Fix nix_extra_opts falsely reporting nix-cache's SSH remote builder down

The reachability check used `cat < /dev/tcp/${NIX_CACHE_HOST}/22`, which
blocks forever reading for EOF that never comes -- sshd sends its banner
and then holds the connection open waiting for the client to speak next.
Every single check hit the 3s timeout and reported "unreachable"
unconditionally, regardless of whether the remote builder was actually up.
Confirmed live: a plain TCP connect (`exec 3<>/dev/tcp/...`, no read)
returns in ~60ms against a healthy nix-cache instead of always timing out.

Fixing that exposed a second, previously-dormant bug: `printf -v
NIX_EXTRA_OPTS '%q ' "${NIX_OPTS[@]}"` on a genuinely empty NIX_OPTS array
still runs one format pass and yields the literal `'' ` rather than an
empty string. A subprocess (e.g. sync-host-keys.sh) reusing this
process's decision via `eval "NIX_OPTS=(${NIX_EXTRA_OPTS})"` then rebuilt
a 1-element array holding an empty string instead of a 0-element array,
which broke `nix-shell "${NIX_OPTS[@]}" -p <pkg>` with a bogus positional
argument the moment NIX_OPTS was legitimately empty (nix-cache reachable)
-- something the first bug had made impossible to ever hit before.

Also adds a couple of retries (1s apart) to both checks as a secondary
safety net against genuine multi-second blips, on top of fixing the
checks themselves.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>

CLAUDE.md

@@ -133,9 +133,10 @@ nixosSystem {
 ```
 
 Platforms: `linode`, `proxmox`, `lxc`. Build types: `minimal`, `nix-cache`,
-`server`, `docker`, `gui`, `pxe-boot`. Not every combination is built — e.g.
-`pxe-boot` has no `linode` variant (PXE/DHCP/TFTP need LAN L2 adjacency a
-Linode VPS doesn't have). Treat `flake.nix`'s `generatedTargets` as the source
+`server`, `docker`, `gui`, `pxe-boot`, `tailscale-exit-node`. Not every
+combination is built — e.g. `pxe-boot` has no `linode` variant (PXE/DHCP/TFTP
+need LAN L2 adjacency a Linode VPS doesn't have). Treat `flake.nix`'s
+`generatedTargets` as the source
 of truth for which hosts exist — `README.md`, `AGENTS.md`,
 `docs/flake-lock-automation.md`, and the CI eval workflows
 (`.github/workflows/check-nixos.yml`, `.gitea/workflows/check-nixos.yml`) list

README.md

@@ -10,7 +10,7 @@ pieces composed in `flake.nix`:
 
 - **Platforms** (what it runs on): `linode`, `proxmox`, `lxc`
 - **Build types** (what it's for): `minimal`, `nix-cache`, `server`, `docker`,
-  `gui`, `pxe-boot`
+  `gui`, `pxe-boot`, `tailscale-exit-node`
 
 Not every combination exists — `pxe-boot` has no `linode` variant, since
 PXE/DHCP/TFTP need LAN L2 adjacency that a Linode VPS doesn't have. The full
@@ -26,6 +26,7 @@ list:
 | `linode-docker` / `proxmox-docker` / `lxc-docker` | Docker host for the main container stack (`proxmox-docker` is the real, deployed one — previously the flat `docker` target) |
 | `linode-gui` / `proxmox-gui` / `lxc-gui` | Cinnamon desktop workstation (`proxmox-gui` is the real, deployed one — previously the flat `nixos` target) |
 | `proxmox-pxe-boot` / `lxc-pxe-boot` | HTTP/iPXE boot asset host (`proxmox-pxe-boot` is the real, deployed one — previously the flat `pxe-boot` target) |
+| `linode-tailscale-exit-node` / `proxmox-tailscale-exit-node` / `lxc-tailscale-exit-node` | Tailscale exit node (no deployed target yet; `lxc-tailscale-exit-node` is the one planned for actual use) |
 
 The "(real, deployed)" targets above are also tracked machine-readably in
 `variables.nix`'s `deployedTargets` — keep both in sync when a deployment

docs/auto-installer.md

@@ -77,11 +77,33 @@ system profile) — there's no separate activation step to run yourself.
 of this (build, host-key handling, upload, `pct create` with the flags
 above) — see its `--help`.
