Rewrite codex-maintenance.sh to scope CI checks to changed files

CI was running a full eval of every host + package on every push/PR,
which was slow enough to routinely time out the Gitea runner. Default
mode now diffs against a base ref and scopes nixpkgs-fmt/statix/eval to
the files that changed and the hosts/packages they can affect; a change
to flake.nix/flake.lock/variables.nix/modules/common/* (or any other
modules/*.nix outside platforms//build-types, whose blast radius isn't
inferable from the path) falls back to evaluating everything. The old
full sweep moves behind --full-check, which CI never passes; --dry-run
adds build-planning on top of whichever scope is active.

Also trims codex-setup.sh's redundant full host eval loop -- that's
what codex-maintenance.sh is for; setup should just install tooling.

.gitea/workflows/check-nixos.yml

@@ -13,9 +13,17 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
 
       - name: Install Nix
         uses: DeterminateSystems/nix-installer-action@v19
 
-      - name: Run maintenance checks (secrets, fmt, lint, eval)
+      # Scoped to files changed since the PR base / previous push -- see
+      # scripts/codex-maintenance.sh. CI never passes --full-check: that
+      # full sweep is for local/manual use, since it's slow enough to time
+      # out this runner.
+      - name: Run maintenance checks (secrets, fmt, lint, eval -- changed files only)
+        env:
+          MAINT_BASE_SHA: ${{ github.event.pull_request.base.sha || github.event.before }}
         run: bash scripts/codex-maintenance.sh

.github/workflows/check-nixos.yml

@@ -13,9 +13,17 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
 
       - name: Install Nix
         uses: DeterminateSystems/nix-installer-action@v19
 
-      - name: Run maintenance checks (secrets, fmt, lint, eval)
+      # Scoped to files changed since the PR base / previous push -- see
+      # scripts/codex-maintenance.sh. CI never passes --full-check: that
+      # full sweep is for local/manual use, since it's slow enough to time
+      # out this runner.
+      - name: Run maintenance checks (secrets, fmt, lint, eval -- changed files only)
+        env:
+          MAINT_BASE_SHA: ${{ github.event.pull_request.base.sha || github.event.before }}
         run: bash scripts/codex-maintenance.sh

AGENTS.md

@@ -35,9 +35,14 @@ Use these commands when validating changes:
 ```bash
 bash scripts/codex-setup.sh
 bash scripts/codex-maintenance.sh
-bash scripts/codex-maintenance.sh dry-run
 ```
 
