Compare commits

...
Author SHA1 Message Date
beatzaplentyandClaude Sonnet 4.6 720399b00d fix(docker): declaratively apply groupmod --non-unique for IPA GID conflict
Check NixOS configurations / eval-hosts (pull_request) Successful in 10m33s
NixOS's group activation uses plain groupmod, which silently skips the
GID change when SSSD exposes the same GID (50010) via the IPA
docker-access group through NSS.  Add an activation script that runs
after the normal 'groups' step and applies groupmod --non-unique so the
local docker group can share GID 50010 with the SSSD-provided IPA group.
If the GID actually changes on a live system the script also restarts
docker.socket + docker.service so the socket is recreated with the new
GID.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 18:17:43 +10:00
beatzaplentyandClaude Sonnet 4.6 fc8f7baf3e fix(ipa): restore IPA password login via LightDM and su
Check NixOS configurations / eval-hosts (pull_request) Successful in 10m33s
Two independent fixes:

1. hashedPassword = "!" on the IPA user stub
   Without any shadow entry, pam_unix returns PAM_AUTHINFO_UNAVAIL
   before prompting, so PAM_AUTHTOK is never set. The "!" marker
   (account locked, not a real hash) ensures a shadow entry exists so
   pam_unix prompts and sets PAM_AUTHTOK — which the subsequent
   pam_sss module can then use.

2. pam_sss try_first_pass instead of use_first_pass (login + su)
   use_first_pass silently fails when PAM_AUTHTOK is unset.
   try_first_pass prompts independently in that case, making IPA
   password auth work even if pam_unix returns early for any reason.

Root cause found during incident: wayne (uid 50002) was outside IPA's
auto-SID range (163800000+), so sidgen never assigned him an
ipaNTSecurityIdentifier. Without it, ipadb's handle_authdata step fails
with "Generic error" after SPAKE pre-auth succeeds. Fixed by manually
adding objectClass: ipaNTUserAttrs + ipaNTSecurityIdentifier RID 550002
to wayne's LDAP entry on domain-controller. Any future IPA user with a
manually-assigned uid outside the auto-range needs the same treatment.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 17:25:37 +10:00
beatzaplenty a960c662f0 Merge pull request 'feat(ipa/docker): grant docker access via IPA group membership' (#90) from worktree-docker-ipa-group into main
Check NixOS configurations / eval-hosts (push) Successful in 10m33s
Reviewed-on: #90
2026-07-28 05:48:45 +00:00
beatzaplenty 6f602b2245 Merge pull request 'chore: full sweep — docs sync, SSH key module extraction, NFS dedup, dead code removal' (#89) from worktree-full-sweep into main
Check NixOS configurations / eval-hosts (push) Successful in 10m39s
Reviewed-on: #89
2026-07-28 05:26:57 +00:00
beatzaplentyandClaude Sonnet 4.6 e62e9c9a6a chore: full sweep — docs sync, SSH key module extraction, NFS dedup, dead code removal
Check NixOS configurations / eval-hosts (pull_request) Successful in 10m40s
Documentation fixes:
- README/AGENTS: rename tailscale-exit-node → tailscale-router, add ha-server
  build type and proxmox-ha-server-{1,2} host table rows, add baremetal to
  platform list, remove references to non-existent flake-target-refactor-spec.md
  and remove-sensetive-info-refactor.md
- docs/auto-installer.md: fix lxc-tailscale-exit-node → lxc-tailscale-router,
  add pxe-minimal to the flake outputs list
- variables.nix: fix domainControllerIp comment — IPA is the authoritative DNS
  at .253 (Pi-hole is gone), not a forwarding intermediary

Code deduplication:
- Extract duplicate SSH host-key preservation activation scripts from
  modules/platforms/lxc.nix and modules/platforms/proxmox.nix into a shared
  modules/common/preserve-ssh-host-key.nix; both platforms now import it
- Replace 8-line hand-enumerated NFS export lists in server.nix and ha-server.nix
  with a mkNfsExports helper that generates exports from vars.nfsShares — adding
  a share to variables.nix now propagates to both exporters automatically

Dead code removal:
- modules/common/configuration.nix: remove leftover NixOS skeleton comments
  (hardware-configuration import, grub lines) that were never used
- modules/docker/enable-service.nix: remove commented-out listenOptions and
  daemon.settings blocks
- hosts/server/host.nix, hosts/nix-cache/host.nix: remove #DOCKER_HOST comments

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 15:18:06 +10:00
beatzaplentyandClaude Sonnet 4.6 5beed2d75c feat(ipa/docker): grant docker access via IPA group membership
Check NixOS configurations / eval-hosts (pull_request) Successful in 10m39s
Create an IPA group "docker-access" (GID 50010) and pin the local
"docker" group to that GID on all Docker hosts.  Any IPA user in the
docker-access group automatically gains docker socket access through
SSSD supplementary-group resolution — no per-host docker.members
entry needed.

Specific changes:
- variables.nix: add dockerAccessGid = 50010
- modules/docker/enable-service.nix: lib.mkForce docker GID to
  dockerAccessGid, removing the need to name individual IPA users
- modules/build-types/docker.nix: remove direct wayne docker.members
  entry (access now comes from IPA group)
- modules/ipa/client.nix: refactor repeated security.* / systemd.*
  top-level keys into merged attribute sets (fixes statix W20); add
  security.pam.services.lightdm.makeHomeDir so the GUI login path
  also creates the home dir on first login

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 15:16:05 +10:00
beatzaplentyandClaude Sonnet 4.6 fe7fc55c04 feat(docker): add IPA wayne user to docker group
Check NixOS configurations / eval-hosts (push) Failing after 12m13s
Grants the domain wayne account docker socket access on docker.sweet.home
without needing sudo, alongside the existing nixos local user membership.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 14:07:34 +10:00
beatzaplentyandClaude Sonnet 4.6 6cdae391f4 fix(docker): pin IPA dyndns to eth0 to prevent Docker bridge IP registration
SSSD's dyndns_iface defaults to "*" which registers every interface's IP in
IPA DNS, including all Docker bridge networks (172.x.x.x). This caused
docker.sweet.home to resolve to Docker bridge IPs instead of 192.168.2.225.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 14:07:34 +10:00
beatzaplenty 95eb494370 Merge pull request 'Worktree ipa lxc kerberos fix' (#88) from worktree-ipa-lxc-kerberos-fix into main
Check NixOS configurations / eval-hosts (push) Failing after 9m47s
Reviewed-on: #88
2026-07-28 03:39:23 +00:00
beatzaplentyandClaude Sonnet 4.6 9294d2fd25 fix(ipa): skip home-manager-wayne service when home dir absent
Check NixOS configurations / eval-hosts (pull_request) Failing after 9m42s
On first enrollment /home/wayne doesn't exist until the IPA user's first
login (pam_mkhomedir creates it). home-manager-<user>.service cd's into
the home dir immediately and fails with ENOENT, causing the whole rebuild
activation to return exit code 4.

Add ConditionPathExists so systemd skips the service (condition not met,
no failure) instead. After first login the dir exists and subsequent
rebuilds activate Home Manager normally.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 13:38:49 +10:00
beatzaplentyandClaude Sonnet 4.6 0fe7ddf6e8 fix(ipa): reject FQDN input in create-nixos-ipa-host-account.sh
Passing a FQDN like "nixos.sweet.home" instead of the short hostname
"nixos" caused the script to create a double-FQDN IPA host account
(nixos.sweet.home.sweet.home). Add an early check that rejects any
TARGET containing a dot.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 13:23:48 +10:00
beatzaplenty 5c2d61d35a Merge pull request 'fix(ipa): use NOPASSWD sudo for IPA user to bypass broken PAM path' (#87) from worktree-ipa-lxc-kerberos-fix into main
Check NixOS configurations / eval-hosts (push) Failing after 9m45s
Reviewed-on: #87
2026-07-28 03:16:03 +00:00
beatzaplentyandClaude Sonnet 4.6 186e9187ce fix(ipa): use NOPASSWD sudo for IPA user to bypass broken PAM path
Check NixOS configurations / eval-hosts (pull_request) Failing after 9m44s
HM's useUserPackages creates a users.users stub for every configured HM
user, which lands wayne in /etc/passwd. NixOS adds pam_sss.so with the
"localusers" flag to the sudo PAM stack when SSSD is enabled; that flag
causes pam_sss to skip SSSD for any user found in local /etc/passwd,
falling through to pam_unix which has no shadow password for the stub.
Result: sudo auth always fails for the IPA user despite being in wheel.

Use NOPASSWD for the IPA user in sudoers instead. The IPA user already
authenticated to reach a shell (SSH key from IPA or Kerberos), so
re-prompting via a broken PAM path is security theater on a homelab.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 13:12:42 +10:00
beatzaplenty e6f15404f5 Merge pull request 'fix(ipa): add wheel group to IPA user stub for sudo access' (#86) from worktree-ipa-lxc-kerberos-fix into main
Check NixOS configurations / eval-hosts (push) Successful in 10m54s
Reviewed-on: #86
2026-07-28 03:00:33 +00:00
beatzaplentyandClaude Sonnet 4.6 44a0acc18f fix(ipa): add wheel group to IPA user stub for sudo access
Check NixOS configurations / eval-hosts (pull_request) Failing after 28m20s
initgroups() uses NSS (groups: files sss) to build the supplemental
group list at login. Adding wheel to the local users.users stub means
the IPA user gets wheel membership from /etc/group, satisfying sudo's
group check.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 12:59:46 +10:00
beatzaplenty 1fc6e63178 Merge pull request 'Worktree ipa lxc kerberos fix' (#85) from worktree-ipa-lxc-kerberos-fix into main
Check NixOS configurations / eval-hosts (push) Failing after 33m33s
Reviewed-on: #85
2026-07-28 02:55:20 +00:00
beatzaplentyandClaude Sonnet 4.6 3589fc31d7 feat(ipa): add Home Manager config for IPA primary user
Check NixOS configurations / eval-hosts (pull_request) Failing after 40m50s
Any enrolled host now automatically gets a Home Manager profile for the
IPA primary user (vars.ipaUser = "wayne"), covering what IPA doesn't:
dotfiles, user-scoped packages (tmux, sshfs), and EDITOR variable.

The home directory is pre-created by systemd-tmpfiles so HM activation
succeeds on steady-state systems before first login; pam_mkhomedir remains
as a fallback for fresh deploys where SSSD hasn't cached the user yet.

A minimal users.users stub satisfies NixOS's assertion requirements
(isNormalUser + group) that arise because home-manager.useUserPackages
creates a users.users entry to install packages to /etc/profiles/per-user/.
The stub is shadowed by SSSD at runtime (security.ipa sets passwd: sss files).

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 12:53:10 +10:00
beatzaplentyandClaude Sonnet 4.6 89746718a9 feat(shell): make Switch-nix/Test-nix/buildImage system-wide
IPA users (e.g. wayne@) don't get Home Manager so the aliases defined in
aliases.nix were invisible to them. Move Switch-nix, Test-nix, and
buildImage into programs.bash in configuration.nix so every user on every
host gets them via /etc/bashrc. Stub out aliases.nix for future per-user
HM-only additions.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 12:32:33 +10:00
beatzaplenty 232d0e7c40 Merge pull request 'fix(ipa): suppress Kerberos NFS services in LXC containers' (#84) from worktree-ipa-lxc-kerberos-fix into main
Check NixOS configurations / eval-hosts (push) Successful in 10m32s
Reviewed-on: #84
2026-07-28 02:13:47 +00:00
beatzaplentyandClaude Sonnet 4.6 0b60d3ff2d fix(ipa): suppress Kerberos NFS services in LXC containers
Check NixOS configurations / eval-hosts (pull_request) Successful in 10m30s
The NixOS IPA module adds ConditionPathExists=/etc/krb5.keytab drop-ins
for auth-rpcgss-module.service and rpc-gssd.service via systemd.units.
In LXC containers with keytabs those conditions pass, the services start,
and then fail because auth_rpcgss can't be loaded and rpc_pipefs doesn't
exist in the container namespace.