 
-Host keys still need pre-seeding the same way as any other host (see "Host
-keys" below) — the sops-nix activation-vs-first-boot race is identical
-regardless of how the image reaches the machine. `NIXOS_HOST_KEYS_DIR=...
-nix build ... --impure` bakes the matching key into the tarball the same way
-it does for the ISO/PXE installer images.
+Host keys still need pre-seeding the same way as any other host — the
+sops-nix activation-vs-first-boot race is identical regardless of how the
+image reaches the machine. Unlike the ISO/PXE installer (where
+`modules/installer/host-keys.nix` bakes *every* `host-keys/` entry into
+`/etc/host-keys/` for `auto-install.sh` to pick from and copy at install
+time — see "Host keys" below), an `lxc-*` tarball has no install step to
+copy anything during, so `modules/platforms/lxc.nix` bakes this *one*
+target's key straight into `/etc/ssh/ssh_host_ed25519_key(.pub)` directly,
+keyed by its own exact flake target name (`config.environment.etc` can't
+be read back from within a module still contributing to it, so this comes
+in via `specialArgs.flakeTarget`, set by `flake.nix`'s `mkTarget`):
+
+```sh
+NIXOS_HOST_KEYS_DIR="$(pwd)/host-keys" \
+  nix build .#nixosConfigurations.lxc-nix-cache.config.system.build.tarball --impure
+```
+
+Confirmed the hard way: without this, the tarball's own built-in system
+just generates a fresh host key at first boot like any host would, which
+can never match whatever `.sops.yaml` actually trusts for that target —
+`sops-install-secrets` fails with `Error getting data key: 0 successful
+groups required, got 0`, and *every* secret (including this host's own
+login) permanently fails to decrypt, silently — no error in the boot log
+at all, since the activation step that would install secrets only runs on
+a from-scratch first activation and skips silently once `/run/current-system`
+already exists. `scripts/create-proxmox-resource.sh` always builds with
+`NIXOS_HOST_KEYS_DIR` set for this reason.
 
 ## Layout
 

flake.nix

@@ -33,6 +33,9 @@
       # nix-cache itself consumes the nix-cache substituter and remote
       # builder.
       mkTarget = { platform, buildType, hostPath, homeFile ? ./modules/common/home.nix }:
+        let
+          flakeTarget = "${platform}-${buildType}";
+        in
         nixpkgs.lib.nixosSystem {
           inherit system;
           modules = [
@@ -42,7 +45,7 @@
             ./modules/platforms/${platform}.nix
             ./modules/build-types/${buildType}.nix
             hostPath
-            { environment.etc."flake-target".text = "${platform}-${buildType}"; }
+            { environment.etc."flake-target".text = flakeTarget; }
             home-manager.nixosModules.home-manager
             {
               home-manager = {
@@ -56,7 +59,13 @@
             ./modules/nix-cache/client.nix
             ./modules/nix-cache/remote-builder-client.nix
           ];
-          specialArgs = { inherit inputs vars netbootSystem; };
+          # flakeTarget is passed via specialArgs (not read back from
+          # config.environment.etc."flake-target" above) specifically so
+          # modules/platforms/lxc.nix can use it to select its own host key
+          # file without a same-option circular dependency (a module
+          # contributing to environment.etc can't read the merged
+          # environment.etc it's itself contributing to).
+          specialArgs = { inherit inputs vars netbootSystem flakeTarget; };
         };
 
       # Generated platform x build-type matrix. pxe-boot has no linode
@@ -85,6 +94,10 @@
 
         proxmox-pxe-boot = mkTarget { platform = "proxmox"; buildType = "pxe-boot"; hostPath = ./hosts/pxe-boot/host.nix; };
         lxc-pxe-boot = mkTarget { platform = "lxc"; buildType = "pxe-boot"; hostPath = ./hosts/pxe-boot/host.nix; };
+
+        linode-tailscale-exit-node = mkTarget { platform = "linode"; buildType = "tailscale-exit-node"; hostPath = ./hosts/tailscale-exit-node/host.nix; };
+        proxmox-tailscale-exit-node = mkTarget { platform = "proxmox"; buildType = "tailscale-exit-node"; hostPath = ./hosts/tailscale-exit-node/host.nix; };
+        lxc-tailscale-exit-node = mkTarget { platform = "lxc"; buildType = "tailscale-exit-node"; hostPath = ./hosts/tailscale-exit-node/host.nix; };
       };
 
       # Auto-install environments (migrated from the former nix-auto-installer

hosts/tailscale-exit-node/host.nix

@@ -0,0 +1,12 @@
+_:
+
+{
+  networking.hostName = "exit-node";
+
+  # No networking.hostId: only ZFS-touching hosts (server, docker) need one
+  # for pool-import safety, and this host does neither.
