Compare commits

...
Author SHA1 Message Date
beatzaplentyandClaude Sonnet 4.6 e62e9c9a6a chore: full sweep — docs sync, SSH key module extraction, NFS dedup, dead code removal
Check NixOS configurations / eval-hosts (pull_request) Successful in 10m40s
Documentation fixes:
- README/AGENTS: rename tailscale-exit-node → tailscale-router, add ha-server
  build type and proxmox-ha-server-{1,2} host table rows, add baremetal to
  platform list, remove references to non-existent flake-target-refactor-spec.md
  and remove-sensetive-info-refactor.md
- docs/auto-installer.md: fix lxc-tailscale-exit-node → lxc-tailscale-router,
  add pxe-minimal to the flake outputs list
- variables.nix: fix domainControllerIp comment — IPA is the authoritative DNS
  at .253 (Pi-hole is gone), not a forwarding intermediary

Code deduplication:
- Extract duplicate SSH host-key preservation activation scripts from
  modules/platforms/lxc.nix and modules/platforms/proxmox.nix into a shared
  modules/common/preserve-ssh-host-key.nix; both platforms now import it
- Replace 8-line hand-enumerated NFS export lists in server.nix and ha-server.nix
  with a mkNfsExports helper that generates exports from vars.nfsShares — adding
  a share to variables.nix now propagates to both exporters automatically

Dead code removal:
- modules/common/configuration.nix: remove leftover NixOS skeleton comments
  (hardware-configuration import, grub lines) that were never used
- modules/docker/enable-service.nix: remove commented-out listenOptions and
  daemon.settings blocks
- hosts/server/host.nix, hosts/nix-cache/host.nix: remove #DOCKER_HOST comments

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 15:18:06 +10:00
beatzaplentyandClaude Sonnet 4.6 fe7fc55c04 feat(docker): add IPA wayne user to docker group
Check NixOS configurations / eval-hosts (push) Failing after 12m13s
Grants the domain wayne account docker socket access on docker.sweet.home
without needing sudo, alongside the existing nixos local user membership.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 14:07:34 +10:00
beatzaplentyandClaude Sonnet 4.6 6cdae391f4 fix(docker): pin IPA dyndns to eth0 to prevent Docker bridge IP registration
SSSD's dyndns_iface defaults to "*" which registers every interface's IP in
IPA DNS, including all Docker bridge networks (172.x.x.x). This caused
docker.sweet.home to resolve to Docker bridge IPs instead of 192.168.2.225.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 14:07:34 +10:00
beatzaplenty 95eb494370 Merge pull request 'Worktree ipa lxc kerberos fix' (#88) from worktree-ipa-lxc-kerberos-fix into main
Check NixOS configurations / eval-hosts (push) Failing after 9m47s
Reviewed-on: #88
2026-07-28 03:39:23 +00:00
beatzaplentyandClaude Sonnet 4.6 9294d2fd25 fix(ipa): skip home-manager-wayne service when home dir absent
Check NixOS configurations / eval-hosts (pull_request) Failing after 9m42s
On first enrollment /home/wayne doesn't exist until the IPA user's first
login (pam_mkhomedir creates it). home-manager-<user>.service cd's into
the home dir immediately and fails with ENOENT, causing the whole rebuild
activation to return exit code 4.

Add ConditionPathExists so systemd skips the service (condition not met,
no failure) instead. After first login the dir exists and subsequent
rebuilds activate Home Manager normally.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 13:38:49 +10:00
beatzaplentyandClaude Sonnet 4.6 0fe7ddf6e8 fix(ipa): reject FQDN input in create-nixos-ipa-host-account.sh
Passing a FQDN like "nixos.sweet.home" instead of the short hostname
"nixos" caused the script to create a double-FQDN IPA host account
(nixos.sweet.home.sweet.home). Add an early check that rejects any
TARGET containing a dot.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 13:23:48 +10:00
beatzaplenty 5c2d61d35a Merge pull request 'fix(ipa): use NOPASSWD sudo for IPA user to bypass broken PAM path' (#87) from worktree-ipa-lxc-kerberos-fix into main
Check NixOS configurations / eval-hosts (push) Failing after 9m45s
Reviewed-on: #87
2026-07-28 03:16:03 +00:00
beatzaplentyandClaude Sonnet 4.6 186e9187ce fix(ipa): use NOPASSWD sudo for IPA user to bypass broken PAM path
Check NixOS configurations / eval-hosts (pull_request) Failing after 9m44s
HM's useUserPackages creates a users.users stub for every configured HM
user, which lands wayne in /etc/passwd. NixOS adds pam_sss.so with the
"localusers" flag to the sudo PAM stack when SSSD is enabled; that flag
causes pam_sss to skip SSSD for any user found in local /etc/passwd,
falling through to pam_unix which has no shadow password for the stub.
Result: sudo auth always fails for the IPA user despite being in wheel.

Use NOPASSWD for the IPA user in sudoers instead. The IPA user already
authenticated to reach a shell (SSH key from IPA or Kerberos), so
re-prompting via a broken PAM path is security theater on a homelab.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 13:12:42 +10:00
beatzaplenty e6f15404f5 Merge pull request 'fix(ipa): add wheel group to IPA user stub for sudo access' (#86) from worktree-ipa-lxc-kerberos-fix into main
Check NixOS configurations / eval-hosts (push) Successful in 10m54s
Reviewed-on: #86
2026-07-28 03:00:33 +00:00
beatzaplentyandClaude Sonnet 4.6 44a0acc18f fix(ipa): add wheel group to IPA user stub for sudo access
Check NixOS configurations / eval-hosts (pull_request) Failing after 28m20s
initgroups() uses NSS (groups: files sss) to build the supplemental
group list at login. Adding wheel to the local users.users stub means
the IPA user gets wheel membership from /etc/group, satisfying sudo's
group check.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 12:59:46 +10:00
beatzaplenty 1fc6e63178 Merge pull request 'Worktree ipa lxc kerberos fix' (#85) from worktree-ipa-lxc-kerberos-fix into main
Check NixOS configurations / eval-hosts (push) Failing after 33m33s
Reviewed-on: #85
2026-07-28 02:55:20 +00:00
beatzaplentyandClaude Sonnet 4.6 3589fc31d7 feat(ipa): add Home Manager config for IPA primary user
Check NixOS configurations / eval-hosts (pull_request) Failing after 40m50s
Any enrolled host now automatically gets a Home Manager profile for the
IPA primary user (vars.ipaUser = "wayne"), covering what IPA doesn't:
dotfiles, user-scoped packages (tmux, sshfs), and EDITOR variable.

The home directory is pre-created by systemd-tmpfiles so HM activation
succeeds on steady-state systems before first login; pam_mkhomedir remains
as a fallback for fresh deploys where SSSD hasn't cached the user yet.

A minimal users.users stub satisfies NixOS's assertion requirements
(isNormalUser + group) that arise because home-manager.useUserPackages
creates a users.users entry to install packages to /etc/profiles/per-user/.
The stub is shadowed by SSSD at runtime (security.ipa sets passwd: sss files).

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 12:53:10 +10:00
beatzaplentyandClaude Sonnet 4.6 89746718a9 feat(shell): make Switch-nix/Test-nix/buildImage system-wide
IPA users (e.g. wayne@) don't get Home Manager so the aliases defined in
aliases.nix were invisible to them. Move Switch-nix, Test-nix, and
buildImage into programs.bash in configuration.nix so every user on every
host gets them via /etc/bashrc. Stub out aliases.nix for future per-user
HM-only additions.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 12:32:33 +10:00
beatzaplenty 232d0e7c40 Merge pull request 'fix(ipa): suppress Kerberos NFS services in LXC containers' (#84) from worktree-ipa-lxc-kerberos-fix into main
Check NixOS configurations / eval-hosts (push) Successful in 10m32s
Reviewed-on: #84
2026-07-28 02:13:47 +00:00
beatzaplentyandClaude Sonnet 4.6 0b60d3ff2d fix(ipa): suppress Kerberos NFS services in LXC containers
Check NixOS configurations / eval-hosts (pull_request) Successful in 10m30s
The NixOS IPA module adds ConditionPathExists=/etc/krb5.keytab drop-ins
for auth-rpcgss-module.service and rpc-gssd.service via systemd.units.
In LXC containers with keytabs those conditions pass, the services start,
and then fail because auth_rpcgss can't be loaded and rpc_pipefs doesn't
exist in the container namespace.

Use lib.mkForce on our systemd.units text to win the conflict with NixOS's
existing definitions, and include ConditionVirtualization=!container
alongside the ConditionPathExists conditions so the services are skipped
(inactive, not failed) in containers that have a keytab.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 12:07:58 +10:00
beatzaplenty ff82e8885d added remaining ipa keytabs
Check NixOS configurations / eval-hosts (push) Successful in 10m22s
2026-07-28 11:45:06 +10:00
beatzaplenty 9a7411d1dd Merge pull request 'Worktree ipa common config' (#83) from worktree-ipa-common-config into main
Check NixOS configurations / eval-hosts (push) Failing after 9m46s
Reviewed-on: #83
2026-07-28 01:43:53 +00:00
beatzaplentyandClaude Sonnet 4.6 2f829ba3e7 refactor(ipa): move FreeIPA client to common config with auto-enrollment
Check NixOS configurations / eval-hosts (pull_request) Failing after 9m48s
modules/ipa/client.nix is now a self-contained NixOS module (no longer a
parameterized function): it checks builtins.pathExists for
secrets/<hostname>.keytab at eval time and enables itself automatically if
found, making it a no-op for hosts without a keytab.

modules/common/configuration.nix imports it so every host in the flake is
a candidate for IPA enrollment — no per-host wiring needed. Adding a
keytab (via scripts/ipa/create-nixos-ipa-host-account.sh) is now the
only step required to enroll a host.

The module also sets networking.domain and networking.nameservers via
mkDefault when active, so new hosts don't need those set explicitly.

Also:
- Remove explicit IPA imports from hosts/nix-cache and hosts/tailscale-router
- Add secrets/pxe-boot.keytab + creation rule; remove incorrect
  secrets/nixos.sweet.home.keytab and its creation rule
- Add .sops.yaml creation rules for all remaining host keytabs
  (server, docker, tor-relay, nix-minimal, nixos) so the creation script
  can target them without manual .sops.yaml edits
- Fix duplicate tailscale-router.keytab rule and corrupted gui.yaml comment
  block in .sops.yaml

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 11:15:59 +10:00
beatzaplenty dedd69dc42 secrets: add IPA keytab for nixos.sweet.home 2026-07-28 10:43:43 +10:00
beatzaplenty f7f670ca4c Merge remote-tracking branch 'origin/worktree-docker-gui-fix'
Check NixOS configurations / eval-hosts (push) Successful in 10m27s
2026-07-28 10:33:15 +10:00
beatzaplenty 55ba283c82 Merge branch 'main' into worktree-docker-gui-fix
Check NixOS configurations / eval-hosts (pull_request) Successful in 10m24s
2026-07-28 00:32:06 +00:00
beatzaplenty 2d46d25a67 Merge pull request 'fix(ipa): harden script and update module docs' (#82) from worktree-ipa-client-module into main
Check NixOS configurations / eval-hosts (push) Failing after 9m45s
Reviewed-on: #82
2026-07-28 00:25:13 +00:00
beatzaplentyandClaude Sonnet 4.6 f5d29be041 fix(ipa): harden script and update module docs
Check NixOS configurations / eval-hosts (pull_request) Failing after 9m53s
Script fixes:
- Rename HOSTNAME variable to TARGET (shadowed the bash builtin)
- Fix ipa-getkeytab -s to always use IPA_SERVER, not DC_HOST (diverge if
  --dc is overridden to a jump host)
- Remove dead REALM variable
- Add EXIT trap to delete the plaintext keytab if the script aborts before
  sops encryption completes; cleared after successful encrypt
- Distinguish real ipa host-add failures from "already exists" instead of
  swallowing all errors with || true
- Warn explicitly when no platform age keys exist for the target (keytab
  would be admin-only and the host couldn't decrypt it at boot)
- Fix sops fallback from pinned nixos-25.11 channel to nixpkgs (uses the
  repo's own flake.lock)
- Expand "next steps" output to include networking.domain and nameservers
  lines that host.nix requires for IPA membership

Module docs:
- Point to the script as the primary setup path; move manual steps to a
  fallback section
- Note that certs/ipa-ca.crt is already committed (no need to re-fetch)
- Document the networking.domain and nameservers requirements in the header
- Add sync-host-keys.sh as explicit step 0

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 10:24:23 +10:00
beatzaplenty e10a1572c3 Merge branch 'main' of https://gitea.lan.ddnsgeek.com/beatzaplenty/nixos
Check NixOS configurations / eval-hosts (push) Successful in 10m25s
2026-07-28 10:23:34 +10:00
beatzaplenty 578ef70aa9 updated flake.lock 2026-07-28 10:23:23 +10:00
beatzaplenty e9fcbbbbcb Merge pull request 'Worktree ipa client module' (#80) from worktree-ipa-client-module into main
Check NixOS configurations / eval-hosts (push) Failing after 9m47s
Reviewed-on: #80
2026-07-28 00:13:08 +00:00
beatzaplentyandClaude Sonnet 4.6 f46ae18672 fix(ipa): work around OpenSSH 10 AuthorizedKeysCommand path check
Check NixOS configurations / eval-hosts (pull_request) Failing after 9m43s
OpenSSH 10.0 tightened AuthorizedKeysCommand security by checking every
path component of the command binary for group/world-write permission.
/nix/store is 1775 (group-writable by nixbld), so sshd silently skips
the command for any binary in the Nix store — causing IPA pubkey auth to
silently fail with no diagnostic.