Use lib.mkForce on our systemd.units text to win the conflict with NixOS's
existing definitions, and include ConditionVirtualization=!container
alongside the ConditionPathExists conditions so the services are skipped
(inactive, not failed) in containers that have a keytab.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 12:07:58 +10:00
beatzaplenty ff82e8885d added remaining ipa keytabs
Check NixOS configurations / eval-hosts (push) Successful in 10m22s
2026-07-28 11:45:06 +10:00
beatzaplenty 9a7411d1dd Merge pull request 'Worktree ipa common config' (#83) from worktree-ipa-common-config into main
Check NixOS configurations / eval-hosts (push) Failing after 9m46s
Reviewed-on: #83
2026-07-28 01:43:53 +00:00
beatzaplentyandClaude Sonnet 4.6 2f829ba3e7 refactor(ipa): move FreeIPA client to common config with auto-enrollment
Check NixOS configurations / eval-hosts (pull_request) Failing after 9m48s
modules/ipa/client.nix is now a self-contained NixOS module (no longer a
parameterized function): it checks builtins.pathExists for
secrets/<hostname>.keytab at eval time and enables itself automatically if
found, making it a no-op for hosts without a keytab.

modules/common/configuration.nix imports it so every host in the flake is
a candidate for IPA enrollment — no per-host wiring needed. Adding a
keytab (via scripts/ipa/create-nixos-ipa-host-account.sh) is now the
only step required to enroll a host.

The module also sets networking.domain and networking.nameservers via
mkDefault when active, so new hosts don't need those set explicitly.

Also:
- Remove explicit IPA imports from hosts/nix-cache and hosts/tailscale-router
- Add secrets/pxe-boot.keytab + creation rule; remove incorrect
  secrets/nixos.sweet.home.keytab and its creation rule
- Add .sops.yaml creation rules for all remaining host keytabs
  (server, docker, tor-relay, nix-minimal, nixos) so the creation script
  can target them without manual .sops.yaml edits
- Fix duplicate tailscale-router.keytab rule and corrupted gui.yaml comment
  block in .sops.yaml

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 11:15:59 +10:00
beatzaplenty dedd69dc42 secrets: add IPA keytab for nixos.sweet.home 2026-07-28 10:43:43 +10:00
beatzaplenty f7f670ca4c Merge remote-tracking branch 'origin/worktree-docker-gui-fix'
Check NixOS configurations / eval-hosts (push) Successful in 10m27s
2026-07-28 10:33:15 +10:00
beatzaplenty 55ba283c82 Merge branch 'main' into worktree-docker-gui-fix
Check NixOS configurations / eval-hosts (pull_request) Successful in 10m24s
2026-07-28 00:32:06 +00:00
beatzaplenty 2d46d25a67 Merge pull request 'fix(ipa): harden script and update module docs' (#82) from worktree-ipa-client-module into main
Check NixOS configurations / eval-hosts (push) Failing after 9m45s
Reviewed-on: #82
2026-07-28 00:25:13 +00:00
beatzaplenty e10a1572c3 Merge branch 'main' of https://gitea.lan.ddnsgeek.com/beatzaplenty/nixos
Check NixOS configurations / eval-hosts (push) Successful in 10m25s
2026-07-28 10:23:34 +10:00
beatzaplenty 578ef70aa9 updated flake.lock 2026-07-28 10:23:23 +10:00
beatzaplenty e9fcbbbbcb Merge pull request 'Worktree ipa client module' (#80) from worktree-ipa-client-module into main
Check NixOS configurations / eval-hosts (push) Failing after 9m47s
Reviewed-on: #80
2026-07-28 00:13:08 +00:00
beatzaplenty fc277294f3 add vars to module
Check NixOS configurations / eval-hosts (push) Successful in 10m32s
2026-07-28 10:02:58 +10:00
beatzaplenty f3e5ea67a0 add docker group to user in enable docker service module
Check NixOS configurations / eval-hosts (push) Successful in 10m33s
2026-07-28 09:59:48 +10:00
beatzaplenty 7a8aebf679 Merge branch 'worktree-docker-gui-fix' 2026-07-28 09:59:40 +10:00
beatzaplenty a8d95aad02 enable docker
Check NixOS configurations / eval-hosts (push) Failing after 9m45s
2026-07-28 09:49:14 +10:00
beatzaplentyandClaude Sonnet 4.6 dac5fbd574 feat(gui): enable docker service on workstation
Check NixOS configurations / eval-hosts (pull_request) Failing after 9m45s
Imports docker/enable-service.nix and pins virtualisation.docker to
docker_29 via a nixpkgs overlay. Fixes indentation on `imports` block
and `programs.direnv.enable` line so nixpkgs-fmt passes.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 09:48:59 +10:00
beatzaplenty da0c651c60 Merge branch 'worktree-ipa-client-module' 2026-07-28 09:48:55 +10:00
beatzaplenty 543ea432f0 Merge pull request 'fix(tailscale-router): stop dnsmasq from intercepting host DNS queries' (#79) from worktree-peaceful-stirring-noodle into main
Check NixOS configurations / eval-hosts (push) Successful in 10m33s
Reviewed-on: #79
2026-07-27 23:27:34 +00:00
beatzaplentyandClaude Sonnet 4.6 c7bbf88dce fix(tailscale-router): stop dnsmasq from intercepting host DNS queries
Check NixOS configurations / eval-hosts (pull_request) Successful in 10m30s
NixOS's dnsmasq module defaults resolveLocalQueries to true, which adds
127.0.0.1 to networking.nameservers and binds dnsmasq to listen-address=127.0.0.1.
This made the host route all its own DNS through dnsmasq, which had
no-resolv=true and no upstream for anything outside the tailnet domain —
so every non-tailscale DNS query from the host itself (including SSSD
resolving the IPA server FQDN after the IPA client module was added) failed.

Setting resolveLocalQueries=false limits dnsmasq to its intended role: a
forwarding proxy reachable on the LAN interface for IPA's conditional
forwarder. The host uses domainControllerIp directly (already set in
networking.nameservers in host.nix).

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 09:26:50 +10:00
beatzaplenty d57145b31e add tailscale-router to domain
Check NixOS configurations / eval-hosts (push) Failing after 9m44s
2026-07-28 09:17:29 +10:00
beatzaplenty 1cbe80c0ca secrets: add IPA keytab for tailscale-router 2026-07-28 09:15:21 +10:00
beatzaplenty 01ee261cf8 Merge pull request 'fix(ipa): stream keytab via sudo cat instead of scp' (#78) from worktree-ipa-client-module into main
Check NixOS configurations / eval-hosts (push) Successful in 10m22s
Reviewed-on: #78
2026-07-27 23:14:41 +00:00
beatzaplenty 60b80cbd96 Merge pull request 'fix(ipa): SSH as wayne with sudo instead of root on domain controller' (#77) from worktree-ipa-client-module into main
Check NixOS configurations / eval-hosts (push) Successful in 10m21s
Reviewed-on: #77
2026-07-27 23:06:49 +00:00
beatzaplenty d9cee0a674 Merge pull request 'feat(ipa): add create-nixos-ipa-host-account script' (#76) from worktree-ipa-client-module into main
Check NixOS configurations / eval-hosts (push) Successful in 10m22s
Reviewed-on: #76
2026-07-27 22:58:46 +00:00
beatzaplenty 59316c982e Merge branch 'main' of https://gitea.lan.ddnsgeek.com/beatzaplenty/nixos
Check NixOS configurations / eval-hosts (push) Successful in 10m27s
2026-07-28 07:26:40 +10:00
beatzaplenty 9eca3bd719 Merge pull request 'Worktree ipa client module' (#75) from worktree-ipa-client-module into main
Check NixOS configurations / eval-hosts (push) Failing after 9m45s
Reviewed-on: #75
2026-07-27 21:25:57 +00:00
beatzaplenty c0936a10e7 Merge pull request 'feat(ipa): add reusable declarative FreeIPA client module' (#74) from worktree-ipa-client-module into main
Check NixOS configurations / eval-hosts (push) Failing after 9m45s
Reviewed-on: #74
2026-07-27 21:06:28 +00:00
beatzaplenty b99ba87cf6 Merge branch 'main' of https://gitea.lan.ddnsgeek.com/beatzaplenty/nixos 2026-07-27 23:05:35 +10:00
beatzaplenty bba054db85 Merge branch 'main' of https://gitea.lan.ddnsgeek.com/beatzaplenty/nixos
# Conflicts:
#	variables.nix
2026-07-27 18:29:07 +10:00
beatzaplenty b63a529a1d Merge branch 'fix/static-ips' 2026-07-27 18:25:37 +10:00
beatzaplenty 1ece0c75d9 Merge pull request 'chore(pxe-boot): remove log-dhcp debug flag now that PXE boot is confirmed working' (#86) from fix/pxe-dnsmasq-port-conflict into main
Reviewed-on: #86
2026-07-27 05:52:18 +00:00
beatzaplentyandClaude Sonnet 4.6 548c6f5041 chore(pxe-boot): remove log-dhcp debug flag now that PXE boot is confirmed working
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-27 15:50:19 +10:00
beatzaplenty bae4c8171f Merge pull request 'fix(pxe-boot): use current pxe-boot IP (.247) in dnsmasq until Stage 5 renumber' (#85) from fix/pxe-dnsmasq-port-conflict into main
Reviewed-on: #85
2026-07-27 05:41:38 +00:00
beatzaplentyandClaude Sonnet 4.6 3748c86049 fix(pxe-boot): use current pxe-boot IP (.247) in dnsmasq until Stage 5 renumber
vars.pxeServerIp was already set to the post-renumber target (.223) but the
pxe-boot CT is still at .247, so dnsmasq was advertising .223 as the TFTP server
and the VM couldn't reach it.  Update to .247 so PXE boot works now; the comment
reminds us to flip it back to .223 when Stage 5 step 6 renumbers the CT.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-27 15:40:54 +10:00
beatzaplenty 9dd969cf4c Merge pull request 'fix(pxe-boot): open UDP 4011 for PXE boot service discovery' (#84) from fix/pxe-dnsmasq-port-conflict into main
Reviewed-on: #84
2026-07-27 05:22:46 +00:00
beatzaplentyandClaude Sonnet 4.6 7e4b2d33fb fix(pxe-boot): open UDP 4011 for PXE boot service discovery
After the proxy DHCP handshake, the UEFI client queries the PXE boot
server on UDP port 4011 to get the actual boot filename. This port was
not open in the NixOS firewall, so all four PXE discovery attempts from
the test VM silently timed out. dnsmasq was bound to 0.0.0.0:4011 but
never received the packets.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-27 15:12:12 +10:00
beatzaplenty 288d50fd33 Merge pull request 'Fix/pxe dnsmasq port conflict' (#83) from fix/pxe-dnsmasq-port-conflict into main
Reviewed-on: #83
2026-07-27 05:05:42 +00:00
beatzaplentyandClaude Sonnet 4.6 f0e76f8aff fix(pxe-boot): use pxe-service for proxy DHCP initial boot offers
dnsmasq 2.93 does not send proxy DHCP offers from dhcp-boot alone in proxy
mode — pxe-service is required to trigger proxy offers for the initial boot.