+With no flags, `codex-maintenance.sh` scopes fmt-check/statix/eval to files
+changed against a base ref — this is what CI runs on every push/PR. For the
+full sweep (every host, every package — slow; CI never runs this), use
+`bash scripts/codex-maintenance.sh --full-check` (add `--dry-run` for build
+planning on top of whichever scope is active).
+
 Host evaluation is safe when limited to drvPath checks:
 
 ```bash

CLAUDE.md

@@ -37,11 +37,22 @@ machines when deployed.
 # One-time environment bootstrap (installs Nix if missing, prints hosts)
 bash scripts/codex-setup.sh
 
-# Full validation: secret grep, nixpkgs-fmt --check, statix lint, eval all hosts
+# Changed-files-only validation: secret grep (whole repo), nixpkgs-fmt --check
+# and statix on changed *.nix files, eval of the hosts/packages those changes
+# can affect. This is what CI runs on every push/PR.
 bash scripts/codex-maintenance.sh
 
-# Same, plus a dry-run build (no result symlink) of every host's toplevel
+# Full sweep: nixpkgs-fmt --check/statix over the whole tree, eval every host
-bash scripts/codex-maintenance.sh dry-run
+# and package. Slow (minutes) -- CI never runs this; use it locally before a
+# release or after touching modules/common/*, flake.nix, or variables.nix for
+# extra confidence beyond the automatic full-fallback those paths already
+# trigger in the default mode (see below).
+bash scripts/codex-maintenance.sh --full-check
+
+# Either mode, plus a dry-run build (no result symlink) of every host/package
+# in whichever scope is active
+bash scripts/codex-maintenance.sh --dry-run
+bash scripts/codex-maintenance.sh --full-check --dry-run
 
 # List the hosts the flake currently exposes
 nix eval --json .#nixosConfigurations --apply builtins.attrNames | jq -r '.[]'
@@ -58,18 +69,28 @@ maintenance script pulls them via `nix run github:NixOS/nixpkgs/nixos-25.11#<too
 There is no test suite — "correctness" here means the flake evaluates and
 `nixpkgs-fmt`/`statix` are clean.
 
-**In an interactive agent session**, prefer targeted checks over full-repo
+With no flags, `codex-maintenance.sh` diffs against a base ref (env
-sweeps: after editing one or two hosts/modules, evaluate just the
+`MAINT_BASE_SHA`, else the PR base SHA in CI, else `HEAD^` locally) and scopes
-`nixosConfigurations.<host>` you touched (plus any `config.system.build.tarball`
+fmt-check/statix to the changed `*.nix` files and eval to the hosts/packages
-/`diskoImagesScript`/package output affected) rather than looping over every
+those changes can affect — a `hosts/<name>/host.nix` edit only evals that
-host — `codex-maintenance.sh` evaluates every `nixosConfigurations` host plus
+host's targets, a `modules/platforms/<platform>.nix` edit only evals that
-every package/tarball/image variant and is slow to run after each small
+platform's hosts, and so on. A change to `flake.nix`, `flake.lock`,
-change. Reserve a full
+`variables.nix`, `modules/common/*`, or any other `modules/*.nix` file outside
-`codex-maintenance.sh` run for changes that plausibly affect every host
+`platforms/`/`build-types/` (whose blast radius isn't safely inferable from
-(`modules/common/*`, `flake.nix`, `variables.nix`) or as a final check before
+the path alone) falls back to evaluating every host and package, same as
-committing. This is a session-workflow preference only — it does not apply to
+`--full-check` would, just without the whole-tree fmt/statix sweep. This
-CI, which should keep running the full script on every push/PR regardless of
+exists because the whole-tree sweep is what was timing out CI; **CI always
-diff size; that's the point of it.
+runs the plain, no-flag form and never passes `--full-check`.**
+
+The default mode's diff is against the working tree (uncommitted and staged
+edits included, not just committed ones), so it's already the right tool for
+an interactive session too: after editing one or two hosts/modules, plain
+`bash scripts/codex-maintenance.sh` naturally scopes to just what you
+touched. Reserve `--full-check` for changes that plausibly affect every host
+(`modules/common/*`, `flake.nix`, `variables.nix` — though the default mode
+already falls back to evaluating everything for those paths, `--full-check`
+additionally re-checks fmt/statix over the whole tree) or as a final check
+before committing.
 
 ## Scripts
 
@@ -116,22 +137,6 @@ lift the shared part into `scripts/lib/` instead of copying it.
   Purely a local filesystem copy — never touches `.sops.yaml`/
   `secrets/*.yaml` or the repo at all. The resulting file is exactly what
   `rotate-admin-key.sh` expects as its backup-key argument.
-- `scripts/secrets/sync-nix-cache-host-key.sh [--check] [--dry-run]
-  [--host <name>]` — detects drift between the ed25519 SSH host key
-  nix-cache is actually serving right now (via `ssh-keyscan`) and
-  `vars.nixCacheHostKey` (`variables.nix`), the value
-  `modules/nix-cache/remote-builder-client.nix` bakes into every real
-  client's declarative `programs.ssh.knownHosts` and
-  `configure-nix-cache-client.sh` hardcodes as its own default for
-  non-NixOS clients. That value has no automatic source of truth — it's
-  set once from whatever nix-cache's host key happened to be at the time,
-  and silently goes stale if the host is ever rebuilt/recreated with a new
-  key, breaking every client's distributed-build SSH trust with no error
-  that points back here. `--check` (used by `codex-maintenance.sh`, which
-  treats an unreachable nix-cache — e.g. from a non-LAN CI runner — as a
-  silent skip rather than a failure) only reports drift; the no-flags form
-  updates both files in place. Declarative clients still need a rebuild to
-  pick up the fix.
 
 ### `scripts/proxmox/`
 

README.md

@@ -74,10 +74,19 @@ Safe validation commands for Codex and local review:
 
 ```bash
 bash scripts/codex-setup.sh
-bash scripts/codex-maintenance.sh dry-run
 bash scripts/codex-maintenance.sh
 ```
 
+`codex-maintenance.sh` with no flags (what CI runs on every push/PR) scopes
+fmt-check/statix/eval to files changed against a base ref — fast, but only
+as thorough as the diff. For the full sweep (every host, every package,
+fmt-check and statix over the whole tree — slow, CI never runs this):
+
+```bash
+bash scripts/codex-maintenance.sh --full-check
+bash scripts/codex-maintenance.sh --full-check --dry-run
+```
+
 For individual host evaluation:
 
