feat(pxe-boot): enroll in FreeIPA domain

- Add IPA client module with pre-provisioned keytab
- Set networking.domain for correct Kerberos FQDN
- Encrypted keytab covers lxc-pxe-boot and proxmox-pxe-boot age keys

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

.sops.yaml

@@ -63,6 +63,16 @@ creation_rules:
           - *lxc-nix-cache
           - *proxmox-nix-cache
 
+  # Host keytab for nix-cache FreeIPA enrollment (binary sops file).
+  # Generate with: sops -e --input-type binary /tmp/nix-cache.keytab > secrets/nix-cache.keytab
+  - path_regex: secrets/nix-cache\.keytab$
+    key_groups:
+      - age:
+          - *admin
+          - *linode-nix-cache
+          - *lxc-nix-cache
+          - *proxmox-nix-cache
+
   - path_regex: secrets/server\.yaml$
     key_groups:
       - age:
@@ -117,6 +127,16 @@ creation_rules:
   # scripts/secrets/sync-host-keys.sh yet, so whichever variant is actually
   # deployed next needs its recipient added here (and `sops updatekeys` rerun)
   # before it can decrypt this.
+  # Host keytab for tailscale-router FreeIPA enrollment (binary sops file).
+  # Generated by scripts/ipa/create-nixos-ipa-host-account.sh.
+  - path_regex: secrets/tailscale-router\.keytab$
+    key_groups:
+      - age:
+          - *admin
+          - *lxc-tailscale-router
+          - *proxmox-tailscale-router
+          - *linode-tailscale-router
+
   - path_regex: secrets/gui\.yaml$
     key_groups:
       - age:
@@ -125,3 +145,12 @@ creation_rules:
           - *baremetal-gui
           - *linode-gui
           - *proxmox-gui
+
+  # Host keytab for pxe-boot FreeIPA enrollment (binary sops file).
+  # Generated by scripts/ipa/create-nixos-ipa-host-account.sh.
+  - path_regex: secrets/pxe-boot\.keytab$
+    key_groups:
+      - age:
+          - *admin
+          - *lxc-pxe-boot
+          - *proxmox-pxe-boot

certs/ipa-ca.crt

@@ -0,0 +1,25 @@
+-----BEGIN CERTIFICATE-----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=
+-----END CERTIFICATE-----

