Generalize the remote tooling check to a list of required commands

Per-run tooling verification (added in the previous commit) was hardcoded
to checking just `nix`. Turn it into a small array instead, so a future
remote build step needing another tool extends that list rather than
growing a second parallel check.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>

AGENTS.md

@@ -7,7 +7,7 @@ servers and workstation.
 
 The flake exposes NixOS configurations named `<platform>-<buildtype>`
 (platforms: `linode`, `proxmox`, `lxc`; build types: `minimal`, `nix-cache`,
-`server`, `docker`, `gui`, `pxe-boot`, `tailscale-exit-node`), generated from `modules/platforms/*`
+`server`, `docker`, `gui`, `pxe-boot`, `tailscale-exit-node`, `tor-relay`), generated from `modules/platforms/*`
 and `modules/build-types/*` by the `mkTarget` function in `flake.nix`. Not
 every combination is built — `pxe-boot` has no `linode` variant. See
 `README.md` for the full current target list; treat `flake.nix` as the

CLAUDE.md

@@ -160,9 +160,10 @@ nixosSystem {
 ```
 
 Platforms: `linode`, `proxmox`, `lxc`. Build types: `minimal`, `nix-cache`,
-`server`, `docker`, `gui`, `pxe-boot`, `tailscale-exit-node`. Not every
-combination is built — e.g. `pxe-boot` has no `linode` variant (PXE/DHCP/TFTP
-need LAN L2 adjacency a Linode VPS doesn't have). Treat `flake.nix`'s
+`server`, `docker`, `gui`, `pxe-boot`, `tailscale-exit-node`, `tor-relay`. Not
+every combination is built — e.g. `pxe-boot` has no `linode` variant
+(PXE/DHCP/TFTP need LAN L2 adjacency a Linode VPS doesn't have), and
+`tor-relay` currently only exists as `lxc-tor-relay`. Treat `flake.nix`'s
 `generatedTargets` as the source
 of truth for which hosts exist — `README.md`, `AGENTS.md`,
 `docs/flake-lock-automation.md`, and the CI eval workflows
@@ -190,7 +191,7 @@ removing a host.
   `vzdump` backup-archive metadata this doesn't have), no install step —
   see `docs/auto-installer.md`.
 - `modules/build-types/*.nix` — what a system is for:
-  minimal/server/docker/gui/pxe-boot/nix-cache/tailscale-exit-node.
+  minimal/server/docker/gui/pxe-boot/nix-cache/tailscale-exit-node/tor-relay.
 - `modules/common/configuration.nix` — base NixOS config imported by every
   host: locale, users, nix settings, git.
 - `modules/common/home.nix` / `hosts/nixos/home.nix` — Home Manager config for
@@ -225,7 +226,8 @@ removing a host.
   and `environmentFile`; used by `hosts/server/host.nix` and
   `hosts/nix-cache/host.nix` to avoid duplicating that boilerplate.
 - `modules/tailscale/`, `modules/docker/`, `modules/networking/`,
-  `modules/traefik/`, `modules/services/*` — single-purpose, single-host
+  `modules/traefik/`, `modules/tor/`, `modules/services/*` — single-purpose,
+  single-host
   feature modules (e.g. `docker/enable-service.nix`,
   `services/zfs/enable-service.nix`). Grep `modules/build-types/*.nix` for
   each build type's `imports` list to see which modules apply where.

README.md

@@ -10,11 +10,11 @@ pieces composed in `flake.nix`:
 
 - **Platforms** (what it runs on): `linode`, `proxmox`, `lxc`
 - **Build types** (what it's for): `minimal`, `nix-cache`, `server`, `docker`,
-  `gui`, `pxe-boot`, `tailscale-exit-node`
+  `gui`, `pxe-boot`, `tailscale-exit-node`, `tor-relay`
 
 Not every combination exists — `pxe-boot` has no `linode` variant, since
-PXE/DHCP/TFTP need LAN L2 adjacency that a Linode VPS doesn't have. The full
-list:
+PXE/DHCP/TFTP need LAN L2 adjacency that a Linode VPS doesn't have, and
+`tor-relay` currently only exists as `lxc-tor-relay`. The full list:
 
 | Target | Purpose |
 | --- | --- |
@@ -27,6 +27,7 @@ list:
 | `linode-gui` / `proxmox-gui` / `lxc-gui` | Cinnamon desktop workstation — previously the flat `nixos` target |
 | `proxmox-pxe-boot` / `lxc-pxe-boot` | HTTP/iPXE boot asset host — previously the flat `pxe-boot` target |
 | `linode-tailscale-exit-node` / `proxmox-tailscale-exit-node` / `lxc-tailscale-exit-node` | Tailscale exit node |
+| `lxc-tor-relay` | Tor middle relay |
 
 Which variant of a given buildtype is actually deployed isn't tracked
 anywhere in this repo — that's live infrastructure state, not something a

docs/auto-installer.md

@@ -19,7 +19,7 @@ see "LXC hosts" immediately below for why those are different.**
 ## LXC hosts
 
 `lxc-*` targets (`lxc-minimal`, `lxc-nix-cache`, `lxc-server`, `lxc-docker`,
-`lxc-gui`, `lxc-pxe-boot`, `lxc-tailscale-exit-node`) are **not** installed via `auto-install.sh` — the
+`lxc-gui`, `lxc-pxe-boot`, `lxc-tailscale-exit-node`, `lxc-tor-relay`) are **not** installed via `auto-install.sh` — the
 interactive menu deliberately excludes them. Don't try to select one there;
 `nixos-install` would bind-mount `/` onto `/mnt` (LXC containers have no raw
 disk to partition) and then refuse to touch the filesystem it's currently

flake-target-refactor-spec.md

@@ -1,151 +0,0 @@
-# Spec: Refactor Flake Targets into Platform × Build-Type Matrix
-
-**Status: implemented.** `flake.nix`'s `generatedTargets`/`mkTarget` and
-`modules/platforms/*`/`modules/build-types/*` are the result of this spec —
-kept here for historical rationale only (referenced from `CLAUDE.md`'s
-"Composition pattern" section), not as an active or open plan. The "Open
-Questions" below were resolved during implementation; don't treat them as
-outstanding. A `tailscale-exit-node` build type was added later, beyond this
-spec's original scope.
