host key matches variables.nix's nixCacheHostKey."
-  exit 0
-fi
-
-echo "DRIFT DETECTED:"
-echo "  variables.nix has: $current_type_blob"
-echo "  ${host} is now:    $scanned_type_blob"
-
-if [[ "$check_only" -eq 1 ]]; then
-  echo
-  echo "Run 'scripts/secrets/sync-nix-cache-host-key.sh' (no flags) to fix." >&2
-  exit 1
-fi
-
-new_value="${scanned_type_blob} ${current_label}"
-
-if [[ "$dry_run" -eq 1 ]]; then
-  echo "(--dry-run: would update variables.nix and ${client_script##*/} to:)"
-  echo "  $new_value"
-  exit 0
-fi
-
-sed -i "s|nixCacheHostKey = \"[^\"]*\"|nixCacheHostKey = \"${new_value}\"|" "$variables_nix"
-sed -i "s|NIX_CACHE_HOST_KEY:=[^}]*}|NIX_CACHE_HOST_KEY:=${new_value}}|" "$client_script"
-
-echo "Updated variables.nix and ${client_script##*/} to:"
-echo "  $new_value"
-echo
-echo "This only takes effect on already-deployed NixOS clients after their"
-echo "next rebuild (programs.ssh.knownHosts is declarative). Review with"
-echo "'git diff', then run 'bash scripts/codex-maintenance.sh' before committing."

scripts/sync-host-keys.sh

@@ -24,21 +24,13 @@
 # ever touches keys it itself manages.
 set -euo pipefail
 
-repo_root="$(cd "$(dirname "$0")/../.." && pwd)"
+repo_root="$(cd "$(dirname "$0")/.." && pwd)"
 sops_yaml="${repo_root}/.sops.yaml"
 keydir="${repo_root}/host-keys"
 editor="${repo_root}/scripts/lib/sync-host-keys-edit-sops.py"
 
-# shellcheck source=../env.sh
+# shellcheck source=env.sh
 source "${repo_root}/scripts/env.sh"
-# shellcheck source=../lib/nix-eval.sh
-source "${repo_root}/scripts/lib/nix-eval.sh"
-# shellcheck source=../lib/ssh-host-keys.sh
-source "${repo_root}/scripts/lib/ssh-host-keys.sh"
-# shellcheck source=../lib/sops-age.sh
-source "${repo_root}/scripts/lib/sops-age.sh"
-# shellcheck source=../lib/confirm.sh
-source "${repo_root}/scripts/lib/confirm.sh"
 
 mkdir -p "$keydir"
 
@@ -82,7 +74,7 @@ ensure_admin_decrypt_key() {
     return
   fi
 
-  local key_file="$DEFAULT_SOPS_AGE_KEY_FILE"
+  local key_file="${SOPS_AGE_KEY_FILE:-${XDG_CONFIG_HOME:-$HOME/.config}/sops/age/keys.txt}"
 
   if [[ -s "$key_file" ]]; then
     echo "Found existing sops age key at ${key_file}."
@@ -101,7 +93,7 @@ ensure_admin_decrypt_key() {
   mkdir -p "$(dirname "$key_file")"
   nix-shell "${NIX_OPTS[@]}" -p age --run "age-keygen -o '${key_file}'" 2>&1 | grep -v "^Public key:" || true
   local new_pub
-  new_pub="$(age_pubkey_from_identity_file "$key_file")"
+  new_pub="$(nix-shell "${NIX_OPTS[@]}" -p age --run "age-keygen -y '${key_file}'")"
 
   cat <<EOF
 
@@ -126,10 +118,12 @@ EOF
 }
 
 discover_targets() {
+  nix eval --json --no-use-registries --no-accept-flake-config \
+    "${repo_root}#nixosConfigurations" --apply builtins.attrNames \
+  | jq -r '.[] | select(. != "installer")'
   # installer is the one nixosConfigurations target that doesn't import
   # sops-nix at all (see CLAUDE.md's "Security Notes" -- hardcoded login
   # password instead) -- config.sops.secrets doesn't exist for it.
-  list_flake_targets "$repo_root" | grep -v '^installer$'
 }
 