docs/network-cutover.md

@@ -0,0 +1,366 @@
+# Network Cutover Plan
+
+Moves the LAN from the current flat/Pi-hole-managed state to the new IP scheme
+defined in `docs/ip-addressing.md`. Works in five independent stages — each
+stage is safe to pause after and resume later. Rollback steps are given at
+every point where something can break.
+
+**Before starting anything:** confirm you have
+- SSH access to `192.168.2.138` (domain-controller, current IP)
+- SSH access to `192.168.2.250` (pve1)
+- Browser access to Pi-hole admin at `http://192.168.2.253`
+- Browser access to router admin at `http://192.168.2.254`
+- The FreeIPA `admin` password to hand
+
+---
+
+## Stage 1 — Prepare FreeIPA DNS (zero downtime)
+
+Everything here is additive. Pi-hole keeps running. Nothing breaks if you stop
+mid-stage.
+
+### 1a. Add NextDNS forwarders
+
+```bash
+ssh wayne@192.168.2.138
+kinit admin          # enter FreeIPA admin password when prompted
+ipa dnsconfig-mod \
+  --forwarder=45.90.28.142 \
+  --forwarder=45.90.30.142 \
+  --forward-policy=only
+```
+
+**Verify external resolution works through FreeIPA before continuing:**
+```bash
+dig @127.0.0.1 google.com +short   # must return an IP, not SERVFAIL
+```
+
+### 1b. Add A records for every host at their CURRENT IPs
+
+These represent the live state now. You'll update each record to the new IP
+when you renumber that host in Stage 5.
+
+```bash
+ipa dnsrecord-add sweet.home pve1             --a-rec 192.168.2.250
+ipa dnsrecord-add sweet.home pbs              --a-rec 192.168.2.108
+ipa dnsrecord-add sweet.home nixos            --a-rec 192.168.2.119
+ipa dnsrecord-add sweet.home server           --a-rec 192.168.2.252
+ipa dnsrecord-add sweet.home docker           --a-rec 192.168.2.249
+ipa dnsrecord-add sweet.home nix-cache        --a-rec 192.168.2.120
+ipa dnsrecord-add sweet.home pxe-boot         --a-rec 192.168.2.247
+ipa dnsrecord-add sweet.home tailscale-router --a-rec 192.168.2.121
+ipa dnsrecord-add sweet.home tor-relay        --a-rec 192.168.2.107
+ipa dnsrecord-add sweet.home pdm              --a-rec 192.168.2.248
+ipa dnsrecord-add sweet.home router           --a-rec 192.168.2.254
+```
+
+### 1c. Clean up stale reverse-zone PTR records
+
+FreeIPA already has PTR records from an earlier import but some are wrong.
+Fix them now so reverse DNS is accurate from day one.
+
+```bash
+# Remove stale "win11" entry at .250 (should be pve1)
+ipa dnsrecord-del 2.168.192.in-addr.arpa 250 --ptr-rec win11.
+ipa dnsrecord-add 2.168.192.in-addr.arpa 250 --ptr-rec pve1.sweet.home.
+
+# Fix unqualified PTR records (missing .sweet.home. suffix)
+ipa dnsrecord-mod 2.168.192.in-addr.arpa 108 --ptr-rec pbs.sweet.home.
+ipa dnsrecord-mod 2.168.192.in-addr.arpa 248 --ptr-rec pdm.sweet.home.
+ipa dnsrecord-mod 2.168.192.in-addr.arpa 249 --ptr-rec docker.sweet.home.
+ipa dnsrecord-mod 2.168.192.in-addr.arpa 252 --ptr-rec server.sweet.home.
+
+# Add any missing PTR records
+ipa dnsrecord-add 2.168.192.in-addr.arpa 119 --ptr-rec nixos.sweet.home.
+ipa dnsrecord-add 2.168.192.in-addr.arpa 120 --ptr-rec nix-cache.sweet.home.
+ipa dnsrecord-add 2.168.192.in-addr.arpa 121 --ptr-rec tailscale-router.sweet.home.
+ipa dnsrecord-add 2.168.192.in-addr.arpa 247 --ptr-rec pxe-boot.sweet.home.
+ipa dnsrecord-add 2.168.192.in-addr.arpa 254 --ptr-rec router.sweet.home.
+```
+
+### 1d. Point domain-controller's own DNS at itself
+
+```bash
+sudo nmcli connection modify "System eth0" ipv4.dns "127.0.0.1"
+sudo nmcli connection up "System eth0"
+```
+
+**Verify:**
+```bash
+dig pve1.sweet.home +short          # must return 192.168.2.250
+dig google.com +short               # must return an IP (NextDNS forwarding)
+```
+
+**Rollback 1d:** `sudo nmcli connection modify "System eth0" ipv4.dns "192.168.2.253" && sudo nmcli connection up "System eth0"`
+
+---
+
+## Stage 2 — Move pxe-boot DHCP options off Pi-hole (zero downtime)
+
+Pi-hole's dnsmasq currently serves the iPXE boot options via
+`99-ipxe-chainload.conf`. Before Pi-hole is retired, that config must move to
+the pxe-boot CT running dnsmasq in proxy mode so PXE boot keeps working.
+
+### 2a. Add dnsmasq proxy config to the pxe-boot NixOS module
+
+In `modules/build-types/pxe-boot.nix`, add:
+
+```nix
+services.dnsmasq = {
+  enable = true;
+  settings = {
+    # Proxy mode: respond only to PXE DHCP requests, leave normal leases to router
+    dhcp-range = [ "192.168.2.0,proxy" ];
+    # iPXE client detection
+    dhcp-match = [
+      "set:ipxe,175"
+      "set:efi64,option:client-arch,7"
+      "set:efi64,option:client-arch,9"
+    ];
+    dhcp-userclass = "set:ipxe,iPXE";
+    # Boot file selection
+    dhcp-boot = [
+      "tag:ipxe,tag:efi64,http://${vars.pxeServerIp}/boot.ipxe"
+      "tag:ipxe,http://${vars.pxeServerIp}/boot.ipxe"
+      "tag:efi64,ipxe.efi,,${vars.pxeServerIp}"
+      "undionly.kpxe,,${vars.pxeServerIp}"
+    ];
+  };
+};
+```
+
+### 2b. Rebuild and deploy the pxe-boot CT
+
+```bash
+# On pve1 — build the new tarball
+nix build .#lxc-pxe-boot.config.system.build.tarball
+
+# Verify dnsmasq starts correctly in the CT after deploy
+ssh nixos@192.168.2.247 systemctl status dnsmasq
+```
+
+### 2c. Remove the iPXE config from Pi-hole
+
+In the Pi-hole CT, remove `/etc/dnsmasq.d/99-ipxe-chainload.conf` and
+restart the FTL service:
+
+```bash
+ssh wayne@pve1.sweet.home \
+  "sudo pct exec 100 -- bash -c 'rm /etc/dnsmasq.d/99-ipxe-chainload.conf && systemctl restart pihole-FTL'"
+```
+
+**Verify:** PXE boot a test machine — it should still get an iPXE response and
+reach the boot menu.
+
+**Rollback 2c:** restore the file from the Pi-hole config backup at
+`/etc/pihole/config_backups/` and restart pihole-FTL.
+
+---
+
+## Stage 3 — DHCP migration: Pi-hole → router (brief maintenance window)
+
+**Do this in the evening.** Existing DHCP leases stay valid during the
+switchover so connected devices don't drop — only new lease requests fail
+during the gap, which is under 60 seconds if you follow the steps in order.
+
+The key: configure the router's DHCP DNS option to point at `.253` (Pi-hole's
+current IP). This way, all new leases issued by the router still get the same
+DNS server address — clients never need to change their DNS config. When Pi-hole
+is retired and the DC takes `.253` in Stage 4, `.253` just starts answering
+differently. No client reconfiguration.
+
+### 3a. Pre-configure router DHCP (do not enable yet)
+
+Log into `http://192.168.2.254`, find the DHCP settings and fill in — but
+leave DHCP **disabled** until step 3b:
+
+| Setting | Value |
+|---|---|
+| Start IP | 192.168.2.10 |
+| End IP | 192.168.2.59 |
+| Subnet mask | 255.255.255.0 |
+| Gateway | 192.168.2.254 |
+| Primary DNS | 192.168.2.253 |
+| Secondary DNS | *(leave blank)* |
+| Lease time | 24h |
+
+Save without enabling.
+
+### 3b. Switchover (do steps in quick succession)
+
+1. **Disable Pi-hole DHCP:** Pi-hole admin UI → Settings → DHCP → uncheck
+   "DHCP server enabled" → Save
+2. **Enable router DHCP** immediately after step 1
+
+### 3c. Verify router DHCP is working
+
+On a phone or laptop, disconnect from WiFi and reconnect (or run
+`sudo dhclient -r && sudo dhclient` on a Linux host):
+
+```bash
+ip addr show        # IP should be in 192.168.2.10–59 range
+dig google.com      # should resolve (Pi-hole DNS still running at .253)
+dig pve1.sweet.home # should resolve via FreeIPA at .138 (relayed via Pi-hole)
+```
+
+Wait 10–15 minutes for the most active devices to renew their leases. There's
+no need to wait for all leases to expire before proceeding.
+
+**Rollback 3b:** Re-enable Pi-hole DHCP. Disable router DHCP. Done — existing
+leases remain valid so most devices are unaffected.
+
+---
+
+## Stage 4 — Move domain-controller from .138 to .253
+
+Pi-hole lives at `.253`. The DC must take `.253` the moment Pi-hole stops so
+clients that still have `.253` as their DNS server don't notice the change.
+Script these commands in advance and run them in rapid succession.
+
+**Pre-stage: have this SSH command ready before running step 4a:**
+```bash
+ssh wayne@192.168.2.138 "
+  sudo nmcli connection modify 'System eth0' \
+    ipv4.addresses '192.168.2.253/24' \
+    ipv4.gateway '192.168.2.254' \
+    ipv4.dns '127.0.0.1' \
+    ipv4.method manual && \
+  sudo nmcli connection up 'System eth0'
+"
+```
+
+**Also update the Proxmox VM config to match (run from pve1):**
+```bash
+sudo qm set 108 \
+  --ipconfig0 ip=192.168.2.253/24,gw=192.168.2.254 \
+  --nameserver 192.168.2.253
+```
+
+### 4a. Stop Pi-hole
+
+```bash
+ssh wayne@pve1.sweet.home "sudo pct stop 100"
+```
+
+### 4b. Immediately: change DC's IP to .253
+
+Run the pre-staged SSH command from above. You have ~30 seconds before any
+client notices Pi-hole is gone. If SSH to `.138` refuses (the IP is already
+changing), open a Proxmox console to VM 108 and run the `nmcli` commands
+there.
+
+### 4c. Update Proxmox VM config
+
+Run the pre-staged `qm set 108` command from above.
+
+### 4d. Verify
+
+```bash
+ssh wayne@192.168.2.253   # must connect (new DC IP)
+dig @192.168.2.253 pve1.sweet.home +short   # must return 192.168.2.250
+dig @192.168.2.253 google.com +short        # must return an IP
+```
+
+From a client device that renewed its DHCP lease in Stage 3:
+```bash
+cat /etc/resolv.conf    # should show 192.168.2.253
+dig pve1.sweet.home     # should resolve
+```
+
+**Rollback 4:** `ssh wayne@pve1.sweet.home "sudo pct start 100"`. Change DC IP
+back to .138 via Proxmox console. This restores full Pi-hole DNS/DHCP service.
+Leave Pi-hole CT stopped-but-intact for 48 hours before deleting it.
+
+---
+
+## Stage 5 — Host renumbering (one at a time, any order)
+
+For each host:
+1. Update FreeIPA DNS A record and PTR record to the new IP
+2. Change the static IP on the host itself
+3. Verify SSH to new IP
+4. Update `variables.nix` if that host has an IP variable (pxe-boot, pbs — already done in this PR)
+
+**FreeIPA record update template** (run as admin on domain-controller):
+```bash
+ipa dnsrecord-mod sweet.home <hostname> --a-rec <new-ip>
+ipa dnsrecord-del 2.168.192.in-addr.arpa <old-last-octet> --ptr-rec <hostname>.sweet.home.
+ipa dnsrecord-add 2.168.192.in-addr.arpa <new-last-octet> --ptr-rec <hostname>.sweet.home.
+```
+
+### Renumbering order
+
+| # | Host | Old IP | New IP | How to change IP |
+|---|---|---|---|---|
+| 1 | nixos workstation | .119 | .243 | NetworkManager on guest; or `nmcli connection modify` |
+| 2 | nix-cache | .120 | .224 | `pct set 102 --net0 name=eth0,bridge=vmbr0,ip=192.168.2.224/24,gw=192.168.2.254` then `pct reboot 102` |
+| 3 | tailscale-router | .121 | .222 | Static config on guest; check Tailscale ACLs if IP is referenced there |
+| 4 | tor-relay | .107 | .221 | `pct set 104 --net0 name=eth0,bridge=vmbr0,ip=192.168.2.221/24,gw=192.168.2.254` then `pct reboot 104` |
+| 5 | pdm | .248 | .220 | `pct set 106 --net0 name=eth0,bridge=vmbr0,ip=192.168.2.220/24,gw=192.168.2.254` then `pct reboot 106` |
+| 6 | pxe-boot | .247 | .223 | `pct set 103 --net0 name=eth0,bridge=vmbr0,ip=192.168.2.223/24,gw=192.168.2.254` then rebuild NixOS (already updated in variables.nix) |
+| 7 | server | .252 | .226 | Static config on guest; NFS clients (docker) lose mounts briefly — they remount automatically |
+| 8 | docker | .249 | .225 | Static config on guest; do this after server is at .226 |
+| 9 | pbs | .108 | .244 | Static config on PBS host itself; update in `pbsIp` already done in variables.nix |
+| 10 | pve1 | .250 | .245 | Edit `/etc/network/interfaces` on the Proxmox host — see below |
+
+### pve1 renumber (step 10 — do last)
+
+All guests keep running; only the Proxmox web UI is briefly unreachable.
+
+```bash
+ssh wayne@pve1.sweet.home
+
+# Edit /etc/network/interfaces: change address from .250 to .245
+sudo nano /etc/network/interfaces
+# Change:  address 192.168.2.250/24
+# To:      address 192.168.2.245/24
+
+sudo systemctl restart networking
+# SSH will drop here — reconnect to new IP
+```
+
+```bash
+ssh wayne@192.168.2.245    # verify
+```
+
+Update FreeIPA DNS:
+```bash
+ipa dnsrecord-mod sweet.home pve1 --a-rec 192.168.2.245
+ipa dnsrecord-del 2.168.192.in-addr.arpa 250 --ptr-rec pve1.sweet.home.
+ipa dnsrecord-add 2.168.192.in-addr.arpa 245 --ptr-rec pve1.sweet.home.
+```
+
+**Rollback any step 5 host:** change the IP back on the guest and update the
+FreeIPA record back to the old IP. The old IP is unoccupied so you can
+temporarily use either.
+
+---
+
+## Stage 6 — Final cleanup
+
+Once all hosts are at their new IPs and verified:
+
+```bash
+# Delete the Pi-hole CT (already stopped since Stage 4)
+ssh wayne@pve1.sweet.home "sudo pct destroy 100"
+
+# Remove stale FreeIPA records for retired addresses
+ipa dnsrecord-del sweet.home pihole --del-all
+ipa dnsrecord-del 2.168.192.in-addr.arpa 253 --ptr-rec pihole.sweet.home.
+
+# Rebuild any NixOS hosts that reference pbsIp or pxeServerIp to pick up
+# the updated variables.nix values (pxe-boot mandatory; others as convenient)
+```
+
+---
+
+## Rollback summary
+
+| What broke | How to roll back |
+|---|---|
+| FreeIPA DNS not resolving | Check `systemctl status named` on DC; restart if failed |
+| FreeIPA DNS unreachable | `pct start 100` on pve1 (restores Pi-hole) |
+| Router DHCP not handing out leases | Re-enable Pi-hole DHCP; disable router DHCP |
+| DC unreachable after IP change | Proxmox console on VM 108 → `nmcli connection up "System eth0"` with old IP |
+| Host unreachable after renumber | Proxmox console → revert IP; or `pct set <id> --net0 ...` old IP and reboot CT |
+| pve1 web UI gone after renumber | SSH to .245 and check `/etc/network/interfaces`; if wrong, fix and restart networking |

hosts/docker/host.nix

@@ -1,8 +1,17 @@
-_:
+{ vars, ... }:
 