Replace the dhcp-boot-based arch detection with pxe-service entries for
arch 0 (BIOS), 7 (EFI BC / OVMF), and 9 (EFI x86-64), then use dhcp-boot
only for the iPXE second-boot HTTP chain (tag:ipxe clients). Add log-dhcp
for post-deploy verification.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-27 15:03:01 +10:00
27 changed files with 568 additions and 285 deletions
+70 -20
View File
@@ -63,16 +63,6 @@ creation_rules:
- *lxc-nix-cache - *lxc-nix-cache
- *proxmox-nix-cache - *proxmox-nix-cache
# Host keytab for nix-cache FreeIPA enrollment (binary sops file).
# Generate with: sops -e --input-type binary /tmp/nix-cache.keytab > secrets/nix-cache.keytab
- path_regex: secrets/nix-cache\.keytab$
key_groups:
- age:
- *admin
- *linode-nix-cache
- *lxc-nix-cache
- *proxmox-nix-cache
- path_regex: secrets/server\.yaml$ - path_regex: secrets/server\.yaml$
key_groups: key_groups:
- age: - age:
@@ -127,16 +117,6 @@ creation_rules:
# scripts/secrets/sync-host-keys.sh yet, so whichever variant is actually # scripts/secrets/sync-host-keys.sh yet, so whichever variant is actually
# deployed next needs its recipient added here (and `sops updatekeys` rerun) # deployed next needs its recipient added here (and `sops updatekeys` rerun)
# before it can decrypt this. # before it can decrypt this.
# Host keytab for tailscale-router FreeIPA enrollment (binary sops file).
# Generated by scripts/ipa/create-nixos-ipa-host-account.sh.
- path_regex: secrets/tailscale-router\.keytab$
key_groups:
- age:
- *admin
- *lxc-tailscale-router
- *proxmox-tailscale-router
- *linode-tailscale-router
- path_regex: secrets/gui\.yaml$ - path_regex: secrets/gui\.yaml$
key_groups: key_groups:
- age: - age:
@@ -145,3 +125,73 @@ creation_rules:
- *baremetal-gui - *baremetal-gui
- *linode-gui - *linode-gui
- *proxmox-gui - *proxmox-gui
# IPA host keytabs (binary sops files).
# Each keytab is encrypted for all platform variants of that host so any
# deployed variant can decrypt it at boot. Run
# scripts/ipa/create-nixos-ipa-host-account.sh <hostname> to enroll a new
# host and produce the keytab; this section is updated by that script.
- path_regex: secrets/nix-cache\.keytab$
key_groups:
- age:
- *admin
- *linode-nix-cache
- *lxc-nix-cache
- *proxmox-nix-cache
- path_regex: secrets/tailscale-router\.keytab$
key_groups:
- age:
- *admin
- *linode-tailscale-router
- *lxc-tailscale-router
- *proxmox-tailscale-router
- path_regex: secrets/pxe-boot\.keytab$
key_groups:
- age:
- *admin
- *lxc-pxe-boot
- *proxmox-pxe-boot
# nixos = the workstation (hosts/nixos/host.nix). All gui platform variants
# share the hostname "nixos" and must be able to decrypt at boot.
- path_regex: secrets/nixos\.keytab$
key_groups:
- age:
- *admin
- *baremetal-gui
- *lxc-gui
- *proxmox-gui
- *linode-gui
- path_regex: secrets/server\.keytab$
key_groups:
- age:
- *admin
- *linode-server
- *lxc-server
- *proxmox-server
- path_regex: secrets/docker\.keytab$
key_groups:
- age:
- *admin
- *linode-docker
- *lxc-docker
- *proxmox-docker
- path_regex: secrets/tor-relay\.keytab$
key_groups:
- age:
- *admin
- *lxc-tor-relay
- path_regex: secrets/nix-minimal\.keytab$
key_groups:
- age:
- *admin
- *lxc-minimal
- *proxmox-minimal
- *linode-minimal
+8 -6
View File
@@ -6,12 +6,14 @@ This repository contains flake-based NixOS configurations for Wayne's LAN
servers and workstation. servers and workstation.
The flake exposes NixOS configurations named `<platform>-<buildtype>` The flake exposes NixOS configurations named `<platform>-<buildtype>`
(platforms: `linode`, `proxmox`, `lxc`; build types: `minimal`, `nix-cache`, (platforms: `linode`, `proxmox`, `lxc`, `baremetal`; build types: `minimal`,
`server`, `docker`, `gui`, `pxe-boot`, `tailscale-exit-node`, `tor-relay`), generated from `modules/platforms/*` `nix-cache`, `server`, `docker`, `gui`, `pxe-boot`, `tailscale-router`,
and `modules/build-types/*` by the `mkTarget` function in `flake.nix`. Not `tor-relay`, `ha-server`), generated from `modules/platforms/*` and
every combination is built — `pxe-boot` has no `linode` variant. See `modules/build-types/*` by the `mkTarget` function in `flake.nix`. Not every
`README.md` for the full current target list; treat `flake.nix` as the combination is built — `pxe-boot` has no `linode` variant, `ha-server` only
source of truth since this list can drift. exists on `proxmox`, and `tor-relay` only exists on `lxc`. See `README.md`
for the full current target list; treat `flake.nix` as the source of truth
since this list can drift.
Do not deploy, switch, reboot, repartition, format disks, or run destructive Do not deploy, switch, reboot, repartition, format disks, or run destructive
install commands from this repository unless explicitly asked. install commands from this repository unless explicitly asked.
+10 -11
View File
@@ -10,13 +10,13 @@ pieces composed in `flake.nix`:
- **Platforms** (what it runs on): `linode`, `proxmox`, `lxc`, `baremetal` - **Platforms** (what it runs on): `linode`, `proxmox`, `lxc`, `baremetal`
- **Build types** (what it's for): `minimal`, `nix-cache`, `server`, `docker`, - **Build types** (what it's for): `minimal`, `nix-cache`, `server`, `docker`,
`gui`, `pxe-boot`, `tailscale-exit-node`, `tor-relay` `gui`, `pxe-boot`, `tailscale-router`, `tor-relay`, `ha-server`
Not every combination exists — `pxe-boot` has no `linode` variant, since Not every combination exists — `pxe-boot` has no `linode` variant, since
PXE/DHCP/TFTP need LAN L2 adjacency that a Linode VPS doesn't have, PXE/DHCP/TFTP need LAN L2 adjacency that a Linode VPS doesn't have,
`tor-relay` currently only exists as `lxc-tor-relay`, and `baremetal` `tor-relay` and `ha-server` currently only exist on `lxc`/`proxmox`, and
currently only exists as `baremetal-gui` (the real gui-host hardware). The `baremetal` currently only exists as `baremetal-gui` (the real gui-host
full list: hardware). The full list:
| Target | Purpose | | Target | Purpose |
| --- | --- | | --- | --- |
@@ -29,8 +29,9 @@ full list:
| `linode-gui` / `proxmox-gui` / `lxc-gui` | Cinnamon desktop workstation — previously the flat `nixos` target | | `linode-gui` / `proxmox-gui` / `lxc-gui` | Cinnamon desktop workstation — previously the flat `nixos` target |
| `baremetal-gui` | Same Cinnamon desktop workstation, on the real gui-host hardware — ZFS RAID0 root, systemd-boot | | `baremetal-gui` | Same Cinnamon desktop workstation, on the real gui-host hardware — ZFS RAID0 root, systemd-boot |
| `proxmox-pxe-boot` / `lxc-pxe-boot` | HTTP/iPXE boot asset host — previously the flat `pxe-boot` target | | `proxmox-pxe-boot` / `lxc-pxe-boot` | HTTP/iPXE boot asset host — previously the flat `pxe-boot` target |
| `linode-tailscale-exit-node` / `proxmox-tailscale-exit-node` / `lxc-tailscale-exit-node` | Tailscale exit node | | `linode-tailscale-router` / `proxmox-tailscale-router` / `lxc-tailscale-router` | Tailscale subnet router + MagicDNS forwarder for the LAN |
| `lxc-tor-relay` | Tor middle relay | | `lxc-tor-relay` | Tor middle relay |
| `proxmox-ha-server-1` / `proxmox-ha-server-2` | HA file-server cluster nodes — DRBD + XFS + iSCSI + NFS, managed by Corosync + Pacemaker |
Which variant of a given buildtype is actually deployed isn't tracked Which variant of a given buildtype is actually deployed isn't tracked
anywhere in this repo — that's live infrastructure state, not something a anywhere in this repo — that's live infrastructure state, not something a
@@ -47,8 +48,7 @@ section for which is which.
Each buildtype's `hosts/<name>/host.nix` carries the per-machine identity Each buildtype's `hosts/<name>/host.nix` carries the per-machine identity
(hostname, hostId, per-machine secrets, `system.stateVersion`) that must stay (hostname, hostId, per-machine secrets, `system.stateVersion`) that must stay
fixed regardless of which platform it's built for — see fixed regardless of which platform it's built for. Every deployed host
`flake-target-refactor-spec.md` for the full rationale. Every deployed host
stamps its own active target name into `/etc/flake-target` at build time, so stamps its own active target name into `/etc/flake-target` at build time, so
`nixos-rebuild switch --flake .#$(cat /etc/flake-target)` always picks up the `nixos-rebuild switch --flake .#$(cat /etc/flake-target)` always picks up the
right one even after a platform migration changes the flake attribute name. right one even after a platform migration changes the flake attribute name.
@@ -167,7 +167,6 @@ per-boot host key for sops-nix to derive from on ephemeral media) — see
(`vars/per-machine/<target>/openssh/`, committed and sops-encrypted) for (`vars/per-machine/<target>/openssh/`, committed and sops-encrypted) for
their SSH host keys. their SSH host keys.
This repository's git *history* still contains secrets committed before this This repository's git *history* still contains secrets committed before the
migration (see `remove-sensetive-info-refactor.md`) — those are being sops-nix migration — those are being scrubbed and rotated separately; don't
scrubbed and rotated separately; don't treat the repo as safe to make public treat the repo as safe to make public until that's finished.
until that's finished.
+5 -3
View File
@@ -22,7 +22,7 @@ see "LXC hosts" immediately below for why those are different.**
## LXC hosts ## LXC hosts
`lxc-*` targets (`lxc-minimal`, `lxc-nix-cache`, `lxc-server`, `lxc-docker`, `lxc-*` targets (`lxc-minimal`, `lxc-nix-cache`, `lxc-server`, `lxc-docker`,
`lxc-gui`, `lxc-pxe-boot`, `lxc-tailscale-exit-node`, `lxc-tor-relay`) are **not** installed via `auto-install.sh` — the `lxc-gui`, `lxc-pxe-boot`, `lxc-tailscale-router`, `lxc-tor-relay`) are **not** installed via `auto-install.sh` — the
interactive menu deliberately excludes them. Don't try to select one there; interactive menu deliberately excludes them. Don't try to select one there;
`nixos-install` would bind-mount `/` onto `/mnt` (LXC containers have no raw `nixos-install` would bind-mount `/` onto `/mnt` (LXC containers have no raw