Fix: copy sss_ssh_authorizedkeys to /usr/local/bin via systemd tmpfiles
(C+ copies the file rather than symlinking, so the path at runtime is
root-owned/755 throughout), and point AuthorizedKeysCommand at the copy.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 10:08:57 +10:00
beatzaplenty fc277294f3 add vars to module
Check NixOS configurations / eval-hosts (push) Successful in 10m32s
2026-07-28 10:02:58 +10:00
beatzaplenty f3e5ea67a0 add docker group to user in enable docker service module
Check NixOS configurations / eval-hosts (push) Successful in 10m33s
2026-07-28 09:59:48 +10:00
beatzaplenty 7a8aebf679 Merge branch 'worktree-docker-gui-fix' 2026-07-28 09:59:40 +10:00
beatzaplenty a8d95aad02 enable docker
Check NixOS configurations / eval-hosts (push) Failing after 9m45s
2026-07-28 09:49:14 +10:00
beatzaplentyandClaude Sonnet 4.6 dac5fbd574 feat(gui): enable docker service on workstation
Check NixOS configurations / eval-hosts (pull_request) Failing after 9m45s
Imports docker/enable-service.nix and pins virtualisation.docker to
docker_29 via a nixpkgs overlay. Fixes indentation on `imports` block
and `programs.direnv.enable` line so nixpkgs-fmt passes.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 09:48:59 +10:00
beatzaplenty da0c651c60 Merge branch 'worktree-ipa-client-module' 2026-07-28 09:48:55 +10:00
beatzaplentyandClaude Sonnet 4.6 97019205da fix(ipa): create home dir on first login + AuthorizedKeysCommand
Check NixOS configurations / eval-hosts (pull_request) Failing after 9m45s
- security.pam.services.sshd.makeHomeDir: IPA users have no pre-created
  home directory on the host; without this, sshd opens a session to a
  missing directory and resets the connection immediately after auth
- AuthorizedKeysCommand was already added in previous commit

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 09:47:11 +10:00
beatzaplentyandClaude Sonnet 4.6 5487490b8e feat(ipa): add AuthorizedKeysCommand + enroll tailscale-router
- modules/ipa/client.nix: add AuthorizedKeysCommand so sshd fetches SSH
  public keys from IPA via sss_ssh_authorizedkeys, enabling pubkey login
  without per-host authorized_keys files

- hosts/tailscale-router/host.nix: add IPA client module + networking.domain
  so SSSD runs and wayne can authenticate on this host

- secrets/tailscale-router.keytab: sops-encrypted keytab for
  tailscale-router.sweet.home (generated by create-nixos-ipa-host-account.sh)

- .sops.yaml: creation rule for secrets/tailscale-router.keytab

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 09:42:38 +10:00
beatzaplenty 543ea432f0 Merge pull request 'fix(tailscale-router): stop dnsmasq from intercepting host DNS queries' (#79) from worktree-peaceful-stirring-noodle into main
Check NixOS configurations / eval-hosts (push) Successful in 10m33s
Reviewed-on: #79
2026-07-27 23:27:34 +00:00
beatzaplentyandClaude Sonnet 4.6 c7bbf88dce fix(tailscale-router): stop dnsmasq from intercepting host DNS queries
Check NixOS configurations / eval-hosts (pull_request) Successful in 10m30s
NixOS's dnsmasq module defaults resolveLocalQueries to true, which adds
127.0.0.1 to networking.nameservers and binds dnsmasq to listen-address=127.0.0.1.
This made the host route all its own DNS through dnsmasq, which had
no-resolv=true and no upstream for anything outside the tailnet domain —
so every non-tailscale DNS query from the host itself (including SSSD
resolving the IPA server FQDN after the IPA client module was added) failed.

Setting resolveLocalQueries=false limits dnsmasq to its intended role: a
forwarding proxy reachable on the LAN interface for IPA's conditional
forwarder. The host uses domainControllerIp directly (already set in
networking.nameservers in host.nix).

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 09:26:50 +10:00
beatzaplenty d57145b31e add tailscale-router to domain
Check NixOS configurations / eval-hosts (push) Failing after 9m44s
2026-07-28 09:17:29 +10:00
beatzaplenty 1cbe80c0ca secrets: add IPA keytab for tailscale-router 2026-07-28 09:15:21 +10:00
beatzaplenty 01ee261cf8 Merge pull request 'fix(ipa): stream keytab via sudo cat instead of scp' (#78) from worktree-ipa-client-module into main
Check NixOS configurations / eval-hosts (push) Successful in 10m22s
Reviewed-on: #78
2026-07-27 23:14:41 +00:00
beatzaplentyandClaude Sonnet 4.6 f6f30c675f fix(ipa): stream keytab via sudo cat instead of scp
Check NixOS configurations / eval-hosts (pull_request) Successful in 10m25s
ipa-getkeytab runs as root via sudo so the temp file is root-owned;
scp as wayne gets Permission denied. Pipe through `sudo cat` over SSH
instead, which reads as root but writes locally as the invoking user.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 09:08:19 +10:00
beatzaplenty 60b80cbd96 Merge pull request 'fix(ipa): SSH as wayne with sudo instead of root on domain controller' (#77) from worktree-ipa-client-module into main
Check NixOS configurations / eval-hosts (push) Successful in 10m21s
Reviewed-on: #77
2026-07-27 23:06:49 +00:00
beatzaplentyandClaude Sonnet 4.6 27a8c7fad9 fix(ipa): SSH as wayne with sudo instead of root on domain controller
Check NixOS configurations / eval-hosts (pull_request) Successful in 10m23s
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 09:02:32 +10:00
beatzaplenty d9cee0a674 Merge pull request 'feat(ipa): add create-nixos-ipa-host-account script' (#76) from worktree-ipa-client-module into main
Check NixOS configurations / eval-hosts (push) Successful in 10m22s
Reviewed-on: #76
2026-07-27 22:58:46 +00:00
beatzaplentyandClaude Sonnet 4.6 6c1891812e feat(ipa): add create-nixos-ipa-host-account script
Check NixOS configurations / eval-hosts (pull_request) Successful in 10m24s
Single command to enroll a NixOS host in FreeIPA and produce a
sops-encrypted keytab at secrets/<hostname>.keytab:
  - Adds the .sops.yaml creation rule automatically (with all registered
    platform-variant age keys as recipients)
  - SSHes to the domain controller to run ipa host-add + ipa-getkeytab
  - Refreshes the admin Kerberos ticket via `ssh -t ... kinit admin` if
    missing or expired, so no manual kinit step is needed
  - SCPs the keytab and encrypts it in-place with sops (file must be at
    secrets/<hostname>.keytab before encryption so the path-based creation
    rule matches — the common failure point when doing this manually)

Also adds HOME_DOMAIN and IPA_SERVER to scripts/env.sh, matching
variables.nix's homeDomain/ipaServer (same manual-sync pattern as
NIX_CACHE_HOST/LAN_DOMAIN).

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 08:57:55 +10:00
beatzaplenty 59316c982e Merge branch 'main' of https://gitea.lan.ddnsgeek.com/beatzaplenty/nixos
Check NixOS configurations / eval-hosts (push) Successful in 10m27s
2026-07-28 07:26:40 +10:00
beatzaplenty 9eca3bd719 Merge pull request 'Worktree ipa client module' (#75) from worktree-ipa-client-module into main
Check NixOS configurations / eval-hosts (push) Failing after 9m45s
Reviewed-on: #75
2026-07-27 21:25:57 +00:00
beatzaplenty f2f0fcf756 certs: add FreeIPA CA certificate
Check NixOS configurations / eval-hosts (pull_request) Failing after 9m45s
2026-07-28 07:25:28 +10:00
beatzaplenty b4fb9c25f2 secrets(nix-cache): add sops-encrypted IPA host keytab 2026-07-28 07:25:25 +10:00
beatzaplentyandClaude Sonnet 4.6 8955840f0a fix(ipa): use in-place sops encryption in module docs
sops matches creation rules against the input file path, so encrypting
/tmp/<host>.keytab directly with stdout redirect fails to find the rule.
Copy to secrets/ first, then use -i to encrypt in-place.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 07:19:53 +10:00
beatzaplentyandClaude Sonnet 4.6 a4b49c9909 fix(ipa): correct ipaServer to domain-controller.sweet.home
ipa-getkeytab confirmed ipa.sweet.home doesn't respond to LDAP;
domain-controller.sweet.home is the actual IPA server FQDN.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-28 07:16:53 +10:00
beatzaplenty c0936a10e7 Merge pull request 'feat(ipa): add reusable declarative FreeIPA client module' (#74) from worktree-ipa-client-module into main
Check NixOS configurations / eval-hosts (push) Failing after 9m45s
Reviewed-on: #74
2026-07-27 21:06:28 +00:00
beatzaplentyandClaude Sonnet 4.6 f4bbd6331d feat(ipa): add reusable declarative FreeIPA client module
Check NixOS configurations / eval-hosts (pull_request) Failing after 10m0s
Adds modules/ipa/client.nix — a parameterized module that joins a NixOS host
to the sweet.home FreeIPA domain without ipa-client-install. It configures
security.ipa (SSSD, Kerberos, PAM, NSSwitch) and places a pre-provisioned host
keytab via sops-nix binary secret so enrollment is fully reproducible from the
flake.

- variables.nix: adds ipaServer (FQDN of the FreeIPA KDC; security.ipa.server
  requires a hostname, not an IP, for Kerberos/TLS)
- certs/ipa-ca.crt: placeholder for the IPA CA public certificate (operator
  replaces with: curl http://<ipa-server>/ipa/config/ca.crt)
- secrets/nix-cache.keytab: placeholder binary sops file (operator replaces
  with the encrypted keytab after ipa host-add + ipa-getkeytab)
- .sops.yaml: adds creation rule for secrets/nix-cache.keytab (same recipients
  as secrets/nix-cache.yaml)
- hosts/nix-cache/host.nix: imports the IPA client module; adds
  networking.domain so the host's FQDN resolves correctly

Module header documents the three operator steps needed per host before deploy.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-27 23:31:21 +10:00
beatzaplenty b99ba87cf6 Merge branch 'main' of https://gitea.lan.ddnsgeek.com/beatzaplenty/nixos 2026-07-27 23:05:35 +10:00
beatzaplenty 2128353f9f Merge pull request 'Fix/static ips' (#73) from fix/static-ips into main
Check NixOS configurations / eval-hosts (push) Failing after 42m27s
Reviewed-on: #73
2026-07-27 12:06:33 +00:00
beatzaplenty bba054db85 Merge branch 'main' of https://gitea.lan.ddnsgeek.com/beatzaplenty/nixos
# Conflicts:
#	variables.nix
2026-07-27 18:29:07 +10:00
beatzaplenty b63a529a1d Merge branch 'fix/static-ips' 2026-07-27 18:25:37 +10:00
beatzaplenty 1ece0c75d9 Merge pull request 'chore(pxe-boot): remove log-dhcp debug flag now that PXE boot is confirmed working' (#86) from fix/pxe-dnsmasq-port-conflict into main
Reviewed-on: #86
2026-07-27 05:52:18 +00:00
beatzaplentyandClaude Sonnet 4.6 548c6f5041 chore(pxe-boot): remove log-dhcp debug flag now that PXE boot is confirmed working
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-27 15:50:19 +10:00
beatzaplenty bae4c8171f Merge pull request 'fix(pxe-boot): use current pxe-boot IP (.247) in dnsmasq until Stage 5 renumber' (#85) from fix/pxe-dnsmasq-port-conflict into main
Reviewed-on: #85
2026-07-27 05:41:38 +00:00
beatzaplentyandClaude Sonnet 4.6 3748c86049 fix(pxe-boot): use current pxe-boot IP (.247) in dnsmasq until Stage 5 renumber
vars.pxeServerIp was already set to the post-renumber target (.223) but the
pxe-boot CT is still at .247, so dnsmasq was advertising .223 as the TFTP server
and the VM couldn't reach it.  Update to .247 so PXE boot works now; the comment
reminds us to flip it back to .223 when Stage 5 step 6 renumbers the CT.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-27 15:40:54 +10:00
beatzaplenty 9dd969cf4c Merge pull request 'fix(pxe-boot): open UDP 4011 for PXE boot service discovery' (#84) from fix/pxe-dnsmasq-port-conflict into main
Reviewed-on: #84
2026-07-27 05:22:46 +00:00
beatzaplentyandClaude Sonnet 4.6 7e4b2d33fb fix(pxe-boot): open UDP 4011 for PXE boot service discovery
After the proxy DHCP handshake, the UEFI client queries the PXE boot
server on UDP port 4011 to get the actual boot filename. This port was
not open in the NixOS firewall, so all four PXE discovery attempts from
the test VM silently timed out. dnsmasq was bound to 0.0.0.0:4011 but
never received the packets.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-27 15:12:12 +10:00
beatzaplenty 288d50fd33 Merge pull request 'Fix/pxe dnsmasq port conflict' (#83) from fix/pxe-dnsmasq-port-conflict into main
Reviewed-on: #83
2026-07-27 05:05:42 +00:00
beatzaplentyandClaude Sonnet 4.6 f0e76f8aff fix(pxe-boot): use pxe-service for proxy DHCP initial boot offers
dnsmasq 2.93 does not send proxy DHCP offers from dhcp-boot alone in proxy
mode — pxe-service is required to trigger proxy offers for the initial boot.

