Documentation fixes:
- README/AGENTS: rename tailscale-exit-node → tailscale-router, add ha-server
build type and proxmox-ha-server-{1,2} host table rows, add baremetal to
platform list, remove references to non-existent flake-target-refactor-spec.md
and remove-sensetive-info-refactor.md
- docs/auto-installer.md: fix lxc-tailscale-exit-node → lxc-tailscale-router,
add pxe-minimal to the flake outputs list
- variables.nix: fix domainControllerIp comment — IPA is the authoritative DNS
at .253 (Pi-hole is gone), not a forwarding intermediary
Code deduplication:
- Extract duplicate SSH host-key preservation activation scripts from
modules/platforms/lxc.nix and modules/platforms/proxmox.nix into a shared
modules/common/preserve-ssh-host-key.nix; both platforms now import it
- Replace 8-line hand-enumerated NFS export lists in server.nix and ha-server.nix
with a mkNfsExports helper that generates exports from vars.nfsShares — adding
a share to variables.nix now propagates to both exporters automatically
Dead code removal:
- modules/common/configuration.nix: remove leftover NixOS skeleton comments
(hardware-configuration import, grub lines) that were never used
- modules/docker/enable-service.nix: remove commented-out listenOptions and
daemon.settings blocks
- hosts/server/host.nix, hosts/nix-cache/host.nix: remove #DOCKER_HOST comments
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Grants the domain wayne account docker socket access on docker.sweet.home
without needing sudo, alongside the existing nixos local user membership.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
SSSD's dyndns_iface defaults to "*" which registers every interface's IP in
IPA DNS, including all Docker bridge networks (172.x.x.x). This caused
docker.sweet.home to resolve to Docker bridge IPs instead of 192.168.2.225.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
On first enrollment /home/wayne doesn't exist until the IPA user's first
login (pam_mkhomedir creates it). home-manager-<user>.service cd's into
the home dir immediately and fails with ENOENT, causing the whole rebuild
activation to return exit code 4.
Add ConditionPathExists so systemd skips the service (condition not met,
no failure) instead. After first login the dir exists and subsequent
rebuilds activate Home Manager normally.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Passing a FQDN like "nixos.sweet.home" instead of the short hostname
"nixos" caused the script to create a double-FQDN IPA host account
(nixos.sweet.home.sweet.home). Add an early check that rejects any
TARGET containing a dot.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
HM's useUserPackages creates a users.users stub for every configured HM
user, which lands wayne in /etc/passwd. NixOS adds pam_sss.so with the
"localusers" flag to the sudo PAM stack when SSSD is enabled; that flag
causes pam_sss to skip SSSD for any user found in local /etc/passwd,
falling through to pam_unix which has no shadow password for the stub.
Result: sudo auth always fails for the IPA user despite being in wheel.
Use NOPASSWD for the IPA user in sudoers instead. The IPA user already
authenticated to reach a shell (SSH key from IPA or Kerberos), so
re-prompting via a broken PAM path is security theater on a homelab.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
initgroups() uses NSS (groups: files sss) to build the supplemental
group list at login. Adding wheel to the local users.users stub means
the IPA user gets wheel membership from /etc/group, satisfying sudo's
group check.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Any enrolled host now automatically gets a Home Manager profile for the
IPA primary user (vars.ipaUser = "wayne"), covering what IPA doesn't:
dotfiles, user-scoped packages (tmux, sshfs), and EDITOR variable.
The home directory is pre-created by systemd-tmpfiles so HM activation
succeeds on steady-state systems before first login; pam_mkhomedir remains
as a fallback for fresh deploys where SSSD hasn't cached the user yet.
A minimal users.users stub satisfies NixOS's assertion requirements
(isNormalUser + group) that arise because home-manager.useUserPackages
creates a users.users entry to install packages to /etc/profiles/per-user/.
The stub is shadowed by SSSD at runtime (security.ipa sets passwd: sss files).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
IPA users (e.g. wayne@) don't get Home Manager so the aliases defined in
aliases.nix were invisible to them. Move Switch-nix, Test-nix, and
buildImage into programs.bash in configuration.nix so every user on every
host gets them via /etc/bashrc. Stub out aliases.nix for future per-user
HM-only additions.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The NixOS IPA module adds ConditionPathExists=/etc/krb5.keytab drop-ins
for auth-rpcgss-module.service and rpc-gssd.service via systemd.units.
