Documentation fixes:
- README/AGENTS: rename tailscale-exit-node → tailscale-router, add ha-server
build type and proxmox-ha-server-{1,2} host table rows, add baremetal to
platform list, remove references to non-existent flake-target-refactor-spec.md
and remove-sensetive-info-refactor.md
- docs/auto-installer.md: fix lxc-tailscale-exit-node → lxc-tailscale-router,
add pxe-minimal to the flake outputs list
- variables.nix: fix domainControllerIp comment — IPA is the authoritative DNS
at .253 (Pi-hole is gone), not a forwarding intermediary
Code deduplication:
- Extract duplicate SSH host-key preservation activation scripts from
modules/platforms/lxc.nix and modules/platforms/proxmox.nix into a shared
modules/common/preserve-ssh-host-key.nix; both platforms now import it
- Replace 8-line hand-enumerated NFS export lists in server.nix and ha-server.nix
with a mkNfsExports helper that generates exports from vars.nfsShares — adding
a share to variables.nix now propagates to both exporters automatically
Dead code removal:
- modules/common/configuration.nix: remove leftover NixOS skeleton comments
(hardware-configuration import, grub lines) that were never used
- modules/docker/enable-service.nix: remove commented-out listenOptions and
daemon.settings blocks
- hosts/server/host.nix, hosts/nix-cache/host.nix: remove #DOCKER_HOST comments
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
modules/ipa/client.nix is now a self-contained NixOS module (no longer a
parameterized function): it checks builtins.pathExists for
secrets/<hostname>.keytab at eval time and enables itself automatically if
found, making it a no-op for hosts without a keytab.
modules/common/configuration.nix imports it so every host in the flake is
a candidate for IPA enrollment — no per-host wiring needed. Adding a
keytab (via scripts/ipa/create-nixos-ipa-host-account.sh) is now the
only step required to enroll a host.
The module also sets networking.domain and networking.nameservers via
mkDefault when active, so new hosts don't need those set explicitly.
Also:
- Remove explicit IPA imports from hosts/nix-cache and hosts/tailscale-router
- Add secrets/pxe-boot.keytab + creation rule; remove incorrect
secrets/nixos.sweet.home.keytab and its creation rule
- Add .sops.yaml creation rules for all remaining host keytabs
(server, docker, tor-relay, nix-minimal, nixos) so the creation script
can target them without manual .sops.yaml edits
- Fix duplicate tailscale-router.keytab rule and corrupted gui.yaml comment
block in .sops.yaml
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds modules/ipa/client.nix — a parameterized module that joins a NixOS host
to the sweet.home FreeIPA domain without ipa-client-install. It configures
security.ipa (SSSD, Kerberos, PAM, NSSwitch) and places a pre-provisioned host
keytab via sops-nix binary secret so enrollment is fully reproducible from the
flake.
- variables.nix: adds ipaServer (FQDN of the FreeIPA KDC; security.ipa.server
requires a hostname, not an IP, for Kerberos/TLS)
- certs/ipa-ca.crt: placeholder for the IPA CA public certificate (operator
replaces with: curl http://<ipa-server>/ipa/config/ca.crt)
- secrets/nix-cache.keytab: placeholder binary sops file (operator replaces
with the encrypted keytab after ipa host-add + ipa-getkeytab)
- .sops.yaml: adds creation rule for secrets/nix-cache.keytab (same recipients
as secrets/nix-cache.yaml)
- hosts/nix-cache/host.nix: imports the IPA client module; adds
networking.domain so the host's FQDN resolves correctly
Module header documents the three operator steps needed per host before deploy.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds static IP configuration to every NixOS host in the flake that
has a fixed LAN address, and centralises all network primitives
(IPs, gateway, prefix length, interface names) in variables.nix so
there is one place to update if any of them change.