 locally_managed_hosts() {
@@ -165,7 +159,7 @@ queue_host_sync() {
       echo "[dry-run] ${host}: would generate host key"
     else
       echo "==> ${host}: generating host key"
-      generate_host_ed25519_key "$host" "$keyfile"
+      nix-shell "${NIX_OPTS[@]}" -p openssh --run "ssh-keygen -t ed25519 -N '' -C '${host}' -f '${keyfile}'" >/dev/null
     fi
   else
     echo "==> ${host}: host key already present"
@@ -176,7 +170,7 @@ queue_host_sync() {
     if [[ "$dry_run" -eq 1 ]]; then
       age_pub="dry-run-placeholder-not-a-real-key"
     else
-      age_pub="$(ssh_pubkey_to_age "${keyfile}.pub")"
+      age_pub="$(nix-shell "${NIX_OPTS[@]}" -p ssh-to-age --run "ssh-to-age -i '${keyfile}.pub'")"
     fi
     add_keys_json="$(jq --arg host "$host" --arg key "$age_pub" \
       '. + [{host: $host, age_key: $key}]' <<<"$add_keys_json")"
@@ -243,7 +237,7 @@ apply_edit_plan() {
       while IFS= read -r basename; do
         [[ -z "$basename" ]] && continue
         echo "==> secrets/${basename}"
-        sops_updatekeys "${repo_root}/secrets/${basename}"
+        nix-shell "${NIX_OPTS[@]}" -p sops --run "sops updatekeys --yes '${repo_root}/secrets/${basename}'"
       done <<<"$changed"
     fi
   fi
@@ -363,7 +357,8 @@ cmd_regenerate_all() {
   echo "image/tarball before it can decrypt secrets again."
 
   if [[ "$dry_run" -ne 1 ]]; then
-    if ! confirm_typed "REGENERATE" "Type REGENERATE to confirm: "; then
+    read -rp "Type REGENERATE to confirm: " confirm
+    if [[ "$confirm" != "REGENERATE" ]]; then
       echo "Cancelled."
       return
     fi

