sync-host-keys.sh: generates/registers SSH host keys and their
.sops.yaml/secrets/*.yaml recipients for flake targets, idempotently.
--all, <target>, --remove, --regenerate-all-keys, all with --dry-run
(verified zero-side-effect via a sandboxed git-status check across every
mode). Only ever touches anchors with a corresponding host-keys/ file --
&admin and any hand-registered real-host anchor are never listed,
removed, or regenerated. Supersedes running prepare-host-key.sh one host
at a time for any target that already has a flake entry.
create-proxmox-resource.sh: builds a lxc-*/proxmox-* target's
tarball/disk image and creates it on a real Proxmox node, or reconfigures
an existing resource's cores/memory/disk (--modify, always requires
typing the VMID back to confirm). Refuses to create a new resource for a
VMID that already exists, and refuses to duplicate a host identity that
already has a real deployment elsewhere (variables.nix's new
deployedTargets, checked by hostName so it also catches cross-platform
duplicates) unless --allow-duplicate-host is passed. --dry-run throughout.
scripts/env.sh centralizes the Proxmox connection config both scripts
(and future ones) share. Also fixes an unrelated gap found along the way:
proxmox-* Disko image builds write their .raw file straight into the
repo root, and .gitignore never covered it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01La55Nsss8jZ7ZuzUV9mfot
nix-serve's secretKeyFile was a manual, undocumented-outside-a-comment
`nix-store --generate-binary-cache-key` step per host -- easy to miss on
a fresh nix-cache instance (as lxc-nix-cache testing just found: systemd
fails the unit with EXIT_CREDENTIALS when LoadCredential can't find the
source file, which nginx then reports as a 502 from clients). It also
can't be regenerated per-host safely: modules/nix-cache/client.nix
hardcodes every client's trust in one specific public key, so every
nix-cache instance has to share the exact same keypair.
Sourced from secrets/nix-cache.yaml's new cache-priv-key entry instead,
via the same sops-nix pattern every other secret in this repo already
uses. Verified the added value derives to the exact public key
modules/nix-cache/client.nix already trusts before committing.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01La55Nsss8jZ7ZuzUV9mfot
Linode provisions and sizes /dev/sda (root) and /dev/sdb (swap) itself
as whole, unpartitioned block devices before the OS ever boots.
modules/disko/linode.nix declares them with destroy = false (skips
Disko's wipe stage for these disks entirely) and a bare filesystem/swap
content type matching that existing layout, so re-running it against an
already-provisioned disk only mkfs/mkswaps if blkid shows it isn't
formatted yet -- never repartitions or destroys data.
With every host reachable through the installer menu now carrying a
Disko config, auto-install.sh no longer needs to probe the flake and
branch between `disko --mode destroy,format,mount` and a bind-mount
fallback -- it just always runs Disko.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01La55Nsss8jZ7ZuzUV9mfot
Both existed only so the installer could boot as an LXC container and
nixos-install some other host from within it, but lxc-* targets are
already excluded from the install menu (nixos-install can't touch its
own running root filesystem), and now have their own direct tarball
path anyway. That left the installer's own LXC form with no real use
case, and packages.all with only two members worth bundling.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01La55Nsss8jZ7ZuzUV9mfot
Both check-nixos.yml workflows (GitHub + Gitea) now call
scripts/codex-maintenance.sh instead of a hand-rolled eval-only loop,
closing a real gap: CI previously enforced none of the secret grep,
nixpkgs-fmt, or statix checks that codex-maintenance.sh already runs
locally — nothing was stopping that from regressing. One script now
backs both, instead of two copies that can drift from each other.
codex-maintenance.sh itself is extended to cover buildable surface
that wasn't validated anywhere before: packages.x86_64-linux.*, plus
config.system.build.tarball (lxc-* hosts) and
config.system.build.diskoImagesScript (proxmox-*, excluding the
installer's own proxmox-lxc target, which has no disko config).
Also:
- scripts/prepare-host-key.sh: dropped the redundant
[path-to-nixos-repo] parameter — it always defaults to the repo the
script itself lives in now, so a second argument never made sense
after the nix-auto-installer migration.
- Removed prepare.sh (dead pre-disko manual parted/mkfs/mkswap
partitioning, fully superseded) and
scripts/create-linode-installer-disk.sh (incomplete draft for an
abandoned dd-via-rescue-mode approach; Linode hosts already deploy
fine through the normal auto-installer flow).
- docs/pxe-boot.md: fixed a stale `nixosConfigurations.pxe-boot` eval
command (pre-refactor flat name, not a real flake attribute
anymore) and added a cross-reference to docs/auto-installer.md.
- CLAUDE.md/README.md: full documentation pass reconciling this
session's changes — modules/installer/, modules/pxe-boot/, the
LXC/Proxmox image-building deployment paths, corrected the
password-hash/SSH-key locations in the safety-rules section (both
had drifted to reference files/paths that no longer exist), and
added session-workflow guidance to prefer targeted host evals over
full-repo sweeps for incremental changes (explicitly scoped to
interactive sessions, not CI).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01La55Nsss8jZ7ZuzUV9mfot
modules/disko/proxmox.nix gains imageSize (20G default) and a
per-host imageName (networking.hostName, so every proxmox-* host
produces a distinctly named image instead of an identical main.raw).
This is the same disko.devices config already used to format a real
disk on install, so it's available for every proxmox-* target with no
per-host changes needed:
nix build .#nixosConfigurations.<host>.config.system.build.diskoImagesScript
sudo ./result --build-memory 2048
docs/proxmox-images.md covers building, host-key pre-seeding via
disko's --pre-format-files (same host-keys/ workflow as the installer
and LXC tarball paths), and the qm import/attach sequence for
deploying the result to Proxmox.