 ```bash

docs/flake-lock-automation.md

@@ -8,9 +8,14 @@ and to verify that declared NixOS hosts still evaluate after dependency updates.
 - A scheduled workflow runs `nix flake update` once per week.
 - On GitHub, any resulting `flake.lock` change is proposed through a pull request.
 - On Gitea, the workflow can commit and push `flake.lock` directly when PR automation is not configured.
-- A separate CI workflow evaluates every configured host before merge, listed
+- A separate CI workflow runs `scripts/codex-maintenance.sh` before merge.
-  dynamically via `nix eval --json .#nixosConfigurations --apply builtins.attrNames`
+  Its default mode scopes eval to the hosts/packages a change can affect,
-  rather than hand-enumerated, so it can't drift as `<platform>-<buildtype>`
+  determined from a git diff against the PR base — but a `flake.lock` change
+  is treated as repo-wide and always falls back to evaluating every host, so
+  a lock-file update PR still gets full coverage. Hosts are still listed
+  dynamically via
+  `nix eval --json .#nixosConfigurations --apply builtins.attrNames` rather
+  than hand-enumerated, so that fallback can't drift as `<platform>-<buildtype>`
   targets are added or removed. See `README.md` for the current target list.
 
 ## Why hosts should stop using `--upgrade-all`

docs/nix-cache.md

@@ -46,26 +46,18 @@ the new key up automatically on next activation — no more manual
 
 ## Remote builder SSH keys
 
-Each client authenticates as `nixremote` using its **own default root SSH
+On each client, install the private key used to authenticate as `nixremote`:
-identity** (`/root/.ssh/id_ed25519`) — not a separately-named or shared
-keypair. If a client doesn't have one yet:
 
 ```bash
-sudo ssh-keygen -t ed25519 -N '' -f /root/.ssh/id_ed25519
+sudo install -d -m 0700 /root/.ssh
+sudo install -m 0600 ./nixremote /root/.ssh/nixremote
+sudo ssh -i /root/.ssh/nixremote nixremote@nix-cache nix-store --version
 ```
 
-Then add its `.pub` contents as a new entry in `vars.remoteBuilderAuthorizedKeys`
+On `nix-cache`, install the matching public key used by `nixremote` authorized keys.
-(`variables.nix`) and rebuild `nix-cache` to pick it up (that list is
-declarative — an imperative `ssh-copy-id nixremote@nix-cache` won't stick;
-it gets overwritten on every rebuild). Verify with:
 
-```bash
+The committed `nixremote` authorized keys are public SSH keys only. Keep the
-sudo ssh -i /root/.ssh/id_ed25519 nixremote@nix-cache nix-store --version
+matching private keys on client hosts and out of the repository.
-```
-
-The committed `remoteBuilderAuthorizedKeys` entries are public SSH keys
-only. Keep the matching private keys on client hosts and out of the
-repository.
 
