nixos/scripts/ha/cluster-init.sh

#!/usr/bin/env bash
# cluster-init.sh — one-time HA cluster initialisation script
#
# Run ONCE from ha-server-1 as root AFTER both VMs are booted and have SSH
# access.  It:
#   1. Generates and distributes the corosync authkey
#   2. Waits for corosync quorum and pacemaker
#   3. Initialises DRBD metadata, promotes node1 to primary
#   4. Creates XFS on /dev/drbd0 and mounts it
#   5. Creates the directory tree and iSCSI LUN backing file
#   6. Configures LIO iSCSI target (file-backed LUN)
#   7. Configures Pacemaker resources: DRBD → XFS → iSCSI → NFS → VIP
#
# Prerequisites:
#   - Both VMs booted with the ha-server config (nixos-rebuild done)
#   - SSH key access from node1 to root@NODE2_IP
#   - VMID_NODE1 / VMID_NODE2 filled in below (needed for STONITH setup;
#     cluster starts without STONITH, which you enable separately via
#     scripts/ha/cluster-enable-stonith.sh)
#   - Run as root on ha-server-1
set -euo pipefail

# ── Configuration ─────────────────────────────────────────────────────────
# All values override-able via environment variables; defaults match variables.nix.
NODE1="${NODE1:-ha-server-1}"
NODE2="${NODE2:-ha-server-2}"
NODE1_IP="${NODE1_IP:-192.168.2.228}"   # vars.haServer1Ip
NODE2_IP="${NODE2_IP:-192.168.2.227}"   # vars.haServer2Ip
VIP="${VIP:-192.168.20.229}"            # vars.haServerVip (storage-client, vmbr2, VLAN 20)
VIP_LAN="${VIP_LAN:-192.168.2.229}"    # vars.haServerLanVip (LAN, vmbr0)
XFS_MOUNT="${XFS_MOUNT:-/srv/ha-data}"  # vars.haStorageRoot
ISCSI_IQN="${ISCSI_IQN:-iqn.2026-01.home.sweet:ha-storage}"  # vars.haIscsiIqn
ISCSI_LUN_FILE="${XFS_MOUNT}/iscsi-lun.img"
ISCSI_LUN_SIZE="10G"
DRBD_DEVICE="/dev/drbd0"
# DRBD backing disk — by-id path that resolves correctly on both nodes
# regardless of whether the OS-level name is sda or sdb (Proxmox VM disk
# ordering is not guaranteed). Matches haServerDrbdDisk in variables.nix.
# Override DRBD_DISK if your hardware uses a different controller/slot path.
DRBD_DISK="${DRBD_DISK:-/dev/disk/by-id/scsi-0QEMU_QEMU_HARDDISK_drive-scsi1}"
VMID_NODE1="${VMID_NODE1:-}"            # set by deploy.sh; needed for STONITH
VMID_NODE2="${VMID_NODE2:-}"
PVE_HOST="${PVE_HOST:-pve1.sweet.home}"
PVE_USER="${PVE_USER:-wayne}"
# Inter-node SSH: HA_USER is the user to SSH as on NODE2; HA_KEY is the private
# key to use.  Default is root-to-root (no key arg).  deploy.sh sets HA_USER=nixos
# and HA_KEY=/tmp/cluster-init-key so the script works even when root-to-root SSH
# is not available.
HA_USER="${HA_USER:-root}"
HA_KEY="${HA_KEY:-}"

# NFS dataset subdirectories to create under XFS_MOUNT.
# Must mirror vars.nfsShares subpath values in variables.nix.
NFS_SUBDIRS=(
  "docker/config"
  "docker/volumes"
  "docker/databases"
  "docker/nextcloud-data"
  "raspi/volumes"
  "proxmox/iso"
  "proxmox/lxc"
  "pxe-boot/images"
)
# ──────────────────────────────────────────────────────────────────────────

log()  { echo "[cluster-init] $*"; }
die()  { echo "[cluster-init] ERROR: $*" >&2; exit 1; }
warn() { echo "[cluster-init] WARNING: $*" >&2; }