-
-## Context
-
-The flake at `~/nixos` currently defines these output targets (flat, ad-hoc naming):
-
-- `docker`
-- `linode-minimal`
-- `nix-cache`
-- `nix-minimal`
-- `nixos`
-- `server`
-- `pxe-boot`
-
-Some already follow a `platform-buildtype` convention (`linode-minimal`), most don't.
-`~/nix-auto-installer` is a related repo and should be checked for any coupling to
-these target names (scripts, docs, CI, or install automation that reference them by
-name) before renaming anything.
-
-## Goal
-
-Restructure the flake so targets are generated from two orthogonal concepts:
-
-**Build types** (what the system is for):
-- `minimal`
-- `nix-cache`
-- `server`
-- `docker`
-- `pxe-boot`
-- `gui`
-
-**Platforms** (what it's deployed on):
-- `linode` (Linode VM)
-- `proxmox` (Proxmox VM)
-- `lxc` (Proxmox LXC container)
-
-Final targets should be named consistently as `<platform>-<buildtype>`, e.g.:
-
-```
-linode-minimal    proxmox-minimal    lxc-minimal
-linode-nix-cache  proxmox-nix-cache  lxc-nix-cache
-linode-server     proxmox-server     lxc-server
-linode-docker     proxmox-docker     lxc-docker
-linode-pxe-boot   proxmox-pxe-boot   lxc-pxe-boot
-linode-gui        proxmox-gui        lxc-gui
-```
-
-That's the full matrix (18 targets) if every build type applies to every platform.
-See **Open Questions** below — some combinations may not make sense and should be
-confirmed with me before being built out, not silently included or dropped.
-
-## Migration mapping (old → new)
-
-| Old target        | New target                                          | Notes |
-|--------------------|------------------------------------------------------|-------|
-| `linode-minimal`   | `linode-minimal`                                      | Already correct, keep as-is |
-| `nix-minimal`      | likely `proxmox-minimal` or a platform-less base module | Ambiguous — see Open Questions |
-| `nix-cache`        | base module consumed by `linode-nix-cache`, `proxmox-nix-cache`, `lxc-nix-cache` | Currently platform-less; needs to become a build-type module, not a standalone target |
-| `server`           | base module consumed by `linode-server`, `proxmox-server`, `lxc-server` | Same as above |
-| `docker`           | base module consumed by `linode-docker`, `proxmox-docker`, `lxc-docker` | Confirm docker actually makes sense as an LXC/VM guest build vs. a standalone container image — see Open Questions |
-| `pxe-boot`         | TBD — may stay a single target rather than a per-platform one | See Open Questions |
-| `nixos`            | TBD — unclear what this maps to in the new scheme | See Open Questions |
-
-## Open Questions (Claude Code: raise these with me before implementing, don't guess)
-
-1. **`nixos` target** — what is this currently used for (bare metal install, dev
-   shell, template)? It doesn't obviously map to any of the six build types.
-2. **`nix-minimal` vs `linode-minimal`** — are these two different things, or is
-   `nix-minimal` a leftover/duplicate?
-3. **`pxe-boot` and `gui` across all three platforms** — does PXE boot make sense
-   for an LXC container or a cloud VM (Linode), or is it inherently bare-metal/
-   network-boot only and should remain a single non-platform target? Does `gui`
-   make sense inside an LXC container?
-4. **`docker` as a build type** — is this "a NixOS host configured to run Docker"
-   (which would sensibly have linode/proxmox/lxc variants), or "a Docker container
-   image built by the flake" (which wouldn't take a platform prefix at all, since
-   it doesn't run on Linode/Proxmox/LXC as a guest OS)? These are structurally
-   different and change how it should be wired in.
-5. Confirm whether all 18 combinations should actually exist, or whether this is
-   meant to produce only the combinations that are genuinely useful (e.g. maybe no
-   one needs `lxc-pxe-boot`).
-
-## Implementation approach
-
-1. **Inventory first.** Read the current `flake.nix` and any `nixosConfigurations`/
-   `modules` structure. Map every existing target to what module(s) it actually
-   pulls in. Don't assume — confirm against the real file contents.
-2. **Separate build-type and platform into their own module directories**, e.g.:
-   ```
-   modules/build-types/minimal.nix
-   modules/build-types/nix-cache.nix
-   modules/build-types/server.nix
-   modules/build-types/docker.nix
-   modules/build-types/pxe-boot.nix
-   modules/build-types/gui.nix
-
-   modules/platforms/linode.nix
-   modules/platforms/proxmox.nix
-   modules/platforms/lxc.nix
-   ```
-   Build-type modules should contain only what makes a system "minimal" vs
-   "server" vs "gui", etc. Platform modules should contain only what's specific
-   to running as a Linode VM vs Proxmox VM vs LXC container (virtualisation
-   guest tools, boot method, filesystem/image format, LXC-specific constraints
-   like no kernel modules, etc).
-3. **Generate the target matrix programmatically** in `flake.nix` rather than
-   hand-writing 18 near-identical `nixosConfigurations` entries — e.g. a small
-   function that takes a platform name and build-type name, composes the two
-   modules plus any shared base module, and produces the named output. This
-   keeps future build types/platforms a one-line addition rather than a copy-paste
-   job.