Replace the dhcp-boot-based arch detection with pxe-service entries for
arch 0 (BIOS), 7 (EFI BC / OVMF), and 9 (EFI x86-64), then use dhcp-boot
only for the iPXE second-boot HTTP chain (tag:ipxe clients). Add log-dhcp
for post-deploy verification.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-07-27 15:03:01 +10:00
31 changed files with 937 additions and 194 deletions
+70
View File
@@ -125,3 +125,73 @@ creation_rules:
- *baremetal-gui
- *linode-gui
- *proxmox-gui
# IPA host keytabs (binary sops files).
# Each keytab is encrypted for all platform variants of that host so any
# deployed variant can decrypt it at boot. Run
# scripts/ipa/create-nixos-ipa-host-account.sh <hostname> to enroll a new
# host and produce the keytab; this section is updated by that script.
- path_regex: secrets/nix-cache\.keytab$
key_groups:
- age:
- *admin
- *linode-nix-cache
- *lxc-nix-cache
- *proxmox-nix-cache
- path_regex: secrets/tailscale-router\.keytab$
key_groups:
- age:
- *admin
- *linode-tailscale-router
- *lxc-tailscale-router
- *proxmox-tailscale-router
- path_regex: secrets/pxe-boot\.keytab$
key_groups:
- age:
- *admin
- *lxc-pxe-boot
- *proxmox-pxe-boot
# nixos = the workstation (hosts/nixos/host.nix). All gui platform variants
# share the hostname "nixos" and must be able to decrypt at boot.
- path_regex: secrets/nixos\.keytab$
key_groups:
- age:
- *admin
- *baremetal-gui
- *lxc-gui
- *proxmox-gui
- *linode-gui
- path_regex: secrets/server\.keytab$
key_groups:
- age:
- *admin
- *linode-server
- *lxc-server
- *proxmox-server
- path_regex: secrets/docker\.keytab$
key_groups:
- age:
- *admin
- *linode-docker
- *lxc-docker
- *proxmox-docker
- path_regex: secrets/tor-relay\.keytab$
key_groups:
- age:
- *admin
- *lxc-tor-relay
- path_regex: secrets/nix-minimal\.keytab$
key_groups:
- age:
- *admin
- *lxc-minimal
- *proxmox-minimal
- *linode-minimal
+8 -6
View File
@@ -6,12 +6,14 @@ This repository contains flake-based NixOS configurations for Wayne's LAN
servers and workstation.
The flake exposes NixOS configurations named `<platform>-<buildtype>`
(platforms: `linode`, `proxmox`, `lxc`; build types: `minimal`, `nix-cache`,
`server`, `docker`, `gui`, `pxe-boot`, `tailscale-exit-node`, `tor-relay`), generated from `modules/platforms/*`
and `modules/build-types/*` by the `mkTarget` function in `flake.nix`. Not
every combination is built — `pxe-boot` has no `linode` variant. See
`README.md` for the full current target list; treat `flake.nix` as the
source of truth since this list can drift.
(platforms: `linode`, `proxmox`, `lxc`, `baremetal`; build types: `minimal`,
`nix-cache`, `server`, `docker`, `gui`, `pxe-boot`, `tailscale-router`,
`tor-relay`, `ha-server`), generated from `modules/platforms/*` and
`modules/build-types/*` by the `mkTarget` function in `flake.nix`. Not every
combination is built — `pxe-boot` has no `linode` variant, `ha-server` only
exists on `proxmox`, and `tor-relay` only exists on `lxc`. See `README.md`
for the full current target list; treat `flake.nix` as the source of truth
since this list can drift.
Do not deploy, switch, reboot, repartition, format disks, or run destructive
install commands from this repository unless explicitly asked.
+10 -11
View File
@@ -10,13 +10,13 @@ pieces composed in `flake.nix`:
- **Platforms** (what it runs on): `linode`, `proxmox`, `lxc`, `baremetal`
- **Build types** (what it's for): `minimal`, `nix-cache`, `server`, `docker`,
`gui`, `pxe-boot`, `tailscale-exit-node`, `tor-relay`
`gui`, `pxe-boot`, `tailscale-router`, `tor-relay`, `ha-server`
Not every combination exists — `pxe-boot` has no `linode` variant, since
PXE/DHCP/TFTP need LAN L2 adjacency that a Linode VPS doesn't have,
`tor-relay` currently only exists as `lxc-tor-relay`, and `baremetal`
currently only exists as `baremetal-gui` (the real gui-host hardware). The
full list:
`tor-relay` and `ha-server` currently only exist on `lxc`/`proxmox`, and
`baremetal` currently only exists as `baremetal-gui` (the real gui-host
hardware). The full list:
| Target | Purpose |
| --- | --- |
@@ -29,8 +29,9 @@ full list:
| `linode-gui` / `proxmox-gui` / `lxc-gui` | Cinnamon desktop workstation — previously the flat `nixos` target |
| `baremetal-gui` | Same Cinnamon desktop workstation, on the real gui-host hardware — ZFS RAID0 root, systemd-boot |
| `proxmox-pxe-boot` / `lxc-pxe-boot` | HTTP/iPXE boot asset host — previously the flat `pxe-boot` target |
| `linode-tailscale-exit-node` / `proxmox-tailscale-exit-node` / `lxc-tailscale-exit-node` | Tailscale exit node |
| `linode-tailscale-router` / `proxmox-tailscale-router` / `lxc-tailscale-router` | Tailscale subnet router + MagicDNS forwarder for the LAN |
| `lxc-tor-relay` | Tor middle relay |
| `proxmox-ha-server-1` / `proxmox-ha-server-2` | HA file-server cluster nodes — DRBD + XFS + iSCSI + NFS, managed by Corosync + Pacemaker |
Which variant of a given buildtype is actually deployed isn't tracked
anywhere in this repo — that's live infrastructure state, not something a
@@ -47,8 +48,7 @@ section for which is which.
Each buildtype's `hosts/<name>/host.nix` carries the per-machine identity
(hostname, hostId, per-machine secrets, `system.stateVersion`) that must stay
fixed regardless of which platform it's built for — see
`flake-target-refactor-spec.md` for the full rationale. Every deployed host
fixed regardless of which platform it's built for. Every deployed host
stamps its own active target name into `/etc/flake-target` at build time, so
`nixos-rebuild switch --flake .#$(cat /etc/flake-target)` always picks up the
right one even after a platform migration changes the flake attribute name.
@@ -167,7 +167,6 @@ per-boot host key for sops-nix to derive from on ephemeral media) — see
(`vars/per-machine/<target>/openssh/`, committed and sops-encrypted) for
their SSH host keys.
This repository's git *history* still contains secrets committed before this
migration (see `remove-sensetive-info-refactor.md`) — those are being
scrubbed and rotated separately; don't treat the repo as safe to make public
until that's finished.
This repository's git *history* still contains secrets committed before the
sops-nix migration — those are being scrubbed and rotated separately; don't
treat the repo as safe to make public until that's finished.
+25
View File
@@ -0,0 +1,25 @@
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
+4 -2
View File
@@ -22,7 +22,7 @@ see "LXC hosts" immediately below for why those are different.**
## LXC hosts
`lxc-*` targets (`lxc-minimal`, `lxc-nix-cache`, `lxc-server`, `lxc-docker`,
`lxc-gui`, `lxc-pxe-boot`, `lxc-tailscale-exit-node`, `lxc-tor-relay`) are **not** installed via `auto-install.sh` — the
`lxc-gui`, `lxc-pxe-boot`, `lxc-tailscale-router`, `lxc-tor-relay`) are **not** installed via `auto-install.sh` — the
interactive menu deliberately excludes them. Don't try to select one there;
`nixos-install` would bind-mount `/` onto `/mnt` (LXC containers have no raw
disk to partition) and then refuse to touch the filesystem it's currently
@@ -134,12 +134,14 @@ Flake outputs:
nixosConfigurations.installer # ISO/netboot installer image
packages.x86_64-linux.iso # installer ISO/netboot image
packages.x86_64-linux.pxe # netboot-ipxe + netboot-initrd + netboot-kernel, bundled
packages.x86_64-linux.pxe # auto-installer netboot bundle (kernel + initrd + ipxe script)
packages.x86_64-linux.pxe-minimal # vanilla NixOS minimal netboot bundle (no installer wiring)
```
```sh
nix build .#iso
nix build .#pxe
nix build .#pxe-minimal
```
There's no `nixosConfigurations.proxmox-lxc` (installer-boots-as-an-LXC-
Generated
+6 -6
View File
@@ -173,11 +173,11 @@
]
},
"locked": {
"lastModified": 1784350909,
"narHash": "sha256-ZWyzLbS1yKUTeFJLmdVuWNnHttL333/ldJbEE+KzCrM=",
"lastModified": 1785119570,
"narHash": "sha256-Rgs2xKnGLFWQscxUaXX07oyZeuMDOHEbqDOsgliLFGM=",
"owner": "nix-community",
"repo": "home-manager",
"rev": "4ce190229c73d44536caa7072f6308fb2d8feeb3",
"rev": "d4fd24667c8cbef124bb70a20380cab75ec8474d",
"type": "github"
},
"original": {
@@ -259,11 +259,11 @@
},
"nixpkgs_2": {
"locked": {
"lastModified": 1784432872,
"narHash": "sha256-n3gKTBIV4ZA5VQpUakffBe3KGu4+mhPoA34rrqS0GkA=",
"lastModified": 1785104993,
"narHash": "sha256-eKbrvPoAOFutbYMdbB3r5EQVmFxKv24iKqHPPUXA0gM=",
"owner": "NixOS",
"repo": "nixpkgs",
"rev": "fd1462031fdee08f65fd0b4c6b64e22239a77870",
"rev": "8623c4c20aa4ca2f5fb81510d2944066c3fb0d96",
"type": "github"
},
"original": {
+5
View File
@@ -14,6 +14,11 @@
};
boot.zfs.forceImportRoot = false;
# Only advertise the LAN interface to IPA DNS. Without this, SSSD registers
# every Docker bridge (172.x.x.x) as an A record for docker.sweet.home —
# the default dyndns.interface = "*" catches them all.
security.ipa.dyndns.interface = vars.lxcLanInterface; # eth0
# Preserved from the pre-refactor `docker` target — stateVersion must never
# be bumped on an already-installed machine.
system.stateVersion = "25.05";
-1
View File
@@ -20,7 +20,6 @@
};
services.beszel.agent.environment = {
#DOCKER_HOST = "tcp://docker-socket-proxy:2375";
KEY = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFPR9kwtC4TAeTRu46A7+opZsYpxqkRJ+x/ZyB2GWCeG";
};
-1
View File
@@ -21,7 +21,6 @@
};
services.beszel.agent.environment = {
#DOCKER_HOST = "tcp://docker-socket-proxy:2375";
KEY = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFPR9kwtC4TAeTRu46A7+opZsYpxqkRJ+x/ZyB2GWCeG";
EXTRA_FILESYSTEMS = "${vars.storageRoot}/${vars.nfsShares.dockerVolumes.subpath}";
LOG_LEVEL = "debug";
+3
View File
@@ -33,6 +33,9 @@
];
users.users.${vars.primaryUser}.extraGroups = [ "docker" ];
# Grant the IPA domain user docker access via the local group so that
# `wayne` can manage containers without sudo.
users.groups.docker.members = [ "wayne" ];
services.openssh.settings.PermitRootLogin = "yes";
networking.firewall.allowedTCPPorts = [
+11
View File
@@ -1,6 +1,17 @@
{ config, pkgs, lib, inputs, vars, ... }:
{
imports = [
../docker/enable-service.nix
];
nixpkgs.overlays = [
(final: prev: {
docker = prev.docker_29;
docker_cli = prev.docker_29;
})
];
environment.systemPackages = with pkgs; [
inputs.nixos-conf-editor.packages.${pkgs.stdenv.hostPlatform.system}.nixos-conf-editor
nodejs
+11 -10
View File
@@ -15,6 +15,16 @@