secrets/common.yaml

@@ -5,103 +5,76 @@ sops:
     age:
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSAzdUlybVpDamVxYk94MDEv
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBpWjNSdEdZbUUzamswa08w
-            VjNiVjJkWjZvYjN1SUhMSG5ZOS91a3FrNDJRCi9IQWh4RVdwdkhwQjd6TTBhcW9J
+            aCtzSHB0bFVZMnYxTkpuM1psdVYzWW55SzMwCkliMWVOUlBqRG5wOGZjQVg4MkFz
-            alhLMlArM1VvVkE5VUxOQ1ZWNmw2SmcKLS0tIFRvWklUN0xxSFdKSk1vakExQ3Rv
+            NEVkMXdkTjhWRlZmVGlzZElid2pUMXMKLS0tIGtHUmRCNXNhVmloUHYzQnE5YlBS
-            OWpmSGRTUHlvVysvR2N4UHRYWHgvMHMKqapmFB4ct1FTPa1hMWyylvLycUvOEFop
+            YnVSQjJlT3JnQ1RNMm9xV2xKOGRZUDAKc4VTl9NEI9Rv8+4J3JTeHTt2h8Dr2IJv
-            enZI5SV1F86HOTEhK0QbnEW3jMl4ZXOtAlwcys2oE9a783MSgVPxeg==
+            tfvoNJQM/w6RAJWNTkaDmzZa9OnUW+grDlBQKlDuAnr6fZmuNTH2hQ==
             -----END AGE ENCRYPTED FILE-----
-          recipient: age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad
+          recipient: age10nd382a9klsn2mrs60emdtsxe43pht3a0m9p29phfrhy0wfyt3vsq9r667
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBEc0lHazMrVUR2UUlaQ21O
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBOR25UN1c0aE5SYWphbU0y
-            T2Jha0EvUmJzVC96Wksxay9GVlEwU2lZWVRRClBQdWVqTjNTYnBrQldMeWR0dWNz
+            SHRTZ1B0WC9NU3Z5VHpzTXpLSUxHTDI1ZFE0CnFpYUN1eGZQejJMblZPd1ROeUth
-            QTN6T0VtQzhpM3UwKzVjUjl0Rkp4VzQKLS0tIEg5VzhUT1VTamQzZjNYT2orMnY0
+            dklZYVVNa1ZNZ1d4dW9vMCsvQWp1RkEKLS0tIERxakx5L0JrQitib1EyNDRMbDQ5
-            Q1BpNzI2cVk3by9Ic3lrQ25sM05YMlkKXVofmCu7iI/my1o47p2eUzhXuP/V0NS8
+            Z3hDWUFEazdxczVhaHJYK3VZeEJSSDgKkw9T4ZuT+VHIF4WopqRHt8vW30kOysJ3
-            mmIerz2v2uUwoS252qSU4a2vmxPOgWM0Os1vWsYamsapofQc6TaU2Q==
+            vOq6EZ3Fqkgmoxm69Zp2gFnuE9GZIBy3VPQVLU2k6dZGJ3IvmLYeBA==
             -----END AGE ENCRYPTED FILE-----
           recipient: age19gfn2yedg76dmztm4hncr7vf3r3c9j0qpt4rap7y7gersjk4m3ks2lhd0e
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBYZHVnTEk2SjUwdTdKdWNV
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA0THJzMFBTTCtDMWRmZ25M
-            dVFPNDFvdzY2VUlzMU5nK0t0UlUxU3Ewa0g0CjJCd0ZrMjhRZldaUDNIS1pGZTZn
+            dU55OVhBb0trWWRUNlArTnEzRjhiYngvRENNCjF4d0M5NlYyQW50TTdMRXpuUjRr
-            Z2h2MEJ6TUpna1NNdXl4R3d1S1djVDQKLS0tIFJqMlZ3b0Zzalp2N0hIc0NHMzU4
+            M1NwV05JOHV6T2cxT2FheVpuZ0w2T0kKLS0tIFBxdlVpVEoxOUpSWjk1ejRsK1NM