-4. **Only build combinations we've confirmed make sense** (see Open Questions) —
-   don't emit all 18 by default if some are structurally invalid.
-5. **Preserve existing working configs during the transition.** Don't delete the
-   old target names until their replacements build successfully — rename/alias
-   at the end, not the start, so there's no window where the flake is broken.
-
-## Verification
-
-For every new target produced:
-```bash
-nix flake check
-nix build .#nixosConfigurations.<target>.config.system.build.toplevel
-```
-Confirm each builds without evaluation errors before considering it done. If a
-target fails to build, report which one and why rather than silently skipping it.
-
-## Deliverables
-
-- Refactored `flake.nix` using the composed module + generated-matrix approach.
-- New `modules/build-types/*.nix` and `modules/platforms/*.nix` files.
-- Old flat target names removed only after their replacements are verified.
-- A short `README.md` (or section in existing docs) listing the final target
-  names and what each one is for.
-- A summary at the end of what changed, what was removed, and any of the Open
-  Questions above that got resolved differently than expected.
-
-## Out of scope
-
-- Don't touch `~/nix-auto-installer` contents beyond checking it for references
-  to the old target names — if changes there are needed, flag them, don't make
-  them without confirming.
-- Don't add new build types or platforms beyond the ones listed here.

flake.nix

@@ -98,6 +98,8 @@
         linode-tailscale-exit-node = mkTarget { platform = "linode"; buildType = "tailscale-exit-node"; hostPath = ./hosts/tailscale-exit-node/host.nix; };
         proxmox-tailscale-exit-node = mkTarget { platform = "proxmox"; buildType = "tailscale-exit-node"; hostPath = ./hosts/tailscale-exit-node/host.nix; };
         lxc-tailscale-exit-node = mkTarget { platform = "lxc"; buildType = "tailscale-exit-node"; hostPath = ./hosts/tailscale-exit-node/host.nix; };
+
+        lxc-tor-relay = mkTarget { platform = "lxc"; buildType = "tor-relay"; hostPath = ./hosts/tor-relay/host.nix; };
       };
 
       # Auto-install environments (migrated from the former nix-auto-installer

hosts/tor-relay/host.nix

@@ -0,0 +1,12 @@
+_:
+
+{
+  networking.hostName = "tor-relay";
+
+  # No networking.hostId: only ZFS-touching hosts (server, docker) need one
+  # for pool-import safety, and this host does neither.
+
+  # A genuinely new host (not a pre-refactor carry-over), so it tracks the
+  # flake's current nixpkgs release rather than being pinned to an older one.
+  system.stateVersion = "26.05";
+}

modules/build-types/tor-relay.nix

@@ -0,0 +1,7 @@
+{ ... }:
+
+{
+  imports = [
+    ../tor/enable-relay.nix
+  ];
+}

modules/docker/mount-data.nix

@@ -1,5 +1,15 @@
 { config, lib, pkgs, vars, ... }:
 
+let
+  # `x-systemd.automount` never works inside a Linux container (LXC
+  # included, regardless of privilege) -- confirmed live on lxc-docker:
+  # systemd logs "Starting of <unit>.automount unsupported" for every
+  # share and never mounts them. Mount eagerly there instead, with
+  # `nofail` so a boot with the NFS server unreachable doesn't hang
+  # (the VM platforms rely on automount itself to get that same
+  # non-blocking behavior, so they don't need `nofail` too).
+  automountOpts = if config.boot.isContainer then [ "nofail" ] else [ "x-systemd.automount" ];
+in
 {
   fileSystems = {
     ${vars.nfsShares.dockerConfig.mountpoint} = {
@@ -9,9 +19,8 @@
       options = [
         "nfsvers=4.2"
         "_netdev"
-        "x-systemd.automount"
         "noatime"
-      ];
+      ] ++ automountOpts;
     };
 
     ${vars.nfsShares.dockerDatabases.mountpoint} = {
@@ -21,9 +30,8 @@
       options = [
         "nfsvers=4.2"
         "_netdev"
-        "x-systemd.automount"
         "noatime"
-      ];
+      ] ++ automountOpts;
     };
 
     ${vars.nfsShares.dockerVolumes.mountpoint} = {
@@ -33,9 +41,8 @@
       options = [
         "nfsvers=4.2"
         "_netdev"
-        "x-systemd.automount"
         "noatime"
-      ];
+      ] ++ automountOpts;
     };
 
     ${vars.nfsShares.nextcloudData.mountpoint} = {
@@ -45,9 +52,8 @@
       options = [
         "nfsvers=4.2"
         "_netdev"
-        "x-systemd.automount"
         "noatime"
-      ];
+      ] ++ automountOpts;
     };
 
     ${vars.nfsShares.raspiVolumes.mountpoint} = {
@@ -57,9 +63,8 @@
       options = [
         "nfsvers=4.2"
         "_netdev"
-        "x-systemd.automount"
         "noatime"
-      ];
+      ] ++ automountOpts;
     };
   };
 }

modules/raspi/mount-data.nix

@@ -1,4 +1,4 @@
-{ vars, ... }:
+{ config, lib, vars, ... }:
 
 {
   fileSystems.${vars.raspiMountpoint} = {
@@ -9,6 +9,15 @@
       "_netdev"
       "noatime"
 
+      # Explicitly use NFSv4.2 if supported
+      "nfsvers=4.2"
+    ] ++ lib.optionals (!config.boot.isContainer) [
+      # `x-systemd.automount` never works inside a Linux container (LXC
+      # included) -- confirmed live on lxc-docker: systemd logs "Starting
+      # of <unit>.automount unsupported" and never mounts it. `nofail`
+      # above already keeps boot non-blocking there, so plain eager
+      # mounting is fine.