# under services.beszel.agent.environment.KEY once the hub accepts the
# new agents, following the pattern in hosts/server/host.nix.
{ lib, vars, ... }:
let
# Generates /etc/exports lines for all nfsShares data entries. Shared
# pattern with modules/build-types/server.nix — both export the same
# set of shares, differing only in the storage root they serve from.
mkNfsExports = storageRoot:
lib.concatMapStrings
(share: " ${storageRoot}/${share.subpath} ${vars.lanCidr}${vars.nfsShares.options}\n")
(lib.filter builtins.isAttrs (lib.attrValues vars.nfsShares));
in
{
imports = [
../ha/pacemaker-stack.nix
@@ -25,16 +35,7 @@
services.nfs.server = {
enable = true;
exports = ''
${vars.haStorageRoot}/${vars.nfsShares.dockerConfig.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.haStorageRoot}/${vars.nfsShares.dockerVolumes.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.haStorageRoot}/${vars.nfsShares.dockerDatabases.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.haStorageRoot}/${vars.nfsShares.nextcloudData.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.haStorageRoot}/${vars.nfsShares.raspiVolumes.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.haStorageRoot}/${vars.nfsShares.proxmoxIsos.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.haStorageRoot}/${vars.nfsShares.proxmoxLxcImages.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.haStorageRoot}/${vars.nfsShares.pxebootImages.subpath} ${vars.lanCidr}${vars.nfsShares.options}
'';
exports = mkNfsExports vars.haStorageRoot;
};
# Pacemaker controls nfs-server — prevent systemd from starting it at boot
+10 -10
View File
@@ -13,6 +13,15 @@ let
lib.concatMap (share: ancestors share.subpath)
(lib.filter builtins.isAttrs (lib.attrValues vars.nfsShares))
);
# Generates /etc/exports lines for all nfsShares data entries (every
# attrset value — excludes the bare `options` string). Both server and
# ha-server export the same share set from different storage roots, so
# this helper is the single source of truth for the export line format.
mkNfsExports = storageRoot:
lib.concatMapStrings
(share: " ${storageRoot}/${share.subpath} ${vars.lanCidr}${vars.nfsShares.options}\n")
(lib.filter builtins.isAttrs (lib.attrValues vars.nfsShares));
in
{
imports = [
@@ -95,16 +104,7 @@ in
services.nfs.server = {
enable = true;
exports = ''
${vars.storageRoot}/${vars.nfsShares.dockerConfig.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.storageRoot}/${vars.nfsShares.dockerVolumes.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.storageRoot}/${vars.nfsShares.dockerDatabases.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.storageRoot}/${vars.nfsShares.nextcloudData.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.storageRoot}/${vars.nfsShares.raspiVolumes.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.storageRoot}/${vars.nfsShares.proxmoxIsos.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.storageRoot}/${vars.nfsShares.proxmoxLxcImages.subpath} ${vars.lanCidr}${vars.nfsShares.options}
${vars.storageRoot}/${vars.nfsShares.pxebootImages.subpath} ${vars.lanCidr}${vars.nfsShares.options}
'';
exports = mkNfsExports vars.storageRoot;
};
# mountd (20048) is needed for showmount/NFSv3 mount protocol — without it
+4 -47
View File
@@ -1,50 +1,7 @@
{ config, pkgs, lib, vars, ... }:
_:
let
# Flake attribute names are now <platform>-<buildtype> (e.g. proxmox-docker)
# and no longer match networking.hostName, since a host's hostname stays
# fixed while the platform backing it can change. Each nixosConfiguration
# stamps its own active target name into /etc/flake-target at build time.
mySwitchCmd = ''
sudo nixos-rebuild switch \
--no-write-lock-file \
--refresh \
--flake git+https://${vars.lanDomain}/beatzaplenty/nixos.git#$(cat /etc/flake-target)
'';
myTestCmd = ''
sudo nixos-rebuild test \
--no-write-lock-file \
--refresh \
--flake git+https://${vars.lanDomain}/beatzaplenty/nixos.git#$(cat /etc/flake-target)
'';
# lxc-* hosts pre-seed their SSH host key at build time (see
# modules/platforms/lxc.nix) so sops-nix's .sops.yaml recipient matches on
# first boot -- without it, secrets permanently fail to decrypt (see that
# file's comment for the confirmed failure). That requires --impure plus
# NIXOS_HOST_KEYS_DIR pointing at the repo's host-keys/ dir, same pattern
# docs/auto-installer.md uses for the installer ISO. A function, not a
# shellAlias, since the target name has to interpolate into the middle of
# the flake attribute path, not just append after it. Must be run from the
# repo root, same as every other host-keys/ command in this repo.
buildImageFn = ''
buildImage() {
if [ -z "$1" ]; then
echo "usage: buildImage <flake-target> (e.g. lxc-docker)" >&2
return 1
fi
NIXOS_HOST_KEYS_DIR="$(pwd)/host-keys" nix build --impure \
".#nixosConfigurations.$1.config.system.build.tarball"
}
'';
in
{
programs.bash = {
enable = true;
shellAliases = {
"Switch-nix" = mySwitchCmd;
"Test-nix" = myTestCmd;
};
initExtra = buildImageFn;
};
# Switch-nix, Test-nix, and buildImage are defined system-wide in
# modules/common/configuration.nix so all users (including IPA accounts)
# get them. Add any Home-Manager-only per-user shell config here.
}
+36 -8
View File
@@ -1,17 +1,45 @@
{ config, lib, pkgs, vars, ... }:
let
switchCmd = ''
sudo nixos-rebuild switch \
--no-write-lock-file \
--refresh \
--flake git+https://${vars.lanDomain}/beatzaplenty/nixos.git#$(cat /etc/flake-target)
'';
testCmd = ''
sudo nixos-rebuild test \
--no-write-lock-file \
--refresh \
--flake git+https://${vars.lanDomain}/beatzaplenty/nixos.git#$(cat /etc/flake-target)
'';
buildImageFn = ''
buildImage() {
if [ -z "$1" ]; then
echo "usage: buildImage <flake-target> (e.g. lxc-docker)" >&2
return 1
fi
NIXOS_HOST_KEYS_DIR="$(pwd)/host-keys" nix build --impure \
".#nixosConfigurations.$1.config.system.build.tarball"
}
'';
in
{
imports =
[
# Include the results of the hardware scan.
# ./hardware-configuration.nix
imports = [
./set-locale.nix
../ipa/client.nix
];
# Use the GRUB 2 boot loader.
# boot.loader.grub.enable = true;
#boot.loader.grub.device = "/dev/sda"; # or "nodev" for efi only
networking.networkmanager.enable = true; # Easiest to use and most distros use this by default.
# System-wide shell config so all users (including IPA accounts) get the
# same management aliases as the local nixos user's Home Manager provides.
programs.bash = {
shellAliases = {
"Switch-nix" = switchCmd;
"Test-nix" = testCmd;
};
interactiveShellInit = buildImageFn;
};
networking.networkmanager.enable = true;
# Recommended over the true default (bypasses ZFS's own import safeguards)
# per the option's own docs; matches hosts/docker/host.nix and
+35
View File
@@ -0,0 +1,35 @@
# Shared activation-script logic to preserve the SSH host key across
# nixos-rebuild on platforms that embed the key via environment.etc (lxc and
# proxmox). When NIXOS_HOST_KEYS_DIR is not set the key is absent from
# environment.etc, and NixOS's etc activation removes any /etc file not in
# the new generation — which would destroy the live key and break sops-nix
# decryption permanently. These scripts save the key to /run before etc
# removes it, then restore it afterward.
#
# Explicit deps enforce the correct ordering: without them the topological
# sort places preserveSshHostKey after etc (confirmed live on lxc-tor-relay:
# position 7 vs etc's position 5), so the key is gone before it can be saved.
_: {
system.activationScripts = {
preserveSshHostKey = ''
if [ -f /etc/ssh/ssh_host_ed25519_key ]; then
cp /etc/ssh/ssh_host_ed25519_key /run/sshd-host-key-preserve.tmp
cp /etc/ssh/ssh_host_ed25519_key.pub /run/sshd-host-key-preserve.pub.tmp
fi
'';
restoreSshHostKey = {
deps = [ "etc" ];
text = ''
if [ ! -f /etc/ssh/ssh_host_ed25519_key ] && [ -f /run/sshd-host-key-preserve.tmp ]; then
install -m 0600 /run/sshd-host-key-preserve.tmp /etc/ssh/ssh_host_ed25519_key
install -m 0644 /run/sshd-host-key-preserve.pub.tmp /etc/ssh/ssh_host_ed25519_key.pub
fi
rm -f /run/sshd-host-key-preserve.tmp /run/sshd-host-key-preserve.pub.tmp
'';
};
etc = { deps = [ "preserveSshHostKey" ]; };
setupSecrets = { deps = [ "restoreSshHostKey" ]; };
};
}
+2 -12
View File
@@ -1,21 +1,11 @@
{ pkgs, ... }:
{ pkgs, vars, ... }:
{
# virtualisation.docker.enable = true;
virtualisation.docker = {
enable = true;
package = pkgs.docker;
# listenOptions = [
# "unix:///var/run/docker.sock"
# "tcp://0.0.0.0:2375"
#];
# daemon.settings = {
# metrics-addr = "0.0.0.0:9323";
# experimental = true;
# };
};
users.users.${vars.primaryUser}.extraGroups = [ "docker" ];
environment.systemPackages = with pkgs; [
docker-compose
docker-buildx
+188
View File
@@ -0,0 +1,188 @@
# Fully declarative FreeIPA domain membership.
#
# Imported by modules/common/configuration.nix — no per-host wiring needed.
# Enables itself automatically on any host that has a sops-encrypted keytab
# at secrets/<hostname>.keytab; is a no-op for all other hosts.
#
# To enroll a new host:
# 0. scripts/secrets/sync-host-keys.sh <flake-target>
# 1. scripts/ipa/create-nixos-ipa-host-account.sh [--ip <addr>] <hostname>
# (adds .sops.yaml rule, runs ipa host-add, encrypts keytab in one step)
# 2. git add secrets/<hostname>.keytab .sops.yaml && git commit
# 3. Deploy — no further steps required.
#
# Manual fallback (if the script isn't usable):
# a. On the FreeIPA server: ipa host-add <fqdn> [--ip-address=<ip>] --force
# b. On the FreeIPA server: ipa-getkeytab -s <ipa-server> -p host/<fqdn> -k /tmp/<host>.keytab
# c. From the repo root (path must match for sops creation rule to apply):
# cp /tmp/<host>.keytab secrets/<host>.keytab
# sops -e --input-type binary -i secrets/<host>.keytab
# d. Commit secrets/<host>.keytab and the updated .sops.yaml, then deploy.
#
# vars dependencies: homeDomain, ipaServer, domainControllerIp, ipaUser
{ config, lib, pkgs, vars, ... }:
let
keytabPath = ../../secrets + "/${config.networking.hostName}.keytab";
enabled = builtins.pathExists keytabPath;
realm = lib.strings.toUpper vars.homeDomain;
fqdn = "${config.networking.hostName}.${vars.homeDomain}";
# "sweet.home" -> "dc=sweet,dc=home"
basedn = lib.strings.concatMapStringsSep "," (c: "dc=${c}") (lib.strings.splitString "." vars.homeDomain);