variables.nix additions:
- lanGateway / lanPrefixLength — LAN gateway and /24 prefix, replacing
every hardcoded 192.168.2.254 / 24 across host files
- lxcLanInterface / vmLanInterface / vmStorageInterface — NIC names for
LXC containers (eth0), Proxmox VMs (ens18), and the HA storage NIC
(ens19), used as attribute keys so changing the name is a one-line edit
- haStoragePrefixLength — /29 for the storage subnet, mirrors haStorageCidr
- Per-host IP variables: nixCacheIp (.224), tailscaleRouterIp (.222),
torRelayIp (.221), serverIp (.226), dockerIp (.225)
host.nix changes:
- tailscale-router, tor-relay, nix-cache, pxe-boot: useDHCP = false,
static address on eth0 (lxcLanInterface), struct-form defaultGateway
(required when using systemd-networkd which LXC containers use)
- server, docker: useDHCP = false, static address on ens18 (vmLanInterface),
struct-form defaultGateway (works for both scripted networking and networkd)
- ha-server-1, ha-server-2: replace hardcoded 192.168.2.254 / 24 / 29
with the new variables; no functional change for these hosts
modules/build-types/pxe-boot.nix:
- Domain-controller kickstart template: replace hardcoded 192.168.2.138
and 192.168.2.254 with vars.domainControllerIp / vars.lanGateway /
vars.lanPrefixLength / vars.homeDomain so the template stays correct
if the DC IP or domain is ever changed again
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01ULXzafSDwGhmFGnn3LtDSQ
hosts/server/host.nix and hosts/nix-cache/host.nix each hand-rolled the
same sops secret/template/environmentFile wiring for the beszel agent
token, differing only in the sops file path and template name. Factor
it into modules/beszel/host-token.nix ({ name, sopsFile }) so a third
host can adopt it without copy-pasting the boilerplate again. Also
drops two dead, stale commented-out HUB_URL lines left over from
before variables.nix grew a homeDomain var.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01La55Nsss8jZ7ZuzUV9mfot
One file (variables.nix) holding every value that was previously
hardcoded and repeated across modules: LAN domain/CIDR, home/tailnet
domains, cross-host references (nix-cache substituter hostname, NFS
server hostname, remote-builder user), PXE/PBS IPs, timezone, and the
primary username.
Wired in via flake.nix's specialArgs (and home-manager's
extraSpecialArgs for the two home.nix files), so any module picks it
up by just adding `vars` to its function arguments — no explicit
import needed. Two hosts (nix-cache, server) now derive their own
networking.hostName from the same variable other hosts use to reach
them, so there's exactly one place to change either identifier.
Purely mechanical: every substituted value matches what was already
there, confirmed by identical toplevel .drv paths for all 17 targets
before and after.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Audited the working tree and full git history for committed secrets
(gitleaks + trufflehog + manual grep, see secrets-inventory.md, kept
local/gitignored per the spec). Found: a password hash shared by root
and the nixos user across every host, two live Beszel monitoring
tokens, and a GitHub fine-grained PAT embedded in a home-manager
nix.conf.
Migrates all of them to sops-nix:
- .sops.yaml + secrets/*.yaml, encrypted for admin + the age keys
derived (via ssh-to-age) from each live host's existing SSH host
key — no new key material transferred to any machine.
- users.users.{root,nixos}.hashedPasswordFile replaces the inline
hashedPassword shared by every target.
- The GitHub PAT moves from a home-manager-managed, store-visible
nix.conf to a sops.templates-rendered file included via nix.conf's
native !include, system-wide instead of per-user.
- Beszel TOKEN moves from `environment` (store-visible) to
`environmentFile` (runtime-only via sops.templates); the dead
commented-out docker token is removed from the tree entirely.
Added a tracked pre-commit hook (gitleaks protect --staged, wired via
core.hooksPath) so a secret can't be committed by accident again, and
documented the sops workflow in README.md.
Structural verification only: all 17 flake targets evaluate, and
`nix build --dry-run --no-link` succeeds for the three currently
deployed hosts. Per CLAUDE.md, actual `nixos-rebuild switch` — the
step that confirms secrets decrypt and services start on a real
machine — is left for manual verification.
Git history still contains the original plaintext secrets; scrubbing
history (Milestone 3) and rotating every credential (Milestone 4) are
separate, deliberately gated steps per remove-sensetive-info-refactor.md.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Generates all nixosConfigurations from mkTarget(platform, buildType,
hostPath) instead of hand-written per-host blocks, so adding a new
platform or build type is a one-line addition. Per-machine identity
(hostname, hostId, secrets, stateVersion) moves into hosts/<name>/host.nix;
platform-specific config (hardware, boot, networking) into
modules/platforms/*.nix; build-type config (minimal/server/docker/gui/
nix-cache/pxe-boot) into modules/build-types/*.nix.
Old flat targets (nixos, docker, server, nix-cache, nix-minimal, pxe-boot)
are replaced by the 17-target <platform>-<buildtype> matrix; each new
target was verified to evaluate before its old counterpart was removed.
CI workflows and docs/aliases now discover hosts dynamically via
nixosConfigurations attrNames and /etc/flake-target instead of hardcoded
lists, so they can't drift from flake.nix again.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
beatzaplentyandClaude Sonnet 4.6