Wires beszel-agent into all tailscale-router variants (lxc/linode/proxmox)
by importing enable-agent.nix in the build type and host-token.nix in the
host file. Adds the sops creation rule for secrets/tailscale-router.yaml
(all three platform variants as recipients). The secrets file must be
created manually before deploying — see instructions in PR.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
extraCommands runs after nixos-nat-post is deleted but before it is
re-created, so -A nixos-nat-post silently fails every time. POSTROUTING
is a built-in chain that always exists; target it directly instead.
The -C idempotency check prevents duplicate rules on firewall reloads.
Drop networking.nat.enable -- it was only needed for the sub-chain that
turned out to be the wrong target.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
networking.nat.externalInterface without internalInterfaces creates the
nixos-nat-post chain but inserts no MASQUERADE rule into it — confirmed
by inspecting the live firewall-start script on the deployed host.
Add the rule explicitly via firewall.extraCommands targeting nixos-nat-post,
scoped to LAN source traffic (vars.lanCidr) going out tailscale0.
extraStopCommands removes it on firewall stop.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Without SNAT on tailscale0, Tailscale drops forwarded packets from LAN
source IPs (192.168.2.x) because they are not recognised Tailscale
addresses. With networking.nat.externalInterface = "tailscale0", all
traffic leaving through the Tailscale tunnel is masqueraded to the
router's own Tailscale IP (100.x.x.x), making it indistinguishable from
locally-originated traffic. Conntrack handles the return path.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds a oneshot systemd service that sets ethtool rx-udp-gro-forwarding on
and rx-gro-list off on the default-route interface at boot, silencing
Tailscale's warning about suboptimal UDP GRO forwarding on subnet routers.
Interface is discovered dynamically via `ip route get` so it works on all
platforms regardless of NIC naming.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
--pre-format-files placed the key on the QEMU builder VM's rootfs, not the
target disk. nixos-install chroots into the target and runs sshd-keygen, which
found no key in the chroot and generated a fresh (unregistered) one. sops then
could not decrypt on first boot because the key didn't match .sops.yaml, leaving
both root and nixos with '!' in /etc/shadow even after mutableUsers = false was
set (hashedPasswordFile pointed to paths sops never wrote).
Fix modules/platforms/proxmox.nix to embed the clan SSH host key in
environment.etc via NIXOS_HOST_KEYS_DIR at eval time -- the same pattern
lxc.nix uses. nixos-install's own activation places the key on the target disk,
sshd-keygen finds it already present and skips generation, and sops decrypts
correctly on first boot. Includes the same preserveSshHostKey/restoreSshHostKey
activation scripts as lxc.nix so subsequent nixos-rebuild switch calls (without
NIXOS_HOST_KEYS_DIR) don't remove the key as "obsolete" from environment.etc.
Update create-proxmox-resource.sh: switch VM builds from
./result-<target> --pre-format-files ... --build-memory 2048
to
NIXOS_HOST_KEYS_DIR=$(pwd)/host-keys nix build --impure ... diskoImagesScript
./result-<target> --build-memory 2048
matching the LXC build path.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011uRcikkTp3D5VbXj2DwNpQ
Three bugs combined to leave every VM build with a shell but no boot disk:
1. The remote build script moved the raw image to /var/lib/vz/import/ before
qm importdisk could use it. If the mv failed (cross-filesystem copy, sudo
path, or any other reason) the remote script exited non-zero -- but the
local script's set -e handling of the SSH heredoc was inconsistent, so
qm create sometimes ran anyway, leaving a diskless VM shell.
Fix: skip the mv entirely. The diskoImagesScript writes <hostname>.raw into
its CWD (the remote repo dir, $out = $PWD at invocation). Import directly
from that path; clean it up after a successful import.
2. The qm importdisk output regex expected "Successfully imported disk as '...'"
but current Proxmox emits "unusedN: successfully imported disk '...'"
(lowercase, no "as"). The grep returned no match and exited 1.
3. The disk_id assignment used $(... | grep ...) without || true inside the
substitution. With set -euo pipefail, a non-zero grep exit aborts the
script before the fallback could run -- so the VM was always left with an
unattached unused0 disk.