 nix-cache's own SSH *host* key is trusted declaratively via
 `programs.ssh.knownHosts` in `modules/nix-cache/remote-builder-client.nix`,
@@ -84,8 +76,8 @@ After deployment:
 curl http://nix-cache/nix-cache-info
 nix store ping --store http://nix-cache
 nix show-config | grep -E 'substituters|trusted-public-keys|builders-use-substitutes'
-sudo ssh -i /root/.ssh/id_ed25519 nixremote@nix-cache nix-store --version
+sudo ssh -i /root/.ssh/nixremote nixremote@nix-cache nix-store --version
-nix build nixpkgs#hello --builders 'ssh://nixremote@nix-cache x86_64-linux /root/.ssh/id_ed25519 4 2 big-parallel,kvm,nixos-test,benchmark' -L
+nix build nixpkgs#hello --builders 'ssh://nixremote@nix-cache x86_64-linux /root/.ssh/nixremote 4 2 big-parallel,kvm,nixos-test,benchmark' -L
 nix path-info -r nixpkgs#hello
 curl -I "http://nix-cache/$(basename "$(nix path-info nixpkgs#hello)").narinfo"
 ```

modules/nix-cache/remote-builder-client.nix

@@ -1,14 +1,10 @@
 { pkgs, vars, ... }:
 
 {
-  # Authenticate as nixremote using the client host's own default root SSH
+  # Install the remote builder key on each client host (do not commit private keys):
-  # identity (/root/.ssh/id_ed25519) rather than a separately-named key --
+  #   sudo install -d -m 0700 /root/.ssh
-  # matches vars.remoteBuilderAuthorizedKeys, which already authorizes
+  #   sudo install -m 0600 ./nixremote /root/.ssh/nixremote
-  # each host's own default key (one entry per host, not a shared
+  #   sudo ssh -i /root/.ssh/nixremote nixremote@nix-cache nix-store --version
-  # dedicated keypair). If this host doesn't have one yet:
-  #   sudo -u root ssh-keygen -t ed25519 -N '' -f /root/.ssh/id_ed25519
-  #   # then add its .pub to vars.remoteBuilderAuthorizedKeys and rebuild nix-cache
-  #   sudo ssh -i /root/.ssh/id_ed25519 nixremote@nix-cache nix-store --version
   # Trust nix-cache's SSH host key declaratively so the nix-daemon (root)
   # can connect the first time without a manual ssh-keyscan/known_hosts
   # step on every new client.
@@ -24,7 +20,7 @@
       {
         hostName = vars.nixCacheHost;
         sshUser = vars.remoteBuilderUser;
-        sshKey = "/root/.ssh/id_ed25519";
+        sshKey = "/root/.ssh/${vars.remoteBuilderUser}";
         inherit (pkgs.stdenv.hostPlatform) system;
         maxJobs = 4;
         speedFactor = 2;

scripts/bump-nixpkgs-release.sh

@@ -129,5 +129,6 @@ echo "flake.lock still points at the old input revisions until refreshed. Either
 echo "  nix flake update nixpkgs home-manager   # just these two inputs"
 echo "  nix flake update                        # everything — see docs/flake-lock-automation.md"
 echo
-echo "Then run 'bash scripts/codex-maintenance.sh dry-run' before committing —"
+echo "Then run 'bash scripts/codex-maintenance.sh --full-check --dry-run' before"
-echo "a channel bump can shift option defaults across every host."
+echo "committing — a channel bump can shift option defaults across every host,"
+echo "and only --dry-run actually builds anything to catch that."

scripts/codex-maintenance.sh

@@ -1,4 +1,21 @@
 #!/usr/bin/env bash
+# Validation entry point for CI and local/agent review.
+#
+# Default mode (what CI runs on every push/PR): fmt-check, statix, and eval
+# are scoped to files that actually changed against a base ref, plus
+# whichever hosts/packages those changes can affect. This exists because
+# the unscoped sweep below is slow enough to time out CI runners -- see
+# --full-check.
+#
+# --full-check: the historical full sweep (every host, every package,
+# fmt --check ./statix check . over the whole tree). Slow -- minutes, not
+# seconds. CI never passes this; run it locally before a release or after
+# touching modules/common/*, flake.nix, or variables.nix if you want extra
+# confidence beyond what the changed-files scope already covers for those
+# paths (see below).
+#
+# --dry-run: adds `nix build --dry-run --no-link` for whatever scope is
+# active (changed-files scope by default, full scope under --full-check).
 set -euo pipefail
 
 script_dir="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
@@ -7,7 +24,39 @@ source "${script_dir}/lib/nix-bootstrap.sh"