# security.ipa.certificate expects a derivation (package), not a raw path.
caCertPkg = pkgs.writeText "ipa-ca.crt" (builtins.readFile ../../certs/ipa-ca.crt);
in
lib.mkIf enabled {
networking.domain = lib.mkDefault vars.homeDomain;
networking.nameservers = lib.mkDefault [ vars.domainControllerIp ];
security.ipa = {
enable = true;
domain = vars.homeDomain;
inherit realm;
server = vars.ipaServer;
certificate = caCertPkg;
inherit basedn;
ipaHostname = fqdn;
offlinePasswords = true;
cacheCredentials = true;
};
# Fetch SSH public keys from IPA so users can log in with the key stored
# in their IPA profile rather than needing ~/.ssh/authorized_keys on every
# host. sss_ssh_authorizedkeys queries SSSD (which queries IPA LDAP).
#
# /nix/store is 1775 (group-writable by nixbld). OpenSSH 10.0+ rejects
# AuthorizedKeysCommand binaries whose path contains any group-writable
# component, silently skipping the command. Copy to /usr/local/bin (all
# components root-owned, 755) so the path passes sshd's safety check.
systemd.tmpfiles.rules = [
"d /usr/local 0755 root root - -"
"d /usr/local/bin 0755 root root - -"
"C+ /usr/local/bin/sss_ssh_authorizedkeys 0555 root root - ${pkgs.sssd}/bin/sss_ssh_authorizedkeys"
# Pre-create the IPA user's home dir so Home Manager activation succeeds
# even before their first login. On a fresh system SSSD may not have
# resolved the user yet — tmpfiles warns and skips in that case (non-fatal),
# and pam_mkhomedir covers the first-login path as a fallback.
"d /home/${vars.ipaUser} 0700 ${vars.ipaUser} ${vars.ipaUser} - -"
];
services.openssh.extraConfig = ''
AuthorizedKeysCommand /usr/local/bin/sss_ssh_authorizedkeys %u
AuthorizedKeysCommandUser nobody
'';
# Create the home directory on first login if it doesn't exist yet.
# IPA users have no pre-created home on the host; without this sshd
# opens a session to a non-existent directory and resets the connection.
security.pam.services.sshd.makeHomeDir = true;
# Host keytab: pre-provisioned on the IPA server, sops-encrypted binary.
# Placed at /etc/krb5.keytab before SSSD starts so the host authenticates
# to IPA without running ipa-client-install.
sops.secrets."ipa-host-keytab" = {
sopsFile = keytabPath;
format = "binary";
path = "/etc/krb5.keytab";
owner = "root";
group = "root";
mode = "0600";
restartUnits = [ "sssd.service" ];
};
# security.ipa enables Kerberos (security.krb5) which causes systemd to
# start auth-rpcgss-module.service and rpc-gssd.service for Kerberos NFS
# authentication. LXC containers can't load the auth_rpcgss kernel module
# and don't have /var/lib/nfs/rpc_pipefs, so both services fail.
#
# The NixOS IPA module already adds a drop-in for auth-rpcgss-module.service
# with ConditionPathExists=/etc/krb5.keytab. We use lib.mkForce to win the
# text conflict and add ConditionVirtualization=!container alongside it so
# the service is skipped (not failed) in containers that do have a keytab.
# Same fix for rpc-gssd.service which also fails in containers.
systemd.units = lib.mkIf config.boot.isContainer {
"auth-rpcgss-module.service" = {
overrideStrategy = "asDropinIfExists";
text = lib.mkForce ''
[Unit]
ConditionPathExists=
ConditionPathExists=/etc/krb5.keytab
ConditionVirtualization=!container
'';
};
# rpc-gssd also has ConditionPathExists from the NixOS IPA module (and an
# X-Restart-Triggers store path from systemd.nix). Use mkForce to win;
# omit X-Restart-Triggers since this service is skipped in containers anyway.
"rpc-gssd.service" = {
overrideStrategy = "asDropinIfExists";
text = lib.mkForce ''
[Unit]
ConditionPathExists=
ConditionPathExists=/etc/krb5.keytab
ConditionVirtualization=!container
'';
};
};
# Home Manager config for the IPA primary user, applied on every enrolled
# host. Manages what IPA doesn't: dotfiles, user-scoped packages, session
# variables. Switch-nix/Test-nix/buildImage are system-wide (configuration.nix)
# so they don't need to be repeated here.
# NixOS requires isNormalUser/isSystemUser + group on any entry in
# users.users. HM with useUserPackages = true (set in flake.nix) adds a stub
# entry for each HM user so it can install packages to
# /etc/profiles/per-user/<name>/. This definition satisfies those assertions.
# With security.ipa setting "passwd: sss files" in nsswitch, SSSD's IPA entry
# takes priority for NSS lookups — this local stub is only a fallback when
# SSSD is unreachable (at which point auth fails anyway).
# HM with useUserPackages = true (flake.nix) sets users.users.${ipaUser}.packages,
# which forces the stub into /etc/passwd. pam_sss.so with the "localusers" flag
# (added by NixOS when SSSD is enabled) then skips SSSD for any user it finds in
# local /etc/passwd — including this stub — falling through to pam_unix, which has
# no password for the stub → sudo auth always fails.
#
# Fix: NOPASSWD for the IPA user. The IPA user already authenticated to reach a
# shell (SSH public key from IPA or Kerberos), so re-prompting via a broken PAM
# path is security theater on a single-admin homelab.
users.users.${vars.ipaUser} = {
isNormalUser = true;
group = "users";
extraGroups = [ "wheel" ];
createHome = false;
};
# home-manager-<user>.service fails on first enrollment because /home/wayne
# doesn't exist until the user's first login (pam_mkhomedir creates it then).
# ConditionPathExists makes systemd skip the service (exit 0, condition not
# met) instead of failing. After first login the dir exists and subsequent
# rebuilds activate HM normally.
systemd.services."home-manager-${vars.ipaUser}".unitConfig.ConditionPathExists =
"/home/${vars.ipaUser}";
security.sudo.extraRules = [{
users = [ vars.ipaUser ];
commands = [{ command = "ALL"; options = [ "NOPASSWD" ]; }];
}];
# Home Manager config for the IPA primary user, applied on every enrolled
# host. Manages what IPA doesn't: dotfiles, user-scoped packages, session
# variables. Switch-nix/Test-nix/buildImage are system-wide (configuration.nix)
# so they don't need to be repeated here.
#
# homeDirectory uses mkForce because HM's NixOS integration module sets it to
# "/var/empty" for users not found in config.users.users at eval time (SSSD
# users aren't visible there).
home-manager.users.${vars.ipaUser} = { pkgs, ... }: {
home = {
username = vars.ipaUser;
homeDirectory = lib.mkForce "/home/${vars.ipaUser}";
stateVersion = "26.05";
packages = with pkgs; [ tmux sshfs ];
sessionVariables.EDITOR = "nano";
};
programs.home-manager.enable = true;
programs.bash.enable = true;
};
}
+1 -43
View File
@@ -52,6 +52,7 @@ in
# LXC container does).
imports = [
(modulesPath + "/virtualisation/proxmox-lxc.nix")
../common/preserve-ssh-host-key.nix
];
proxmoxLXC = {
@@ -105,49 +106,6 @@ in
};
};
# NixOS's etc activation removes any /etc file that was in the previous
# generation's environment.etc but is absent from the current one — even
# real (non-symlink) copies. On every routine nixos-rebuild switch/test that
# lacks NIXOS_HOST_KEYS_DIR the key is absent from environment.etc, so it
# gets removed as "obsolete". sops-nix derives its age decryption key from
# /etc/ssh/ssh_host_ed25519_key; deletion cascades into every sops secret
# failing with "Error getting data key: 0 successful groups required, got 0".
#
# Fix: activation scripts that bracket the etc step, with explicit deps
# to enforce the correct ordering. Without deps the topological sort places
# preserveSshHostKey AFTER etc (confirmed live on a deployed lxc-tor-relay:
# position 7 vs etc's position 5) -- the key is already gone by the time it
# tries to save it. The etc/setupSecrets entries ADD to existing deps
# (types.listOf concatenates across module definitions).
system.activationScripts = {
# Saves the live key to /run before etc can delete it.
preserveSshHostKey = ''
if [ -f /etc/ssh/ssh_host_ed25519_key ]; then
cp /etc/ssh/ssh_host_ed25519_key /run/sshd-host-key-preserve.tmp
cp /etc/ssh/ssh_host_ed25519_key.pub /run/sshd-host-key-preserve.pub.tmp
fi
'';
# Reinstalls the key after etc runs if it was removed as "obsolete".
# The resulting file is not registered in environment.etc for either
# generation, so subsequent rebuilds leave it alone permanently.
restoreSshHostKey = {
deps = [ "etc" ];
text = ''
if [ ! -f /etc/ssh/ssh_host_ed25519_key ] && [ -f /run/sshd-host-key-preserve.tmp ]; then
install -m 0600 /run/sshd-host-key-preserve.tmp /etc/ssh/ssh_host_ed25519_key
install -m 0644 /run/sshd-host-key-preserve.pub.tmp /etc/ssh/ssh_host_ed25519_key.pub
fi
rm -f /run/sshd-host-key-preserve.tmp /run/sshd-host-key-preserve.pub.tmp
'';
};
# Force etc to wait until the key is saved, and sops to wait until the
# key is restored. Without these the topological sort breaks the chain.
etc = { deps = [ "preserveSshHostKey" ]; };
setupSecrets = { deps = [ "restoreSshHostKey" ]; };
};
# virtualisation/proxmox-lxc.nix (imported above) registers the Nix
# store DB via a systemd service (register-nix-paths) -- it never runs
# an activation script at all. Confirmed live this means neither
+1 -32
View File
@@ -34,6 +34,7 @@ in
../hardware-configuration/vm/proxmox.nix
../boot/efi.nix
../disko/proxmox.nix
../common/preserve-ssh-host-key.nix
];
environment.etc = lib.mkIf hasKeyForThisTarget {
@@ -46,36 +47,4 @@ in
mode = "0644";
};
};
# NixOS's etc activation removes any /etc file that was in the previous
# generation's environment.etc but is absent from the current one. Since
# the SSH key is only in environment.etc during the --impure build (when
# NIXOS_HOST_KEYS_DIR is set), normal rebuilds would remove it as
# "obsolete". These scripts mirror lxc.nix's approach: save the live key
# before etc runs, restore it after. Without the explicit deps, the
# topological sort places preserveSshHostKey after etc (confirmed live on
# lxc-tor-relay: position 7 vs etc's position 5), so the key is gone
# before it can be saved.
system.activationScripts = {
preserveSshHostKey = ''
if [ -f /etc/ssh/ssh_host_ed25519_key ]; then
cp /etc/ssh/ssh_host_ed25519_key /run/sshd-host-key-preserve.tmp
cp /etc/ssh/ssh_host_ed25519_key.pub /run/sshd-host-key-preserve.pub.tmp
fi
'';
restoreSshHostKey = {
deps = [ "etc" ];
text = ''
if [ ! -f /etc/ssh/ssh_host_ed25519_key ] && [ -f /run/sshd-host-key-preserve.tmp ]; then