Fix: update the primary regex to match the actual PVE format; add || true
inside the substitution so set -e never fires on a grep miss; add a qm
config fallback (scan for unusedN: lines) that works regardless of PVE
output format changes.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011uRcikkTp3D5VbXj2DwNpQ
When a proxmox-* disk image is built, activation runs during the image
build without a valid sops age key (the SSH host key doesn't exist yet),
so root and nixos land in /etc/shadow with locked '!' entries. With the
default mutableUsers = true, update-users-groups.pl preserves existing
shadow entries for accounts that already exist, so hashedPasswordFile is
silently ignored on every subsequent boot — passwords are never fixed.
Setting mutableUsers = false forces update-users-groups.pl to apply
hashedPasswordFile unconditionally on every activation. On first real
boot the sops-decrypted hash is now written regardless of whether the
account already existed in shadow from the image build.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011uRcikkTp3D5VbXj2DwNpQ
qm importdisk in QEMU 11.x outputs lowercase "successfully imported disk
as '...'" rather than the capitalised form the original grep expected.
The case mismatch made disk_id always empty, which caused the script to
exit 1 after qm create had already run -- leaving the VM with only an
EFI disk, no scsi0, and boot order still set to net0.
Fix by adding -i (case-insensitive) to the grep. Both the old capitalised
format (where the disk id had an "unused0:" prefix inside the quotes) and
the new lowercase format are handled correctly: the sed strip of unused0:
is preserved for backward compatibility, and the regex result is identical
either way.
Also add an early warning when --disk-size is passed for --type vm: the
flag is LXC-only for create mode and was silently ignored, leaving users
expecting a different size than the proxmoxImageSize in variables.nix.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
After the clan vars migration all keys are in vars/per-machine/, not
host-keys/. Update:
- File header: "existing clan var is never overwritten" (not host-keys/ file)
- Header --remove/--regenerate description: mention clan vars as primary
- usage() --remove, --regenerate-all-keys, --dry-run text
- cmd_remove/cmd_regenerate_all empty-guard messages
- README.md vars/per-machine/ row: "all deployed hosts" (not "LXC hosts")
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01B2EJ4qTsM5KUqhS5c3GAwx
locally_managed_hosts() only scanned host-keys/ (now empty for all
current targets), so --remove and --regenerate-all-keys silently did
nothing. Fix:
- locally_managed_hosts(): also yields targets from
vars/per-machine/*/openssh/ssh_host_ed25519_key/secret, deduped
- cmd_remove: shows [clan-vars] or [host-keys/] label per entry;
deletes vars/per-machine/<target>/openssh/ in addition to host-keys/
- cmd_regenerate_all: same -- removes clan vars dirs before regenerating
Also update CLAUDE.md and README.md to reflect that all flake targets
now use clan vars (not just lxc-*); host-keys/ is only for the
auto-installer's own pre-seeding path.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01B2EJ4qTsM5KUqhS5c3GAwx
Adds vars/per-machine/<target>/openssh/ for every flake target except
lxc-tor-relay and lxc-nix-cache (already committed). 18 targets recovered
from pve1 host-keys/ backup; lxc-gui and proxmox-minimal have no prior
live deployment and no backup key, so fresh ed25519 keys were generated —
their .sops.yaml anchors were updated to match.
All secrets are admin-only encrypted (matching clan_generate_ssh_key
convention). Age fingerprints verified against .sops.yaml anchors.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01B2EJ4qTsM5KUqhS5c3GAwx
The previous Phase 4 commit had sed-mangled fingerprints for these two
targets (old and new fingerprints concatenated into one line). The correct
new fingerprints are:
- proxmox-minimal: age19m0m7vdfg... (freshly generated, no prior key on pve1)
- lxc-gui: age1rrxqea6q6... (freshly generated, no prior key on pve1)
Re-run sops updatekeys on common.yaml and gui.yaml to match.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01B2EJ4qTsM5KUqhS5c3GAwx
Remove four stale age key anchors from .sops.yaml that correspond to
non-lxc build-type variants that were never deployed (or are now
superseded by their lxc-* counterparts):
&docker → superseded by &lxc-docker (active running host)
&server → superseded by &lxc-server (active running host)
&nix-cache → superseded by &lxc-nix-cache (active running host)
&nix-minimal → superseded by &lxc-minimal (active running host)
Also remove the secrets/docker.yaml creation_rules block entirely since
that file does not exist.