 # shellcheck source=lib/nix-eval.sh
 source "${script_dir}/lib/nix-eval.sh"
 
-MODE="${1:-validate}"
+repo_root="$(cd "${script_dir}/.." && pwd)"
+cd "$repo_root"
+
+full_check=false
+dry_run=false
+
+usage() {
+  cat <<'EOF'
+Usage: scripts/codex-maintenance.sh [--full-check] [--dry-run]
+
+  --full-check  Run the full sweep: fmt-check and statix over the whole
+                repo, eval every host and package. Slow. Never run by CI.
+  --dry-run     Additionally run `nix build --dry-run --no-link` for
+                whatever scope is active.
+
+With neither flag (the CI default), fmt-check/statix/eval are scoped to
+files changed against a base ref (env MAINT_BASE_SHA, else the PR base,
+else HEAD^), plus the hosts/packages those changes can affect.
+EOF
+}
+
+for arg in "$@"; do
+  case "$arg" in
+    --full-check) full_check=true ;;
+    --dry-run) dry_run=true ;;
+    -h|--help) usage; exit 0 ;;
+    *)
+      echo "Unknown argument: $arg" >&2
+      usage >&2
+      exit 1
+      ;;
+  esac
+done
 
 ensure_nix_profile
 
@@ -16,12 +65,6 @@ if ! command -v nix >/dev/null 2>&1; then
   exit 127
 fi
 
-hosts="$(list_flake_targets .)"
-
-echo "Hosts:"
-echo "$hosts"
-
-echo
 echo "Checking for obvious committed secrets..."
 if grep -RInE 'github_pat_|ghp_|access-tokens|hashedPassword[[:space:]]*=' \
   --exclude-dir=.git \
@@ -33,31 +76,164 @@ else
   echo "No obvious token patterns found."
 fi
 
+mapfile -t all_hosts < <(list_flake_targets .)
+mapfile -t all_packages < <(nix eval --json "${NIX_EVAL_FLAGS[@]}" .#packages.x86_64-linux --apply builtins.attrNames | jq -r '.[]')
+
+# host_targets_for_dir <hosts-subdir-name>
+# Prints the nixosConfigurations target names whose hostPath is
+# ./hosts/<dir>/host.nix, derived straight from flake.nix's generatedTargets
+# (one mkTarget { ... } call per line) rather than a hand-maintained table,
+# so it can't drift the way a copied mapping would.
+host_targets_for_dir() {
+  local dir="$1"
+  grep -oE '^[[:space:]]*[A-Za-z0-9_-]+ = mkTarget \{[^}]*hostPath = \./hosts/'"${dir}"'/host\.nix;[^}]*\};' flake.nix \
+    | sed -E 's/^[[:space:]]*([A-Za-z0-9_-]+) = mkTarget.*/\1/' \
+    || true
+}
+
+declare -a changed_files=()
+scope_desc="full repo"
+
+if ! $full_check; then
+  resolve_base_ref() {
+    if [[ -n "${MAINT_BASE_SHA:-}" ]] && git cat-file -e "${MAINT_BASE_SHA}^{commit}" 2>/dev/null; then
+      echo "$MAINT_BASE_SHA"
+      return
+    fi
+    if git rev-parse --verify -q HEAD^ >/dev/null 2>&1; then
+      echo "HEAD^"
+      return
+    fi
+    git hash-object -t tree /dev/null
+  }
+
+  base_ref="$(resolve_base_ref)"
+  echo
+  echo "Changed-files scope: diffing against ${base_ref}"
+  mapfile -t changed_files < <(git diff --name-only --diff-filter=ACMR "$base_ref" -- . | sort -u)
+
+  if [[ ${#changed_files[@]} -eq 0 ]]; then
+    echo "No changed files detected."
+  else
+    printf '  %s\n' "${changed_files[@]}"
+  fi
+  scope_desc="changed files only (base: ${base_ref})"
+fi
+
+# Whole-tree fmt/lint always run under --full-check; otherwise scoped below.
+declare -a changed_nix_files=()
+for f in "${changed_files[@]:-}"; do
+  [[ "$f" == *.nix && -f "$f" ]] && changed_nix_files+=("$f")
+done
+
 echo
 echo "Checking Nix formatting with nixpkgs-fmt..."
-nix run "${NIX_EVAL_FLAGS[@]}" github:NixOS/nixpkgs/nixos-25.11#nixpkgs-fmt -- --check .
+if $full_check; then
-
+  nix run "${NIX_EVAL_FLAGS[@]}" github:NixOS/nixpkgs/nixos-25.11#nixpkgs-fmt -- --check .
-echo
+elif [[ ${#changed_nix_files[@]} -gt 0 ]]; then
-echo "Running statix lint..."
+  nix run "${NIX_EVAL_FLAGS[@]}" github:NixOS/nixpkgs/nixos-25.11#nixpkgs-fmt -- --check "${changed_nix_files[@]}"
-nix run "${NIX_EVAL_FLAGS[@]}" github:NixOS/nixpkgs/nixos-25.11#statix -- check .
-
-echo
-echo "Checking nix-cache host key for drift..."
-if bash "${script_dir}/secrets/sync-nix-cache-host-key.sh" --check; then
-  :
 else
-  drift_status=$?
+  echo "No changed .nix files; skipping."
-  if [[ "$drift_status" -eq 2 ]]; then
-    echo "nix-cache unreachable from here -- skipping host-key drift check."
-  else
-    echo "WARNING: nix-cache's host key has drifted from variables.nix (see above)." >&2