 {
-  networking.hostName = "docker";
-  networking.hostId = "007f0200";
+  networking = {
+    hostName = "docker";
+    hostId = "007f0200";
+    useDHCP = false;
+    interfaces.${vars.vmLanInterface}.ipv4.addresses = [{
+      address = vars.dockerIp;
+      prefixLength = vars.lanPrefixLength;
+    }];
+    defaultGateway = { address = vars.lanGateway; interface = vars.vmLanInterface; };
+    nameservers = [ vars.domainControllerIp ];
+  };
   boot.zfs.forceImportRoot = false;
 
   # Preserved from the pre-refactor `docker` target — stateVersion must never

hosts/ha-server-1/host.nix

@@ -11,12 +11,16 @@
     hostName = vars.haServer1Host;
     hostId = "3a4b5c6d";
     useDHCP = false;
-    interfaces.ens18.ipv4.addresses = [{
+    interfaces.${vars.vmLanInterface}.ipv4.addresses = [{
       address = vars.haServer1Ip;
-      prefixLength = 24;
+      prefixLength = vars.lanPrefixLength;
     }];
-    defaultGateway = "192.168.2.1";
-    nameservers = [ "192.168.2.1" "8.8.8.8" ];
+    interfaces.${vars.vmStorageInterface}.ipv4.addresses = [{
+      address = vars.haServer1StorageIp;
+      prefixLength = vars.haStoragePrefixLength;
+    }];
+    defaultGateway = { address = vars.lanGateway; interface = vars.vmLanInterface; };
+    nameservers = [ vars.domainControllerIp ];
   };
 
   # Set KEY after pairing this host with the beszel hub; the token is sops-managed.

hosts/ha-server-2/host.nix

@@ -11,12 +11,16 @@
     hostName = vars.haServer2Host;
     hostId = "7e8f9a0b";
     useDHCP = false;
-    interfaces.ens18.ipv4.addresses = [{
+    interfaces.${vars.vmLanInterface}.ipv4.addresses = [{
       address = vars.haServer2Ip;
-      prefixLength = 24;
+      prefixLength = vars.lanPrefixLength;
     }];
-    defaultGateway = "192.168.2.1";
-    nameservers = [ "192.168.2.1" "8.8.8.8" ];
+    interfaces.${vars.vmStorageInterface}.ipv4.addresses = [{
+      address = vars.haServer2StorageIp;
+      prefixLength = vars.haStoragePrefixLength;
+    }];
+    defaultGateway = { address = vars.lanGateway; interface = vars.vmLanInterface; };
+    nameservers = [ vars.domainControllerIp ];
   };
 
   # Set KEY after pairing this host with the beszel hub; the token is sops-managed.

hosts/nix-cache/host.nix

@@ -6,9 +6,23 @@
       name = "nix-cache";
       sopsFile = ../../secrets/nix-cache.yaml;
     })
+    (import ../../modules/ipa/client.nix {
+      keytabSopsFile = ../../secrets/nix-cache.keytab;
+      caCertFile = ../../certs/ipa-ca.crt;
+    })
   ];
 
-  networking.hostName = vars.nixCacheHost;
+  networking = {
+    hostName = vars.nixCacheHost;
+    domain = vars.homeDomain;
+    useDHCP = false;
+    interfaces.${vars.lxcLanInterface}.ipv4.addresses = [{
+      address = vars.nixCacheIp;
+      prefixLength = vars.lanPrefixLength;
+    }];
+    defaultGateway = { address = vars.lanGateway; interface = vars.lxcLanInterface; };
+    nameservers = [ vars.domainControllerIp ];
+  };
 
   services.beszel.agent.environment = {
     #DOCKER_HOST = "tcp://docker-socket-proxy:2375";

hosts/pxe-boot/host.nix

@@ -1,7 +1,24 @@
-_:
+{ vars, ... }:
 
 {
-  networking.hostName = "pxe-boot";
+  imports = [
+    (import ../../modules/ipa/client.nix {
+      keytabSopsFile = ../../secrets/pxe-boot.keytab;
+      caCertFile     = ../../certs/ipa-ca.crt;
+    })
+  ];
+
+  networking = {
+    hostName = "pxe-boot";
+    domain   = vars.homeDomain;
+    useDHCP = false;
+    interfaces.${vars.lxcLanInterface}.ipv4.addresses = [{
+      address = vars.pxeServerIp;
+      prefixLength = vars.lanPrefixLength;
+    }];
+    defaultGateway = { address = vars.lanGateway; interface = vars.lxcLanInterface; };
+    nameservers = [ vars.domainControllerIp ];
+  };
 
   # Preserved from the pre-refactor `pxe-boot` target — stateVersion must
   # never be bumped on an already-installed machine.

hosts/server/host.nix

@@ -8,8 +8,17 @@
     })
   ];
 
-  networking.hostName = vars.nfsServerHost;
-  networking.hostId = "6689f93e";
+  networking = {
+    hostName = vars.nfsServerHost;
+    hostId = "6689f93e";
+    useDHCP = false;
+    interfaces.${vars.vmLanInterface}.ipv4.addresses = [{
+      address = vars.serverIp;
+      prefixLength = vars.lanPrefixLength;
+    }];
+    defaultGateway = { address = vars.lanGateway; interface = vars.vmLanInterface; };
+    nameservers = [ vars.domainControllerIp ];
+  };
 
   services.beszel.agent.environment = {
     #DOCKER_HOST = "tcp://docker-socket-proxy:2375";

hosts/tailscale-router/host.nix

@@ -1,4 +1,4 @@
-_:
+{ vars, ... }:
 
 {
   imports = [
@@ -6,9 +6,23 @@ _:
       name = "tailscale-router";
       sopsFile = ../../secrets/tailscale-router.yaml;
     })
+    (import ../../modules/ipa/client.nix {
+      keytabSopsFile = ../../secrets/tailscale-router.keytab;
+      caCertFile = ../../certs/ipa-ca.crt;
+    })
   ];
 
-  networking.hostName = "tailscale-router";
+  networking = {
+    hostName = "tailscale-router";
+    domain = vars.homeDomain;
+    useDHCP = false;
+    interfaces.${vars.lxcLanInterface}.ipv4.addresses = [{
+      address = vars.tailscaleRouterIp;
+      prefixLength = vars.lanPrefixLength;
+    }];
+    defaultGateway = { address = vars.lanGateway; interface = vars.lxcLanInterface; };
+    nameservers = [ vars.domainControllerIp ];
+  };
 
   services.beszel.agent.environment = {
     KEY = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFPR9kwtC4TAeTRu46A7+opZsYpxqkRJ+x/ZyB2GWCeG";

hosts/tor-relay/host.nix

@@ -1,4 +1,4 @@
-{ ... }:
+{ vars, ... }:
 
 {
   imports = [
@@ -8,10 +8,19 @@
     })
   ];
 
-  networking.hostName = "tor-relay";
+  networking = {
+    hostName = "tor-relay";
+    useDHCP = false;
+    interfaces.${vars.lxcLanInterface}.ipv4.addresses = [{
+      address = vars.torRelayIp;
+      prefixLength = vars.lanPrefixLength;
+    }];
+    defaultGateway = { address = vars.lanGateway; interface = vars.lxcLanInterface; };
+    nameservers = [ vars.domainControllerIp ];
+  };
 
-  # No networking.hostId: only ZFS-touching hosts (server, docker) need one
-  # for pool-import safety, and this host does neither.
+  # No networking.hostId: only ZFS-touching hosts need one for pool-import
+  # safety, and this host does neither.
 
   services.beszel.agent.environment = {
     KEY = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFPR9kwtC4TAeTRu46A7+opZsYpxqkRJ+x/ZyB2GWCeG";

modules/build-types/pxe-boot.nix

@@ -82,7 +82,7 @@ let
   rockyFreeIpaKs = pkgs.writeText "rocky-freeipa.ks" ''
     #version=RHEL9
     # Unattended Rocky Linux 9 + FreeIPA install
-    # Target: domain-controller.sweet.home  192.168.2.138
+    # Target: domain-controller.${vars.homeDomain}  ${vars.domainControllerIp}
 
     url --url=${rockyMirror}/BaseOS/${rockyArch}/os/
     repo --name=appstream --baseurl=${rockyMirror}/AppStream/${rockyArch}/os/
@@ -136,10 +136,10 @@ let
 
     [ipv4]
     method=manual
-    addresses=192.168.2.138/24
-    gateway=192.168.2.254
-    dns=192.168.2.253;
-    dns-search=sweet.home;
+    addresses=${vars.domainControllerIp}/${toString vars.lanPrefixLength}
+    gateway=${vars.lanGateway}
+    dns=${vars.domainControllerIp};
+    dns-search=${vars.homeDomain};
 
     [ipv6]
     method=auto
@@ -148,7 +148,7 @@ let
 
     # -- /etc/hosts: FQDN must resolve to the real IP (not loopback) for IPA --
     sed -i '/domain-controller/d' /etc/hosts
-    echo '192.168.2.138 domain-controller.sweet.home domain-controller' >> /etc/hosts
+    echo '${vars.domainControllerIp} domain-controller.${vars.homeDomain} domain-controller' >> /etc/hosts
 
     # -- Generate IPA passwords and store securely --
     DM_PASS=$(openssl rand -base64 24 | tr -dc 'A-Za-z0-9' | head -c 24)
@@ -420,6 +420,29 @@ in
     };
   };
 