Re-encrypt secrets/common.yaml, secrets/nix-cache.yaml, and
secrets/server.yaml with sops updatekeys to drop the stale recipients.
The four removed keys can no longer decrypt these files.
Update README.md and CLAUDE.md to clarify that deployed lxc-* hosts
now use clan vars (vars/per-machine/<target>/openssh/) rather than the
gitignored host-keys/ directory.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01B2EJ4qTsM5KUqhS5c3GAwx
All actively deployed lxc-* hosts now have clan vars. Remove the legacy
scp -pr host-keys/ fallback in sync_remote_host_keys(): instead of
silently copying the gitignored directory, error clearly if no clan var
exists for the target and tell the operator how to generate one.
Also extend the uncommitted-changes check to cover vars/per-machine/ in
addition to .sops.yaml and secrets/, since clan vars must be committed
before the remote build git-pulls them.
Update the script header and sync_remote_host_keys comment to reflect
the new clan-only key flow.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01B2EJ4qTsM5KUqhS5c3GAwx
Encrypted private key matches the running container's key and the
vars.nixCacheHostKey in variables.nix (no rotation). Age fingerprint
age1ufg390... matches the &lxc-nix-cache anchor in .sops.yaml.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01B2EJ4qTsM5KUqhS5c3GAwx
nixos-lxc-sops-reinstall.service called switch-to-configuration test at
sysinit.target time (DefaultDependencies=false), before D-Bus was up.
D-Bus is required to restart systemd targets after activation scripts
run. The service reported failure on every boot (exit 1: "Failed to open
dbus connection") even though secrets were correctly installed, because
the D-Bus call happens after activation scripts complete.
Move the service to network.target so basic.target (which includes
dbus-broker.service) runs first. Also drop DefaultDependencies=false so
systemd auto-adds After=basic.target. Add SuccessExitStatus=11 to handle
the edge case where switch-to-configuration holds the lock during a
concurrent rebuild (exit 11 = "Could not acquire lock" -- the rebuild's
own activation already installed the secrets, so treating it as success
is correct).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01B2EJ4qTsM5KUqhS5c3GAwx
The key was generated in a prior session but not committed — the clan vars
files existed only in that session's working tree. Recovered the original
private key from pve1's host-keys/ backup (fingerprint age16kqf... matches
the &lxc-tor-relay anchor already in .sops.yaml), re-encrypted for admin
age key only, and stored in the canonical clan vars layout.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01B2EJ4qTsM5KUqhS5c3GAwx
Two bugs prevented nixos-rebuild switch from working on lxc-* hosts after
first boot, both confirmed live on a deployed lxc-tor-relay container:
1. Ordering bug: preserveSshHostKey had no explicit deps, so the topological
sort placed it at position 7 — after etc at position 5. By the time it
tried to save the SSH key, etc had already removed it as "obsolete"
(absent from the current generation's environment.etc when built without
NIXOS_HOST_KEYS_DIR). Consolidate all four system.activationScripts entries
into one block and add etc = { deps = ["preserveSshHostKey"]; } and
setupSecrets = { deps = ["restoreSshHostKey"]; } to enforce the correct
save→etc→restore→sops chain.
2. No boot-time secrets: /run/secrets is a tmpfs cleared on every reboot, and
sops-nix does NOT generate a boot-time service in this configuration
(confirmed live: no sops-nix.service in systemctl list-unit-files).
Add nixos-lxc-sops-reinstall.service, modelled after sops-nix's own service
placement (wantedBy/before sysinit.target, DefaultDependencies=false), so
secrets are reinstalled before basic.target on every non-first boot.