disk to partition) and then refuse to touch the filesystem it's currently disk to partition) and then refuse to touch the filesystem it's currently
@@ -133,13 +133,15 @@ Flake outputs:
```nix ```nix
nixosConfigurations.installer # ISO/netboot installer image nixosConfigurations.installer # ISO/netboot installer image
packages.x86_64-linux.iso # installer ISO/netboot image packages.x86_64-linux.iso # installer ISO/netboot image
packages.x86_64-linux.pxe # netboot-ipxe + netboot-initrd + netboot-kernel, bundled packages.x86_64-linux.pxe # auto-installer netboot bundle (kernel + initrd + ipxe script)
packages.x86_64-linux.pxe-minimal # vanilla NixOS minimal netboot bundle (no installer wiring)
``` ```
```sh ```sh
nix build .#iso nix build .#iso
nix build .#pxe nix build .#pxe
nix build .#pxe-minimal
``` ```
There's no `nixosConfigurations.proxmox-lxc` (installer-boots-as-an-LXC- There's no `nixosConfigurations.proxmox-lxc` (installer-boots-as-an-LXC-
Generated
+6 -6
View File
@@ -173,11 +173,11 @@
] ]
}, },
"locked": { "locked": {
"lastModified": 1784350909, "lastModified": 1785119570,
"narHash": "sha256-ZWyzLbS1yKUTeFJLmdVuWNnHttL333/ldJbEE+KzCrM=", "narHash": "sha256-Rgs2xKnGLFWQscxUaXX07oyZeuMDOHEbqDOsgliLFGM=",
"owner": "nix-community", "owner": "nix-community",
"repo": "home-manager", "repo": "home-manager",
"rev": "4ce190229c73d44536caa7072f6308fb2d8feeb3", "rev": "d4fd24667c8cbef124bb70a20380cab75ec8474d",
"type": "github" "type": "github"
}, },
"original": { "original": {
@@ -259,11 +259,11 @@
}, },
"nixpkgs_2": { "nixpkgs_2": {
"locked": { "locked": {
"lastModified": 1784432872, "lastModified": 1785104993,
"narHash": "sha256-n3gKTBIV4ZA5VQpUakffBe3KGu4+mhPoA34rrqS0GkA=", "narHash": "sha256-eKbrvPoAOFutbYMdbB3r5EQVmFxKv24iKqHPPUXA0gM=",
"owner": "NixOS", "owner": "NixOS",
"repo": "nixpkgs", "repo": "nixpkgs",
"rev": "fd1462031fdee08f65fd0b4c6b64e22239a77870", "rev": "8623c4c20aa4ca2f5fb81510d2944066c3fb0d96",
"type": "github" "type": "github"
}, },
"original": { "original": {
+5
View File
@@ -14,6 +14,11 @@
}; };
boot.zfs.forceImportRoot = false; boot.zfs.forceImportRoot = false;
# Only advertise the LAN interface to IPA DNS. Without this, SSSD registers
# every Docker bridge (172.x.x.x) as an A record for docker.sweet.home —
# the default dyndns.interface = "*" catches them all.
security.ipa.dyndns.interface = vars.lxcLanInterface; # eth0
# Preserved from the pre-refactor `docker` target — stateVersion must never # Preserved from the pre-refactor `docker` target — stateVersion must never
# be bumped on an already-installed machine. # be bumped on an already-installed machine.
system.stateVersion = "25.05"; system.stateVersion = "25.05";
-6
View File
@@ -6,15 +6,10 @@
name = "nix-cache"; name = "nix-cache";
sopsFile = ../../secrets/nix-cache.yaml; sopsFile = ../../secrets/nix-cache.yaml;
}) })
(import ../../modules/ipa/client.nix {
keytabSopsFile = ../../secrets/nix-cache.keytab;
caCertFile = ../../certs/ipa-ca.crt;
})
]; ];
networking = { networking = {
hostName = vars.nixCacheHost; hostName = vars.nixCacheHost;
domain = vars.homeDomain;
useDHCP = false; useDHCP = false;
interfaces.${vars.lxcLanInterface}.ipv4.addresses = [{ interfaces.${vars.lxcLanInterface}.ipv4.addresses = [{
address = vars.nixCacheIp; address = vars.nixCacheIp;
@@ -25,7 +20,6 @@
}; };
services.beszel.agent.environment = { services.beszel.agent.environment = {
#DOCKER_HOST = "tcp://docker-socket-proxy:2375";
KEY = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFPR9kwtC4TAeTRu46A7+opZsYpxqkRJ+x/ZyB2GWCeG"; KEY = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFPR9kwtC4TAeTRu46A7+opZsYpxqkRJ+x/ZyB2GWCeG";
}; };
-1
View File
@@ -21,7 +21,6 @@
}; };
services.beszel.agent.environment = { services.beszel.agent.environment = {
#DOCKER_HOST = "tcp://docker-socket-proxy:2375";
KEY = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFPR9kwtC4TAeTRu46A7+opZsYpxqkRJ+x/ZyB2GWCeG"; KEY = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFPR9kwtC4TAeTRu46A7+opZsYpxqkRJ+x/ZyB2GWCeG";
EXTRA_FILESYSTEMS = "${vars.storageRoot}/${vars.nfsShares.dockerVolumes.subpath}"; EXTRA_FILESYSTEMS = "${vars.storageRoot}/${vars.nfsShares.dockerVolumes.subpath}";
LOG_LEVEL = "debug"; LOG_LEVEL = "debug";
-5
View File
@@ -6,15 +6,10 @@
name = "tailscale-router"; name = "tailscale-router";
sopsFile = ../../secrets/tailscale-router.yaml; sopsFile = ../../secrets/tailscale-router.yaml;
}) })
(import ../../modules/ipa/client.nix {
keytabSopsFile = ../../secrets/tailscale-router.keytab;
caCertFile = ../../certs/ipa-ca.crt;
})
]; ];
networking = { networking = {
hostName = "tailscale-router"; hostName = "tailscale-router";
domain = vars.homeDomain;
useDHCP = false; useDHCP = false;
interfaces.${vars.lxcLanInterface}.ipv4.addresses = [{ interfaces.${vars.lxcLanInterface}.ipv4.addresses = [{
address = vars.tailscaleRouterIp; address = vars.tailscaleRouterIp;
+12 -1
View File
@@ -1,6 +1,17 @@
{ config, pkgs, lib, inputs, vars, ... }: { config, pkgs, lib, inputs, vars, ... }:
{ {
imports = [
../docker/enable-service.nix
];
nixpkgs.overlays = [
(final: prev: {
docker = prev.docker_29;
docker_cli = prev.docker_29;
})
];
environment.systemPackages = with pkgs; [ environment.systemPackages = with pkgs; [
inputs.nixos-conf-editor.packages.${pkgs.stdenv.hostPlatform.system}.nixos-conf-editor inputs.nixos-conf-editor.packages.${pkgs.stdenv.hostPlatform.system}.nixos-conf-editor
nodejs nodejs
@@ -18,7 +29,7 @@
]; ];
boot.loader.grub.useOSProber = true; boot.loader.grub.useOSProber = true;
programs.direnv.enable = true; programs.direnv.enable = true;
services = { services = {
xserver = { xserver = {
enable = true; enable = true;
+11 -10
View File
@@ -15,6 +15,16 @@
# under services.beszel.agent.environment.KEY once the hub accepts the # under services.beszel.agent.environment.KEY once the hub accepts the
# new agents, following the pattern in hosts/server/host.nix. # new agents, following the pattern in hosts/server/host.nix.
{ lib, vars, ... }: { lib, vars, ... }:
let
# Generates /etc/exports lines for all nfsShares data entries. Shared
# pattern with modules/build-types/server.nix — both export the same
# set of shares, differing only in the storage root they serve from.
mkNfsExports = storageRoot:
lib.concatMapStrings
(share: " ${storageRoot}/${share.subpath} ${vars.lanCidr}${vars.nfsShares.options}\n")
(lib.filter builtins.isAttrs (lib.attrValues vars.nfsShares));
in
{ {
imports = [ imports = [
../ha/pacemaker-stack.nix ../ha/pacemaker-stack.nix
@@ -25,16 +35,7 @@
services.nfs.server = { services.nfs.server = {
enable = true; enable = true;
exports = '' exports = mkNfsExports vars.haStorageRoot;
${vars.haStorageRoot}/${vars.nfsShares.dockerConfig.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.haStorageRoot}/${vars.nfsShares.dockerVolumes.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.haStorageRoot}/${vars.nfsShares.dockerDatabases.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.haStorageRoot}/${vars.nfsShares.nextcloudData.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.haStorageRoot}/${vars.nfsShares.raspiVolumes.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.haStorageRoot}/${vars.nfsShares.proxmoxIsos.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.haStorageRoot}/${vars.nfsShares.proxmoxLxcImages.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.haStorageRoot}/${vars.nfsShares.pxebootImages.subpath} ${vars.lanCidr}${vars.nfsShares.options}
'';
}; };
# Pacemaker controls nfs-server — prevent systemd from starting it at boot # Pacemaker controls nfs-server — prevent systemd from starting it at boot
+10 -10
View File
@@ -13,6 +13,15 @@ let
lib.concatMap (share: ancestors share.subpath) lib.concatMap (share: ancestors share.subpath)
(lib.filter builtins.isAttrs (lib.attrValues vars.nfsShares)) (lib.filter builtins.isAttrs (lib.attrValues vars.nfsShares))
); );
# Generates /etc/exports lines for all nfsShares data entries (every
# attrset value — excludes the bare `options` string). Both server and
# ha-server export the same share set from different storage roots, so
# this helper is the single source of truth for the export line format.
mkNfsExports = storageRoot:
lib.concatMapStrings
(share: " ${storageRoot}/${share.subpath} ${vars.lanCidr}${vars.nfsShares.options}\n")
(lib.filter builtins.isAttrs (lib.attrValues vars.nfsShares));
in in
{ {
imports = [ imports = [
@@ -95,16 +104,7 @@ in
services.nfs.server = { services.nfs.server = {
enable = true; enable = true;
exports = '' exports = mkNfsExports vars.storageRoot;
${vars.storageRoot}/${vars.nfsShares.dockerConfig.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.storageRoot}/${vars.nfsShares.dockerVolumes.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.storageRoot}/${vars.nfsShares.dockerDatabases.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.storageRoot}/${vars.nfsShares.nextcloudData.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.storageRoot}/${vars.nfsShares.raspiVolumes.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.storageRoot}/${vars.nfsShares.proxmoxIsos.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.storageRoot}/${vars.nfsShares.proxmoxLxcImages.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.storageRoot}/${vars.nfsShares.pxebootImages.subpath} ${vars.lanCidr}${vars.nfsShares.options}
'';
}; };
# mountd (20048) is needed for showmount/NFSv3 mount protocol — without it # mountd (20048) is needed for showmount/NFSv3 mount protocol — without it
+4 -47
View File
@@ -1,50 +1,7 @@
{ config, pkgs, lib, vars, ... }: _:
let
# Flake attribute names are now <platform>-<buildtype> (e.g. proxmox-docker)
# and no longer match networking.hostName, since a host's hostname stays
# fixed while the platform backing it can change. Each nixosConfiguration
# stamps its own active target name into /etc/flake-target at build time.
mySwitchCmd = ''
sudo nixos-rebuild switch \
--no-write-lock-file \
--refresh \
--flake git+https://${vars.lanDomain}/beatzaplenty/nixos.git#$(cat /etc/flake-target)
