modules/build-types/tailscale-router.nix

@@ -1,4 +1,4 @@
-{ ... }:
+{ vars, ... }:
 
 {
   imports = [
@@ -12,8 +12,21 @@
   # own setting) so the intent is clear at the build-type level.
   services.tailscale.useRoutingFeatures = "server";
 
+  # Advertise the LAN subnet so Tailscale peers can route back to LAN machines.
+  # Must also be approved in the Tailscale admin console (Machines → Edit route settings).
+  services.tailscale.extraUpFlags = [ "--advertise-routes=${vars.lanCidr}" ];
+
   # Forwarded subnet-router traffic arrives on tailscale0 already
   # tailscale-authenticated -- the firewall's normal per-port allow-list
   # would otherwise drop it. Standard NixOS/Tailscale subnet-router guidance.
   networking.firewall.trustedInterfaces = [ "tailscale0" ];
+
+  # SNAT traffic from LAN machines going out through Tailscale so the remote
+  # peer sees it sourced from this router's Tailscale IP (100.x.x.x) rather
+  # than a raw LAN IP.  Without this, Tailscale drops the forwarded packets
+  # because the source is not a recognised Tailscale address.
+  networking.nat = {
+    enable = true;
+    externalInterface = "tailscale0";
+  };
 }