[[ $(id -u) -eq 0 ]] || die "must run as root"
[[ "$(hostname)" == "$NODE1" ]] || die "must run on $NODE1"

# NixOS may not include xfsprogs in root's PATH even when it's in the store.
# If mkfs.xfs is missing, search the Nix store for it.
if ! command -v mkfs.xfs &>/dev/null; then
  _xfs_bin=$(find /nix/store -maxdepth 3 -name mkfs.xfs 2>/dev/null | head -1 | xargs dirname 2>/dev/null || true)
  [[ -n "$_xfs_bin" ]] && export PATH="$_xfs_bin:$PATH" \
    || die "mkfs.xfs not found — add xfsprogs to ha-server.nix environment.systemPackages and rebuild"
fi

# drbdmeta lives alongside drbdadm but may not be in PATH when run via sudo.
if ! command -v drbdmeta &>/dev/null; then
  _drbd_bin=$(dirname "$(command -v drbdadm)" 2>/dev/null || true)
  [[ -n "$_drbd_bin" ]] && export PATH="$_drbd_bin:$PATH" \
    || die "drbdmeta not found — is drbd-utils in ha-server environment.systemPackages?"
fi

# Portable 16-hex-char UUID generator (no openssl required).
_rand_uuid() {
  cat /proc/sys/kernel/random/uuid 2>/dev/null | tr -d '-' | cut -c1-16 | tr '[:lower:]' '[:upper:]'
}

# Inter-node SSH/SCP helpers — abstract over root-to-root vs nixos+sudo.
_SSH_OPTS="-o StrictHostKeyChecking=no -o ConnectTimeout=10"
[[ -n "$HA_KEY" ]] && _SSH_OPTS="-i $HA_KEY $_SSH_OPTS"
if [[ "$HA_USER" == "root" ]]; then
  n2_ssh() { ssh $_SSH_OPTS "root@${NODE2_IP}" "$@"; }
  n2_scp() { scp $_SSH_OPTS "$1" "root@${NODE2_IP}:$2"; }
else
  # Non-root user with passwordless sudo; wrap each command with sudo.
  n2_ssh() { ssh $_SSH_OPTS "${HA_USER}@${NODE2_IP}" sudo "$@"; }
  n2_scp() {
    # SCP to a tmp path, then sudo-move to the real destination as the remote user.
    local src="$1" dst="$2"
    local tmp="/tmp/_cluster_init_scp_$$"
    scp $_SSH_OPTS "$src" "${HA_USER}@${NODE2_IP}:${tmp}"
    ssh $_SSH_OPTS "${HA_USER}@${NODE2_IP}" sudo mv "${tmp}" "${dst}"
  }
fi

# ── 0. Corosync authkey ───────────────────────────────────────────────────
AUTHKEY="/etc/corosync/authkey"
mkdir -p /etc/corosync
if [[ ! -f "$AUTHKEY" ]]; then
  log "Generating corosync authkey..."
  corosync-keygen -k "$AUTHKEY"
  chmod 0400 "$AUTHKEY"
fi
log "Distributing authkey to $NODE2..."
n2_ssh "mkdir -p /etc/corosync"
n2_scp "$AUTHKEY" "$AUTHKEY"
n2_ssh "chmod 0400 '${AUTHKEY}'"

log "Restarting corosync and pacemaker on both nodes..."
systemctl restart corosync
n2_ssh "systemctl restart corosync"
sleep 3

log "Starting pacemaker on both nodes (may have failed at boot before authkey was placed)..."
systemctl start pacemaker 2>/dev/null || systemctl restart pacemaker 2>/dev/null || true
n2_ssh "systemctl start pacemaker 2>/dev/null || systemctl restart pacemaker 2>/dev/null || true"
sleep 2

# ── 1. Corosync quorum ────────────────────────────────────────────────────
log "Waiting for corosync quorum..."
for i in $(seq 1 30); do
  if corosync-quorumtool -s 2>/dev/null | grep -q 'Quorate:.*Yes'; then
    log "Quorum established"
    break
  fi
  [[ $i -eq 30 ]] && die "corosync quorum not established after 60 s"
  sleep 2
done

log "Waiting for pacemaker..."
for i in $(seq 1 30); do
  if crm_mon -1 &>/dev/null; then
    log "Pacemaker running"
    break
  fi
  [[ $i -eq 30 ]] && die "pacemaker not running after 60 s"
  sleep 2
done

