# NixOS LAN Configurations

Flake-based NixOS configuration repository for Wayne's LAN servers and
workstation.

## Hosts

Targets are named `<platform>-<buildtype>`, generated from two orthogonal
pieces composed in `flake.nix`:

- **Platforms** (what it runs on): `linode`, `proxmox`, `lxc`, `baremetal`
- **Build types** (what it's for): `minimal`, `nix-cache`, `server`, `docker`,
  `gui`, `pxe-boot`, `tailscale-exit-node`, `tor-relay`

Not every combination exists — `pxe-boot` has no `linode` variant, since
PXE/DHCP/TFTP need LAN L2 adjacency that a Linode VPS doesn't have,
`tor-relay` currently only exists as `lxc-tor-relay`, and `baremetal`
currently only exists as `baremetal-gui` (the real gui-host hardware). The
full list:

| Target | Purpose |
| --- | --- |
| `linode-minimal` | Minimal NixOS host profile on a Linode VPS |
| `proxmox-minimal` | Minimal NixOS host profile on Proxmox — previously the flat `nix-minimal` target |
| `lxc-minimal` | Minimal NixOS host profile in a Proxmox LXC container |
| `linode-nix-cache` / `proxmox-nix-cache` / `lxc-nix-cache` | Local Nix binary cache and remote builder — previously the flat `nix-cache` target |
| `linode-server` / `proxmox-server` / `lxc-server` | Storage, NFS, backup, and monitoring exporter host — previously the flat `server` target |
| `linode-docker` / `proxmox-docker` / `lxc-docker` | Docker host for the main container stack — previously the flat `docker` target |
| `linode-gui` / `proxmox-gui` / `lxc-gui` | Cinnamon desktop workstation — previously the flat `nixos` target |
| `baremetal-gui` | Same Cinnamon desktop workstation, on the real gui-host hardware — ZFS RAID0 root, systemd-boot |
| `proxmox-pxe-boot` / `lxc-pxe-boot` | HTTP/iPXE boot asset host — previously the flat `pxe-boot` target |
| `linode-tailscale-exit-node` / `proxmox-tailscale-exit-node` / `lxc-tailscale-exit-node` | Tailscale exit node |
| `lxc-tor-relay` | Tor middle relay |

Which variant of a given buildtype is actually deployed isn't tracked
anywhere in this repo — that's live infrastructure state, not something a
committed file can keep accurate, and it changes independently of the code.
Check the Proxmox node itself, or `/etc/flake-target` on a running host (see
below), if you need to know what's really out there right now.
`scripts/proxmox/create-proxmox-resource.sh`'s duplicate-host guard works the same
way: it checks the Proxmox node directly rather than any file here.
Real, production deployments live on `pve1.sweet.home`; there's a second
node, `pve-test.sweet.home`, set aside purely for scratch/test resources —
see `scripts/env.sh` (`PVE1_HOST` / `PVE_TEST_HOST`, and the
`--node`/`PROXMOX_HOST` targeting they feed into) and CLAUDE.md's Proxmox
section for which is which.

Each buildtype's `hosts/<name>/host.nix` carries the per-machine identity
(hostname, hostId, per-machine secrets, `system.stateVersion`) that must stay
fixed regardless of which platform it's built for — see
`flake-target-refactor-spec.md` for the full rationale. Every deployed host
stamps its own active target name into `/etc/flake-target` at build time, so
`nixos-rebuild switch --flake .#$(cat /etc/flake-target)` always picks up the
right one even after a platform migration changes the flake attribute name.

List hosts with:

```bash
nix eval --json .#nixosConfigurations --apply builtins.attrNames | jq -r '.[]'
```

## Layout

| Path | Purpose |
| --- | --- |
| `flake.nix` | Flake inputs, the `mkTarget` platform × build-type generator, and `nixosConfigurations` outputs |
| `variables.nix` | Single source of truth for shared values (LAN domain/CIDR, hostnames, timezone, primary username, storage root, NFS share subpaths/mountpoints, service ports, ...) — passed to every module and Home Manager config as the `vars` argument via `specialArgs`/`extraSpecialArgs` |
| `hosts/<name>/host.nix` | Per-machine identity: hostname, hostId, per-machine secrets, `system.stateVersion` |
| `hosts/nixos/home.nix` | Workstation-specific Home Manager config (used by the `gui` build type) |
| `modules/platforms/` | Platform-specific config: virtualisation guest tools, boot method, hardware config (`linode.nix`, `proxmox.nix`, `lxc.nix`, `baremetal.nix`) |
| `modules/build-types/` | Build-type-specific config: what makes a system minimal/server/docker/gui/pxe-boot/nix-cache |
| `modules/common/` | Shared NixOS config, Home Manager, aliases imported by every host |
| `modules/nix-cache/` | Binary cache and remote builder client/server modules |
| `modules/installer/` | Auto-installer environment (ISO, also served as PXE netboot) — see `docs/auto-installer.md` |
| `host-keys/` | Gitignored; only used by the auto-installer environment for pre-seeding SSH host keys before first boot — see `docs/auto-installer.md`. All deployed hosts use clan vars (`vars/per-machine/<target>/openssh/`) instead |
| `vars/per-machine/` | Clan vars: committed, sops-encrypted SSH host keys for deployed LXC hosts; read by `create-proxmox-resource.sh` at deploy time |
| `docs/` | Operational notes for cache, builders, lock updates, boot services, the auto-installer, and Proxmox image builds |
| `scripts/` | Codex setup, validation, host-key, release-bump, and Proxmox resource helpers |