+
+  # A genuinely new host (not a pre-refactor carry-over), so it tracks the
+  # flake's current nixpkgs release rather than being pinned to an older one.
+  system.stateVersion = "26.05";
+}

modules/beszel/enable-agent.nix

@@ -6,4 +6,13 @@
     #DOCKER_HOST = "tcp://docker-socket-proxy:2375";
     HUB_URL = "http://${vars.dockerHost}.${vars.homeDomain}:${toString vars.ports.beszelHub}";
   };
+
+  # The upstream module runs beszel-agent under DynamicUser with
+  # ProtectSystem = "strict" and no StateDirectory, so /var/lib/beszel-agent
+  # (where the agent persists its hub-pairing fingerprint, per
+  # https://github.com/henrygd/beszel/discussions/1542) isn't writable --
+  # every restart silently fails to save it and regenerates a fresh one in
+  # memory, permanently desyncing from whatever the hub has on record after
+  # the very first successful pairing. Give it real persistent storage.
+  systemd.services.beszel-agent.serviceConfig.StateDirectory = "beszel-agent";
 }

modules/build-types/tailscale-exit-node.nix

@@ -0,0 +1,21 @@
+{ ... }:
+
+{
+  imports = [
+    ../tailscale/exit-node.nix
+  ];
+
+  # "server", not "both": this build type only ever advertises itself as an
+  # exit node (see ../tailscale/exit-node.nix) -- it doesn't advertise LAN
+  # subnet routes, so it doesn't need the "client"-side loose reverse-path
+  # filtering that "both" would also turn on. Deliberately left unbundled
+  # from LAN-subnet-route advertisement so this build type stays valid on
+  # every platform, including linode (a remote VPS with no network path to
+  # the home LAN at all).
+  services.tailscale.useRoutingFeatures = "server";
+
+  # Forwarded exit-node traffic arrives on tailscale0 already
+  # tailscale-authenticated -- the firewall's normal per-port allow-list
+  # would otherwise drop it. Standard NixOS/Tailscale exit-node guidance.
+  networking.firewall.trustedInterfaces = [ "tailscale0" ];
+}

modules/platforms/lxc.nix

@@ -1,5 +1,44 @@
-{ lib, modulesPath, ... }:
+{ lib, modulesPath, flakeTarget, ... }:
 
+let
+  # Bakes this exact flake target's pre-generated SSH host key straight
+  # into /etc/ssh/ -- mirrors modules/installer/host-keys.nix's
+  # builtins.getEnv pattern (impure and empty under normal `nix
+  # build`/`nix eval`, so this is a no-op unless explicitly opted into
+  # with NIXOS_HOST_KEYS_DIR=... --impure), but places the key directly
+  # rather than staging it under /etc/host-keys/ for a later manual copy
+  # -- this is the whole system for a `lxc-*` host, built straight to a
+  # pct-restorable tarball with no install step, so there's no later copy
+  # step to stage for.
+  #
+  # Without this, config.system.build.tarball's built-in system just
+  # generates a fresh host key at first boot like any other host would --
+  # but sops-nix derives its decryption key from *this* file, and
+  # .sops.yaml only trusts whatever key scripts/sync-host-keys.sh already
+  # registered for this exact target name. A freshly-generated key can
+  # never match that, so every secret (including this host's own login)
+  # permanently fails to decrypt. Confirmed live: sops-install-secrets
+  # errored with "Error getting data key: 0 successful groups required,
+  # got 0" -- the container's actual host key's age fingerprint didn't
+  # match the one registered in .sops.yaml at all.
+  hostKeysDirStr = builtins.getEnv "NIXOS_HOST_KEYS_DIR";
+  hasHostKeysDir = hostKeysDirStr != "" && builtins.pathExists hostKeysDirStr;
+  hostKeysDir = /. + hostKeysDirStr;
+
+  # flakeTarget ("${platform}-${buildType}") comes in via specialArgs from
+  # flake.nix's mkTarget -- exactly the name scripts/sync-host-keys.sh
+  # registers keys under. Deliberately not read back from
+  # config.environment.etc."flake-target" (which is set to the same value)
+  # -- this module also *contributes* to environment.etc below, and a
+  # module reading the merged value of an option it's still defining is a
+  # circular dependency (confirmed: "infinite recursion encountered").