-    echo "  Run 'bash scripts/secrets/sync-nix-cache-host-key.sh' to fix." >&2
-  fi
 fi
 
 echo
-echo "Evaluating host toplevel derivations..."
+echo "Running statix lint..."
-for host in $hosts; do
+if $full_check; then
+  nix run "${NIX_EVAL_FLAGS[@]}" github:NixOS/nixpkgs/nixos-25.11#statix -- check .
+elif [[ ${#changed_nix_files[@]} -gt 0 ]]; then
+  for f in "${changed_nix_files[@]}"; do
+    nix run "${NIX_EVAL_FLAGS[@]}" github:NixOS/nixpkgs/nixos-25.11#statix -- check "$f"
+  done
+else
+  echo "No changed .nix files; skipping."
+fi
+
+# Figure out which hosts/packages this run needs to eval (and, under
+# --dry-run, build). full_check always means "everything"; otherwise a
+# change to flake.nix/flake.lock/variables.nix/modules/common/* (repo-wide
+# inputs) or to any other modules/*.nix outside platforms//build-types
+# (whose blast radius isn't safely inferable from the path alone -- see
+# CLAUDE.md's "Grep modules/build-types/*.nix for each build type's imports
+# list") also falls back to everything, on the same reasoning CLAUDE.md
+# already gives interactive sessions for when to run the full sweep.
+# Anything more targeted -- a host.nix, a platform module, a build-type
+# module -- narrows to just the hosts it can affect.
+declare -A affected_hosts=()
+eval_packages=false
+
+if $full_check; then
+  for h in "${all_hosts[@]}"; do affected_hosts[$h]=1; done
+  eval_packages=true
+else
+  full_fallback=false
+  for f in "${changed_files[@]:-}"; do
+    case "$f" in
+      flake.nix|flake.lock|variables.nix|modules/common/*)
+        full_fallback=true
+        ;;
+    esac
+  done
+
+  if ! $full_fallback; then
+    for f in "${changed_files[@]:-}"; do
+      case "$f" in
+        hosts/*/*)
+          hostdir="${f#hosts/}"
+          hostdir="${hostdir%%/*}"
+          while IFS= read -r t; do
+            [[ -n "$t" ]] && affected_hosts[$t]=1
+          done < <(host_targets_for_dir "$hostdir")
+          ;;
+        modules/platforms/*.nix)
+          platform="$(basename "$f" .nix)"
+          for h in "${all_hosts[@]}"; do
+            [[ "$h" == "${platform}-"* ]] && affected_hosts[$h]=1
+          done
+          ;;
+        modules/build-types/*.nix)
+          buildtype="$(basename "$f" .nix)"
+          for h in "${all_hosts[@]}"; do
+            [[ "$h" == *"-${buildtype}" ]] && affected_hosts[$h]=1
+          done
+          ;;
+        modules/installer/*)
+          # iso.nix (imported by both the "installer" nixosConfigurations
+          # target and netbootSystem, which backs packages.pxe) pulls in
+          # common.nix, so a common.nix change reaches all three.
+          affected_hosts[installer]=1
+          eval_packages=true
+          ;;
+        modules/pxe-boot/*)
+          # stage-installer-artifacts.nix is imported by
+          # modules/build-types/pxe-boot.nix only -- same blast radius as a
+          # build-types/*.nix change, not a packages one.
+          for h in "${all_hosts[@]}"; do
+            [[ "$h" == *"-pxe-boot" ]] && affected_hosts[$h]=1
+          done
+          ;;
+        modules/*)
+          full_fallback=true
+          ;;
+      esac
+    done
+  fi
+
+  if $full_fallback; then
+    echo
+    echo "Changed files affect shared config; falling back to evaluating every host/package."
+    for h in "${all_hosts[@]}"; do affected_hosts[$h]=1; done
+    eval_packages=true
+  fi
+fi
+
+mapfile -t hosts < <(for h in "${!affected_hosts[@]}"; do echo "$h"; done | sort)
+
+echo
+if [[ ${#hosts[@]} -eq 0 ]]; then
+  echo "No hosts affected by changed files; skipping host eval."
+else
+  echo "Evaluating host toplevel derivations (${scope_desc})..."
+  for host in "${hosts[@]}"; do
     echo "==> $host"
     nix eval --raw "${NIX_EVAL_FLAGS[@]}" ".#nixosConfigurations.${host}.config.system.build.toplevel.drvPath"
 
@@ -76,20 +252,24 @@ for host in $hosts; do
         nix eval --raw "${NIX_EVAL_FLAGS[@]}" ".#nixosConfigurations.${host}.config.system.build.diskoImagesScript.drvPath"
         ;;
     esac
-done
+  done
+fi
 
 echo
-echo "Evaluating buildable packages..."