+
       # Don't mount until first access
       "x-systemd.automount"
 
@@ -17,9 +26,6 @@
 
       # Give the Pi/Tailscale a little time to appear
       "x-systemd.device-timeout=10s"
-
-      # Explicitly use NFSv4.2 if supported
-      "nfsvers=4.2"
     ];
   };
 

modules/tor/enable-relay.nix

@@ -0,0 +1,35 @@
+{ pkgs, vars, ... }:
+
+{
+  services.tor = {
+    enable = true;
+
+    # Opens settings.ORPort (and DirPort, unset here) in the firewall —
+    # see the nixpkgs tor module's own networking.firewall.mkIf block.
+    openFirewall = true;
+
+    relay = {
+      enable = true;
+      # Plain middle/guard relay, not "exit" — relays onion traffic between
+      # other Tor nodes without ever making requests to the public internet
+      # on a user's behalf, avoiding the abuse complaints and legal exposure
+      # an exit node invites.
+      role = "relay";
+    };
+
+    settings.ORPort = vars.ports.torRelayOrPort;
+
+    # Unix control socket at /run/tor/control (GroupWritable, group "tor")
+    # -- what nyx below actually monitors the relay through. Nyx's own
+    # default control-socket path (/var/run/tor/control) resolves to the
+    # same place, so no extra nyx config is needed.
+    controlSocket.enable = true;
+  };
+
+  # Lets the primary user's shell session read/write the control socket
+  # above without being root -- otherwise nyx fails to authenticate against
+  # it at all.
+  users.users.${vars.primaryUser}.extraGroups = [ "tor" ];
+
+  environment.systemPackages = [ pkgs.nyx ];
+}

remove-sensetive-info-refactor.md

@@ -1,146 +0,0 @@
-# Spec: Remove Sensitive Information from NixOS Flake
-
-## Goal
-
-Every secret currently readable in plaintext anywhere in this repo (working tree *and* git history) gets removed, replaced with `sops-nix`-managed encrypted references, and rotated. When this is done, the repo should be safe to make public without exposing anything about the systems it configures.
-
-Treat this as three sequential milestones. Do not start git history rewriting (Milestone 3) until Milestones 1 and 2 are fully verified and the flake still builds. This should be its own branch (`refactor/secrets`) until fully verified, then merged.
-
----
-
-## Milestone 1 — Audit
-
-Before touching anything, produce a complete inventory. Do not guess at scope — grep the whole tree and the whole history.
-
-1. Run a secret scanner across the working tree and full history. Use both, since they catch different things:
-   - `gitleaks detect --source . -v --log-opts="--all"` (scans history too)
-   - `trufflehog git file://. --since-commit=$(git rev-list --max-parents=0 HEAD) --only-verified=false`
-   If neither is installed, add them via a temporary `nix-shell -p gitleaks trufflehog` — don't install anything globally on the host.
-
-2. Manually grep for the categories below, since scanners miss config-specific patterns:
-   - `hashedPassword`, `password`, `initialPassword`, `initialHashedPassword` in any `users.users.*` block
-   - `age.secrets`, `sops.secrets` (if any partial secrets work already exists — check for it)
-   - PSK / `preSharedKey`, `privateKeyFile` inline values (vs. file references) for WireGuard
-   - `authKey`, `apiToken`, `api_key`, `token =`, `secret =` in service modules (Tailscale, Cloudflare, backup tools, etc.)
-   - SSH private key material: search for `BEGIN OPENSSH PRIVATE KEY` / `BEGIN RSA PRIVATE KEY` literals
-   - TLS cert/key pairs committed under e.g. `secrets/`, `certs/`, `pki/`
-   - Real name, personal email, home address, or anything in comments/hostnames that maps a machine to your physical identity or network layout (e.g. hostnames like `wayne-desktop`, static LAN IPs, ISP-identifying info)
-   - `.env` files, `secrets.nix`, `secrets.yaml`, or any file that looks like it was meant to be gitignored but wasn't
-
-3. Produce `secrets-inventory.md` (temporary, delete before finishing) listing: file path, line, secret type, and which host/service it belongs to. This becomes the checklist for Milestone 2 — every row must be either migrated to sops or deleted, with nothing left unaccounted for.
-
----
-
-## Milestone 2 — Migrate to sops-nix
-
-### 2.1 Set up sops-nix
-
-1. Add the flake input:
-   ```nix
-   sops-nix.url = "github:Mic92/sops-nix";
-   sops-nix.inputs.nixpkgs.follows = "nixpkgs";
-   ```
-2. Import `sops-nix.nixosModules.sops` into each host's module list (or into a shared `common.nix` if all hosts use it).
-3. Generate an age keypair **per host** (not one shared key for everything — a compromised host shouldn't decrypt every other host's secrets):
-   ```
-   nix-shell -p age --run "age-keygen -o /var/lib/sops-nix/key.txt"
-   ```
-   Print the public key (`age-keygen -y`) for each host — you'll need it for `.sops.yaml`.
-4. Also generate one age key for yourself (your admin workstation) so you can edit secrets without needing to SSH into a host: store it at `~/.config/sops/age/keys.txt`, back it up somewhere outside this repo (password manager, offline). **If this key is lost, every secret encrypted with it is unrecoverable — losing the age key is equivalent to losing the secrets.**
-5. Create `.sops.yaml` at the repo root defining creation rules: which age public keys can decrypt which secrets files, keyed by path regex, so e.g. `secrets/hostA.yaml` is decryptable by your admin key + hostA's key, `secrets/hostB.yaml` by your admin key + hostB's key.