+  privKeyFile = hostKeysDir + "/${flakeTarget}_ssh_host_ed25519_key";
+  pubKeyFile = hostKeysDir + "/${flakeTarget}_ssh_host_ed25519_key.pub";
+  hasKeyForThisTarget =
+    hasHostKeysDir
+    && builtins.pathExists privKeyFile
+    && builtins.pathExists pubKeyFile;
+in
 {
   # LXC containers share the host kernel — Proxmox starts them by exec'ing
   # /sbin/init directly, no bootloader/initrd involved — and Proxmox has its
@@ -35,4 +74,75 @@
   # for the same reason; it just doesn't disable NetworkManager itself,
   # which modules/common/configuration.nix enables for every host.
   networking.networkmanager.enable = lib.mkForce false;
+
+  environment.etc = lib.mkIf hasKeyForThisTarget {
+    "ssh/ssh_host_ed25519_key" = {
+      source = privKeyFile;
+      mode = "0600";
+    };
+    "ssh/ssh_host_ed25519_key.pub" = {
+      source = pubKeyFile;
+      mode = "0644";
+    };
+  };
+
+  # virtualisation/proxmox-lxc.nix (imported above) registers the Nix
+  # store DB via a systemd service (register-nix-paths) -- it never runs
+  # an activation script at all. Confirmed live this means neither
+  # sops-nix's "for users" secrets (password hashes -- installed by the
+  # activation script itself, not a systemd service, since they need to
+  # exist *before* user creation) nor the user-creation step that
+  # consumes them ever run on a real lxc-* boot. Regular secrets
+  # (nix-serve's key, beszel's token, etc.) work anyway because sops-nix
+  # provides its own systemd service for those.
+  #
+  # A systemd service, not boot.postBootCommands: tried that first (it's
+  # a genuine, generally-invoked hook -- nixos/modules/system/boot/stage-2-init.sh,
+  # which becomes this container's actual /sbin/init, unconditionally
+  # runs it) but switch-to-configuration behaves differently that early in
+  # boot (raw stage-2-init.sh, before systemd itself has even started) --
+  # confirmed live it silently failed to rewrite /etc/shadow from there
+  # even in "test" mode, despite the exact same command working reliably
+  # every time when run post-boot (i.e. as a normal systemd service, which
+  # is what this is). Not fully root-caused why the early context
+  # specifically breaks it; a real systemd service sidesteps needing to.
+  #
+  # /etc/shadow already has PLACEHOLDER entries for every declared user
+  # baked in at build time (part of constructing the system closure).
+  # update-users-groups.pl deliberately never overwrites an *existing*
+  # shadow entry -- a correct safety property in general (don't clobber a
+  # real user's real password on a config rebuild) -- but on a genuine
+  # first boot that only means the real hashedPasswordFile-derived hash
+  # never gets the chance to be applied either, since the placeholder is
+  # already "seen". Safe to clear here specifically: there is no real
+  # password yet to protect on a first boot.
+  #
+  # "test" mode, not "boot": confirmed live "boot" mode aborts partway
+  # through (before rewriting /etc/shadow) on a warning that "/boot" is on
+  # a different filesystem -- a real check for a host with a bootloader to
+  # update, meaningless for a container that has none
+  # (boot.loader.{grub,systemd-boot}.enable are both false above), but it
+  # still aborts the script. "test" runs every activation step without
+  # touching boot-loader state at all.
+  #
+  # ConditionPathExists (systemd-native, not a bash-level check) means
+  # this only ever runs once, on the genuine first boot -- systemd itself
+  # skips even starting it on every later boot once the marker exists.
+  # switch-to-configuration is otherwise the operator's call per this
+  # repo's own safety rules, not something to run on every boot.