-            RGRoVjdvMEkxam9DRzdYaW16enAyQ3cKUZTDqvWnmEMKHhI430coKHw3raIiD/o1
+            V1UwTU1scG91L2FIemtwSW5JbFlmeG8K/1WIlaIidy3x3ptoRpS/DG88064LQ6Mq
-            1BtDWOmKFFcuaF5mRx/qTUjEwU5OZWOujqLSPoVbmsbhyxsG3XQSHg==
+            GbfB0jfq5PILDQMMuZu5oIBY31SxwnhZ02Ns7gA67kgNIRSCmk9WyQ==
             -----END AGE ENCRYPTED FILE-----
           recipient: age1ll6hj5ggruetgjwjfnplpn5xtq35uhlcdflksx3xmnjm6s3uad9sz70jkf
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBzbXdrajlVQU5RditMckh6
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBmRURQVGw1a1E1MkIzV2pa
-            ZGhvcU01UEdMbURlcG9mZzg0RTJhcHJ4QlQwCjgyRGVXYytxUFB0WXhadHQ1YVpF
+            RG5HSkM0c0huUGVWcnFZOGlacGlGOHFMTVFrCm5OS09HRFc3TGVUYmtzTStxL0Q5
-            VUJpVzE2SzFPc3FHV25FQmVSQzNJTm8KLS0tIG9DazRkUkwyNHNQMnp5R3RySDBo
+            N2hRMEcxUE9MTmZXL0wvME5EZXF1Z00KLS0tIHdHMVVHcTZzMmdXU0s4QlVqSS9Y
-            aGFLUFBjZjVxeWFzTXFldHVRNkNyYTAKd6eS5lks4+3SV1bFBQWyPi7OZcvRMDIc
+            ZUVmcWhPaURIUFJGR0V4bUZwKzM1bm8KlvGMNEClbLlfvJqNQHhd0dI4ihShLChF
-            kYD5C/vMkKlvBYyODCWJyim2xgM/nyQNcf/q4BUS3HF/RidRdJh9NQ==
+            GI/fydgrBruw3Otv6KLZu3CBC7iNcKlvZxz+YGD2qbicmyQ5hAhDSQ==
             -----END AGE ENCRYPTED FILE-----
           recipient: age120le4a5l8dh3lyfgvmj3d9ksmej6ajs5mer5y7r0vfg3x9fn69dqf8xgzu
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBFZEhIT1REUTFtdkIzaDFY
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA5bWpFenBlQldna3RhSFpr
-            dGU4VjU3QlpPU1Rod1dTUWhBbjc0WTR5bUF3CkNGY3F2Q251aXlGNCt5ZjFWMTE1
+            bEJBaHJDMzM3OHlqTmozcWU0VDM1bTFUWFZzCnZtNHZjZ1U1RzNkUlBHZFozWXdt
-            RjY4bHZ1T29aK3N0SktjdUpZbSs4QVEKLS0tIDZrMWd3aFVRMEZMU1N1dlZxYTZS
+            VVkxQjMvTDJtbFZnclpkUEd4TEVmNTAKLS0tIFlhV2ZSSzJLRVNoMmFyVktDOElR
-            U3gxWU5EVVRXUGxJVlZQZmpZRmdhbW8KJ8yD9laK2T1qn0z2uYNeI80rtMlOVi2M
+            YUxqZUFoY1ZWeGlldGplMjVQa1A5aUUKWelY6yO7Mr6dRvj4MVMbq/Z9JgrAnahz
-            qIPn/FSoWnKQ7NotSTGUtEhC+f/nXfUQrBd5fsfmja++hrevTmkqYw==
+            BDhHqObzJrOCtfDCTWiYuP+0yvIFWItMWhGSMw9MwwivvwnrEa+ZuQ==
             -----END AGE ENCRYPTED FILE-----
-          recipient: age1jy444f9d9stygj4p3w9kh54cqcfr654tvr75tdvee5cxsgtdtc9q3v60ep
+          recipient: age1qz9d4ka4xgexujyd247s7lp737sulp5fhxl5d65fj2ykvc4j4edqrsdks8
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA0N1owUGpuWWxWb2t2Mk5Z