-
-### 2.2 Migrate each secret category from the inventory
-
-For each row in `secrets-inventory.md`:
-
-- **Password hashes**: generate hash with `mkpasswd -m sha-512` (or `bcrypt` if your setup wants that), store under `sops.secrets."<name>/hashedPassword"`, reference via `users.users.<name>.hashedPasswordFile = config.sops.secrets."<name>/hashedPassword".path;`. Do not put the *plaintext* password anywhere, only the hash, and only the hash goes into the encrypted sops file.
-- **API tokens / auth keys**: move the raw value into the per-host sops YAML, reference in the module via `config.sops.secrets."<service>/token".path` — most NixOS service modules that take a token also accept a `*File` variant (e.g. `environmentFile`, `tokenFile`); use that instead of passing the value directly.
-- **Private keys / certs**: move the PEM/key content wholesale into a sops secret, output as a file with appropriate `sops.secrets.<name>.path`, `owner`, `mode`, `restartUnits` so the depending service (sshd, wireguard, nginx) reloads when the secret changes.
-- **Personal/identifying info**: this doesn't belong in sops (it's not "secret," it's just information you don't want public). Replace real names/emails with placeholders or move to a small untracked `local.nix` that's `.gitignore`'d and imported conditionally, with a documented template (`local.nix.example`) committed instead.
-
-### 2.3 Verify before moving on
-
-- `nixos-rebuild dry-build --flake .#<host>` succeeds for every host.
-- `sudo nixos-rebuild switch --flake .#<host>` on at least one real machine (or a VM) confirms secrets decrypt and services start.
-- Confirm decrypted secrets land under `/run/secrets/` (not the Nix store — anything placed in `/nix/store` is world-readable by design, so sops-nix's runtime-only placement is the whole point; double check no module accidentally pulls a secret path into a store-built config file).
-- Re-run the grep/scanner sweep from Milestone 1 against the *working tree only* (not history yet) — it should now come back clean.
-
----
-
-## Milestone 3 — Scrub git history
-
-Do this only after Milestone 2 is merged to your main branch and confirmed working, since it rewrites every commit SHA from the point of the earliest offending commit onward.
-
-**This is destructive and irreversible on your local clone. Back up first:**
-```
-cp -r /path/to/nixos-repo /path/to/nixos-repo-backup-$(date +%F)
-```
-
-1. Install `git-filter-repo` (not the older `git filter-branch` / BFG — filter-repo is the currently maintained, faster, safer tool):
-   ```
-   nix-shell -p git-filter-repo
-   ```
-2. Use the `secrets-inventory.md` list to build a list of literal strings/paths to strip. Two approaches, use both:
-   - Path-based: if whole files were secret (e.g. `secrets.nix`, a `.env`, a private key file), remove them entirely from history:
-     ```
-     git filter-repo --path secrets.nix --path .env --invert-paths
-     ```
-   - Value-based: for secrets embedded inline in files you're keeping (not deleting the whole file), use `--replace-text` with a file listing each literal secret string to replace with `***REMOVED***`:
-     ```
-     git filter-repo --replace-text expressions.txt
-     ```
-3. After filtering, verify: run the Milestone 1 scanners again against full history (`--log-opts="--all"`). They must come back clean.
-4. Force-push the rewritten history:
-   ```
-   git push origin --force --all
-   git push origin --force --tags
-   ```
-5. **Every other clone of this repo (other machines, WSL instances, CI) must be deleted and re-cloned fresh** — a `git pull` against rewritten history will not work cleanly and risks resurrecting the old commits. Don't try to reconcile old clones; throw them away and re-clone.
-6. If this repo has ever been pushed to a public host (GitHub, etc.) or a fork/mirror exists, treat every secret that was ever in history as **permanently compromised regardless of the rewrite** — caches, forks, and Wayback-style archives can retain old commits indefinitely. History scrubbing prevents *future* exposure via `git clone`; it does not undo past exposure.
-
----
-
-## Milestone 4 — Rotate everything
-
-Because the secrets were exposed in history (even briefly, even in a private repo), the migration is not complete until every credential in the inventory has been **rotated**, not just re-encrypted. Re-encrypting an already-leaked value protects it going forward but doesn't undo the leak.
-
-For each row in the original inventory:
-- Password hashes → change the actual account password, regenerate the hash, update the sops file.
-- API tokens/auth keys → revoke the old token in the issuing service's dashboard (Cloudflare, Tailscale, backup provider, etc.) and generate a new one.
-- SSH/WireGuard private keys → generate new keypairs, update the corresponding public key wherever it's trusted (authorized_keys, peer configs, etc.), retire the old ones.
-- TLS certs → reissue if the private key was exposed.
-
-Keep `secrets-inventory.md` open during this step and check off each row as rotated. Delete the file only once every row is checked off — it should not be committed.
-
----
-
-## Ongoing prevention
-
-Add a pre-commit hook (or a `nix flake check` step) running `gitleaks protect --staged` so a secret can't be committed again by accident. Document in the repo README (briefly) that new secrets go through `sops <file>` to edit, never as plaintext in a tracked file.
-
----
-
-## Definition of done
-
-**Status as of 2026-07-20:** Milestones 1–3 are done — sops-nix is fully
-wired (`.sops.yaml`, `secrets/*.yaml`, referenced via `hashedPasswordFile`/
-`*File`/`sops.secrets.*.path` throughout), and history has been scrubbed
-with `git-filter-repo` + force-push (this removed a GitHub fine-grained PAT
-that had been committed in plaintext in `flake.nix`/`common/home.nix`
-between 2025-07-16 and 2026-02-09, later migrated to sops but never scrubbed
-from history until now). **Milestone 4 is not confirmed** — whether that PAT
-(or any other historically-plaintext credential) was actually rotated, not
-just re-encrypted, isn't something this repo can attest to; that's an
-operator action against the issuing service (GitHub, etc.), not a repo
-change. Do that before considering this fully closed.