'';
myTestCmd = ''
sudo nixos-rebuild test \
--no-write-lock-file \
--refresh \
--flake git+https://${vars.lanDomain}/beatzaplenty/nixos.git#$(cat /etc/flake-target)
'';
# lxc-* hosts pre-seed their SSH host key at build time (see
# modules/platforms/lxc.nix) so sops-nix's .sops.yaml recipient matches on
# first boot -- without it, secrets permanently fail to decrypt (see that
# file's comment for the confirmed failure). That requires --impure plus
# NIXOS_HOST_KEYS_DIR pointing at the repo's host-keys/ dir, same pattern
# docs/auto-installer.md uses for the installer ISO. A function, not a
# shellAlias, since the target name has to interpolate into the middle of
# the flake attribute path, not just append after it. Must be run from the
# repo root, same as every other host-keys/ command in this repo.
buildImageFn = ''
buildImage() {
if [ -z "$1" ]; then
echo "usage: buildImage <flake-target> (e.g. lxc-docker)" >&2
return 1
fi
NIXOS_HOST_KEYS_DIR="$(pwd)/host-keys" nix build --impure \
".#nixosConfigurations.$1.config.system.build.tarball"
}
'';
in
{ {
programs.bash = { # Switch-nix, Test-nix, and buildImage are defined system-wide in
enable = true; # modules/common/configuration.nix so all users (including IPA accounts)
shellAliases = { # get them. Add any Home-Manager-only per-user shell config here.
"Switch-nix" = mySwitchCmd;
"Test-nix" = myTestCmd;
};
initExtra = buildImageFn;
};
} }
+38 -10
View File
@@ -1,17 +1,45 @@
{ config, lib, pkgs, vars, ... }: { config, lib, pkgs, vars, ... }:
let
switchCmd = ''
sudo nixos-rebuild switch \
--no-write-lock-file \
--refresh \
--flake git+https://${vars.lanDomain}/beatzaplenty/nixos.git#$(cat /etc/flake-target)
'';
testCmd = ''
sudo nixos-rebuild test \
--no-write-lock-file \
--refresh \
--flake git+https://${vars.lanDomain}/beatzaplenty/nixos.git#$(cat /etc/flake-target)
'';
buildImageFn = ''
buildImage() {
if [ -z "$1" ]; then
echo "usage: buildImage <flake-target> (e.g. lxc-docker)" >&2
return 1
fi
NIXOS_HOST_KEYS_DIR="$(pwd)/host-keys" nix build --impure \
".#nixosConfigurations.$1.config.system.build.tarball"
}
'';
in
{ {
imports = imports = [
[ ./set-locale.nix
# Include the results of the hardware scan. ../ipa/client.nix
# ./hardware-configuration.nix ];
./set-locale.nix
];
# Use the GRUB 2 boot loader.
# boot.loader.grub.enable = true;
#boot.loader.grub.device = "/dev/sda"; # or "nodev" for efi only
networking.networkmanager.enable = true; # Easiest to use and most distros use this by default. # System-wide shell config so all users (including IPA accounts) get the
# same management aliases as the local nixos user's Home Manager provides.
programs.bash = {
shellAliases = {
"Switch-nix" = switchCmd;
"Test-nix" = testCmd;
};
interactiveShellInit = buildImageFn;
};
networking.networkmanager.enable = true;
# Recommended over the true default (bypasses ZFS's own import safeguards) # Recommended over the true default (bypasses ZFS's own import safeguards)
# per the option's own docs; matches hosts/docker/host.nix and # per the option's own docs; matches hosts/docker/host.nix and
+35
View File
@@ -0,0 +1,35 @@
# Shared activation-script logic to preserve the SSH host key across
# nixos-rebuild on platforms that embed the key via environment.etc (lxc and
# proxmox). When NIXOS_HOST_KEYS_DIR is not set the key is absent from
# environment.etc, and NixOS's etc activation removes any /etc file not in
# the new generation — which would destroy the live key and break sops-nix
# decryption permanently. These scripts save the key to /run before etc
# removes it, then restore it afterward.
#
# Explicit deps enforce the correct ordering: without them the topological
# sort places preserveSshHostKey after etc (confirmed live on lxc-tor-relay:
# position 7 vs etc's position 5), so the key is gone before it can be saved.
_: {
system.activationScripts = {
preserveSshHostKey = ''
if [ -f /etc/ssh/ssh_host_ed25519_key ]; then
cp /etc/ssh/ssh_host_ed25519_key /run/sshd-host-key-preserve.tmp
cp /etc/ssh/ssh_host_ed25519_key.pub /run/sshd-host-key-preserve.pub.tmp
fi
'';
restoreSshHostKey = {
deps = [ "etc" ];
text = ''
if [ ! -f /etc/ssh/ssh_host_ed25519_key ] && [ -f /run/sshd-host-key-preserve.tmp ]; then
install -m 0600 /run/sshd-host-key-preserve.tmp /etc/ssh/ssh_host_ed25519_key
install -m 0644 /run/sshd-host-key-preserve.pub.tmp /etc/ssh/ssh_host_ed25519_key.pub
fi
rm -f /run/sshd-host-key-preserve.tmp /run/sshd-host-key-preserve.pub.tmp
'';
};
etc = { deps = [ "preserveSshHostKey" ]; };
setupSecrets = { deps = [ "restoreSshHostKey" ]; };
};
}
+34 -12
View File
@@ -1,23 +1,45 @@
{ pkgs, ... }: { lib, pkgs, vars, ... }:
let
gid = toString vars.dockerAccessGid;
in
{ {
# virtualisation.docker.enable = true;
virtualisation.docker = { virtualisation.docker = {
enable = true; enable = true;
package = pkgs.docker; package = pkgs.docker;
# listenOptions = [
# "unix:///var/run/docker.sock"
# "tcp://0.0.0.0:2375"
#];
# daemon.settings = {
# metrics-addr = "0.0.0.0:9323";
# experimental = true;
# };
}; };
# Pin the docker group GID to match the IPA "docker-access" group so that
# IPA group membership alone grants access to the Docker socket. Any user
# whose supplementary groups (resolved by SSSD from IPA) include GID
# vars.dockerAccessGid will pass the socket group-permission check without
# any per-host users.groups.docker.members entry.
users.groups.docker.gid = lib.mkForce vars.dockerAccessGid;
users.users.${vars.primaryUser}.extraGroups = [ "docker" ];
environment.systemPackages = with pkgs; [ environment.systemPackages = with pkgs; [
docker-compose docker-compose
docker-buildx docker-buildx
]; ];
# NixOS's group activation uses plain `groupmod` without --non-unique.
# When SSSD is active it exposes the IPA "docker-access" group at
# vars.dockerAccessGid via NSS, so groupmod sees that GID as already in
# use and silently skips the change (warning: "not applying GID change").
# This script runs after the normal "groups" step and applies the change
# with --non-unique (which lets the local docker group share the GID with
# the SSSD-provided IPA group). If the GID actually changed it also
# restarts docker.socket so the socket is recreated with the new GID.
system.activationScripts.docker-group-gid = {
deps = [ "groups" ];
text = ''
current=$(grep "^docker:" /etc/group | cut -d: -f3)
if [ "$current" != "${gid}" ]; then
${pkgs.shadow}/bin/groupmod --non-unique -g ${gid} docker
if ${pkgs.systemd}/bin/systemctl is-active --quiet docker.socket; then
${pkgs.systemd}/bin/systemctl stop docker.service docker.socket
rm -f /var/run/docker.sock
${pkgs.systemd}/bin/systemctl start docker.socket docker.service
fi
fi
'';
};
} }
+168 -61
View File
@@ -1,34 +1,15 @@
# Fully declarative FreeIPA domain membership. # Fully declarative FreeIPA domain membership.
# #
# Configures security.ipa (SSSD, Kerberos, PAM, NSSwitch) and places a # Imported by modules/common/configuration.nix — no per-host wiring needed.
# pre-provisioned host keytab via sops-nix so no imperative ipa-client-install # Enables itself automatically on any host that has a sops-encrypted keytab
# step is needed after deployment. # at secrets/<hostname>.keytab; is a no-op for all other hosts.
# #
# Usage (in a host.nix imports list): # To enroll a new host:
# (import ../../modules/ipa/client.nix { # 0. scripts/secrets/sync-host-keys.sh <flake-target>
# keytabSopsFile = ../../secrets/<hostname>.keytab; # 1. scripts/ipa/create-nixos-ipa-host-account.sh [--ip <addr>] <hostname>
# caCertFile = ../../certs/ipa-ca.crt; # already committed — do not re-fetch # (adds .sops.yaml rule, runs ipa host-add, encrypts keytab in one step)
# }) # 2. git add secrets/<hostname>.keytab .sops.yaml && git commit
# # 3. Deploy — no further steps required.
# The host.nix networking block must also set:
# networking.domain = vars.homeDomain; # needed for Kerberos FQDN
# networking.nameservers = [ vars.domainControllerIp ]; # IPA DNS
#
# One-time operator setup per host (do this BEFORE deploying):
#
# 0. Generate SSH host keys and the host's age key for sops:
# scripts/secrets/sync-host-keys.sh <flake-target>
# This must run before step 1 so the host age key is in .sops.yaml
# and the keytab can be encrypted for the host to read at boot.
#
# 1. Add the IPA host account and produce the sops-encrypted keytab:
# scripts/ipa/create-nixos-ipa-host-account.sh [--ip <addr>] <hostname>
# The script handles ipa host-add, ipa-getkeytab, .sops.yaml patching,
# and sops encryption in one step. See the script header for details.
#
# 2. Wire up the host (see "Usage" above), then deploy:
# nixos-rebuild switch (or create-proxmox-resource.sh)
# No further manual enrollment steps are required after deployment.
# #
# Manual fallback (if the script isn't usable): # Manual fallback (if the script isn't usable):
# a. On the FreeIPA server: ipa host-add <fqdn> [--ip-address=<ip>] --force # a. On the FreeIPA server: ipa host-add <fqdn> [--ip-address=<ip>] --force
@@ -38,61 +19,146 @@
# sops -e --input-type binary -i secrets/<host>.keytab # sops -e --input-type binary -i secrets/<host>.keytab
# d. Commit secrets/<host>.keytab and the updated .sops.yaml, then deploy. # d. Commit secrets/<host>.keytab and the updated .sops.yaml, then deploy.
# #
# vars dependencies: homeDomain, ipaServer, domainControllerIp # vars dependencies: homeDomain, ipaServer, domainControllerIp, ipaUser
{ keytabSopsFile, caCertFile }:
{ config, lib, pkgs, vars, ... }: { config, lib, pkgs, vars, ... }:
let let
keytabPath = ../../secrets + "/${config.networking.hostName}.keytab";
enabled = builtins.pathExists keytabPath;
realm = lib.strings.toUpper vars.homeDomain; realm = lib.strings.toUpper vars.homeDomain;
fqdn = "${config.networking.hostName}.${vars.homeDomain}"; fqdn = "${config.networking.hostName}.${vars.homeDomain}";
# "sweet.home" -> "dc=sweet,dc=home" # "sweet.home" -> "dc=sweet,dc=home"
basedn = lib.strings.concatMapStringsSep "," (c: "dc=${c}") (lib.strings.splitString "." vars.homeDomain); basedn = lib.strings.concatMapStringsSep "," (c: "dc=${c}") (lib.strings.splitString "." vars.homeDomain);