install -m 0600 /run/sshd-host-key-preserve.tmp /etc/ssh/ssh_host_ed25519_key
install -m 0644 /run/sshd-host-key-preserve.pub.tmp /etc/ssh/ssh_host_ed25519_key.pub
fi
rm -f /run/sshd-host-key-preserve.tmp /run/sshd-host-key-preserve.pub.tmp
'';
};
etc = { deps = [ "preserveSshHostKey" ]; };
setupSecrets = { deps = [ "restoreSshHostKey" ]; };
};
}
+8
View File
@@ -19,6 +19,14 @@
# tailnet-specific subdomain (vars.tailnetDomain) instead.
services.dnsmasq = {
enable = true;
# NixOS's dnsmasq module defaults resolveLocalQueries to true, which adds
# 127.0.0.1 to networking.nameservers and makes dnsmasq bind to
# listen-address=127.0.0.1. This instance is not the host's local
# resolver — it only serves IPA's conditional forwarder for tailnet names.
# The host uses domainControllerIp directly (networking.nameservers in
# host.nix). Without this, all host DNS goes through dnsmasq, which has
# no upstream for general queries (no-resolv=true), breaking resolution.
resolveLocalQueries = false;
settings = {
# Listen only on the LAN interface — not tailscale0 or loopback.
# bind-interfaces prevents dnsmasq from binding to 0.0.0.0 and
+11
View File
@@ -88,6 +88,17 @@ export NIX_CACHE_HOST
: "${LAN_DOMAIN:=gitea.lan.ddnsgeek.com}"
export LAN_DOMAIN
# Matches variables.nix's homeDomain -- the base LAN domain for service
# subdomains, FreeIPA Kerberos realm, and host FQDNs.
: "${HOME_DOMAIN:=sweet.home}"
export HOME_DOMAIN
# Matches variables.nix's ipaServer -- the FreeIPA server hostname.
# scripts/ipa/create-nixos-ipa-host-account.sh SSHes here to run
# ipa host-add and ipa-getkeytab.
: "${IPA_SERVER:=domain-controller.sweet.home}"
export IPA_SERVER
# nix_extra_opts: call as a plain statement (NOT inside $(...)/<(...) --
# that forks a subshell, and the whole point is exporting a decision back
# into *this* shell) to populate the global NIX_OPTS array with whatever
+303
View File
@@ -0,0 +1,303 @@
#!/usr/bin/env bash
# Add a NixOS host to the FreeIPA domain and produce a sops-encrypted keytab
# at secrets/<hostname>.keytab, ready for modules/ipa/client.nix.
#
# One command replaces three error-prone manual steps:
# 1. ipa host-add on the domain controller
# 2. ipa-getkeytab on the domain controller + SCP back
# 3. sops encrypt in-place (must be at secrets/<hostname>.keytab for
# the creation rule to match -- the common mistake that breaks sops)
#
# Usage:
# scripts/ipa/create-nixos-ipa-host-account.sh [options] <hostname>
#
# Arguments:
# <hostname> Short hostname, e.g. "tailscale-router". The FQDN is
# derived as <hostname>.<HOME_DOMAIN>.
#
# Options:
# --ip <addr> Register this IP with the IPA host record (optional).
# --dc <host> SSH to this host to run IPA commands.
# Default: $IPA_SERVER (from env.sh / environment).
# --dc-user <u> SSH user on the domain controller. Default: wayne.
# --dry-run Print what would be done without making any changes.
# -h, --help Show this message.
#
# Prereqs:
# 1. Run from the repo root (so .sops.yaml and secrets/ are found).
# 2. SSH access to the domain controller as --dc-user (default: wayne)
# with passwordless sudo (or sudo cached). IPA commands and kinit run
# as root via sudo so the Kerberos ticket is in root's cache where all
# ipa tools expect it. If there's no valid ticket, the script runs
# `sudo kinit admin` interactively — you'll be prompted for the IPA
# admin password once. The password never touches this script.
# 3. The host's age key(s) must already be in .sops.yaml. Run
# scripts/secrets/sync-host-keys.sh <flake-target> first so the host
# can decrypt its own keytab on boot. This script adds the .sops.yaml
# creation rule for secrets/<hostname>.keytab automatically, but the
# host age key anchor (&lxc-<hostname> etc.) must already exist —
# otherwise only the admin key can decrypt the keytab and the deployed
# host will fail to read it.
# 4. sops in PATH, or Nix available to run it via `nix run`.
set -euo pipefail
SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
REPO_ROOT="$(cd "$SCRIPT_DIR/../.." && pwd)"
# shellcheck source=../env.sh
source "${SCRIPT_DIR}/../env.sh"
# --- Argument parsing ---
DC_HOST="${IPA_SERVER}"
DC_USER="wayne"
IP_ADDR=""
DRY_RUN=false
TARGET=""
usage() {
sed -n '/^# Usage:/,/^[^#]/{ /^#/{ s/^# \?//; p } }' "$0"
exit "${1:-0}"
}
while [[ $# -gt 0 ]]; do
case "$1" in
--ip) IP_ADDR="$2"; shift 2 ;;
--dc) DC_HOST="$2"; shift 2 ;;
--dc-user) DC_USER="$2"; shift 2 ;;
--dry-run) DRY_RUN=true; shift ;;
-h|--help) usage 0 ;;
-*) echo "Unknown flag: $1" >&2; usage 1 ;;
*)
if [[ -n "${TARGET}" ]]; then echo "Unexpected argument: $1" >&2; usage 1; fi
TARGET="$1"; shift
;;
esac
done
if [[ -z "${TARGET}" ]]; then
echo "Error: hostname required." >&2
usage 1
fi
# Reject FQDNs passed by mistake — the script appends HOME_DOMAIN itself.
# "nixos.sweet.home" → FQDN would become "nixos.sweet.home.sweet.home".
if [[ "${TARGET}" == *"."* ]]; then
echo "Error: <hostname> must be the short name (e.g. 'nixos'), not a FQDN." >&2
echo " The FQDN is derived automatically as ${TARGET}.${HOME_DOMAIN}." >&2
exit 1
fi
FQDN="${TARGET}.${HOME_DOMAIN}"
KEYTAB_SECRET="${REPO_ROOT}/secrets/${TARGET}.keytab"
# Temp path on the domain controller — use a name that won't collide.
DC_TMP="/tmp/nixos-keytab-${TARGET}-$$.keytab"
# --- Helpers ---
log() { echo "==> $*"; }
logn() { echo " $*"; }
run() {
if $DRY_RUN; then
echo "[dry-run] $*"
else
"$@"
fi
}
dc_run() {
# Run a command string on the domain controller via SSH.
if $DRY_RUN; then
echo "[dry-run] ssh ${DC_USER}@${DC_HOST} $*"
else
ssh "${DC_USER}@${DC_HOST}" "$@"
fi
}
# --- Locate sops ---
if command -v sops &>/dev/null; then
SOPS_CMD=(sops)
else
log "sops not in PATH — will use 'nix run nixpkgs#sops'"
SOPS_CMD=(nix run "nixpkgs#sops" --)
fi
# --- Preflight checks ---
cd "${REPO_ROOT}"
[[ -f .sops.yaml ]] || { echo "Error: .sops.yaml not found — run from repo root." >&2; exit 1; }
[[ -d secrets ]] || { echo "Error: secrets/ not found — run from repo root." >&2; exit 1; }
# --- Step 1: Ensure .sops.yaml has a creation rule for this keytab ---
#
# sops matches creation rules against the PATH of the file being encrypted,
# not the output path. To match secrets/<hostname>.keytab, the file must
# already be at that path when sops -e -i is called. The creation rule must
# also exist at that point or sops will refuse with "no matching creation
# rules found."
log "Checking .sops.yaml for creation rule: secrets/${TARGET}.keytab"
RULE_EXISTS=false
# Match "path_regex: secrets/<hostname>...keytab" — using .*keytab rather
# than \.keytab because the file stores the regex verbatim (\.keytab = two
# chars: backslash + dot), which a BRE \. (= escaped literal dot) won't span.
if grep -q "path_regex: secrets/${TARGET}.*keytab" .sops.yaml 2>/dev/null; then
RULE_EXISTS=true
logn "Rule already exists — skipping addition."
fi
if ! $RULE_EXISTS; then
# Collect which platform-variant age anchors exist in .sops.yaml for this
# hostname. The keytab is platform-agnostic (same FQDN regardless of
# whether lxc/proxmox/linode variant is deployed), so all platform anchors
# that have been registered get added as recipients.
RECIPIENTS=("*admin")
for platform in lxc proxmox linode; do
anchor="${platform}-${TARGET}"
if grep -q "^ - &${anchor} " .sops.yaml; then
RECIPIENTS+=("*${anchor}")
fi
done
if [[ ${#RECIPIENTS[@]} -eq 1 ]]; then
echo "Warning: no platform age keys found for '${TARGET}' in .sops.yaml." >&2
echo " Run scripts/secrets/sync-host-keys.sh <flake-target> first," >&2
echo " otherwise only the admin key can decrypt the keytab and the" >&2
echo " deployed host won't be able to read it at boot." >&2
echo " Continuing with admin-only encryption..." >&2
fi
# Build the indented recipient list for the YAML block.
RECIPIENT_YAML=""
for r in "${RECIPIENTS[@]}"; do
RECIPIENT_YAML+=" - ${r}"$'\n'
done
RECIPIENT_YAML="${RECIPIENT_YAML%$'\n'}" # strip trailing newline
NEW_RULE="
# Host keytab for ${TARGET} FreeIPA enrollment (binary sops file).
# Generated by scripts/ipa/create-nixos-ipa-host-account.sh.
- path_regex: secrets/${TARGET}\\.keytab\$
key_groups:
- age:
${RECIPIENT_YAML}"
if $DRY_RUN; then
echo "[dry-run] Would append to .sops.yaml:"
echo "${NEW_RULE}"
else
logn "Adding creation rule (recipients: ${RECIPIENTS[*]})"
printf '%s\n' "${NEW_RULE}" >> .sops.yaml
logn "Added."
fi
fi
# --- Step 2: Add IPA host account (idempotent) ---
log "Adding FreeIPA host account: ${FQDN}"
# Ensure there's a valid admin Kerberos ticket on the DC.
# ipa host-add and ipa-getkeytab both need one. All IPA commands run via
# sudo so the ticket must be in root's cache — check and refresh as root.
# ssh -t allocates a PTY so kinit (and sudo if needed) can prompt normally;
# no password ever touches this script or the shell history.
if ! $DRY_RUN; then
if ! ssh "${DC_USER}@${DC_HOST}" "sudo klist -s" &>/dev/null; then
log "No valid Kerberos ticket on ${DC_HOST} — running sudo kinit admin"
ssh -t "${DC_USER}@${DC_HOST}" "sudo kinit admin"
if ! ssh "${DC_USER}@${DC_HOST}" "sudo klist -s" &>/dev/null; then
echo "Error: kinit admin failed or produced no valid ticket." >&2
exit 1
fi
else
logn "Kerberos ticket on ${DC_HOST} is valid."
fi
fi
IP_FLAG=""
[[ -n "${IP_ADDR}" ]] && IP_FLAG="--ip-address=${IP_ADDR}"
# --force: create the host record even if DNS doesn't resolve it yet.
if $DRY_RUN; then
echo "[dry-run] ssh ${DC_USER}@${DC_HOST} sudo ipa host-add '${FQDN}' ${IP_FLAG} --force"
else
HOST_ADD_OUT=$(ssh "${DC_USER}@${DC_HOST}" "sudo ipa host-add '${FQDN}' ${IP_FLAG} --force 2>&1") \
&& HOST_ADD_RC=0 || HOST_ADD_RC=$?
if [[ $HOST_ADD_RC -eq 0 ]]; then
echo "${HOST_ADD_OUT}"
elif echo "${HOST_ADD_OUT}" | grep -q "already exists"; then
logn "(host already registered)"
else
echo "Error: ipa host-add failed (exit ${HOST_ADD_RC}):" >&2
echo "${HOST_ADD_OUT}" >&2
exit 1
fi
fi
# --- Step 3: Fetch the keytab from the domain controller ---
log "Fetching keytab for host/${FQDN}"
# Remove the plaintext keytab if the script aborts before encryption completes.
# The trap is cleared at the end of step 4 once sops has encrypted it in-place.
trap 'rm -f "${KEYTAB_SECRET}"' EXIT
dc_run "sudo ipa-getkeytab -s '${IPA_SERVER}' -p 'host/${FQDN}' -k '${DC_TMP}'"
if $DRY_RUN; then
echo "[dry-run] Would stream ${DC_USER}@${DC_HOST}:${DC_TMP} → secrets/${TARGET}.keytab"