# ── 2. DRBD initialisation ────────────────────────────────────────────────
# Put both nodes in Pacemaker standby first so it stops managed resources
# cleanly, then enable maintenance-mode so Pacemaker's monitor operations are
# suspended.  Without maintenance-mode, Pacemaker keeps monitoring: when it
# sees DRBD Primary on a standby node (that it didn't start), it triggers a
# stop action — killing the initial sync after ~10 s.  Maintenance-mode
# disables all start/stop/monitor actions for the duration of the sync; it is
# cleared after UpToDate/UpToDate is confirmed.
log "Setting both nodes to Pacemaker standby for DRBD metadata init..."
crm_standby -N "$NODE1" -v on 2>/dev/null || true
crm_standby -N "$NODE2" -v on 2>/dev/null || true

# Wait for Pacemaker to actually stop DRBD (if it was managing it).
log "Waiting for DRBD to stop under Pacemaker control..."
for i in $(seq 1 30); do
  n1_role=$(drbdadm role ha-data 2>/dev/null || echo "Unconfigured")
  n2_role=$(n2_ssh "drbdadm role ha-data 2>/dev/null" 2>/dev/null || echo "Unconfigured")
  if [[ "$n1_role" == "Unconfigured" ]] && [[ "$n2_role" == "Unconfigured" ]]; then
    log "DRBD stopped on both nodes"
    break
  fi
  [[ $i -eq 30 ]] && warn "DRBD still active after 60s standby — forcing down anyway"
  sleep 2
done

log "Enabling Pacemaker maintenance-mode (suspends monitor/start/stop during sync)..."
crm_attribute -t crm_config -n maintenance-mode -v true 2>/dev/null || true

log "Detaching DRBD on $NODE1 (belt-and-suspenders after standby)..."
drbdadm down ha-data 2>/dev/null || true
log "Detaching DRBD on $NODE2..."
n2_ssh "drbdadm down ha-data 2>/dev/null || true"
sleep 2

# Ensure /etc/drbd.conf on both nodes points to DRBD_DISK (the stable by-id
# path).  VMs built before this fix may have /dev/sda or /dev/sdb hardcoded.
# NixOS makes /etc/drbd.conf a symlink into the read-only Nix store, so
# sed -i on the symlink target would fail — we break the symlink first with
# cp --remove-destination, creating a regular writable copy.
# Rebuild+redeploy (--force-rebuild) to make this permanent.
_PATCH_DRBD=$(mktemp)
cat > "$_PATCH_DRBD" << 'PATCHEOF'
#!/bin/bash
WANT="$1"
conf=/etc/drbd.conf
if [[ -L "$conf" ]]; then
  cp --remove-destination "$(readlink -f "$conf")" "$conf"
fi
cur=$(drbdadm sh-ll-dev ha-data 2>/dev/null | head -1 || true)
if [[ -n "$cur" && "$cur" != "$WANT" ]]; then
  echo "[cluster-init] WARNING: patching $conf: $cur → $WANT (rebuild to make permanent)"
  sed -i "s,${cur},${WANT},g" "$conf"
fi
PATCHEOF
chmod +x "$_PATCH_DRBD"
bash "$_PATCH_DRBD" "$DRBD_DISK"
n2_scp "$_PATCH_DRBD" "/tmp/patch-drbd-disk.sh"
n2_ssh "bash /tmp/patch-drbd-disk.sh ${DRBD_DISK}"
n2_ssh "rm -f /tmp/patch-drbd-disk.sh"
rm -f "$_PATCH_DRBD"