+  services.dnsmasq = {
+    enable = true;
+    settings = {
+      # Disable DNS listener — only proxy DHCP is needed here.
+      # Without this dnsmasq tries to bind port 53 which systemd-resolved
+      # already owns, causing startup failure.
+      port = 0;
+      dhcp-range = [ "192.168.2.0,proxy" ];
+      dhcp-match = [
+        "set:ipxe,175"
+        "set:efi64,option:client-arch,7"
+        "set:efi64,option:client-arch,9"
+      ];
+      dhcp-userclass = "set:ipxe,iPXE";
+      dhcp-boot = [
+        "tag:ipxe,tag:efi64,http://${vars.pxeServerIp}/boot.ipxe"
+        "tag:ipxe,http://${vars.pxeServerIp}/boot.ipxe"
+        "tag:efi64,ipxe.efi,,${vars.pxeServerIp}"
+        "undionly.kpxe,,${vars.pxeServerIp}"
+      ];
+    };
+  };
+
   networking.firewall.allowedTCPPorts = [ vars.ports.pxeBootHttp ];
-  networking.firewall.allowedUDPPorts = [ vars.ports.pxeBootTftp ];
+  networking.firewall.allowedUDPPorts = [ vars.ports.pxeBootTftp 67 ];
 }

modules/build-types/server.nix

@@ -44,14 +44,8 @@ in
         exit 0
       fi
 
-      # Pool exists on a device but not yet imported — let the standard
-      # zfs-import-${poolName}.service handle it normally.
-      if zpool import -d /dev/disk/by-id -N "${poolName}" 2>/dev/null; then
-        exit 0
-      fi
-
-      # No pool found at all.  Create it on the Proxmox data disk (scsi1),
-      # which appears as /dev/disk/by-id/scsi-*drive-scsi1 inside the VM.
+      # Locate the data disk first — used for both the fallback import
+      # attempt and, only if the disk is genuinely blank, pool creation.
       DATA_DISK=""
       for candidate in /dev/disk/by-id/scsi-*drive-scsi1; do
         [[ "$candidate" == *-part* ]] && continue
@@ -63,8 +57,31 @@ in
         exit 1
       fi
 
+      # Try importing via the by-id symlink directory first (normal path),
+      # then fall back to scanning the disk directly.  The two-step exists
+      # because of a udev race: systemd-udev-settle.service can clear before
+      # /dev/disk/by-id/ entries are fully populated, causing the first
+      # import to fail even when the pool is intact on the disk.
+      if zpool import -d /dev/disk/by-id -N "${poolName}" 2>/dev/null; then
+        exit 0
+      fi
+      if zpool import -d "$DATA_DISK" -N "${poolName}" 2>/dev/null; then
+        exit 0
+      fi
+
+      # Both import attempts failed.  Before creating a new pool, verify the
+      # disk is genuinely blank — if ZFS label metadata is present the import
+      # failed for some other reason and we must not clobber existing data.
+      if zdb -l "$DATA_DISK" 2>/dev/null | grep -q "name: '${poolName}'"; then
+        echo "zfs-init-${poolName}: $DATA_DISK has ZFS pool '${poolName}' metadata but import failed — refusing to overwrite existing data. Run 'zpool import -d $DATA_DISK ${poolName}' manually to investigate." >&2
+        exit 1
+      fi
+
+      # Disk is genuinely blank: create the pool.  -f is intentionally
+      # omitted so that if we somehow reach this point with an existing pool
+      # on the disk, zpool refuses rather than silently destroying data.
       echo "zfs-init-${poolName}: creating pool on $DATA_DISK"
-      zpool create -f "${poolName}" "$DATA_DISK"
+      zpool create "${poolName}" "$DATA_DISK"
       ${lib.concatMapStrings (ds: ''
         zfs create "${poolName}/${ds}"
       '') poolDatasets}

modules/build-types/tailscale-router.nix

@@ -3,6 +3,7 @@
 {
   imports = [
     ../tailscale/subnet-router.nix
+    ../tailscale/ts-dns-forwarder.nix
     ../beszel/enable-agent.nix
   ];
 

modules/ha/cluster-config.nix

@@ -47,11 +47,11 @@
         }
 
         on ${vars.haServer1Host} {
-          address ${vars.haServer1Ip}:${toString vars.ports.haServerDrbd};
+          address ${vars.haServer1StorageIp}:${toString vars.ports.haServerDrbd};
         }
 
         on ${vars.haServer2Host} {
-          address ${vars.haServer2Ip}:${toString vars.ports.haServerDrbd};
+          address ${vars.haServer2StorageIp}:${toString vars.ports.haServerDrbd};
         }
       }
     '';
@@ -75,8 +75,8 @@
   services.corosync = {
     clusterName = "ha-cluster";
     nodelist = [
-      { nodeid = 1; name = vars.haServer1Host; ring_addrs = [ vars.haServer1Ip ]; }
-      { nodeid = 2; name = vars.haServer2Host; ring_addrs = [ vars.haServer2Ip ]; }
+      { nodeid = 1; name = vars.haServer1Host; ring_addrs = [ vars.haServer1StorageIp ]; }
+      { nodeid = 2; name = vars.haServer2Host; ring_addrs = [ vars.haServer2StorageIp ]; }
     ];
   };
 
@@ -101,6 +101,7 @@
     extraCommands = ''
       iptables -A INPUT -s ${vars.haServer1Ip}/32 -j ACCEPT
       iptables -A INPUT -s ${vars.haServer2Ip}/32 -j ACCEPT
+      iptables -A INPUT -s ${vars.haStorageCidr} -j ACCEPT
     '';
   };
 }

modules/ipa/client.nix

@@ -0,0 +1,103 @@
+# Fully declarative FreeIPA domain membership.
+#
+# Configures security.ipa (SSSD, Kerberos, PAM, NSSwitch) and places a
+# pre-provisioned host keytab via sops-nix so no imperative ipa-client-install
+# step is needed after deployment.
+#
+# Usage (in a host.nix imports list):
+#   (import ../../modules/ipa/client.nix {
+#     keytabSopsFile = ../../secrets/<hostname>.keytab;
+#     caCertFile     = ../../certs/ipa-ca.crt;  # already committed — do not re-fetch
+#   })
+#
+# The host.nix networking block must also set:
+#   networking.domain   = vars.homeDomain;         # needed for Kerberos FQDN
+#   networking.nameservers = [ vars.domainControllerIp ];  # IPA DNS
+#
+# One-time operator setup per host (do this BEFORE deploying):
+#
+#   0. Generate SSH host keys and the host's age key for sops:
+#        scripts/secrets/sync-host-keys.sh <flake-target>
+#      This must run before step 1 so the host age key is in .sops.yaml
+#      and the keytab can be encrypted for the host to read at boot.
+#
+#   1. Add the IPA host account and produce the sops-encrypted keytab:
+#        scripts/ipa/create-nixos-ipa-host-account.sh [--ip <addr>] <hostname>
+#      The script handles ipa host-add, ipa-getkeytab, .sops.yaml patching,
+#      and sops encryption in one step. See the script header for details.
+#
+#   2. Wire up the host (see "Usage" above), then deploy:
+#        nixos-rebuild switch  (or create-proxmox-resource.sh)
+#      No further manual enrollment steps are required after deployment.
+#
+# Manual fallback (if the script isn't usable):
+#   a. On the FreeIPA server: ipa host-add <fqdn> [--ip-address=<ip>] --force
+#   b. On the FreeIPA server: ipa-getkeytab -s <ipa-server> -p host/<fqdn> -k /tmp/<host>.keytab
+#   c. From the repo root (path must match for sops creation rule to apply):
+#        cp /tmp/<host>.keytab secrets/<host>.keytab
+#        sops -e --input-type binary -i secrets/<host>.keytab
+#   d. Commit secrets/<host>.keytab and the updated .sops.yaml, then deploy.
+#
+# vars dependencies: homeDomain, ipaServer, domainControllerIp
+
+{ keytabSopsFile, caCertFile }:
+{ config, lib, pkgs, vars, ... }:
+
+let
+  realm = lib.strings.toUpper vars.homeDomain;
+  fqdn = "${config.networking.hostName}.${vars.homeDomain}";
+  # "sweet.home" -> "dc=sweet,dc=home"
+  basedn = lib.strings.concatMapStringsSep "," (c: "dc=${c}") (lib.strings.splitString "." vars.homeDomain);
+  # security.ipa.certificate expects a derivation (package), not a raw path.
+  caCertPkg = pkgs.writeText "ipa-ca.crt" (builtins.readFile caCertFile);
+in
+{
+  security.ipa = {
+    enable = true;
+    domain = vars.homeDomain;
+    realm = realm;
+    server = vars.ipaServer;
+    certificate = caCertPkg;
+    basedn = basedn;
+    ipaHostname = fqdn;
+    offlinePasswords = true;
+    cacheCredentials = true;
+  };
+
+  # Fetch SSH public keys from IPA so users can log in with the key stored
+  # in their IPA profile rather than needing ~/.ssh/authorized_keys on every
+  # host. sss_ssh_authorizedkeys queries SSSD (which queries IPA LDAP).
+  #
+  # /nix/store is 1775 (group-writable by nixbld). OpenSSH 10.0+ rejects
+  # AuthorizedKeysCommand binaries whose path contains any group-writable
+  # component, silently skipping the command. Copy to /usr/local/bin (all
+  # components root-owned, 755) so the path passes sshd's safety check.
+  systemd.tmpfiles.rules = [
+    "d /usr/local 0755 root root - -"
+    "d /usr/local/bin 0755 root root - -"
+    "C+ /usr/local/bin/sss_ssh_authorizedkeys 0555 root root - ${pkgs.sssd}/bin/sss_ssh_authorizedkeys"
+  ];
+
+  services.openssh.extraConfig = ''
+    AuthorizedKeysCommand /usr/local/bin/sss_ssh_authorizedkeys %u
+    AuthorizedKeysCommandUser nobody
+  '';
+
+  # Create the home directory on first login if it doesn't exist yet.
+  # IPA users have no pre-created home on the host; without this sshd
+  # opens a session to a non-existent directory and resets the connection.
+  security.pam.services.sshd.makeHomeDir = true;
+
+  # Host keytab: pre-provisioned on the IPA server, sops-encrypted binary.
+  # Placed at /etc/krb5.keytab before SSSD starts so the host authenticates
+  # to IPA without running ipa-client-install.
+  sops.secrets."ipa-host-keytab" = {
+    sopsFile = keytabSopsFile;
+    format = "binary";
+    path = "/etc/krb5.keytab";
+    owner = "root";
+    group = "root";
+    mode = "0600";
+    restartUnits = [ "sssd.service" ];
+  };
+}