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBiK2hKb2VaVnoyaEVYUHZZ
-            QlZ6Nm5lcnNBY0d1NldBQXY3OThLM2UxbkY4CkZyRUl4S1JRaDhnemRIYWR1OHZx
+            OWVUSGtONGs5dEljTjJQdlhEcjNjdjViT2pVCkpaOHVZMlpXOFRveVlMeXZqWmoz
-            aWliVWh3V1RBL0R3Q0RqOE1SM0VBblUKLS0tIGpaUjJxdnV0UW55T01HcFBsdHR2
+            ZHJRQTR2dmJQSEozeTRGMEdUdFlmZ2MKLS0tIERWS1RVdW1jQytBZzlkb3puNjhH
-            aEJ3UzJ6RklZVFRrNGMraUtGYXVZd0kKaQmzjnI6xgV7H1YcoI+gRn2IVfOLTJBY
+            ZjdlZmtzNXVOQ25DeCthUzhRRm1MT2cKaxc7zGm57iJFSeYc2IPqF4Eaxa44nR37
-            rO43fvVtZ79c1as6CL+GoEIJY/uVA/3M4gQ0vYbDDn57vm5OOJW8jg==
+            pWZw+erG4F9AAZ2F047q+oLKe0B8FLSF54IbcXdQhitgGNR7B2HVeA==
             -----END AGE ENCRYPTED FILE-----
           recipient: age120whqj96g26lsgy4udvgsn8dc9lumh8jeu3a564fx79rjr5lxffqmrljuu
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBMWTcwd0JLS0lybWREaU5h
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA1ekhUTG5VOFErL3pFeWZM
-            NHczcEQxeUx4U09oV2k5ZXpKTGxxR3ZYd2tnCkVXR3kyTHZSSWNaUCszL3Rvakhm
+            RG9NVnN6NFl3bzlFeTQzdHFtZmhwem04alQ0ClpJRStObERMZ0w2V0NhR1FSeW96
-            bVl5bnFRVkhJRFVaY1NQYTNrd2JKMTAKLS0tIDJTT0YvUE5HUWVKRnhXY2tvMjI1
+            M1d2V2NjUkUrLzN2ZVNSbGY4bll5WmsKLS0tIC94dVFQcXJ6d3pLU0VHNEFGR0ls
-            VXNlcnJqcDM5d3poVU1SKzQyNWdpRzQKTht/ko7cy7OY0wGfza4eierYS7q/nCFH
+            a1Q2UmNuSjVMNG5XZGZKV1VmNHFPQXcKQJrZGw/9fPnXeFZ4omrkEgrzwplhwvRW
-            YsG74ez3piUQ1rdJRi0e29QWz4xL3JeU9oE+tr0rMB6WvgTmuX5gwQ==
+            i0FXuepoU353sR7enyL34qPoOdm05ivowuPKNzkq8D4i5AF6vGv+YA==
             -----END AGE ENCRYPTED FILE-----
-          recipient: age1xjst4frdh0th6q8m7p7u9g5af7ty5jqeum0p6z8a52a9q7st7ewqw8yl9j
+          recipient: age164px2a8e48ptsf9ngtan38aa6jls4jdl26mzrgzf6sn3vcvt49hqjrgr8w
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBLWmtNOVVvRW9QbU50OUxv
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBoZ2lHM2RBQ3lUK216dkcr
-            TUYxWXJ4cFVaMjVnVHJVK1VTZzhDd2tCMWpnCllPWnl2bjcxemF6cFp1blZnMEMy
+            Y3RrcXR3QTdFVjJRWlhpQWVFQ1cyZWNabkRFClAwRi9PSHF5ZWFSUzJuRXF3bU1R
-            clhqdlVzdEZTYnY3b0ZhR2hsMXRlQTgKLS0tIHEzNU9yNmhackt6R2dLT2dZSEFJ
+            b0U5TFRZaFdmR1NMS3RRT3E3M2hUdE0KLS0tIEtrUy8ydkNyVHBiOVR6WEdjV2VN
-            UnJXeWVyQld6NFhXUWowUlVXaEtKVUkK2Saa8w9/SOWw1VXWkUg62ay31bSIqHWB