ConditionPathExists skips it on first boot; nixos-lxc-first-boot-activate
handles that case.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01B2EJ4qTsM5KUqhS5c3GAwx
Replaces the gitignored host-keys/ directory with clan vars as the
authoritative storage for SSH host keys. Keys are now generated as
sops-binary-encrypted clan var files (admin-key only) and checked into
vars/per-machine/<target>/openssh/, eliminating the plaintext private
key that previously had to live outside the repo.
Changes:
- modules/clan/ssh-host-key.nix: clan vars generator for the ed25519
SSH host key pair (neededFor="activation" — not mapped to sops.secrets,
delivered via tarball baking for LXC or --pre-format-files for VMs)
- flake.nix: add clanCore module + required settings to every mkTarget;
deduplicate bundled disko/sops-nix via follows; all 27 hosts eval clean
- flake.lock: updated to reflect the new follows constraints
- scripts/lib/clan-vars.sh: new helper library with
clan_ssh_key_exists / clan_ssh_pubkey_path / clan_decrypt_ssh_key /
clan_generate_ssh_key for use by the provisioning and sync scripts
- scripts/secrets/sync-host-keys.sh: queue_host_sync() now checks clan
vars first; generates via clan_generate_ssh_key if no key exists;
derives age fingerprint from clan pub key for .sops.yaml registration
- scripts/proxmox/create-proxmox-resource.sh: key management simplified
(sync-host-keys.sh now generates the key if missing, so the inline
prepare-host-key.sh call is gone); sync_remote_host_keys() decrypts
the clan key into a temp dir and scps just the two files to the node
when a clan key exists, falling back to the old host-keys/ scp for
any remaining legacy entries
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01B2EJ4qTsM5KUqhS5c3GAwx
Introduces clan-core pinned to its 26.05 release alongside the existing nixpkgs
26.05 input. No host configuration is changed — this is a pure dependency
addition so Phase 2 (per-host vars/secret management migration) has the input
available without a separate flake.lock bump.
clan-core.inputs.nixpkgs.follows = "nixpkgs" keeps a single nixpkgs closure.
sops-nix remains as a flake input; vars layers on top of it rather than
replacing it (clan's sops storage backend still needs sops-nix).
All hosts evaluate cleanly (codex-maintenance.sh --full-check equivalent
triggered by the flake.nix change).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Three ordering-related fixes to the Proxmox provisioning flow:
1. prepare-host-key.sh: make idempotent -- if the key already exists, print
a note and exit 0 instead of erroring. The caller (create-proxmox-resource.sh)
already guards standalone calls, but the script itself should be safe to
run directly on a host that was already keyed.
2. create-proxmox-resource.sh: after sync-host-keys.sh updates .sops.yaml /
secrets/, detect uncommitted changes and block with a prompt until the
operator confirms they've committed and pushed. The PVE node's git pull
only picks up committed+pushed state; without this gate, a new host's sops
recipient is missing from the secrets files the image build uses, so the
host can't decrypt secrets on first boot.
3. create-proxmox-resource.sh: add an explicit existence check for the host
key in both the LXC and VM remote build heredocs, before it's passed as
--pre-format-files / NIXOS_HOST_KEYS_DIR input. Gives a clear error
pointing at sync-host-keys.sh instead of a raw `cp: cannot stat` from
disko deep in the build.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The disko images script does `cd "$TMPDIR"` before parsing its arguments,
so relative paths passed to --pre-format-files resolve against the temp
dir instead of the repo root. Use $(pwd) to capture the absolute repo
path before the disko script changes directory.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Complete the rename so all identifiers match networking.hostName:
- flake.nix: attribute names and buildType strings
(linode/proxmox/lxc-tailscale-subnet-router → *-tailscale-router)
- modules/build-types/tailscale-subnet-router.nix → tailscale-router.nix
- .sops.yaml: anchor and alias names (age keys unchanged, no re-encrypt needed)
- host-keys/: local gitignored key files renamed (not committed)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
If host-keys/<target>_ssh_host_ed25519_key doesn't exist, run
prepare-host-key.sh to generate it before sync-host-keys.sh runs.
Prevents sync-host-keys.sh from hitting its SKIP/exit-1 path (anchor
in .sops.yaml but no local key) and the downstream disko build failure
when --pre-format-files can't find the key file.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
beatzaplenty