modules/tailscale/ts-dns-forwarder.nix

@@ -0,0 +1,52 @@
+{ vars, ... }:
+
+{
+  # Run dnsmasq on the LAN interface as a forwarding-only resolver for
+  # *.ts.net (Tailscale MagicDNS names). FreeIPA's bind-dyndb-ldap
+  # cannot reach 100.100.100.100 (Tailscale's internal resolver) directly
+  # because the DC is not a Tailscale node. This host IS a Tailscale node
+  # and can reach 100.100.100.100 via its tailscale0 interface, so it
+  # acts as an intermediary: FreeIPA has a conditional forward zone for
+  # ts.net pointing here (vars.tailscaleRouterIp), and this dnsmasq
+  # instance forwards those queries onward to Tailscale's resolver.
+  #
+  # Configure FreeIPA once after deploying this host:
+  #   kinit admin
+  #   ipa dnsforwardzone-add ${vars.tailnetDomain} \
+  #     --forwarder=${vars.tailscaleRouterIp} \
+  #     --forward-policy=only
+  # Note: IPA refuses to shadow ts.net (a real public TLD); use the
+  # tailnet-specific subdomain (vars.tailnetDomain) instead.
+  services.dnsmasq = {
+    enable = true;
+    settings = {
+      # Listen only on the LAN interface — not tailscale0 or loopback.
+      # bind-interfaces prevents dnsmasq from binding to 0.0.0.0 and
+      # then filtering by interface later; combined with `interface` this
+      # ensures it genuinely listens only on eth0.
+      bind-interfaces = true;
+      interface = [ vars.lxcLanInterface ];
+
+      # Forward-only: no local /etc/hosts or /etc/resolv.conf reading,
+      # no negative caching of NXDOMAIN for names this instance doesn't
+      # serve. All ts.net queries come from FreeIPA's conditional forwarder
+      # and must be answered by Tailscale's resolver.
+      no-hosts = true;
+      no-resolv = true;
+
+      # Tailscale's internal "Quad100" resolver — reachable from any
+      # Tailscale node via the tailscale0 interface. Scoped to the
+      # specific tailnet subdomain (vars.tailnetDomain) rather than
+      # all of ts.net: FreeIPA refuses to shadow ts.net (a real public
+      # TLD with DNSimple nameservers) so the conditional forward zone
+      # in FreeIPA must use the tailnet-specific subdomain instead:
+      #   ipa dnsforwardzone-add ${vars.tailnetDomain} \
+      #     --forwarder=${vars.tailscaleRouterIp} \
+      #     --forward-policy=only
+      server = [ "/${vars.tailnetDomain}/100.100.100.100" ];
+    };
+  };
+
+  networking.firewall.allowedUDPPorts = [ 53 ];
+  networking.firewall.allowedTCPPorts = [ 53 ];
+}

scripts/env.sh

@@ -88,6 +88,17 @@ export NIX_CACHE_HOST
 : "${LAN_DOMAIN:=gitea.lan.ddnsgeek.com}"
 export LAN_DOMAIN
 
+# Matches variables.nix's homeDomain -- the base LAN domain for service
+# subdomains, FreeIPA Kerberos realm, and host FQDNs.
+: "${HOME_DOMAIN:=sweet.home}"
+export HOME_DOMAIN
+
+# Matches variables.nix's ipaServer -- the FreeIPA server hostname.
+# scripts/ipa/create-nixos-ipa-host-account.sh SSHes here to run
+# ipa host-add and ipa-getkeytab.
+: "${IPA_SERVER:=domain-controller.sweet.home}"
+export IPA_SERVER
+
 # nix_extra_opts: call as a plain statement (NOT inside $(...)/<(...) --
 # that forks a subshell, and the whole point is exporting a decision back
 # into *this* shell) to populate the global NIX_OPTS array with whatever