+            NVJHUVgwRkhxcmlwcFkrRlFwTEF6YVkKzXyJk0UnmUsvb+NzNVcf/gf7OEEt3P/K
-            8QmNafddV0WQ8oYcD8ZMf8Bm8jP9yLMUDOiVzVZiiTGWEx7EbUQV3Q==
+            OIGxDrGfs/zNQgeKXNbQlQ4p4jOaybG8aCmX+A4qTk6/I8yY8LTJWg==
             -----END AGE ENCRYPTED FILE-----
           recipient: age10at8862478urh0eeuwh8hzln6ck78jgwtztgxatwqlzwagg77y5snm4xzg
-        - enc: |
-            -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA2OEs4dWJ5UTBoY2hHanZY
-            N3VNMWdGVkJHMlVublBmN2NiMUNtRnVnaXdrCnYzV3EvRzV1OXNyOFVKc2lXMFov
-            Mkgvc2dFdyt0MGJIMlFPckpBeDZ5c0UKLS0tIERrOGc4aWtFSTJWN1M2V0hyQ3hS
-            TC9HYVMyVWVBc1lHbUlqbnpsOWJobU0KkZZph2dnKwi4w+RXf7RXoHCYkXxmuLNj
-            rinQQlQeOwQptBn7+kRJubNjyHOlSHXhpsbV3/IkJRNMhw69knzasQ==
-            -----END AGE ENCRYPTED FILE-----
-          recipient: age1ezk9x53zt8kcnscdm80jcyf0xq97vndv7jsn3rl8cc0cwm2jmpmq372dzs
-        - enc: |
-            -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBoWkljeFFBS3hhOG0relVz
-            V0JUK2hWaklxTGVhMWR4bytPczhjcldheno4CmZUTWszREVUdVVQazNOdXAvY0FN
-            bEtQSDJveHplNTE0a0FvWEFxVlEreDgKLS0tIGNKUkNVQ3BDQ3d0V1lyY0VsaHda
-            cDNHa3lYTkxBeVFlSGtIMVFScmxsazAK5ZyJ35/jjFRhQdG1PMOcEJ3MJf96i8DZ
-            AvCw9jc7Hsbs6+LoZ45K1QKoWoZmBkmAatbksXo3jnAzEHmcQqODKQ==
-            -----END AGE ENCRYPTED FILE-----
-          recipient: age1fxxzpnfse8nd9wz78ht3m0plrmraacf4cpga0pe8fm2tdnqcgy8q7qsyvp
-        - enc: |
-            -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBtWGRLTCt5dXZMR1d6a3lD
-            Z0t1SDAwY3V3MXI1MGt5RGkrc1JHSVRUUzNZCi9UOTBTcVY3NkhFb1FFOS9vbTY2
-            S1BqNmd2eWVXbnliOFJWRDY0UmhYV3MKLS0tIExYNlJxcTBidnpObHgweHlqNHhz
-            OXpwRHhyOGhNRXNTWDBIUVJCR0VPTkkKQZh9e7lOINL0khHS6tBehCrm+SX5Q6XE
-            XL4FpBsJ5+MnxTx1O/bu6/f7OvZqfnxhQv0lkKOMJnkZfPZx5D+meg==
-            -----END AGE ENCRYPTED FILE-----
-          recipient: age190htw7prp4vln076dxjx3gxxaq06h0zl0te7cqgpx79vl3lhkaes8suy05
     lastmodified: "2026-07-19T02:30:40Z"
     mac: ENC[AES256_GCM,data:UiL3VMDF6rq4Nr87KspcDx434q3tfNXeb5pwH2O+4ssNQ6xzcYDdzXBnhAY3zLBsqPMKrvHBd4Ot/gEMcq3FMIVe7Q6p9yWKpep66KZ/yWEhAlwIVhD79Oj8VS+1CHKjf25zpRdhZorp04oeFQQd9VfjJB4EE/Q1aVbwTGlpIic=,iv:i/0conaFgFia+wzNTdUL6tlSTw35HTK3Ap1Sr5RGHf8=,tag:ULbz5FllShA/JjlSRdxA0g==,type:str]
     unencrypted_suffix: _unencrypted