+  systemd.services.nixos-lxc-first-boot-activate = {
+    description = "Complete first-boot NixOS activation (users, secrets) for this LXC container";
+    wantedBy = [ "multi-user.target" ];
+    unitConfig.ConditionPathExists = "!/var/lib/nixos-lxc-first-boot-activated";
+    serviceConfig = {
+      Type = "oneshot";
+      RemainAfterExit = true;
+    };
+    script = ''
+      rm -f /etc/shadow
+      /run/current-system/bin/switch-to-configuration test
+      mkdir -p /var/lib
+      touch /var/lib/nixos-lxc-first-boot-activated
+    '';
+  };
 }

modules/tailscale/exit-node.nix

@@ -1,12 +1,19 @@
-{ vars, ... }:
+_:
 
 {
   services.tailscale = {
     enable = true;
 
-    extraUpFlags = [
+    # extraSetFlags (tailscale set, via the always-on tailscaled-set
+    # service), not extraUpFlags -- extraUpFlags is only ever applied by
+    # tailscaled-autoconnect, which itself only runs when
+    # services.tailscale.authKeyFile is set (nothing in this repo sets one,
+    # so tailscale up is a manual, one-time operator step on every host that
+    # uses this service). extraSetFlags has no such gate, so
+    # --advertise-exit-node self-reapplies on every boot once the operator
+    # has authenticated the node once.
+    extraSetFlags = [
       "--advertise-exit-node"
-      "--advertise-routes=${vars.lanCidr}"
     ];
   };
 }

scripts/create-proxmox-resource.sh

@@ -40,8 +40,12 @@ Create mode (default):
                         config.networking.hostName (server, docker,
                         nix-cache, nixos, pxe-boot, nix-minimal). Use
                         --list to see what's available for --type.
-  --name <name>          Proxmox display name/hostname (default: the flake
-                          target name, e.g. lxc-server)
+  --name <name>          Proxmox display name/hostname (default: --host's
+                          value, e.g. nix-cache -- for lxc this becomes the
+                          guest's real networking.hostName too, since
+                          proxmoxLXC.manageHostName pulls it from Proxmox's
+                          own container config, so it must match host.nix
+                          regardless of build type)
   --vmid <n>              Numeric VMID (default: next free, via
                           \`pvesh get /cluster/nextid\` on the node).
                           Refuses to run if this ID already exists.
@@ -274,7 +278,13 @@ if [[ -z "$flake_target" ]]; then
   exit 1
 fi
 
-[[ -z "$name" ]] && name="$flake_target"
+# The container/VM's real identity is --host (e.g. "nix-cache"), validated
+# above against config.networking.hostName -- not the flake target name
+# (e.g. "lxc-nix-cache"), which is build-type-specific and only exists to
+# pick which platform variant to build. Defaulting --name to the flake
+# target would make lxc's --hostname (which proxmoxLXC.manageHostName
+# feeds straight into the guest's real hostname) disagree with host.nix.
+[[ -z "$name" ]] && name="$host"
 
 # --- refuse to duplicate a host that's already really deployed ----------
 # Checked by hostName, not exact flake target: proxmox-server being
@@ -383,9 +393,19 @@ else
 fi
 
 if [[ "$image_already_remote" -eq 0 && -z "$local_image" ]]; then
+  # Mirrors the real build commands' "${NIX_OPTS[@]}" below -- nix_extra_opts
+  # (called earlier, once) has already decided whether nix-cache is in play,
+  # and the dry-run preview needs to reflect that decision instead of always
+  # printing the same command regardless of outcome.