scripts/ipa/create-nixos-ipa-host-account.sh

@@ -0,0 +1,295 @@
+#!/usr/bin/env bash
+# Add a NixOS host to the FreeIPA domain and produce a sops-encrypted keytab
+# at secrets/<hostname>.keytab, ready for modules/ipa/client.nix.
+#
+# One command replaces three error-prone manual steps:
+#   1. ipa host-add on the domain controller
+#   2. ipa-getkeytab on the domain controller + SCP back
+#   3. sops encrypt in-place (must be at secrets/<hostname>.keytab for
+#      the creation rule to match -- the common mistake that breaks sops)
+#
+# Usage:
+#   scripts/ipa/create-nixos-ipa-host-account.sh [options] <hostname>
+#
+# Arguments:
+#   <hostname>       Short hostname, e.g. "tailscale-router". The FQDN is
+#                    derived as <hostname>.<HOME_DOMAIN>.
+#
+# Options:
+#   --ip <addr>      Register this IP with the IPA host record (optional).
+#   --dc <host>      SSH to this host to run IPA commands.
+#                    Default: $IPA_SERVER (from env.sh / environment).
+#   --dc-user <u>    SSH user on the domain controller. Default: wayne.
+#   --dry-run        Print what would be done without making any changes.
+#   -h, --help       Show this message.
+#
+# Prereqs:
+#   1. Run from the repo root (so .sops.yaml and secrets/ are found).
+#   2. SSH access to the domain controller as --dc-user (default: wayne)
+#      with passwordless sudo (or sudo cached). IPA commands and kinit run
+#      as root via sudo so the Kerberos ticket is in root's cache where all
+#      ipa tools expect it. If there's no valid ticket, the script runs
+#      `sudo kinit admin` interactively — you'll be prompted for the IPA
+#      admin password once. The password never touches this script.
+#   3. The host's age key(s) must already be in .sops.yaml. Run
+#      scripts/secrets/sync-host-keys.sh <flake-target> first so the host
+#      can decrypt its own keytab on boot. This script adds the .sops.yaml
+#      creation rule for secrets/<hostname>.keytab automatically, but the
+#      host age key anchor (&lxc-<hostname> etc.) must already exist —
+#      otherwise only the admin key can decrypt the keytab and the deployed
+#      host will fail to read it.
+#   4. sops in PATH, or Nix available to run it via `nix run`.
+
+set -euo pipefail
+
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+REPO_ROOT="$(cd "$SCRIPT_DIR/../.." && pwd)"
+
+# shellcheck source=../env.sh
+source "${SCRIPT_DIR}/../env.sh"
+
+# --- Argument parsing ---
+
+DC_HOST="${IPA_SERVER}"
+DC_USER="wayne"
+IP_ADDR=""
+DRY_RUN=false
+TARGET=""
+
+usage() {
+  sed -n '/^# Usage:/,/^[^#]/{ /^#/{ s/^# \?//; p } }' "$0"
+  exit "${1:-0}"
+}
+
+while [[ $# -gt 0 ]]; do
+  case "$1" in
+    --ip)      IP_ADDR="$2";  shift 2 ;;
+    --dc)      DC_HOST="$2";  shift 2 ;;
+    --dc-user) DC_USER="$2";  shift 2 ;;
+    --dry-run) DRY_RUN=true;  shift ;;
+    -h|--help) usage 0 ;;
+    -*)  echo "Unknown flag: $1" >&2; usage 1 ;;
+    *)
+      if [[ -n "${TARGET}" ]]; then echo "Unexpected argument: $1" >&2; usage 1; fi
+      TARGET="$1"; shift
+      ;;
+  esac
+done
+
+if [[ -z "${TARGET}" ]]; then
+  echo "Error: hostname required." >&2
+  usage 1
+fi
+
+FQDN="${TARGET}.${HOME_DOMAIN}"
+KEYTAB_SECRET="${REPO_ROOT}/secrets/${TARGET}.keytab"
+# Temp path on the domain controller — use a name that won't collide.
+DC_TMP="/tmp/nixos-keytab-${TARGET}-$$.keytab"
+
+# --- Helpers ---
+
+log()  { echo "==> $*"; }
+logn() { echo "    $*"; }
+
+run() {
+  if $DRY_RUN; then
+    echo "[dry-run] $*"
+  else
+    "$@"
+  fi
+}
+
+dc_run() {
+  # Run a command string on the domain controller via SSH.
+  if $DRY_RUN; then
+    echo "[dry-run] ssh ${DC_USER}@${DC_HOST} $*"
+  else
+    ssh "${DC_USER}@${DC_HOST}" "$@"
+  fi
+}
+
+# --- Locate sops ---
+
+if command -v sops &>/dev/null; then
+  SOPS_CMD=(sops)
+else
+  log "sops not in PATH — will use 'nix run nixpkgs#sops'"
+  SOPS_CMD=(nix run "nixpkgs#sops" --)
+fi
+
+# --- Preflight checks ---
+
+cd "${REPO_ROOT}"
+
+[[ -f .sops.yaml ]] || { echo "Error: .sops.yaml not found — run from repo root." >&2; exit 1; }
+[[ -d secrets  ]]   || { echo "Error: secrets/ not found — run from repo root."   >&2; exit 1; }
+
+# --- Step 1: Ensure .sops.yaml has a creation rule for this keytab ---
+#
+# sops matches creation rules against the PATH of the file being encrypted,
+# not the output path. To match secrets/<hostname>.keytab, the file must
+# already be at that path when sops -e -i is called. The creation rule must
+# also exist at that point or sops will refuse with "no matching creation
+# rules found."
+
+log "Checking .sops.yaml for creation rule: secrets/${TARGET}.keytab"
+
+RULE_EXISTS=false
+# Match "path_regex: secrets/<hostname>...keytab" — using .*keytab rather
+# than \.keytab because the file stores the regex verbatim (\.keytab = two
+# chars: backslash + dot), which a BRE \.  (= escaped literal dot) won't span.
+if grep -q "path_regex: secrets/${TARGET}.*keytab" .sops.yaml 2>/dev/null; then
+  RULE_EXISTS=true
+  logn "Rule already exists — skipping addition."
+fi
+
+if ! $RULE_EXISTS; then
+  # Collect which platform-variant age anchors exist in .sops.yaml for this
+  # hostname. The keytab is platform-agnostic (same FQDN regardless of
+  # whether lxc/proxmox/linode variant is deployed), so all platform anchors
+  # that have been registered get added as recipients.
+  RECIPIENTS=("*admin")
+  for platform in lxc proxmox linode; do
+    anchor="${platform}-${TARGET}"
+    if grep -q "^  - &${anchor} " .sops.yaml; then
+      RECIPIENTS+=("*${anchor}")
+    fi
+  done
+
+  if [[ ${#RECIPIENTS[@]} -eq 1 ]]; then
+    echo "Warning: no platform age keys found for '${TARGET}' in .sops.yaml." >&2
+    echo "         Run scripts/secrets/sync-host-keys.sh <flake-target> first," >&2
+    echo "         otherwise only the admin key can decrypt the keytab and the" >&2
+    echo "         deployed host won't be able to read it at boot." >&2
+    echo "         Continuing with admin-only encryption..." >&2
+  fi
+
+  # Build the indented recipient list for the YAML block.
+  RECIPIENT_YAML=""
+  for r in "${RECIPIENTS[@]}"; do
+    RECIPIENT_YAML+="          - ${r}"$'\n'
+  done
+  RECIPIENT_YAML="${RECIPIENT_YAML%$'\n'}"  # strip trailing newline
+
+  NEW_RULE="
+  # Host keytab for ${TARGET} FreeIPA enrollment (binary sops file).
+  # Generated by scripts/ipa/create-nixos-ipa-host-account.sh.
+  - path_regex: secrets/${TARGET}\\.keytab\$
+    key_groups:
+      - age:
+${RECIPIENT_YAML}"
+
+  if $DRY_RUN; then
+    echo "[dry-run] Would append to .sops.yaml:"
+    echo "${NEW_RULE}"
+  else
+    logn "Adding creation rule (recipients: ${RECIPIENTS[*]})"
+    printf '%s\n' "${NEW_RULE}" >> .sops.yaml
+    logn "Added."
+  fi
+fi
+
+# --- Step 2: Add IPA host account (idempotent) ---
+
+log "Adding FreeIPA host account: ${FQDN}"
+
+# Ensure there's a valid admin Kerberos ticket on the DC.
+# ipa host-add and ipa-getkeytab both need one. All IPA commands run via
+# sudo so the ticket must be in root's cache — check and refresh as root.
+# ssh -t allocates a PTY so kinit (and sudo if needed) can prompt normally;
+# no password ever touches this script or the shell history.
+if ! $DRY_RUN; then
+  if ! ssh "${DC_USER}@${DC_HOST}" "sudo klist -s" &>/dev/null; then
+    log "No valid Kerberos ticket on ${DC_HOST} — running sudo kinit admin"
+    ssh -t "${DC_USER}@${DC_HOST}" "sudo kinit admin"
+    if ! ssh "${DC_USER}@${DC_HOST}" "sudo klist -s" &>/dev/null; then
+      echo "Error: kinit admin failed or produced no valid ticket." >&2
+      exit 1
+    fi
+  else
+    logn "Kerberos ticket on ${DC_HOST} is valid."
+  fi
+fi
+
+IP_FLAG=""
+[[ -n "${IP_ADDR}" ]] && IP_FLAG="--ip-address=${IP_ADDR}"
+
+# --force: create the host record even if DNS doesn't resolve it yet.
+if $DRY_RUN; then
+  echo "[dry-run] ssh ${DC_USER}@${DC_HOST} sudo ipa host-add '${FQDN}' ${IP_FLAG} --force"
+else
+  HOST_ADD_OUT=$(ssh "${DC_USER}@${DC_HOST}" "sudo ipa host-add '${FQDN}' ${IP_FLAG} --force 2>&1") \
+    && HOST_ADD_RC=0 || HOST_ADD_RC=$?
+  if [[ $HOST_ADD_RC -eq 0 ]]; then
+    echo "${HOST_ADD_OUT}"
+  elif echo "${HOST_ADD_OUT}" | grep -q "already exists"; then
+    logn "(host already registered)"
+  else
+    echo "Error: ipa host-add failed (exit ${HOST_ADD_RC}):" >&2
+    echo "${HOST_ADD_OUT}" >&2
+    exit 1
+  fi
+fi
+
+# --- Step 3: Fetch the keytab from the domain controller ---
+
+log "Fetching keytab for host/${FQDN}"
+
+# Remove the plaintext keytab if the script aborts before encryption completes.
+# The trap is cleared at the end of step 4 once sops has encrypted it in-place.
+trap 'rm -f "${KEYTAB_SECRET}"' EXIT
+
+dc_run "sudo ipa-getkeytab -s '${IPA_SERVER}' -p 'host/${FQDN}' -k '${DC_TMP}'"
+
+if $DRY_RUN; then
+  echo "[dry-run] Would stream ${DC_USER}@${DC_HOST}:${DC_TMP} → secrets/${TARGET}.keytab"
+else
+  logn "Streaming keytab from ${DC_HOST}:${DC_TMP} → secrets/${TARGET}.keytab"
+  # scp can't read a root-owned temp file as ${DC_USER}; pipe through sudo cat instead.
+  ssh "${DC_USER}@${DC_HOST}" "sudo cat '${DC_TMP}'" > "${KEYTAB_SECRET}"
+
+  logn "Removing temp file on ${DC_HOST}"
+  dc_run "sudo rm -f '${DC_TMP}'"
+fi
+
+# --- Step 4: Encrypt in-place ---
+#
+# The file must already be at secrets/<hostname>.keytab (done above) so
+# sops matches the creation rule by path. Using -i (in-place) rather than
+# stdout redirect keeps the path intact through the encrypt call.
+
+log "Encrypting secrets/${TARGET}.keytab in-place with sops"
+run "${SOPS_CMD[@]}" -e --input-type binary -i "${KEYTAB_SECRET}"
+
+# Encryption succeeded — the file is now sops-encrypted; cancel the cleanup trap.
+trap - EXIT
+
+# --- Done ---
+
+if ! $DRY_RUN; then
+  echo ""
+  echo "Done. secrets/${TARGET}.keytab is sops-encrypted and ready."
+  echo ""
+  echo "Next steps:"
+  echo "  1. Verify: grep '\"data\": \"ENC' secrets/${TARGET}.keytab"
+  echo "  2. Stage and commit:"
+  echo "       git add secrets/${TARGET}.keytab .sops.yaml"
+  echo "       git commit -m 'secrets: add IPA keytab for ${TARGET}'"
+  echo "  3. Add to hosts/${TARGET}/host.nix (networking block and imports):"
+  echo ""
+  echo "       networking = {"
+  echo "         hostName = \"${TARGET}\";"
+  echo "         domain   = vars.homeDomain;          # required for Kerberos FQDN"
+  echo "         nameservers = [ vars.domainControllerIp ];  # IPA DNS"
+  echo "         ..."
+  echo "       };"
+  echo ""
+  echo "       imports = ["
+  echo "         (import ../../modules/ipa/client.nix {"
+  echo "           keytabSopsFile = ../../secrets/${TARGET}.keytab;"
+  echo "           caCertFile     = ../../certs/ipa-ca.crt;"
+  echo "         })"
+  echo "       ];"
+  echo ""
+  echo "  4. Deploy: nixos-rebuild switch (or create-proxmox-resource.sh)"
+fi