log "Initialising DRBD metadata on $NODE1..."
# Use drbdmeta --force directly for BOTH create-md and write-dev-uuid.
# drbdadm create-md --force passes --force to drbdmeta create-md but NOT to
# the write-dev-uuid sub-call it makes internally, so write-dev-uuid fails when
# the backing disk is still busy and stdin is not a TTY:
# "stdin not a TTY, not waiting for confirmation" → exit 20.
# Calling drbdmeta --force directly bypasses the exclusive-open confirmation on
# both steps without needing a TTY, regardless of whether the device is busy.
# Skip metadata creation only if DRBD is UP and fully synced (UpToDate/UpToDate).
# When the resource is down, drbdadm dstate reads metadata and returns just
# "UpToDate" (no slash) — that must not be treated as "already synced".
# Mismatched UUIDs from an interrupted sync cause instant WFConnection→StandAlone,
# so we always recreate metadata unless the sync is genuinely complete.
if [[ "$(drbdadm dstate ha-data 2>/dev/null)" != "UpToDate/UpToDate" ]]; then
  UUID1=$(_rand_uuid)
  drbdmeta --force 0 v08 "${DRBD_DISK}" internal create-md
  drbdmeta --force 0 v08 "${DRBD_DISK}" internal write-dev-uuid "$UUID1"
fi

log "Initialising DRBD metadata on $NODE2..."
if [[ "$(n2_ssh "drbdadm dstate ha-data 2>/dev/null" 2>/dev/null)" != "UpToDate/UpToDate" ]]; then
  UUID2=$(n2_ssh "cat /proc/sys/kernel/random/uuid 2>/dev/null | tr -d '-' | cut -c1-16 | tr '[:lower:]' '[:upper:]'")
  n2_ssh "drbdmeta --force 0 v08 ${DRBD_DISK} internal create-md"
  n2_ssh "drbdmeta --force 0 v08 ${DRBD_DISK} internal write-dev-uuid ${UUID2}"
fi

log "Bringing up DRBD on both nodes..."
drbdadm up ha-data 2>/dev/null || true
n2_ssh "drbdadm up ha-data" 2>/dev/null || true

log "Forcing $NODE1 to DRBD Primary for initial sync..."
drbdadm primary ha-data --force
# NOTE: Pacemaker standby is intentionally kept ON until after the sync
# completes.  Clearing it here races with the OCF DRBD agent: Pacemaker
# sees DRBD in WFConnection/SyncSource and may call drbdadm-down thinking
# something went wrong, killing the sync.  Standby is cleared below, after
# UpToDate/UpToDate is confirmed.

log "Waiting for DRBD initial sync to complete (32 GB may take 10–20 min)..."
log "  (monitor with: watch -n3 cat /proc/drbd)"
_sync_chars=('|' '/' '-' $'\\')
_sync_iter=0
while true; do
  _dstate=$(drbdadm dstate ha-data 2>/dev/null || echo "unknown")
  if echo "$_dstate" | grep -q "UpToDate/UpToDate"; then
    printf "\r%-80s\r" ""
    log "DRBD initial sync complete (dstate: $_dstate)"
    break
  fi
  # Parse connection state from /proc/drbd (cs:SyncSource, cs:Connected, cs:StandAlone …)
  _cs=$(grep -oE 'cs:[A-Za-z]+' /proc/drbd 2>/dev/null | head -1 | sed 's/cs://' || echo "unknown")
  # /proc/drbd uses variable whitespace: "sync'ed:  5.2%" (two spaces).
  _pct=$(grep -oE "sync'ed:[[:space:]]+[0-9.]+" /proc/drbd 2>/dev/null | grep -oE "[0-9.]+" | head -1 || echo "")
  _eta=$(grep -oE "finish:[[:space:]]+[0-9:]+" /proc/drbd 2>/dev/null | grep -oE "[0-9:]+$" | head -1 || echo "")
  _spd=$(grep -oE "speed:[[:space:]]+[0-9,]+" /proc/drbd 2>/dev/null | grep -oE "[0-9,]+$" | head -1 || echo "")
  _sync_iter=$(( _sync_iter + 1 ))
  _sc="${_sync_chars[$_sync_iter % 4]}"
  if [[ "$_cs" == "StandAlone" && $_sync_iter -gt 5 ]]; then
    printf "\r%-80s\r" ""
    die "DRBD is StandAlone after 15 s — peer connection lost (dstate: $_dstate). " \
        "Check corosync/network and re-run cluster-init."
  elif [[ -n "$_pct" ]]; then
    printf "\r  [%s] syncing: %s%% done — ETA %s @ %s K/s     " \
      "$_sc" "$_pct" "${_eta:-??:??:??}" "${_spd:-?}"
  else
    printf "\r  [%s] cs:%s dstate:%s — waiting for sync to start     " "$_sc" "$_cs" "$_dstate"
  fi
  sleep 3
done