In LXC containers with keytabs those conditions pass, the services start,
and then fail because auth_rpcgss can't be loaded and rpc_pipefs doesn't
exist in the container namespace.
Use lib.mkForce on our systemd.units text to win the conflict with NixOS's
existing definitions, and include ConditionVirtualization=!container
alongside the ConditionPathExists conditions so the services are skipped
(inactive, not failed) in containers that have a keytab.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
modules/ipa/client.nix is now a self-contained NixOS module (no longer a
parameterized function): it checks builtins.pathExists for
secrets/<hostname>.keytab at eval time and enables itself automatically if
found, making it a no-op for hosts without a keytab.
modules/common/configuration.nix imports it so every host in the flake is
a candidate for IPA enrollment — no per-host wiring needed. Adding a
keytab (via scripts/ipa/create-nixos-ipa-host-account.sh) is now the
only step required to enroll a host.
The module also sets networking.domain and networking.nameservers via
mkDefault when active, so new hosts don't need those set explicitly.
Also:
- Remove explicit IPA imports from hosts/nix-cache and hosts/tailscale-router
- Add secrets/pxe-boot.keytab + creation rule; remove incorrect
secrets/nixos.sweet.home.keytab and its creation rule
- Add .sops.yaml creation rules for all remaining host keytabs
(server, docker, tor-relay, nix-minimal, nixos) so the creation script
can target them without manual .sops.yaml edits
- Fix duplicate tailscale-router.keytab rule and corrupted gui.yaml comment
block in .sops.yaml
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Script fixes:
- Rename HOSTNAME variable to TARGET (shadowed the bash builtin)
- Fix ipa-getkeytab -s to always use IPA_SERVER, not DC_HOST (diverge if
--dc is overridden to a jump host)
- Remove dead REALM variable
- Add EXIT trap to delete the plaintext keytab if the script aborts before
sops encryption completes; cleared after successful encrypt
- Distinguish real ipa host-add failures from "already exists" instead of
swallowing all errors with || true
- Warn explicitly when no platform age keys exist for the target (keytab
would be admin-only and the host couldn't decrypt it at boot)
- Fix sops fallback from pinned nixos-25.11 channel to nixpkgs (uses the
repo's own flake.lock)
- Expand "next steps" output to include networking.domain and nameservers
lines that host.nix requires for IPA membership
Module docs:
- Point to the script as the primary setup path; move manual steps to a
fallback section
- Note that certs/ipa-ca.crt is already committed (no need to re-fetch)
- Document the networking.domain and nameservers requirements in the header
- Add sync-host-keys.sh as explicit step 0
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
OpenSSH 10.0 tightened AuthorizedKeysCommand security by checking every
path component of the command binary for group/world-write permission.
/nix/store is 1775 (group-writable by nixbld), so sshd silently skips
the command for any binary in the Nix store — causing IPA pubkey auth to
silently fail with no diagnostic.
Fix: copy sss_ssh_authorizedkeys to /usr/local/bin via systemd tmpfiles
(C+ copies the file rather than symlinking, so the path at runtime is
root-owned/755 throughout), and point AuthorizedKeysCommand at the copy.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Imports docker/enable-service.nix and pins virtualisation.docker to
docker_29 via a nixpkgs overlay. Fixes indentation on `imports` block
and `programs.direnv.enable` line so nixpkgs-fmt passes.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- security.pam.services.sshd.makeHomeDir: IPA users have no pre-created
home directory on the host; without this, sshd opens a session to a
missing directory and resets the connection immediately after auth
- AuthorizedKeysCommand was already added in previous commit
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- modules/ipa/client.nix: add AuthorizedKeysCommand so sshd fetches SSH
public keys from IPA via sss_ssh_authorizedkeys, enabling pubkey login
without per-host authorized_keys files
- hosts/tailscale-router/host.nix: add IPA client module + networking.domain
so SSSD runs and wayne can authenticate on this host
- secrets/tailscale-router.keytab: sops-encrypted keytab for
tailscale-router.sweet.home (generated by create-nixos-ipa-host-account.sh)
- .sops.yaml: creation rule for secrets/tailscale-router.keytab
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
NixOS's dnsmasq module defaults resolveLocalQueries to true, which adds
127.0.0.1 to networking.nameservers and binds dnsmasq to listen-address=127.0.0.1.