Also fixes a real bug in auto-install.sh found while testing: the
disko confirmation bypass used --yes, which disko's CLI doesn't
recognize at all (the actual flag is --yes-wipe-all-disks) — so the
"skip confirmation" flag was silently a no-op and the interactive
prompt kept appearing regardless.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01La55Nsss8jZ7ZuzUV9mfot
LXC hosts (device busy fix):
modules/platforms/lxc.nix now imports nixpkgs' own
virtualisation/proxmox-lxc.nix, giving every lxc-* host a real
config.system.build.tarball output — a directly `pct restore`-able
Proxmox container image. This is the actual bug fix behind the
"cannot remove real root directory: device busy or in use" error:
lxc-* targets were only reachable through nixos-install, which
bind-mounts / onto /mnt for containers (no raw disk to partition)
and then correctly refuses to modify the filesystem it's currently
running on. auto-install.sh's menu now excludes lxc-* targets
entirely (they deploy via nix build + pct restore instead, see
docs/auto-installer.md) — and, on the same reasoning, also excludes
`installer`/`proxmox-lxc`, which are the installer image's own flake
targets, not deployable hosts.
manageHostName = true keeps host.nix's declared hostnames (upstream's
default would let Proxmox's ambient container config win instead);
privileged = false matches how these containers are actually created.
Eval warnings, now zero across all 19 nixosConfigurations + 4 packages:
- Multiple password options (root/nixos in the installer): nixpkgs'
own installer profile sets initialHashedPassword = "" for
passwordless login, conflicting with our explicit hashedPassword.
Force-nulled the upstream option rather than adopting passwordless
login, since this image now also boots over LAN PXE with
PasswordAuthentication enabled.
- boot.zfs.forceImportRoot default value: set explicitly to false
(matching the two places that already did) in
modules/common/configuration.nix and modules/installer/common.nix,
covering every host and the installer alike.
- Deprecated pkgs.system in modules/build-types/gui.nix: switched to
pkgs.stdenv.hostPlatform.system.
All confirmed non-behavioral where it matters: unrelated hosts'
drvPaths are byte-identical to their pre-existing baselines throughout.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01La55Nsss8jZ7ZuzUV9mfot
Finishes the nix-auto-installer migration: scripts/prepare-host-key.sh
and the local host-keys/ directory (gitignored, private key material,
never committed — moved as plain files, not through git history)
weren't carried over in the initial migration.
Also implements automatic key staging, replacing the manual
scp-after-boot step:
- modules/installer/host-keys.nix reads host-keys/ via
builtins.getEnv, which Nix silently returns as "" under normal
(non---impure) evaluation — the module is a no-op by default, safe
for CI, until explicitly opted into:
NIXOS_HOST_KEYS_DIR=$(pwd)/host-keys nix build .#iso --impure
When built this way every key present gets baked into the image at
/etc/host-keys/, and auto-install.sh installs whichever one matches
the flake target selected at install time — no manual per-host scp.
- This deliberately includes the PXE netboot variant, even though
pxe-boot serves it unauthenticated over LAN HTTP: accepted
explicitly as a reasonable trade-off for a network that sits behind
LAN-only infrastructure, not the open internet. auto-install.sh
still falls back to /root/host-keys (manual scp) if a key isn't
baked in, so images built without --impure keep working exactly as
before.
- docs/auto-installer.md replaces nix-auto-installer's README,
updated for in-repo paths and the new build flow.
Verified: normal `nix eval` (no --impure) evaluates identically across
all 19 nixosConfigurations + 4 packages with zero host-keys/* entries
(CI-unaffected); with --impure + the env var set, all three installer
variants (installer/ISO, proxmox-lxc, pxe) correctly embed every key
in host-keys/.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01La55Nsss8jZ7ZuzUV9mfot
Adds debian@surface's existing SSH key (already used as its admin
key elsewhere in this repo) to vars.remoteBuilderAuthorizedKeys so
nix-cache will accept it as a distributed-build client once deployed.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01La55Nsss8jZ7ZuzUV9mfot
CLAUDE.md's "Composition pattern" section still described the
pre-refactor layout (hosts/<host>/configuration.nix as a thin imports
list, hardware-configuration wired in from flake.nix) from before the
platform x build-type matrix landed. Rewrite it to match the current
mkTarget/host.nix architecture and the module moves from the prior
commit. Also fixes docs/nix-cache.md, which referenced a
modules/nix/ path that never existed in this repo.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01La55Nsss8jZ7ZuzUV9mfot
Generates all nixosConfigurations from mkTarget(platform, buildType,
hostPath) instead of hand-written per-host blocks, so adding a new
platform or build type is a one-line addition. Per-machine identity
(hostname, hostId, secrets, stateVersion) moves into hosts/<name>/host.nix;
platform-specific config (hardware, boot, networking) into
modules/platforms/*.nix; build-type config (minimal/server/docker/gui/
nix-cache/pxe-boot) into modules/build-types/*.nix.
Old flat targets (nixos, docker, server, nix-cache, nix-minimal, pxe-boot)
are replaced by the 17-target <platform>-<buildtype> matrix; each new
target was verified to evaluate before its old counterpart was removed.
CI workflows and docs/aliases now discover hosts dynamically via
nixosConfigurations attrNames and /etc/flake-target instead of hardcoded
lists, so they can't drift from flake.nix again.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Remove the nonexistent kuma host and add the missing linode-minimal
host across README, AGENTS.md, docs, and CI eval workflows so they
match flake.nix's nixosConfigurations. Also add CLAUDE.md with
architecture/safety guidance for future Claude Code sessions.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