log "Disabling Pacemaker maintenance-mode and clearing standby — handing DRBD back to Pacemaker..."
crm_attribute -t crm_config -n maintenance-mode -v false 2>/dev/null || true
crm_standby -N "$NODE1" -v off 2>/dev/null || true
crm_standby -N "$NODE2" -v off 2>/dev/null || true

# ── 3. XFS filesystem ─────────────────────────────────────────────────────
log "Creating XFS on ${DRBD_DEVICE}..."
if ! xfs_info "${DRBD_DEVICE}" &>/dev/null; then
  mkfs.xfs -f "${DRBD_DEVICE}"
fi

log "Mounting ${DRBD_DEVICE} at ${XFS_MOUNT}..."
mkdir -p "${XFS_MOUNT}"
mountpoint -q "${XFS_MOUNT}" || mount "${DRBD_DEVICE}" "${XFS_MOUNT}"

# ── 4. NFS dataset directories ────────────────────────────────────────────
log "Creating NFS dataset directories..."
for subdir in "${NFS_SUBDIRS[@]}"; do
  mkdir -p "${XFS_MOUNT}/${subdir}"
done

# ── 5. iSCSI LUN backing file ─────────────────────────────────────────────
log "Creating iSCSI LUN backing file ${ISCSI_LUN_FILE} (${ISCSI_LUN_SIZE})..."
if [[ ! -f "${ISCSI_LUN_FILE}" ]]; then
  fallocate -l "${ISCSI_LUN_SIZE}" "${ISCSI_LUN_FILE}"
fi

# ── 6. LIO iSCSI target ───────────────────────────────────────────────────
log "Configuring LIO iSCSI target via targetcli..."
# Note: do NOT bind portal to ${VIP} here — the VIP isn't assigned yet (Pacemaker
# creates it).  The default portal (all IPs, port 3260) is correct; Pacemaker's
# VIP resource will make the target reachable at the VIP address.
#
# Clear any existing LIO state first (idempotent: re-run after a partial failure).
# Use specific delete commands — clearconfig does not reliably clear kernel state.
if ls /sys/kernel/config/target/iscsi/ 2>/dev/null | grep -q "${ISCSI_IQN}"; then
  log "Clearing existing LIO target ${ISCSI_IQN} before reconfiguration..."
  targetcli "/iscsi delete ${ISCSI_IQN}" 2>/dev/null || true
fi
if ls /sys/kernel/config/target/core/ 2>/dev/null | grep -q "fileio"; then
  log "Clearing existing LIO backstore ha-lun0 before reconfiguration..."
  targetcli "/backstores/fileio delete ha-lun0" 2>/dev/null || true
fi
targetcli <<EOF
/backstores/fileio create name=ha-lun0 file_or_dev=${ISCSI_LUN_FILE} size=0 write_back=false
/iscsi create ${ISCSI_IQN}
/iscsi/${ISCSI_IQN}/tpg1/luns create /backstores/fileio/ha-lun0
/iscsi/${ISCSI_IQN}/tpg1 set attribute authentication=0
/iscsi/${ISCSI_IQN}/tpg1 set attribute demo_mode_write_protect=0
saveconfig /etc/target/saveconfig.json
EOF

log "Tearing down LIO kernel objects — Pacemaker will restore via targetctl on the Active node..."
# LIO holds the backing file open; clear kernel state now so the XFS unmount succeeds.
# Use specific delete commands (clearconfig does not reliably clear kernel configfs state).
targetcli "/iscsi delete ${ISCSI_IQN}" 2>/dev/null || warn "LIO iscsi delete failed — umount may fail"
targetcli "/backstores/fileio delete ha-lun0" 2>/dev/null || warn "LIO backstore delete failed"

log "Distributing iSCSI saveconfig to $NODE2..."
n2_scp /etc/target/saveconfig.json /etc/target/saveconfig.json


log "Unmounting ${XFS_MOUNT} — Pacemaker manages it..."
umount "${XFS_MOUNT}" || { sync; umount -l "${XFS_MOUNT}"; }

log "Demoting DRBD to Secondary — Pacemaker manages primary role..."
drbdadm role ha-data 2>/dev/null | grep -q "^Primary" && drbdadm secondary ha-data || true