This made the host route all its own DNS through dnsmasq, which had
no-resolv=true and no upstream for anything outside the tailnet domain —
so every non-tailscale DNS query from the host itself (including SSSD
resolving the IPA server FQDN after the IPA client module was added) failed.
Setting resolveLocalQueries=false limits dnsmasq to its intended role: a
forwarding proxy reachable on the LAN interface for IPA's conditional
forwarder. The host uses domainControllerIp directly (already set in
networking.nameservers in host.nix).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
ipa-getkeytab runs as root via sudo so the temp file is root-owned;
scp as wayne gets Permission denied. Pipe through `sudo cat` over SSH
instead, which reads as root but writes locally as the invoking user.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Single command to enroll a NixOS host in FreeIPA and produce a
sops-encrypted keytab at secrets/<hostname>.keytab:
- Adds the .sops.yaml creation rule automatically (with all registered
platform-variant age keys as recipients)
- SSHes to the domain controller to run ipa host-add + ipa-getkeytab
- Refreshes the admin Kerberos ticket via `ssh -t ... kinit admin` if
missing or expired, so no manual kinit step is needed
- SCPs the keytab and encrypts it in-place with sops (file must be at
secrets/<hostname>.keytab before encryption so the path-based creation
rule matches — the common failure point when doing this manually)
Also adds HOME_DOMAIN and IPA_SERVER to scripts/env.sh, matching
variables.nix's homeDomain/ipaServer (same manual-sync pattern as
NIX_CACHE_HOST/LAN_DOMAIN).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
sops matches creation rules against the input file path, so encrypting
/tmp/<host>.keytab directly with stdout redirect fails to find the rule.
Copy to secrets/ first, then use -i to encrypt in-place.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
ipa-getkeytab confirmed ipa.sweet.home doesn't respond to LDAP;
domain-controller.sweet.home is the actual IPA server FQDN.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds modules/ipa/client.nix — a parameterized module that joins a NixOS host
to the sweet.home FreeIPA domain without ipa-client-install. It configures
security.ipa (SSSD, Kerberos, PAM, NSSwitch) and places a pre-provisioned host
keytab via sops-nix binary secret so enrollment is fully reproducible from the
flake.
- variables.nix: adds ipaServer (FQDN of the FreeIPA KDC; security.ipa.server
requires a hostname, not an IP, for Kerberos/TLS)
- certs/ipa-ca.crt: placeholder for the IPA CA public certificate (operator
replaces with: curl http://<ipa-server>/ipa/config/ca.crt)
- secrets/nix-cache.keytab: placeholder binary sops file (operator replaces
with the encrypted keytab after ipa host-add + ipa-getkeytab)
- .sops.yaml: adds creation rule for secrets/nix-cache.keytab (same recipients
as secrets/nix-cache.yaml)
- hosts/nix-cache/host.nix: imports the IPA client module; adds
networking.domain so the host's FQDN resolves correctly
Module header documents the three operator steps needed per host before deploy.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
zpool create -f was called if `zpool import -d /dev/disk/by-id` failed,
which could happen due to a race with systemd-udev-settle. The disk
would then be visible by the time zpool create ran, silently destroying
all data on an otherwise-intact pool.
Fix: locate the data disk first, retry the import directly against it
as a fallback, then check zdb -l for existing ZFS label metadata before
concluding the disk is blank. Remove -f so zpool create refuses rather
than overwrites if a pool is present.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01ULXzafSDwGhmFGnn3LtDSQ
IPA refuses to create a forward zone for ts.net because it's a real
public TLD with DNSimple nameservers. The forward zone must use the
tailnet-specific subdomain (vars.tailnetDomain, e.g. tail13f623.ts.net)
instead. Update dnsmasq server selector and comments to match.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01ULXzafSDwGhmFGnn3LtDSQ
FreeIPA (the new authoritative DNS) cannot reach 100.100.100.100
(Tailscale's internal MagicDNS resolver) directly because the DC is not
a Tailscale node. The tailscale-router IS a Tailscale node and can
reach 100.100.100.100 via tailscale0, so it now runs a dnsmasq
instance on its LAN interface that forwards all ts.net queries to
Tailscale's resolver.