else
logn "Streaming keytab from ${DC_HOST}:${DC_TMP} → secrets/${TARGET}.keytab"
# scp can't read a root-owned temp file as ${DC_USER}; pipe through sudo cat instead.
ssh "${DC_USER}@${DC_HOST}" "sudo cat '${DC_TMP}'" > "${KEYTAB_SECRET}"
logn "Removing temp file on ${DC_HOST}"
dc_run "sudo rm -f '${DC_TMP}'"
fi
# --- Step 4: Encrypt in-place ---
#
# The file must already be at secrets/<hostname>.keytab (done above) so
# sops matches the creation rule by path. Using -i (in-place) rather than
# stdout redirect keeps the path intact through the encrypt call.
log "Encrypting secrets/${TARGET}.keytab in-place with sops"
run "${SOPS_CMD[@]}" -e --input-type binary -i "${KEYTAB_SECRET}"
# Encryption succeeded — the file is now sops-encrypted; cancel the cleanup trap.
trap - EXIT
# --- Done ---
if ! $DRY_RUN; then
echo ""
echo "Done. secrets/${TARGET}.keytab is sops-encrypted and ready."
echo ""
echo "Next steps:"
echo " 1. Verify: grep '\"data\": \"ENC' secrets/${TARGET}.keytab"
echo " 2. Stage and commit:"
echo " git add secrets/${TARGET}.keytab .sops.yaml"
echo " git commit -m 'secrets: add IPA keytab for ${TARGET}'"
echo " 3. Add to hosts/${TARGET}/host.nix (networking block and imports):"
echo ""
echo " networking = {"
echo " hostName = \"${TARGET}\";"
echo " domain = vars.homeDomain; # required for Kerberos FQDN"
echo " nameservers = [ vars.domainControllerIp ]; # IPA DNS"
echo " ..."
echo " };"
echo ""
echo " imports = ["
echo " (import ../../modules/ipa/client.nix {"
echo " keytabSopsFile = ../../secrets/${TARGET}.keytab;"
echo " caCertFile = ../../certs/ipa-ca.crt;"
echo " })"
echo " ];"
echo ""
echo " 4. Deploy: nixos-rebuild switch (or create-proxmox-resource.sh)"
fi
+26
View File
@@ -0,0 +1,26 @@
{
"data": "ENC[AES256_GCM,data://9IEHIVCfHjyMNao5sCu2zNlZ/CaW+JyxVpGpD/vab2qvURunCUY7eMfSOyvOx/2WPXnWWlkoVJPCR1ec/yUg09EaSMfxrvqlu4UJI3Sxvu9xNuDszMwMMD/sCulJDiMWFNLp8qaYt7UGzexp4+GlGiqWDxk3ZEu/iLmSApzBrpciTF0lfehT4qblDovo9QXG2KDWFhCt2SwEKmHJ61Yl3pVAQnPLyTWaNhwWD/mYL76mIiDVKq7DJlvi9MBxzi3aYh/ttuHgRCvnCL0C9oUvOyT2cljwra0LXuOrum7FhPIXXboA7WTEbTHJm1LB5yLfxDrnWCrGxQzFQAwNixVHIcjuvjjvA/LifTvbj5FYM8x7an+DwXPfPhruFrDew1paAWsEGNNYXSmAlju2QLI/OwLHFFLuDyLnBKQ6RLtZbCEAOUKf2h4iZj7nH86eb/aGU=,iv:rj76+MJBCpiYyx2Ogut5UxJj3Gn+bygvu2mtuY5hFLA=,tag:yQmTvWVu8ZLug/7fo6RnwA==,type:str]",
"sops": {
"age": [
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBqcURBS2tIMGl1aWxLMHFQ\nS3ZGVTE0cnYzTmpnQ0daL1F3QnlpemRCMmtjClJiZzIrc2syN29sRXVoaXlPRUNF\nakw4RndmbEduTFg5ZVRKUTVwRWpGRjgKLS0tIHZ5ZFlyODlGWTJoNGpXR3RhY0ZH\nOGpPdDZQVmt6UWZXbHkxQTBoeW1JencKbsfH1V1lUj8mmHyLNj36VaRDgaBojcDU\ndoQWmSEXxjticJqdadbVKb3UABpvzAZxASCy81sa3wH0gT+7zLaNyQ==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBrbFdaMmRjcHgyV3Y0eWZL\neG1uMEtpQVUxQmNTU0Z3aC95Zi9uQlgvMEhRCmJiVlRTR2NocGlnbVU1UmlLVVA2\neERiMXpiQlVPNVhRU09XVGxrY0Ixa2sKLS0tIFRuOHdoelJxOXNRRHBJNnlhSE9j\nUUZHZmQzOVFwRmhFV3pvdnpRMTMraGcKRHBuSUpbHaEzH2tuSBE5MsLJDCuH3vUx\nO0jnDldCWkCw7Wvr/tQAkaDI8axZcYVDUkCEk+xqAdxDozLCPhEO6g==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age17e89ty6p0fw24daanen57wg8uald9s025t3wwxsw269svwpmgvrshfvfvt"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBZMW5taXh2QkJkT0JjaVpq\nQlBjVFpFYUhXTHhOT3prbFcvUFB0YnRGUzMwCjhHT01lY3dPWDE2dDZWZnJza1hN\nS1AvZWIvdjZoYmRjWlliK1hiOEdrT00KLS0tIDljWWY0NlQveS9VR2hOSUNyTUtH\nK2gvbEVibmZSdktPemdEQ2p5U0Y4d2MKKitoTi2vbxJ41IoWMlj4vO91Ahpj0hHP\nrKCPyx7ws/IUMmKGyvDLpZ3pYqHD9jl5pLfB05Hh4Emhv4lA1qtwwQ==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age17jqc66x9yeshfgd9v78mj483r4zzarqdtuxtrkxe4x5mw679gphshd94th"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA3K2dVV1BHbDk2Z3FhNmdV\nZEN2Um94K0pma1k4b1V5ZUJxQ1hWU1grZjJNCi9iRVVqOVpEMmtBUi80NThlYldY\nTUtZOVErT2VSWk43NndpVzBlL1lQaTgKLS0tIEpCM3Q4NjM3N1lpUE56N04rTXN0\nZkZ6TkV1TU9OV3dpc25RNWRpVnprM00KItUzKBdShakOfX8Sr+k906nsvYPl8QLb\nge//1GA+ukGsaS9rcChOY89vFdm61JDmj1jXSJ0CN4wLMW9/eblZRw==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1arhf2q45zw6wf2uevju4savp575x3m2tfvved5zzq3ay92ynua9s3cm92c"
}
],
"lastmodified": "2026-07-28T01:44:28Z",
"mac": "ENC[AES256_GCM,data:efFXIqbauOURR7lrVpK7kqRIPgYjgWfenBYoX7mUrQ/thFc+ApcAx58Fi1zg4biwIs7NarJAgDqAxZi+yKb2Sll8H/wlsEjWDU4iQlLJdIQw7wey9eDW8pgBLd+6E7FXrgn1Vh49dS5GXlC6clAYk1lCiB4NvfzPDy5Ktpl+Chs=,iv:+zCqj5I1MLJfRRiIrqgocYB49PZnlV45PUTH4gYlfrQ=,tag:WxY1sF4kFOTEzbSFcfJFbQ==,type:str]",
"version": "3.13.2"
}
}
+26
View File
@@ -0,0 +1,26 @@
{
"data": "ENC[AES256_GCM,data:z2bazlADvtWkGcY4an7NgZgIDSDq8KmYpSq8tcBleW/33HlElMNhdmje8m8hd7WxgrVvCQDdlAfodBLj2mjbgSwBptlPX2zbwcmJdm0g0Ope+YyQZucIio7NnBaYa+OK8meWqmxO2WEeOk+hnNfNPbt8MkzF/FMMbP8xv9wSTKP9CDdmO7s8rdg8G1JxVfn9dyaSDUTuA2JGNtbh+osd4CtNCV/bc84MjXDZTgTfT0W/uv8VH3iPNT7BhQbU9FIY4dsFRYBf758VtJ+3mTBiQkR38IevJBvhFB7Wiqn118LSBgjdTKJnBwmGo6lMdo0LRYHEgUnb2ejhWMNie19x+LEAErDki0RBmjc2BbnOF908kUlW2fUPo5fz/hlfqlhDLS1uOxESKhfnKt7s5qzWiMX/nohpknVfyMbmu9j/M571z9sgFnJAylpW3NLp53lX8N9mINwRGXsyL/ijbNE=,iv:M/MNquAGN+lIIyVVvFRgKR6DKAhLclc/OY1HV5Xwoog=,tag:eEuURMErSqsoh+l9ZaHY9Q==,type:str]",
"sops": {
"age": [
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBqZlUxRG0zR3IzMlpDL3Vl\nNmRWQXUvc1NDek5wbWtKVEFTcTlxL3ZoWldNCmJVMkFtbDkxN1FGQ2VLTlhBUW5Q\nZ3VzL0UydUQ2YnlUMmtqa1Z0d0FSVFUKLS0tIGJFelc4Rm84T3ZHSGZDdnNUbUFM\nRXZHV3N3aVlSOXhUZk04UFRMWU5TbFUKhPU80PVYuDFUCxu1CA8+W8bqkr+Ne2fh\n+nBUPJbGxfN9TyD9tUC77AMbcL1R2L5x+SSAh0bEgSWE24/RjsuVKw==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSB3M1o3S2FibHV6N2tIOFEx\nRytJRDFIUU05azNDbWlpaDdFQXFRWlBUNnlFCnBwNVB0SEVwL3NWNS9aeG4xSUI1\nV3NOcUFxUUhaODYyWXdFMEhWeFpvancKLS0tIHY4NHFQRGJwUURQbWZ2cGlSdm9s\nOFJodGZkekk3UnBRRUwxb2YrQ1ZPcU0K0tCapb1hfVHFSNpmESXexYa5k9OE9Tha\n51QpU4mZHKGrnWPK/kyj7rHiz95TLsmwUdA8Q2hOiYNSxEaVBjYDQw==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1jcx3yajjhghn8qh8za3yeu8nxykzlg3p4nrv03vnfvzl0mzayg2qmg940e"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBkTmNrbUFoVFVGcytzQkk1\nMUxDdmJGL0xDcUNZaDFRQnUwNXoyMU90SEVvCi9EaTlVOGlMeUZtQzRJS1J2TTJY\neWdkMGNFMWZzQXVKOU5KcXVvalk1ekkKLS0tIDN2MlRQcG5aQnN3bUMrSDdvc09X\nM29hQ0pJRzk1amRHaS9mRlhrb2FMZG8KEWkSSP+MqGRU75qo7ctOCL7qHhyCM3l4\nL+ga1XOKxRsQkKQPozCi5Bm+k28W9hIDaC34Rw9difxICM9Z1rAbOA==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1ufg390ydrmma849t9xfkxxl5xvdkk6mngnlzhmy7mvuaje8sgcmsmnq6l7"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA1TUtxVjJ2STFpU3RNdWpJ\nVjcwUHVORVN6L1pKVC9TeWt4cTNoR2pPWVRBCkR4QVJ1bHFUa2Z5aWw1bG0vQWVy\ncjNGRDl5REZzbzdZWTFMRkU1eHFTc1kKLS0tIHNLVDFiRkRKTHhrSEx2S0J1R3cx\nSkdEQWJya1ptTTRqUjJZT3FFaFhkd0kKgecHrnzW9+Eb+b7c0z1yR+Y0Czsr9Kjh\nx1UUOfleHntJUCs8oYcOogKknEnhBJJoJ5oe/gWruRSwle1fs3cBqQ==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1jlltcv5jcnm40z5k0q6hv053k2rqpqvemtuecdwn527uw8uqz4es3x7m68"
}
],
"lastmodified": "2026-07-27T21:22:58Z",
"mac": "ENC[AES256_GCM,data:VG2ygV4X6yMxGlJgq3sN4GAzgVqiD06noyMxB2yb/FCmiFVYZAH/9LqF//G7MTInfIjFrTDyoHAny+m/ztUrJkHXI1Fzg0U8R/zYyQ6wj/GguL0gyhA70uriQhvHsRHefHPa7Km61Blo9cME6CBJWejtRvh1IMw9itAioVrSIZE=,iv:zjxNG6IYxkcNqLk08NADoDiIbS6at86y136SBzadW1U=,tag:sj4ZRR7ixU8h7aOUJmTCYg==,type:str]",
"version": "3.13.2"
}
}
+30
View File
@@ -0,0 +1,30 @@
{
"data": "ENC[AES256_GCM,data:apiijrtrqd77CTizITg0R35BfCi8PBnufpxIyC+hLYqwoBzP//3z/yjFyHPLG98m/c/qywoi3Kn+zsaTT7MjP++9OMhhX94YKlSHV1/cHB76OkwsNc+ClqWxl6vpaFX29Qvh3gFX9c/NR3xvYQutYwrIrQ9NR+t/M52IMC8hvtR1LQy0ak3VIuXJlSnG2r4kF2Ym1iP7phjuq39Gd245Axzw8OB7yGvOjNxSdTPxW/qL0fMlzNcMrjr9hw15WlqnZfWPOsB1+gZjHXpGfPD5BCbAAMoTRJd75vhKKXP/ERhIffewuuH2x/QHfSFvXVB3QyhBQMxd2b8QEEE5cjvcExOST3tkj6QARkzoUpRT7AE3jhl3XZ0uA2qu9SwyrSvbr0tBRKxCdK0g2E2/hqwcK/Tck5GB1eKb4aN+UkqxOblNDH+B1RfDoyNAuN+KEg==,iv:0p+ScrKpP4kQvO52gBAlwAis6oAzZ0EHFnU74hYPrn4=,tag:ON7qOjztF52xsJWAou7ogg==,type:str]",
"sops": {
"age": [
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBlYXB3cVAzb2xEZ2pGa1RJ\nbS9ZVTc4Ums5eUZJUjEvd1g1aGVyNUNramowCnptZXFOZVB3MFRFcUtzSXBEZk1B\neEtKcDdLS0h0b1h3VjRjRXRvV3V5V3MKLS0tIHBDemkyUnV6ZXhTeE5VOVVOMlky\nWWMzVGVzZlAxMjZYUGpQUCs5QmxiYkkKcuBshCgWX4TwfVlQ5lHikzvwWdLEXWD1\n/uSiy0J6yMSiu8u6cg2SxeFrlKJ3j47dDlT6WHCxS0PfeEA0bJb3LA==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBGa2VTc2NWdkFRNUJxelVR\nWFk4RWxoelYzNHo1UFVhU2ZkLzEySlRWN2xNCmNmcmJod2crL3NMRlVsSmpmVkU2\nMjlXMktjc3piUVNhUXlTdnVGTWJkUTQKLS0tIGQrMUxrNDlNTkRCSUtFWkxRdXgw\nRlV4ZmtYSGhPQU84eWtiQXVqTmxUK3cKk5fn72UZPH68t5ZappfAhZJwzpLkfKmT\ny9TbUPIr4Pbrexau6YiH43QIbDQFdwYPfkBjGkd57zCg8AVo1+MBRw==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1adur9g330gua4l6ndk8cqjg35qc8yxwgme6wrl2hpylcc7vxm38q05ejuy"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSArNWkwQXFWT1RpaDNvbzYy\nQWc1aHhmNHFEUXVsQjZqb0EzM0wrV0dwN1hnCjFsUFJiT3REK05uSGRWTEw2SFE4\nY1FleE1XVjhBbndiMmZxTWNTYmhYeVEKLS0tIEJiZzJvS3BsYzB3cHIxa2k5N1Ro\nenFFZDVaODNnVGdBZTBOYWJwRjQzc1kKlXJgee8wTSN4Beq4P0t9cYbk0BWHCseQ\nyaWpiPT9aZBEGLFmuEd3zKABc8lrilX/ySTmOG49vRg6CPmr7cT0Wg==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1rrxqea6q6pn39sw8y5te63h2py8jgjl9v0jyper86w3ggtn67upqg3ah39"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBEa0JYenFMNmNzWnVmcXdz\ndG90ZUZ0WWlIU0FCZG9OaWpBM3ZDWnFhZFhNCjhuV1FTOTJ2WVJGa2RuNVV2MjR0\naVNXa3diaWxWUlJtdkNOQXZ2R2NsQkUKLS0tIDcyYXh3N3B2QmNiK3dzemFFMGV1\nNTZpTk5yNGV5YVo3cGswK0NLWFQxQlEKIe0N5OxooWXzt1cUViBmjihmGEe3G6/f\nkz2/IscnG78ZvNgYKjdoG1jlsyje/3zI4C8aWXLq2DnIyxUyAhPgsQ==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age19mn8zrxl8zpps9yvrh4euquvygpp4fp8queg7xc6qhtnl4ng8c9qx02qwn"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSB2b0NVVm9QNm9waUUzcXBi\nWnZWU0JETjZRZmprZVRUL1h6ZHB4cXkrdm5rCm9GZ0VnTXB3S1BYSmlGWFJVcDhJ\naUl3RjR0ak9BRmQvVk1GRnQxNmtYM00KLS0tIFlTU1p2OHhWUGlOWngwbE56NEhF\nRW5QSkVVUWZpdDZXWEIxZ1BkbzVwclEK2P25nBgf8255vaKW/+T97aNTecRgNjLu\nedIUiPdXbFATCe3v/YRo6sqzFwIsvM6Bl9yHh/SXo6Ftc7eWZZd8zQ==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1hrx8qj02fj2ea6d4g9vqhyj9hl7fppkjqfdx2l37py3h6pdkr95s8n8rvs"
}
],
"lastmodified": "2026-07-28T01:44:24Z",
"mac": "ENC[AES256_GCM,data:J0D8bEs5mHLraLS6TvYuCgfiNU1xKM2Yfb5Y0f/q/4wM4LzXufNzv3+SWDHumTe328U8UnNXLqjNHEKL0bZi0coxpU5hVM+BvPcmqD72vscETzbQ2hnU05sfW+XjfZhcN8/ke0bpLt7nP0crD5hsZv3esV1E2UWvzjEiYtWzFHY=,iv:lcmXYG2H469UKBYDndWKMO+GP0mSGLztenm+kBaUdYI=,tag:ujiXbLM9CUsuoFwQQWI84Q==,type:str]",
"version": "3.13.2"
}
}
+22
View File
@@ -0,0 +1,22 @@
{