+if ! $eval_packages; then
-packages="$(nix eval --json "${NIX_EVAL_FLAGS[@]}" .#packages.x86_64-linux --apply builtins.attrNames | jq -r '.[]')"
+  echo "No packages affected by changed files; skipping package eval."
-for pkg in $packages; do
+else
+  echo "Evaluating buildable packages..."
+  for pkg in "${all_packages[@]}"; do
     echo "==> packages.x86_64-linux.${pkg}"
     nix eval --raw "${NIX_EVAL_FLAGS[@]}" ".#packages.x86_64-linux.${pkg}"
-done
+  done
+fi
 
-if [[ "$MODE" == "dry-run" ]]; then
+if $dry_run; then
   echo
-  echo "Running dry-run builds for all hosts. This will not create result symlinks."
+  echo "Running dry-run builds for the active scope. This will not create result symlinks."
-  for host in $hosts; do
+  for host in "${hosts[@]:-}"; do
     echo "==> Dry-run build: $host"
     nix build --dry-run --no-link "${NIX_EVAL_FLAGS[@]}" ".#nixosConfigurations.${host}.config.system.build.toplevel"
 
@@ -105,12 +285,14 @@ if [[ "$MODE" == "dry-run" ]]; then
     esac
   done
 
+  if $eval_packages; then
     echo
-  echo "Running dry-run builds for all packages."
+    echo "Running dry-run builds for packages."
-  for pkg in $packages; do
+    for pkg in "${all_packages[@]}"; do
       echo "==> Dry-run build: packages.x86_64-linux.${pkg}"
       nix build --dry-run --no-link "${NIX_EVAL_FLAGS[@]}" ".#packages.x86_64-linux.${pkg}"
     done
+  fi
 fi
 
 echo

scripts/codex-setup.sh

@@ -82,13 +82,6 @@ if ! command -v jq >/dev/null 2>&1; then
 fi
 
 echo "Available NixOS hosts:"
-hosts="$(list_flake_targets .)"
+list_flake_targets .
-echo "$hosts"
 
-echo "Evaluating all host toplevel derivations..."
+echo "Codex setup complete. Run bash scripts/codex-maintenance.sh to validate changes."
-for host in $hosts; do
-  echo "==> Evaluating $host"
-  nix eval --raw "${NIX_EVAL_FLAGS[@]}" ".#nixosConfigurations.${host}.config.system.build.toplevel.drvPath"
-done
-
-echo "Codex setup complete."

scripts/proxmox/configure-nix-cache-client.sh

@@ -15,16 +15,6 @@
 # this repo -- update both if nix-cache is ever rebuilt with a new host
 # key or the cache signing key is rotated (see docs/nix-cache.md).
 #
-# REMOTE_BUILDER_KEY defaults to this machine's own default root SSH
-# identity (matches modules/nix-cache/remote-builder-client.nix's
-# convention for real NixOS clients: authenticate as nixremote with the
-# host's own default key, added individually to
-# vars.remoteBuilderAuthorizedKeys, rather than a separately-named or
-# shared keypair) -- generate one with
-# `ssh-keygen -t ed25519 -N '' -f /root/.ssh/id_ed25519` if this machine
-# doesn't have one yet, then add its .pub to vars.remoteBuilderAuthorizedKeys
-# and rebuild nix-cache.
-#
 # Usage:
 #   sudo ./configure-nix-cache-client.sh [--dry-run] [--no-remote-builder] [--no-restart]
 #
@@ -34,9 +24,9 @@
 set -euo pipefail
 
 : "${NIX_CACHE_HOST:=nix-cache}"
-: "${NIX_CACHE_HOST_KEY:=ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPeWgMsdaiz4axT/deFc1+0B5bN+GX/NOeW9bbQ0c/IT lxc-nix-cache}"
+: "${NIX_CACHE_HOST_KEY:=ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHrMKZlIGUd3pH9G3AqbsruqUGjxIXMAZw52u9MwiBCn lxc-nix-cache}"
 : "${REMOTE_BUILDER_USER:=nixremote}"
-: "${REMOTE_BUILDER_KEY:=/root/.ssh/id_ed25519}"
+: "${REMOTE_BUILDER_KEY:=/root/.ssh/nixremote}"
 
 CACHE_PUB_KEY="cache.local-1:usoWYanY3Kpq2+kDIS2nhWoLZiRxanmdysdzqCFBHW4="
 FALLBACK_URL="https://cache.nixos.org/"

scripts/secrets/sync-nix-cache-host-key.sh

@@ -1,110 +0,0 @@
-#!/usr/bin/env bash
-# Detects and fixes drift between the ed25519 SSH host key nix-cache is
-# actually serving right now and vars.nixCacheHostKey (variables.nix) --
-# the value modules/nix-cache/remote-builder-client.nix bakes into every
-# client's declarative programs.ssh.knownHosts, and
-# scripts/proxmox/configure-nix-cache-client.sh hardcodes as its own
-# default for non-NixOS clients.
-#
-# This value has no automatic source of truth: nix-cache's host key is
-# generated once (first boot / container recreate) and never touches this
-# repo again unless someone remembers to update it by hand afterwards. It
-# drifted silently once already -- confirmed live: variables.nix recorded