## Validation

Safe validation commands for Codex and local review:

```bash
bash scripts/codex-setup.sh
bash scripts/codex-maintenance.sh
```

`codex-maintenance.sh` with no flags (what CI runs on every push/PR) scopes
fmt-check/statix/eval to files changed against a base ref — fast, but only
as thorough as the diff. For the full sweep (every host, every package,
fmt-check and statix over the whole tree — slow, CI never runs this):

```bash
bash scripts/codex-maintenance.sh --full-check
bash scripts/codex-maintenance.sh --full-check --dry-run
```

For individual host evaluation:

```bash
nix eval .#nixosConfigurations.<host>.config.system.build.toplevel.drvPath --raw
```

Use `nix build --dry-run --no-link` when build planning is needed. Do not run
deployment, install, disk formatting, mount, or reboot commands from automated
review sessions.

## Operations

- Host rebuilds should consume the committed `flake.lock`.
- Routine dependency updates should happen through the flake lock automation
  described in `docs/flake-lock-automation.md`.
- `nix-cache` serves substitutes over HTTP and can act as a remote builder for
  client hosts.
- `pxe-boot` serves iPXE boot files over HTTP from `/srv/pxe`.

### Deploying a new host

Three different paths depending on target, none of them involving a manual
`nixos-rebuild switch` from this repo:

- Most hosts: boot the auto-installer, pick the target from its menu — see
  `docs/auto-installer.md`. Every menu target has a Disko config the
  installer formats unconditionally (`docs/auto-installer.md`'s "Storage"
  section covers how this stays non-destructive for `linode-*`, whose disks
  Linode itself provisions ahead of time).
- `lxc-*` targets: not installed at all — build a ready-to-run container
  tarball and `pct create` it as a CT template directly. `docs/auto-installer.md`
  covers why (and the installer's menu excludes them for the same reason).
- `proxmox-*` targets: can alternatively be built as a standalone `.raw`
  disk image and attached to a new VM with no install step — see
  `docs/proxmox-images.md`.

`scripts/proxmox/create-proxmox-resource.sh --type lxc|vm --host <name>` automates
either of the last two end to end (host-key registration, building the
image directly on the Proxmox node itself, `pct create`/`qm create`), with
`--dry-run` and a guard against duplicating an already-deployed host's
identity. See its `--help`.

## Security Notes

Do not commit tokens, private keys, live credentials, or new password hashes
as plaintext. Secrets are managed with [sops-nix](https://github.com/Mic92/sops-nix):
encrypted files live under `secrets/`, recipients (per-host age keys derived
from each host's existing SSH host key, plus an admin key) are declared in
`.sops.yaml`. To add or edit a secret:

```bash
nix-shell -p sops --run "sops secrets/<file>.yaml"
```

then reference it from a module via `config.sops.secrets."<name>".path`
(or `sops.templates` for values that need to be embedded in a rendered
config file, e.g. `nix.conf`'s `access-tokens`). Never write a secret value
directly into a tracked `.nix` file. A pre-commit hook (`.githooks/`,
enabled via `git config core.hooksPath .githooks`, done automatically by
`scripts/codex-setup.sh`) runs `gitleaks protect --staged` to catch mistakes
before they're committed.

The auto-installer environment is the one deliberate exception to
sops-nix-everywhere: it has a hardcoded login password instead (no stable
per-boot host key for sops-nix to derive from on ephemeral media) — see
"Host keys" in `docs/auto-installer.md` for why, and how the private keys it
*does* pre-seed for target hosts stay out of git via the gitignored
`host-keys/` directory. All deployed hosts use clan vars
(`vars/per-machine/<target>/openssh/`, committed and sops-encrypted) for
their SSH host keys.

This repository's git *history* still contains secrets committed before this
migration (see `remove-sensetive-info-refactor.md`) — those are being
scrubbed and rotated separately; don't treat the repo as safe to make public
until that's finished.