# security.ipa.certificate expects a derivation (package), not a raw path. # security.ipa.certificate expects a derivation (package), not a raw path.
caCertPkg = pkgs.writeText "ipa-ca.crt" (builtins.readFile caCertFile); caCertPkg = pkgs.writeText "ipa-ca.crt" (builtins.readFile ../../certs/ipa-ca.crt);
in in
{ lib.mkIf enabled {
security.ipa = { networking.domain = lib.mkDefault vars.homeDomain;
enable = true; networking.nameservers = lib.mkDefault [ vars.domainControllerIp ];
domain = vars.homeDomain;
realm = realm; security = {
server = vars.ipaServer; ipa = {
certificate = caCertPkg; enable = true;
basedn = basedn; domain = vars.homeDomain;
ipaHostname = fqdn; inherit realm;
offlinePasswords = true; server = vars.ipaServer;
cacheCredentials = true; certificate = caCertPkg;
inherit basedn;
ipaHostname = fqdn;
offlinePasswords = true;
cacheCredentials = true;
};
# Create the home directory on first login if it doesn't exist yet.
# IPA users have no pre-created home on the host; without this sshd
# opens a session to a non-existent directory and resets the connection.
# lightdm also needs this so the GUI login path can create the home dir
# if it was not pre-seeded by the tmpfiles rule above (e.g. on first boot
# before SSSD has resolved the user).
pam.services = {
sshd.makeHomeDir = true;
lightdm.makeHomeDir = true;
# pam_unix returns PAM_AUTHINFO_UNAVAIL without prompting when the local
# stub has "!" in shadow (account locked), so PAM_AUTHTOK is never set
# and pam_sss's use_first_pass fails with "No authentication token".
# Changing to try_first_pass makes pam_sss prompt independently when no
# prior module has set the token, restoring IPA password login via
# LightDM and su.
login.rules.auth.sss.settings = lib.mkForce { try_first_pass = true; };
su.rules.auth.sss.settings = lib.mkForce { try_first_pass = true; };
};
# HM with useUserPackages = true (flake.nix) sets users.users.${ipaUser}.packages,
# which forces the stub into /etc/passwd. pam_sss.so with the "localusers" flag
# (added by NixOS when SSSD is enabled) then skips SSSD for any user it finds in
# local /etc/passwd — including this stub — falling through to pam_unix, which has
# no password for the stub → sudo auth always fails.
#
# Fix: NOPASSWD for the IPA user. The IPA user already authenticated to reach a
# shell (SSH public key from IPA or Kerberos), so re-prompting via a broken PAM
# path is security theater on a single-admin homelab.
sudo.extraRules = [{
users = [ vars.ipaUser ];
commands = [{ command = "ALL"; options = [ "NOPASSWD" ]; }];
}];
}; };
# Fetch SSH public keys from IPA so users can log in with the key stored systemd = {
# in their IPA profile rather than needing ~/.ssh/authorized_keys on every # Fetch SSH public keys from IPA so users can log in with the key stored
# host. sss_ssh_authorizedkeys queries SSSD (which queries IPA LDAP). # in their IPA profile rather than needing ~/.ssh/authorized_keys on every
# # host. sss_ssh_authorizedkeys queries SSSD (which queries IPA LDAP).
# /nix/store is 1775 (group-writable by nixbld). OpenSSH 10.0+ rejects #
# AuthorizedKeysCommand binaries whose path contains any group-writable # /nix/store is 1775 (group-writable by nixbld). OpenSSH 10.0+ rejects
# component, silently skipping the command. Copy to /usr/local/bin (all # AuthorizedKeysCommand binaries whose path contains any group-writable
# components root-owned, 755) so the path passes sshd's safety check. # component, silently skipping the command. Copy to /usr/local/bin (all
systemd.tmpfiles.rules = [ # components root-owned, 755) so the path passes sshd's safety check.
"d /usr/local 0755 root root - -" tmpfiles.rules = [
"d /usr/local/bin 0755 root root - -" "d /usr/local 0755 root root - -"
"C+ /usr/local/bin/sss_ssh_authorizedkeys 0555 root root - ${pkgs.sssd}/bin/sss_ssh_authorizedkeys" "d /usr/local/bin 0755 root root - -"
]; "C+ /usr/local/bin/sss_ssh_authorizedkeys 0555 root root - ${pkgs.sssd}/bin/sss_ssh_authorizedkeys"
# Pre-create the IPA user's home dir so Home Manager activation succeeds
# even before their first login. On a fresh system SSSD may not have
# resolved the user yet — tmpfiles warns and skips in that case (non-fatal),
# and pam_mkhomedir covers the first-login path as a fallback.
"d /home/${vars.ipaUser} 0700 ${vars.ipaUser} ${vars.ipaUser} - -"
];
# security.ipa enables Kerberos (security.krb5) which causes systemd to
# start auth-rpcgss-module.service and rpc-gssd.service for Kerberos NFS
# authentication. LXC containers can't load the auth_rpcgss kernel module
# and don't have /var/lib/nfs/rpc_pipefs, so both services fail.
#
# The NixOS IPA module already adds a drop-in for auth-rpcgss-module.service
# with ConditionPathExists=/etc/krb5.keytab. We use lib.mkForce to win the
# text conflict and add ConditionVirtualization=!container alongside it so
# the service is skipped (not failed) in containers that do have a keytab.
# Same fix for rpc-gssd.service which also fails in containers.
units = lib.mkIf config.boot.isContainer {
"auth-rpcgss-module.service" = {
overrideStrategy = "asDropinIfExists";
text = lib.mkForce ''
[Unit]
ConditionPathExists=
ConditionPathExists=/etc/krb5.keytab
ConditionVirtualization=!container
'';
};
# rpc-gssd also has ConditionPathExists from the NixOS IPA module (and an
# X-Restart-Triggers store path from systemd.nix). Use mkForce to win;
# omit X-Restart-Triggers since this service is skipped in containers anyway.
"rpc-gssd.service" = {
overrideStrategy = "asDropinIfExists";
text = lib.mkForce ''
[Unit]
ConditionPathExists=
ConditionPathExists=/etc/krb5.keytab
ConditionVirtualization=!container
'';
};
};
# home-manager-<user>.service fails on first enrollment because /home/wayne
# doesn't exist until the user's first login (pam_mkhomedir creates it then).
# ConditionPathExists makes systemd skip the service (exit 0, condition not
# met) instead of failing. After first login the dir exists and subsequent
# rebuilds activate HM normally.
services."home-manager-${vars.ipaUser}".unitConfig.ConditionPathExists =
"/home/${vars.ipaUser}";
};
services.openssh.extraConfig = '' services.openssh.extraConfig = ''
AuthorizedKeysCommand /usr/local/bin/sss_ssh_authorizedkeys %u AuthorizedKeysCommand /usr/local/bin/sss_ssh_authorizedkeys %u
AuthorizedKeysCommandUser nobody AuthorizedKeysCommandUser nobody
''; '';
# Create the home directory on first login if it doesn't exist yet.
# IPA users have no pre-created home on the host; without this sshd
# opens a session to a non-existent directory and resets the connection.
security.pam.services.sshd.makeHomeDir = true;
# Host keytab: pre-provisioned on the IPA server, sops-encrypted binary. # Host keytab: pre-provisioned on the IPA server, sops-encrypted binary.
# Placed at /etc/krb5.keytab before SSSD starts so the host authenticates # Placed at /etc/krb5.keytab before SSSD starts so the host authenticates
# to IPA without running ipa-client-install. # to IPA without running ipa-client-install.
sops.secrets."ipa-host-keytab" = { sops.secrets."ipa-host-keytab" = {
sopsFile = keytabSopsFile; sopsFile = keytabPath;
format = "binary"; format = "binary";
path = "/etc/krb5.keytab"; path = "/etc/krb5.keytab";
owner = "root"; owner = "root";
@@ -100,4 +166,45 @@ in
mode = "0600"; mode = "0600";
restartUnits = [ "sssd.service" ]; restartUnits = [ "sssd.service" ];
}; };
# NixOS requires isNormalUser/isSystemUser + group on any entry in
# users.users. HM with useUserPackages = true (set in flake.nix) adds a stub
# entry for each HM user so it can install packages to
# /etc/profiles/per-user/<name>/. This definition satisfies those assertions.
# With security.ipa setting "passwd: sss files" in nsswitch, SSSD's IPA entry
# takes priority for NSS lookups — this local stub is only a fallback when
# SSSD is unreachable (at which point auth fails anyway).
users.users.${vars.ipaUser} = {
isNormalUser = true;
group = "users";
extraGroups = [ "wheel" ];
createHome = false;
# "!" is not a password hash — it is the standard "account locked" marker.
# It cannot authenticate anyone locally. It exists solely so NixOS generates
# a shadow entry for this stub user; without one pam_unix returns
# PAM_AUTHINFO_UNAVAIL before prompting, which means PAM_AUTHTOK is never
# set and the subsequent pam_sss use_first_pass call has nothing to work
# with — blocking LightDM and su logins even when IPA/SSSD auth succeeds.
hashedPassword = "!";
};
# Home Manager config for the IPA primary user, applied on every enrolled
# host. Manages what IPA doesn't: dotfiles, user-scoped packages, session
# variables. Switch-nix/Test-nix/buildImage are system-wide (configuration.nix)
# so they don't need to be repeated here.
#
# homeDirectory uses mkForce because HM's NixOS integration module sets it to
# "/var/empty" for users not found in config.users.users at eval time (SSSD
# users aren't visible there).
home-manager.users.${vars.ipaUser} = { pkgs, ... }: {
home = {
username = vars.ipaUser;
homeDirectory = lib.mkForce "/home/${vars.ipaUser}";
stateVersion = "26.05";
packages = with pkgs; [ tmux sshfs ];
sessionVariables.EDITOR = "nano";
};
programs.home-manager.enable = true;
programs.bash.enable = true;
};
} }
+1 -43
View File
@@ -52,6 +52,7 @@ in
# LXC container does). # LXC container does).
imports = [ imports = [
(modulesPath + "/virtualisation/proxmox-lxc.nix") (modulesPath + "/virtualisation/proxmox-lxc.nix")
../common/preserve-ssh-host-key.nix
]; ];
proxmoxLXC = { proxmoxLXC = {
@@ -105,49 +106,6 @@ in
}; };
}; };