-
-- [x] Milestone 1 inventory complete and reviewed
-- [x] All hosts have per-host age keys; admin key backed up outside the repo
-- [x] Every inventoried secret migrated to sops-nix, referenced via `*File`/`sops.secrets.*.path`, nothing plaintext in the working tree
-- [x] `nixos-rebuild dry-build` and at least one real `switch` verified per host
-- [x] Working-tree scanner sweep clean
-- [x] History rewritten with `git-filter-repo`, force-pushed, full-history scanner sweep clean
-- [ ] All other clones deleted and re-cloned from the rewritten history — every clone that existed before 2026-07-20's rewrite (any other machine, WSL instance, or CI checkout) needs this
-- [ ] Every credential in the original inventory rotated (not just re-encrypted) — **the GitHub PAT found in history specifically still needs this**
-- [x] Pre-commit secret scanning hook added (`.githooks/pre-commit`, `gitleaks protect --staged`)
-- [x] `secrets-inventory.md` deleted from the working directory (never committed)

scripts/codex-setup.sh

@@ -41,6 +41,17 @@ warn-dirty = false
 build-users-group = nixbld
 EOF
 
+    # The official installer's single-user root path still shells out to
+    # `sudo` to create /nix even though it already knows it's running as
+    # root -- confirmed live against a sudo-less minimal Debian/Proxmox
+    # node, where it fails with "sudo: not found" and prints this exact
+    # mkdir/chown as the manual fix. Pre-create it so that branch of the
+    # installer is skipped entirely.
+    if [ ! -d /nix ]; then
+      mkdir -m 0755 /nix
+      chown root /nix
+    fi
+
     sh <(curl -L https://nixos.org/nix/install) --no-daemon
   else
     sh <(curl -L https://nixos.org/nix/install) --no-daemon

scripts/create-proxmox-resource.sh

@@ -22,12 +22,21 @@
 #     refuses to run if the target VMID already exists on the node, or if
 #     a VM/CT identified as --host already exists under any other VMID
 #     (checked live against the node; --allow-duplicate-host overrides).
+#   - --allow-duplicate-host distinguishes an exact match (same --type
+#     *and* --host, e.g. re-running --type lxc --host docker while an
+#     lxc-docker container already exists -- almost always a redeploy of
+#     the same target to pick up a rebuilt image) from a cross-type match
+#     (a different platform sharing the same host identity, e.g. a
+#     proxmox-docker VM coexisting with lxc-docker). Only the exact match
+#     is destroyed and replaced, after typing the hostname back to
+#     confirm (outside --dry-run) -- a cross-type match is always left
+#     untouched, matching-or-not.
 #   - --modify only ever touches a resource you name explicitly via
 #     --vmid, shows exactly what will change first, and (outside
 #     --dry-run) always requires typing that VMID back to confirm before
 #     anything is sent to the node. There is no bulk/implicit modify.
-#   - Neither mode can start/stop/delete a resource. Not implemented on
-#     purpose -- ask before adding it.
+#   - Outside of --allow-duplicate-host's exact-match replace above,
+#     neither mode can start/stop/delete a resource.
 #
 # See --help for the full option list.
 set -euo pipefail
@@ -77,7 +86,13 @@ Create mode (default):
                                 already exists on the node (checked live via
                                 qm/pct, not any file in this repo) --
                                 otherwise refused, since it'd share that
-                                host's hostName/hostId.
+                                host's hostName/hostId. An existing resource
+                                of this *same* --type (e.g. re-running --type
+                                lxc --host docker over an existing lxc-docker)
+                                is destroyed and replaced, after confirming --
+                                a different --type sharing the same --host
+                                (e.g. a proxmox-docker VM) is always left
+                                untouched.
 
 Modify mode (reconfigure an EXISTING resource -- requires --modify):
   --modify                Switch to modify mode.
@@ -319,12 +334,13 @@ fi
 # this script itself always uses unless --name is overridden) -- a guest
 # manually renamed on the node afterwards wouldn't match, but nothing here
 # creates guests that way.
-if [[ "$allow_duplicate_host" -eq 1 ]]; then
-  echo
-  echo "--allow-duplicate-host: skipping the check for an existing '${host}' on ${node}."
-elif [[ "$dry_run" -eq 1 ]]; then
+if [[ "$dry_run" -eq 1 ]]; then
   echo
   echo "[dry-run] would check ${node} for an existing VM/CT identified as '${host}'"
+  if [[ "$allow_duplicate_host" -eq 1 ]]; then
+    echo "[dry-run] --allow-duplicate-host: an existing ${type} named '${host}' would be" \
+      "destroyed and replaced; a different-type match would be left untouched"
+  fi
 else
   echo
   echo "==> Checking ${node} for an existing VM/CT identified as '${host}'..."
@@ -349,17 +365,90 @@ REMOTE_SCRIPT
     echo "check entirely)." >&2
     exit 1
   fi
+
+  # Split into "exact" (same resource kind as --type -- i.e. literally this
+  # same host+platform combo already exists, almost always a redeploy of
+  # the same target to test a rebuilt image) vs "cross-type" (a different
+  # platform sharing this host identity, e.g. a stopped proxmox-docker VM
+  # coexisting with an lxc-docker container -- a deliberate, valid setup
+  # this script has never managed and still won't). Read via a herestring
+  # (not a pipe) so the appends below survive outside the loop.