secrets/nix-cache.yaml

@@ -4,31 +4,31 @@ sops:
     age:
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBPWE1HTUhiSUp5ZEUwWEpI
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBDbHd1Y1dpa2ZiQ2E1bXRP
-            bGpkZlBIMUo5ZlYrQ09SN3Q1a0ZkQ0ZnOEhVCnJPNEZQenVWWGZiODlzQzNEc1Zq
+            SnkrWHI0V2U1eGFKY0RZamZQQjluS0hGeENZCmduUFQyd1Q5RkZGMGFoenJhNmZh
-            c3l4OWZJTElJc2Y2UE15OGtEUzhyY1EKLS0tIHNJUStyWnlQWjZBbEZjQ3UwdUpz
+            VmZ2OStNaFpJejFxQ2JUZXFpNThaMncKLS0tIEhJdGdQeXEzb25Nbk5YZktCWVUz
-            ZndoUDR6bisrNGJCUHk3TGI4bTZaMFUK87fFsm9ne9s+PK2pcwtrDjqyGBss2r2E
+            NUJDUWRoTkd5R2pFblZjS0NSbVR5dkkKDYeW+zRpha04/CasFM91K6v1PpkNGHRu
-            8lhqoeiKZ2j96z8kP/7ChzovwTCmqdcmAQuyNQD+ZAFijseipSvfbQ==
+            qAoKs9KSg9VxS7ya8RuLmylKRdpPkupm/8SXIJvQuCXp5LWmNJ4zkA==
             -----END AGE ENCRYPTED FILE-----
-          recipient: age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad
+          recipient: age10nd382a9klsn2mrs60emdtsxe43pht3a0m9p29phfrhy0wfyt3vsq9r667
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBUYi9SRFFGV3Z6cFd2Znk5
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSB4UktiUUdmd092bnZMdFMz
-            b2FLbWtzTllJMDBUaGk0NTViOTNBa2hQclVZClZHKzNhbGVjQUJhWkFWdTFBMG5a
+            Q05xVlhnNzhPZUY4TjF5bjRCbklacTdJd1RBCnJ4bEVMaWRLZExIUFVEUDBXTnlV
-            cUFJdUdyVG5HQXJRRnJId3hqRTN2cXMKLS0tIEFMRjh3WE1ON0U2TTNTZ3hxMTR4
+            MDU4WUk5VlJjdlhVUVpzZXlnWHhqTjQKLS0tIE9iclhGVElPcU9OLzF0bEVjMjVp
-            ZGRlemlIbDZKeExmVHROc3Eyak5DdzQKaLwIVDi6BN4cxpVxJoqTYvJETPOp4thc
+            YzlQTGFYZEhLdTk3N3ZramVjVGRXREUKjOjqO/jX5iEKN43WiJ8qS/1mDfxdj8uO
-            l9uVMvIGuEsEZgDsvShw1dYLljd+uGy/A+dXbcxIUCP/mmPkwmd1Pw==
+            K7Yyc/Yj0qMvGwLNzphjmbT29P7dXk4Ht4TedqCd+8DfhpOgLVIaSA==
             -----END AGE ENCRYPTED FILE-----
           recipient: age120le4a5l8dh3lyfgvmj3d9ksmej6ajs5mer5y7r0vfg3x9fn69dqf8xgzu
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSArOWovSW9DeFpxL0VDUDQ3
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBjaXpvQU9yRUc3ektPMmU5
-            SHUwTzJVZUtPV01ZRkdCUXZGL2lTRCtCNFNnCjBSNExqRW5mTEN5SFVucHJHSzZt
+            Q0xLWU9mYXVOeTVBNGNsZzJPa1lkVlRUZHlvClhoSVV6YjB1Q3pTTzVvNFlNYkU4
-            cDlNc3BjY3M1c1k1Z2tkVEg4R1pacGsKLS0tIEFWbHNKZW0vbVh1Y2VhQW93OUwx
+            Y2RrbFk5SUFKSDVjeFU0Wlc2aGFUMFUKLS0tIDlVeXM4WWRUakg4Zk5mcjdJL3VC
-            MWV0eW9sOXdQd0l2ZjlWOEVVc1dwcTgK2s4p9xoNkawH2OkGsl80bNIo3ad5vn4W
+            S1k5eFBpVnREQlZwYllpeTNhWW5GS1EKi2sMwyJJ0D8acjCZmxlcwdU1sglBuxR7
-            Z2w+jwppSoUmbQnD3WFbLmSSxmuobmU8HILwElv6SZu+KE3aspF6XA==
+            2SEMsctdGC+5E3ilPXvPpZ5RONZHbXxn6kQRBlBv6AJERpGDzsfgfA==
             -----END AGE ENCRYPTED FILE-----
-          recipient: age1xjst4frdh0th6q8m7p7u9g5af7ty5jqeum0p6z8a52a9q7st7ewqw8yl9j
+          recipient: age164px2a8e48ptsf9ngtan38aa6jls4jdl26mzrgzf6sn3vcvt49hqjrgr8w
     lastmodified: "2026-07-19T23:30:21Z"
     mac: ENC[AES256_GCM,data:kLGE2xawQT7mx+sfw68hmGk5nCEGiEjZrqTEl9B1dtQmTrMwmoVr/1RISi4LfJrwxy31mDgff4lcIL4wIJuM373uk3X8j4RNyYQNTfKEkORT6r8NHeepNs267O77pKGd7OmcM4MT/BqOnB8ELS7Wlf2ect7CAlvUUVyc8icxgZE=,iv:EYLDsHYHZ1XOQXafOTqHHWpk/OBNq/R6IJnOBYV33E4=,tag:thxrCPC5oGvDjhK7Dz87YA==,type:str]
     unencrypted_suffix: _unencrypted