After deploying this host, configure FreeIPA with:
kinit admin
ipa dnsforwardzone-add ts.net \
--forwarder=192.168.2.222 \
--forward-policy=only
This replaces Pi-hole's conditional forwarder for ts.net and restores
resolution of Tailscale MagicDNS names (e.g. raspberrypi.tail13f623.ts.net)
for all LAN hosts using FreeIPA as their DNS server.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01ULXzafSDwGhmFGnn3LtDSQ
Adds static IP configuration to every NixOS host in the flake that
has a fixed LAN address, and centralises all network primitives
(IPs, gateway, prefix length, interface names) in variables.nix so
there is one place to update if any of them change.
variables.nix additions:
- lanGateway / lanPrefixLength — LAN gateway and /24 prefix, replacing
every hardcoded 192.168.2.254 / 24 across host files
- lxcLanInterface / vmLanInterface / vmStorageInterface — NIC names for
LXC containers (eth0), Proxmox VMs (ens18), and the HA storage NIC
(ens19), used as attribute keys so changing the name is a one-line edit
- haStoragePrefixLength — /29 for the storage subnet, mirrors haStorageCidr
- Per-host IP variables: nixCacheIp (.224), tailscaleRouterIp (.222),
torRelayIp (.221), serverIp (.226), dockerIp (.225)
host.nix changes:
- tailscale-router, tor-relay, nix-cache, pxe-boot: useDHCP = false,
static address on eth0 (lxcLanInterface), struct-form defaultGateway
(required when using systemd-networkd which LXC containers use)
- server, docker: useDHCP = false, static address on ens18 (vmLanInterface),
struct-form defaultGateway (works for both scripted networking and networkd)
- ha-server-1, ha-server-2: replace hardcoded 192.168.2.254 / 24 / 29
with the new variables; no functional change for these hosts
modules/build-types/pxe-boot.nix:
- Domain-controller kickstart template: replace hardcoded 192.168.2.138
and 192.168.2.254 with vars.domainControllerIp / vars.lanGateway /
vars.lanPrefixLength / vars.homeDomain so the template stays correct
if the DC IP or domain is ever changed again
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01ULXzafSDwGhmFGnn3LtDSQ
vars.pxeServerIp was already set to the post-renumber target (.223) but the
pxe-boot CT is still at .247, so dnsmasq was advertising .223 as the TFTP server
and the VM couldn't reach it. Update to .247 so PXE boot works now; the comment
reminds us to flip it back to .223 when Stage 5 step 6 renumbers the CT.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
After the proxy DHCP handshake, the UEFI client queries the PXE boot
server on UDP port 4011 to get the actual boot filename. This port was
not open in the NixOS firewall, so all four PXE discovery attempts from
the test VM silently timed out. dnsmasq was bound to 0.0.0.0:4011 but
never received the packets.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
dnsmasq 2.93 does not send proxy DHCP offers from dhcp-boot alone in proxy
mode — pxe-service is required to trigger proxy offers for the initial boot.
Replace the dhcp-boot-based arch detection with pxe-service entries for
arch 0 (BIOS), 7 (EFI BC / OVMF), and 9 (EFI x86-64), then use dhcp-boot
only for the iPXE second-boot HTTP chain (tag:ipxe clients). Add log-dhcp
for post-deploy verification.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
dnsmasq binds port 53 by default even when only proxy DHCP is needed.
systemd-resolved already owns port 53 on the pxe-boot container, so
dnsmasq crashes at startup. Setting port=0 disables the DNS listener
entirely — pxe-boot only needs the proxy DHCP path for iPXE chainloading.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
dnsmasq config was placed inside systemd.services{} block, making Nix
interpret it as systemd.services.dnsmasq.settings (which doesn't exist).