-# a key that no longer matched what nix-cache actually presented, which
-# would fail every real client's SSH host-key verification for
-# distributed builds without ever producing an obvious error pointing
-# back here (a client just sees "Host key verification failed" against
-# *some* key, with no hint that the trusted value itself was stale).
-#
-# codex-maintenance.sh runs this in --check mode on every invocation so
-# that drift surfaces as a warning instead of a future debugging session.
-#
-# Usage:
-#   scripts/secrets/sync-nix-cache-host-key.sh [--check] [--dry-run] [--host <name>]
-#
-#   --check     Only report drift (exit 1 if found, 2 if nix-cache is
-#               unreachable); never writes. For CI/maintenance use.
-#   --dry-run   Show what would change; never writes.
-#   --host      Override the hostname to scan (default: variables.nix's
-#               nixCacheHost / env.sh's NIX_CACHE_HOST).
-set -euo pipefail
-
-repo_root="$(cd "$(dirname "$0")/../.." && pwd)"
-variables_nix="${repo_root}/variables.nix"
-client_script="${repo_root}/scripts/proxmox/configure-nix-cache-client.sh"
-
-# shellcheck source=../env.sh
-source "${repo_root}/scripts/env.sh"
-
-check_only=0
-dry_run=0
-host="${NIX_CACHE_HOST}"
-
-while [[ $# -gt 0 ]]; do
-  case "$1" in
-    --check) check_only=1; shift ;;
-    --dry-run) dry_run=1; shift ;;
-    --host)
-      host="${2:?--host requires a hostname}"
-      shift 2
-      ;;
-    -h|--help)
-      sed -n '2,23p' "$0"
-      exit 0
-      ;;
-    *)
-      echo "ERROR: unknown argument: $1" >&2
-      exit 1
-      ;;
-  esac
-done
-
-current_value="$(grep -oE 'nixCacheHostKey = "[^"]+"' "$variables_nix" | sed -E 's/nixCacheHostKey = "(.*)"/\1/')"
-if [[ -z "$current_value" ]]; then
-  echo "ERROR: couldn't find nixCacheHostKey in $variables_nix" >&2
-  exit 1
-fi
-current_type_blob="$(awk '{print $1, $2}' <<<"$current_value")"
-current_label="$(awk '{print $3}' <<<"$current_value")"
-
-echo "Scanning ${host} for its current ed25519 SSH host key..."
-nix_extra_opts
-scanned="$(nix-shell "${NIX_OPTS[@]}" -p openssh --run "ssh-keyscan -t ed25519 -T 5 '${host}'" 2>/dev/null | grep -v '^#' | head -1 || true)"
-if [[ -z "$scanned" ]]; then
-  echo "ERROR: couldn't reach ${host} (or got no ed25519 host key back) via ssh-keyscan." >&2
-  exit 2
-fi
-scanned_type_blob="$(awk '{print $2, $3}' <<<"$scanned")"
-
-if [[ "$current_type_blob" == "$scanned_type_blob" ]]; then
-  echo "Up to date: ${host}'s host key matches variables.nix's nixCacheHostKey."
-  exit 0
-fi
-
-echo "DRIFT DETECTED:"
-echo "  variables.nix has: $current_type_blob"
-echo "  ${host} is now:    $scanned_type_blob"
-
-if [[ "$check_only" -eq 1 ]]; then
-  echo
-  echo "Run 'scripts/secrets/sync-nix-cache-host-key.sh' (no flags) to fix." >&2
-  exit 1
-fi
-
-new_value="${scanned_type_blob} ${current_label}"
-
-if [[ "$dry_run" -eq 1 ]]; then
-  echo "(--dry-run: would update variables.nix and ${client_script##*/} to:)"
-  echo "  $new_value"
-  exit 0
-fi
-
-sed -i "s|nixCacheHostKey = \"[^\"]*\"|nixCacheHostKey = \"${new_value}\"|" "$variables_nix"
-sed -i "s|NIX_CACHE_HOST_KEY:=[^}]*}|NIX_CACHE_HOST_KEY:=${new_value}}|" "$client_script"
-
-echo "Updated variables.nix and ${client_script##*/} to:"
-echo "  $new_value"
-echo
-echo "This only takes effect on already-deployed NixOS clients after their"
-echo "next rebuild (programs.ssh.knownHosts is declarative). Review with"
-echo "'git diff', then run 'bash scripts/codex-maintenance.sh' before committing."

variables.nix

@@ -26,7 +26,7 @@
   # fresh client that has never manually ssh'd to nix-cache before. Update
   # this if nix-cache's host key is ever rotated or the host is rebuilt
   # from scratch.
-  nixCacheHostKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPeWgMsdaiz4axT/deFc1+0B5bN+GX/NOeW9bbQ0c/IT lxc-nix-cache";
+  nixCacheHostKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHrMKZlIGUd3pH9G3AqbsruqUGjxIXMAZw52u9MwiBCn lxc-nix-cache";
 
   # Public keys authorized to SSH in as remoteBuilderUser on the nix-cache
   # host (modules/nix-cache/server.nix) — one per client host that's allowed