secrets/server.yaml

@@ -3,20 +3,20 @@ sops:
     age:
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBURmMzN3hrSlNrUkkvVWNl
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBxaFZURjAxMGRJZEJ5MW1x
-            L3M1dEhWeW14N0RFNVRPci9QK1YyTFdqRVVJCk5WaWswT2NicldkYzZjbVhYU2xu
+            ZjVwWEQrQlkwNmRibVNiL2RpTTFLeUVDQ3hRCkVIamVnZkM1MnlueloxMHVFQnBF
-            MGFsNmUzeTN2TS9wOEdvRURpVUVYZXMKLS0tIDZ6MEdPTVhCaTQ2UXFWTUFtc0pm
+            RjV2bnUrZUo4WGZJTmR4Y0xITkxRUkUKLS0tIGlJdVQ5MFBubVhxRUVMWW0wSGpP
-            MFlJb0c2WXJtMGRLZEZYY0pZWWpFWm8K/mlYZIe8UC0QU+1mq3NtrtTF5b2m5hCK
+            UGdKNUNPYW9nek1UZ0tWbXd3QVNUNDgKIHOiKelITQdH5R4Nc3WF7mzz15D1f9on
-            +K0QiZLTKmmDcr4bRhZ32VE7R7GRwtMNnOP/mElZvPAyWyHHhRiOHg==
+            VaTdr5qkf8LNNvPI0fxsXA9is5cqeg+KbDRHtUumEhNp6Zrf8zWBkw==
             -----END AGE ENCRYPTED FILE-----
-          recipient: age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad
+          recipient: age10nd382a9klsn2mrs60emdtsxe43pht3a0m9p29phfrhy0wfyt3vsq9r667
         - enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBURHlUL0RNMUtNallEcG5p
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA3N0hvV01naytDSWVwK1B1
-            eG4xby8yVzdQUTBaNkl4ano0YjBMcDd0Wm5NCkZvaXNPZm9wemJkMmNSdGdOaTI4
+            MXM1ZkdpaVc2Q3FPV2VBcC83WmcvSjdGUGgwClJGSXZ6YW5JeFlValNJbjVhK29u
-            Z1RwUnhiRUpCMWZaeWtlSVBmNW5KOXMKLS0tIDk0R0k3ZHczTFNCWUZxSWF0M0FJ
+            bUFqN2dRQTI4ZkwyeXNWYk5JeWVJRXcKLS0tIDlMMkNBUnNUSTJwVVFmc2dlcEZS
-            MGlZMmtuSFYrcG1meDNMWDNqSjFxcE0KDu2dAc0gqmmPkpbpBe4YohM7rYmUwEkI
+            VGQ1VHR2dXB0M3RsalppVWxiUUROM0UKZM/4QDTam3LDTzjnDs41Ije50R7Q7GC4
-            V2FUQwjlvh50svtjCVdYbx2xuq4sQLnKelk/q1onLw60FwsVfzD8sQ==
+            IZbUZjs72rBzY8IkJDbN9JidadEc4NAtMOJwXiJbpZGiCBNfc8+SXw==
             -----END AGE ENCRYPTED FILE-----
           recipient: age1ll6hj5ggruetgjwjfnplpn5xtq35uhlcdflksx3xmnjm6s3uad9sz70jkf
     lastmodified: "2026-07-19T02:30:40Z"

variables.nix

@@ -26,7 +26,7 @@
   # fresh client that has never manually ssh'd to nix-cache before. Update
   # this if nix-cache's host key is ever rotated or the host is rebuilt
   # from scratch.
-  nixCacheHostKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPeWgMsdaiz4axT/deFc1+0B5bN+GX/NOeW9bbQ0c/IT lxc-nix-cache";
+  nixCacheHostKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHrMKZlIGUd3pH9G3AqbsruqUGjxIXMAZw52u9MwiBCn lxc-nix-cache";
 
   # Public keys authorized to SSH in as remoteBuilderUser on the nix-cache
   # host (modules/nix-cache/server.nix) — one per client host that's allowed
@@ -38,7 +38,6 @@
     "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIGtOWOCS+ImHc7NehguoyD7PbonGosKMZqc9+QR3v/h root@nixos"
     "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHxXTQxFnArK5HXG7czeoybZebCGfxpUdusJkPn+BCSp root@server"
     "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAICMJhrfFayLBG+gWtO6oAvgambw5nWWgztiTFEaaaVRH debian@surface"
-    "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIJEj26SL/emsVjW2YhRucJVp2kTz8WgcEQgjBEBLRikk root@claude"
   ];
 
   # Admin SSH public key, authorized on the primary user of every host and
@@ -138,14 +137,6 @@
     # shortcuts on the gui build type (hosts/nixos/home.nix).
     pveWeb = 8006;
     pbsWeb = 8007;
-
-    # Tor relay's ORPort — the port other Tor relays connect to for onion
-    # routing traffic (modules/tor/enable-relay.nix). Tor's own conventional
-    # default; opened via services.tor.openFirewall rather than
-    # networking.firewall.allowedTCPPorts directly, but kept here anyway so
-    # it's not a bare literal duplicated between the relay's settings and
-    # anything else that ever needs to reference it.
-    torRelayOrPort = 9001;
   };
 
   # .raw disk image size for every proxmox-* host's standalone Disko image