+  nix_opts_display=""
+  if [[ ${#NIX_OPTS[@]} -gt 0 ]]; then
+    printf -v nix_opts_display '%q ' "${NIX_OPTS[@]}"
+    nix_opts_display=" ${nix_opts_display% }"
+  fi
   if [[ "$type" == "lxc" ]]; then
     if [[ "$dry_run" -eq 1 ]]; then
       echo "[dry-run] would build: NIXOS_HOST_KEYS_DIR=${repo_root}/host-keys nix build --impure \\"
+      echo "[dry-run]   --no-use-registries --no-accept-flake-config${nix_opts_display} \\"
       echo "[dry-run]   .#nixosConfigurations.${flake_target}.config.system.build.tarball"
       local_image="<built-tarball>"
     else
@@ -399,7 +419,8 @@ if [[ "$image_already_remote" -eq 0 && -z "$local_image" ]]; then
     fi
   else
     if [[ "$dry_run" -eq 1 ]]; then
-      echo "[dry-run] would build: nix build .#nixosConfigurations.${flake_target}.config.system.build.diskoImagesScript"
+      echo "[dry-run] would build: nix build --no-use-registries --no-accept-flake-config${nix_opts_display} \\"
+      echo "[dry-run]   .#nixosConfigurations.${flake_target}.config.system.build.diskoImagesScript"
       echo "[dry-run] would run:   sudo ./result-${flake_target} \\"
       echo "[dry-run]                --pre-format-files host-keys/${flake_target}_ssh_host_ed25519_key /etc/ssh/ssh_host_ed25519_key \\"
       echo "[dry-run]                --pre-format-files host-keys/${flake_target}_ssh_host_ed25519_key.pub /etc/ssh/ssh_host_ed25519_key.pub \\"

scripts/env.sh

@@ -88,13 +88,60 @@ nix_extra_opts() {
   fi
   export NIX_EXTRA_OPTS_DECIDED=1
   NIX_OPTS=()
-  if ! curl --silent --fail --max-time 3 "http://${NIX_CACHE_HOST}/nix-cache-info" >/dev/null 2>&1; then
+
+  # Retry a couple of times, 1s apart, before believing either check --
+  # belt-and-suspenders against a genuine multi-second blip (nix-cache
+  # restarting), on top of the fix below. Worst case (~11s total, host
+  # genuinely gone) is still nowhere near the 15s+ *per lookup* nix's own
+  # substituter retries would cost if this check didn't exist at all.
+  local attempt cache_up=0 builder_up=0
+  for attempt in 1 2 3; do
+    if curl --silent --fail --max-time 3 "http://${NIX_CACHE_HOST}/nix-cache-info" >/dev/null 2>&1; then
+      cache_up=1
+      break
+    fi
+    [[ "$attempt" -lt 3 ]] && sleep 1
+  done
+
+  if [[ "$cache_up" -eq 0 ]]; then
     echo "nix-cache (http://${NIX_CACHE_HOST}) is unreachable -- skipping it (substituter + remote builder) for the rest of this run." >&2
     NIX_OPTS=(--option substituters "https://cache.nixos.org/" --builders "")
-  elif ! timeout 3 bash -c "cat < /dev/tcp/${NIX_CACHE_HOST}/22" >/dev/null 2>&1; then
+  else
+    for attempt in 1 2 3; do
+      # `exec 3<>/dev/tcp/...` just opens the fd and returns -- it does NOT
+      # read from it. Confirmed live this is load-bearing, not stylistic:
+      # the previous `cat < /dev/tcp/.../22` blocked forever and always hit
+      # the timeout even against a perfectly healthy nix-cache, because
+      # sshd sends its banner and then holds the connection open waiting
+      # for the client to speak next -- `cat` never sees EOF, so this
+      # check reported "unreachable" unconditionally, 100% of the time,
+      # regardless of whether the remote builder was actually up.
+      if timeout 3 bash -c "exec 3<>/dev/tcp/${NIX_CACHE_HOST}/22" 2>/dev/null; then
+        builder_up=1
+        break
+      fi
+      [[ "$attempt" -lt 3 ]] && sleep 1
+    done
+    if [[ "$builder_up" -eq 0 ]]; then
       echo "nix-cache's SSH remote builder (nixremote@${NIX_CACHE_HOST}:22) is unreachable -- disabling remote builds for the rest of this run." >&2
       NIX_OPTS=(--builders "")
     fi
+  fi
+
+  # `printf '%q '` with a genuinely empty NIX_OPTS still runs one format
+  # pass over a missing argument and yields the literal `'' ` rather than
+  # an empty string (confirmed live) -- a subprocess that later does
+  # `eval "NIX_OPTS=(${NIX_EXTRA_OPTS})"` (the branch above, for e.g.
+  # sync-host-keys.sh reusing this process's decision) would then rebuild
+  # a 1-element array holding an empty string instead of a 0-element
+  # array, and `nix-shell "${NIX_OPTS[@]}" -p <pkg>` chokes on that stray
+  # element as a bogus positional argument. Guard the empty case
+  # explicitly so nix-cache being reachable (NIX_OPTS legitimately empty)
+  # round-trips as truly empty instead.
+  if [[ ${#NIX_OPTS[@]} -gt 0 ]]; then
     printf -v NIX_EXTRA_OPTS '%q ' "${NIX_OPTS[@]}"
+  else
+    NIX_EXTRA_OPTS=""
+  fi
   export NIX_EXTRA_OPTS
 }