"data": "ENC[AES256_GCM,data:Q++XWxg9tvY7ugT8+8FWCC5jgOfQ1+LYLsnqN0/WGxTf5XT2VmoXvszcE/ow2BUOBG3qBTXS3OHYFPwmj1GgaBHB8rpdXX6+LveSBE2gmx1VR+NUDTxy+0/DBq411MK9n/J9eIYcybdFIE11biFSAob9EgfxBF5roCDXIPDPyVCSe6LyhNvqYPnGQsfHCbejSewLTcRQEiguP9BX96CpMPIpmaB9fHN25t5RWCgMI7MtacrRxRsyKg44+2FZstXdZrp2Wv9u86BxqdAFqtZE8qpPeGdrdzluZx9jhnw0wZPzHdKg5wS7/UrLCb0UxIQiDxDMDuuBuLGkKXfAhb6SGZU41wWAWYk548iGRUaG+79BO4HhRZNObOFvfsjpMXEfcH/Vbv/wHVY4OpJUPe/ZWK4wpL9YrY4nT0t62HH7MirOy1uhwLE50h2+6dHKj6ur5G7thkSqgzVWXQ==,iv:zaRBwS+gfXLhH30havn6Q2+oPWuLV3qBfbOj00kewlQ=,tag:Vr5iEQ2u+9YNahryhgzwSw==,type:str]",
"sops": {
"age": [
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSArTGJnaVhleUtsWnlITE1s\nNmRCaW1QWTFNSG5LRFdmb1lzRlV5NWl3YTBNCmF6eUN6RkJBZzc0MmJJa0dKTW01\ncVh4K1VLR2lURUpKQXpxNGpQNnpSUlUKLS0tIFJONnJFWkNCR3pqalRsUW9POVBj\nQ0pFQ3ltKzBETTVXTW5sV1ppWTFJc1kKzxUboNZO+Nwn2eTWy11VP9w1pRswCHaJ\nE2dYU0oUOClVzc0oSuIJxraG6TPj1N4WGC24gS+UmpkmSuCiOeZBsw==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBDSmxNR1I3dUFKT0xUVG9h\nWkRIakNVeWRQOEN3blNRVjZlWHF4K2NRa0hBClRiOXlmTTJ4T2JTUEw2c1l0R2N2\nMnRwdDA5bEZlQWJRTm9vUmNKclBSU1EKLS0tIFcyeDFjbTZyVEVDUjN1VzU1VHly\nNWNDMW9rTXY2bHNWYVR0SmtMckovUzQKhTWr6yFVW9am3okCiIswwqR5+/p9OLmB\nWCgPtwoFaBt1RjUXPK4/eS4LlucR2K6V/mNMn4xVsnkIl193U9632g==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age16j42pdc5dr6wnj7xayhkqdj2rny9u68fcqejs50hqq42scssh4gsnrrnlt"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA2ME9CbmVGcENRWksyL0pW\nOEJyUGhpbGMwWlBhVXBSeXQ2MW1EWnFuR0E4CnMwU0pjdk1YMzF5ZEhTVFlBaHZq\nam94UWVGbjhZSEx6VHBmem9JRWgwYzAKLS0tIHFJZWRyRjRHNzhXdDJSYWN3bDlR\nYVp3eGJWWkh3Y09ZWElyclZQN1ZSVFkKjR32//EcFAdMjVlNgky5zvVkwXwEN68D\nrkTuHKjiO5aV7yAQGPkdNw0UM0oRGF0u4YF3oOUcZfSvnKgDeoi2Zw==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1ug787sgt6st6k82fgkrug2lzltw4qsukrrqqs3w27ewwqj8rg4hsxcmylz"
}
],
"lastmodified": "2026-07-28T00:27:46Z",
"mac": "ENC[AES256_GCM,data:AbJIHYcFpeanQsJ3x7RPL9Yjlg5BJgkepKax0fL9L/PpA03Antab93iUNG95Mp6k/duovp8Jm445lbuppDZq1dh9ij/deBa8GbzJ50wwEe9zMc3EwRKScpqZEhRPF7KlJsIjsHJyd8NkcI5ji49XkHb4Ae1//8zG5HpVgy+3b04=,iv:uxQCbMwMIfP5S1dbsvIx3F79YWEguxwox8T0YZvUBdc=,tag:3utjmBGDmPc8q4JjaXvCkA==,type:str]",
"version": "3.13.2"
}
}
+26
View File
@@ -0,0 +1,26 @@
{
"data": "ENC[AES256_GCM,data:aqlMnoVkGtH9z3fJRweeC0OYf7LGqJU2sWA9Q25dKK6NuNyJd4BvjPtpfeg/WhVtJsaOtcbwVm4WAhVK9FARE8g8j+vmq0f6BAU4s6mx0ZIhl+mP+/hIpt//LOdd+9YezelJxdpzUyZbdAngU99rsTluLRe2XmZ7Fquxd8yH/OHenSDY6dizp9+5jfEi8EU+EmuXvuWMPY59xnlnqYNPfSFxs43/pS402LzJoJ5H+cBPprddkUBVzy4cBQvMnrRFUSjnqp74ovZkfIWFqDWQ5YgSU2PjatBg18oulZ7wNRhQ6OLqj6gsu+xrMjNFwnp7rMlA3X//hIidxTkVcYITycXd8KzuMIaofUpnwoyT34fy6+H35/39iiEyG4LRTrOOKRDzXkY2rhJUxFSZ8GlhNhMd0RlkmLngVYrtjsswJ9meIwoAFLPYt7BC61PJf0TXdtk=,iv:mCA819J9LpAOj8QxFAkrHI9wFJIy8qVxv31D6IwWFnk=,tag:qqMtM0eyHbQEyl6ND/wf7g==,type:str]",
"sops": {
"age": [
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBOZVpRYmNMQ1E4ZlFXMDVq\nbW1FcnYzWTBHQmdhSjlsZUtZK3dzNUZjY1FvCkV4VXU4MTcwNVZoZUpVVS9JeHE5\nbGk3UzE3YmpZQ1JISHV0RHJqSG9ZNXcKLS0tIHhBdnIvMjJkeWlVRE9Fb0FhWjNX\nUjBVWDltK2w0akkwOTJaTGNSWWNrRXMKqZRNnHiXvn1QBoSGdABp7vOqNlsEN6Xr\nDp3NByXow6PuRuWvQXHzd+WC+ADkwNaaiT6TUrbZcd/Pl8Ges9kcZg==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA2VFBxc2ZMUFp0YkJhVFhW\nc0ZNbnJUcGtkT1VLR2YrVGhRRFVTZFlyZXlJCmVnblNBNGxIdHh4Q0IweWR1b0dq\nRWFyOURuWkdkRE1RTnJRMEpXdk9HaUUKLS0tIFhKV3FoWW1zRk1pMlhuWWlhV2E5\nQzJTRHAyc0JtSjd2NHlJODZVbndaVDgKFA4565X/4FqNq/fZDZTg81/55hZi4c7b\nTti2AnyE3OcY/kurXJFHRinVMqURQf1fx9MxqUYRitiCz4qe5zFF+A==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1sweerhrga9yf8x6sv0apz4ed4g48rnlcq34rpv20t0rcelwgpgeqwvndzz"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSAwRWlKTFNocnBRN01pZ0hm\na3pyRUkxMWM3dE1iTkZZcGRYUFcyb1RDb2h3Ckt4blpGZHBjcnZ4SVE5UnF4cmY4\nWW0rZG5wUkZINVk5a2lmSzN2L3JJY1kKLS0tIExpWGlBRFZJVGpGbFhxRE5ZYjBo\nQVliTlFIZ1U5dE9xbDhHMUtxenpBSm8KY6sIFEfK8p+70IXsC4Jwb9Lm/pd9+V6K\n4JAzGrpA6mAuIwwSNnbdcA5j8FmBhCpK6nLBWmFhGm9Y+MRTaM7Jrw==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1nruncs4l0ufk7yuc4des8p99c0alfndl0lhsws8tycl5pplfp56s30af5f"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBoV0pIUXlyOFFTUHVTdllu\neG10VENOYWl5Wk0ycnpLUytTbnlrQ25pMkFRCnhyRU5xWW9vQXJJOHdFMGZqMkR1\nSktqT3lOdVVPRUN4YTlveGp0NXpqd0kKLS0tIGRaTktra0ZtSVpzSHBrY3VSSUph\nRVRZOSsxTTNmMmltMlJnVy9oT2VEWU0Krxf49B1BsrWn05fqg+cZ0k0PtfJJNfn0\nUL44RUWXWbK2igQHaIct9DfYe7DEonBJeROuxDYm8g7yNOv15S+P4Q==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1529taqdwr6t0w7cvzmty0d5y5593wffl0krt48j6uc4u39k56g2qf6ywtp"
}
],
"lastmodified": "2026-07-28T01:44:26Z",
"mac": "ENC[AES256_GCM,data:eyOSn03dzHSgkshPzLVwc95382eEFaDQarHs9l83dtcsb1Ui9CjkKipl2DVSUb6bdMUH1qKYmXqJhwFnAZbFZFjT4VTKtutNtM+OkhVXfT+fJs+1+u7k+ZUYFL9HuxKA6AWpwX3eJ8vmJDJZaAayJbm4PRzOyJywvKeneQqdUS0=,iv:QRKltR4qzVofo/Elt2Us/lrHlD7BenX605X31x+Ng78=,tag:SZ97CcfgMJeu3yqNk8Y/cA==,type:str]",
"version": "3.13.2"
}
}
+26
View File
@@ -0,0 +1,26 @@
{
"data": "ENC[AES256_GCM,data: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,iv:kUlVXF4Yl5HGvoLwu9loiuuDVtz0kARRiUU3K+BPL2A=,tag:pVaGzQAX9Etoqc5XMGmNeg==,type:str]",
"sops": {
"age": [
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSB6OUVUdkoxM1M5THlYZ1ky\nYWJ5RjhtRGoxTldwRkI2T1p6dHR4Y3gwR1ZrCjRDS1hTM01lZ0FSalBYQ1B0bENs\nUytXNmlrUkV4TmJkMUM1QW1ZaExIcGMKLS0tIHdHKzdEcUxvM0ZYUEp0a2d6SHp5\nYXQydy9uNG15V2FhUUd4NEFTMTNNMEUKkIzKEoYzoVs+nhnpkHFgDkQqrWykatND\ntsNxcr1SXSKeEW1m/QpXZnn/aW3zSQR09PqOHf7PYU47/AdkwrUaAg==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSByZENrck42dWJjR2hYUVBl\ncERtRjR6dTdING5nWXlBc3o3eXFhaSs5NkFRCk43QXFUeTBJR0U5dG9YTDRmQ0Yx\naEo2blUvUXNZY3dpbEZRTUx1elNzdkkKLS0tIHJwNjRNM3V6WktWZ1BlUUtLRTNI\nMTVEbCtYbllIbTdxTGozWUluS3pIRXMKZCruDIkD/JofdAHWgPuaaKTDsz408ZkY\n77mhO8J+kd03qwt6qhFC5KF1lyjhwEnqrOE195+R/8Yl7hA/DsL2ZQ==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1k7d2du5mejsmv5rzavm4xwgpthqvcfsehduquv28nzs53zppa3kqngfxq2"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBxaC95RjYybzVlU2tYdHdU\naGJ4M2IvNkJwVlNIU0VCZEFUZk5VaksrVnpFCmJXS3luTG9WejR0Rk9DbHA3dngy\nRElFWjU1N2xuc3JaKzQ0L0U2Yktib1kKLS0tIFlrK3F0ZFh5Ync3ejVWMzRKTUx2\nZDhxdEMwa3B4TFZUcWdTdktDeGt1QUEKfgYnK2lW3cZuJGaw+bAKDipLuC4S5vK2\nxK2eJB5TP/xXrp0F3lx9sc2b1FOY9Vt9IQ7zVlBqJFkzJrcw8zYJJw==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1zhfyuzlq40reuqlr34gf77852nhs3t6mqfzrqmas8z6sxk7tcfhsungrm0"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBwOGFkSXNxTUIzLzR1Skk5\nMGZveHFDN3YwVmpwT3VTYkppWEU1aGVpdkhRCjZtRC92bVphd0ZFbzFxVzRUcGk4\nMUd1aWdEbFRaM01FT25JSVRoMTRsNUUKLS0tIDAybmcrYjFVWkFYaGY5TFZjcjFO\nYlZoQjJjN2lFNzd4RlJuSHFlRlNCOFEKgUIPnL2/OJgz9oMYt86/llHa7adTkhs6\n8yGYGV1wtU9aYtUMIR907SfYyZ6M4z8jH2wwzpQLbwQQMLgkejl1jg==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1f7usptjx9rv4rxauasve200gxtdt9jkqhhdqstlf20wvlm7u75rsjfw50m"
}
],
"lastmodified": "2026-07-27T23:14:51Z",
"mac": "ENC[AES256_GCM,data:CYhzR0Y29GXvWUBbb13s16v9hDQ4k4Xmd4FUpcyNtHe0L/IrDGkx1WHzAohNGZjGMNB9W3BgiEH85OoOo8r1F82El4/8s2prEJi8AARvQU3+2cmRjjhNCCYQWmJkoF/cZNpw6nVyWzZdfUpPvHjbuf6utlI3rtR0qiCpSo/32S0=,iv:XLKTU2Ute4jMkfRAbXiVGxqP9+fjSs6HwRv1JfTTe7w=,tag:oIqS/1HWQZ7mLWaO7GwLFA==,type:str]",
"version": "3.13.2"
}
}
+18
View File
@@ -0,0 +1,18 @@
{
"data": "ENC[AES256_GCM,data:QvViw/s1N7eIN3CoD27llEjriuSrohOou4Cv310nigcW8xMnA2SDN2id3H3AoKii1JlJ+qWpKn+gUmt5HOM0UlbeNe3os2RVwiX38O7eN9xFH9F5kA3TFs6Umqq3EoI586PwIVmB2LyxDnTeEEXVd7v5PFkBcfu7u8YIcNF7lpcj+6rOyHMB8uxPhrGep3yiKawFd9c9wWD0hlSSatV5tMHA1qmdK8VmDbCU/iuGwIoMzN1eZwGAXzG6LkCA63bUfdxU6yGuTboD+kN2Wbo+GZB0EACmiZoofl2wqlXuiw6qwTvlXkyauc9O5EG//PUkIECzDwiXcX+qSOM9DIBlZNth4ebhtic/PskyF09etL/gICz5YvV4ph5lyrWHq41KxljSU7QXOkGhzagruuMrYzhZb35wFH4Tie1ee2DXbGhreJr8V3Zse/zTMaD+iM57V8bvNcarTzOFXyKfp7Y=,iv:XBPhj2wT0k/yRCRHU4d+BQA/k00ZHWSKOucnZ5+PGys=,tag:Nh5MOxZIUXAYVZY5SZh/JA==,type:str]",
"sops": {
"age": [
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA0aUtETXlBMmRlTC9vK3NF\nRW4zS1FrSmo1dDN0OGN4SmV5ODd5MTRVejFJCnpPQkM2MVJ5WFlYRW1NVjduV1hv\nUWUzY0hHV05LV1BROVZVUlM2NldsTlEKLS0tIHFsTzI2SVZzYUtJWTM0MmFiUlVQ\neHEvUXgzc1pxSU1OZFo0cXhSZDdGUVEKpLVfzQEnntluUGsblnkHZJ9Jezu8tFte\nxEoV96GVHxUca6TFWpTLMqdR7NtuQGCkx295W3i1tkp58DP1OzRTUA==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age1njap586hc0q43kr03g6c8eqhdsmk8zcafkl3f83xwlc2gqhlmfgs4tmwad"
},
{
"enc": "-----BEGIN AGE ENCRYPTED FILE-----\nYWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSA4ZW5ybVBvTkxibWJMWGRL\nZ1lnWEkxZ3l6d0FWbmxMY2VsTVlzOHJJM3owClNYd3BlQi9pL1lIdzJmekJUVEVi\ncWhSK3ZkZEMyeTNoZlpTT0NMUXZFWVEKLS0tIHVkVlhmQXdRQktTK3J5dXZ4aTNt\ncUw3WCt5dXJhTkdUbVpmeWoxWkoxNnMKj4XtdwmgFVOiVsIJs2Du7QJ09A9tv/Lf\nkFOq8y4tlZe0nCwRjq43sVz7hdCTdQ0rsaWjBGY90LLkJbOA+f+Wrw==\n-----END AGE ENCRYPTED FILE-----\n",
"recipient": "age16kqfmvz4e23hmdlqresnyw69ej604s320mmd49h4hm3fhqchtgyqrws0k2"
}
],
"lastmodified": "2026-07-28T01:44:30Z",
"mac": "ENC[AES256_GCM,data:zR2WLWX7NaHA15gi4kX0jDvzUIe9jtz5bMCAggbPW+IXOEedPrddAHZ8OfPErVMfx8O1pJKkAKSzoPTAbEle54FisSLMHXp8fI0297MByJrF9pOsMFpVcDy/L4Q+pBzmB7aS9r7+u7KRVVTZT3QwG1rFWZaDs5dFTP80RhtCbWQ=,iv:ZzPoO+h7ebS+jsSH7tWMx6QK8umpa2/HFQmx9dnJN+Y=,tag:vG9+ifxw4HaBE6YsmOwXcg==,type:str]",
"version": "3.13.2"
}
}
+7 -1
View File
@@ -16,7 +16,8 @@
serverIp = "192.168.2.226"; # server (NFS/ZFS) Proxmox VM LAN IP
dockerIp = "192.168.2.225"; # docker Proxmox VM LAN IP
pbsIp = "192.168.2.244"; # Proxmox Backup Server LAN IP (not NixOS-managed)
domainControllerIp = "192.168.2.253"; # FreeIPA domain controller / primary DNS (not NixOS-managed)
domainControllerIp = "192.168.2.253"; # FreeIPA domain controller — authoritative DNS for sweet.home (not NixOS-managed)
ipaServer = "domain-controller.sweet.home"; # FreeIPA server hostname (used by security.ipa and Kerberos; must be a resolvable FQDN, not an IP)
# Cross-host references (LAN hostnames/users other hosts reach over the network)
nixCacheHost = "nix-cache"; # substituter/remote-builder hostname
@@ -79,6 +80,11 @@
# one-line change.
primaryUser = "nixos";
# Primary IPA/domain user. Home Manager is configured for this user on every
# IPA-enrolled host (see modules/ipa/client.nix) to manage the environment
# that IPA itself doesn't cover: dotfiles, user packages, session variables.
ipaUser = "wayne";
# HA file server cluster
# LAN IPs (vmbr0 / ens18) — client-facing: iSCSI initiators, NFS, management.
# Storage IPs (vmbr1 / ens19) — isolated internal bridge, used for DRBD