esphome:
  name: esphome-waynes-room
  friendly_name: ESPhome Wayne's Room

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: arduino
    version: 2.0.6

# Enable logging
logger:
# Enable Home Assistant API
api:
  encryption:
    key: "bZd2q2XkmQH/o/+Jz+gZKMFM8VGA0NRheWp/uYvQRho="

ota:
  password: !secret ota_password

wifi:
  networks:
    - ssid: !secret ssid_garage
      password: !secret wifi_password
    - ssid: !secret ssid_house
      password: !secret wifi_password
  domain: .alm.lan
  
  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "esphome-waynes-room"
    password: "lHNYq8KWKSJv"

captive_portal:

time:
  - platform: homeassistant
    id: homeassistant_time
    timezone: Australia/Brisbane

i2c:
  sda: 17
  scl: 18
  scan: true
  id: bus_a


binary_sensor:
  - platform: status
    name: "Availibility"
  - platform: gpio
    pin:
      number: 8
      mode:
        input: true
        pullup: true
    name: "Motion Detection"


sensor:
  - platform: wifi_signal
    name: "WiFi Signal Strength"
    update_interval: 60s
  - platform: uptime
    name: Uptime
  - platform: bh1750
    name: "Light Level"
    address: 0x23
    update_interval: 5s
  - platform: internal_temperature
    name: "Internal Temperature"

button:
  - platform: restart
    name: "Reset"