# NixOS's etc activation removes any /etc file that was in the previous
# generation's environment.etc but is absent from the current one — even
# real (non-symlink) copies. On every routine nixos-rebuild switch/test that
# lacks NIXOS_HOST_KEYS_DIR the key is absent from environment.etc, so it
# gets removed as "obsolete". sops-nix derives its age decryption key from
# /etc/ssh/ssh_host_ed25519_key; deletion cascades into every sops secret
# failing with "Error getting data key: 0 successful groups required, got 0".
#
# Fix: activation scripts that bracket the etc step, with explicit deps
# to enforce the correct ordering. Without deps the topological sort places
# preserveSshHostKey AFTER etc (confirmed live on a deployed lxc-tor-relay:
# position 7 vs etc's position 5) -- the key is already gone by the time it
# tries to save it. The etc/setupSecrets entries ADD to existing deps
# (types.listOf concatenates across module definitions).
system.activationScripts = {
# Saves the live key to /run before etc can delete it.
preserveSshHostKey = ''
if [ -f /etc/ssh/ssh_host_ed25519_key ]; then
cp /etc/ssh/ssh_host_ed25519_key /run/sshd-host-key-preserve.tmp
cp /etc/ssh/ssh_host_ed25519_key.pub /run/sshd-host-key-preserve.pub.tmp
fi
'';
# Reinstalls the key after etc runs if it was removed as "obsolete".
# The resulting file is not registered in environment.etc for either
# generation, so subsequent rebuilds leave it alone permanently.
restoreSshHostKey = {
deps = [ "etc" ];
text = ''
if [ ! -f /etc/ssh/ssh_host_ed25519_key ] && [ -f /run/sshd-host-key-preserve.tmp ]; then
install -m 0600 /run/sshd-host-key-preserve.tmp /etc/ssh/ssh_host_ed25519_key
install -m 0644 /run/sshd-host-key-preserve.pub.tmp /etc/ssh/ssh_host_ed25519_key.pub
fi
rm -f /run/sshd-host-key-preserve.tmp /run/sshd-host-key-preserve.pub.tmp
'';
};
# Force etc to wait until the key is saved, and sops to wait until the
# key is restored. Without these the topological sort breaks the chain.
etc = { deps = [ "preserveSshHostKey" ]; };
setupSecrets = { deps = [ "restoreSshHostKey" ]; };
};
# virtualisation/proxmox-lxc.nix (imported above) registers the Nix # virtualisation/proxmox-lxc.nix (imported above) registers the Nix
# store DB via a systemd service (register-nix-paths) -- it never runs # store DB via a systemd service (register-nix-paths) -- it never runs
# an activation script at all. Confirmed live this means neither # an activation script at all. Confirmed live this means neither
+1 -32
View File
@@ -34,6 +34,7 @@ in
../hardware-configuration/vm/proxmox.nix ../hardware-configuration/vm/proxmox.nix
../boot/efi.nix ../boot/efi.nix
../disko/proxmox.nix ../disko/proxmox.nix
../common/preserve-ssh-host-key.nix
]; ];
environment.etc = lib.mkIf hasKeyForThisTarget { environment.etc = lib.mkIf hasKeyForThisTarget {
@@ -46,36 +47,4 @@ in
mode = "0644"; mode = "0644";
}; };
}; };
# NixOS's etc activation removes any /etc file that was in the previous
# generation's environment.etc but is absent from the current one. Since
# the SSH key is only in environment.etc during the --impure build (when
# NIXOS_HOST_KEYS_DIR is set), normal rebuilds would remove it as
# "obsolete". These scripts mirror lxc.nix's approach: save the live key
# before etc runs, restore it after. Without the explicit deps, the
# topological sort places preserveSshHostKey after etc (confirmed live on
# lxc-tor-relay: position 7 vs etc's position 5), so the key is gone
# before it can be saved.
system.activationScripts = {
preserveSshHostKey = ''
if [ -f /etc/ssh/ssh_host_ed25519_key ]; then
cp /etc/ssh/ssh_host_ed25519_key /run/sshd-host-key-preserve.tmp
cp /etc/ssh/ssh_host_ed25519_key.pub /run/sshd-host-key-preserve.pub.tmp
fi
'';
restoreSshHostKey = {
deps = [ "etc" ];
text = ''
if [ ! -f /etc/ssh/ssh_host_ed25519_key ] && [ -f /run/sshd-host-key-preserve.tmp ]; then
install -m 0600 /run/sshd-host-key-preserve.tmp /etc/ssh/ssh_host_ed25519_key
install -m 0644 /run/sshd-host-key-preserve.pub.tmp /etc/ssh/ssh_host_ed25519_key.pub
fi
rm -f /run/sshd-host-key-preserve.tmp /run/sshd-host-key-preserve.pub.tmp
'';
};
etc = { deps = [ "preserveSshHostKey" ]; };
setupSecrets = { deps = [ "restoreSshHostKey" ]; };
};
} }
+8
View File
@@ -19,6 +19,14 @@
# tailnet-specific subdomain (vars.tailnetDomain) instead. # tailnet-specific subdomain (vars.tailnetDomain) instead.
services.dnsmasq = { services.dnsmasq = {
enable = true; enable = true;
# NixOS's dnsmasq module defaults resolveLocalQueries to true, which adds
# 127.0.0.1 to networking.nameservers and makes dnsmasq bind to
# listen-address=127.0.0.1. This instance is not the host's local
# resolver — it only serves IPA's conditional forwarder for tailnet names.
# The host uses domainControllerIp directly (networking.nameservers in
# host.nix). Without this, all host DNS goes through dnsmasq, which has
# no upstream for general queries (no-resolv=true), breaking resolution.
resolveLocalQueries = false;
settings = { settings = {
# Listen only on the LAN interface — not tailscale0 or loopback. # Listen only on the LAN interface — not tailscale0 or loopback.
# bind-interfaces prevents dnsmasq from binding to 0.0.0.0 and # bind-interfaces prevents dnsmasq from binding to 0.0.0.0 and
@@ -81,6 +81,14 @@ if [[ -z "${TARGET}" ]]; then
usage 1 usage 1
fi fi
# Reject FQDNs passed by mistake — the script appends HOME_DOMAIN itself.
# "nixos.sweet.home" → FQDN would become "nixos.sweet.home.sweet.home".
if [[ "${TARGET}" == *"."* ]]; then
echo "Error: <hostname> must be the short name (e.g. 'nixos'), not a FQDN." >&2
echo " The FQDN is derived automatically as ${TARGET}.${HOME_DOMAIN}." >&2
exit 1
fi
FQDN="${TARGET}.${HOME_DOMAIN}" FQDN="${TARGET}.${HOME_DOMAIN}"
KEYTAB_SECRET="${REPO_ROOT}/secrets/${TARGET}.keytab" KEYTAB_SECRET="${REPO_ROOT}/secrets/${TARGET}.keytab"
# Temp path on the domain controller — use a name that won't collide. # Temp path on the domain controller — use a name that won't collide.
+26
View File
@@ -0,0 +1,26 @@
{
"data": "ENC[AES256_GCM,data://9IEHIVCfHjyMNao5sCu2zNlZ/CaW+JyxVpGpD/vab2qvURunCUY7eMfSOyvOx/2WPXnWWlkoVJPCR1ec/yUg09EaSMfxrvqlu4UJI3Sxvu9xNuDszMwMMD/sCulJDiMWFNLp8qaYt7UGzexp4+GlGiqWDxk3ZEu/iLmSApzBrpciTF0lfehT4qblDovo9QXG2KDWFhCt2SwEKmHJ61Yl3pVAQnPLyTWaNhwWD/mYL76mIiDVKq7DJlvi9MBxzi3aYh/ttuHgRCvnCL0C9oUvOyT2cljwra0LXuOrum7FhPIXXboA7WTEbTHJm1LB5yLfxDrnWCrGxQzFQAwNixVHIcjuvjjvA/LifTvbj5FYM8x7an+DwXPfPhruFrDew1paAWsEGNNYXSmAlju2QLI/OwLHFFLuDyLnBKQ6RLtZbCEAOUKf2h4iZj7nH86eb/aGU=,iv:rj76+MJBCpiYyx2Ogut5UxJj3Gn+bygvu2mtuY5hFLA=,tag:yQmTvWVu8ZLug/7fo6RnwA==,type:str]",
"sops": {
"age": [
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBqcURBS2tIMGl1aWxLMHFQ\nS3ZGVTE0cnYzTmpnQ0daL1F3QnlpemRCMmtjClJiZzIrc2syN29sRXVoaXlPRUNF\nakw4RndmbEduTFg5ZVRKUTVwRWpGRjgKLS0tIHZ5ZFlyODlGWTJoNGpXR3RhY0ZH\nOGpPdDZQVmt6UWZXbHkxQTBoeW1JencKbsfH1V1lUj8mmHyLNj36VaRDgaBojcDU\ndoQWmSEXxjticJqdadbVKb3UABpvzAZxASCy81sa3wH0gT+7zLaNyQ==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBrbFdaMmRjcHgyV3Y0eWZL\neG1uMEtpQVUxQmNTU0Z3aC95Zi9uQlgvMEhRCmJiVlRTR2NocGlnbVU1UmlLVVA2\neERiMXpiQlVPNVhRU09XVGxrY0Ixa2sKLS0tIFRuOHdoelJxOXNRRHBJNnlhSE9j\nUUZHZmQzOVFwRmhFV3pvdnpRMTMraGcKRHBuSUpbHaEzH2tuSBE5MsLJDCuH3vUx\nO0jnDldCWkCw7Wvr/tQAkaDI8axZcYVDUkCEk+xqAdxDozLCPhEO6g==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age17e89ty6p0fw24daanen57wg8uald9s025t3wwxsw269svwpmgvrshfvfvt"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBZMW5taXh2QkJkT0JjaVpq\nQlBjVFpFYUhXTHhOT3prbFcvUFB0YnRGUzMwCjhHT01lY3dPWDE2dDZWZnJza1hN\nS1AvZWIvdjZoYmRjWlliK1hiOEdrT00KLS0tIDljWWY0NlQveS9VR2hOSUNyTUtH\nK2gvbEVibmZSdktPemdEQ2p5U0Y4d2MKKitoTi2vbxJ41IoWMlj4vO91Ahpj0hHP\nrKCPyx7ws/IUMmKGyvDLpZ3pYqHD9jl5pLfB05Hh4Emhv4lA1qtwwQ==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age17jqc66x9yeshfgd9v78mj483r4zzarqdtuxtrkxe4x5mw679gphshd94th"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA3K2dVV1BHbDk2Z3FhNmdV\nZEN2Um94K0pma1k4b1V5ZUJxQ1hWU1grZjJNCi9iRVVqOVpEMmtBUi80NThlYldY\nTUtZOVErT2VSWk43NndpVzBlL1lQaTgKLS0tIEpCM3Q4NjM3N1lpUE56N04rTXN0\nZkZ6TkV1TU9OV3dpc25RNWRpVnprM00KItUzKBdShakOfX8Sr+k906nsvYPl8QLb\nge//1GA+ukGsaS9rcChOY89vFdm61JDmj1jXSJ0CN4wLMW9/eblZRw==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1arhf2q45zw6wf2uevju4savp575x3m2tfvved5zzq3ay92ynua9s3cm92c"
}
],
"lastmodified": "2026-07-28T01:44:28Z",
"mac": "ENC[AES256_GCM,data:efFXIqbauOURR7lrVpK7kqRIPgYjgWfenBYoX7mUrQ/thFc+ApcAx58Fi1zg4biwIs7NarJAgDqAxZi+yKb2Sll8H/wlsEjWDU4iQlLJdIQw7wey9eDW8pgBLd+6E7FXrgn1Vh49dS5GXlC6clAYk1lCiB4NvfzPDy5Ktpl+Chs=,iv:+zCqj5I1MLJfRRiIrqgocYB49PZnlV45PUTH4gYlfrQ=,tag:WxY1sF4kFOTEzbSFcfJFbQ==,type:str]",
"version": "3.13.2"
}
}
+30
View File
@@ -0,0 +1,30 @@
{
"data": "ENC[AES256_GCM,data:apiijrtrqd77CTizITg0R35BfCi8PBnufpxIyC+hLYqwoBzP//3z/yjFyHPLG98m/c/qywoi3Kn+zsaTT7MjP++9OMhhX94YKlSHV1/cHB76OkwsNc+ClqWxl6vpaFX29Qvh3gFX9c/NR3xvYQutYwrIrQ9NR+t/M52IMC8hvtR1LQy0ak3VIuXJlSnG2r4kF2Ym1iP7phjuq39Gd245Axzw8OB7yGvOjNxSdTPxW/qL0fMlzNcMrjr9hw15WlqnZfWPOsB1+gZjHXpGfPD5BCbAAMoTRJd75vhKKXP/ERhIffewuuH2x/QHfSFvXVB3QyhBQMxd2b8QEEE5cjvcExOST3tkj6QARkzoUpRT7AE3jhl3XZ0uA2qu9SwyrSvbr0tBRKxCdK0g2E2/hqwcK/Tck5GB1eKb4aN+UkqxOblNDH+B1RfDoyNAuN+KEg==,iv:0p+ScrKpP4kQvO52gBAlwAis6oAzZ0EHFnU74hYPrn4=,tag:ON7qOjztF52xsJWAou7ogg==,type:str]",
"sops": {
"age": [
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBlYXB3cVAzb2xEZ2pGa1RJ\nbS9ZVTc4Ums5eUZJUjEvd1g1aGVyNUNramowCnptZXFOZVB3MFRFcUtzSXBEZk1B\neEtKcDdLS0h0b1h3VjRjRXRvV3V5V3MKLS0tIHBDemkyUnV6ZXhTeE5VOVVOMlky\nWWMzVGVzZlAxMjZYUGpQUCs5QmxiYkkKcuBshCgWX4TwfVlQ5lHikzvwWdLEXWD1\n/uSiy0J6yMSiu8u6cg2SxeFrlKJ3j47dDlT6WHCxS0PfeEA0bJb3LA==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBGa2VTc2NWdkFRNUJxelVR\nWFk4RWxoelYzNHo1UFVhU2ZkLzEySlRWN2xNCmNmcmJod2crL3NMRlVsSmpmVkU2\nMjlXMktjc3piUVNhUXlTdnVGTWJkUTQKLS0tIGQrMUxrNDlNTkRCSUtFWkxRdXgw\nRlV4ZmtYSGhPQU84eWtiQXVqTmxUK3cKk5fn72UZPH68t5ZappfAhZJwzpLkfKmT\ny9TbUPIr4Pbrexau6YiH43QIbDQFdwYPfkBjGkd57zCg8AVo1+MBRw==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1adur9g330gua4l6ndk8cqjg35qc8yxwgme6wrl2hpylcc7vxm38q05ejuy"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSArNWkwQXFWT1RpaDNvbzYy\nQWc1aHhmNHFEUXVsQjZqb0EzM0wrV0dwN1hnCjFsUFJiT3REK05uSGRWTEw2SFE4\nY1FleE1XVjhBbndiMmZxTWNTYmhYeVEKLS0tIEJiZzJvS3BsYzB3cHIxa2k5N1Ro\nenFFZDVaODNnVGdBZTBOYWJwRjQzc1kKlXJgee8wTSN4Beq4P0t9cYbk0BWHCseQ\nyaWpiPT9aZBEGLFmuEd3zKABc8lrilX/ySTmOG49vRg6CPmr7cT0Wg==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1rrxqea6q6pn39sw8y5te63h2py8jgjl9v0jyper86w3ggtn67upqg3ah39"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBEa0JYenFMNmNzWnVmcXdz\ndG90ZUZ0WWlIU0FCZG9OaWpBM3ZDWnFhZFhNCjhuV1FTOTJ2WVJGa2RuNVV2MjR0\naVNXa3diaWxWUlJtdkNOQXZ2R2NsQkUKLS0tIDcyYXh3N3B2QmNiK3dzemFFMGV1\nNTZpTk5yNGV5YVo3cGswK0NLWFQxQlEKIe0N5OxooWXzt1cUViBmjihmGEe3G6/f\nkz2/IscnG78ZvNgYKjdoG1jlsyje/3zI4C8aWXLq2DnIyxUyAhPgsQ==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age19mn8zrxl8zpps9yvrh4euquvygpp4fp8queg7xc6qhtnl4ng8c9qx02qwn"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSB2b0NVVm9QNm9waUUzcXBi\nWnZWU0JETjZRZmprZVRUL1h6ZHB4cXkrdm5rCm9GZ0VnTXB3S1BYSmlGWFJVcDhJ\naUl3RjR0ak9BRmQvVk1GRnQxNmtYM00KLS0tIFlTU1p2OHhWUGlOWngwbE56NEhF\nRW5QSkVVUWZpdDZXWEIxZ1BkbzVwclEK2P25nBgf8255vaKW/+T97aNTecRgNjLu\nedIUiPdXbFATCe3v/YRo6sqzFwIsvM6Bl9yHh/SXo6Ftc7eWZZd8zQ==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1hrx8qj02fj2ea6d4g9vqhyj9hl7fppkjqfdx2l37py3h6pdkr95s8n8rvs"