secrets/nix-cache.keytab

@@ -0,0 +1,26 @@
+{
+	"data": "ENC[AES256_GCM,data:z2bazlADvtWkGcY4an7NgZgIDSDq8KmYpSq8tcBleW/33HlElMNhdmje8m8hd7WxgrVvCQDdlAfodBLj2mjbgSwBptlPX2zbwcmJdm0g0Ope+YyQZucIio7NnBaYa+OK8meWqmxO2WEeOk+hnNfNPbt8MkzF/FMMbP8xv9wSTKP9CDdmO7s8rdg8G1JxVfn9dyaSDUTuA2JGNtbh+osd4CtNCV/bc84MjXDZTgTfT0W/uv8VH3iPNT7BhQbU9FIY4dsFRYBf758VtJ+3mTBiQkR38IevJBvhFB7Wiqn118LSBgjdTKJnBwmGo6lMdo0LRYHEgUnb2ejhWMNie19x+LEAErDki0RBmjc2BbnOF908kUlW2fUPo5fz/hlfqlhDLS1uOxESKhfnKt7s5qzWiMX/nohpknVfyMbmu9j/M571z9sgFnJAylpW3NLp53lX8N9mINwRGXsyL/ijbNE=,iv:M/MNquAGN+lIIyVVvFRgKR6DKAhLclc/OY1HV5Xwoog=,tag:eEuURMErSqsoh+l9ZaHY9Q==,type:str]",
+	"sops": {
+		"age": [
+			{
+				"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBqZlUxRG0zR3IzMlpDL3Vl\nNmRWQXUvc1NDek5wbWtKVEFTcTlxL3ZoWldNCmJVMkFtbDkxN1FGQ2VLTlhBUW5Q\nZ3VzL0UydUQ2YnlUMmtqa1Z0d0FSVFUKLS0tIGJFelc4Rm84T3ZHSGZDdnNUbUFM\nRXZHV3N3aVlSOXhUZk04UFRMWU5TbFUKhPU80PVYuDFUCxu1CA8+W8bqkr+Ne2fh\n+nBUPJbGxfN9TyD9tUC77AMbcL1R2L5x+SSAh0bEgSWE24/RjsuVKw==\n-----END AGE ENCRYPTED FILE-----\n",
+				"recipient": "age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad"
+			},
+			{
+				"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSB3M1o3S2FibHV6N2tIOFEx\nRytJRDFIUU05azNDbWlpaDdFQXFRWlBUNnlFCnBwNVB0SEVwL3NWNS9aeG4xSUI1\nV3NOcUFxUUhaODYyWXdFMEhWeFpvancKLS0tIHY4NHFQRGJwUURQbWZ2cGlSdm9s\nOFJodGZkekk3UnBRRUwxb2YrQ1ZPcU0K0tCapb1hfVHFSNpmESXexYa5k9OE9Tha\n51QpU4mZHKGrnWPK/kyj7rHiz95TLsmwUdA8Q2hOiYNSxEaVBjYDQw==\n-----END AGE ENCRYPTED FILE-----\n",
+				"recipient": "age1jcx3yajjhghn8qh8za3yeu8nxykzlg3p4nrv03vnfvzl0mzayg2qmg940e"
+			},
+			{
+				"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBkTmNrbUFoVFVGcytzQkk1\nMUxDdmJGL0xDcUNZaDFRQnUwNXoyMU90SEVvCi9EaTlVOGlMeUZtQzRJS1J2TTJY\neWdkMGNFMWZzQXVKOU5KcXVvalk1ekkKLS0tIDN2MlRQcG5aQnN3bUMrSDdvc09X\nM29hQ0pJRzk1amRHaS9mRlhrb2FMZG8KEWkSSP+MqGRU75qo7ctOCL7qHhyCM3l4\nL+ga1XOKxRsQkKQPozCi5Bm+k28W9hIDaC34Rw9difxICM9Z1rAbOA==\n-----END AGE ENCRYPTED FILE-----\n",
+				"recipient": "age1ufg390ydrmma849t9xfkxxl5xvdkk6mngnlzhmy7mvuaje8sgcmsmnq6l7"
+			},
+			{
+				"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA1TUtxVjJ2STFpU3RNdWpJ\nVjcwUHVORVN6L1pKVC9TeWt4cTNoR2pPWVRBCkR4QVJ1bHFUa2Z5aWw1bG0vQWVy\ncjNGRDl5REZzbzdZWTFMRkU1eHFTc1kKLS0tIHNLVDFiRkRKTHhrSEx2S0J1R3cx\nSkdEQWJya1ptTTRqUjJZT3FFaFhkd0kKgecHrnzW9+Eb+b7c0z1yR+Y0Czsr9Kjh\nx1UUOfleHntJUCs8oYcOogKknEnhBJJoJ5oe/gWruRSwle1fs3cBqQ==\n-----END AGE ENCRYPTED FILE-----\n",
+				"recipient": "age1jlltcv5jcnm40z5k0q6hv053k2rqpqvemtuecdwn527uw8uqz4es3x7m68"
+			}
+		],
+		"lastmodified": "2026-07-27T21:22:58Z",
+		"mac": "ENC[AES256_GCM,data:VG2ygV4X6yMxGlJgq3sN4GAzgVqiD06noyMxB2yb/FCmiFVYZAH/9LqF//G7MTInfIjFrTDyoHAny+m/ztUrJkHXI1Fzg0U8R/zYyQ6wj/GguL0gyhA70uriQhvHsRHefHPa7Km61Blo9cME6CBJWejtRvh1IMw9itAioVrSIZE=,iv:zjxNG6IYxkcNqLk08NADoDiIbS6at86y136SBzadW1U=,tag:sj4ZRR7ixU8h7aOUJmTCYg==,type:str]",
+		"version": "3.13.2"
+	}
+}

secrets/pxe-boot.keytab

@@ -0,0 +1,22 @@
+{
+	"data": "ENC[AES256_GCM,data:Q++XWxg9tvY7ugT8+8FWCC5jgOfQ1+LYLsnqN0/WGxTf5XT2VmoXvszcE/ow2BUOBG3qBTXS3OHYFPwmj1GgaBHB8rpdXX6+LveSBE2gmx1VR+NUDTxy+0/DBq411MK9n/J9eIYcybdFIE11biFSAob9EgfxBF5roCDXIPDPyVCSe6LyhNvqYPnGQsfHCbejSewLTcRQEiguP9BX96CpMPIpmaB9fHN25t5RWCgMI7MtacrRxRsyKg44+2FZstXdZrp2Wv9u86BxqdAFqtZE8qpPeGdrdzluZx9jhnw0wZPzHdKg5wS7/UrLCb0UxIQiDxDMDuuBuLGkKXfAhb6SGZU41wWAWYk548iGRUaG+79BO4HhRZNObOFvfsjpMXEfcH/Vbv/wHVY4OpJUPe/ZWK4wpL9YrY4nT0t62HH7MirOy1uhwLE50h2+6dHKj6ur5G7thkSqgzVWXQ==,iv:zaRBwS+gfXLhH30havn6Q2+oPWuLV3qBfbOj00kewlQ=,tag:Vr5iEQ2u+9YNahryhgzwSw==,type:str]",
+	"sops": {
+		"age": [
+			{
+				"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSArTGJnaVhleUtsWnlITE1s\nNmRCaW1QWTFNSG5LRFdmb1lzRlV5NWl3YTBNCmF6eUN6RkJBZzc0MmJJa0dKTW01\ncVh4K1VLR2lURUpKQXpxNGpQNnpSUlUKLS0tIFJONnJFWkNCR3pqalRsUW9POVBj\nQ0pFQ3ltKzBETTVXTW5sV1ppWTFJc1kKzxUboNZO+Nwn2eTWy11VP9w1pRswCHaJ\nE2dYU0oUOClVzc0oSuIJxraG6TPj1N4WGC24gS+UmpkmSuCiOeZBsw==\n-----END AGE ENCRYPTED FILE-----\n",
+				"recipient": "age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad"
+			},
+			{
+				"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBDSmxNR1I3dUFKT0xUVG9h\nWkRIakNVeWRQOEN3blNRVjZlWHF4K2NRa0hBClRiOXlmTTJ4T2JTUEw2c1l0R2N2\nMnRwdDA5bEZlQWJRTm9vUmNKclBSU1EKLS0tIFcyeDFjbTZyVEVDUjN1VzU1VHly\nNWNDMW9rTXY2bHNWYVR0SmtMckovUzQKhTWr6yFVW9am3okCiIswwqR5+/p9OLmB\nWCgPtwoFaBt1RjUXPK4/eS4LlucR2K6V/mNMn4xVsnkIl193U9632g==\n-----END AGE ENCRYPTED FILE-----\n",
+				"recipient": "age16j42pdc5dr6wnj7xayhkqdj2rny9u68fcqejs50hqq42scssh4gsnrrnlt"
+			},
+			{
+				"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA2ME9CbmVGcENRWksyL0pW\nOEJyUGhpbGMwWlBhVXBSeXQ2MW1EWnFuR0E4CnMwU0pjdk1YMzF5ZEhTVFlBaHZq\nam94UWVGbjhZSEx6VHBmem9JRWgwYzAKLS0tIHFJZWRyRjRHNzhXdDJSYWN3bDlR\nYVp3eGJWWkh3Y09ZWElyclZQN1ZSVFkKjR32//EcFAdMjVlNgky5zvVkwXwEN68D\nrkTuHKjiO5aV7yAQGPkdNw0UM0oRGF0u4YF3oOUcZfSvnKgDeoi2Zw==\n-----END AGE ENCRYPTED FILE-----\n",
+				"recipient": "age1ug787sgt6st6k82fgkrug2lzltw4qsukrrqqs3w27ewwqj8rg4hsxcmylz"
+			}
+		],
+		"lastmodified": "2026-07-28T00:27:46Z",
+		"mac": "ENC[AES256_GCM,data:AbJIHYcFpeanQsJ3x7RPL9Yjlg5BJgkepKax0fL9L/PpA03Antab93iUNG95Mp6k/duovp8Jm445lbuppDZq1dh9ij/deBa8GbzJ50wwEe9zMc3EwRKScpqZEhRPF7KlJsIjsHJyd8NkcI5ji49XkHb4Ae1//8zG5HpVgy+3b04=,iv:uxQCbMwMIfP5S1dbsvIx3F79YWEguxwox8T0YZvUBdc=,tag:3utjmBGDmPc8q4JjaXvCkA==,type:str]",
+		"version": "3.13.2"
+	}
+}