Move to top-level services.dnsmasq and add UDP 67 to firewall for DHCP
proxy mode.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds proxmox-ha-server-1 and proxmox-ha-server-2 as real mkTarget entries
alongside the existing proxmox-server, backed by a new ha-server build type.
New modules
modules/ha/cluster-config.nix — DRBD resource + corosync nodelist sourced
from vars (haServer1Host/Ip, haServer2Host/Ip); resource-only fencing for
production STONITH; HA port firewall rules for DRBD, iSCSI, Corosync, pcsd
modules/build-types/ha-server.nix — imports pacemaker-stack + iscsi-target
+ cluster-config + beszel; NFS exports from vars.haStorageRoot (XFS-over-DRBD
mount); nfs-server.service.wantedBy force-cleared so Pacemaker controls
start/stop on the Active node only
New hosts
hosts/ha-server-{1,2}/host.nix — static IP from vars, unique hostId; sops
secrets (beszel, corosync authkey) are TODOs pending sync-host-keys.sh
variables.nix
haServer1/2Host, haServer1/2Ip, haServerVip, haStorageRoot, haIscsiIqn
ports.haServerDrbd/Iscsi/Corosync{1,2,Crypto}/PacemakerRemoted/Pcsd
scripts/ha/ (migrated + updated from test-lab/ha/)
cluster-init.sh — generates corosync authkey, initialises DRBD/XFS/iSCSI,
creates NFS dataset dirs, configures Pacemaker with DRBD + XFS + iSCSI
+ nfs-server + VIP; STONITH disabled initially (enable separately)
cluster-enable-stonith.sh — enables fence_pve_ssh STONITH after key deploy
fence-pve-ssh.py — Proxmox SSH fence agent (node names updated to ha-server-1/2)
acceptance-tests.sh — T1–T7 production acceptance tests
test-lab/ha/ removed — all Nix config moved to modules/ha/ and
modules/build-types/; scripts moved to scripts/ha/
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HaH1cSGvhogRP5ExoF6nD8
All 7 acceptance tests pass on live NixOS 25.11 VMs (VMIDs 200/201 on
pve1). Failover completes in ~5 s with data integrity verified.
modules/ha/pacemaker-stack.nix — fixes four NixOS-specific breakages:
- systemd StateDirectory resets /var/lib/pacemaker to root:root; removed
and replaced with ExecStartPre to create/chown dirs as hacluster
- HA_SBIN_DIR points to a non-existent Nix store path; overridden to
/run/current-system/sw/bin so crm_master resolves correctly
- OCF agents need an explicit broad PATH (iproute2, util-linux, xfsprogs,
drbd, bash, etc.) — NixOS services have no implicit PATH
- FUSER=true bypasses the psmisc fuser check_binary call in the
Filesystem OCF agent (psmisc not installed on minimal hosts)
modules/ha/iscsi-target.nix — LIO iSCSI target via targetctl with a
Python/rtslib_fb ExecStop that explicitly clears the kernel LIO state
(not just saves JSON), so the XFS backing store's file descriptor is
released before umount — preventing EBUSY stop timeouts on failover.
Includes an empty-config guard so the secondary node never overwrites
the primary's saveconfig.json with an empty one.
test-lab/ha/common.nix — updated to import both modules, use fencing
dont-care (no STONITH in test lab), omit LVM handlers (non-existent on
NixOS paths), and merge repeated services/networking attr sets to satisfy
statix W20. test-lab/ha/acceptance-tests.sh — final v4 with crm_standby
fix (pacemaker 3.x API).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HaH1cSGvhogRP5ExoF6nD8
Adds an unattended install option to the PXE boot menu that installs
Rocky Linux 9 and configures FreeIPA on the domain-controller.sweet.home
host without any operator interaction after selecting the menu entry.