}
],
"lastmodified": "2026-07-28T01:44:24Z",
"mac": "ENC[AES256_GCM,data:J0D8bEs5mHLraLS6TvYuCgfiNU1xKM2Yfb5Y0f/q/4wM4LzXufNzv3+SWDHumTe328U8UnNXLqjNHEKL0bZi0coxpU5hVM+BvPcmqD72vscETzbQ2hnU05sfW+XjfZhcN8/ke0bpLt7nP0crD5hsZv3esV1E2UWvzjEiYtWzFHY=,iv:lcmXYG2H469UKBYDndWKMO+GP0mSGLztenm+kBaUdYI=,tag:ujiXbLM9CUsuoFwQQWI84Q==,type:str]",
"version": "3.13.2"
}
}
+22
View File
@@ -0,0 +1,22 @@
{
"data": "ENC[AES256_GCM,data:Q++XWxg9tvY7ugT8+8FWCC5jgOfQ1+LYLsnqN0/WGxTf5XT2VmoXvszcE/ow2BUOBG3qBTXS3OHYFPwmj1GgaBHB8rpdXX6+LveSBE2gmx1VR+NUDTxy+0/DBq411MK9n/J9eIYcybdFIE11biFSAob9EgfxBF5roCDXIPDPyVCSe6LyhNvqYPnGQsfHCbejSewLTcRQEiguP9BX96CpMPIpmaB9fHN25t5RWCgMI7MtacrRxRsyKg44+2FZstXdZrp2Wv9u86BxqdAFqtZE8qpPeGdrdzluZx9jhnw0wZPzHdKg5wS7/UrLCb0UxIQiDxDMDuuBuLGkKXfAhb6SGZU41wWAWYk548iGRUaG+79BO4HhRZNObOFvfsjpMXEfcH/Vbv/wHVY4OpJUPe/ZWK4wpL9YrY4nT0t62HH7MirOy1uhwLE50h2+6dHKj6ur5G7thkSqgzVWXQ==,iv:zaRBwS+gfXLhH30havn6Q2+oPWuLV3qBfbOj00kewlQ=,tag:Vr5iEQ2u+9YNahryhgzwSw==,type:str]",
"sops": {
"age": [
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSArTGJnaVhleUtsWnlITE1s\nNmRCaW1QWTFNSG5LRFdmb1lzRlV5NWl3YTBNCmF6eUN6RkJBZzc0MmJJa0dKTW01\ncVh4K1VLR2lURUpKQXpxNGpQNnpSUlUKLS0tIFJONnJFWkNCR3pqalRsUW9POVBj\nQ0pFQ3ltKzBETTVXTW5sV1ppWTFJc1kKzxUboNZO+Nwn2eTWy11VP9w1pRswCHaJ\nE2dYU0oUOClVzc0oSuIJxraG6TPj1N4WGC24gS+UmpkmSuCiOeZBsw==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBDSmxNR1I3dUFKT0xUVG9h\nWkRIakNVeWRQOEN3blNRVjZlWHF4K2NRa0hBClRiOXlmTTJ4T2JTUEw2c1l0R2N2\nMnRwdDA5bEZlQWJRTm9vUmNKclBSU1EKLS0tIFcyeDFjbTZyVEVDUjN1VzU1VHly\nNWNDMW9rTXY2bHNWYVR0SmtMckovUzQKhTWr6yFVW9am3okCiIswwqR5+/p9OLmB\nWCgPtwoFaBt1RjUXPK4/eS4LlucR2K6V/mNMn4xVsnkIl193U9632g==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age16j42pdc5dr6wnj7xayhkqdj2rny9u68fcqejs50hqq42scssh4gsnrrnlt"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA2ME9CbmVGcENRWksyL0pW\nOEJyUGhpbGMwWlBhVXBSeXQ2MW1EWnFuR0E4CnMwU0pjdk1YMzF5ZEhTVFlBaHZq\nam94UWVGbjhZSEx6VHBmem9JRWgwYzAKLS0tIHFJZWRyRjRHNzhXdDJSYWN3bDlR\nYVp3eGJWWkh3Y09ZWElyclZQN1ZSVFkKjR32//EcFAdMjVlNgky5zvVkwXwEN68D\nrkTuHKjiO5aV7yAQGPkdNw0UM0oRGF0u4YF3oOUcZfSvnKgDeoi2Zw==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1ug787sgt6st6k82fgkrug2lzltw4qsukrrqqs3w27ewwqj8rg4hsxcmylz"
}
],
"lastmodified": "2026-07-28T00:27:46Z",
"mac": "ENC[AES256_GCM,data:AbJIHYcFpeanQsJ3x7RPL9Yjlg5BJgkepKax0fL9L/PpA03Antab93iUNG95Mp6k/duovp8Jm445lbuppDZq1dh9ij/deBa8GbzJ50wwEe9zMc3EwRKScpqZEhRPF7KlJsIjsHJyd8NkcI5ji49XkHb4Ae1//8zG5HpVgy+3b04=,iv:uxQCbMwMIfP5S1dbsvIx3F79YWEguxwox8T0YZvUBdc=,tag:3utjmBGDmPc8q4JjaXvCkA==,type:str]",
"version": "3.13.2"
}
}
+26
View File
@@ -0,0 +1,26 @@
{
"data": "ENC[AES256_GCM,data:aqlMnoVkGtH9z3fJRweeC0OYf7LGqJU2sWA9Q25dKK6NuNyJd4BvjPtpfeg/WhVtJsaOtcbwVm4WAhVK9FARE8g8j+vmq0f6BAU4s6mx0ZIhl+mP+/hIpt//LOdd+9YezelJxdpzUyZbdAngU99rsTluLRe2XmZ7Fquxd8yH/OHenSDY6dizp9+5jfEi8EU+EmuXvuWMPY59xnlnqYNPfSFxs43/pS402LzJoJ5H+cBPprddkUBVzy4cBQvMnrRFUSjnqp74ovZkfIWFqDWQ5YgSU2PjatBg18oulZ7wNRhQ6OLqj6gsu+xrMjNFwnp7rMlA3X//hIidxTkVcYITycXd8KzuMIaofUpnwoyT34fy6+H35/39iiEyG4LRTrOOKRDzXkY2rhJUxFSZ8GlhNhMd0RlkmLngVYrtjsswJ9meIwoAFLPYt7BC61PJf0TXdtk=,iv:mCA819J9LpAOj8QxFAkrHI9wFJIy8qVxv31D6IwWFnk=,tag:qqMtM0eyHbQEyl6ND/wf7g==,type:str]",
"sops": {
"age": [
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBOZVpRYmNMQ1E4ZlFXMDVq\nbW1FcnYzWTBHQmdhSjlsZUtZK3dzNUZjY1FvCkV4VXU4MTcwNVZoZUpVVS9JeHE5\nbGk3UzE3YmpZQ1JISHV0RHJqSG9ZNXcKLS0tIHhBdnIvMjJkeWlVRE9Fb0FhWjNX\nUjBVWDltK2w0akkwOTJaTGNSWWNrRXMKqZRNnHiXvn1QBoSGdABp7vOqNlsEN6Xr\nDp3NByXow6PuRuWvQXHzd+WC+ADkwNaaiT6TUrbZcd/Pl8Ges9kcZg==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA2VFBxc2ZMUFp0YkJhVFhW\nc0ZNbnJUcGtkT1VLR2YrVGhRRFVTZFlyZXlJCmVnblNBNGxIdHh4Q0IweWR1b0dq\nRWFyOURuWkdkRE1RTnJRMEpXdk9HaUUKLS0tIFhKV3FoWW1zRk1pMlhuWWlhV2E5\nQzJTRHAyc0JtSjd2NHlJODZVbndaVDgKFA4565X/4FqNq/fZDZTg81/55hZi4c7b\nTti2AnyE3OcY/kurXJFHRinVMqURQf1fx9MxqUYRitiCz4qe5zFF+A==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1sweerhrga9yf8x6sv0apz4ed4g48rnlcq34rpv20t0rcelwgpgeqwvndzz"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSAwRWlKTFNocnBRN01pZ0hm\na3pyRUkxMWM3dE1iTkZZcGRYUFcyb1RDb2h3Ckt4blpGZHBjcnZ4SVE5UnF4cmY4\nWW0rZG5wUkZINVk5a2lmSzN2L3JJY1kKLS0tIExpWGlBRFZJVGpGbFhxRE5ZYjBo\nQVliTlFIZ1U5dE9xbDhHMUtxenpBSm8KY6sIFEfK8p+70IXsC4Jwb9Lm/pd9+V6K\n4JAzGrpA6mAuIwwSNnbdcA5j8FmBhCpK6nLBWmFhGm9Y+MRTaM7Jrw==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1nruncs4l0ufk7yuc4des8p99c0alfndl0lhsws8tycl5pplfp56s30af5f"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBoV0pIUXlyOFFTUHVTdllu\neG10VENOYWl5Wk0ycnpLUytTbnlrQ25pMkFRCnhyRU5xWW9vQXJJOHdFMGZqMkR1\nSktqT3lOdVVPRUN4YTlveGp0NXpqd0kKLS0tIGRaTktra0ZtSVpzSHBrY3VSSUph\nRVRZOSsxTTNmMmltMlJnVy9oT2VEWU0Krxf49B1BsrWn05fqg+cZ0k0PtfJJNfn0\nUL44RUWXWbK2igQHaIct9DfYe7DEonBJeROuxDYm8g7yNOv15S+P4Q==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1529taqdwr6t0w7cvzmty0d5y5593wffl0krt48j6uc4u39k56g2qf6ywtp"
}
],
"lastmodified": "2026-07-28T01:44:26Z",
"mac": "ENC[AES256_GCM,data:eyOSn03dzHSgkshPzLVwc95382eEFaDQarHs9l83dtcsb1Ui9CjkKipl2DVSUb6bdMUH1qKYmXqJhwFnAZbFZFjT4VTKtutNtM+OkhVXfT+fJs+1+u7k+ZUYFL9HuxKA6AWpwX3eJ8vmJDJZaAayJbm4PRzOyJywvKeneQqdUS0=,iv:QRKltR4qzVofo/Elt2Us/lrHlD7BenX605X31x+Ng78=,tag:SZ97CcfgMJeu3yqNk8Y/cA==,type:str]",
"version": "3.13.2"
}
}
+18
View File
@@ -0,0 +1,18 @@
{
"data": "ENC[AES256_GCM,data:QvViw/s1N7eIN3CoD27llEjriuSrohOou4Cv310nigcW8xMnA2SDN2id3H3AoKii1JlJ+qWpKn+gUmt5HOM0UlbeNe3os2RVwiX38O7eN9xFH9F5kA3TFs6Umqq3EoI586PwIVmB2LyxDnTeEEXVd7v5PFkBcfu7u8YIcNF7lpcj+6rOyHMB8uxPhrGep3yiKawFd9c9wWD0hlSSatV5tMHA1qmdK8VmDbCU/iuGwIoMzN1eZwGAXzG6LkCA63bUfdxU6yGuTboD+kN2Wbo+GZB0EACmiZoofl2wqlXuiw6qwTvlXkyauc9O5EG//PUkIECzDwiXcX+qSOM9DIBlZNth4ebhtic/PskyF09etL/gICz5YvV4ph5lyrWHq41KxljSU7QXOkGhzagruuMrYzhZb35wFH4Tie1ee2DXbGhreJr8V3Zse/zTMaD+iM57V8bvNcarTzOFXyKfp7Y=,iv:XBPhj2wT0k/yRCRHU4d+BQA/k00ZHWSKOucnZ5+PGys=,tag:Nh5MOxZIUXAYVZY5SZh/JA==,type:str]",
"sops": {
"age": [
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA0aUtETXlBMmRlTC9vK3NF\nRW4zS1FrSmo1dDN0OGN4SmV5ODd5MTRVejFJCnpPQkM2MVJ5WFlYRW1NVjduV1hv\nUWUzY0hHV05LV1BROVZVUlM2NldsTlEKLS0tIHFsTzI2SVZzYUtJWTM0MmFiUlVQ\neHEvUXgzc1pxSU1OZFo0cXhSZDdGUVEKpLVfzQEnntluUGsblnkHZJ9Jezu8tFte\nxEoV96GVHxUca6TFWpTLMqdR7NtuQGCkx295W3i1tkp58DP1OzRTUA==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA4ZW5ybVBvTkxibWJMWGRL\nZ1lnWEkxZ3l6d0FWbmxMY2VsTVlzOHJJM3owClNYd3BlQi9pL1lIdzJmekJUVEVi\ncWhSK3ZkZEMyeTNoZlpTT0NMUXZFWVEKLS0tIHVkVlhmQXdRQktTK3J5dXZ4aTNt\ncUw3WCt5dXJhTkdUbVpmeWoxWkoxNnMKj4XtdwmgFVOiVsIJs2Du7QJ09A9tv/Lf\nkFOq8y4tlZe0nCwRjq43sVz7hdCTdQ0rsaWjBGY90LLkJbOA+f+Wrw==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age16kqfmvz4e23hmdlqresnyw69ej604s320mmd49h4hm3fhqchtgyqrws0k2"
}
],
"lastmodified": "2026-07-28T01:44:30Z",
"mac": "ENC[AES256_GCM,data:zR2WLWX7NaHA15gi4kX0jDvzUIe9jtz5bMCAggbPW+IXOEedPrddAHZ8OfPErVMfx8O1pJKkAKSzoPTAbEle54FisSLMHXp8fI0297MByJrF9pOsMFpVcDy/L4Q+pBzmB7aS9r7+u7KRVVTZT3QwG1rFWZaDs5dFTP80RhtCbWQ=,iv:ZzPoO+h7ebS+jsSH7tWMx6QK8umpa2/HFQmx9dnJN+Y=,tag:vG9+ifxw4HaBE6YsmOwXcg==,type:str]",
"version": "3.13.2"
}
}
+12 -1
View File
@@ -16,7 +16,7 @@
serverIp = "192.168.2.226"; # server (NFS/ZFS) Proxmox VM LAN IP serverIp = "192.168.2.226"; # server (NFS/ZFS) Proxmox VM LAN IP
dockerIp = "192.168.2.225"; # docker Proxmox VM LAN IP dockerIp = "192.168.2.225"; # docker Proxmox VM LAN IP
pbsIp = "192.168.2.244"; # Proxmox Backup Server LAN IP (not NixOS-managed) pbsIp = "192.168.2.244"; # Proxmox Backup Server LAN IP (not NixOS-managed)
domainControllerIp = "192.168.2.253"; # FreeIPA domain controller / primary DNS (not NixOS-managed) domainControllerIp = "192.168.2.253"; # FreeIPA domain controller — authoritative DNS for sweet.home (not NixOS-managed)
ipaServer = "domain-controller.sweet.home"; # FreeIPA server hostname (used by security.ipa and Kerberos; must be a resolvable FQDN, not an IP) ipaServer = "domain-controller.sweet.home"; # FreeIPA server hostname (used by security.ipa and Kerberos; must be a resolvable FQDN, not an IP)
# Cross-host references (LAN hostnames/users other hosts reach over the network) # Cross-host references (LAN hostnames/users other hosts reach over the network)
@@ -80,6 +80,17 @@
# one-line change. # one-line change.
primaryUser = "nixos"; primaryUser = "nixos";
# Primary IPA/domain user. Home Manager is configured for this user on every
# IPA-enrolled host (see modules/ipa/client.nix) to manage the environment
# that IPA itself doesn't cover: dotfiles, user packages, session variables.
ipaUser = "wayne";
# GID of the IPA "docker-access" group (GID 50010 on the IPA server).
# The local "docker" group is pinned to this GID on every host that runs
# Docker so that IPA group membership alone grants docker socket access -
# no per-host users.groups.docker.members entry for the IPA user needed.
dockerAccessGid = 50010;
# HA file server cluster # HA file server cluster
# LAN IPs (vmbr0 / ens18) — client-facing: iSCSI initiators, NFS, management. # LAN IPs (vmbr0 / ens18) — client-facing: iSCSI initiators, NFS, management.
# Storage IPs (vmbr1 / ens19) — isolated internal bridge, used for DRBD # Storage IPs (vmbr1 / ens19) — isolated internal bridge, used for DRBD