+  this_kind="$type"
+  exact_matches=""
+  cross_matches=""
   if [[ -n "$existing" ]]; then
-    echo "ERROR: '${host}' already exists on ${node}:" >&2
-    echo "$existing" | while read -r kind id n; do
+    while read -r kind id n; do
+      [[ -z "$kind" ]] && continue
+      if [[ "$kind" == "$this_kind" ]]; then
+        exact_matches+="${kind} ${id} ${n}"$'\n'
+      else
+        cross_matches+="${kind} ${id} ${n}"$'\n'
+      fi
+    done <<<"$existing"
+  fi
+
+  if [[ -n "$exact_matches" && "$allow_duplicate_host" -ne 1 ]]; then
+    echo "ERROR: '${host}' already exists on ${node} as this same resource type:" >&2
+    echo "$exact_matches" | while read -r kind id n; do
+      [[ -z "$kind" ]] && continue
+      echo "  - ${kind} VMID ${id} (${n})" >&2
+    done
+    echo "Refusing to create a second ${this_kind} sharing this identity. Pass" >&2
+    echo "--allow-duplicate-host to destroy it and create a fresh one in its place" >&2
+    echo "(after confirming), or use --modify to reconfigure the existing one instead." >&2
+    exit 1
+  fi
+
+  if [[ -n "$cross_matches" && "$allow_duplicate_host" -ne 1 ]]; then
+    echo "ERROR: '${host}' already exists on ${node} as a different resource type:" >&2
+    echo "$cross_matches" | while read -r kind id n; do
+      [[ -z "$kind" ]] && continue
       echo "  - ${kind} VMID ${id} (${n})" >&2
     done
     echo "Refusing to create a second resource sharing this identity. Pass" >&2
     echo "--allow-duplicate-host to create one anyway (it gets its own distinct" >&2
-    echo "sops key and VMID -- the existing resource(s) above are left untouched)," >&2
+    echo "sops key and VMID -- the existing resource above is left untouched)," >&2
     echo "or use --modify to reconfigure the existing one instead." >&2
     exit 1
   fi
+
+  if [[ -n "$cross_matches" ]]; then
+    echo "--allow-duplicate-host: '${host}' also exists on ${node} as a different resource" \
+      "type -- leaving it untouched:"
+    echo "$cross_matches" | while read -r kind id n; do
+      [[ -z "$kind" ]] && continue
+      echo "  - ${kind} VMID ${id} (${n})"
+    done
+  fi
+
+  if [[ -n "$exact_matches" ]]; then
+    echo "--allow-duplicate-host: '${host}' already exists on ${node} as this same resource" \
+      "type -- it will be destroyed and replaced:"
+    echo "$exact_matches" | while read -r kind id n; do
+      [[ -z "$kind" ]] && continue
+      echo "  - ${kind} VMID ${id} (${n})"
+    done
+    echo
+    read -rp "Type the hostname (${host}) to confirm destroying the above and replacing it: " confirm
+    if [[ "$confirm" != "$host" ]]; then
+      echo "Cancelled -- input didn't match ${host}." >&2
+      exit 1
+    fi
+    echo "$exact_matches" | while read -r kind id n; do
+      [[ -z "$kind" ]] && continue
+      echo "==> Destroying ${kind} VMID ${id} (${n})..."
+      if [[ "$kind" == "vm" ]]; then
+        # qm destroy has no --force to stop-then-destroy in one call (pct's
+        # does) -- stop explicitly first if it's running.
+        if ssh "$ssh_target" "qm status ${id}" 2>/dev/null | grep -q running; then
+          ssh "$ssh_target" "qm stop ${id}"
+        fi
+        ssh "$ssh_target" "qm destroy ${id} --purge 1"
+      else
+        ssh "$ssh_target" "pct destroy ${id} --force 1 --purge 1"
+      fi
+    done
+  fi
 fi
 
 echo "Target: ${flake_target} (host=${host}, type=${type}) -> Proxmox resource '${name}'"
@@ -435,7 +524,7 @@ ensure_remote_repo() {
   echo
   echo "==> Ensuring ${remote_repo_dir} exists and is current on ${node}..."
   if [[ "$dry_run" -eq 1 ]]; then
-    echo "[dry-run] would ensure ${remote_repo_dir} exists on ${node} (clone + scripts/codex-setup.sh if missing, git pull if present)"
+    echo "[dry-run] would ensure ${remote_repo_dir} exists on ${node} (clone if missing, git pull if present), and would verify/bootstrap build tooling there (scripts/codex-setup.sh) if \`nix\` isn't already on PATH"
     return
   fi
 
@@ -453,6 +542,33 @@ ensure_remote_repo() {
     fi
     echo "Not present -- cloning from ${origin_url}..."
     ssh "$ssh_target" "git clone '${origin_url}' '${remote_repo_dir}'"
+  fi
+
+  # Trivial check, run every time (not just right after a fresh clone) --
+  # confirmed live: a first bootstrap can clone the repo successfully and
+  # still leave the node without a working `nix` (e.g. the node had no
+  # `sudo`, which the Nix installer's root path depends on -- see the fix
+  # in scripts/codex-setup.sh), and a later run with the repo already
+  # present would otherwise never retry it. Sources
+  # scripts/lib/nix-bootstrap.sh's ensure_nix_profile first -- a
+  # single-user Nix install typically only gets sourced into login shells,
+  # and ssh's non-interactive command execution is neither, so a
+  # freshly-installed `nix` still wouldn't be on PATH here without it.
+  #
+  # Just `nix` today -- the only thing the remote build commands below
+  # actually invoke -- but a list (not a single hardcoded check) so a
+  # future remote step needing another tool can add itself here instead of
+  # growing a parallel check.
+  local remote_required_cmds=(nix)
+  local tooling_check_cmd="cd '${remote_repo_dir}' && . scripts/lib/nix-bootstrap.sh && ensure_nix_profile"
+  local cmd
+  for cmd in "${remote_required_cmds[@]}"; do
+    tooling_check_cmd="${tooling_check_cmd} && command -v ${cmd}"
+  done
+
+  if ssh "$ssh_target" "$tooling_check_cmd" >/dev/null 2>&1; then
+    echo "Build tooling already present on ${node}."
