feat(beszel): add beszel agent to tailscale-router

Wires beszel-agent into all tailscale-router variants (lxc/linode/proxmox)
by importing enable-agent.nix in the build type and host-token.nix in the
host file. Adds the sops creation rule for secrets/tailscale-router.yaml
(all three platform variants as recipients). The secrets file must be
created manually before deploying — see instructions in PR.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

.sops.yaml

@@ -77,6 +77,14 @@ creation_rules:
           - *admin
           - *lxc-tor-relay
 
+  - path_regex: secrets/tailscale-router\.yaml$
+    key_groups:
+      - age:
+          - *admin
+          - *linode-tailscale-router
+          - *lxc-tailscale-router
+          - *proxmox-tailscale-router
+
   # gui-host-specific secrets (currently: wifi-password, see
   # modules/networking/wifi.nix). Only *lxc-gui has a registered key today
   # -- proxmox-gui/linode-gui/baremetal-gui haven't been provisioned via

hosts/tailscale-router/host.nix

@@ -1,8 +1,19 @@
 _:
 
 {
+  imports = [
+    (import ../../modules/beszel/host-token.nix {
+      name = "tailscale-router";
+      sopsFile = ../../secrets/tailscale-router.yaml;
+    })
+  ];
+
   networking.hostName = "tailscale-router";
 
+  services.beszel.agent.environment = {
+    KEY = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFPR9kwtC4TAeTRu46A7+opZsYpxqkRJ+x/ZyB2GWCeG";
+  };
+
   # No networking.hostId: only ZFS-touching hosts (server, docker) need one
   # for pool-import safety, and this host does neither.
 

modules/build-types/tailscale-router.nix

@@ -1,8 +1,9 @@
-{ ... }:
+{ vars, ... }:
 
 {
   imports = [
     ../tailscale/subnet-router.nix
+    ../beszel/enable-agent.nix
   ];
 
   # "server", not "both": this build type advertises LAN subnet routes but
@@ -12,8 +13,33 @@
   # own setting) so the intent is clear at the build-type level.
   services.tailscale.useRoutingFeatures = "server";
 
-  # Forwarded subnet-router traffic arrives on tailscale0 already
-  # tailscale-authenticated -- the firewall's normal per-port allow-list
-  # would otherwise drop it. Standard NixOS/Tailscale subnet-router guidance.
-  networking.firewall.trustedInterfaces = [ "tailscale0" ];
+  # Advertise the LAN subnet so Tailscale peers can route back to LAN machines.
+  # Must also be approved in the Tailscale admin console (Machines → Edit route settings).
+  services.tailscale.extraUpFlags = [ "--advertise-routes=${vars.lanCidr}" ];
+
+  networking = {
+    # SNAT traffic from LAN machines going out through Tailscale so the remote
+    # peer sees it sourced from this router's Tailscale IP (100.x.x.x) rather
+    # than a raw LAN IP.  Without this, Tailscale drops the forwarded packets
+    # because the source is not a recognised Tailscale address.
+    #
+    # networking.nat.externalInterface alone does not insert a MASQUERADE rule
+    # (it only does so when internalInterfaces is also set).  We use
+    # extraCommands to add the rule into the nixos-nat-post chain that
+    # networking.nat.enable creates, and extraStopCommands to clean it up.
+    nat.enable = true;
+
+    firewall = {
+      # Forwarded subnet-router traffic arrives on tailscale0 already
+      # tailscale-authenticated -- the firewall's normal per-port allow-list
+      # would otherwise drop it. Standard NixOS/Tailscale subnet-router guidance.
+      trustedInterfaces = [ "tailscale0" ];
+      extraCommands = ''
+        iptables -t nat -A nixos-nat-post -s ${vars.lanCidr} -o tailscale0 -j MASQUERADE
+      '';
+      extraStopCommands = ''
+        iptables -t nat -D nixos-nat-post -s ${vars.lanCidr} -o tailscale0 -j MASQUERADE 2>/dev/null || true
+      '';
+    };
+  };
 }

modules/tailscale/subnet-router.nix

@@ -1,4 +1,4 @@
-_:
+{ pkgs, ... }:
 
 {
   imports = [ ./enable-service.nix ];
@@ -12,4 +12,24 @@ _:
     # instead of relaying through DERP.
     openFirewall = true;
   };
+
+  # Tailscale recommends these ethtool flags on the uplink interface to get
+  # full UDP GRO throughput on subnet routers (https://tailscale.com/s/ethtool-config-udp-gro).
+  # The interface is derived from the default route so it works regardless of
+  # what the NIC is named on a given host.
+  systemd.services.tailscale-udp-gro = {
+    description = "Enable UDP GRO forwarding on uplink for Tailscale subnet router";
+    after = [ "network-online.target" ];
+    wants = [ "network-online.target" ];
+    wantedBy = [ "multi-user.target" ];
+    path = [ pkgs.ethtool pkgs.iproute2 ];
+    serviceConfig = {
+      Type = "oneshot";
+      RemainAfterExit = true;
+      ExecStart = pkgs.writeShellScript "tailscale-udp-gro" ''
+        NETDEV=$(ip -o route get 8.8.8.8 | cut -f 5 -d " ")
+        ethtool -K "$NETDEV" rx-udp-gro-forwarding on rx-gro-list off
+      '';
+    };
+  };
 }

scripts/proxmox/create-proxmox-resource.sh

@@ -302,6 +302,12 @@ platform_prefix="lxc"
 [[ -z "$cores" ]] && cores="$PROXMOX_DEFAULT_CORES"
 [[ -z "$memory" ]] && memory="$PROXMOX_DEFAULT_MEMORY_MB"
 
+if [[ "$type" == "vm" && -n "$disk_size" ]]; then
+  echo "WARNING: --disk-size is LXC-only for create mode and is ignored for VMs." >&2
+  echo "  VM disk size comes from proxmoxImageSize in variables.nix (currently ${disk_size}G was requested)." >&2
+  echo "  To expand after creation, use: --modify --vmid <n> --grow-disk <GB>" >&2
+fi
+
 # --- discover / resolve the flake target from --host --------------------
 # Emits "<target>\t<hostName>" pairs for every ${platform_prefix}-* flake
 # target -- the one source both --list and the --host lookup below read

variables.nix

@@ -166,7 +166,7 @@
   # build (modules/disko/proxmox.nix, config.system.build.diskoImagesScript
   # — see docs/proxmox-images.md). Root fills whatever's left after the ESP
   # and swap partitions within this total.
-  proxmoxImageSize = "20G";
+  proxmoxImageSize = "50G";
 
   # nix-cache's Nix store garbage collection retention
   # (modules/nix-cache/server.nix).