# ── 7. Pacemaker resources ────────────────────────────────────────────────
log "Configuring Pacemaker cluster properties..."
crm_attribute -t crm_config -n stonith-enabled -v false
crm_attribute -t crm_config -n no-quorum-policy -v ignore

log "Creating Pacemaker resources via cibadmin..."
# Use cibadmin --replace with pacemaker-4.0-compatible XML.
# Key schema rules for pacemaker-4.0:
#   - globally-unique must be in <meta_attributes>, not a direct <clone> attribute
#   - promoted-max / promoted-node-max (not master-max / master-node-max)
#   - constraint with-rsc-role="Promoted" (not "Master")
cibadmin --replace --scope resources --xml-text '<resources>
  <clone id="ms-drbd0">
    <meta_attributes id="ms-drbd0-meta">
      <nvpair id="ms-drbd0-globally-unique" name="globally-unique" value="false"/>
      <nvpair id="ms-drbd0-promotable" name="promotable" value="true"/>
      <nvpair id="ms-drbd0-promoted-max" name="promoted-max" value="1"/>
      <nvpair id="ms-drbd0-promoted-node-max" name="promoted-node-max" value="1"/>
      <nvpair id="ms-drbd0-clone-max" name="clone-max" value="2"/>
      <nvpair id="ms-drbd0-clone-node-max" name="clone-node-max" value="1"/>
      <nvpair id="ms-drbd0-notify" name="notify" value="true"/>
      <nvpair id="ms-drbd0-interleave" name="interleave" value="true"/>
    </meta_attributes>
    <primitive id="drbd0" class="ocf" type="drbd" provider="linbit">
      <instance_attributes id="drbd0-attrs">
        <nvpair id="drbd0-resource" name="drbd_resource" value="ha-data"/>
      </instance_attributes>
      <operations>
        <op id="drbd0-start" name="start" interval="0" timeout="240s"/>
        <op id="drbd0-stop" name="stop" interval="0" timeout="120s"/>
        <op id="drbd0-promote" name="promote" interval="0" timeout="240s"/>
        <op id="drbd0-demote" name="demote" interval="0" timeout="90s"/>
        <op id="drbd0-monitor-promoted" name="monitor" interval="20s" timeout="20s" role="Promoted"/>
        <op id="drbd0-monitor-unpromoted" name="monitor" interval="30s" timeout="20s" role="Unpromoted"/>
      </operations>
    </primitive>
  </clone>
  <group id="ha-group">
    <primitive id="xfs-data" class="ocf" type="Filesystem" provider="heartbeat">
      <instance_attributes id="xfs-data-attrs">
        <nvpair id="xfs-data-device" name="device" value="/dev/drbd0"/>
        <nvpair id="xfs-data-directory" name="directory" value="/srv/ha-data"/>
        <nvpair id="xfs-data-fstype" name="fstype" value="xfs"/>
        <nvpair id="xfs-data-options" name="options" value="defaults"/>
        <nvpair id="xfs-data-force_unmount" name="force_unmount" value="true"/>
      </instance_attributes>
      <operations>
        <op id="xfs-data-start" name="start" interval="0" timeout="60s"/>
        <op id="xfs-data-stop" name="stop" interval="0" timeout="60s"/>
        <op id="xfs-data-monitor" name="monitor" interval="20s" timeout="40s"/>
      </operations>
    </primitive>
    <primitive id="iscsi-target" class="systemd" type="targetctl">
      <operations>
        <op id="iscsi-start" name="start" interval="0" timeout="60s"/>
        <op id="iscsi-stop" name="stop" interval="0" timeout="60s"/>
        <op id="iscsi-monitor" name="monitor" interval="20s" timeout="40s"/>
      </operations>
    </primitive>
    <primitive id="nfs-server" class="systemd" type="nfs-server">
      <operations>
        <op id="nfs-start" name="start" interval="0" timeout="60s"/>
        <op id="nfs-stop" name="stop" interval="0" timeout="60s"/>
        <op id="nfs-monitor" name="monitor" interval="30s" timeout="40s"/>
      </operations>
    </primitive>
    <primitive id="vip-storage" class="ocf" type="IPaddr2" provider="heartbeat">
      <instance_attributes id="vip-storage-attrs">
        <nvpair id="vip-storage-ip" name="ip" value="192.168.20.229"/>
        <nvpair id="vip-storage-cidr" name="cidr_netmask" value="24"/>
        <nvpair id="vip-storage-nic" name="nic" value="ens20"/>
      </instance_attributes>
      <operations>
        <op id="vip-storage-start" name="start" interval="0" timeout="20s"/>
        <op id="vip-storage-stop" name="stop" interval="0" timeout="20s"/>
        <op id="vip-storage-monitor" name="monitor" interval="10s" timeout="20s"/>
      </operations>
    </primitive>
    <primitive id="vip-lan" class="ocf" type="IPaddr2" provider="heartbeat">
      <instance_attributes id="vip-lan-attrs">
        <nvpair id="vip-lan-ip" name="ip" value="192.168.2.229"/>
        <nvpair id="vip-lan-cidr" name="cidr_netmask" value="24"/>
        <nvpair id="vip-lan-nic" name="nic" value="ens18"/>
      </instance_attributes>
      <operations>
        <op id="vip-lan-start" name="start" interval="0" timeout="20s"/>
        <op id="vip-lan-stop" name="stop" interval="0" timeout="20s"/>
        <op id="vip-lan-monitor" name="monitor" interval="10s" timeout="20s"/>
      </operations>
    </primitive>
  </group>
</resources>'