+  else
     echo "==> Bootstrapping build tooling on ${node} (scripts/codex-setup.sh)..."
     ssh "$ssh_target" "cd '${remote_repo_dir}' && bash scripts/codex-setup.sh"
   fi
@@ -536,6 +652,11 @@ repo_dir="$1"; target="$2"; dest_dir="$3"; dest_name="$4"; nix_extra_opts_str="$
 declare -a NIX_OPTS=()
 [[ -n "$nix_extra_opts_str" ]] && eval "NIX_OPTS=(${nix_extra_opts_str})"
 cd "$repo_dir"
+# A single-user Nix install only gets sourced into login shells; this ssh
+# session is neither, so `nix` wouldn't otherwise be on PATH here even
+# right after a successful install.
+. scripts/lib/nix-bootstrap.sh
+ensure_nix_profile
 NIXOS_HOST_KEYS_DIR="$(pwd)/host-keys" nix build --impure \
   --no-use-registries --no-accept-flake-config "${NIX_OPTS[@]}" \
   ".#nixosConfigurations.${target}.config.system.build.tarball" \
@@ -583,6 +704,8 @@ repo_dir="$1"; target="$2"; dest_dir="$3"; dest_name="$4"; nix_extra_opts_str="$
 declare -a NIX_OPTS=()
 [[ -n "$nix_extra_opts_str" ]] && eval "NIX_OPTS=(${nix_extra_opts_str})"
 cd "$repo_dir"
+. scripts/lib/nix-bootstrap.sh
+ensure_nix_profile
 nix build --no-use-registries --no-accept-flake-config "${NIX_OPTS[@]}" \
   ".#nixosConfigurations.${target}.config.system.build.diskoImagesScript" \
   --out-link "result-${target}"
@@ -642,7 +765,17 @@ if [[ "$type" == "lxc" ]]; then
   # systemd routinely uses (even plain getty units), and every getty
   # crash-loops on a denied mount every ~3s (visible as garbage on the
   # console) while core services like nsncd fail the same way.
-  create_cmd="pct create ${vmid} ${iso_storage}:vztmpl/${remote_filename} --unprivileged 1 --features ${PROXMOX_DEFAULT_LXC_FEATURES} --rootfs ${storage}:${local_disk_size} --hostname ${name} --cores ${cores} --memory ${memory} --swap ${local_swap} --net0 name=eth0,bridge=${bridge},ip=dhcp"
+  #
+  # ...,mount=nfs;nfs4: without it AppArmor blanket-denies the `nfs`/
+  # `rpc_pipefs` mount syscalls any NFS client share needs -- confirmed
+  # live on lxc-docker: `mount: /var/lib/nfs/rpc_pipefs: permission
+  # denied`. The value's `;` (Proxmox's own multi-fstype separator for
+  # this one feature, per PVE::LXC's use of PVE::ParseUtils::split_list)
+  # must stay single-quoted here: create_cmd is sent to `remote()`, which
+  # hands the whole string to `ssh` as a single command for the *remote*
+  # shell to parse -- unquoted, that `;` would be read as a remote
+  # command separator and silently truncate this into two commands.
+  create_cmd="pct create ${vmid} ${iso_storage}:vztmpl/${remote_filename} --unprivileged 1 --features '${PROXMOX_DEFAULT_LXC_FEATURES}' --rootfs ${storage}:${local_disk_size} --hostname ${name} --cores ${cores} --memory ${memory} --swap ${local_swap} --net0 name=eth0,bridge=${bridge},ip=dhcp"
   remote "$create_cmd"
   remote "pct start ${vmid}"
 else

scripts/env.sh

@@ -53,7 +53,15 @@
 # crash-loops on a denied `/run/credentials/*` mount every ~3s (visible
 # as garbage on the console) and core services like nsncd fail the same
 # way on userns_create; system.build.tarball never finishes activating.
-: "${PROXMOX_DEFAULT_LXC_FEATURES:=nesting=1,keyctl=1}"
+#
+# mount=nfs;nfs4: without it, AppArmor blanket-denies the `nfs`/
+# `rpc_pipefs` mount syscalls any NFS client share needs -- confirmed
+# live on lxc-docker (which mounts several, see modules/docker/mount-data.nix
+# and modules/raspi/mount-data.nix): `mount: /var/lib/nfs/rpc_pipefs:
+# permission denied`. Harmless to grant on lxc targets that don't mount
+# NFS at all -- it only widens what the container is *allowed* to mount,
+# nothing here forces a mount to happen.
+: "${PROXMOX_DEFAULT_LXC_FEATURES:=nesting=1,keyctl=1,mount=nfs;nfs4}"
 
 export PROXMOX_HOST PROXMOX_SSH_USER PROXMOX_STORAGE PROXMOX_ISO_STORAGE \
   PROXMOX_BRIDGE PROXMOX_DEFAULT_CORES PROXMOX_DEFAULT_MEMORY_MB \

variables.nix

@@ -137,6 +137,14 @@
     # shortcuts on the gui build type (hosts/nixos/home.nix).
     pveWeb = 8006;
     pbsWeb = 8007;
+
+    # Tor relay's ORPort — the port other Tor relays connect to for onion
+    # routing traffic (modules/tor/enable-relay.nix). Tor's own conventional
+    # default; opened via services.tor.openFirewall rather than
+    # networking.firewall.allowedTCPPorts directly, but kept here anyway so
+    # it's not a bare literal duplicated between the relay's settings and
+    # anything else that ever needs to reference it.
+    torRelayOrPort = 9001;
   };
 
   # .raw disk image size for every proxmox-* host's standalone Disko image