variables.nix's deployedTargets was a manually-maintained list with no
enforcement keeping it in sync with reality -- it caused two separate
false refusals in a row (naming a VM as deployed well after it had been
destroyed, then matching a target against itself once the list was
"corrected"). Static files can't track whether a resource still actually
exists.
create-proxmox-resource.sh's duplicate-host guard now queries the
Proxmox node directly (qm/pct's own name/hostname config, matched
against --host) instead. Also fixes a gap in that live check: it
originally swallowed ssh failures and would have silently treated "can't
reach the node" the same as "checked, nothing there" -- it now refuses
instead of guessing when the node can't be reached.
deployedTargets is removed entirely from variables.nix since nothing
else in the repo consumed it once this script no longer does; README.md's
Hosts table remains the sole source of truth for "(real, deployed)"
status. CLAUDE.md and the script's own --help/comments updated to match.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New build type dedicated to Tailscale exit-node capability, wired up for
linode/proxmox/lxc like every other build type (the lxc variant is the one
actually intended for deployment). Kept separate from the "server" host
rather than bundling exit-node capability onto it.
Trimmed modules/tailscale/exit-node.nix down to pure exit-node behavior:
dropped the old --advertise-routes=${vars.lanCidr} bundling (meaningless
for a Linode-hosted VPS with no path to the LAN), and switched
extraUpFlags -> extraSetFlags. Confirmed against nixpkgs' tailscale.nix
that extraUpFlags is only applied by tailscaled-autoconnect, which itself
only runs when services.tailscale.authKeyFile is set -- nothing in this
repo sets one, so the old flags would never have actually been applied.
extraSetFlags runs unconditionally via tailscaled-set on every boot, so
--advertise-exit-node self-reapplies once the operator has done the
one-time manual `tailscale up` auth.
Verified: all three new targets eval cleanly, nixpkgs-fmt/statix clean,
and a dry-run build of lxc-tailscale-exit-node's tarball resolves its full
closure including tailscaled-set.service.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01La55Nsss8jZ7ZuzUV9mfot
Two independent problems found while actually running the script:
1. nix build/nix-shell retry each unreachable substituter/builder up to
5x with backoff, per store path -- with nix-cache down this compounds
into minutes of noise. scripts/env.sh gains nix_extra_opts(), which
probes http://nix-cache and nixremote@nix-cache:22 once via plain
curl/TCP (bypassing Nix's own retry logic entirely -- confirmed
nix store ping still retries 5x even with a short connect-timeout)
and exports the decision so create-proxmox-resource.sh and the
sync-host-keys.sh subprocess it shells out to both reuse it instead
of probing independently.
2. The actual failure: "archive contains no configuration file". pct
restore expects a vzdump backup archive with embedded config;
config.system.build.tarball is a plain CT template tarball -- wrong
Proxmox mechanism entirely. Fixed to pct create against it as a vztmpl
template instead, uploaded to /var/lib/vz/template/cache/ rather than
/var/lib/vz/dump/. This same wrong claim had propagated into
docs/auto-installer.md, README.md, and CLAUDE.md from when the script
was first written -- corrected everywhere.
Also: checks for an already-uploaded image on the node (fixed
<flake_target>.tar.xz/.raw naming) before building, skipping build+upload
entirely if found (--force-rebuild to always rebuild).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01La55Nsss8jZ7ZuzUV9mfot
sync-host-keys.sh: generates/registers SSH host keys and their
.sops.yaml/secrets/*.yaml recipients for flake targets, idempotently.
--all, <target>, --remove, --regenerate-all-keys, all with --dry-run
(verified zero-side-effect via a sandboxed git-status check across every
mode). Only ever touches anchors with a corresponding host-keys/ file --
&admin and any hand-registered real-host anchor are never listed,
removed, or regenerated. Supersedes running prepare-host-key.sh one host
at a time for any target that already has a flake entry.
create-proxmox-resource.sh: builds a lxc-*/proxmox-* target's
tarball/disk image and creates it on a real Proxmox node, or reconfigures
an existing resource's cores/memory/disk (--modify, always requires
typing the VMID back to confirm). Refuses to create a new resource for a
VMID that already exists, and refuses to duplicate a host identity that
already has a real deployment elsewhere (variables.nix's new
deployedTargets, checked by hostName so it also catches cross-platform
duplicates) unless --allow-duplicate-host is passed. --dry-run throughout.
scripts/env.sh centralizes the Proxmox connection config both scripts
(and future ones) share. Also fixes an unrelated gap found along the way:
proxmox-* Disko image builds write their .raw file straight into the
repo root, and .gitignore never covered it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01La55Nsss8jZ7ZuzUV9mfot
Both existed only so the installer could boot as an LXC container and
nixos-install some other host from within it, but lxc-* targets are
already excluded from the install menu (nixos-install can't touch its
own running root filesystem), and now have their own direct tarball
path anyway. That left the installer's own LXC form with no real use
case, and packages.all with only two members worth bundling.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01La55Nsss8jZ7ZuzUV9mfot
Both check-nixos.yml workflows (GitHub + Gitea) now call
scripts/codex-maintenance.sh instead of a hand-rolled eval-only loop,
closing a real gap: CI previously enforced none of the secret grep,
nixpkgs-fmt, or statix checks that codex-maintenance.sh already runs
locally — nothing was stopping that from regressing. One script now
backs both, instead of two copies that can drift from each other.
codex-maintenance.sh itself is extended to cover buildable surface
that wasn't validated anywhere before: packages.x86_64-linux.*, plus
config.system.build.tarball (lxc-* hosts) and
config.system.build.diskoImagesScript (proxmox-*, excluding the
installer's own proxmox-lxc target, which has no disko config).
Also:
- scripts/prepare-host-key.sh: dropped the redundant
[path-to-nixos-repo] parameter — it always defaults to the repo the
script itself lives in now, so a second argument never made sense
after the nix-auto-installer migration.
- Removed prepare.sh (dead pre-disko manual parted/mkfs/mkswap
partitioning, fully superseded) and
scripts/create-linode-installer-disk.sh (incomplete draft for an
abandoned dd-via-rescue-mode approach; Linode hosts already deploy
fine through the normal auto-installer flow).
- docs/pxe-boot.md: fixed a stale `nixosConfigurations.pxe-boot` eval
command (pre-refactor flat name, not a real flake attribute
anymore) and added a cross-reference to docs/auto-installer.md.
- CLAUDE.md/README.md: full documentation pass reconciling this
session's changes — modules/installer/, modules/pxe-boot/, the
LXC/Proxmox image-building deployment paths, corrected the
password-hash/SSH-key locations in the safety-rules section (both
had drifted to reference files/paths that no longer exist), and
added session-workflow guidance to prefer targeted host evals over
full-repo sweeps for incremental changes (explicitly scoped to
interactive sessions, not CI).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01La55Nsss8jZ7ZuzUV9mfot
CLAUDE.md's "Composition pattern" section still described the
pre-refactor layout (hosts/<host>/configuration.nix as a thin imports
list, hardware-configuration wired in from flake.nix) from before the
platform x build-type matrix landed. Rewrite it to match the current
mkTarget/host.nix architecture and the module moves from the prior
commit. Also fixes docs/nix-cache.md, which referenced a
modules/nix/ path that never existed in this repo.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01La55Nsss8jZ7ZuzUV9mfot
Remove the nonexistent kuma host and add the missing linode-minimal
host across README, AGENTS.md, docs, and CI eval workflows so they
match flake.nix's nixosConfigurations. Also add CLAUDE.md with
architecture/safety guidance for future Claude Code sessions.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
beatzaplentyandClaude Sonnet 5