log "Adding Pacemaker ordering and colocation constraints..."
cibadmin --replace --scope constraints --xml-text '<constraints>
  <rsc_order id="order-drbd-group" first="ms-drbd0" first-action="promote" then="ha-group" then-action="start" kind="Mandatory"/>
  <rsc_colocation id="coloc-group-with-drbd" score="INFINITY" rsc="ha-group" with-rsc="ms-drbd0" with-rsc-role="Promoted"/>
</constraints>'

log "Clearing stale Pacemaker failure history..."
crm_resource --cleanup 2>/dev/null || true

log "Waiting for resources to start..."
for i in $(seq 1 60); do
  if crm_resource -r vip-storage --locate 2>/dev/null | grep -q "running on"; then
    log "VIPs are up: $(crm_resource -r vip-storage --locate)"
    break
  fi
  [[ $i -eq 60 ]] && { warn "VIPs not up after 120 s — check: crm_mon -1"; break; }
  sleep 2
done

log ""
log "═══════════════════════════════════════════════════════════════"
log " HA cluster initialised."
log ""
log "  crm_mon -1                               — cluster status"
log "  iscsiadm -m discovery -t st -p ${VIP}       — verify iSCSI (storage net)"
log "  iscsiadm -m discovery -t st -p ${VIP_LAN}   — verify iSCSI (LAN)"
log "  showmount -e ${VIP}                          — verify NFS exports (storage net)"
log "  showmount -e ${VIP_LAN}                      — verify NFS exports (LAN)"
log ""
log "  To enable STONITH (after deploying fence SSH key):"
log "    1. Fill in VMID_NODE1 / VMID_NODE2 in cluster-enable-stonith.sh"
log "    2. Copy scripts/ha/fence-pve-ssh.py to /etc/pacemaker/fence_pve_ssh"
log "       on both nodes (chmod +x)"
log "    3. Generate and distribute the fence SSH key"
log "       (see docs or cluster-enable-stonith.sh header)"
log "    4. bash scripts/ha/cluster-enable-stonith.sh"
log "═══════════════════════════════════════════════════════════════"