secrets/tailscale-router.keytab

@@ -0,0 +1,26 @@
+{
+	"data": "ENC[AES256_GCM,data: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,iv:kUlVXF4Yl5HGvoLwu9loiuuDVtz0kARRiUU3K+BPL2A=,tag:pVaGzQAX9Etoqc5XMGmNeg==,type:str]",
+	"sops": {
+		"age": [
+			{
+				"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSB6OUVUdkoxM1M5THlYZ1ky\nYWJ5RjhtRGoxTldwRkI2T1p6dHR4Y3gwR1ZrCjRDS1hTM01lZ0FSalBYQ1B0bENs\nUytXNmlrUkV4TmJkMUM1QW1ZaExIcGMKLS0tIHdHKzdEcUxvM0ZYUEp0a2d6SHp5\nYXQydy9uNG15V2FhUUd4NEFTMTNNMEUKkIzKEoYzoVs+nhnpkHFgDkQqrWykatND\ntsNxcr1SXSKeEW1m/QpXZnn/aW3zSQR09PqOHf7PYU47/AdkwrUaAg==\n-----END AGE ENCRYPTED FILE-----\n",
+				"recipient": "age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad"
+			},
+			{
+				"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSByZENrck42dWJjR2hYUVBl\ncERtRjR6dTdING5nWXlBc3o3eXFhaSs5NkFRCk43QXFUeTBJR0U5dG9YTDRmQ0Yx\naEo2blUvUXNZY3dpbEZRTUx1elNzdkkKLS0tIHJwNjRNM3V6WktWZ1BlUUtLRTNI\nMTVEbCtYbllIbTdxTGozWUluS3pIRXMKZCruDIkD/JofdAHWgPuaaKTDsz408ZkY\n77mhO8J+kd03qwt6qhFC5KF1lyjhwEnqrOE195+R/8Yl7hA/DsL2ZQ==\n-----END AGE ENCRYPTED FILE-----\n",
+				"recipient": "age1k7d2du5mejsmv5rzavm4xwgpthqvcfsehduquv28nzs53zppa3kqngfxq2"
+			},
+			{
+				"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBxaC95RjYybzVlU2tYdHdU\naGJ4M2IvNkJwVlNIU0VCZEFUZk5VaksrVnpFCmJXS3luTG9WejR0Rk9DbHA3dngy\nRElFWjU1N2xuc3JaKzQ0L0U2Yktib1kKLS0tIFlrK3F0ZFh5Ync3ejVWMzRKTUx2\nZDhxdEMwa3B4TFZUcWdTdktDeGt1QUEKfgYnK2lW3cZuJGaw+bAKDipLuC4S5vK2\nxK2eJB5TP/xXrp0F3lx9sc2b1FOY9Vt9IQ7zVlBqJFkzJrcw8zYJJw==\n-----END AGE ENCRYPTED FILE-----\n",
+				"recipient": "age1zhfyuzlq40reuqlr34gf77852nhs3t6mqfzrqmas8z6sxk7tcfhsungrm0"
+			},
+			{
+				"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBwOGFkSXNxTUIzLzR1Skk5\nMGZveHFDN3YwVmpwT3VTYkppWEU1aGVpdkhRCjZtRC92bVphd0ZFbzFxVzRUcGk4\nMUd1aWdEbFRaM01FT25JSVRoMTRsNUUKLS0tIDAybmcrYjFVWkFYaGY5TFZjcjFO\nYlZoQjJjN2lFNzd4RlJuSHFlRlNCOFEKgUIPnL2/OJgz9oMYt86/llHa7adTkhs6\n8yGYGV1wtU9aYtUMIR907SfYyZ6M4z8jH2wwzpQLbwQQMLgkejl1jg==\n-----END AGE ENCRYPTED FILE-----\n",
+				"recipient": "age1f7usptjx9rv4rxauasve200gxtdt9jkqhhdqstlf20wvlm7u75rsjfw50m"
+			}
+		],
+		"lastmodified": "2026-07-27T23:14:51Z",
+		"mac": "ENC[AES256_GCM,data:CYhzR0Y29GXvWUBbb13s16v9hDQ4k4Xmd4FUpcyNtHe0L/IrDGkx1WHzAohNGZjGMNB9W3BgiEH85OoOo8r1F82El4/8s2prEJi8AARvQU3+2cmRjjhNCCYQWmJkoF/cZNpw6nVyWzZdfUpPvHjbuf6utlI3rtR0qiCpSo/32S0=,iv:XLKTU2Ute4jMkfRAbXiVGxqP9+fjSs6HwRv1JfTTe7w=,tag:oIqS/1HWQZ7mLWaO7GwLFA==,type:str]",
+		"version": "3.13.2"
+	}
+}

variables.nix

@@ -4,9 +4,20 @@
   homeDomain = "sweet.home"; # base LAN domain for service subdomains (pve., docker.)
   tailnetDomain = "tail13f623.ts.net"; # Tailscale MagicDNS suffix
   lanCidr = "192.168.2.0/24"; # LAN subnet
-  pxeServerIp = "192.168.2.223"; # pxe-boot host's LAN IP
-  pbsIp = "192.168.2.244"; # Proxmox Backup Server LAN IP
-  domainControllerIp = "192.168.2.253"; # FreeIPA domain controller / primary DNS
+  lanGateway = "192.168.2.254"; # LAN default gateway (router)
+  lanPrefixLength = 24; # LAN subnet prefix length (/24 = 255.255.255.0)
+  lxcLanInterface = "eth0"; # LAN NIC name in LXC containers (set by Proxmox --net0 name=eth0)
+  vmLanInterface = "ens18"; # LAN NIC name in Proxmox VMs (virtio, first NIC)
+  vmStorageInterface = "ens19"; # storage NIC name in HA server VMs (virtio, second NIC on vmbr1)
+  pxeServerIp = "192.168.2.223"; # pxe-boot LXC container LAN IP
+  nixCacheIp = "192.168.2.224"; # nix-cache LXC container LAN IP
+  tailscaleRouterIp = "192.168.2.222"; # tailscale-router LXC container LAN IP
+  torRelayIp = "192.168.2.221"; # tor-relay LXC container LAN IP
+  serverIp = "192.168.2.226"; # server (NFS/ZFS) Proxmox VM LAN IP
+  dockerIp = "192.168.2.225"; # docker Proxmox VM LAN IP
+  pbsIp = "192.168.2.244"; # Proxmox Backup Server LAN IP (not NixOS-managed)
+  domainControllerIp = "192.168.2.253"; # FreeIPA domain controller / primary DNS (not NixOS-managed)
+  ipaServer = "domain-controller.sweet.home"; # FreeIPA server hostname (used by security.ipa and Kerberos; must be a resolvable FQDN, not an IP)
 
   # Cross-host references (LAN hostnames/users other hosts reach over the network)
   nixCacheHost = "nix-cache"; # substituter/remote-builder hostname
@@ -70,16 +81,20 @@
   primaryUser = "nixos";
 
   # HA file server cluster
-  # haServer1Ip / haServer2Ip: static LAN IPs for both HA nodes (must be
-  # fixed — DRBD and corosync ring addresses are baked into the NixOS config).
+  # LAN IPs (vmbr0 / ens18) — client-facing: iSCSI initiators, NFS, management.
+  # Storage IPs (vmbr1 / ens19) — isolated internal bridge, used for DRBD
+  # replication and Corosync heartbeat only; never leaves pve1.
   # haServerVip: floating virtual IP managed by Pacemaker's IPaddr2 resource;
   # NFS and iSCSI clients connect here regardless of which node is Active.
-  # Set all three to real values in variables.nix before deploying.
   haServer1Host = "ha-server-1";
   haServer2Host = "ha-server-2";
-  haServer1Ip = "192.168.2.200"; # TODO: confirm production IP
-  haServer2Ip = "192.168.2.201"; # TODO: confirm production IP
-  haServerVip = "192.168.2.202"; # TODO: confirm floating VIP
+  haServer1Ip = "192.168.2.228"; # LAN IP, node 1
+  haServer2Ip = "192.168.2.227"; # LAN IP, node 2
+  haServerVip = "192.168.2.229"; # floating VIP (Pacemaker IPaddr2)
+  haServer1StorageIp = "192.168.4.228"; # storage-net IP, node 1 (vmbr1 / ens19)
+  haServer2StorageIp = "192.168.4.227"; # storage-net IP, node 2 (vmbr1 / ens19)
+  haStorageCidr = "192.168.4.0/29"; # storage subnet — internal to pve1 only
+  haStoragePrefixLength = 29; # storage subnet prefix length (/29)
   haStorageRoot = "/srv/ha-data"; # XFS-over-DRBD mount point on the Active node
   haIscsiIqn = "iqn.2026-01.home.sweet:ha-storage";