How it works:
- fetch-rocky-pxeboot.service downloads the Rocky 9 Anaconda pxeboot
kernel and initrd from the Rocky mirror on first pxe-boot deploy
(idempotent, same pattern as fetch-debian-netboot)
- rocky-freeipa.ipxe boots Anaconda with inst.ks pointing at the
hosted Kickstart and net.ifnames=0 biosdevname=0 for stable eth0
- rocky-freeipa.ks (generated, includes vars.adminSshKey) performs:
- Minimal Rocky 9 install with ipa-server + ipa-server-dns
- Static IP 192.168.2.138 via NM connection file written in %post
- /etc/hosts fixed for FreeIPA FQDN requirement
- Random DM + admin passwords generated and saved to
/root/ipa-credentials.txt (chmod 600, never hardcoded)
- freeipa-first-boot.service oneshot enabled to run
ipa-server-install on the first real boot (~20 min)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015Jbvxx4xbHVcx1NkK3vtmK
Add nixos@nixos session key so the Claude Code session can SSH into
test VMs directly. Also enable services.qemuGuest.enable so
qm guest exec works as a fallback for key injection.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
SOPS_AGE_KEY_FILE was set in hosts/nixos/home.nix sessionVariables with a
literal ~ that Home Manager injects as-is into the environment. In bash,
tilde expansion does not happen inside double-quoted variable references, so
DEFAULT_SOPS_AGE_KEY_FILE resolved to ~/... literally and the -s file-existence
check in ensure_admin_decrypt_key silently failed. The script then generated
a brand-new age key (to ~/... relative to the repo root) while the real admin
key at ~/.config/sops/age/keys.txt went untouched -- making it appear the key
was lost when it was actually still intact.
Fix the home.nix root cause by using config.home.homeDirectory so the path
is fully resolved. Add tilde expansion in ensure_admin_decrypt_key as a
belt-and-suspenders guard for any caller whose environment has the same issue.
Also replace the auto-generate-a-new-key fallback with a hard failure: auto-
generating a new admin key is never useful (it cannot decrypt existing secrets)
and created serious confusion about whether the original key was lost.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace the hardcoded hostname check (docker, pxe-boot) with a check
on config.fileSystems: any lxc-* host whose NixOS config declares an
NFS fileSystem entry is automatically made privileged. The script
already reads proxmoxLXC.privileged dynamically via
flake_target_lxc_privileged, so no logic change is needed there —
only the comment is updated to describe the new derivation.
Result: lxc-docker and lxc-pxe-boot (the two with NFS mounts) evaluate
as privileged=true; lxc-nix-cache, lxc-minimal, lxc-server,
lxc-tailscale-router, lxc-tor-relay evaluate as privileged=false.
Any future lxc-* host that declares an NFS mount gets the correct
privilege level for free without a separate manual edit.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The kernel's NFS client (FS_USERNS_MOUNT not set) rejects NFS mounts
from inside any unprivileged container's user namespace with EPERM —
AppArmor's mount=nfs feature only whitelists the AppArmor layer; the
VFS-level rejection happens before AppArmor is consulted.
lxc-pxe-boot mounts server.sweet.home:/tank/pxe-boot/images at
/mnt/pxe-images so nginx can serve large ISOs without filling the
container's root disk. Same pattern as lxc-docker (already privileged
for the same reason since it also mounts several NFS shares).
Operator action required: VMID 103 must be recreated as a privileged
container (the UID mapping on disk differs between privileged and
unprivileged; changing it in-place with pct set is unsafe). Rebuild
the tarball and use create-proxmox-resource.sh to replace it.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Correct the NFS path from /tank/proxmox/pxe-images to /tank/pxe-boot/images
(matches variables.nix's proxmoxPxeImages.subpath)
- Clarify that LXC uses NFSv3+nolock while VM uses NFSv4.2+automount
- Add explicit note that lxc-pxe-boot needs features: nesting=1,mount=nfs and
why: nesting=1 is required by systemd 260+ for userns/credential isolation
(AppArmor denies userns_create without it), mount=nfs for NFSv3 access.
pct set replaces the whole features string — include both or the container
will fail to boot.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Filter non-attrset values from nfsShares in server.nix so the
poolDatasets loop skips the new `options` string entry
- Fix typo proxomoxLxcImages → proxmoxLxcImages in server.nix exports
- Rename proxmoxPxeImages → pxebootImages in mount-pxe-images.nix and
pxe-boot.nix to match the actual key in variables.nix
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
beatzaplentyandClaude Sonnet 4.6